summaryrefslogtreecommitdiff
path: root/block/opal_proto.h
AgeCommit message (Collapse)AuthorFilesLines
2023-04-05sed-opal: allow user authority to get locking range attributes.Ondrej Kozina1-0/+1
Extend ACE set of locking range attributes accessible to user authority. This patch allows user authority to get following locking range attribues when user get added to locking range via IOC_OPAL_ADD_USR_TO_LR: locking range start locking range end read lock enabled write lock enabled read locked write locked lock on reset active key Note: Admin1 authority always remains in the ACE. Otherwise it breaks current userspace expecting Admin1 in the ACE (sedutils). See TCG OPAL2 s.4.3.1.7 "ACE_Locking_RangeNNNN_Get_RangeStartToActiveKey". Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230405111223.272816-4-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: add helper for adding user authorities in ACE.Ondrej Kozina1-0/+9
Move ACE construction away from add_user_to_lr routine and refactor it to be used also in later code. Also adds boolean operators defines from TCG Core specification. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-3-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-22block: sed-opal: Add ioctl to return device statusdougmill@linux.vnet.ibm.com1-0/+5
Provide a mechanism to retrieve basic status information about the device, including the "supported" flag indicating whether SED-OPAL is supported. The information returned is from the various feature descriptors received during the discovery0 step, and so this ioctl does nothing more than perform the discovery0 step and then save the information received. See "struct opal_status" and OPAL_FL_* bits for the status information currently returned. This is necessary to be able to check whether a device is OPAL enabled, set up, locked or unlocked from userspace programs like systemd-cryptsetup and libcryptsetup. Right now we just have to assume the user 'knows' or blindly attempt setup/lock/unlock operations. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Tested-by: Luca Boccassi <bluca@debian.org> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20220816140713.84893-1-luca.boccassi@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12block: sed-opal: Change the check condition for regular session validityRevanth Rajashekar1-0/+1
This patch changes the check condition for the validity/authentication of the session. 1. The Host Session Number(HSN) in the response should match the HSN for the session. 2. The TPER Session Number(TSN) can never be less than 4096 for a regular session. Reference: Section 3.2.2.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage_Opal_SSC_Application_Note_1-00_1-00-Final.pdf Section 3.3.7.1.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage_Architecture_Core_Spec_v2.01_r1.00.pdf Co-developed-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com> Signed-off-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-18block: sed-opal: Introduce SUM_SET_LIST parameter and append it using ↵Revanth Rajashekar1-0/+4
'add_token_u64' In function 'activate_lsp', rather than hard-coding the short atom header(0x83), we need to let the function 'add_short_atom_header' append the header based on the parameter being appended. The parameter has been defined in Section 3.1.2.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage-Opal_Feature_Set_Single_User_Mode_v1-00_r1-00-Final.pdf Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04block: sed-opal: Introduce Opal Datastore UIDRevanth Rajashekar1-0/+1
This patch introduces Opal Datastore UID. The generic read/write table ioctl can use this UID to access the Opal Datastore. Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04block: sed-opal: Add support to read/write opal tables genericallyRevanth Rajashekar1-1/+0
This feature gives the user RW access to any opal table with admin1 authority. The flags described in the new structure determines if the user wants to read/write the data. Flags are checked for valid values in order to allow future features to be added to the ioctl. The user can provide the desired table's UID. Also, the ioctl provides a size and offset field and internally will loop data accesses to return the full data block. Read overrun is prevented by the initiator's sec_send_recv() backend. The ioctl provides a private field with the intention to accommodate any future expansions to the ioctl. Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20block: sed-opal: Removed duplicate OPAL_METHOD_LENGTH definitionRevanth Rajashekar1-2/+0
The original commit adding the sed-opal library by mistake added two definitions of OPAL_METHOD_LENGTH, remove one of them. Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20block: sed-opal: Add/remove spacesRevanth Rajashekar1-2/+1
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-29block: sed-opal: check size of shadow mbrJonas Rabenstein1-0/+16
Check whether the shadow mbr does fit in the provided space on the target. Also a proper firmware should handle this case and return an error we may prevent problems or even damage with crappy firmwares. Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: switch all files cleared marked as GPLv2 to SPDX tagsChristoph Hellwig1-9/+1
All these files have some form of the usual GPLv2 boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: add token for OPAL_LIFECYCLEDavid Kozub1-0/+2
Define OPAL_LIFECYCLE token and use it instead of literals in get_lsp_lifecycle. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-11block: sed-opal: Set MBRDone on S3 resume path if TPER is MBREnabledScott Bauer1-0/+1
Users who are booting off their Opal enabled drives are having issues when they have a shadow MBR set up after s3/resume cycle. When the Drive has a shadow MBR setup the MBRDone flag is set to false upon power loss (S3/S4/S5). When the MBRDone flag is false I/O to LBA 0 -> LBA_END_MBR are remapped to the shadow mbr of the drive. If the drive contains useful data in the 0 -> end_mbr range upon s3 resume the user can never get to that data as the drive will keep remapping it to the MBR. To fix this when we unlock on S3 resume, we need to tell the drive that we're done with the shadow mbr (even though we didnt use it) by setting true to MBRDone. This way the drive will stop the remapping and the user can access their data. Acked-by Jon Derrick: <jonathan.derrick@intel.com> Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-02-17block/sed-opal: allocate struct opal_dev dynamicallyChristoph Hellwig1-0/+23
Insted of bloating the containing structure with it all the time this allocates struct opal_dev dynamically. Additionally this allows moving the definition of struct opal_dev into sed-opal.c. For this a new private data field is added to it that is passed to the send/receive callback. After that a lot of internals can be made private as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Scott Bauer <scott.bauer@intel.com> Reviewed-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06block: Add Sed-opal libraryScott Bauer1-0/+429
This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 01:10:41 +0000