summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18Merge branch 'for-linus' of ↵Linus Torvalds10-33/+66
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Assorted bug fixes, the mlock2 system call gets added, and one improvement. The boot from dasd devices is now possible from a wider range of devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: remove SALIPL loader s390: wire up mlock2 system call s390: remove g5 elf platform support s390: avoid cache aliasing under z/VM and KVM s390/sclp: _sclp_wait_int(): retain full PSW mask s390/zcrypt: Fix initialisation when zcrypt is built-in s390/zcrypt: Fix kernel crash on systems without AP bus support s390: add support for ipl devices in subchannel sets > 0 s390/ipl: fix out of bounds access in scpdata_write s390/pci_dma: improve debugging of errors during dma map s390/pci_dma: handle dma table failures s390/pci_dma: unify label of invalid translation table entries s390/syscalls: remove system call number calculation s390/cio: simplify css_generate_pgid s390/diag: add a s390 prefix to the diagnose trace point s390/head: fix error message on unsupported hardware
2015-11-11s390/zcrypt: Fix initialisation when zcrypt is built-inSascha Silbe5-8/+14
ap_bus and zcrypt_api assumed module information to always be present and initialisation to be done in module loading order (symbol dependencies). These assumptions don't hold if zcrypt is built-in; THIS_MODULE will be NULL in this case and init call order is linker order, i.e. Makefile order. Fix initialisation order by ordering the object files in the Makefile according to their dependencies, like the module loader would do. Fix message type registration by using a dedicated "name" field rather than piggy-backing on the module ("owner") information. There's no change to the requirement that module name and msgtype name are identical. The existing name macros are used. We don't need any special code for dealing with the drivers being built-in; the generic module support code already does the right thing. Test results: 1. CONFIG_MODULES=y, CONFIG_ZCRYPT=y KVM: boots, no /sys/bus/ap (expected) LPAR with CEX5: boots, /sys/bus/ap/devices/card*/type present 2. CONFIG_MODULES=y, CONFIG_ZCRYPT=m=: KVM: boots, loading zcrypt_cex4 (and ap) fails (expected) LPAR with CEX5: boots, loading =zcrypt_cex4= succeeds, /sys/bus/ap/devices/card*/type present after explicit module loading 3. CONFIG_MODULES unset, CONFIG_ZCRYPT=y: KVM: boots, no /sys/bus/ap (expected) LPAR with CEX5: boots, /sys/bus/ap/devices/card*/type present No further testing (user-space functionality) was done. Fixes: 3b6245fd303f ("s390/zcrypt: Separate msgtype implementation from card modules.") Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-11s390/zcrypt: Fix kernel crash on systems without AP bus supportSascha Silbe1-0/+6
On systems without AP bus (e.g. KVM) the kernel crashes during init calls when zcrypt is built-in: kernel BUG at drivers/base/driver.c:153! illegal operation: 0001 ilc:1 [#1] SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.2.0+ #221 task: 0000000010a40000 ti: 0000000010a48000 task.ti:0000000010a48000 Krnl PSW : 0704c00180000000 0000000000592bd6(driver_register+0x106/0x140) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 0000000000000012 0000000000000000 0000000000c45328 0000000000c44e30 00000000009ef63c 000000000067f598 0000000000cf3c58 0000000000000000 000000000000007b 0000000000cb1030 0000000000000002 0000000000000000 0000000000ca8580 0000000010306700 00000000001001d8 0000000010a4bd88 Krnl Code: 0000000000592bc6: f0b00004ebcf srp 4(12,%r0),3023(%r14),0 0000000000592bcc: f0a0000407f4 srp 4(11,%r0),2036,0 #0000000000592bd2: a7f40001 brc 15,592bd4 >0000000000592bd6: e330d0000004 lg %r3,0(%r13) 0000000000592bdc: c0200021edfd larl %r2,9d07d6 0000000000592be2: c0e500126d8f brasl %r14,7e0700 0000000000592be8: e330d0080004 lg %r3,8(%r13) 0000000000592bee: a7f4ffab brc 15,592b44 Call Trace: ([<00000000001001c8>] do_one_initcall+0x90/0x1d0) [<0000000000c6dd34>] kernel_init_freeable+0x1e4/0x2a0 [<00000000007db53a>] kernel_init+0x2a/0x120 [<00000000007e8ece>] kernel_thread_starter+0x6/0xc [<00000000007e8ec8>] kernel_thread_starter+0x0/0xc Last Breaking-Event-Address: [<0000000000592bd2>] driver_register+0x102/0x140 When zcrypt is built as a module, the module loader ensures that the driver modules cannot be loaded if the AP bus module returns an error during initialisation. But if zcrypt and the driver are built-in, the driver is getting initialised even if the AP bus initialisation failed. The driver invokes ap_driver_register() during initialisation, which then causes operations on uninitialised data structures to be performed. Explicitly protect ap_driver_register() by introducing an "initialised" flag that gets set iff the AP bus initialisation was successful. When the AP bus initialisation failed, ap_driver_register() will error out with -ENODEV, causing the driver initialisation to fail as well. Test results: 1. Inside KVM (no AP bus), zcrypt built-in Boots. /sys/bus/ap not present (expected). 2. Inside KVM (no AP bus), zcrypt as module Boots. Loading zcrypt_cex4 fails because loading ap_bus fails (expected). 3. On LPAR with CEX5, zcrypt built-in Boots. /sys/bus/ap/devices/card* present but .../card*/type missing (i.e. zcrypt_device_register() fails, unrelated issue). 4. On LPAR with CEX5, zcrypt as module Boots. Loading zcrypt_cex4 successful, /sys/bus/ap/devices/card*/type present. No further testing (user-space functionality) was done. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-11s390: add support for ipl devices in subchannel sets > 0Sebastian Ott3-20/+46
Allow to ipl from CCW based devices residing in any subchannel set. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-09s390/cio: simplify css_generate_pgidSebastian Ott1-5/+0
Simplify the css_generate_pgid code by using stap() independent of CONFIG_SMP. For !CONFIG_SMP builds stap() will deliver the address of the cpu we IPL'ed from (which can be != 0). Note: the ifdef was likely added to be compatible with _very_ old machines which we don't support anyway. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-07block: change ->make_request_fn() and users to return a queue cookieJens Axboe2-5/+8
No functional changes in this patch, but it prepares us for returning a more useful cookie related to the IO that was queued up. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-04Merge branch 'for-linus' of ↵Linus Torvalds28-2799/+1249
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "There is only one new feature in this pull for the 4.4 merge window, most of it is small enhancements, cleanup and bug fixes: - Add the s390 backend for the software dirty bit tracking. This adds two new pgtable functions pte_clear_soft_dirty and pmd_clear_soft_dirty which is why there is a hit to arch/x86/include/asm/pgtable.h in this pull request. - A series of cleanup patches for the AP bus, this includes the removal of the support for two outdated crypto cards (PCICC and PCICA). - The irq handling / signaling on buffer full in the runtime instrumentation code is dropped. - Some micro optimizations: remove unnecessary memory barriers for a couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for spin_unlock. Use the builtin bswap if available and make test_and_set_bit_lock more cache friendly. - Statistics and a tracepoint for the diagnose calls to the hypervisor. - The CPU measurement facility support to sample KVM guests is improved. - The vector instructions are now always enabled for user space processes if the hardware has the vector facility. This simplifies the FPU handling code. The fpu-internal.h header is split into fpu internals, api and types just like x86. - Cleanup and improvements for the common I/O layer. - Rework udelay to solve a problem with kprobe. udelay has busy loop semantics but still uses an idle processor state for the wait" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits) s390: remove runtime instrumentation interrupts s390/cio: de-duplicate subchannel validation s390/css: unneeded initialization in for_each_subchannel s390/Kconfig: use builtin bswap s390/dasd: fix disconnected device with valid path mask s390/dasd: fix invalid PAV assignment after suspend/resume s390/dasd: fix double free in dasd_eckd_read_conf s390/kernel: fix ptrace peek/poke for floating point registers s390/cio: move ccw_device_stlck functions s390/cio: move ccw_device_call_handler s390/topology: reduce per_cpu() invocations s390/nmi: reduce size of percpu variable s390/nmi: fix terminology s390/nmi: remove casts s390/nmi: remove pointless error strings s390: don't store registers on disabled wait anymore s390: get rid of __set_psw_mask() s390/fpu: split fpu-internal.h into fpu internals, api, and type headers s390/dasd: fix list_del corruption after lcu changes s390/spinlock: remove unneeded serializations at unlock ...
2015-11-03s390/cio: de-duplicate subchannel validationPierre Morel1-23/+4
cio_validate_io_subchannel() and cio_validate_msg_subchannel() are identical, as the called functions already take care about the differences between subchannel types. Just inline the code into the only user, cio_validate_subchannel(), instead. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/css: unneeded initialization in for_each_subchannelPierre Morel1-1/+0
The ret variable is always set by the fn function. There is no need to initialize it. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/dasd: fix disconnected device with valid path maskStefan Haberland1-1/+6
Path verification is either done via dasd_eckd_read_conf() which is triggered during online processing and resume or via do_path_verification_work() which is triggered after path events. The dasd_eckd_read_conf() version added paths unconditionally and did not check if the path mask was empty. This led to devices having the disconnected stop flag set but a valid path mask. So they where not working although they had paths validated successfully. After a resume this state could even not be solved with additional paths added. Fix by checking for an empty path mask in dasd_eckd_read_conf() and clearing the device stop bits for a newly added channel path. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/dasd: fix invalid PAV assignment after suspend/resumeStefan Haberland1-4/+16
For a valid PAV assignment the DASD driver needs to notice possibly changed configuration data. Thus the failing of read configuration data should also fail the device restore to prevent invalid PAV assignment. The failed device may get restored after additional paths get available later on. If the restore fails after the device was added to the lcu alias handling it needs to be removed from the alias handling before exiting the restore function. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/dasd: fix double free in dasd_eckd_read_confStefan Haberland1-12/+25
The configuration data is stored per path and also the first valid configuration data per device. When dasd_eckd_read_conf is called again after a path got lost the device configuration data is cleared but possibly not the per path configuration data. This might lead to a double free when the lost path gets operational again. Fix by clearing all per path configuration data when the first valid configuration data is received and stored. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-27s390/cio: move ccw_device_stlck functionsSebastian Ott3-70/+60
device_ops.c should only contain functions that are called by ccw device drivers. Move the cio internal functions that handle unconditional reserve + release to device_pgid.c Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-27s390/cio: move ccw_device_call_handlerSebastian Ott3-48/+38
device_ops.c should only contain functions that are called by ccw device drivers. Move the cio internal function ccw_device_call_handler to device_fsm.c where it's used. Remove some useless comments while at it. Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-27s390/nmi: remove castsHeiko Carstens1-3/+3
Remove all the casts to and from the machine check interruption code. This patch changes struct mci to a union, which contains an anonymous structure with the already known bits and in addition an unsigned long field, which contains the raw machine check interruption code. This allows to simply assign and decoce the interruption code value without the need for all those casts we had all the time. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-15s390/dasd: fix list_del corruption after lcu changesStefan Haberland1-1/+4
A summary unit check occurs when the lcu updates the PAV configuration e.g. base PAV assignment or PAV mode at all. This requires the reset of the drivers internal pavgroups. Therefore the alias devices are flushed and moved via a temporary list to the active_devices list where they are not associated with a pavgroup. In conjunction with updates to the base device the pavgroup may be removed since both base_list and alias_list are empty. Unfortunately during alias flush and move to the active_device list from alias_list the pavgroup pointer is not deleted in the device private structure. This leads to a list del_corruption if another lcu_update tries to move the device in the non existent pavgroup. Fix by removing the pavgroup pointer after the alias device was moved to the active_devices list. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: use system work queue for ap_scan_busMartin Schwidefsky1-18/+8
There is a system work queue system_long_wq for long running work. Use this work queue for the AP bus scan loop. Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: remove support for PCICC and PCICA cardsMartin Schwidefsky6-1445/+2
Remove the code for really old crypt cards, PCICC and PCICA. These cards have been out of service for several years. Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: introduce state machine for the AP busMartin Schwidefsky2-562/+520
Replace the two fields 'unregistered' and 'reset' with a device state with 5 possible values. Introduce two events for the AP devices, device poll and device timeout. With the state machine it is easier to deal with device initialization and suspend/resume. Device polling is simpler as well, the arkane 'flags' passing is gone. Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: use explicit return code for flushed requestsMartin Schwidefsky6-66/+88
If a AP device is removed while messages are still pending, the requests are cancelled by calling the message receive function with an error pointer for the reply. The message type receive handler recognize this and create a fake hardware error TYPE82_RSP_CODE / REP82_ERROR_MACHINE_FAILURE. The message with the hardware error then causes a printk and a return code of -EAGAIN. Replace the intricate scheme with an explicit return code for this sitation and avoid the error message. Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: cleanup AP bus timer codeMartin Schwidefsky1-18/+6
Set the configuration timer at the end of the ap_scan_bus function. Make use of setup_timer and remove some unnecessary add_timer, mod_timer and del_timer_sync calls. Replace the complicated timer_pending, mod_timer and add_timer code in ap_config_time_store with a simple mod_timer. Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: fix suspend/resume of AP bus devicesMartin Schwidefsky1-166/+160
If there are no devices on the AP bus there will not be a single call to the per-device ap_bus_suspend function. Even worse, there will not be a call to the per-device ap_bus_resume either and the AP will fail so resume correctly. Introduce a bus specific dev_pm_ops to suspend / resume the AP bus related things. While we are at it, simplify the power management code of the AP bus. Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: fix device unregister raceMartin Schwidefsky1-2/+0
The ap_queue_messsage function will call device_unregister if the unregistered field of the device has been set while trying to queue a message. This races with other device_unregister calls, e.g. from the ap_scan_bus. Remove the call to device_unregister from ap_queue_message and let ap_scan_bus deal with it. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: fix memory leak with ap configuration dataMartin Schwidefsky2-133/+117
The ap_query_configuration function allocates the ap_config_info structure, but there is no code to free the structure. Allocate the structure in the module_init function and free it again in module_exit. While we are at it simplify a few functions in regard to the ap configuration data. Reviewed-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: remove duplicate low level functionsMartin Schwidefsky2-117/+32
ap_test_queue, ap_query_facilities, __ap_query_functions all use the same PQAP(TAPQ) command. Consolidate the three into a single ap_test_queue function that returns the AP status and the 64-bit result. The exception table entry for PQAP(TAPQ) can be avoided if the T bit for the APFT facility is set only if test_facility(15) indicated that the facility is present. Integrate ap_query_function into ap_query queue to avoid calling PQAP(TAPQ) twice. Reviewed-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/sclp: avoid merged message outputMartin Schwidefsky3-83/+78
The sclp console and tty code currently uses several message text objects in a single message event to print several lines with one SCCB. This causes the output of these lines to be fused into a block which is noticeable when selecting text in the operating system message panel. Instead use several message events with a single message text object each to print every line on its own. This changes the SCCB layout from struct sccb_header struct evbuf_header struct mdb_header struct go struct mto ... struct mto to struct sccb_header struct evbuf_header struct mdb_header struct go struct mto ... struct evbuf_header struct mdb_header struct go struct mto Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/diag: add a statistic for diagnose callsMartin Schwidefsky3-3/+16
Introduce /sys/debug/kernel/diag_stat with a statistic how many diagnose calls have been done by each CPU in the system. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: introduce pathmask_to_posSebastian Ott2-9/+6
We often need to correlate an 8 bit path mask with the position in a channel path array. Introduce and use pathmask_to_pos for that task. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: reactivate cmf after hibernateSebastian Ott3-0/+15
During resume from hibernate we already reenable measurement block updates on a per device basis. In addition to that we also need to activate channel measurement globally using the set channel monitor instruction. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: use kmem_cache for extended measurement block allocationSebastian Ott1-38/+26
Extended measurement blocks need to be 64 byte aligned. To achieve that 128 bytes for each measurement block are allocated and an align callback returns a 64 byte aligned address inside this area. Replace this code with kmem_cache allocations. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: fix memleak in channel measurementSebastian Ott1-1/+3
The measurement block for the extended measurement data is not freed when switching off per device measurement. Free the measurement block after HW stopped accessing it. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: improve locking during cmbe allocationSebastian Ott1-20/+23
During allocation of extended measurement blocks we check if the device is already active for channel measurement and add the device to a list of devices with active channel measurement. The check is done under ccwlock protection and the list modification is guarded by a different lock. To guarantee that both states are in sync make sure that both locks are held during the allocation process (like it's already done for the "normal" measurement block allocation). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: fix use after free in cmb processingSebastian Ott2-11/+18
Devices with active channel measurement are included in a list. When a device is removed without deactivating channel measurement first the list_head is freed but still used. Fix this by making sure that channel measurement is deactivated during device deregistration. For devices that we deregister because they are no longer accessible deactivating channel measurement will fail. In this case we can report success because the FW will no longer access the measurement block. In addition to these steps keep an extra device reference while channel measurement is active. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: use device_lock during cmb activationSebastian Ott2-13/+38
Hold the device_lock during [de]activation of the channel measurement block to synchronize concurrent usage of these functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: cleanup cmb_enable sysfs attrSebastian Ott1-8/+14
Ensure that we hold the ccwlock when accessing private data. Return errors that occur during measurement enabling to userspace. Apply some cleanups while at it. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/dasd: mark DASD devices as non rotationalChristian Borntraeger1-0/+1
We were able to reduce the CPU overhead of big paging scenarios when announcing our paging disks as non-rotational. Almost all dasd devices are implemented in storage servers with cache, raid, striping and lots of magic. There is no point in optimizing the disk schedulers and swap code for a single platter moving arm rotational disks. Given the complexity of the setup and the fact that this change is mostly to disable the additional overhead in swap code, lets keep the other functionality unchanged and do not disable the this device as entropy source - unlike other non-rotational devices. Suggested-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/zcrypt: enable odd RSA modulus sizes in CRT formatIngo Tuchscherer4-5/+4
In the past only even modulus sizes were allowed for RSA keys in CRT format. This restriction was based on limited RSA key generation on older crypto adapters that provides only even modulus sizes. This restriction is not valid any more. Revoke restrictions that crypto requests can be serviced with odd RSA modulus length in CRT format. Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-07s390/qdio: fix WARN_ON_ONCE conditionEugene Crosser1-2/+2
If HiperSockets Completion Queueing is enabled, qdio always issues a warning, since the condition is always met. This patch fixes the condition in WARN_ON_ONCE that was always true. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07s390/qeth: optimize MAC handling in rx_mode callbackLakhvich Dmitriy2-45/+111
In layer2 mode of the qeth driver, MAC address lists from struct net_device require mapping to the OSA-card. The existing implementation is inefficient for lists with more than several MAC addresses, since for every ndo_set_rx_mode callback it removes all MAC addresses first, and then registers the current MAC address list. This patch changes implementation of ndo_set_rx_mode callback in qeth, only performing hardware registration/removal for new/deleted addresses. To shorten lookup of MAC addresses registered addresses are kept in a hashtable instead of a linear list. Signed-off-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07s390/qeth: switch to napi_gro_receiveThomas Richter1-1/+1
Add support for GRO (generic receive offload) in the layer 2 part of device driver qeth. This results in a performance improvement when GRO and RX is turned on. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+9
Conflicts: net/ipv4/arp.c The net/ipv4/arp.c conflict was one commit adding a new local variable while another commit was deleting one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21s390/iucv: do not use arrays as argumentUrsula Braun4-20/+18
The iucv code uses arrays as arguments. Even though this does not really cause a problem, it could be misleading, since the compiler turns array arguments into just a pointer argument. To be more precise this patch changes the array arguments into pointers. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21qeth: add layer 2 RX/TX checksum offloadingThomas Richter4-147/+285
Checksum offloading for send and receive is already supported for layer 3 (IP layer). This patch adds support for RX and TX hardware checksum offloading for layer 2 (MAC layer). The hardware calculates the checksum for IP UDP and TCP packets. This patch moves the hardware checksum offloading setup to the set of common functions in qeth_core_main.c. Layer 2 and layer 3 now simply call the same common functions. Also note that TX checksum offloading is always enabled. The device driver relies on the TCP/IP stack to make use of this feature. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21qeth: move OSA portname into deprecated statusUrsula Braun3-97/+11
An OSA-Express port name was required to identify a shared OSA port. All operating system instances that shared the port had to use the same port name. This requirement no longer applies. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21qeth: no write permission for readonly sysattrLakhvich Dmitriy1-1/+1
User is not allowed to write into bridge_state sysfs file. Fixed attribute not mislead the user Signed-off-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21qeth: remove extraneous length from %pM formatEugene Crosser1-2/+2
Length specifier in the %pM format is not supported (at least, not documented). Remove it, and also an extraneous '&' for the array. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+9
Pull virtio fixes and cleanups from Michael Tsirkin: "This fixes the virtio-test tool, and improves the error handling for virtio-ccw" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: handle failures of READ_VQ_CONF ccw tools/virtio: propagate V=X to kernel build vhost: move features to core tools/virtio: fix build after 4.2 changes
2015-09-16virtio/s390: handle failures of READ_VQ_CONF ccwPierre Morel1-1/+9
In virtio_ccw_read_vq_conf() the return value of ccw_io_helper() was not checked. If the configuration could not be read properly, we'd wrongly assume a queue size of 0. Let's propagate any I/O error to virtio_ccw_setup_vq() so it may properly fail. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10drivers/s390/crypto/zcrypt_api.c: use seq_hex_dump() to dump buffersAndy Shevchenko1-9/+1
Instead of custom approach let's use recently introduced seq_hex_dump() helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Cc: Tadeusz Struk <tadeusz.struk@intel.com> Cc: Helge Deller <deller@gmx.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 06:19:59 +0000