summaryrefslogtreecommitdiff
path: root/drivers/remoteproc/qcom_wcnss.c
AgeCommit message (Collapse)AuthorFilesLines
2024-03-05remoteproc: qcom_wcnss: Use devm_rproc_alloc() helperAndrew Davis1-11/+6
Use the device lifecycle managed allocation function. This helps prevent mistakes like freeing out of order in cleanup functions and forgetting to free on error paths. Signed-off-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20240123184632.725054-7-afd@ti.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-15remoteproc: qcom: wcnss: use devm_platform_ioremap_resource_byname()Ye Xingchen1-3/+1
Convert platform_get_resource_byname(),devm_ioremap_resource() to a single call to devm_platform_ioremap_resource_byname(), as this is exactly what this function does. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202303221116427329010@zte.com.cn Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-15remoteproc: qcom: Use of_reserved_mem_lookup()Stephan Gerhold1-13/+11
Reserved memory can be either looked up using the generic function of_address_to_resource() or using the special of_reserved_mem_lookup(). The latter has the advantage that it ensures that the referenced memory region was really reserved and is not e.g. status = "disabled". of_reserved_mem also supports allocating reserved memory dynamically at boot time. This works only when using of_reserved_mem_lookup() since there won't be a fixed address in the device tree. Switch the code to use of_reserved_mem_lookup(), similar to qcom_q6v5_wcss.c which is using it already. There is no functional difference for static reserved memory allocations. While at it this also adds two missing of_node_put() calls in qcom_q6v5_pas.c. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # SDM845 Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20230710-rproc-of-rmem-v3-1-eea7f0a33590@gerhold.net Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-15remoteproc: Explicitly include correct DT includesRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230714174935.4063513-1-robh@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-05-09remoteproc: qcom_wcnss: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20230504194453.1150368-14-u.kleine-koenig@pengutronix.de Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-04-03remoteproc: Remove unnecessary (void*) conversionsYu Zhe1-5/+5
Pointer variables of void * type do not require type cast. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Link: https://lore.kernel.org/r/20230328024907.29791-1-yuzhe@nfschina.com [Fixed merge conflict in xlnx_r5_remoteproc.c] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-02-27Merge tag 'soc-drivers-6.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...
2023-02-08firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/Elliot Berman1-1/+1
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h. This removes 1 of a few remaining Qualcomm-specific headers into a more approciate subdirectory under include/. Suggested-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
2022-12-27remoteproc: qcom: qcom_wcnss: Add support for pronto-v3Vladimir Lypak1-0/+12
Pronto-v3 is similar to pronto-v2. It requires two power domains, one regulator, and it requires the xo clock. It is used on the MSM8953 platform. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221001031345.31293-2-sireeshkodali1@gmail.com
2022-07-06remoteproc: qcom: wcnss: Fix handling of IRQsSireesh Kodali1-2/+8
The wcnss_get_irq function is expected to return a value > 0 in the event that an IRQ is succssfully obtained, but it instead returns 0. This causes the stop and ready IRQs to never actually be used despite being defined in the device-tree. This patch fixes that. Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader") Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220526141740.15834-2-sireeshkodali1@gmail.com
2022-03-11remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_regionMiaoqian Lin1-0/+1
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220308063102.10049-1-linmq006@gmail.com
2021-09-13remoteproc: qcom: wcnss: Drop unused smd includeStephen Boyd1-1/+0
This include isn't used anymore because the smd functions have been moved to the qcom_common.c file. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210823235120.1203512-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-28remoteproc: qcom: wcnss: Fix race with iris probeBjorn Andersson1-37/+12
The remoteproc driver is split between the responsibilities of getting the SoC-internal ARM core up and running and the external RF (aka "Iris") part configured. In order to satisfy the regulator framework's need of a struct device * to look up supplies this was implemented as two different drivers, using of_platform_populate() in the remoteproc part to probe the iris part. Unfortunately it's possible that the iris part probe defers on yet not available regulators and an attempt to start the remoteproc will have to be rejected, until this has been resolved. But there's no useful mechanism of knowing when this would be. Instead replace the of_platform_populate() and the iris probe with a function that rolls its own struct device, with the relevant of_node associated that is enough to acquire regulators and clocks specified in the DT node and that may propagate the EPROBE_DEFER back to the wcnss device's probe. Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reported-by: Anibal Limon <anibal.limon@linaro.org> Reported-by: Loic Poulain <loic.poulain@linaro.org> Tested-by: Anibal Limon <anibal.limon@linaro.org> Link: https://lore.kernel.org/r/20210312002251.3273013-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-23remoteproc: qcom_wcnss: Use devm_qcom_smem_state_get()Stephan Gerhold1-3/+2
Use the new managed devm_qcom_smem_state_get() variant instead of calling qcom_smem_state_put() explicitly in remove() to simplify the code a bit. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210618111556.53416-3-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: qcom: wcnss: Allow specifying firmware-nameBjorn Andersson1-1/+7
Introduce a firmware-name property, in order to be able to support device/platform specific firmware for the wireless connectivity subsystem; in line with other Qualcomm remoteproc drivers. Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210312002441.3273183-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: add is_iomem to da_to_vaPeng Fan1-1/+1
Introduce an extra parameter is_iomem to da_to_va, then the caller could take the memory as normal memory or io mapped memory. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-5-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09remoteproc: qcom_wcnss: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./drivers/remoteproc/qcom_wcnss.c:573:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1612320402-3313-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26remoteproc: qcom_wcnss: Allow replacing regulators with power domainsStephan Gerhold1-16/+93
So far we have been doing all proxy votes by voting for raw voltages/load through the regulator interface. But actually VDDCX and VDDMX represent power domains that should be preferably managed using corner votes through the power domain interface. Looking closer the code was actually never doing the proxy votes correctly: The vddcx regulator is specified as: { "vddcx", .super_turbo = true }, which is supposed to say that we should vote for the maximum corner of the VDDCX power domain. But actually "super_turbo" is unused so all we did so far is to enable the power domain. We did not vote for it to scale to the maximum performance state. Using them through the power domain interface allows voting for the maximum performance state. However, we still need to support using them through the regulator interface for old device trees. The way this is implemented here is that we check if attaching the two power domain succeeds. If yes, we skip the first "num_pd_vregs" regulators in the "vregs" list and only request the remaining ones. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200916104135.25085-9-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-01remoteproc: qcom: Update PIL relocation info on loadBjorn Andersson1-3/+11
Update the PIL relocation information in IMEM with information about where the firmware for various remoteprocs are loaded. Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-19remoteproc: use rproc_coredump_set_elf_info in driversClement Leger1-0/+1
Modify drivers which are using remoteproc coredump functionality to use rproc_coredump_set_elf_info in order to create correct elf coredump format. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20200410102433.2672-3-cleger@kalray.eu Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25remoteproc: Use size_t type for len in da_to_vaClement Leger1-1/+1
With upcoming changes in elf loader for elf64 support, section size will be a u64. When used with da_to_va, this will potentially lead to overflow if using the current "int" type for len argument. Change da_to_va prototype to use a size_t for len and fix all users of this function. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20200302093902.27849-2-cleger@kalray.eu Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-21remoteproc: qcom: Add shutdown-ack irqSibi Sankar1-0/+4
Add shutdown-ack irq handling required for sysmon shutdown for Q6V5 MSS on SDM845/MSM8996 and for WCSS Q6V5 on QCS404 SoC. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [bjorn: Revert back to qcom_add_sysmon_subdev returning a sysmon object] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-06remoteproc: qcom: fix spelling mistake "Peripherial" -> "Peripheral"Colin Ian King1-1/+1
There is a spelling mistake in the module description text, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: qcom: Introduce sysmonBjorn Andersson1-0/+4
The sysmon client communicates either via a dedicated SMD/GLINK channel or via QMI encoded messages over IPCROUTER with remote processors in order to perform graceful shutdown and inform about other remote processors shutting down. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: qcom: Register segments for core dumpSarangdhar Joshi1-0/+1
Register MDT segments with the remoteproc core dump functionality in order to include them in a core dump, in case of a recovery of the remote processor. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12soc: qcom: mdt-loader: Return relocation baseBjorn Andersson1-1/+2
In order to implement support for grabbing core dumps in remoteproc it's necessary to know the relocated base of the image, as the offsets from the virtual memory base might not be based on the physical address. Return the adjusted physical base address to the caller. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: Remove null character write of shared memJitendra Sharma1-3/+0
remoteproc is writing '\0' in the shared mem region. This region is shared among multiple clients that are also trying to read. Hence they miss first character. Remove this null character write, as this mem area is supposed to be Read only. Further during every subsystem reboot, this region is initialized with default, hence no need to write this region. Signed-off-by: Jitendra Sharma <shajit@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Drop dangling find_rsc_table dummiesBjorn Andersson1-1/+0
As the core now deals with the lack of a resource table, remove the dangling custom dummy implementations of find_rsc_table from drivers. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Merge rproc_ops and rproc_fw_opsBjorn Andersson1-7/+2
There are currently a few different schemes used for overriding fw_ops or parts of fw_ops. Merge fw_ops into rproc_ops and expose the default ELF-loader symbols so that they can be assigned by the drivers. To keep backwards compatibility with the "default" case, a driver not specifying the "load" operation is assumed to want the full ELF-loader suit of functions. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: qcom: wcnss: Make SMD handling commonBjorn Andersson1-24/+4
Move the SMD edge handling to the Qualcomm common file to make it reusable for other Qualcomm remoteproc drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: Move qcom_mdt_loader into drivers/soc/qcomBjorn Andersson1-1/+1
With the remoteproc parts cleaned out of the MDT loader we can move it to drivers/soc/qcom. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: qcom: mdt_loader: Refactor MDT loaderBjorn Andersson1-27/+2
Pushing the SCM calls into the MDT loader reduces duplication in the callers and allows for non-remoteproc clients to use the helper for parsing and loading MDT files. Cc: Andy Gross <andy.gross@linaro.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: qcom: Extract non-mdt related helperBjorn Andersson1-0/+1
In preparation for moving the mdt loader out of remoteproc let's move the somewhat unrelated resource table dummy helper to a Qualcomm "common" file. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: qcom_wcnss: Fix circular module dependencyBjorn Andersson1-2/+23
The tie between the main WCNSS driver and the IRIS driver causes a circular dependency between the two modules. Neither part makes sense to have on their own so lets merge them into one module. For the sake of picking up the clock and regulator resources described in the iris of_node we need an associated struct device. But, to keep the size of the patch down we continue to represent the IRIS part as its own platform_driver, within the same module, rather than setting up a dummy device. Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader") Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: wcnss: Bond SMD edge to remoteprocBjorn Andersson1-0/+27
Allow the wcnss smd edge to be described as a child of the wcnss remoteproc node and make the edge life cycle follow the running state of the remoteproc. This bond is necessary to clean up the smd state when the remote processor is suddenly removed, and in some cases even when it shut down in a controlled fasion. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-18remoteproc: qcom: wcnss: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/remoteproc/qcom_wcnss.ko | grep alias $ After this patch: $ modinfo drivers/remoteproc/qcom_wcnss.ko | grep alias alias: of:N*T*Cqcom,pronto-v2-pilC* alias: of:N*T*Cqcom,pronto-v2-pil alias: of:N*T*Cqcom,pronto-v1-pilC* alias: of:N*T*Cqcom,pronto-v1-pil alias: of:N*T*Cqcom,riva-pilC* alias: of:N*T*Cqcom,riva-pil Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-02remoteproc: Split driver and consumer dereferencingBjorn Andersson1-2/+2
In order to be able to lock a rproc driver implementations only when used by a client, we must differ between the dereference operation of a client and the implementation itself. This patch brings no functional change. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-22remoteproc: qcom: wcnss: Fix return value check in wcnss_probe()Wei Yongjun1-2/+2
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-18remoteproc: qcom: Introduce WCNSS peripheral image loaderBjorn Andersson1-0/+624
This introduces the peripheral image loader, for loading WCNSS firmware and boot the core on e.g. MSM8974. The firmware is verified and booted with the help of the Peripheral Authentication System (PAS) in TrustZone. Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 17:49:34 +0000