summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)AuthorFilesLines
2009-03-31regulator: twl4030 VAUX3 supports 3.0VAdrian Hunter1-1/+4
TWL4030 and TWL5030 support 3.0V on VAUX3. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
2009-03-31regulator: Support disabling of unused regulators by machinesMark Brown1-0/+92
At present it is not possible for machine constraints to disable regulators which have been left on when the system starts, for example as a result of fixed default configurations in hardware. This means that power may be wasted by these regulators if they are not in use. Provide intial support for this with a late_initcall which will disable any unused regulators if the machine has enabled this feature by calling regulator_has_full_constraints(). If this has not been called then print a warning to encourage users to fully specify their constraints so that we can change this to be the default behaviour in future. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Don't increment use_count for boot_on regulatorsMark Brown1-1/+0
Don't set use_count for regulators that are enabled at boot since this stops the supply being disabled by well-behaved consumers which do balanced enables and disabled. Any consumers which don't do disables which are not matched by enables are unable to share regulators - shared regulators are the common case so the API should facilitate them. Consumers that want to disable regulators that are enabled when they start have two options: - Do a regulator_enable() prior to the disable to bring the use count in sync with the hardware state; this will ensure that if the regulator was enabled by another driver then this consumer will play nicely with it. - Use regulator_force_disable(); this explicitly bypasses any checks done by the core and documents the inability of the driver to share the supply. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31twl4030-regulator: expose VPLL2David Brownell1-1/+1
Add VPLL2 to the set of twl4030-family regulators exposed for use by various drivers. It's commonly used to power the digital video outputs (e.g. LCD or DVI displays) on OMAP3 systems. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: refcount fixesDavid Brownell1-22/+8
Fix some refcounting issues in the regulator framework, supporting regulator_disable() for regulators that were enabled at boot time via machine constraints: - Update those regulators' usecounts after enabling, so they can cleanly be disabled at that level. - Remove the problematic per-consumer usecount, so there's only one level of enable/disable. Buggy consumers could notice different bug symptoms. The main example would be refcounting bugs; also, any (out-of-tree) users of the experimental regulator_set_optimum_mode() stuff which don't call it when they're done using a regulator. This is a net minor codeshrink. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Don't warn if we failed to get a regulatorMark Brown1-2/+0
The consumer can print a message if required, some consumers may have optional regulators and wish to downgrade the logging for them or ignore their absence. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Allow boot_on regulators to be disabled by clientsMark Brown1-9/+4
Rather than incrementing the reference count for boot_on regulators (which prevents them being disabled later on) simply force the regulator to be enabled when applying the constraints. Previously boot_on was essentially equivalent to always_on. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Implement list_voltage for WM835x LDOs and DCDCsMark Brown1-0/+29
Implement the recently added voltage step listing API for the WM835x DCDCs and LDOs. DCDCs can use values up to 0x66, LDOs can use the full range of values in the mask. Both masks are the lower bits of the register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31twl4030-regulator: list more VAUX4 voltagesDavid Brownell1-0/+2
The VAUX4 voltage table scrolls onto a second page in many versions of the TWL4030 family manuals. This doesn't mean we should ignore those values! Some boards use the (fully supported) 2.8V setting. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Don't warn on omitted voltage constraintsMark Brown1-1/+5
Specifying voltage constraints is optional (and only needed if the consumer is allowed to change the voltage) so don't complain unless a voltage has been specified. Also avoid surprises with a dangling else while we're here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Implement list_voltage() for WM8400 DCDCs and LDOsMark Brown1-4/+30
All DCDCs and LDOs are identical. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: twl4030 voltage enumeration (v2)David Brownell1-39/+23
Update previously-posted twl4030 regulator driver to export supported voltages to upper layers using a new mechanism. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: twl4030 regulatorsDavid Brownell3-0/+519
Support most of the LDO regulators in the twl4030 family chips. In the case of LDOs supporting MMC/SD, the voltage controls are used; but in most other cases, the regulator framework is only used to enable/disable a supplies, conserving power when a given voltage rail is not needed. The drivers/mfd/twl4030-core.c code already sets up the various regulators according to board-specific configuration, and knows that some chips don't provide the full set of voltage rails. The omitted regulators are intended to be under hardware control, such as during the hardware-mediated system powerup, powerdown, and suspend states. Unless/until software hooks are known to be safe, they won't be exported here. These regulators implement the new get_status() operation, but can't realistically implement get_mode(); the status output is effectively the result of a vote, with the relevant hardware inputs not exposed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: enumerate voltages (v2)David Brownell1-0/+113
Add a basic mechanism for regulators to report the discrete voltages they support: list_voltage() enumerates them using selectors numbered from 0 to an upper bound. Use those methods to force machine-level constraints into bounds. (Example: regulator supports 1.8V, 2.4V, 2.6V, 3.3V, and board constraints for that rail are 2.0V to 3.6V ... so the range of voltages is then 2.4V to 3.3V on this board.) Export those voltages to the regulator consumer interface, so for example regulator hooked up to an MMC/SD/SDIO slot can report the actual voltage options available to cards connected there. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Fix get_mode() for WM835x DCDCsMark Brown1-6/+18
The WM835x regulators need a different register checking for force mode on each DCDC. Previously the force mode status for DCDC1 was checked. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Allow regulators to set the initial operating modeMark Brown1-0/+17
This is useful when wishing to run in a fixed operating mode that isn't the default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Suggest use of datasheet supply or pin names for consumersMark Brown1-3/+6
Update the documentation to suggest the use of datasheet names for the supplies requested by regulator consumers. Doing this makes it easier to tie the design for a given platform up with the requirements of the driver for a consumer. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: add unset_regulator_supplies to fix regulator_unregisterMike Rapoport1-0/+14
Currently regulator_unregister does not clear regulator <--> consumer mapping. This patch introduces unset_regulator_supplies that clear the map. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Hoist struct regulator_dev out of core to fix notifiersMark Brown1-27/+0
Commit 872ed3fe176833f7d43748eb88010da4bbd2f983 caused regulator drivers to take the struct regulator_dev lock themselves which requires that the struct be visible to them. Band aid this by making the struct visible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Mark attributes table for virtual regulator staticMark Brown1-1/+1
It's not exported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Make fixed voltage regulators visible in KconfigMark Brown1-1/+5
This allows users to enable or disable support for these regulators at build time as they can for other regulators rather than having platforms force the regulators to be built in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Allow init_data to be passed to fixed voltage regulatorsMark Brown1-1/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Allow init data to be supplied for bq24022Mark Brown1-1/+2
Previously it was not possible to do so, making it impossible for machines to configure the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Pass regulator init data as explict argument when registeringMark Brown6-7/+10
Rather than having the regulator init data read from the platform_data member of the struct device that is registered for the regulator make the init data an explict argument passed in when registering. This allows drivers to use the platform data for their own purposes if they wish. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31Regulator: Push lock out of _notifier_call_chain + add voltage change event.Jonathan Cameron2-5/+12
Regulator: Push lock out of _notifier_call_chain and into caller functions (side effect of fixing deadlock in regulator_force_disable) + Add a voltage changed event. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: minor cleanup of virtual consumerAndrew Morton1-0/+4
On Thu, 15 Jan 2009 16:10:22 -0800 Andrew Morton <akpm@linux-foundation.org> wrote: > On Wed, 14 Jan 2009 13:16:27 -0800 > David Brownell <david-b@pacbell.net> wrote: > > > From: David Brownell <dbrownell@users.sourceforge.net> > > > > Minor cleanup to the regulator set_mode sysfs support: > > switch to sysfs_streq() in set_mode(), which is also > > a code shrink. Use the same strings that get_mode() > > uses, shrinking data too. > > > > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> > > --- > > drivers/regulator/virtual.c | 8 ++++---- > > 1 file changed, 4 insertions(+), 4 deletions(-) > > > > --- a/drivers/regulator/virtual.c > > +++ b/drivers/regulator/virtual.c > > @@ -226,13 +226,13 @@ static ssize_t set_mode(struct device *d > > unsigned int mode; > > int ret; > > > > - if (strncmp(buf, "fast", strlen("fast")) == 0) > > + if (sysfs_streq(buf, "fast\n") == 0) > > mode = REGULATOR_MODE_FAST; > > - else if (strncmp(buf, "normal", strlen("normal")) == 0) > > + else if (sysfs_streq(buf, "normal\n") == 0) > > mode = REGULATOR_MODE_NORMAL; > > - else if (strncmp(buf, "idle", strlen("idle")) == 0) > > + else if (sysfs_streq(buf, "idle\n") == 0) > > mode = REGULATOR_MODE_IDLE; > > - else if (strncmp(buf, "standby", strlen("standby")) == 0) > > + else if (sysfs_streq(buf, "standby\n") == 0) > > mode = REGULATOR_MODE_STANDBY; > > we don't need the \n's, do we? oh, it's for the string sharing. Sneaky. I wonder how many people will try to fix that up for us? Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: add get_status()David Brownell1-0/+46
Based on previous LKML discussions: * Update docs for regulator sysfs class attributes to highlight the fact that all current attributes are intended to be control inputs, including notably "state" and "opmode" which previously implied otherwise. * Define a new regulator driver get_status() method, which is the first method reporting regulator outputs instead of inputs. It can report on/off and error status; or instead of simply "on", report the actual operating mode. For the moment, this is a sysfs-only interface, not accessible to regulator clients. Such clients can use the current notification interfaces to detect errors, if the regulator reports them. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: minor cleanup of virtual consumerDavid Brownell1-4/+4
Minor cleanup to the regulator set_mode sysfs support: switch to sysfs_streq() in set_mode(), which is also a code shrink. Use the same strings that get_mode() uses, shrinking data too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-30leds: Fix bounds checking of wm8350->pmic.ledRoel Kluin1-1/+1
Fix bounds checking of wm8350->pmic.led Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-30regulator: move bq24022 init back to module_init instead of subsys_initcallPhilipp Zabel1-5/+1
This workaround was needed when regulator/ was not linked before both power/ and usb/otg/ in drivers/Makefile. Now that it is even linked before mfd/, this patch makes sure that bq24022 isn't probed before the GPIO expander is set up. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-17move wm8400-regulator's probe function to .devinit.textUwe Kleine-König1-1/+1
A pointer to wm8400_regulator_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-11regulator: PCF50633 pmic driverBalaji Rao3-0/+337
Changes from V1: - Removed support for suspend_enable & suspend_disable functions. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-09Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds1-0/+91
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: ledtrig-timer - on deactivation hardware blinking should be disabled leds: Add suspend/resume to the core class leds: Add WM8350 LED driver leds: leds-pcs9532 - Move i2c work to a workqueque leds: leds-pca9532 - fix memory leak and properly handle errors leds: Fix wrong loop direction on removal in leds-ams-delta leds: fix Cobalt Raq LED dependency leds: Fix sparse warning in leds-ams-delta leds: Fixup kdoc comment to match parameter names leds: Make header variable naming consistent leds: eds-pca9532: mark pca9532_event() static leds: ALIX.2 LEDs driver
2009-01-08regulator: catch some registration errorsDavid Brownell1-0/+14
Prevent registration of duplicate "struct regulator" names. They'd be unavailable, and clearly indicate something wrong. [Edited to remove check for NULL consumer device until we have a solution for things like cpufreq -- broonie] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: Fix some kerneldoc rendering issuesMark Brown1-7/+11
There are some minor textual changes in here as well, mostly to enable() and disable() but the primary goal of these changes is to fix misrenderings of the kerneldoc documentation for the regulator API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: Add missing kerneldocMark Brown1-0/+1
This is only the documentation that the kerneldoc system warns about. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: Clean up kerneldoc warningsMark Brown1-22/+22
Remove kerneldoc warnings that don't relate to missing documentation, mostly by renaming parameters in the documentation to match their actual names. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: Remove extraneous kerneldoc annotationsMark Brown1-2/+2
Some of the internal structures have no kerneldoc but the ** at the start of the comment marking them for documentation. Remove the annotation until some is added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: move set_machine_constraints after regulator device initializationMike Rapoport1-5/+5
Calling set_machine_constraints before regulator device initialization causes crash when constraints have apply_uV set. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: da903x: make da903x_is_enabled return 0 or 1Mike Rapoport1-1/+1
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: da903x: add '\n' to error messagesMike Rapoport1-5/+5
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: sysfs attribute reduction (v2)David Brownell1-48/+148
Clean up the sysfs interface to regulators by only exposing the attributes that can be properly displayed. For example: when a particular regulator method is needed to display the value, only create that attribute when that method exists. This cleaned-up interface is much more comprehensible. Most regulators only support a subset of the possible methods, so often more than half the attributes would be meaningless. Many "not defined" values are no longer necessary. (But handling of out-of-range values still looks a bit iffy.) Documentation is updated to reflect that few of the attributes are *always* present, and to briefly explain why a regulator may not have a given attribute. This adds object code, about a dozen bytes more than was removed by the preceding patch, but saves a bunch of per-regulator data associated with the now-removed attributes. So there's a net reduction in memory footprint. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: code shrink (v2)David Brownell1-67/+44
Shrink regulator core by removing duplication in attribute printing and probe() cleanup paths. Saves about 340 bytes (object) on ARM. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: improved mode error checksDavid Brownell1-2/+13
Minor bugfixes in handling of regulator modes: - have the routine verifying regulator modes check against the set of legal modes (!); - have regulator_set_optimum_mode() verify the return value of regulator_ops.get_optimum_mode(), like drms_uA_update(); - one call to regulator_ops.set_mode() treated zero as a failure code; make this consistent with other callers. Both regulator_set_mode() and regulator_set_optimum_mode() now require valid_ops_mask to include REGULATOR_CHANGE_MODE; that seems like a bugfix too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: enable/disable refcountingDavid Brownell1-35/+36
Make the <linux/regulator.h> framework treat enable/disable call pairs like the <linux/clk.h> and <linux/interrupt.h> frameworks do: they're refcounted, so that different parts of a driver don't need to put work into coordination that frameworks normally handle. It's a minor object code shrink. It also makes the regulator_is_disabled() kerneldoc say what it's actually returning: return value is not a refcount, and may report an error (e.g. I/O error from I2C). It also fixes some minor regulator_put() goofage: removing unlocked access to the enable state. (But still not making regulator put/get match the refcounting pattern they invoke.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-2/+2
This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Thanks, Kay From: Kay Sievers <kay.sievers@vrfy.org> Subject: regulator: struct device - replace bus_id with dev_name(), dev_set_name() Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08leds: Add WM8350 LED driverMark Brown1-0/+91
The voltage and current regulators on the WM8350 AudioPlus PMIC can be used in concert to provide a power efficient LED driver. This driver implements support for this within the standard LED class. Platform initialisation code should configure the LED hardware in the init callback provided by the WM8350 core driver. The callback should use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and wm8350_dcdc_set_slot() to configure the operating parameters of the regulators for their hardware and then then use wm8350_register_led() to instantiate the LED driver. This driver was originally written by Liam Girdwood, though it has been extensively modified since then. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-04mfd: Support configurable numbers of DCDCs and ISINKs on WM8350Mark Brown1-0/+7
Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at probe and refuse to use the absent DCDCs when running on these chips. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-09regulator: Use menuconfig in KconfigTakashi Iwai1-11/+4
Use menuconfig instead of flat configs so that you can disable/enable regulator items with one selection. Also, use depends instead of reverse selections to make life easier, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-30regulator: da903x regulator bug fixJonathan Cameron1-12/+17
Changes the device registration part of the probe function to supply the regulator device rather than its parent (the mfd device) as this caused problems when the regulator core attempted to find constraints associated with the regulators. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 11:08:32 +0000