summaryrefslogtreecommitdiff
path: root/drivers/platform
AgeCommit message (Collapse)AuthorFilesLines
2016-12-18Merge tag 'platform-drivers-x86-v4.10-2' of ↵Linus Torvalds7-1/+1120
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull more x86 platform driver updates from Darren Hart: "Move and add registration for the mlx-platform driver. Introduce button and lid drivers for the surface3 (different from the surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing ideapad-laptop quirk. Summary: ideapad-laptop: - Add Y700 15-ACZ to no_hw_rfkill DMI list surface3_button: - Introduce button support for the Surface 3 surface3-wmi: - Add custom surface3 platform device for controlling LID - Balance locking on error path mlx-platform: - Add mlxcpld-hotplug driver registration - Fix semicolon.cocci warnings - Move module from arch/x86 platform/x86: - Add Whiskey Cove PMIC TMU support" * tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: surface3-wmi: Balance locking on error path platform/x86: Add Whiskey Cove PMIC TMU support platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list platform/x86: Introduce button support for the Surface 3 platform/x86: Add custom surface3 platform device for controlling LID platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration platform/x86: mlx-platform: Fix semicolon.cocci warnings platform/x86: mlx-platform: Move module from arch/x86
2016-12-18platform/x86: surface3-wmi: Balance locking on error pathAndy Shevchenko1-5/+6
There is a possibility that lock will be left acquired. Consolidate error path under out_free_unlock label. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-18platform/x86: Add Whiskey Cove PMIC TMU supportNilesh Bacchewar3-0/+172
This adds TMU (Time Management Unit) support for Intel BXT platform. It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove PMIC. Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> [andy: resolve merge conflict in Kconfig] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-16platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI listvelemas1-0/+7
Like other Y700 models Lenovo Y700 15-ACZ does not have a physical rfkill switch. ideapad-laptop wrongly reports all radios as blocked by hardware which causes wireless network connections to fail. Add this model without an rfkill switch to the no_hw_rfkill list. Signed-off-by: Artiom Vaskov <velemas@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-16platform/x86: Introduce button support for the Surface 3Benjamin Tissoires3-0/+257
The Surface 3 is not following the ACPI spec for PNP0C40, but nearly. The device is connected to a I2C device that might have some magic but we don't know about. Just create the device after the enumeration and use the declared GPIOs to provide button support. This driver is just an adaptation of drivers/input/misc/soc_button_array.c The Surface Pro 3 is using an ACPI driver and matches against the bid of the device ("VGBI"). To prevent this incompatible driver to be used on the Surface Pro, we add a match on the Surface 3 bid "TEV2". link: https://bugzilla.kernel.org/show_bug.cgi?id=102761 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-16platform/x86: Add custom surface3 platform device for controlling LIDBenjamin Tissoires3-0/+309
The LID state provided by ACPI on the Surface 3 is not accurate. The ACPI node doesn't get notified on LID open, which means the LID input switch stays close most of the time. Fortunatelly, there is a WMI method which directly queries the GPIO underneath the LID state, so it's far more reliable than ACPI. To get the notifications that the LID was opened/closed, we can rely on the ACPI notification of the touchscreen: the DSDT shows that the touchscreen will get notified on close/open as it also controls its _STA method. Note that we need to set the tag "power-switch" to the LID input node through a udev rule for logind to accept it: SUBSYSTEM=="input", KERNEL=="event*", KERNELS=="surface3-wmi", \ TAG+="power-switch" Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-16platform/x86: mlx-platform: Add mlxcpld-hotplug driver registrationVadim Pasternak1-1/+97
Add calls for mlxcpld-hotplug platform driver registration/unregistration and add platform hotplug data configurations. This driver, when registered within system will handle system hot-plug events for the power suppliers, power cables and fans (insertion and removing). These events are controlled through CPLD Lattice device. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-16platform/x86: mlx-platform: Fix semicolon.cocci warningskbuild test robot1-1/+1
drivers/platform/x86/mlx-platform.c:219:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-16platform/x86: mlx-platform: Move module from arch/x86Vadim Pasternak3-1/+278
Since mlx-platform is not an architectural driver, it is moved out of arch/x86/platform to drivers/platform/x86. Relevant Makefile and Kconfig are updated. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-15Merge tag 'platform-drivers-x86-v4.10-1' of ↵Linus Torvalds17-73/+1239
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darrent Hart: "Introduce one new driver for Mellanox platforms. Add support for various new models to existing drivers via quirks, hotkeys, etc. Significant updates to intel_pmc_core in support of Kabylake and Sunrise Point PCH power management debug. Some cleanup and refactoring across various drivers. Detailed summary: dell-laptop: - Use brightness_set_blocking for kbd_led_level_set thinkpad_acpi: - Initialize local in_tablet_mode and type - Fix old style declaration GCC warning - Adding new hotkey ID for Lenovo thinkpad - Add support for X1 Yoga (2016) Tablet Mode - Move tablet detection into separate function asus-nb-wmi: - Add X45U quirk - Make use of dmi->ident asus-wmi: - Set specified XUSB2PR value for X550LB intel_mid_thermal: - Fix suspend handlers unused warning intel-vbtn: - Switch to use devm_input_allocate_device dell-wmi: - Add events created by Dell Rugged 2-in-1s - Adjust wifi catcher to emit KEY_WLAN intel_pmc_core: - Add KBL CPUID support - Add LTR IGNORE debug feature - Add MPHY PLL clock gating status - ModPhy core lanes pg status - Add PCH IP Power Gating Status - Fix PWRMBASE mask and mmio reg len acer-wmi: - Only supports AMW0_GUID1 on acer family mlx-platform: - Introduce support for Mellanox hotplug driver platform/x86: - Use ACPI_FAILURE at appropriate places" * tag 'platform-drivers-x86-v4.10-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (22 commits) platform/x86: thinkpad_acpi: Initialize local in_tablet_mode and type platform/x86: dell-laptop: Use brightness_set_blocking for kbd_led_level_set platform/x86: thinkpad_acpi: Fix old style declaration GCC warning platform/x86: thinkpad_acpi: Adding new hotkey ID for Lenovo thinkpad platform/x86: thinkpad_acpi: Add support for X1 Yoga (2016) Tablet Mode platform/x86: thinkpad_acpi: Move tablet detection into separate function platform/x86: asus-nb-wmi.c: Add X45U quirk platform/x86: asus-nb-wmi: Make use of dmi->ident platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB platform/x86: intel_mid_thermal: Fix suspend handlers unused warning platform/x86: intel-vbtn: Switch to use devm_input_allocate_device platform/x86: Use ACPI_FAILURE at appropriate places platform/x86: dell-wmi: Add events created by Dell Rugged 2-in-1s platform/x86: dell-wmi: Adjust wifi catcher to emit KEY_WLAN platform/x86: intel_pmc_core: Add KBL CPUID support platform/x86: intel_pmc_core: Add LTR IGNORE debug feature platform/x86: intel_pmc_core: Add MPHY PLL clock gating status platform/x86: intel_pmc_core: ModPhy core lanes pg status platform/x86: intel_pmc_core: Add PCH IP Power Gating Status platform/x86: intel_pmc_core: Fix PWRMBASE mask and mmio reg len ...
2016-12-15platform/x86: thinkpad_acpi: Initialize local in_tablet_mode and typeDarren Hart1-2/+2
linux-next reported in_tablet_mode and type may be used uninitialized after: b31800283868 ("platform/x86: thinkpad_acpi: Move tablet detection into separate function") This turns out to be a false positive as the pr_info call cannot be reached if tp_features.hotkey_tablet (global scope) is 0, and in_tablet_mode and type are assigned in both places tp_features.hotkey_tablet is assigned. Regardless, to make it explicit and avoid further reports, initialize in_tablet_mode to 0 and type to NULL. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Lyude <lyude@redhat.com>
2016-12-13Merge tag 'char-misc-4.10-rc1' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny changes over lots of "minor" driver subsystems, the largest being some new FPGA drivers. Other than that, a few other new drivers, but no new driver subsystems added for this kernel cycle, a nice change. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits) uio-hv-generic: store physical addresses instead of virtual Tools: hv: kvp: configurable external scripts path uio-hv-generic: new userspace i/o driver for VMBus vmbus: add support for dynamic device id's hv: change clockevents unbind tactics hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels() hyperv: Fix spelling of HV_UNKOWN mei: bus: enable non-blocking RX mei: fix the back to back interrupt handling mei: synchronize irq before initiating a reset. VME: Remove shutdown entry from vme_driver auxdisplay: ht16k33: select framebuffer helper modules MAINTAINERS: add git url for fpga fpga: Clarify how write_init works streaming modes fpga zynq: Fix incorrect ISR state on bootup fpga zynq: Remove priv->dev fpga zynq: Add missing \n to messages fpga: Add COMPILE_TEST to all drivers uio: pruss: add clk_disable() char/pcmcia: add some error checking in scr24x_read() ...
2016-12-13platform/x86: dell-laptop: Use brightness_set_blocking for kbd_led_level_setHans de Goede1-12/+14
kbd_led_level_set uses dell_smbios call which blocks, so the kbd_led classdev should use the brightness_set_blocking callback. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: thinkpad_acpi: Fix old style declaration GCC warningTobias Klauser1-1/+1
Fix an [-Wold-style-declaration] GCC warning by moving the inline keyword before the return type. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: thinkpad_acpi: Adding new hotkey ID for Lenovo thinkpadHui Wang1-0/+2
Recently we met an issue on lots of Lenovo thinkpad laptops (those laptops are not released to market yet), the issue is that the thinkpad_acpi.ko can't be automatically loaded as before. Through debugging, we found the HKEY_HID is LEN0268 instead of LEN0068 on those machines, and the MHKV is 0x200 instead of 0x100. So adding the new ID into the driver. Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: thinkpad_acpi: Add support for X1 Yoga (2016) Tablet ModeLyude1-4/+35
For whatever reason, the X1 Yoga doesn't support the normal method of querying for tablet mode. Instead of providing the MHKG method under the hotkey handle, we're instead given the CMMD method under the EC handle. Values on this handle are either 0x1, laptop mode, or 0x6, tablet mode. Tested-by: Daniel Martin <consume.noise@gmail.com> Signed-off-by: Lyude <lyude@redhat.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: thinkpad_acpi: Move tablet detection into separate functionLyude1-15/+37
The hotkey events and ACPI handles used for detecting tablet mode on a few of the newer thinkpad models (Yoga X1 and the Yoga 260 specifically) have been changed around, so unfortunately this means we're definitely going to need to probe for multiple types of tablet mode support. Since the hotkey_init() is already a lot larger than it should be, let's split up this detection into its own function to make things a little easier to read. As well, since we're going to have multiple types of tablet modes, make hotkey_tablet into an enum so we can also use it to indicate the type of tablet mode reporting the machine supports. Suggested by Daniel Martin <consume.noise@gmail.com> Signed-off-by: Lyude <lyude@redhat.com> Cc: Daniel Martin <consume.noise@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: asus-nb-wmi.c: Add X45U quirkMarcos Paulo de Souza1-0/+9
Without this patch, the Asus X45U wireless card can't be turned on (hard-blocked), but after a suspend/resume it just starts working. Following this bug report[1], there are other cases like this one, but this Asus is the only model that I can test. [1] https://ubuntuforums.org/showthread.php?t=2181558 Cc: stable@vger.kernel.org # 4.4.x- Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-13platform/x86: asus-nb-wmi: Make use of dmi->identMarcos Paulo de Souza1-0/+1
Make use of dmi->ident as other drivers do, like fujitsu, intel, hp and samsung. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-13platform/x86: asus-wmi: Set specified XUSB2PR value for X550LBKai-Chuan Hsieh3-0/+43
The bluetooth adapter Atheros AR3012 can't be enumerated and make the bluetooth function broken. T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3362 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb The error is: usb 2-6: device not accepting address 7, error -62 usb usb2-port6: unable to enumerate USB device It is caused by adapter's connected port is mapped to xHC controller, but the xHCI is not supported by the usb device. The output of 'sudo lspci -nnxxx -s 00:14.0': 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) 00: 86 80 31 9c 06 04 90 02 04 30 03 0c 00 00 00 00 10: 04 00 a0 f7 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1f 20 30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00 40: fd 01 36 80 89 c6 0f 80 00 00 00 00 00 00 00 00 50: 5f 2e ce 0f 00 00 00 00 00 00 00 00 00 00 00 00 60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 87 00 0c a0 e0 fe 00 00 00 00 a1 41 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0f 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 03 c0 30 00 00 00 00 00 03 0c 00 00 00 00 00 00 d0: f9 01 00 00 f9 01 00 00 0f 00 00 00 0f 00 00 00 e0: 00 08 00 00 00 00 00 00 00 00 00 00 d8 d8 00 00 f0: 00 00 00 00 00 00 00 00 b1 0f 04 08 00 00 00 00 By referencing Intel Platform Controller Hub(PCH) datasheet, the xHC USB 2.0 Port Routing(XUSB2PR) at offset 0xD0-0xD3h decides the setting of mapping the port to EHCI controller or xHC controller. And the port mapped to xHC will enable xHCI during bus resume. The setting of disabling bluetooth adapter's connected port is 0x000001D9. The value can be obtained by few times 1 bit flip operation. The suited configuration should have the 'lsusb -t' result with bluetooth using ehci: /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M |__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M |__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M |__ Port 6: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M |__ Port 6: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M Signed-off-by: Kai-Chuan Hsieh <kai.chiuan@gmail.com> Acked-by: Corentin Chary <corentin.chary@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [andy: resolve merge conflict in asus-wmi.h] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-13platform/x86: intel_mid_thermal: Fix suspend handlers unused warningBorislav Petkov1-0/+2
Fix: drivers/platform/x86/intel_mid_thermal.c:424:12: warning: ‘mid_thermal_resume’ defined but not used [-Wunused-function] static int mid_thermal_resume(struct device *dev) ^ drivers/platform/x86/intel_mid_thermal.c:436:12: warning: ‘mid_thermal_suspend’ defined but not used [-Wunused-function] static int mid_thermal_suspend(struct device *dev) ^ which I see during randbuilds here. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Darren Hart <dvhart@infradead.org> Cc: platform-driver-x86@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-13platform/x86: intel-vbtn: Switch to use devm_input_allocate_deviceAxel Lin1-28/+5
Use devm_input_allocate_device to simplify the error handling code. This conversion also makes input_register_device() to be called after acpi_remove_notify_handler. This avoid a small window that it's possible to call notify_handler after unregister input device. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-13platform/x86: Use ACPI_FAILURE at appropriate placesAxel Lin5-7/+7
Use ACPI_FAILURE() to replace !ACPI_SUCCESS(), this avoid !! operations. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-13platform/x86: dell-wmi: Add events created by Dell Rugged 2-in-1sMario Limonciello1-0/+10
The Dell Rugged 7202 has 3 programmable buttons (labeled P1, P2, P3) and a detachable keyboard/mouse dock. Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-13platform/x86: dell-wmi: Adjust wifi catcher to emit KEY_WLANMario Limonciello1-1/+1
Wifi catcher is a slider switch, that when slid past the on position will emit an event that is intended for launching a wifi application or applet when the machine is turned on. Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-13platform/x86: intel_pmc_core: Add KBL CPUID supportRajneesh Bhardwaj1-0/+4
This patch adds Kabylake CPU support for pmc_core driver. Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: intel_pmc_core: Add LTR IGNORE debug featureRajneesh Bhardwaj2-1/+58
SPT LTR_IGN register provides a means to make the PMC ignore the LTR values reported by the individual PCH devices. echo <IP Offset> > /sys/kernel/debug/pmc_core/ltr_ignore. When a particular IP Offset bit is set the PMC will ignore the LTR value reported by the corresponding IP when the PMC performs the latency coalescing. IP Offset IP Name 0 SPA 1 SPB 2 SATA 3 GBE 4 XHCI 5 RSVD 6 ME 7 EVA 8 SPC 9 Azalia/ADSP 10 RSVD 11 LPSS 12 SPD 13 SPE 14 Camera 15 ESPI 16 SCC 17 ISH Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> [dvhart: pmc_core_ltr_ignore_write local declaration order cleanup] Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: intel_pmc_core: Add MPHY PLL clock gating statusRajneesh Bhardwaj2-1/+69
ModPhy Common lanes can provide the clock gating status for the important system PLLs such as Gen2 USB3PCIE2 PLL, DMIPCIE3 PLL, SATA PLL and MIPI PLL. On SPT, in addition to the crystal oscillator clock, the 100Mhz Gen2 USB3PCI2 PLL clock is used as the PLL reference clock and Gen2 PLL idling is a necessary condition for the platform to go into low power states like PC10 and S0ix. Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: intel_pmc_core: ModPhy core lanes pg statusRajneesh Bhardwaj2-1/+175
The PCH implements a number of High Speed I/O (HSIO) lanes that are split between PCIe*, USB 3.0, SATA, GbE, USB OTG and SSIC. This patch shows the current power gating status of the available ModPhy Core lanes. This is done by sending a message to the PMC (MTPMC) that contains the XRAM register offset for the MPHY_CORE_STS_0 and MPHY_CORE_STS_1 and then by reading the response sent by the PMC (MFPMC). While enabling low power modes we often encounter situations when the ModPhy lanes are not power gated and it becomes hard to debug which lane is active and which is not in the absence of an external hardware debugger (JTAG/ITP). This patch eliminates the dependency on an external hardware debugger for reading the ModPhy Lanes power gating status. This patch requires PMC_READ_DISABLE setting to be disabled in the platform bios. cat /sys/kernel/debug/pmc_core/mphy_lanes_power_gating_status Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: intel_pmc_core: Add PCH IP Power Gating StatusRajneesh Bhardwaj2-5/+184
This patch adds the support for reading the power gating status of various devices present on Sunrise Point PCH. This is intended to be used for debugging purpose while tuning the platform for power optimizations and also to understand which devices (on PCH) are blocking the system to enter a low power state. Power Management Controller on Sunrise Point PCH provides access to "PGD PFET Enable Ack Status Registers (ppfear)". This patch reads and decodes this register and dumps the output in formatted manner showing various devices present on the PCH and their "Power Gating" status. Further documentation can be found in Intel 7th Gen Core family mobile u/y processor io datasheet volume 2. Sample output (stripped and not in order): cat /sys/kernel/debug/pmc_core/pch_ip_power_gating_status PMC State: Not Power gated OPI-DMI State: Not Power gated XHCI State: Power gated LPSS State: Power gated CSME_PSF State: Not power gated Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: intel_pmc_core: Fix PWRMBASE mask and mmio reg lenRajneesh Bhardwaj2-1/+3
On Sunrise Point PCH, the Power Management Controller provides 4K bytes of memory space for various power management and debug registers. This fix is needed to access power management & debug registers that are mapped at a higher offset. Also, this provides a fix for correctly masking the PWRMBASE as the initial bits (0-11) are reserved. Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13platform/x86: acer-wmi: Only supports AMW0_GUID1 on acer familyLee, Chun-Yi1-0/+56
The AMW0_GUID1 wmi is not only found on Acer family but also other machines like Lenovo, Fujitsu and Medion. In the past, acer-wmi handled those non-Acer machines by quirks list. But actually acer-wmi driver was loaded on any machine that had AMW0_GUID1. This behavior is strange because those machines should be supported by appropriate wmi drivers. e.g. fujitsu-laptop, ideapad-laptop. This patch adds the logic to check the machine that has AMW0_GUID1 should be in Acer/Packard Bell/Gateway white list. But, it still keeps the quirk list of those supported non-acer machines for backward compatibility. Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-11-14Merge 4.9-rc5 into char-misc-nextGreg Kroah-Hartman4-9/+28
We want those fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14Merge 4.9-rc5 into staging-nextGreg Kroah-Hartman4-9/+28
We want the staging/iio fixes in here as well to resolve issues and merge problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-11Merge tag 'acpi-4.9-rc5' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a recent regression in the 8250_dw serial driver introduced by adding a quirk for the APM X-Gene SoC to it which uncovered an issue related to the handling of built-in device properties in the core ACPI device enumeration code (Heikki Krogerus)" * tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / platform: Add support for build-in properties
2016-11-11Merge branch 'device-properties'Rafael J. Wysocki2-2/+2
* device-properties: ACPI / platform: Add support for build-in properties
2016-11-10platform: goldfish: pipe: use get_user_pages_unlocked()Lorenzo Stoakes1-4/+2
Moving from get_user_pages() to get_user_pages_unlocked() simplifies the code and takes advantage of VM_FAULT_RETRY functionality when faulting in pages. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10ACPI / platform: Add support for build-in propertiesHeikki Krogerus2-2/+2
We have a couple of drivers, acpi_apd.c and acpi_lpss.c, that need to pass extra build-in properties to the devices they create. Previously the drivers added those properties to the struct device which is member of the struct acpi_device, but that does not work. Those properties need to be assigned to the struct device of the platform device instead in order for them to become available to the drivers. To fix this, this patch changes acpi_create_platform_device function to take struct property_entry pointer as parameter. Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC) Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Yazen Ghannam <yazen.ghannam@amd.com> Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-07Merge tag 'iio-for-4.10b' of ↵Greg Kroah-Hartman1-0/+159
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle This includes two branch merges for elements that may also go via MFD. New device support * cros_ec - new driver to support these Chrome OS contiguous sensors which are behind the Chrome OS embedded controller. Requires a few minor MFD and chrome platform changes. One follow up fix deals with some dependency issues in Kconfig. * mpu-3050 - new driver and device tree bindings for this venerable device. * st_accel - support for the lng2dm an Driver features * ad7192 - Add DVdd regulator handling * ad9832 - Add DVDD regulator handling * at91 - Suspend and resume support * si7020 - Device tree bindings * ti-am335x - DMA support - uses dma to accelerate short bursts of read back rather than full blown DMA buffer support. Greatly improved performance. Includes an MFD addition to give access to the address needed for DMA. * tsl2583 - Device tree bindings Cleanups and minor fixes * ad7192 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) - Rename reg variable to reflect which regulator it is * ad5933 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * ad7746 - Fix a missing return value (fallout from previous patch set) * ad7780 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * ad9832 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) - Rename reg regulator to reflect which one it is * ad9834 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * hts221 - Remove a duplicated include * maxim thermocouple - Handle a wrong storage side in read function. Prevent any problems that might be introduced by additions to this driver in future. * tsl2583 - big set from Brian Masney to drive this towards a staging graduation. - Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps) - Improved error handling in various functions - Drop redundant power_state custom sysfs attribute. - Use IIO_*_ATTR* macros for remaining attributes. - Return an error code to userspace on invalid parameters being writen to sysfs files. - Add locking to various attribute accesses to remove possible races. - Add defines for various magic numbers. - Use smbus_read_byte_data instead of a write_byte followed by read_byte. - Query only relevant registers in probe. - Tidy up ordering of code comments. - Remove a pointless power off sequence in taos_chip_on. - Don't bother shutting down the chip when updating the lux table. The table is held entirely in the driver and doesn't effect the chip at all. - Drop a redundant i2c call in taos_als_calibrate where the same register is read twice in a row.
2016-10-25platform/chrome: cros_ec_dev - Register cros-ec sensorsEnric Balletbo i Serra1-0/+122
Check whether the ChromeOS Embedded Controller is a sensor hub and in such case issue a command to get the number of sensors and register them all. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-25platform/chrome: Introduce a new function to check EC features.Vincent Palatin1-0/+37
Use the EC_CMD_GET_FEATURES message to check the supported features for each MCU. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> [tomeu: adapted to changes in mainline] Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> [enric: remove references to USB PD feature and do it more generic] Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> For the MFD changes: Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23platform/x86: Introduce support for Mellanox hotplug driverVadim Pasternak3-0/+527
Enable system support for the Mellanox Technologies hotplug platform driver, which provides support for the next Mellanox basic systems: "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740", "msn2100" and also various number of derivative systems from the above basic types. This driver handles hot-plug events for the power suppliers, power cables and fans for the above systems. The Kconfig currently controlling compilation of this code is: driver/platform/x86:config MLX_CPLD_PLATFORM tristate "Mellanox platform hotplug driver support" Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-19toshiba-wmi: Fix loading the driver on non Toshiba laptopsAzael Avalos1-7/+19
Bug 150611 uncovered that the WMI ID used by the toshiba-wmi driver is not Toshiba specific, and as such, the driver was being loaded on non Toshiba laptops too. This patch adds a DMI matching list checking for TOSHIBA as the vendor, refusing to load if it is not. Also the WMI GUID was renamed, dropping the TOSHIBA_ prefix, to better reflect that such GUID is not a Toshiba specific one. Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-19ideapad-laptop: Add another DMI entry for Yoga 900Mika Westerberg1-0/+7
This particular laptop has its motherboard replaced and after that, even with the latest BIOS, some DMI identification strings have become "INVALID". This includes DMI_PRODUCT_VERSION which results Wifi being blocked. It seems that DMI_BOARD_NAME is still valid so use that as an alternative for Lenovo Yoga 900. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-19Merge tag 'platform-drivers-x86-v4.9-2' of ↵Linus Torvalds2-0/+8
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Fix a Kconfig issue leading potential link failure, and add a DMI match for an existing quirk. asus-wmi: - add SERIO_I8042 dependency ideapad-laptop: - Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list" * tag 'platform-drivers-x86-v4.9-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: asus-wmi: add SERIO_I8042 dependency platform/x86: ideapad-laptop: Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list
2016-10-19Merge branch 'gup_flag-cleanups'Linus Torvalds1-1/+2
Merge the gup_flags cleanups from Lorenzo Stoakes: "This patch series adjusts functions in the get_user_pages* family such that desired FOLL_* flags are passed as an argument rather than implied by flags. The purpose of this change is to make the use of FOLL_FORCE explicit so it is easier to grep for and clearer to callers that this flag is being used. The use of FOLL_FORCE is an issue as it overrides missing VM_READ/VM_WRITE flags for the VMA whose pages we are reading from/writing to, which can result in surprising behaviour. The patch series came out of the discussion around commit 38e088546522 ("mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing"), which addressed a BUG_ON() being triggered when a page was faulted in with PROT_NONE set but having been overridden by FOLL_FORCE. do_numa_page() was run on the assumption the page _must_ be one marked for NUMA node migration as an actual PROT_NONE page would have been dealt with prior to this code path, however FOLL_FORCE introduced a situation where this assumption did not hold. See https://marc.info/?l=linux-mm&m=147585445805166 for the patch proposal" Additionally, there's a fix for an ancient bug related to FOLL_FORCE and FOLL_WRITE by me. [ This branch was rebased recently to add a few more acked-by's and reviewed-by's ] * gup_flag-cleanups: mm: replace access_process_vm() write parameter with gup_flags mm: replace access_remote_vm() write parameter with gup_flags mm: replace __access_remote_vm() write parameter with gup_flags mm: replace get_user_pages_remote() write/force parameters with gup_flags mm: replace get_user_pages() write/force parameters with gup_flags mm: replace get_vaddr_frames() write/force parameters with gup_flags mm: replace get_user_pages_locked() write/force parameters with gup_flags mm: replace get_user_pages_unlocked() write/force parameters with gup_flags mm: remove write/force parameters from __get_user_pages_unlocked() mm: remove write/force parameters from __get_user_pages_locked() mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
2016-10-19mm: replace get_user_pages() write/force parameters with gup_flagsLorenzo Stoakes1-1/+2
This removes the 'write' and 'force' from get_user_pages() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-13Merge tag 'platform-drivers-x86-v4.9-1' of ↵Linus Torvalds9-230/+300
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform drivers updates from Darren Hart: "Cleanups, refactoring, and a couple bug fixes. intel_pmc_core: - avoid boot time warning for !CONFIG_DEBUGFS_FS intel_pmc_ipc: - Convert to use platform_device_register_full asus-wmi: - Filter buggy scan codes on ASUS Q500A toshiba_bluetooth: - Decouple an error checking status code toshiba_haps: - Change logging level from info to debug - Split ACPI and HDD protection error handling asus-laptop: - get rid of parse_arg() asus-wmi: - fix asus ux303ub brightness issue toshiba_acpi: - Fix typo in *_cooling_method_set function - Change error checking logic from TCI functions - Clean up variable declaration" * tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A platform/x86: toshiba_bluetooth: Decouple an error checking status code platform/x86: toshiba_haps: Change logging level from info to debug platform/x86: toshiba_haps: Split ACPI and HDD protection error handling platform/x86: asus-laptop: get rid of parse_arg() platform/x86: asus-wmi: fix asus ux303ub brightness issue platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function platform/x86: toshiba_acpi: Change error checking logic from TCI functions platform/x86: toshiba_acpi: Clean up variable declaration
2016-10-12platform/x86: asus-wmi: add SERIO_I8042 dependencyArnd Bergmann1-0/+1
A recent bugfix added a call to i8042_install_filter but did not add the dependency, leading to possible link errors: drivers/platform/built-in.o: In function `asus_nb_wmi_quirks': asus-nb-wmi.c:(.text+0x23af): undefined reference to `i8042_install_filter' This adds a dependency on SERIO_I8042||SERIO_I8042=n to indicate that we can build the driver when the i8042 driver is disabled, but it cannot be built-in when that is a loadable module. Fixes: b5643539b825 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-12Merge branch 'next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal managament updates from Zhang Rui: - Enhance thermal "userspace" governor to export the reason when a thermal event is triggered and delivered to user space. From Srinivas Pandruvada - Introduce a single TSENS thermal driver for the different versions of the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for msm8916, msm8960, msm8974 and msm8996 families is also added. From Rajendra Nayak - Introduce hardware-tracked trip points support to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is changed, the trip points immediately below and above the current temperature are found, driver callback is invoked to program the hardware to get notified when either of the two trip points are triggered. Hardware-tracked trip points support for rockchip thermal driver is also added at the same time. From Sascha Hauer, Caesar Wang - Introduce a new thermal driver, which enables TMU (Thermal Monitor Unit) on QorIQ platform. From Jia Hongtao - Introduce a new thermal driver for Maxim MAX77620. From Laxman Dewangan - Introduce a new thermal driver for Intel platforms using WhiskeyCove PMIC. From Bin Gao - Add mt2701 chip support to MTK thermal driver. From Dawei Chien - Enhance Tegra thermal driver to enable soctherm node and set "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei Ni - Add resume support for tango thermal driver. From Marc Gonzalez - several small fixes and improvements for rockchip, qcom, imx, rcar, mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy, Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh Kang * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits) thermal: int3403: Process trip change notification thermal: int340x: New Interface to read trip and notify thermal: user_space gov: Add additional information in uevent thermal: Enhance thermal_zone_device_update for events arm64: tegra: set hot trips for Tegra210 arm64: tegra: set critical trips for Tegra210 arm64: tegra: add soctherm node for Tegra210 arm64: tegra: set hot trips for Tegra132 arm64: tegra: set critical trips for Tegra132 arm64: tegra: use tegra132-soctherm for Tegra132 arm: tegra: set hot trips for Tegra124 arm: tegra: set critical trips for Tegra124 thermal: tegra: add hw-throttle for Tegra132 thermal: tegra: add hw-throttle function of: Add bindings of hw throttle for Tegra soctherm thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register thermal: Add Mediatek thermal driver for mt2701. dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: max77620: Add thermal driver for reporting junction temp thermal: max77620: Add DT binding doc for thermal driver ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 03:37:04 +0000