Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix the following out-of-bounds warnings by embedding existing struct
htb_rel_query into struct mpt3_addnl_diag_query, instead of duplicating its
members:
include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds]
include/linux/fortify-string.h:22:29: warning: '__builtin_memset' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a bunch
of struct members adjacent to each other in a single call to memcpy(). All
those members are exactly the same contained in struct htb_rel_query, so
instead of duplicating them into struct mpt3_addnl_diag_query, replace them
with new member rel_query of type struct htb_rel_query. So, now that this
new object is introduced, memcpy() doesn't overrun the length of
&karg.buffer_rel_condition, because the address of the new struct object
_rel_query_ is used as destination, instead. The same issue is present when
calling memset(), and it is fixed with this same approach.
Below is a comparison of struct mpt3_addnl_diag_query, before and after
this change (the size and cachelines remain the same):
$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
struct mpt3_ioctl_header hdr; /* 0 12 */
uint32_t unique_id; /* 12 4 */
uint16_t buffer_rel_condition; /* 16 2 */
uint16_t reserved1; /* 18 2 */
uint32_t trigger_type; /* 20 4 */
uint32_t trigger_info_dwords[2]; /* 24 8 */
uint32_t reserved2[2]; /* 32 8 */
/* size: 40, cachelines: 1, members: 7 */
/* last cacheline: 40 bytes */
};
$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
struct mpt3_ioctl_header hdr; /* 0 12 */
uint32_t unique_id; /* 12 4 */
struct htb_rel_query rel_query; /* 16 16 */
uint32_t reserved2[2]; /* 32 8 */
/* size: 40, cachelines: 1, members: 4 */
/* last cacheline: 40 bytes */
};
Also, this helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines on
memcpy().
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/60659889.bJJILx2THu3hlpxW%25lkp@intel.com/
Link: https://lore.kernel.org/r/20210401162054.GA397186@embeddedor
Build-tested-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use devlink_health_report() to push error indications.
Implement this in qede via a callback function to make it possible to reuse
it for other drivers sitting on top of qed in future. Also remove forcible
recovery trigger and put it as a normal devlink callback in qed module.
This allows user to enable/disable it via:
devlink health set pci/xxxx:xx:xx.x reporter fw_fatal auto_recover false
Link: https://lore.kernel.org/r/20210331164917.24662-3-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Devlink instance lifetime was linked to qed_dev object. That caused devlink
to be recreated on each recovery.
Change it by making higher level driver (qede) responsible for lifetime
management. This way devlink survives recoveries.
qede now stores devlink structure pointer as a part of its device object,
devlink private data contains a linkage structure, qed_devlink.
Link: https://lore.kernel.org/r/20210331164917.24662-2-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV
further below). Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru
Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code. Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru
Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code. Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru
Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit df2d8213d9e3 ("hisi_sas: use platform_get_irq()") failed to take
into account that irq_of_parse_and_map() and platform_get_irq() have a
different way of indicating an error: the former returns 0 and the latter
returns a negative error code. Fix up the IRQ checks!
Link: https://lore.kernel.org/r/810f26d3-908b-1d6b-dc5c-40019726baca@omprussia.ru
Fixes: df2d8213d9e3 ("hisi_sas: use platform_get_irq()")
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver overrides the error codes returned by platform_get_irq() to
-ENODEV, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Propagate the error code
upstream as it should have been done from the start...
Link: https://lore.kernel.org/r/420364ca-614a-45e3-4e35-0e0653c7bc53@omprussia.ru
Fixes: 2953f850c3b8 ("[SCSI] ufs: use devres functions for ufshcd")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use DEFINE_SHOW_ATTRIBUTE() macro to simplify the code.
Link: https://lore.kernel.org/r/20210331065326.18804-1-dingsenjie@163.com
Signed-off-by: dingsenjie <dingsenjie@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a error message within devm_ioremap_resource() already, so remove
the dev_err() call to avoid redundant error message.
Link: https://lore.kernel.org/r/20210409075522.2111083-1-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add (pseudo) SAS address for ATA software reset failure log to assist in
debugging.
Link: https://lore.kernel.org/r/1617709711-195853-7-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If a channel interrupt occurs without any status bit set, the handler will
return directly. However, if such redundant interrupts are received, it's
better to check what happen, so add logs for this.
Link: https://lore.kernel.org/r/1617709711-195853-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Yihang Li <liyihang6@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The debugfs snapshot should be executed before the reset occurs to ensure
that the register contents are saved properly.
As such, it is incorrect to queue the debugfs dump when running a reset as
the reset will occur prior to the snapshot work item is handler.
Therefore, directly snapshot registers in the reset work handler.
Link: https://lore.kernel.org/r/1617709711-195853-5-git-send-email-john.garry@huawei.com
Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Function sas_unregister_ha() needs to be called to roll back if
hisi_hba->hw->hw_init() fails in function hisi_sas_probe() or
hisi_sas_v3_probe(). Make that change.
Link: https://lore.kernel.org/r/1617709711-195853-4-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To help debugging efforts, print the device SAS address for v3 hw erroneous
completion log.
Here is an example print:
hisi_sas_v3_hw 0000:b4:02.0: erroneous completion iptt=2193 task=000000002b0c13f8 dev id=17 addr=570fd45f9d17b001
Link: https://lore.kernel.org/r/1617709711-195853-3-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The debugfs code has been relocated to v3 hw driver, so delete unused
struct hisi_sas_hw function pointers snapshot_{prepare, restore}.
Link: https://lore.kernel.org/r/1617709711-195853-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
checkpatch reports the following:
ERROR: that open brace { should be on the previous line
+static struct error_fw flash_error_table[] =
+{
Fix a couple of instances of misplaced open bracket.
Link: https://lore.kernel.org/r/1617886593-36421-3-git-send-email-luojiaxing@huawei.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
checkpatch reports the following:
ERROR: space prohibited before that ',' (ctx:WxW)
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb);
Remove unnecessary whitespace.
Link: https://lore.kernel.org/r/1617886593-36421-2-git-send-email-luojiaxing@huawei.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The for-loop iterates with a u8 loop counter i and compares this with the
loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a
potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop
counter. Fix this by making the loop counter the same type as
pm8001_ha->max_q_num.
[mkp: this is purely theoretical, max_q_num is currently limited to 64]
Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com
Fixes: 65df7d1986a1 ("scsi: pm80xx: Fix chip initialization failure")
Addresses-Coverity: ("Infinite loop")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
mpi_uninit_check() is not being called in an atomic context. The only
caller of mpi_uninit_check() is pm80xx_chip_soft_rst().
Callers of pm80xx_chip_soft_rst():
- pm8001_ioctl_soft_reset()
- pm8001_pci_probe()
- pm8001_pci_remove()
- pm8001_pci_suspend()
- pm8001_pci_resume()
There was a similar fix for mpi_init_check() in commit
d71023af4bec ("scsi: pm80xx: Do not busy wait in MPI init check")
Link: https://lore.kernel.org/r/20210406180534.1924345-3-ipylypiv@google.com
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The mpi_uninit_check() takes longer for inbound doorbell register to be
cleared. Increase the timeout substantially so that the driver does not
fail to load.
Previously, the inbound doorbell wait time was mistakenly increased in the
mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the
mpi_init_check() wait time as-is as these are timeout values and if there
is a failure, waiting longer is not an issue.
Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@google.com
Fixes: e90e236250e9 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check")
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Resolve a couple of conflicts between the 5.12 fixes branch and the
5.13 staging tree (iSCSI target and UFS).
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes, all in drivers.
The hpsa three are the most extensive and the most problematic: it's a
packed structure misalignment that oopses on ia64 but looks like it
would also oops on quite a few non-x86 architectures.
The pm80xx is a regression and the rest are bug fixes for patches in
the misc tree"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state
scsi: target: iscsi: Fix zero tag inside a trace event
scsi: pm80xx: Fix chip initialization failure
scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs
scsi: ufs: core: Fix task management request completion timeout
scsi: hpsa: Add an assert to prevent __packed reintroduction
scsi: hpsa: Fix boot on ia64 (atomic_t alignment)
scsi: hpsa: Use __packed on individual structs, not header-wide
|
|
When the cache_type for the SCSI device is changed, the SCSI layer issues a
MODE_SELECT command. The caching mode details are communicated via a
request buffer associated with the SCSI command with data direction set as
DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata
layer, as a part of generic initial setup, libata layer sets up the
scatterlist for the command using the SCSI command (ata_scsi_qc_new()).
This command is then translated by the libata layer into
ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats
this as a non-data command (ata_mselect_caching()), since it only needs an
ATA taskfile to pass the caching on/off information to the device. It does
not need the scatterlist that has been setup, so it does not perform
dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this
command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it
as a non-data command with a scatterlist. It cannot extract the correct DMA
length since the scatterlist has not been mapped with dma_map_sg() for a
DMA operation. When this partially constructed SAS task reaches pm80xx
LLDD, it results in the following warning:
"pm80xx_chip_sata_req 6058: The sg list address
start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff
end_addr_low=0xffffffff has crossed 4G boundary"
Update libsas to handle ATA non-data commands separately so num_scatter and
total_xfer_len remain 0.
Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com
Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA")
Tested-by: Luo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jolly Shah <jollys@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and
sync thread") I missed that libiscsi was now setting the iSCSI class state,
and that patch ended up resetting the state during conn stoppage and using
the wrong state value during ep_disconnect. This patch moves the setting of
the class state to the class module and then fixes the two issues above.
Link: https://lore.kernel.org/r/20210406171746.5016-1-michael.christie@oracle.com
Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread")
Cc: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the unchecked_isa_dma now that all users are gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is the last piece in the kernel requiring the block layer ISA
bounce buffering, and it does not actually look used. So remove it
to see if anyone screams, in which case we'll need to find a solution
to fix it back up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Warn on and don't support adapters that have a DMA bug that forces ISA-style
bounce buffering.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ISA support in Buslogic has been broken for a long time, as all
the I/O path expects a struct device for DMA mapping that is derived from
the PCI device, which would simply crash for ISA adapters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Link: https://lore.kernel.org/r/20210331073001.46776-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To remove the last user of the unchecked_isa_dma flag and thus the block
layer ISA bounce buffering switch this driver to use its own local bounce
buffer. This has the effect of not needing the chain indirection and
supporting and unlimited number of segments. It does however limit the
transfer size for each command to something that can be reasonable
allocated by dma_alloc_coherent like 8K.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
checkpatch reported several whitespace errors. Fix them all.
Link: https://lore.kernel.org/r/1616675396-6108-3-git-send-email-luojiaxing@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
checkpatch reported an error in sas_to_ata_err(). switch and case
statements are incorrectly indented.
Link: https://lore.kernel.org/r/1616675396-6108-2-git-send-email-luojiaxing@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove unnecessary include of linux/version.h.
Link: https://lore.kernel.org/r/1617283618-19346-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct bfa_fcs_s is declared twice. First is declared at line 50, remove
the duplicate.
struct bfa_fcs_fabric_s is defined at line 175, remove unnecessary
declaration.
Link: https://lore.kernel.org/r/20210401063535.992487-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the following out-of-bounds warnings by enclosing some structure
members into new structure objects upiu_req and upiu_rsp:
include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds]
include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds]
arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds]
arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds]
Refactor the code by making it more structured.
The problem is that the original code is trying to copy data into a bunch
of struct members adjacent to each other in a single call to memcpy(). Now
that a new struct _upiu_req_ enclosing all those adjacent members is
introduced, memcpy() doesn't overrun the length of &treq.req_header,
because the address of the new struct object _upiu_req_ is used as the
destination, instead. The same problem is present when memcpy() overruns
the length of the source &treq.rsp_header; in this case the address of the
new struct object _upiu_rsp_ is used, instead.
Also, this helps with the ongoing efforts to enable -Warray-bounds and
avoid confusing the compiler.
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/60640558.lsAxiK6otPwTo9rv%25lkp@intel.com/
Link: https://lore.kernel.org/r/20210331224338.GA347171@embeddedor
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Build-tested-by: kernel test robot <lkp@intel.com>
|
|
The spinlock and list head of fnic_list are initialized statically. It is
unnecessary to initialize them.
Link: https://lore.kernel.org/r/20210330125911.1050879-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While diag reset is in progress there is short duration where all access to
controller's PCI config space from the host needs to be blocked. This is
due to a hardware limitation of the IOC controllers.
Block all access to controller's config space from userland applications by
calling pci_cfg_access_lock() while diag reset is in progress and unlocking
it again after the controller comes back to ready state.
Link: https://lore.kernel.org/r/20210330105137.20728-1-sreekanth.reddy@broadcom.com
Cc: stable@vger.kernel.org #v5.4.108+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Covert ActiveCablePowerRequirement's value to target CPU endian before
displaying it.
Link: https://lore.kernel.org/r/20210330105106.20569-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Whenever the driver is adding a vSES to virtual-phys list it is
reinitializing the list head. Hence those vSES devices which were added
previously are lost.
Stop reinitializing the list every time a new vSES device is added.
Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.com
Cc: stable@vger.kernel.org #v5.11.10+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some arrays return ILLEGAL_REQUEST with ASC 00h if they don't support the
RTPG extended header so remove the check for INVALID FIELD IN CDB.
Link: https://lore.kernel.org/r/20210331201154.20348-1-emilne@redhat.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Due to the frequency that alua_rtpg() is called, the path group info print
within can print the same info multiple times in the logs, subsequent
prints adding no new information or value.
To reproduce:
# modprobe scsi_debug vpd_use_hostno=0
# systemctl start multipathd.service
To fix, check stored values, only printing at alua attach/activate and if
any of the values change.
Link: https://lore.kernel.org/r/20210331181656.5046-1-jpittman@redhat.com
Reviewed-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the
SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with
srp_reconnect_work(), a warning is printed:
Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18.
Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------
Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22
Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace:
Mar 27 18:48:07 ictm1604s01h4 kernel: ? scsi_target_unblock+0x50/0x50 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel: starget_for_each_device+0x80/0xb0 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel: target_block+0x24/0x30 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel: device_for_each_child+0x57/0x90
Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp]
Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_work+0x40/0xc0 [scsi_transport_srp]
Avoid this by not trying to block targets for rports in SRP_PORT_LOST
state.
Link: https://lore.kernel.org/r/20210401091105.8046-1-mwilck@suse.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Inbound and outbound queues were not properly configured and that lead to
MPI configuration failure.
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.com
Reported-and-tested-by: Ash Izat <ash@ai0.uk>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update version.
Link: https://lore.kernel.org/r/161549387469.25025.12859568843576080076.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for newer hardware.
Link: https://lore.kernel.org/r/161549386882.25025.2594251735886014958.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Acked-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct system hangs when resuming from hibernation after first successful
hibernation/resume cycle. Rare condition involving OFA.
Note: Suspend/resume is not supported on many platforms. It was originally
intended for workstations.
Link: https://lore.kernel.org/r/161549386295.25025.14555840632114761610.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update enclosure identifier field corresponding to physical devices in
lsscsi/sysfs.
During device add the SCSI devtype is filled in during slave_configure().
However, when pqi_scsi_update_device() runs (REGNEWD) the firmware returns
zero for the SCSI devtype field, and valid devtype is overwritten by
zero. Due to this, lsscsi output shows wrong values.
Link: https://lore.kernel.org/r/161549385708.25025.17234953506918043750.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
LUN resets can take longer to complete. Adding in more driver logging helps
show where the driver is in the reset process.
Add a timeout in pqi_device_wait_for_pending_io() to cap how long the
driver will wait for outstanding commands.
Link: https://lore.kernel.org/r/161549385119.25025.10366493975709358647.stgit@brunhilda
Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Export valid sas initiator_port_protocols and target_port_protocols to
sysfs. Needed for lsscsi to show correct values.
Link: https://lore.kernel.org/r/161549384532.25025.1469409935400845385.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Display topology using PHY numbers. PHY (both local and remote) numbers
corresponding to physical drives are read from
BMIC_IDENTIFY_PHYSICAL_DEVICE.
Link: https://lore.kernel.org/r/161549383947.25025.16977895345376485056.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|