summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x_main.c
AgeCommit message (Collapse)AuthorFilesLines
2010-07-27bnx2x: Create separate folder for bnx2x driverDmitry Kravkov1-13933/+0
This commit includes files movement to newly created folder using git-mv command and fixes references in cnic and bnx2x code to each other. files moved using following: #!/bin/bash mkdir drivers/net/bnx2x/ list=$(cd drivers/net/ && ls bnx2x*.[ch]) for f in $list; do git mv -f drivers/net/$f drivers/net/bnx2x/$f done Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07bnx2x: Set RXHASH for LRO packetsVladislav Zolotarov1-7/+21
Set Toeplitz hash both for LRO and none-LRO skbs. The first CQE (TPA_START) will contain a hash for an LRO packet. Current code sets skb->rx_hash for none-LRO skbs only. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30netdev: Make ethtool_ops::set_flags() return -EINVAL for unsupported flagsBen Hutchings1-1/+1
The documented error code for attempts to set unsupported flags (or to clear flags that cannot be disabled) is EINVAL, not EOPNOTSUPP. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29bnx2x: fail when try to setup unsupported featuresStanislaw Gruszka1-0/+3
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2x: avoid TX timeout when stopping deviceStanislaw Gruszka1-4/+2
When stop device call netif_carrier_off() just after disabling TX queue to avoid possibility of netdev watchdog warning and ->ndo_tx_timeout() invocation. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05bnx2x: Fix check to get RX hashTom Herbert1-1/+1
Flag used in check to get rxhash out of the descriptor is incorrect one. Fix to use the proper features flag. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28bnx2x: Remove two prefetch()Eric Dumazet1-2/+0
1) Even on 64bit arches, sizeof(struct sk_buff) < 256 2) No need to prefetch same pointer twice. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Acked-by: Eliezer Tamir <eliezer@tamir.org.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23bnx2x: add support for receive hashingTom Herbert1-8/+18
Add support to bnx2x to extract Toeplitz hash out of the receive descriptor for use in skb->rxhash. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: Date and versionVladislav Zolotarov1-2/+2
Set version to 1.52.53-1. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: Don't report link down if has been already downVladislav Zolotarov1-2/+4
Author: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: Rework power state handling codeVladislav Zolotarov1-3/+9
Move "don't shut down the power" logic into bnx2x_set_power_state() to make the code cleaner. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: use mask in test_registers() to avoid parity errorVladislav Zolotarov1-1/+1
Properly mask the value to be written to the register (according to the register size) during the self-test. Otherwise immediate parity error would be generated. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: Fixed MSI-X enabling flowVladislav Zolotarov1-3/+25
Try to enable less MSI-X vectors if initial request has failed. Author: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: Added new statisticsVladislav Zolotarov1-44/+74
Added total_mcast/bcast_pkts_transmitted statistics. Author: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: White spacesVladislav Zolotarov1-160/+205
White spaces, code readability and prints. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: Protect code with NOMCPVladislav Zolotarov1-12/+32
Don't run code that can't be run if MCP is not present. This will prevent NULL pointer dereferencing. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: Increase DMAE max write size for 57711Vladislav Zolotarov1-4/+5
Increase DMAE max write size for 57711 to the maximum allowed value. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: Use VPD-R V0 entry to display firmware revisionVladislav Zolotarov1-2/+69
Author: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19bnx2x: Parity errors handling for 57710 and 57711Vladislav Zolotarov1-53/+992
This patch introduces the parity errors handling code for 57710 and 57711 chips. HW is configured to stop all DMA transactions to the host and sending packets to the network once parity error is detected, which is meant to prevent silent data corruption. At the same time HW generates the attention interrupt to every function of the device where parity has been detected so that driver can start the recovery flow. The recovery is actually resetting the chip and restarting the driver on all active functions of the chip where the parity error has been reported. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07bnx2x: use the DMA API instead of the pci equivalentsFUJITA Tomonori1-54/+56
The DMA API is preferred. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Vladislav Zolotarov <vladz@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03net: convert multicast list to list_headJiri Pirko1-9/+9
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01bnx2x: Added GRO supportDmitry Kravkov1-9/+11
Adding GRO support on top of the HW LRO (TPA) support – there is no measurable performance drawback of adding GRO on top of it, and it allows better performance when LRO (TPA) is turned off for virtualization or bridging. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15bnx2x: change smp_mb() comment to conform the trueStanislaw Gruszka1-2/+5
Access to fp->tx_bp_prod is protected by __netif_tx_lock, smp_mb() is not needed for that. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15bnx2x: remove not necessary compiler barrierStanislaw Gruszka1-1/+0
Access to fp->tx_bd_prod is protected by __netif_tx_lock, so we do not need any barrier for that. Update of fp->tx_bd_cons in bnx2x_tx_int() is not protected by lock, but barrier() nor smb_mb() in bnx2x_tx_avail() not guarantee we will see values that is written on other cpu. Ordering issues between netif_tx_stop_queue(), netif_tx_queue_stopped(), fp->tx_bd_cons = bd_cons and bnx2x_tx_avail() are already handled by smp_mb() in bnx2x_tx_int() and bnx2x_start_xmit(). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15bnx2x: use smp_mb() to keep ordering of read write operationsStanislaw Gruszka1-1/+1
Since we want to keep ordering of write to fp->bd_tx_cons and netif_tx_queue_stopped(txq), what is read of txq->state, we have to use general memory barrier. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bnx2x: Tx barriers and locksVladislav Zolotarov1-9/+22
[Resending with the proper subject. Sorry for the mess. ] This patch is based on the RFC of Stanislaw Gruszka. More specifically it fixes two possible races: - One, described by Stanislaw, may lead to permanent disabling of the Tx queue. This is fixed by adding the smp_wmb() to propagate the BD consumer change towards the memory. - Second may lead to bnx2x_start_xmit() returning NETDEV_TX_BUSY. This is fixed by taking a tx_lock() before rechecking the number of available Tx BDs. thanks, vlad Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22net: convert multiple drivers to use netdev_for_each_mc_addr, part3Jiri Pirko1-8/+4
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/bnx2x: Use (pr|netdev|netif)_<level> macro helpersJoe Perches1-103/+82
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert struct bnx2x member msglevel to msg_enable for netif_msg_<foo> macros Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17bnx2x: version number and dateVladislav Zolotarov1-2/+2
Updated release version and date: 1.52.1-6 and 2010/02/16 Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17bnx2x: Use firmware 5.2.13Vladislav Zolotarov1-1/+1
Switch to the new firmware version (5.2.13). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17bnx2x: fix in 57710 self-testVladislav Zolotarov1-1/+2
Bug fix: Use the last unicast entry in CAM in bnx2x_test_int(). Relevant for 57710 only. Author: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17bnx2x: Do not allow enabling LRO if disable_tpa=1Vladislav Zolotarov1-6/+8
Bug fix: Do not allow enabling LRO if disable_tpa=1. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17bnx2x: clean up in case of error in bnx2x_init_hw()Vladislav Zolotarov1-0/+3
Bug fix: clean up MCP state in case of error in bnx2x_init_hw(). Author: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17bnx2x: Properly release allocated MSI-X/MSI vectorsVladislav Zolotarov1-11/+14
Bug fix: Properly release allocated MSI-X/MSI vectors if ifup failed due to lack of memory. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko1-3/+4
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28netdev: remove HAVE_ leftoversAlexey Dobriyan1-2/+2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10Merge branch 'master' of ↵David S. Miller1-0/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/benet/be_cmds.h include/linux/sysctl.h
2010-01-07drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan1-1/+1
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-25bnx2x: Initialize cnic status block during chip resetMichael Chan1-0/+2
When the device is reset during MTU change, ring size change, or self test, etc, the cnic status block needs to be properly initialized if cnic is registered. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18bnx2x: Don't set netdev->trans_startVladislav Zolotarov1-3/+0
Setting dev->trans_start caused spurious watchdog warnings. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17bnx2x: Handle Rx and Tx together in NAPIVladislav Zolotarov1-216/+151
Put Tx and Rx DPC to be handled in the NAPI: - Saves status blocks. - Moves the Tx work from hardIRQ to NAPI. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-10bnx2x: version 1.52.1-4Eilon Greenstein1-2/+2
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-10bnx2x: Change coalescing granularity to 4usEilon Greenstein1-6/+7
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-10bnx2x: Remove misleading error printEilon Greenstein1-5/+0
Failing to allocate MSI-X vectors is not an error and should not be printed as such Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-10bnx2x: GSO implies CSUM offloadEilon Greenstein1-2/+2
Making sure that whenever the FW/HW is configured for GSO, it is also configured to CSUM offload Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-10bnx2x: declare MODULE_FIRMWAREBen Hutchings1-13/+14
Replace run-time string formatting with preprocessor string manipulation. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05bnx2x: version 1.52.1-3Yaniv Rosner1-2/+2
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05bnx2x: Fix CL73 autoneg issuesYaniv Rosner1-11/+5
- Advertise 1G KX4 in CL73 when 1G speed capability is enabled - Add flow-control negotiation over CL73 - External loopback test on Serdes should be done in FORCE mode, since in CL73 it is unable to link up with the same core using AUTONEG - Fix bnx2x_set_led function to support CL73 link leds Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15bnx2x: Update to version 1.52.1-1Eilon Greenstein1-2/+2
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15bnx2x: Report the maximal available BW as link speedEilon Greenstein1-1/+13
The device is limited to the maximal BW allocation, so it should be displayed as the link speed to notify the user. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 21:53:13 +0000