summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2011-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds50-238/+430
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) ipv6: check for IPv4 mapped addresses when connecting IPv6 sockets mlx4: decreasing ref count when removing mac net: Fix security_socket_sendmsg() bypass problem. net: Cap number of elements for sendmmsg net: sendmmsg should only return an error if no messages were sent ixgbe: fix PHY link setup for 82599 ixgbe: fix __ixgbe_notify_dca() bail out code igb: fix WOL on second port of i350 device e1000e: minor re-order of #include files e1000e: remove unnecessary check for NULL pointer intel drivers: repair missing flush operations macb: restore wrap bit when performing underrun cleanup cdc_ncm: fix endianness problem. irda: use PCI_VENDOR_ID_* mlx4: Fixing Ethernet unicast packet steering net: fix NULL dereferences in check_peer_redir() bnx2x: Clear MDIO access warning during first driver load bnx2x: Fix BCM578xx MAC test bnx2x: Fix BCM54618se invalid link indication bnx2x: Fix BCM84833 link ...
2011-08-05mlx4: decreasing ref count when removing macYevgeny Petrilin1-3/+6
For older FW versions, when a Mac address removed from Mac table, we should set 0 for reference count for the corresponding Mac index. Fixes a bug where removing Mac from the table still left that entry as invalid. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-04ixgbe: fix PHY link setup for 82599Emil Tantilov1-0/+1
Fix pointer to setup_link for 82599. This resolves some link issues when advertising modes unsupported by the link partner. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04ixgbe: fix __ixgbe_notify_dca() bail out codeDon Skidmore1-1/+1
The way __ixgbe_notify_dca() was currently set up it would not be possible to add a requester. Both cases of the IXGBE_FLAG_DCA_ENABLED bit being on and off would lead to the function exiting for a DCA_PROVIDER_ADD. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04igb: fix WOL on second port of i350 deviceCarolyn Wyborny1-1/+1
This patch fixes a problem where WOL would fail on second port of i350 device. Reported-by: Martin Wilck <martin.wilck@ts.fujitsu.com> Reported-by: Stefan Assmann<sassmann@redhat.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04e1000e: minor re-order of #include filesBruce Allan2-2/+2
The recent commit a6b7a407 when back-ported to the out-of-tree e1000e driver caused a compilation error on older kernels which required a re-ordering of the #include files. This cosmetic patch syncs the two drivers for easier maintainability. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04e1000e: remove unnecessary check for NULL pointerBruce Allan1-2/+1
The array shadow_ram is never NULL. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04intel drivers: repair missing flush operationsJesse Brandeburg18-0/+59
after review of all intel drivers, found several instances where drivers had the incorrect pattern of: memory mapped write(); delay(); which should always be: memory mapped write(); write flush(); /* aka memory mapped read */ delay(); explanation: The reason for including the flush is that writes can be held (posted) in PCI/PCIe bridges, but the read always has to complete synchronously and therefore has to flush all pending writes to a device. If a write is held and followed by a delay, the delay means nothing because the write may not have reached hardware (maybe even not until the next read) Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04macb: restore wrap bit when performing underrun cleanupTord Andersson1-0/+3
When TX underrun occurs, a cleanup is performed that marks all buffers as used. As a side effect it also clears the wrap bit in the last buffer. This patch will restore the wrap bit. Signed-off-by: Tord Andersson <tord.andersson@endian.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-04cdc_ncm: fix endianness problem.Giuseppe Scrivano1-100/+56
Fix a misusage of the struct usb_cdc_notification to pass arguments to the usb_control_msg function. The usb_control_msg function expects host endian arguments but usb_cdc_notification stores these values as little endian. Now usb_control_msg is directly invoked with host endian values. Signed-off-by: Giuseppe Scrivano <giuseppe@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03irda: use PCI_VENDOR_ID_*Jon Mason1-10/+8
Use PCI_VENDOR_ID_* from pci_ids.h instead of creating #define locally. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03mlx4: Fixing Ethernet unicast packet steeringYevgeny Petrilin2-1/+3
For older FW versions, fixing the usage of per port Mac table. For each port we must define the base QP number, which is passed to the HW. Setting the correct value in SET_PORT FW command to enable the steering. Reported-by: Roland Dreier <roland@purestorage.com> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03Merge branch 'for-davem' of ↵David S. Miller16-40/+84
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next ↵John W. Linville16-40/+84
into for-davem
2011-08-03bnx2x: Clear MDIO access warning during first driver loadYaniv Rosner1-1/+5
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM578xx MAC testYaniv Rosner1-5/+4
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM54618se invalid link indicationYaniv Rosner1-2/+9
After resetting BCM54618se, link partner would still see link since the PHY wasn't put into low-power state. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM84833 linkYaniv Rosner1-9/+12
BCM84833 fail to link due to incorrect auto-negotiation setting. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix link issue with DAC over 578xxYaniv Rosner1-0/+3
Fix no-link issue on BCM578xx when direct attached cable is connected since Warpcore microcode restart was missing to re-read the new mode. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix LED behaviorYaniv Rosner1-7/+17
This fix resolve two problems seen regarding LED: 1. LED doesn't flash during port identification. 2. Traffic LED sometimes do not blink. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM578xx-B0 MDIO accessYaniv Rosner3-3/+18
Fix MDIO access to Warpcore on new chip version of 578xx. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix remote fault handlingYaniv Rosner3-45/+69
Fix couple of issues of remote fault detection and handling: Link may go down due to remote fault indications during link establishment. Possible link down after primary function migration. Remote fault was not detected on 578xx. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix chip hanging due to TX pipe stall.Yaniv Rosner1-1/+11
Fix a problem in which the 578xx chip hangs after running traffic, and then pulling the network cable. This occurs since TX pipe is stalled due to missing XON indication towards the NIG. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix missing pause on for 578xxYaniv Rosner2-0/+8
When link speed is 1G and below, pause weren't sent due to missing pause setting in the UMAC. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02r8169 : MAC address change fix for the 8168e-vl.françois romieu1-0/+27
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=39252 Hayes suggested that the usual MAC{0, 4} register writes be completed with writes to extended GigaMAC registers : - 0xe0 .. 0xe5 - 0xf2 .. 0xf7 Registers 0xf0 and 0xf1 should be set to 0. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02iwlagn: 5000 do not support idle modeWey-Yi Guy3-1/+5
5000 series has issue supporting power save idle mode: commit 9dc2153315650eae220898668b6aa56a25c130be iwlwifi: always support idle mode for agn devices For agn devices, always support idle mode which help power consumption in idle unassociated state. the above changes cause 5000 become not stable when power management is "on" http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2312 Cc: stable@kernel.org #2.6.39, #3.0.0 Reported-by: Devin J Pohly <djpohly+iwl@gmail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-02rt2x00: fix usage of NULL queueStanislaw Gruszka1-2/+3
We may call rt2x00queue_pause_queue(queue) with queue == NULL. Bug was introduced by commit 62fe778412b36791b7897cfa139342906fbbf07b "rt2x00: Fix stuck queue in tx failure case" . Cc: stable@kernel.org # 3.0+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-02rt2x00: Fix compilation without CONFIG_RT2X00_LIB_CRYPTOHelmut Schaa1-1/+2
This was introduced by commit 77b5621bac4a56b83b9081f48d4e7d1accdde400 (rt2x00: Don't use queue entry as parameter when creating TX descriptor.) Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-02iwlagn: sysfs couldn't find the priv pointerEmmanuel Grumbach1-9/+9
This bug has been introduced by: d593411084a56124aa9d80aafa15db8463b2d8f7 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Mon Jul 11 10:48:51 2011 +0300 iwlagn: simplify the bus architecture Revert part of the buggy patch: dev_get_drvdata will now return iwl_priv as it did before the patch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Tested-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-02bnx2x: Prevent restarting Tx during bnx2x_nic_unloadVladislav Zolotarov1-2/+8
Tx queues were stopped before bp->state was changed to a value different from BNX2X_STATE_OPEN, which allowed the bnx2x_tx_int() called from the NAPI context to re-enable it. This then allowed the netdev->ndo_start_xmit() to be called in the middle of the function reset and rings freeing. This patch changes bp->state to a value different from BNX2X_STATE_OPEN BEFORE disabling the Tx queues in order to restore the broken protection against the above race in the bnx2x_tx_int(). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-01rt2x00: rt2800: fix zeroing skb structureStanislaw Gruszka1-2/+1
We should clear skb->data not skb itself. Bug was introduced by: commit 0b8004aa12d13ec750d102ba4082a95f0107c649 "rt2x00: Properly reserve room for descriptors in skbs". Cc: stable@kernel.org # 2.6.36+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-01rtlwifi: Fix kernel oops on ARM SOCLarry Finger1-9/+11
This driver uses information from the self member of the pci_bus struct to get information regarding the bridge to which the PCIe device is attached. Unfortunately, this member is not established on all architectures, which leads to a kernel oops. Skipping the entire block that uses the self member to determine the bridge vendor will only affect RTL8192DE devices as that driver sets the ASPM support flag differently when the bridge vendor is Intel. If the self member is available, there is no functional change. This patch fixes Bugzilla No. 40212. Reported-by: Hubert Liao <liao.hubertt@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [back to 2.6.38] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-01ath9k: skip ->config_pci_powersave() if PCIe port has ASPM disabledStanislaw Gruszka5-13/+40
We receive many bug reports about system hang during suspend/resume when ath9k driver is in use. Adrian Chadd remarked that this problem happens on systems that have ASPM disabled. To do not hit the bug, skip doing ->config_pci_powersave magic if PCIe downstream port device, which ath9k device is connected to, has ASPM disabled. Bug was introduced by: commit 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f Author: Vivek Natarajan <vnatarajan@atheros.com> Date: Mon Apr 5 14:48:04 2010 +0530 ath9k: Add support for newer AR9285 chipsets. Patch should address: https://bugzilla.kernel.org/show_bug.cgi?id=37462 https://bugzilla.kernel.org/show_bug.cgi?id=37082 https://bugzilla.redhat.com/show_bug.cgi?id=697157 however I did not receive confirmation about that, except from Camilo Mesias, whose system stops hang regularly with this patch (but still hangs from time to time, but this is probably some other bug). Tested-by: Camilo Mesias <camilo@mesias.co.uk> Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-01iwlegacy: set tx power after rxon_assocStanislaw Gruszka2-3/+11
If settings of tx power was deferred during scan or changing channel we have to setup them during commit rxon. Fix problem on 3945 (4965 already has this fix). Optimize code to apply tx settings only when tx power was actually changed. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-01ath9k: initialize tx chainmask before testing channel tx power valuesFelix Fietkau1-0/+2
With an uninitialized chainmask, the per-channel power will only contain the power limits for a single chain instead of the combined tx power. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-01drivers/net/niu.c: adjust array indexJulia Lawall1-2/+2
Convert array index from the loop bound to the loop index. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,ar; @@ for(e1 = 0; e1 < e2; e1++) { <... ar[ - e2 + e1 ] ...> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds3-2/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: smc91c92_cs.c: fix bogus compiler warning orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002 hostap_cs: support cards with "Version 01.02" as third product ID pcmcia: add PCMCIA_DEVICE_MANF_CARD_PROD_ID3 pxa2xx pcmcia - stargate 2 use gpio array. pcmcia: pxa2xx: remove empty socket_init / socket_resume functions. drivers:pcmcia:soc_common: make socket_init and socket_suspend optional
2011-07-30Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: sungem: fix compile failure caused by trivial #include consolidation
2011-07-29Merge branch 'next/dt' of ↵Linus Torvalds4-49/+135
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (21 commits) arm/dt: tegra devicetree support arm/versatile: Add device tree support dt/irq: add irq_domain_generate_simple() helper irq: add irq_domain translation infrastructure dmaengine: imx-sdma: add device tree probe support dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name dmaengine: imx-sdma: use platform_device_id to identify sdma version mmc: sdhci-esdhc-imx: add device tree probe support mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx() mmc: sdhci-esdhc-imx: do not reference platform data after probe mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5 net/fec: add device tree probe support net: ibm_newemac: convert it to use of_get_phy_mode dt/net: add helper function of_get_phy_mode net/fec: gasket needs to be enabled for some i.mx serial/imx: add device tree probe support serial/imx: get rid of the uses of cpu_is_mx1() arm/dt: Add dtb make rule arm/dt: Add skeleton dtsi file ...
2011-07-29smc91c92_cs.c: fix bogus compiler warningDominik Brodowski1-1/+1
On a recent compile, I got this warning: CC [M] drivers/net/pcmcia/smc91c92_cs.o drivers/net/pcmcia/smc91c92_cs.c: In function ‘smc91c92_probe’: drivers/net/pcmcia/smc91c92_cs.c:812:12: warning: ‘j’ may be used uninitialized in this function However, "j" is only used in a branch which has the same condition as a previous branch, where j is set, e.g. int j; if (CONDITION) j = VALUE ... if (CONDITION) printk(j) Still, avoid this warning, as it is easy to circumvent. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002Pavel Roskin1-1/+4
Without CONFIG_HERMES_PRISM, only match cards that have "Version 01.01" as the third product ID. Those have Agere firmware. With CONFIG_HERMES_PRISM, match all 0x0156:0x0002 cards. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29hostap_cs: support cards with "Version 01.02" as third product IDPavel Roskin1-0/+2
Cards with numeric ID 0x0156:0x0002 and third ID "Version 01.02" can be assumed to have Intersil firmware. Cards with Agere firmware use "Version 01.01". Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29sungem: fix compile failure caused by trivial #include consolidationJiri Kosina1-1/+2
Only Sparc and PPC actually have the asm/prom.h include and as such they can't be moved outside of the ifdefs. Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-28r8169: Add support for D-Link 530T rev C1 (Kernel Bug 38862)Lennart Sorensen1-0/+1
The D-Link DGE-530T rev C1 is a re-badged Realtek 8169 named DLG10028C, unlike the previous revisions which were skge based. It is probably the same as the discontinued DGE-528T (0x4300) other than the PCI ID. The PCI ID is 0x1186:0x4302. Adding it to r8169.c where 0x1186:0x4300 is already found makes the card be detected and work. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=38862 Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-28sis190: Rx filter init is needed for MAC address change.Klement Fish1-1/+11
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=34552 Signed-off-by: Klement Fish <klement2@azet.sk> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds20-223/+318
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) tg3: Remove 5719 jumbo frames and TSO blocks tg3: Break larger frags into 4k chunks for 5719 tg3: Add tx BD budgeting code tg3: Consolidate code that calls tg3_tx_set_bd() tg3: Add partial fragment unmapping code tg3: Generalize tg3_skb_error_unmap() tg3: Remove short DMA check for 1st fragment tg3: Simplify tx bd assignments tg3: Reintroduce tg3_tx_ring_info ASIX: Use only 11 bits of header for data size ASIX: Simplify condition in rx_fixup() Fix cdc-phonet build bonding: reduce noise during init bonding: fix string comparison errors net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared net: add IFF_SKB_TX_SHARED flag to priv_flags net: sock_sendmsg_nosec() is static forcedeth: fix vlans gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e gro: Only reset frag0 when skb can be pulled ...
2011-07-27tg3: Remove 5719 jumbo frames and TSO blocksMatt Carlson1-3/+3
The A0 revision of this chip is the only device that requires these features to be disabled. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27tg3: Break larger frags into 4k chunks for 5719Matt Carlson2-6/+47
The 5719 has bug where RDMAs larger than 4k can cause problems. This patch works around the problem by dividing larger DMA requests into something the hardware can handle. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27tg3: Add tx BD budgeting codeMatt Carlson1-20/+29
As the driver breaks large skb fragments into smaller submissions to the hardware, there is a new danger that BDs might get exhausted before all fragments have been mapped. This patch adds code to make sure tx BDs aren't oversubscribed and flag the condition if it happens. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27tg3: Consolidate code that calls tg3_tx_set_bd()Matt Carlson1-37/+42
This patch consolidates all code that populates tx BDs into a single routine. Setting tx BDs needs to be more carefully controlled to see if workarounds need to be applied. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 07:10:11 +0000