summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2008-08-10mfd: tc6393 cleanup and updateIan Molton1-63/+93
This patchset cleans up the TC6393XB support. * Add provision for the MMC subdevice * Disable / enable clocks on suspend / resume * Remove fragments of badly merged code (eg. linux/fb include etc.) * Use a device specific clock name to break dependancy on ARM/PXA2XX * Drop unnecessary resource names * Switch to tmio_io* accessors Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: have TMIO drivers and subdevices depend on ARMSamuel Ortiz1-0/+9
The TMIO chips are only found (and thus tested) on ARM machines. Moreover, we don't want the TMIO cells to be built if one of the TMIO driver is not selected (which indirectly make the TMIO cells drivers depend on ARM as well). Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: t7l66 MMC platform dataIan Molton1-0/+5
The tmio MMC driver needs the cell to be passed as a platform data. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: tc6387 MMC platform dataIan Molton1-1/+10
We need to pass the cell as the platform data. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: Fix 7l66 and 6387 according to the new mfd-core APISamuel Ortiz2-5/+10
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: Fix tc6393 according to the new tmio.hSamuel Ortiz1-3/+0
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: driver for the TC6387XB TMIO controller.Ian Molton3-0/+179
This patch adds support for the TC6387XB. Unlike other TMIO devices this one has only one subdevice and no interrupt mux, however using the MFD framework allows it to share the TMIO MMC driver. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: driver for the T7L66XB TMIO SoCIan Molton3-0/+416
This patchset provides support for the core functinality of the T7L66XB SoC from Toshiba. Supported in this patchset is the IRQ MUX, MMC controller and NAND flash controller. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King3-5/+5
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesRussell King2-19/+21
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King2-2/+2
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-29mfd: accept pure device as a parent, not only platform_deviceDmitry Baryshkov2-9/+9
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-29mfd: add platform_data to mfd_cellMike Rapoport2-1/+5
Adding platform_data to mfd_cell allows passing of platform data directly to the platform_device created for each cell and thus reuse of existing drivers. On the other side it can be used as a hook to mfd_cell itself removing the need in mfd_get_cell method. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-28mfd: Coding style fixesBen Dooks1-8/+7
Fix some coding style fixes in the mfd core driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-28mfd: Use to_platform_device instead of container_ofBen Dooks1-2/+1
Convert mfd_remove_devices_fn() to use to_platform_device() instead of doing container_of(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-27[ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*Dmitry Baryshkov2-8/+8
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1]. Remove them completely. Sed script for the reference: s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_PROBE/IRQ_TYPE_PROBE/g s/IRQT_NOEDGE/IRQ_TYPE_NONE/g Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-26asic3: platform_get_irq() may return signed unnoticedRoel Kluin1-3/+5
asic->irq_nr is unsigned. platform_get_irq() may return signed unnoticed Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Joe Perches <joe@perches.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25MFD_TC6393XB is ARM-onlyAdrian Bunk1-1/+1
Compile error on other architectures: CC drivers/mfd/tc6393xb.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c: In function ‘tc6393xb_attach_irq’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c:324: error: implicit declaration of function ‘set_irq_flags’ ... Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25gpiolib: allow user-selectionMichael Buesch1-2/+2
This patch adds functionality to the gpio-lib subsystem to make it possible to enable the gpio-lib code even if the architecture code didn't request to get it built in. The archtitecture code does still need to implement the gpiolib accessor functions in its asm/gpio.h file. This patch adds the implementations for x86 and PPC. With these changes it is possible to run generic GPIO expansion cards on every architecture that implements the trivial wrapper functions. Support for more architectures can easily be added. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25gpio: sysfs interfaceDavid Brownell1-0/+2
This adds a simple sysfs interface for GPIOs. /sys/class/gpio /export ... asks the kernel to export a GPIO to userspace /unexport ... to return a GPIO to the kernel /gpioN ... for each exported GPIO #N /value ... always readable, writes fail for input GPIOs /direction ... r/w as: in, out (default low); write high, low /gpiochipN ... for each gpiochip; #N is its first GPIO /base ... (r/o) same as N /label ... (r/o) descriptive, not necessarily unique /ngpio ... (r/o) number of GPIOs; numbered N .. N+(ngpio - 1) GPIOs claimed by kernel code may be exported by its owner using a new gpio_export() call, which should be most useful for driver debugging. Such exports may optionally be done without a "direction" attribute. Userspace may ask to take over a GPIO by writing to a sysfs control file, helping to cope with incomplete board support or other "one-off" requirements that don't merit full kernel support: echo 23 > /sys/class/gpio/export ... will gpio_request(23, "sysfs") and gpio_export(23); use /sys/class/gpio/gpio-23/direction to (re)configure it, when that GPIO can be used as both input and output. echo 23 > /sys/class/gpio/unexport ... will gpio_free(23), when it was exported as above The extra D-space footprint is a few hundred bytes, except for the sysfs resources associated with each exported GPIO. The additional I-space footprint is about two thirds of the current size of gpiolib (!). Since no /dev node creation is involved, no "udev" support is needed. Related changes: * This adds a device pointer to "struct gpio_chip". When GPIO providers initialize that, sysfs gpio class devices become children of that device instead of being "virtual" devices. * The (few) gpio_chip providers which have such a device node have been updated. * Some gpio_chip drivers also needed to update their module "owner" field ... for which missing kerneldoc was added. * Some gpio_chips don't support input GPIOs. Those GPIOs are now flagged appropriately when the chip is registered. Based on previous patches, and discussion both on and off LKML. A Documentation/ABI/testing/sysfs-gpio update is ready to submit once this merges to mainline. [akpm@linux-foundation.org: a few maintenance build fixes] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25mfd: sm501 fix gpio number calculation for upper bankBen Dooks1-1/+3
The sm501_gpio_pin2nr() routine returns the wrong values for gpios in the upper bank. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25mfd: sm501 build fixes when CONFIG_MFD_SM501_GPIO unsetBen Dooks1-5/+24
Fix the build problems if CONFIG_MFD_SM501_GPIO is not set, which is generally when there is no gpiolib support available as currently happens on x86 when building PCI SM501. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Tested-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: fixes for akpms comments on gpiolib additionBen Dooks1-8/+16
Fixup the comments from the patch that added the gpiolib support from Andrew Morton. These include spotting some missing frees on error or release, and changing a memcpy for a type-safe assingment. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: gpio I2C supportBen Dooks1-1/+75
Add support for adding the GPIO based I2C resources. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <apatard@mandriva.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: gpio dynamic registration for PCI devicesArnaud Patard1-2/+4
The SM501 PCI card requires a dyanmic gpio allocation as the number of cards is not known at compile time. Fixup the platform data and registration to deal with this. Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Arnaud Patard <apatard@mandriva.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: add gpiolib supportBen Dooks2-52/+255
Add support for exporting the GPIOs on the SM501 via gpiolib. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <apatard@mandriva.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: add power control callbackBen Dooks1-0/+31
Add callback to get or set the power control if the device has the sleep connected to some form of GPIO. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25mfd: fix platform driver hotplug/coldplugKay Sievers3-0/+6
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the MFD platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: one was missing] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25mfd: don't use memzeroAndrew Morton1-1/+1
For it doesn't exist on i386. Cc: Ian Molton <spyro@f2s.com> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds4-0/+729
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits) [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) [ARM] pxa: add base support for PXA930 (aka Tavor-P) [ARM] Update mach-types [ARM] pxa: make littleton to use the new smc91x platform data [ARM] pxa: make zylonite to use the new smc91x platform data [ARM] pxa: make mainstone to use the new smc91x platform data [ARM] pxa: make lubbock to use new smc91x platform data [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable [NET] smc91x: add SMC91X_NOWAIT flag to platform data [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_* [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata" [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper Support for LCD on e740 e750 e400 and e800 e-series PDAs E-series UDC support PXA UDC - allow use of inverted GPIO for pullup Add e350 support Fix broken e-series build E-series GPIO / IRQ definitions. ...
2008-07-20mfd: let asic3 use mem resource instead of bus_shiftPhilipp Zabel1-6/+5
The bus_shift parameter in platform_data is not needed as we can tell the driver with the IOMEM_RESOURCE whether the ASIC is located on a 16bit or 32bit memory bus. The htc-egpio driver uses a more descriptive bus_width parameter, but for drivers where the register map size fixed, we don't even need this. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-20mfd: fix the asic3 irq demux codePhilipp Zabel1-1/+1
Wrong irq numbers were given to desc->handle_irq, which on some devices caused endless loops (asic3_irq_demux calling itself, basically). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-20mfd: asic3 should depend on gpiolibSamuel Ortiz1-1/+1
Now that asic3 implements the gpiolib API, it should depend on it at build time. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-20mfd: fix asic3 config array initialisationPhilipp Zabel1-3/+3
Our memset length was incorrect. Tested-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-20mfd: move asic3 probe functions into __init sectionPhilipp Zabel1-6/+5
Potentially free some memory by moving the _probe functions into __init. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-20mfd: Use uppercase only for asic3 macros and definesSamuel Ortiz1-44/+44
Let's be consistent and use uppercase only, for both macro and defines. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-20mfd: use dev_* macros for asic3 debuggingSamuel Ortiz1-14/+13
We replace the various printks, and use the dev_* macros instead. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-20mfd: New asic3 gpio configuration codeSamuel Ortiz1-56/+43
The ASIC3 GPIO configuration code is a bit obscure and hardly readable. This patch changes it so that it is now more readable and understandable, by being more explicit. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-20mfd: asic3 children platform data removalSamuel Ortiz1-8/+0
Platform devices should be dynamically allocated, and each supported device should have its own platform data. For now we just remove this buggy code. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-20mfd: asic3 gpiolib supportSamuel Ortiz1-71/+153
ASIC3 is, among other things, a GPIO extender. We should thus have it supporting the current gpiolib API. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-12Merge branch 'pxa-tosa' into pxaRussell King4-0/+729
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/tosa.c arch/arm/mach-pxa/spitz.c
2008-07-07[ARM] 5128/1: tc6393xb: tmio-nand supportDmitry Baryshkov2-0/+64
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5127/1: Core MFD supportDmitry Baryshkov3-0/+120
This patch provides a common subdevice registration system for MFD type chips, using platfrom device. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5096/2: Support Toshiba TC6393XB Mobile I/O Controller.Dmitry Baryshkov3-0/+545
Add support for Toshiba TC6393XB companion chip. Currently only GPIO and part of IRQ features of the device are supported. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-21HTC_EGPIO is ARM-onlyAl Viro1-1/+1
driver uses symbols defined only on ARM Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30drivers: replace remaining __FUNCTION__ occurrencesHarvey Harrison2-5/+5
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-4/+5
* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits) [ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed [ARM] am79c961a: platform_get_irq() may return signed unnoticed [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page() [ARM] Feroceon: fix function alignment in proc-feroceon.S [ARM] Orion: catch a couple more alternative spellings of PCIe [ARM] Orion: fix orion-ehci platform resource end addresses [ARM] Orion: fix ->map_irq() PCIe bus number check [ARM] Orion: fix ioremap() optimization [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check kprobes/arm: fix decoding of arithmetic immediate instructions kprobes/arm: fix cache flush address for instruction stub [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2 [ARM] 5021/1: at91: buildfix for sam9263 + PM [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263 [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake() [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info [ARM] 5014/1: Cleanup reset state before entering suspend or resetting. ...
2008-04-29Merge branches 'pxa' and 'orion-fixes1'Russell King1-4/+5
2008-04-28mfd: use shorter set_current_state()Robert P. J. Day1-4/+3
Since this routine declares a separate "tsk" pointer for no other reason than to call set_task_state(), get rid of it and just invoke set_current_state(). Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28sm501: add uart supportMagnus Damm1-16/+68
This patch extends the sm501 mfd with 8250 uart support. We're currently doing this in the board specific r2d-1 code already, but it would be nice to do move things into the mfd since it's more chip specific than board specific. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 01:50:20 +0000