summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "You will get the following new drivers: - Qualcomm PM8941 power key drver - ChipOne icn8318 touchscreen controller driver - Broadcom iProc touchscreen and keypad drivers - Semtech SX8654 I2C touchscreen controller driver ALPS driver now supports newer SS4 devices; Elantech got a fix that should make it work on some ASUS laptops; and a slew of other enhancements and random fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: alps - non interleaved V2 dualpoint has separate stick button bits Input: alps - fix touchpad buttons getting stuck when used with trackpoint Input: atkbd - document "no new force-release quirks" policy Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static Input: ALPS - V7 devices can report 5-finger taps Input: ALPS - add support for SS4 touchpad devices Input: ALPS - refactor alps_set_abs_params_mt() Input: elantech - fix absolute mode setting on some ASUS laptops Input: atmel_mxt_ts - split out touchpad initialisation logic Input: atmel_mxt_ts - implement support for T100 touch object Input: cros_ec_keyb - fix clearing keyboard state on wakeup Input: gscps2 - drop pci_ids dependency Input: synaptics - allocate 3 slots to keep stability in image sensors Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots"" Input: MT - make slot assignment work for overcovered solutions mfd: tc3589x: enforce device-tree only mode Input: tc3589x - localize platform data Input: tsc2007 - Convert msecs to jiffies only once Input: edt-ft5x06 - remove EV_SYN event report Input: edt-ft5x06 - allow to setting the maximum axes value through the DT ...
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds27-667/+2740
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - quite a few firmware fixes for RMI driver by Andrew Duggan - huion and uclogic drivers have been substantially overlaping in functionality laterly. This redundancy is fixed by hid-huion driver being merged into hid-uclogic; work done by Benjamin Tissoires and Nikolai Kondrashov - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg - Some of the quirks, that got separated into individual drivers, have historically had EXPERT dependency. As HID subsystem matured (as well as the individual drivers), this made less and less sense. This dependency is now being removed by patch from Jean Delvare - Logitech lg4ff driver received a couple of improvements for mode switching, by Michal Malý - multitouch driver now supports clickpads, patches by Benjamin Tissoires and Seth Forshee - hid-sensor framework received a substantial update; namely support for Custom and Generic pages is being added; work done by Srinivas Pandruvada - wacom driver received substantial update; it now supports i2c-conntected devices (Mika Westerberg), Bamboo PADs are now properly supported (Benjamin Tissoires), much improved battery reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng) - small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) HID: sensor: Update document for custom sensor HID: sensor: Custom and Generic sensor support HID: debug: fix error handling in hid_debug_events_read() Input - mt: Fix input_mt_get_slot_by_key HID: logitech-hidpp: fix error return code HID: wacom: Add support for Cintiq 13HD Touch HID: logitech-hidpp: add a module parameter to keep firmware gestures HID: usbhid: yet another mouse with ALWAYS_POLL HID: usbhid: more mice with ALWAYS_POLL HID: wacom: set stylus_in_proximity before checking touch_down HID: wacom: use wacom_wac_finger_count_touches to set touch_down HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT HID: pidff: effect can't be NULL HID: add quirk for PIXART OEM mouse used by HP HID: add HP OEM mouse to quirk ALWAYS_POLL HID: wacom: ask for a in-prox report when it was missed HID: hid-sensor-hub: Fix sparse warning HID: hid-sensor-hub: fix attribute read for logical usage id HID: plantronics: fix Kconfig default HID: pidff: support more than one concurrent effect ...
2015-04-13Merge tag 'for-v4.1' of git://git.infradead.org/battery-2.6Linus Torvalds6-97/+121
Pull power supply and reset changes from Sebastian Reichel: - new API for safe access of power supply function attrs - devres support for power supply (un)registration - new drivers / chips: - generic syscon based poweroff driver - iio & charger driver for da9150 - fuel gauge driver for axp288 - bq27x00: add support for bq27510 - bq2415x: add support for bq24157s - twl4030-madc-battery: convert to iio consumer - misc fixes * tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits) power: twl4030_madc_battery: Add missing MODULE_ALIAS power: twl4030-madc-battery: Convert to iio consumer. dt: power: Add docs for generic SYSCON poweroff driver. power: reset: Add generic SYSCON register mapped poweroff. power: max17042_battery: add missed blank power: max17042_battery: Use reg type instead of chip type power/reset: at91: big endian fixes for atsama5d3x power_supply: charger-manager: Fix dereferencing of ERR_PTR HID: input: Fix NULL pointer dereference when power_supply_register fails power: constify of_device_id array power/reset/rmobile-reset.c: Fix !HAS_IOMEM build power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable arm: mach-pxa: Decrement the power supply's device reference counter mfd: ab8500: Decrement the power supply's device reference counter power_supply: bq2415x_charger: Decrement the power supply's device reference counter power_supply: 88pm860x_charger: Decrement the power supply's device reference counter x86/olpc/xo15/sci: Use newly added power_supply_put API x86/olpc/xo1/sci: Use newly added power_supply_put API power_supply: charger-manager: Decrement the power supply's device reference counter power_supply: Increment power supply use counter when obtaining references ...
2015-04-13Merge branch 'for-4.1/sensor-hub' into for-linusJiri Kosina4-74/+989
Conflicts: drivers/iio/common/hid-sensors/hid-sensor-trigger.c include/linux/hid-sensor-hub.h
2015-04-13Merge branches 'for-4.0/upstream-fixes', 'for-4.1/genius', ↵Jiri Kosina25-593/+1735
'for-4.1/huion-uclogic-merge', 'for-4.1/i2c-hid', 'for-4.1/kconfig-drop-expert-dependency', 'for-4.1/logitech', 'for-4.1/multitouch', 'for-4.1/rmi', 'for-4.1/sony', 'for-4.1/upstream' and 'for-4.1/wacom' into for-linus
2015-04-10HID: sensor: Custom and Generic sensor supportSrinivas Pandruvada3-0/+865
HID Sensor Spec defines two usage ids for custom sensors HID_USAGE_SENSOR_TYPE_OTHER_CUSTOM (0x09, 0xE1) HID_USAGE_SENSOR_TYPE_OTHER_GENERIC(0x09, 0xE2) In addition the standard also defines usage ids for custom fields. The purpose of these sensors is to extend the functionality or provide a way to obfuscate the data being communicated by a sensor. Without knowing the mapping between the data and its encapsulated form, it is difficult for an driver to determine what data is being communicated by the sensor. This allows some differentiating use cases, where vendor can provide applications. Since these can't be represented by standard sensor interfaces like IIO, we present these as fields with - type (input/output) - units - min/max - get/set value In addition an dev interface to transfer report events. Details about this interface is described in /Documentation/hid/hid-sensor.txt. Manufacturers should not use these ids for any standard sensors, otherwise the the product/vendor id can be added to black list. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-10HID: debug: fix error handling in hid_debug_events_read()Jiri Kosina1-1/+2
In the unlikely case of hdev vanishing while hid_debug_events_read() was sleeping, we can't really break out of the case switch as with other cases, as on the way out we'll try to remove ourselves from the hdev waitqueue. Fix this by taking a shortcut exit path and avoiding cleanup that doesn't make sense in case hdev doesn't exist any more anyway. Reported-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-05HID: logitech-hidpp: fix error return codeJulia Lawall1-0/+1
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02HID: wacom: Add support for Cintiq 13HD TouchPing Cheng1-0/+11
Cintiq 13HD Touch is a new display tablet with pen and 10 finger touches. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02HID: logitech-hidpp: add a module parameter to keep firmware gesturesBenjamin Tissoires1-0/+10
The Logitech T650 used to report 3 fingers swipes to the up as a press on the Super key. When we switched the touchpad to the raw mode, we also disable such firmware gesture and some users may rely on it. Unfortunately, 3 finger swipes are still not supported in most of the Linux environments, which means that we disabled a feature of the touchpad. Allow users to revert the raw reporting mode and keep going with the firmware gestures by providing a new module parameter. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02HID: usbhid: yet another mouse with ALWAYS_POLLOliver Neukum2-2/+4
The device exists with two device IDs instead of one as previously believed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02HID: usbhid: more mice with ALWAYS_POLLOliver Neukum2-0/+8
During a stress test these mice kept dropping and reappearing in runlevel 1 as opposed to 5. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02HID: wacom: set stylus_in_proximity before checking touch_downPing Cheng1-18/+16
In wacom_bpt_pen, we checked touch_down before assigning new stylus_in_proximity value. This would cause stylus_in_proximity not updated properly if touch is down before pen is in proximity. [jkosina@suse.cz: fix if-else style] Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02HID: wacom: use wacom_wac_finger_count_touches to set touch_downPing Cheng1-51/+33
Counting number of touching fingers by wacom_wac_finger_count_touches so we don't have to count them inside individual routines. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUTPing Cheng3-32/+19
The quirk was added for devices that support both pen and touch. It decides if a device supports multiple inputs by hardcoded feature type. However, for some devices, we do not know if they support both before accessing their HID descriptors. This patch relies on dynamically assigned device_type to make the decision. Also, we make it certain that wacom_wac->shared is always created. That is, the driver will not be loaded if it fails to create wacom_wac->shared. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02Merge branch 'for-4.0/upstream-fixes' into for-4.1/wacomJiri Kosina10-43/+92
Conflicts: drivers/hid/wacom_wac.c Need to fetch the 4.0 fixes to apply 4.1 patches based on top of those. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-27HID: pidff: effect can't be NULLJiri Kosina1-1/+1
Force-beedback core guarantees that the 'effect' pointer that's being passed to ->upload() callback is non-NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-25HID: add quirk for PIXART OEM mouse used by HPOliver Neukum2-0/+2
This mouse is also known under other IDs. It needs the quirk or will disconnect in runlevel 1 or 3. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-25HID: add HP OEM mouse to quirk ALWAYS_POLLOliver Neukum2-0/+4
This mouse needs QUIRK_ALWAYS_POLL. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-24HID: input: Fix NULL pointer dereference when power_supply_register failsKrzysztof Kozlowski1-2/+2
Do not call power_supply_powers() if power_supply_register() failed earlier. This fixes possible NULL pointer dereference by power_supply_powers() in such case. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-23Merge tag 'v4.0-rc5' into nextDmitry Torokhov23-261/+715
Merge with the latest upstream to synchronize Synaptics changes and bring in new infrastructure pieces. Conflicts: drivers/input/mouse/synaptics.c
2015-03-17HID: wacom: check for wacom->shared before following the pointerBenjamin Tissoires1-3/+4
486b908 (HID: wacom: do not send pen events before touch is up/forced out) introduces a kernel oops when plugging a tablet without touch. wacom->shared is null for these devices so this leads to a null pointer exception. Change the condition to make it clear that what we need is wacom->shared not NULL. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: wacom: ask for a in-prox report when it was missedBenjamin Tissoires2-1/+20
If noone listens to the input device when a tool comes in proximity, the tablet does not send the in-prox event when a client becomes available. That means that no events will be sent until the tool is taken out of proximity. In this situation, ask for the report WACOM_REPORT_INTUOSREAD which will read the corresponding feature and generate an in-prox event. To make some generation of hardware working, we need to unset the quirk NO_GET set by hid-core because the interfaces are seen as "boot mouse". We don't schedule this read in a worker while we are in an IO interrupt. We know that usbhid will do it asynchronously. If this is triggered by uhid, then this is obviously a client side bug :) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: hid-sensor-hub: Fix sparse warningSrinivas Pandruvada1-2/+2
Since I can't change the type of hid_set_field argument 3, using __force __s32 to remove this warning. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: hid-sensor-hub: fix attribute read for logical usage idSrinivas Pandruvada1-2/+4
For defining enumeration values like report or power status events, the enumeration usage ids are enclosed in a logical collection. In this case we need to match logical usage id for pending read on this usage id. For example, in the below field, when read is requested for 0319, the report will contain one of the status usages like 850, 851 etc. In this case the raw event will not match 0319. So when logical collection matches, then wake up the pending thread. Physical(Sensor.OtherCustom) Logical(Sensor.0319) Application(Sensor.Sensor) Usage(6) Sensor.0850 Sensor.0851 Sensor.0852 Sensor.0853 Sensor.0854 Sensor.0855 Logical Minimum(1) Logical Maximum(5) Report Size(8) Report Count(1) Report Offset(24) Flags( Array Absolute ) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: plantronics: fix Kconfig defaultStefan Richter1-1/+0
This driver didn't exist until before v3.19. Why would suddenly everybody want to build it? Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: pidff: support more than one concurrent effectJim Keir1-0/+6
The PID driver (usbhid/hid-pidff.c) does not set the effect ID when uploading an effect. The result is that the initial upload works but subsequent uploads to modify effect parameters are all directed at the last-created effect. The targeted effect ID must be passed back to the device when effect parameters are changed. This is done at the start of "pidff_set_condition_report", "pidff_set_periodic_report" etc. based on the value of "pidff->block_load[PID_EFFECT_ BLOCK_INDEX].value[0]". This value is only ever set during pidff_request_effect_upload. The result is stored in "pidff->pid_id[effect->id]" at the end of pid_upload_effect, for later use. However, if an effect is modified and re-sent then this identifier is not being copied back from pidff->pid_id[effect->id] before sending the command to the device. The fix is to do this at the start of pidff_upload_effect. Signed-off-by: Jim Keir <jimkeir@oracledbadirect.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: Stop hiding options with !EXPERTJean Delvare1-11/+11
Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: uclogic: make input_mapping independent of usbBenjamin Tissoires1-9/+8
No need to retrieve the USB handle in input_mapping() when we already do that in probe. It also allows to use the quirk without having to add the product ID matching. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-15HID: tivo: enable all buttons on the TiVo Slide Pro remoteForest Wilkinson3-0/+3
The linux kernel has supported the TiVo Slide remote control for some time, but does not recognize the USB ID of the newer Slide Pro. This patch adds the missing data structures so the newer remote will be recognized by the driver, thereby allowing the TiVo, LiveTV, and Thumbs Up/Down buttons to be mapped with a hwdb file. Signed-off-by: Forest Wilkinson <web11.forest@tibit.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-13power_supply: Change ownership from driver to coreKrzysztof Kozlowski6-97/+120
Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c) [ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48) [ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28) [ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484) [ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c) [ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100) [ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c) [ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for compal-laptop.c] Acked-by: Darren Hart <dvhart@linux.intel.com> [for the mfd part] Acked-by: Lee Jones <lee.jones@linaro.org> [for the hid part] Acked-by: Jiri Kosina <jkosina@suse.cz> [for the acpi part] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-13power_supply: Move run-time configuration to separate structureKrzysztof Kozlowski4-5/+6
Add new structure 'power_supply_config' for holding run-time initialization data like of_node, supplies and private driver data. The power_supply_register() function is changed so all power supply drivers need updating. When registering the power supply this new 'power_supply_config' should be used instead of directly initializing 'struct power_supply'. This allows changing the ownership of power_supply structure from driver to the power supply core in next patches. When a driver does not use of_node or supplies then it should use NULL as config. If driver uses of_node or supplies then it should allocate config on stack and initialize it with proper values. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for drivers/platform/x86/compal-laptop.c] Reviewed-by: Darren Hart <dvhart@linux.intel.com> [for drivers/hid/*] Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-12HID: multitouch: Add support for button type usageSeth Forshee2-0/+17
According to [1], Windows Precision Touchpad devices must supply a button type usage in the device capabilities feature report. A value of 0 indicates that the device contains a depressible button (i.e. it's a click-pad) whereas a value of 1 indicates a non-depressible button. Add support for this usage and set INPUT_PROP_BUTTONPAD on the touchpad input device whenever a depressible button is present. [1] https://msdn.microsoft.com/en-us/library/windows/hardware/dn467314(v=vs.85).aspx Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: wacom: Add battery presence indicator to wireless tabletsJason Gerecke3-6/+15
Declare the POWER_SUPPLY_PROP_PRESENT property to provide userspace with a way to determine if the battery on a wireless tablet is plugged in. Although current wireless tablets do not explicitly report this information, it can be inferred from other state information. In particular, a battery is assumed to be present if any of the following are true: a non-zero battery level reported, the battery is reported as charging, or the tablet is operating wirelessly. Note: The last condition above may not strictly hold for the Graphire Wireless (it charges from a DC barrel jack instead of a USB port), but I do not know what is reported in the no-battery condition. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: add ALWAYS_POLL quirk for a Logitech 0xc007oliver@neukum.org2-0/+2
This device disconnects every 60s without X Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: wacom: drop WACOM_PKGLEN_STATUSJiri Kosina1-1/+0
The constant is not used (leftover from previous patch versions that never got merged). Reported-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: wacom: Status packet provides 'charging', not 'powered' bitJason Gerecke2-9/+7
The status packet for tablets which can use a wireless module contains a bit that is set if the battery is charging. This bit will be 0 if either a battery is not present or if the battery has reached full charge. Note that the charging circuit may continue to charge the battery for a short time after reaching "100%". Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: wacom: Report battery status for Intuos Pro and Intuos5Jason Gerecke1-0/+2
Calls the wacom_status_irq function to report battery status for the Intuos Pro and Intuos5 (in addition to the already-reporting Intuos and last-generation Bamboo). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: wacom: Provide battery charge state to system over USB if availableJason Gerecke1-0/+25
If a wireless adapter (which contains the charging circuitry) is detected as being attached to the tablet then create a new battery interface and update its status as data is reported. Also destroy the battery if the adapter goes away. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: wacom: Allow dynamic battery creation/destructionJason Gerecke2-2/+16
Tablets like the Intuos, Intuos Pro, and Bamboo have a connector for an optional wireless module that can be connected on the fly. The presence (or absence) of this module is indicated in a status report recieved from the tablet. This patch adds a workqueue function that will create or destroy a power_supply object at runtime to match the current state of the WACOM_QUIRK_BATTERY flag. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: wacom: Centralize updating of wacom_wac battery statusJason Gerecke2-35/+29
Has the 'wacom_notify_battery' function take on the job of detecting if updating the power supply is necessary to remove multiple nearly-identical 'if' blocks. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: wacom: Move handling of Intuos status packets to seperate functionJason Gerecke2-13/+24
In addition to the touchswitch state for "Intuos", these packets are also sent by the Intuos Pro, Intuos5, and last-generation Bamboo tablets when using a wired connection. They contain, among other things, information about the optional wireless module and battery charge state (to be supported in subsuquent patches). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-06Input: use more descriptive KEY_ROTATE_DISPLAY instead of KEY_DIRECTIONStefan Brüns1-1/+1
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-06HID: multitouch: add support of clickpadsBenjamin Tissoires1-0/+9
Touchpads that have only one button are called clickpads and should be advertised as such by the kernel. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-04HID: map telephony usage pageDmitry Torokhov1-0/+23
Currently HID code maps usages from telephony page into BTN_0, BTN_1, etc keys which get interpreted by mousedev and userspace as left/right/middle button clicks, which is not really helpful. This change adds mappings for usages that have corresponding input event definitions, and leaves the rest unmapped. This can be changed when there are userspace consumers for more telephony usages. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-04HID: Kconfig: add USB_HID dependency to UC-LOGICBenjamin Tissoires1-1/+1
In commit 08177f4 (HID: uclogic: merge hid-huion driver in hid-uclogic) HID_HUION depends explicitely on USB_HID because it contained quite some USB-isms. Now that hid-uclogic is the new home of Huion tablets, we need to also add the dependency on USB_HID to this driver. Reported-by: Jiri Kosina <jkosina@suse.cz> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-03HID: uclogic: actually invert the in-range bit for huion tablets onlyBenjamin Tissoires1-5/+8
This hack is only needed for Huion tablets. It does not seem to have any effect on the other tablets handled by this device right now, but it's better to check for the product id sooner than discovering that we have messed up one tablet later. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-03HID: uclogic: discard the extra Pen input node on Huion tabletsBenjamin Tissoires1-0/+20
Some Huion tablets present 2 HID Pen interfaces. Only one is used, so we can drop the unused one. Reviewed-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-03HID: uclogic: apply quirk NO_EMPTY_INPUTBenjamin Tissoires1-0/+1
NO_EMPTY_INPUT is useful when MULTI_INPUT is set. It prevents to create empty input nodes that user space does not know what to do with. It does not seem to be required at the moment, this is just a preventive patch. This check is only made during the plug of the device, so it does not hurt to have it. Reviewed-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-03HID: uclogic: name the input nodes based on their toolBenjamin Tissoires1-0/+46
We append "Pen", "Pad", "Mouse", "Keyboard", "Consumer Control" or "System Control" suffix to the appropriate input node to match what the Wacom driver does and be more convenient for the user to know which one is which. Reviewed-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 15:05:17 +0000