summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2016-04-30gpiolib-acpi: Duplicate con_id string when adding it to the crs lookup listVille Syrjälä1-1/+1
Calling gpiod_get() from a module and then unloading the module leads to an oops due to acpi_can_fallback_to_crs() storing the pointer to the passed 'con_id' string onto acpi_crs_lookup_list. The next guy to come along will then try to access the string but the memory may now be gone with the module. Make a copy of the passed string instead, and store the copy on the list. BUG: unable to handle kernel paging request at ffffffffa03e7855 IP: [<ffffffff81338322>] strcmp+0x12/0x30 PGD 2a07067 PUD 2a08063 PMD 74720067 PTE 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: i915(+) drm_kms_helper drm intel_gtt snd_hda_codec snd_hda_core i2c_algo_bit syscopya rea sysfillrect sysimgblt fb_sys_fops agpgart snd_soc_sst_bytcr_rt5640 coretemp hwmon intel_rapl intel_soc_dts_thermal punit_atom_debug snd_soc_rt5640 snd_soc_rl6231 serio snd_intel_sst_acpi snd_intel_sst_core video snd_soc_sst_mfld_platf orm snd_soc_sst_match backlight int3402_thermal processor_thermal_device int3403_thermal int3400_thermal acpi_thermal_r el snd_soc_core intel_soc_dts_iosf int340x_thermal_zone snd_compress i2c_hid hid snd_pcm snd_timer snd soundcore evdev sch_fq_codel efivarfs ipv6 autofs4 [last unloaded: drm] CPU: 2 PID: 3064 Comm: modprobe Tainted: G U W 4.6.0-rc3-ffrd-ipvr+ #302 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8 _X64_R_2014_13_1_00 03/24/2014 task: ffff8800701cd200 ti: ffff880070034000 task.ti: ffff880070034000 RIP: 0010:[<ffffffff81338322>] [<ffffffff81338322>] strcmp+0x12/0x30 RSP: 0000:ffff880070037748 EFLAGS: 00010286 RAX: 0000000080000000 RBX: ffff88007a342800 RCX: 0000000000000006 RDX: 0000000000000006 RSI: ffffffffa054f856 RDI: ffffffffa03e7856 RBP: ffff880070037748 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa054f855 R13: ffff88007281cae0 R14: 0000000000000010 R15: ffffffffffffffea FS: 00007faa51447700(0000) GS:ffff880079300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa03e7855 CR3: 0000000041eba000 CR4: 00000000001006e0 Stack: ffff880070037770 ffffffff8136ad28 ffffffffa054f855 0000000000000000 ffff88007a0a2098 ffff8800700377e8 ffffffff8136852e ffff88007a342800 00000007700377a0 ffff8800700377a0 ffffffff81412442 70672d6c656e6170 Call Trace: [<ffffffff8136ad28>] acpi_can_fallback_to_crs+0x88/0x100 [<ffffffff8136852e>] gpiod_get_index+0x25e/0x310 [<ffffffff81412442>] ? mipi_dsi_attach+0x22/0x30 [<ffffffff813685f2>] gpiod_get+0x12/0x20 [<ffffffffa04fcf41>] intel_dsi_init+0x421/0x480 [i915] [<ffffffffa04d3783>] intel_modeset_init+0x853/0x16b0 [i915] [<ffffffffa0504864>] ? intel_setup_gmbus+0x214/0x260 [i915] [<ffffffffa0510158>] i915_driver_load+0xdc8/0x19b0 [i915] [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffffa026b13b>] drm_dev_register+0xab/0xc0 [drm] [<ffffffffa026d7b3>] drm_get_pci_dev+0x93/0x1f0 [drm] [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffffa043f1f4>] i915_pci_probe+0x34/0x50 [i915] [<ffffffff81379751>] pci_device_probe+0x91/0x100 [<ffffffff8141a75a>] driver_probe_device+0x20a/0x2d0 [<ffffffff8141a8be>] __driver_attach+0x9e/0xb0 [<ffffffff8141a820>] ? driver_probe_device+0x2d0/0x2d0 [<ffffffff81418439>] bus_for_each_dev+0x69/0xa0 [<ffffffff8141a04e>] driver_attach+0x1e/0x20 [<ffffffff81419c20>] bus_add_driver+0x1c0/0x240 [<ffffffff8141b6d0>] driver_register+0x60/0xe0 [<ffffffff81377d20>] __pci_register_driver+0x60/0x70 [<ffffffffa026d9f4>] drm_pci_init+0xe4/0x110 [drm] [<ffffffff810ce04e>] ? trace_hardirqs_on+0xe/0x10 [<ffffffffa02f1000>] ? 0xffffffffa02f1000 [<ffffffffa02f1094>] i915_init+0x94/0x9b [i915] [<ffffffff810003bb>] do_one_initcall+0x8b/0x1c0 [<ffffffff810eb616>] ? rcu_read_lock_sched_held+0x86/0x90 [<ffffffff811de6d6>] ? kmem_cache_alloc_trace+0x1f6/0x270 [<ffffffff81183826>] do_init_module+0x60/0x1dc [<ffffffff81115a8d>] load_module+0x1d0d/0x2390 [<ffffffff811120b0>] ? __symbol_put+0x70/0x70 [<ffffffff811f41b2>] ? kernel_read_file+0x92/0x120 [<ffffffff811162f4>] SYSC_finit_module+0xa4/0xb0 [<ffffffff8111631e>] SyS_finit_module+0xe/0x10 [<ffffffff81001ff3>] do_syscall_64+0x63/0x350 [<ffffffff816103da>] entry_SYSCALL64_slow_path+0x25/0x25 Code: f7 48 8d 76 01 48 8d 52 01 0f b6 4e ff 84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0 74 18 48 8d 7f 01 48 8d 76 01 <0f> b6 47 ff 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31 c0 5d c3 66 RIP [<ffffffff81338322>] strcmp+0x12/0x30 RSP <ffff880070037748> CR2: ffffffffa03e7855 v2: Make the copied con_id const Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: stable@vger.kernel.org Fixes: 10cf4899f8af ("gpiolib: tighten up ACPI legacy gpio lookups") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-12Revert "gpio: rcar: Fine-grained Runtime PM support"Linus Walleij1-17/+6
This reverts commit 65194cb174b873448b208eb6e04ecb72237af76e.
2016-04-12Revert "gpio: rcar: Add Runtime PM handling for interrupts"Linus Walleij1-42/+0
This reverts commit b26a719bdba9aa926ceaadecc66e07623d2b8a53.
2016-04-08gpio: pca953x: Use correct u16 value for register word writeYong Li1-1/+2
The current implementation only uses the first byte in val, the second byte is always 0. Change it to use cpu_to_le16 to write the two bytes into the register Cc: stable@vger.kernel.org Signed-off-by: Yong Li <sdliyong@gmail.com> Reviewed-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08gpiolib: Defer gpio device setup until after gpiolib initializationGuenter Roeck1-31/+67
Since commit ff2b13592299 ("gpio: make the gpiochip a real device"), attempts to add a gpio chip prior to gpiolib initialization cause the system to crash. This happens because gpio_bus_type has not been registered yet. Defer creating gpio devices until after gpiolib has been initialized to fix the problem. Cc: Greg Ungerer <gerg@uclinux.org> Cc: Alexandre Courbot <gnurou@gmail.com> Fixes: ff2b13592299 ("gpio: make the gpiochip a real device") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08gpiolib: Do not use devm functions when registering gpio chipGuenter Roeck1-7/+12
It is possible that a gpio chip is registered before the gpiolib initialization code has run. This means we can not use devm_ functions to allocate memory at that time. Do it the old fashioned way. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08gpio: pxa: fix legacy non pinctrl aware buildsRobert Jarzmik1-2/+2
In legacy pxa builds, ie. non device-tree and platform-data only builds, pinctrl is not yet available. As a consequence, the pinctrl gpio direction change function is a stub, returning always success. In the current state, the gpio driver direction function believes the pinctrl direction change was successful, and exits without actually changing the gpio direction. This patch changes the logic : - if the pinctrl direction function fails, gpio direction will report that failure - if the pinctrl direction function succeeds, gpio direction is changed by the gpio driver anyway. This is sub optimal in the pinctrl aware case, as the gpio direction will be changed twice: once by pinctrl function and another time by the gpio direction function. Yet it should be acceptable in this form, as this is functional for all pxa platforms (device-tree and platform-data), and moreover changing a gpio direction is very very seldom, usually in machine initialization, seldom in drivers probe, and an exception for ac97 reset bug. Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request") Reported-by: Guenter Roeck <guenter@roeck-us.net> Tested-by: Guenter Roeck <guenter@roeck-us.net> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08gpio / ACPI: ignore GpioInt() GPIOs when requesting GPIO_OUT_*Dmitry Torokhov1-4/+12
When firmware does not use _DSD properties that allow properly name GPIO resources, the kernel falls back on parsing _CRS resources, and will return entries described as GpioInt() as general purpose GPIOs even though they are meant to be used simply as interrupt sources for the device: Device (ETSA) { Name (_HID, "ELAN0001") ... Method(_CRS, 0x0, NotSerialized) { Name(BUF0,ResourceTemplate () { I2CSerialBus( 0x10, /* SlaveAddress */ ControllerInitiated, /* SlaveMode */ 400000, /* ConnectionSpeed */ AddressingMode7Bit, /* AddressingMode */ "\\_SB.I2C1", /* ResourceSource */ ) GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullNone,, "\\_SB.GPSW") { BOARD_TOUCH_GPIO_INDEX } } ) Return (BUF0) } ... } This gives troubles with drivers such as Elan Touchscreen driver (elants_i2c) that uses devm_gpiod_get to look up "reset" GPIO line and decide whether the driver is responsible for powering up and resetting the device, or firmware is. In the above case the lookup succeeds, we map GPIO as output and later fail to request client->irq interrupt that is mapped to the same GPIO. Let's ignore resources described as GpioInt() while parsing _CRS when requesting output GPIOs (but allow them when requesting GPIOD_ASIS or GPIOD_IN as some drivers, such as i2c-hid, do request GPIO as input and then map it to interrupt with gpiod_to_irq). Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30gpio: xgene: Prevent NULL pointer dereferenceAxel Lin1-0/+5
platform_get_resource() can return NULL, thus add NULL test to prevent NULL pointer dereference. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30gpio: menz127: Drop lock field from struct men_z127_gpioAxel Lin1-5/+4
Current code uses a uninitialized spin lock. bgpio_init() already initialized a spin lock, so let's switch to use &gc->bgpio_lock instead and remove the lock from struct men_z127_gpio. Fixes: f436bc2726c6 "gpio: add driver for MEN 16Z127 GPIO controller" Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-18Merge tag 'mfd-for-linus-4.6' of ↵Linus Torvalds3-0/+146
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) New Device Support: - Supply device PCI IDs for Intel Broxton Fix-ups: - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu Bug Fixes: - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss" * tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: intel-lpss: Pass I2C configuration via properties on BXT mfd: imx6sx: Add PCIe register definitions for iomuxc gpr mfd: ipaq-micro: Use __maybe_unused to hide pm functions mfd: max77686: Add max77802 to I2C device ID table mfd: max77686: Export OF module alias information mfd: max77686: Allow driver to be built as a module mfd: stmpe: Add the proper PWM resources mfd: tps65090: Set regmap config reg counts properly mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled mfd: as3711: Set regmap config reg counts properly mfd: rc5t583: Set regmap config reg counts properly gpio: tps65086: Add GPO driver for the TPS65086 PMIC mfd: mt6397: Add platform device ID table mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists mfd: mt6397: Add MT6323 support to MT6397 driver mfd: mt6397: Add support for different Slave types mfd: mt6397: int_con and int_status may vary in location dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists mfd: Add documentation for ACT8945A DT bindings ...
2016-03-16gpio: mcp23s08: Fix clearing of interrupt.Phil Reid1-0/+4
The mcp23s18 is configurable on clearing the interrupt on either reading INTCAP or GPIO. Since driver reads INTCAP in IRQ and not the GPIO reg need to set control byte for this mode. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16gpiolib: Fix comment referring to gpio_*() in gpiod_*()Geert Uytterhoeven1-2/+2
Fixes: 79a9becda8940deb ("gpiolib: export descriptor-based GPIO interface") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bitGeert Uytterhoeven1-2/+4
pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes, which assumes a 32-bit platform, and is not correct on 64-bit platforms. Use "sizeof(...)" instead to fix this. Cc: stable@vger.kernel.org Fixes: b4818afeacbd8182 ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16gpio: xgene: Fix kconfig for standby GIPO contollerMatthias Brugger1-0/+1
The standby GPIO controller can be used as a interrupt controller. Select GPIOLIB_IRQCHIP when compiling this driver. Otherwise we get a compilation error: drivers/gpio/gpio-xgene-sb.c: In function 'xgene_gpio_sb_probe': drivers/gpio/gpio-xgene-sb.c:312:10: error: 'struct gpio_chip' has no member named 'irqdomain' priv->gc.irqdomain = priv->irq_domain; ^ scripts/Makefile.build:295: recipe for target 'drivers/gpio/gpio-xgene-sb.o' failed make[2]: *** [drivers/gpio/gpio-xgene-sb.o] Error 1 Fixes: 1013fc41 "gpio: xgene: Enable X-Gene standby GPIO as interrupt controller" Signed-off-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16gpio: tps65086: Add GPO driver for the TPS65086 PMICAndrew F. Davis3-0/+146
Add support for the TPS65086 PMIC GPOs. TPS65086 has four configurable GPOs that can be used for several purposes. These are output only. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-09gpio: tps65912: fix bad mergeLinus Walleij1-2/+2
I screwed up while merging the immutable branch for TPS65912, so fixing it unbroken again. Cc: Lee Jones <lee.jones@linaro.org> Cc: Andrew F. Davis <afd@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"Linus Walleij1-0/+22
This reverts commit 3fab91ea284a3b795327dda915a3c150a49e4be2.
2016-03-09gpio: omap: drop dev field from gpio_bank structureGrygorii Strashko1-28/+29
GPIO chip structure already has "parent" field which is used for the same purpose as "dev" field in gpio_bank structure - store pointer on GPIO device. Hence, drop duplicated "dev" field from gpio_bank structure. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09Merge branch 'ib-mfd-regulator-gpio-4.6' of ↵Linus Walleij2-80/+86
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into devel
2016-03-09gpio: mpc8xxx: Slightly update the code for better readabilityAxel Lin1-2/+5
Setting gc->direction_output to gc->direction_output looks strange. I think this change makes the intention more clear. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chipAxel Lin1-27/+21
*read_reg and *write_reg can be removed because at all the places to call them, we can just use gc->read_reg/gc->write_reg instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: mpc8xxx: Fixup setting gpio direction outputAxel Lin1-2/+1
For devtype with specific gpio_dir_out implementation, current code is wrong because below code sets both gc->direction_output and mpc8xxx_gc->direction_output to the same function. gc->direction_output = devtype->gpio_dir_out ?: gc->direction_output; mpc8xxx_gc->direction_output = gc->direction_output; Set mpc8xxx_gc->direction_output = gc->direction_output first to fix it. This way mpc8xxx_gc->direction_output actually calls the standard bgpio_dir_out() to update register. Fixes: commit 42178e2a1e42 ("drivers/gpio: Switch gpio-mpc8xxx to use gpio-generic") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: mcp23s08: Add support for mcp23s18Phil Reid1-4/+15
This patch adds support for the mcp23s18 which is very similar to the mcp23s17. A couple of control bits are not the same. Notable IOCON_HAEN (s17 only) & IOCON_INTCC. Which can be ignored. Patch changes the following: - Add mcp23s18 types. - Always set mirror bit if the dts defines mcp23s18. regardless of type. Mirror bit is ignored on 8 bit devices anyway. - In mcp23s08_probe use chip.ngpio instead of logic based on type to determine number of gpio lins to increment by. This is set appropiately by the call to mcp23s08_probe_one. - Add mcp23s18 to device tree documentation. - Remove statement that irqs don't work for spi. They do. Tested with mcp23s18. Signed-off-by: Phil Reid <preid@electromag.com.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: add driver for MEN 16Z127 GPIO controllerAndreas Werner3-0/+208
The 16Z127 is a 32bit GPIO controller on a MCB FPGA. Every single line can be configured as input and output. Push pull and open drain are supported as well as setting a debounce value for the input lines. Signed-off-by: Andreas Werner <andy@wernerandy.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_freeAxel Lin1-22/+0
The implementation of lp3943_gpio_request/lp3943_gpio_free test pin_used for tracing the pin usage. However, gpiolib already checks FLAG_REQUESTED flag for the same purpose. So remove the redundant implementation. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-08gpio: timberdale: Switch to devm_ioremap_resource()Amitoj Kaur Chawla1-17/+4
Replace calls to devm_request_mem_region and devm_ioremap with a direct call to devm_ioremap_resource instead and modify error handling. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the Coccinelle semantic patch that is used to make this change is as follows: //<smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size,e1,e; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start = e1 e = -devm_ioremap(dev,res->start,size); +devm_ioremap_resource(dev,res); if -(e == NULL) +(IS_ERR(e)) { ... -return ...; +return PTR_ERR(e); } //</smpl> Further, updated error handling by hand as devm_ioremap_resource gives appropriate error messages, so remove unnecessary error messages. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-08gpio: ts4800: Add IMX51 dependencyJulien Grossholtz1-0/+1
The TS-4800 is an i.MX515 board. Its GPIO driver should only be compiled for this CPU or for test builds. Signed-off-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-08Merge branch 'devm-gpiochip-add-data' into develLinus Walleij60-470/+218
2016-03-07gpiolib: rewrite gpiodev_add_to_listBamvor Jian Zhang1-40/+25
The original code of gpiodev_add_to_list is not very clear which lead to bugs or compiling warning, reference the following patches: Bugs: 1. Commit ef7c7553039b ("gpiolib: improve overlap check of range of gpio"). 2. Commit 96098df125c0 ("gpiolib: fix chip order in gpio list") Warning: 1. Commit e28ecca6eac4 ("gpio: fix warning about iterator"). of gpio"). There is a off-list discussion about how to improve it consequently. This commit try to follow this by rewriting the whole functions. Tested pass with my gpio mockup driver and test scripts[1]. [1] http://www.spinics.net/lists/linux-gpio/msg09598.html Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07gpio: moxart: Allow compile test buildAxel Lin1-1/+1
There is no build dependency for this driver, so enable COMPILE_TEST to get better build coverage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07gpio: moxart: Drop redundant code to set already initialized gpio_chip fieldsAxel Lin1-3/+0
These fields are initialized by bgpio_init() with exactly the same settings so remove the redundant code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: present the consumer of a line to userspaceLinus Walleij1-4/+4
I named the field representing the current user of GPIO line as "label" but this is too vague and ambiguous. Before anyone gets confused, rename it to "consumer" and indicate clearly in the documentation that this is a string set by the user of the line. Also clean up leftovers in the documentation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: fix abi regression in sysfsBamvor Jian Zhang1-1/+11
We started to assign the gpio_device as parent for the sysfs but this changes the expected layout of sysfs. Restore the previous behaviour. Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: mb86s7x: Allow compile test buildAxel Lin1-1/+1
There is no build dependency for this driver, so enable COMPILE_TEST to get better build coverage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: pisosr: Use gpiod_set_value_cansleep in pisosr_gpio_refresh()Axel Lin1-2/+2
This driver has .can_sleep flag set. So the pisosr_gpio_get() can be called from contexts that can sleep. Thus use the cansleep() variant in pisosr_gpio_refresh(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: pisosr: Use devm_gpiod_get_optional for gpio->load_gpioAxel Lin1-7/+4
gpio->load_gpio is optional, so use devm_gpiod_get_optional instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: xgene: fix type of variable containing error codesAndrzej Hajda1-1/+1
ret variable can contain error values and is compared with zero. Its type must be signed. The problem has been detected using coccinelle script scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: rcar: Use ARCH_RENESASSimon Horman1-1/+1
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: ts4800: Drop redundant code to set already initialized gpio_chip fieldsAxel Lin1-2/+0
Both chip->base and chip->label are correctly set by bgpio_init(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: brcmstb: Use list_for_each_entry at appropriate placesAxel Lin1-9/+4
Use list_for_each_entry to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: ath79: Check valid gpio count for both DT and non-DT casesAxel Lin1-4/+5
Move the code checking valid gpio count to cover both DT and non-DT cases. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25Merge branch 'devm_gpiochip' of https://github.com/ldewangan/linux-upstream ↵Linus Walleij59-470/+176
into devm-gpiochip-add-data
2016-02-25gpio: pisosr: Use devm_gpiod_get_optional for gpio->load_gpioAxel Lin1-7/+4
gpio->load_gpio is optional, so use devm_gpiod_get_optional instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: xgene: fix type of variable containing error codesAndrzej Hajda1-1/+1
ret variable can contain error values and is compared with zero. Its type must be signed. The problem has been detected using coccinelle script scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: rcar: Use ARCH_RENESASSimon Horman1-1/+1
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: ts4800: Drop redundant code to set already initialized gpio_chip fieldsAxel Lin1-2/+0
Both chip->base and chip->label are correctly set by bgpio_init(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: brcmstb: Use list_for_each_entry at appropriate placesAxel Lin1-9/+4
Use list_for_each_entry to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: ath79: Check valid gpio count for both DT and non-DT casesAxel Lin1-4/+5
Move the code checking valid gpio count to cover both DT and non-DT cases. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: rcar: Add Runtime PM handling for interruptsGeert Uytterhoeven1-0/+42
The R-Car GPIO driver handles Runtime PM for requested GPIOs only. When using a GPIO purely as an interrupt source, no Runtime PM handling is done, and the GPIO module's clock may not be enabled. To fix this: - Add .irq_request_resources() and .irq_release_resources() callbacks to handle Runtime PM when an interrupt is requested, - Add irq_bus_lock() and sync_unlock() callbacks to handle Runtime PM when e.g. disabling/enabling an interrupt, or configuring the interrupt type. Fixes: d5c3d84657db57bd "net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS" Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 20:32:54 +0000