| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Here's a set of changes that implement a PKCS#7 message parser in the kernel.
The PKCS#7 message parsing will then be used to limit kexec to authenticated
kernels only if so configured.
The changes provide the following facilities:
(1) Parse an ASN.1 PKCS#7 message and pick out useful bits such as the data
content and the X.509 certificates used to sign it and all the data
signatures.
(2) Verify all the data signatures against the set of X.509 certificates
available in the message.
(3) Follow the certificate chains and verify that:
(a) for every self-signed X.509 certificate, check that it validly signed
itself, and:
(b) for every non-self-signed certificate, if we have a 'parent'
certificate, the former is validly signed by the latter.
(4) Look for intersections between the certificate chains and the trusted
keyring, if any intersections are found, verify that the trusted
certificates signed the intersection point in the chain.
(5) For testing purposes, a key type can be made available that will take a
PKCS#7 message, check that the message is trustworthy, and if so, add its
data content into the key.
Note that (5) has to be altered to take account of the preparsing patches
already committed to this branch.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
struct key_preparsed_payload should have two payload pointers to correspond
with those in struct key.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Sage Weil <sage@redhat.com>
|
|
Provide a generic instantiation function for key types that use the preparse
hook. This makes it easier to prereserve key quota before keyrings get locked
to retain the new key.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Sage Weil <sage@redhat.com>
|
|
Provide a key type for testing the PKCS#7 parser. It is given a non-detached
PKCS#7 message as payload:
keyctl padd pkcs7_test a @s <stuff.pkcs7
The PKCS#7 wrapper is validated against the trusted certificates available and
then stripped off. If successful, the key can be read, which will give the
data content of the PKCS#7 message.
A suitable message can be created by running make on the attached Makefile.
This will produce a file called stuff.pkcs7 for test loading. The key3.x509
file should be put into the kernel source tree before it is built and
converted to DER form:
openssl x509 -in .../pkcs7/key3.x509 -outform DER -out key3.x509
###############################################################################
#
# Create a pkcs7 message and sign it twice
#
# openssl x509 -text -inform PEM -noout -in key2.x509
#
###############################################################################
stuff.pkcs7: stuff.txt key2.priv key2.x509 key4.priv key4.x509 certs
$(RM) $@
openssl smime -sign \
-signer key2.x509 \
-inkey key2.priv \
-signer key4.x509 \
-inkey key4.priv \
-in stuff.txt \
-certfile certs \
-out $@ -binary -outform DER -nodetach
openssl pkcs7 -inform DER -in stuff.pkcs7 -print_certs -noout
openssl asn1parse -inform DER -in stuff.pkcs7 -i >out
stuff.txt:
echo "The quick red fox jumped over the lazy brown dog" >stuff.txt
certs: key1.x509 key2.x509 key3.x509 key4.x509
cat key{1,3}.x509 >$@
###############################################################################
#
# Generate a signed key
#
# openssl x509 -text -inform PEM -noout -in key2.x509
#
###############################################################################
key2.x509: key2.x509_unsigned key1.priv key1.x509
openssl x509 \
-req -in key2.x509_unsigned \
-out key2.x509 \
-extfile key2.genkey -extensions myexts \
-CA key1.x509 \
-CAkey key1.priv \
-CAcreateserial
key2.priv key2.x509_unsigned: key2.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -outform PEM \
-config key2.genkey \
-keyout key2.priv \
-out key2.x509_unsigned
key2.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 2"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:FALSE"
@echo >>$@ "keyUsage=digitalSignature"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
###############################################################################
#
# Generate a couple of signing keys
#
# openssl x509 -text -inform PEM -noout -in key1.x509
#
###############################################################################
key1.x509: key1.x509_unsigned key4.priv key4.x509
openssl x509 \
-req -in key1.x509_unsigned \
-out key1.x509 \
-extfile key1.genkey -extensions myexts \
-CA key4.x509 \
-CAkey key4.priv \
-CAcreateserial
key1.priv key1.x509_unsigned: key1.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -outform PEM \
-config key1.genkey \
-keyout key1.priv \
-out key1.x509_unsigned
key1.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 1"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:TRUE"
@echo >>$@ "keyUsage=digitalSignature,keyCertSign"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
###############################################################################
#
# Generate a signed key
#
# openssl x509 -text -inform PEM -noout -in key4.x509
#
###############################################################################
key4.x509: key4.x509_unsigned key3.priv key3.x509
openssl x509 \
-req -in key4.x509_unsigned \
-out key4.x509 \
-extfile key4.genkey -extensions myexts \
-CA key3.x509 \
-CAkey key3.priv \
-CAcreateserial
key4.priv key4.x509_unsigned: key4.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -outform PEM \
-config key4.genkey \
-keyout key4.priv \
-out key4.x509_unsigned
key4.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 4"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:TRUE"
@echo >>$@ "keyUsage=digitalSignature,keyCertSign"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
###############################################################################
#
# Generate a couple of signing keys
#
# openssl x509 -text -inform PEM -noout -in key3.x509
#
###############################################################################
key3.priv key3.x509: key3.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -x509 -outform PEM \
-config key3.genkey \
-keyout key3.priv \
-out key3.x509
key3.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 3"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:TRUE"
@echo >>$@ "keyUsage=digitalSignature,keyCertSign"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
clean:
$(RM) *~
$(RM) key1.* key2.* key3.* key4.* stuff.* out certs
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Find the intersection between the X.509 certificate chain contained in a PKCS#7
message and a set of keys that we already know and trust.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
Verify certificate chain in the X.509 certificates contained within the PKCS#7
message as far as possible. If any signature that we should be able to verify
fails, we reject the whole lot.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
Find the appropriate key in the PKCS#7 key list and verify the signature with
it. There may be several keys in there forming a chain. Any link in that
chain or the root of that chain may be in our keyrings.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
Digest the data in a PKCS#7 signed-data message and attach to the
public_key_signature struct contained in the pkcs7_message struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
Implement a parser for a PKCS#7 signed-data message as described in part of
RFC 2315.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
Export certificate parse and free functions for use by modules.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
|
|
PKCS#7 validation requires access to the serial number and the raw names in an
X.509 certificate.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
|
|
git://git.linuxfoundation.org/llvmlinux/kernel
Pull LLVM patches from Behan Webster:
"Next set of patches to support compiling the kernel with clang.
They've been soaking in linux-next since the last merge window.
More still in the works for the next merge window..."
* tag 'llvmlinux-for-v3.16' of git://git.linuxfoundation.org/llvmlinux/kernel:
arm, unwind, LLVMLinux: Enable clang to be used for unwinding the stack
ARM: LLVMLinux: Change "extern inline" to "static inline" in glue-cache.h
all: LLVMLinux: Change DWARF flag to support gcc and clang
net: netfilter: LLVMLinux: vlais-netfilter
crypto: LLVMLinux: aligned-attribute.patch
|
|
into next
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 3.16:
- Added test vectors for SHA/AES-CCM/DES-CBC/3DES-CBC.
- Fixed a number of error-path memory leaks in tcrypt.
- Fixed error-path memory leak in caam.
- Removed unnecessary global mutex from mxs-dcp.
- Added ahash walk interface that can actually be asynchronous.
- Cleaned up caam error reporting.
- Allow crypto_user get operation to be used by non-root users.
- Add support for SSS module on Exynos.
- Misc fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6: (60 commits)
crypto: testmgr - add aead cbc des, des3_ede tests
crypto: testmgr - Fix DMA-API warning
crypto: cesa - tfm->__crt_alg->cra_type directly
crypto: sahara - tfm->__crt_alg->cra_name directly
crypto: padlock - tfm->__crt_alg->cra_name directly
crypto: n2 - tfm->__crt_alg->cra_name directly
crypto: dcp - tfm->__crt_alg->cra_name directly
crypto: cesa - tfm->__crt_alg->cra_name directly
crypto: ccp - tfm->__crt_alg->cra_name directly
crypto: geode - Don't use tfm->__crt_alg->cra_name directly
crypto: geode - Weed out printk() from probe()
crypto: geode - Consistently use AES_KEYSIZE_128
crypto: geode - Kill AES_IV_LENGTH
crypto: geode - Kill AES_MIN_BLOCK_SIZE
crypto: mxs-dcp - Remove global mutex
crypto: hash - Add real ahash walk interface
hwrng: n2-drv - Introduce the use of the managed version of kzalloc
crypto: caam - reinitialize keys_fit_inline for decrypt and givencrypt
crypto: s5p-sss - fix multiplatform build
hwrng: timeriomem - remove unnecessary OOM messages
...
|
|
__attribute__((aligned)) applies the default alignment for the largest scalar
type for the target ABI. gcc allows it to be applied inline to a defined type.
Clang only allows it to be applied to a type definition (PR11071).
Making it into 2 lines makes it more readable and works with both compilers.
Author: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle were:
- reduced/streamlined smp_mb__*() interface that allows more usecases
and makes the existing ones less buggy, especially in rarer
architectures
- add rwsem implementation comments
- bump up lockdep limits"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
rwsem: Add comments to explain the meaning of the rwsem's count field
lockdep: Increase static allocations
arch: Mass conversion of smp_mb__*()
arch,doc: Convert smp_mb__*()
arch,xtensa: Convert smp_mb__*()
arch,x86: Convert smp_mb__*()
arch,tile: Convert smp_mb__*()
arch,sparc: Convert smp_mb__*()
arch,sh: Convert smp_mb__*()
arch,score: Convert smp_mb__*()
arch,s390: Convert smp_mb__*()
arch,powerpc: Convert smp_mb__*()
arch,parisc: Convert smp_mb__*()
arch,openrisc: Convert smp_mb__*()
arch,mn10300: Convert smp_mb__*()
arch,mips: Convert smp_mb__*()
arch,metag: Convert smp_mb__*()
arch,m68k: Convert smp_mb__*()
arch,m32r: Convert smp_mb__*()
arch,ia64: Convert smp_mb__*()
...
|
|
Test vectors were taken from existing test for
CBC(DES3_EDE). Associated data has been added to test vectors.
HMAC computed with Crypto++ has been used. Following algos have
been covered.
(a) "authenc(hmac(sha1),cbc(des))"
(b) "authenc(hmac(sha1),cbc(des3_ede))"
(c) "authenc(hmac(sha224),cbc(des))"
(d) "authenc(hmac(sha224),cbc(des3_ede))"
(e) "authenc(hmac(sha256),cbc(des))"
(f) "authenc(hmac(sha256),cbc(des3_ede))"
(g) "authenc(hmac(sha384),cbc(des))"
(h) "authenc(hmac(sha384),cbc(des3_ede))"
(i) "authenc(hmac(sha512),cbc(des))"
(j) "authenc(hmac(sha512),cbc(des3_ede))"
Signed-off-by: Vakul Garg <vakul@freescale.com>
[NiteshNarayanLal@freescale.com: added hooks for the missing algorithms test and tested the patch]
Signed-off-by: Nitesh Lal <NiteshNarayanLal@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
With DMA-API debug enabled testmgr triggers a "DMA-API: device driver maps memory from stack" warning, when tested on a crypto HW accelerator.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Although the existing hash walk interface has already been used
by a number of ahash crypto drivers, it turns out that none of
them were really asynchronous. They were all essentially polling
for completion.
That's why nobody has noticed until now that the walk interface
couldn't work with a real asynchronous driver since the memory
is mapped using kmap_atomic.
As we now have a use-case for a real ahash implementation on x86,
this patch creates a minimal ahash walk interface. Basically it
just calls kmap instead of kmap_atomic and does away with the
crypto_yield call. Real ahash crypto drivers don't need to yield
since by definition they won't be hogging the CPU.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CRYPTO_USER requires CAP_NET_ADMIN for all operations. Most information
provided by CRYPTO_MSG_GETALG is also accessible through /proc/modules
and AF_ALG. CRYPTO_MSG_GETALG should not require CAP_NET_ADMIN so that
processes without CAP_NET_ADMIN can use CRYPTO_MSG_GETALG to get cipher
details, such as cipher priorities, for AF_ALG.
Signed-off-by: Matthias-Christian Ott <ott@mirix.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix leakage of memory for struct aead_request that is allocated via
aead_request_alloc() but not released via aead_request_free().
Reported by Coverity - CID 1163869.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto_alloc_aead() fails
Fix a potential memory leak in the error handling of test_aead_speed(). In case
crypto_alloc_aead() fails, the function returns without going through the
centralized cleanup path. Reported by Coverity - CID 1163870.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix a potential memory leak in the error handling of test_aead_speed(). In case
the size check on the associate data length parameter fails, the function goes
through the wrong exit label. Reported by Coverity - CID 1163870.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It is possible by passing a netlink socket to a more privileged
executable and then to fool that executable into writing to the socket
data that happens to be valid netlink message to do something that
privileged executable did not intend to do.
To keep this from happening replace bare capable and ns_capable calls
with netlink_capable, netlink_net_calls and netlink_ns_capable calls.
Which act the same as the previous calls except they verify that the
opener of the socket had the desired permissions as well.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mostly scripted conversion of the smp_mb__* barriers.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
SHA-256, SHA-384 and SHA-512
Patch adds large test-vectors for SHA algorithms for better code coverage in
optimized assembly implementations. Empty test-vectors are also added, as some
crypto drivers appear to have special case handling for empty input.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This adds test cases for SHA-1, SHA-224, SHA-256 and AES-CCM with an input size
that is an exact multiple of the block size. The reason is that some
implementations use a different code path for these cases.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This git patch adds x86_64 AVX2 optimization of SHA1
transform to crypto support. The patch has been tested with 3.14.0-rc1
kernel.
On a Haswell desktop, with turbo disabled and all cpus running
at maximum frequency, tcrypt shows AVX2 performance improvement
from 3% for 256 bytes update to 16% for 1024 bytes update over
AVX implementation.
This patch adds sha1_avx2_transform(), the glue, build and
configuration changes needed for AVX2 optimization of
SHA1 transform to crypto support.
sha1-ssse3 is one module which adds the necessary optimization
support (SSSE3/AVX/AVX2) for the low-level SHA1 transform function.
With better optimization support, transform function is overridden
as the case may be. In the case of AVX2, due to performance reasons
across datablock sizes, the AVX or AVX2 transform function is used
at run-time as it suits best. The Makefile change therefore appends
the necessary objects to the linkage. Due to this, the patch merely
appends AVX2 transform to the existing build mix and Kconfig support
and leaves the configuration build support as is.
Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The crypto algorithm modules utilizing the crypto daemon could
be used early when the system start up. Using module_init
does not guarantee that the daemon's work queue is initialized
when the cypto alorithm depending on crypto_wq starts. It is necessary
to initialize the crypto work queue earlier at the subsystem
init time to make sure that it is initialized
when used.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add test vectors for aead with null encryption and md5,
respectively sha1 authentication.
Input data is taken from test vectors listed in RFC2410.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
These defines might be needed by crypto drivers.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ahash_def_finup() can make use of the request save/restore functions,
thus make it so. This simplifies the code a little and unifies the code
paths.
Note that the same remark about free()ing the req->priv applies here, the
req->priv can only be free()'d after the original request was restored.
Finally, squash a bug in the invocation of completion in the ASYNC path.
In both ahash_def_finup_done{1,2}, the function areq->base.complete(X, err);
was called with X=areq->base.data . This is incorrect , as X=&areq->base
is the correct value. By analysis of the data structures, we see the areq is
of type 'struct ahash_request' , areq->base is of type 'struct crypto_async_request'
and areq->base.completion is of type crypto_completion_t, which is defined in
include/linux/crypto.h as:
typedef void (*crypto_completion_t)(struct crypto_async_request *req, int err);
This is one lead that the X should be &areq->base . Next up, we can inspect
other code which calls the completion callback to give us kind-of statistical
idea of how this callback is used. We can try:
$ git grep base\.complete\( drivers/crypto/
Finally, by inspecting ahash_request_set_callback() implementation defined
in include/crypto/hash.h , we observe that the .data entry of 'struct
crypto_async_request' is intended for arbitrary data, not for completion
argument.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The functions to save original request within a newly adjusted request
and it's counterpart to restore the original request can be re-used by
more code in the crypto/ahash.c file. Pull these functions out from the
code so they're available.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add documentation for the pointer voodoo that is happening in crypto/ahash.c
in ahash_op_unaligned(). This code is quite confusing, so add a beefy chunk
of documentation.
Moreover, make sure the mangled request is completely restored after finishing
this unaligned operation. This means restoring all of .result, .base.data
and .base.complete .
Also, remove the crypto_completion_t complete = ... line present in the
ahash_op_unaligned_done() function. This type actually declares a function
pointer, which is very confusing.
Finally, yet very important nonetheless, make sure the req->priv is free()'d
only after the original request is restored in ahash_op_unaligned_done().
The req->priv data must not be free()'d before that in ahash_op_unaligned_finish(),
since we would be accessing previously free()'d data in ahash_op_unaligned_done()
and cause corruption.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This adds the function blkcipher_aead_walk_virt_block, which allows the caller
to use the blkcipher walk API to handle the input and output scatterlists.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to allow other uses of the blkcipher walk API than the blkcipher
algos themselves, this patch copies some of the transform data members to the
walk struct so the transform is only accessed at walk init time.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We added the soft module dependency of crc32c module alias
to generic crc32c module so other hardware accelerated crc32c
modules could get loaded and used before the generic version.
We also renamed the crypto/crc32c.c containing the generic
crc32c crypto computation to crypto/crc32c_generic.c according
to convention.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull crypto update from Herbert Xu:
"Here is the crypto update for 3.14:
- Improved crypto_memneq helper
- Use cyprto_memneq in arch-specific crypto code
- Replaced orphaned DCP driver with Freescale MXS DCP driver
- Added AVX/AVX2 version of AESNI-GCM encode and decode
- Added AMD Cryptographic Coprocessor (CCP) driver
- Misc fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (41 commits)
crypto: aesni - fix build on x86 (32bit)
crypto: mxs - Fix sparse non static symbol warning
crypto: ccp - CCP device enabled/disabled changes
crypto: ccp - Cleanup hash invocation calls
crypto: ccp - Change data length declarations to u64
crypto: ccp - Check for caller result area before using it
crypto: ccp - Cleanup scatterlist usage
crypto: ccp - Apply appropriate gfp_t type to memory allocations
crypto: drivers - Sort drivers/crypto/Makefile
ARM: mxs: dts: Enable DCP for MXS
crypto: mxs - Add Freescale MXS DCP driver
crypto: mxs - Remove the old DCP driver
crypto: ahash - Fully restore ahash request before completing
crypto: aesni - fix build on x86 (32bit)
crypto: talitos - Remove redundant dev_set_drvdata
crypto: ccp - Remove redundant dev_set_drvdata
crypto: crypto4xx - Remove redundant dev_set_drvdata
crypto: caam - simplify and harden key parsing
crypto: omap-sham - Fix Polling mode for larger blocks
crypto: tcrypt - Added speed tests for AEAD crypto alogrithms in tcrypt test suite
...
|
|
When finishing the ahash request, the ahash_op_unaligned_done() will
call complete() on the request. Yet, this will not call the correct
complete callback. The correct complete callback was previously stored
in the requests' private data, as seen in ahash_op_unaligned(). This
patch restores the correct complete callback and .data field of the
request before calling complete() on it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
suite
Adding simple speed tests for a range of block sizes for AEAD crypto
algorithms.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit fe8c8a126806 introduced a possible build error for archs
that do not have CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS set. :/
Fix this up by bringing else braces outside of the ifdef.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: fe8c8a126806 ("crypto: more robust crypto_memneq")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-By: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A kernel with enabled lockdep complains about the wrong usage of
rcu_dereference() under a rcu_read_lock_bh() protected region.
===============================
[ INFO: suspicious RCU usage. ]
3.13.0-rc1+ #126 Not tainted
-------------------------------
linux/crypto/pcrypt.c:81 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
1 lock held by cryptomgr_test/153:
#0: (rcu_read_lock_bh){.+....}, at: [<ffffffff812c8075>] pcrypt_do_parallel.isra.2+0x5/0x200
Fix that by using rcu_dereference_bh() instead.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Disabling compiler optimizations can be fragile, since a new
optimization could be added to -O0 or -Os that breaks the assumptions
the code is making.
Instead of disabling compiler optimizations, use a dummy inline assembly
(based on RELOC_HIDE) to block the problematic kinds of optimization,
while still allowing other optimizations to be applied to the code.
The dummy inline assembly is added after every OR, and has the
accumulator variable as its input and output. The compiler is forced to
assume that the dummy inline assembly could both depend on the
accumulator variable and change the accumulator variable, so it is
forced to compute the value correctly before the inline assembly, and
cannot assume anything about its value after the inline assembly.
This change should be enough to make crypto_memneq work correctly (with
data-independent timing) even if it is inlined at its call sites. That
can be done later in a followup patch.
Compile-tested on x86_64.
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull crypto fixes from Herbert Xu:
"This push fixes a number of crashes triggered by a previous crypto
self-test update. It also fixes a build problem in the caam driver,
as well as a concurrency issue in s390.
Finally there is a pair of fixes to bugs in the crypto scatterwalk
code and authenc that may lead to crashes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: testmgr - fix sglen in test_aead for case 'dst != src'
crypto: talitos - fix aead sglen for case 'dst != src'
crypto: caam - fix aead sglen for case 'dst != src'
crypto: ccm - Fix handling of zero plaintext when computing mac
crypto: s390 - Fix aes-xts parameter corruption
crypto: talitos - corrrectly handle zero-length assoc data
crypto: scatterwalk - Set the chain pointer indication bit
crypto: authenc - Find proper IV address in ablkcipher callback
crypto: caam - Add missing Job Ring include
|
|
Pull networking updates from David Miller:
"Here is a pile of bug fixes that accumulated while I was in Europe"
1) In fixing kernel leaks to userspace during copying of socket
addresses, we broke a case that used to work, namely the user
providing a buffer larger than the in-kernel generic socket address
structure. This broke Ruby amongst other things. Fix from Dan
Carpenter.
2) Fix regression added by byte queue limit support in 8139cp driver,
from Yang Yingliang.
3) The addition of MSG_SENDPAGE_NOTLAST buggered up a few sendpage
implementations, they should just treat it the same as MSG_MORE.
Fix from Richard Weinberger and Shawn Landden.
4) Handle icmpv4 errors received on ipv6 SIT tunnels correctly, from
Oussama Ghorbel. In particular we should send an ICMPv6 unreachable
in such situations.
5) Fix some regressions in the recent genetlink fixes, in particular
get the pmcraid driver to use the new safer interfaces correctly.
From Johannes Berg.
6) macvtap was converted to use a per-cpu set of statistics, but some
code was still bumping tx_dropped elsewhere. From Jason Wang.
7) Fix build failure of xen-netback due to missing include on some
architectures, from Andy Whitecroft.
8) macvtap double counts received packets in statistics, fix from Vlad
Yasevich.
9) Fix various cases of using *_STATS_BH() when *_STATS() is more
appropriate. From Eric Dumazet and Hannes Frederic Sowa.
10) Pktgen ipsec mode doesn't update the ipv4 header length and checksum
properly after encapsulation. Fix from Fan Du.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
net/mlx4_en: Remove selftest TX queues empty condition
{pktgen, xfrm} Update IPv4 header total len and checksum after tranformation
virtio_net: make all RX paths handle erors consistently
virtio_net: fix error handling for mergeable buffers
virtio_net: Fixed a trivial typo (fitler --> filter)
netem: fix gemodel loss generator
netem: fix loss 4 state model
netem: missing break in ge loss generator
net/hsr: Support iproute print_opt ('ip -details ...')
net/hsr: Very small fix of comment style.
MAINTAINERS: Added net/hsr/ maintainer
ipv6: fix possible seqlock deadlock in ip6_finish_output2
ixgbe: Make ixgbe_identify_qsfp_module_generic static
ixgbe: turn NETIF_F_HW_L2FW_DOFFLOAD off by default
ixgbe: ixgbe_fwd_ring_down needs to be static
e1000: fix possible reset_task running after adapter down
e1000: fix lockdep warning in e1000_reset_task
e1000: prevent oops when adapter is being closed and reset simultaneously
igb: Fixed Wake On LAN support
inet: fix possible seqlock deadlocks
...
|
|
Commit 35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once)
added an internal flag MSG_SENDPAGE_NOTLAST, similar to
MSG_MORE.
algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages()
and need to see the new flag as identical to MSG_MORE.
This fixes sendfile() on AF_ALG.
v3: also fix udp
Cc: Tom Herbert <therbert@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org> # 3.4.x + 3.2.x
Reported-and-tested-by: Shawn Landden <shawnlandden@gmail.com>
Original-patch: Richard Weinberger <richard@nod.at>
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit d8a32ac25698cd60b02bed2100379803c7f964e3 (crypto: testmgr - make
test_aead also test 'dst != src' code paths) added support for different
source and destination buffers in test_aead.
This patch modifies the source and destination buffer lengths accordingly:
the lengths are not equal since encryption / decryption adds / removes
the ICV.
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For aead case when source and destination buffers are different,
there is an incorrect assumption that the source length includes the ICV
length. Fix this, since it leads to an oops when using sg_count() to
find the number of nents in the scatterlist:
Unable to handle kernel paging request for data at address 0x00000004
Faulting instruction address: 0xf91f7634
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=8 P4080 DS
Modules linked in: caamalg(+) caam_jr caam
CPU: 1 PID: 1053 Comm: cryptomgr_test Not tainted 3.11.0 #16
task: eeb24ab0 ti: eeafa000 task.ti: eeafa000
NIP: f91f7634 LR: f91f7f24 CTR: f91f7ef0
REGS: eeafbbc0 TRAP: 0300 Not tainted (3.11.0)
MSR: 00029002 <CE,EE,ME> CR: 44044044 XER: 00000000
DEAR: 00000004, ESR: 00000000
GPR00: f91f7f24 eeafbc70 eeb24ab0 00000002 ee8e0900 ee8e0800 00000024 c45c4462
GPR08: 00000010 00000000 00000014 0c0e4000 24044044 00000000 00000000 c0691590
GPR16: eeab0000 eeb23000 00000000 00000000 00000000 00000001 00000001 eeafbcc8
GPR24: 000000d1 00000010 ee2d5000 ee49ea10 ee49ea10 ee46f640 ee46f640 c0691590
NIP [f91f7634] aead_edesc_alloc.constprop.14+0x144/0x780 [caamalg]
LR [f91f7f24] aead_encrypt+0x34/0x288 [caamalg]
Call Trace:
[eeafbc70] [a1004000] 0xa1004000 (unreliable)
[eeafbcc0] [f91f7f24] aead_encrypt+0x34/0x288 [caamalg]
[eeafbcf0] [c020d77c] __test_aead+0x3ec/0xe20
[eeafbe20] [c020f35c] test_aead+0x6c/0xe0
[eeafbe40] [c020f420] alg_test_aead+0x50/0xd0
[eeafbe60] [c020e5e4] alg_test+0x114/0x2e0
[eeafbee0] [c020bd1c] cryptomgr_test+0x4c/0x60
[eeafbef0] [c0047058] kthread+0xa8/0xb0
[eeafbf40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
69084321 7d080034 5508d97e 69080001 0f080000 81290024 552807fe 0f080000
3a600001 5529003a 2f8a0000 40dd0028 <80e90004> 3ab50001 8109000c 70e30002
---[ end trace b3c3e23925c7484e ]---
While here, add a tcrypt mode for making it easy to test authenc
(needed for triggering case above).
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There are cases when cryptlen can be zero in crypto_ccm_auth():
-encryptiom: input scatterlist length is zero (no plaintext)
-decryption: input scatterlist contains only the mac
plus the condition of having different source and destination buffers
(or else scatterlist length = max(plaintext_len, ciphertext_len)).
These are not handled correctly, leading to crashes like:
root@p4080ds:~/crypto# insmod tcrypt.ko mode=45
------------[ cut here ]------------
kernel BUG at crypto/scatterwalk.c:37!
Oops: Exception in kernel mode, sig: 5 [#1]
SMP NR_CPUS=8 P4080 DS
Modules linked in: tcrypt(+) crc32c xts xcbc vmac pcbc ecb gcm ghash_generic gf128mul ccm ctr seqiv
CPU: 3 PID: 1082 Comm: cryptomgr_test Not tainted 3.11.0 #14
task: ee12c5b0 ti: eecd0000 task.ti: eecd0000
NIP: c0204d98 LR: f9225848 CTR: c0204d80
REGS: eecd1b70 TRAP: 0700 Not tainted (3.11.0)
MSR: 00029002 <CE,EE,ME> CR: 22044022 XER: 20000000
GPR00: f9225c94 eecd1c20 ee12c5b0 eecd1c28 ee879400 ee879400 00000000 ee607464
GPR08: 00000001 00000001 00000000 006b0000 c0204d80 00000000 00000002 c0698e20
GPR16: ee987000 ee895000 fffffff4 ee879500 00000100 eecd1d58 00000001 00000000
GPR24: ee879400 00000020 00000000 00000000 ee5b2800 ee607430 00000004 ee607460
NIP [c0204d98] scatterwalk_start+0x18/0x30
LR [f9225848] get_data_to_compute+0x28/0x2f0 [ccm]
Call Trace:
[eecd1c20] [f9225974] get_data_to_compute+0x154/0x2f0 [ccm] (unreliable)
[eecd1c70] [f9225c94] crypto_ccm_auth+0x184/0x1d0 [ccm]
[eecd1cb0] [f9225d40] crypto_ccm_encrypt+0x60/0x2d0 [ccm]
[eecd1cf0] [c020d77c] __test_aead+0x3ec/0xe20
[eecd1e20] [c020f35c] test_aead+0x6c/0xe0
[eecd1e40] [c020f420] alg_test_aead+0x50/0xd0
[eecd1e60] [c020e5e4] alg_test+0x114/0x2e0
[eecd1ee0] [c020bd1c] cryptomgr_test+0x4c/0x60
[eecd1ef0] [c0047058] kthread+0xa8/0xb0
[eecd1f40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
0f080000 81290024 552807fe 0f080000 5529003a 4bffffb4 90830000 39400000
39000001 8124000c 2f890000 7d28579e <0f090000> 81240008 91230004 4e800020
---[ end trace 6d652dfcd1be37bd ]---
Cc: <stable@vger.kernel.org>
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When performing an asynchronous ablkcipher operation the authenc
completion callback routine is invoked, but it does not locate and use
the proper IV.
The callback routine, crypto_authenc_encrypt_done, is updated to use
the same method of calculating the address of the IV as is done in
crypto_authenc_encrypt function which sets up the callback.
Cc: stable@vger.kernel.org
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit 09fbc47373826d67531380662b516de2da120545, which
caused the following build errors:
crypto/asymmetric_keys/x509_public_key.c: In function ‘x509_key_preparse’:
crypto/asymmetric_keys/x509_public_key.c:237:35: error: ‘system_trusted_keyring’ undeclared (first use in this function)
ret = x509_validate_trust(cert, system_trusted_keyring);
^
crypto/asymmetric_keys/x509_public_key.c:237:35: note: each undeclared identifier is reported only once for each function it appears in
reported by Jim Davis. Mimi says:
"I made the classic mistake of requesting this patch to be upstreamed
at the last second, rather than waiting until the next open window.
At this point, the best course would probably be to revert the two
commits and fix them for the next open window"
Reported-by: Jim Davis <jim.epost@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
