summaryrefslogtreecommitdiff
path: root/drivers/media/dvb/b2c2/flexcop-pci.c
AgeCommit message (Collapse)AuthorFilesLines
2012-08-13[media] Rename media/dvb as media/pciMauro Carvalho Chehab1-450/+0
The remaining dvb drivers are pci, so rename them to match the bus. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] use pci_dev->revisionBjørn Mork1-3/+1
pci_setup_device() has saved the PCI revision in the pci_dev struct since Linux 2.6.23. Use it. Cc: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-27Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (42 commits) [media] media: vb2: correct queue initialization order [media] media: vb2: fix incorrect v4l2_buffer->flags handling [media] s5p-fimc: Add support for the buffer timestamps and sequence [media] s5p-fimc: Fix bytesperline and plane payload setup [media] s5p-fimc: Do not allow changing format after REQBUFS [media] s5p-fimc: Fix FIMC3 pixel limits on Exynos4 [media] tda18271: update tda18271c2_rf_cal as per NXP's rev.04 datasheet [media] tda18271: update tda18271_rf_band as per NXP's rev.04 datasheet [media] tda18271: fix bad calculation of main post divider byte [media] tda18271: prog_cal and prog_tab variables should be s32, not u8 [media] tda18271: fix calculation bug in tda18271_rf_tracking_filters_init [media] omap3isp: queue: Don't corrupt buf->npages when get_user_pages() fails [media] v4l: Don't register media entities for subdev device nodes [media] omap3isp: Don't increment node entity use count when poweron fails [media] omap3isp: lane shifter support [media] omap3isp: ccdc: support Y10/12, 8-bit bayer fmts [media] media: add missing 8-bit bayer formats and Y12 [media] v4l: add V4L2_PIX_FMT_Y12 format cx23885: Fix stv0367 Kconfig dependency [media] omap3isp: Use isp xclk defines ... Fix up trivial conflict (spelink errurs) in drivers/media/video/omap3isp/isp.c
2011-04-04[media] FLEXCOP-PCI: fix __xlate_proc_name-warning for flexcop-pciPatrick Boettcher1-1/+1
This patch fixes the warning about bad names for sys-fs and other kernel-things. The flexcop-pci driver was using '/'-characters in it, which is not good. This has been fixed in several attempts by several people, but obviously never made it into the kernel. Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Cc: Steffen Barszus <steffenbpunkt@googlemail.com> Cc: Boris Cuber <me@boris64.net> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2009-03-30V4L/DVB (11288): Code cleanup (passes checkpatch now) of the ↵Uwe Bugla1-82/+82
b2c2-flexcop-drivers 2/2 This is the second part of the code cleanup changing the usb and pci-driver cores. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10948): flexcop-pci: Print a message in case the new stream ↵Matthias Schwarzott1-0/+1
watchdog detects a problem Print a message in case the new software IRQ watchdog detects a problem. I choose the info message category, this can be changed if not appropriate. Cc: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cardsPatrick Boettcher1-23/+42
With (some) Technisat cards you cannot run multiple DVB applications in parallel and switch the channel at the same time. There seems to be a problem on the interfaces or even inside the flexcop-device that can't handle interruption on the streaming interface. This patch adds a watchdog to check whether data is supposed to come in (streaming PIDs are requested) and if no data is seen within 400ms (default) it resets the streaming/pid-filtering hardware. This patch is urgently needed to support the rev 2.8 of the hardware and solves problem occassionally seen on older hardware. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-04-24V4L/DVB (7094): static memoryDouglas Schilling Landgraf1-1/+1
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5505): Fix Kernel Bugzilla #8301: spinlock fix for flexcop-pciHendrik Borghorst1-4/+5
If you modprobe the b2c2-flexcop-pci module you got a hardlock of your system. This is due the usage of spin_lock before spin_lock_init is called. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-22WorkStruct: make allyesconfigDavid Howells1-4/+5
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells1-1/+1
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-07-02[PATCH] irq-flags: media: Use the new IRQF_ constantsThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25V4L/DVB (4014): Remove the spagetti code gotos that aren't usefulTrent Piepho1-12/+7
Some code had pointless gotos that just didn't make any sense. They didn't make the code smaller, or faster, or easier to understand. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3433): Fix printk type warningRandy Dunlap1-2/+4
- Fix printk type warning: drivers/media/dvb/b2c2/flexcop-pci.c:164: warning: format '%08x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2005-07-07[PATCH] dvb: usb/pci: correct syntax of driver name fieldsPatrick Boettcher1-1/+1
Change the name-field of the pci_driver and usb_driver structs to the name of the module after compilation. It seems that this field is used in some places where special characters are not allowed. Thanks to Alan Halverson for finding this problem. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] dvb: flexcop: woraround irq stop problemPatrick Boettcher1-35/+87
The flexcop chip often stops generating interrupts after some hours of operation. Apparently this can be fixed by resetting register block 0x300 at each channel change (this is not detailed in the flexcop data books). This patch also restructures DMA handling and adds a bit of debug code for the irq problem in case it still happens for someone. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: flexcop: fix module refcount handlingJohannes Stezenbach1-0/+1
Corrected the THIS_MODULE handling for the flexcop-stuff and dvb-usb which lead to oopses because of misorganized module dependencies. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: flexcop: use hw pid filterJohannes Stezenbach1-12/+16
- enabled the HW PID by default for the PCI cards - correct the TS demux parsing when PID filter is enabled (and thus the timer IRQ) - rewrote the PID-filter and FULLTS control part in flexcop-hw-filter (thanks to Krzysztof Matula for pointing that out) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: flexcop: fixed interrupt-sharingJohannes Stezenbach1-2/+13
fixed interrupt-sharing and added a spinlock to the irq-callback (thanks to Pascal Riekenberg) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: b2c2/flexcop driver refactoring part 2: add modular Flexcop driverJohannes Stezenbach1-0/+365
b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add modular Flexcop driver Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 12:02:54 +0000