summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2008-04-27KVM: MMU: Don't assume struct page for x86Anthony Liguori2-59/+56
This patch introduces a gfn_to_pfn() function and corresponding functions like kvm_release_pfn_dirty(). Using these new functions, we can modify the x86 MMU to no longer assume that it can always get a struct page for any given gfn. We don't want to eliminate gfn_to_page() entirely because a number of places assume they can do gfn_to_page() and then kmap() the results. When we support IO memory, gfn_to_page() will fail for IO pages although gfn_to_pfn() will succeed. This does not implement support for avoiding reference counting for reserved RAM or for IO memory. However, it should make those things pretty straight forward. Since we're only introducing new common symbols, I don't think it will break the non-x86 architectures but I haven't tested those. I've tested Intel, AMD, NPT, and hugetlbfs with Windows and Linux guests. [avi: fix overflow when shifting left pfns by adding casts] Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Enable kvm build for ia64Xiantao Zhang4-0/+111
Update the related Makefile and KConfig for kvm build Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add kvm sal/pal virtulization supportXiantao Zhang1-0/+500
Some sal/pal calls would be traped to kvm for virtulization from guest firmware. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add guest interruption injection supportXiantao Zhang1-0/+970
process.c mainly handle interruption injection, and some faults handling. Signed-off-by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Generate offset values for assembly code useXiantao Zhang1-0/+251
asm-offsets.c will generate offset values used for assembly code for some fileds of special structures. Signed-off-by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add optimization for some virtulization faultsXiantao Zhang1-0/+918
optvfault.S Add optimization for some performance-critical virtualization faults. Signed-off-by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add processor virtulization supportXiantao Zhang1-0/+2163
vcpu.c provides processor virtualization logic for kvm. Signed-off-by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add trampoline for guest/host mode switchXiantao Zhang1-0/+1038
trampoline code targets for guest/host world switch. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add mmio decoder for kvm/ia64Xiantao Zhang1-0/+341
mmio.c includes mmio decoder, and related mmio logics. Signed-off-by: Anthony Xu <Anthony.xu@intel.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add interruption vector table for vmmXiantao Zhang1-0/+1424
vmm_ivt.S includes an ivt for vmm use. Signed-off-by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add TLB virtulization supportXiantao Zhang1-0/+636
vtlb.c includes tlb/VHPT virtulization. Signed-off-by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: VMM module interfacesXiantao Zhang1-0/+66
vmm.c adds the interfaces with kvm/module, and initialize global data area. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add header files for kvm/ia64Xiantao Zhang5-0/+1421
kvm_minstate.h : Marcos about Min save routines. lapic.h: apic structure definition. vcpu.h : routions related to vcpu virtualization. vti.h : Some macros or routines for VT support on Itanium. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: ia64: Add kvm arch-specific core code for kvm/ia64Xiantao Zhang1-0/+1789
kvm_ia64.c is created to handle kvm ia64-specific core logic. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: rename stfl to kvm_stflHeiko Carstens1-2/+2
Temporarily rename this function to avoid merge conflicts and/or dependencies. This function will be removed as soon as git-s390 and kvm.git are finally upstream. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: Fix incorrect return valueHeiko Carstens1-1/+1
kvm_arch_vcpu_ioctl_run currently incorrectly always returns 0. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: prepopulate guest pages after write-protectingMarcelo Tosatti1-1/+1
Zdenek reported a bug where a looping "dmsetup status" eventually hangs on SMP guests. The problem is that kvm_mmu_get_page() prepopulates the shadow MMU before write protecting the guest page tables. By doing so, it leaves a window open where the guest can mark a pte as present while the host has shadow cached such pte as "notrap". Accesses to such address will fault in the guest without the host having a chance to fix the situation. Fix by moving the write protection before the pte prefetch. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: Only mark_page_accessed() if the page was accessed by the guestAvi Kivity1-1/+2
If the accessed bit is not set, the guest has never accessed this page (at least through this spte), so there's no need to mark the page accessed. This provides more accurate data for the eviction algortithm. Noted by Andrea Arcangeli. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Free apic access page on vm destructionAvi Kivity1-0/+2
Noticed by Marcelo Tosatti. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: allow the vm to shrink the kvm mmu shadow cachesIzik Eidus1-2/+56
Allow the Linux memory manager to reclaim memory in the kvm shadow cache. Signed-off-by: Izik Eidus <izike@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: unify slots_lock usageMarcelo Tosatti4-51/+25
Unify slots_lock acquision around vcpu_run(). This is simpler and less error-prone. Also fix some callsites that were not grabbing the lock properly. [avi: drop slots_lock while in guest mode to avoid holding the lock for indefinite periods] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: Enable MSR Bitmap featureSheng Yang1-7/+60
MSR Bitmap controls whether the accessing of an MSR causes VM Exit. Eliminating exits on automatically saved and restored MSRs yields a small performance gain. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27s390: KVM guest: detect when running on kvmCarsten Otte3-3/+18
This patch adds functionality to detect if the kernel runs under the KVM hypervisor. A macro MACHINE_IS_KVM is exported for device drivers. This allows drivers to skip device detection if the systems runs non-virtualized. We also define a preferred console to avoid having the ttyS0, which is a line mode only console. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: add kvm to kconfig on s390Christian Borntraeger2-0/+46
This patch adds the virtualization submenu and the kvm option to the kernel config. It also defines HAVE_KVM for 64bit kernels. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: intercepts for diagnose instructionsChristian Borntraeger5-1/+73
This patch introduces interpretation of some diagnose instruction intercepts. Diagnose is our classic architected way of doing a hypercall. This patch features the following diagnose codes: - vm storage size, that tells the guest about its memory layout - time slice end, which is used by the guest to indicate that it waits for a lock and thus cannot use up its time slice in a useful way - ipl functions, which a guest can use to reset and reboot itself In order to implement ipl functions, we also introduce an exit reason that causes userspace to perform various resets on the virtual machine. All resets are described in the principles of operation book, except KVM_S390_RESET_IPL which causes a reboot of the machine. Acked-by: Martin Schwidefsky <martin.schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: interprocessor communication via sigpChristian Borntraeger5-3/+323
This patch introduces in-kernel handling of _some_ sigp interprocessor signals (similar to ipi). kvm_s390_handle_sigp() decodes the sigp instruction and calls individual handlers depending on the operation requested: - sigp sense tries to retrieve information such as existence or running state of the remote cpu - sigp emergency sends an external interrupt to the remove cpu - sigp stop stops a remove cpu - sigp stop store status stops a remote cpu, and stores its entire internal state to the cpus lowcore - sigp set arch sets the architecture mode of the remote cpu. setting to ESAME (s390x 64bit) is accepted, setting to ESA/S390 (s390, 31 or 24 bit) is denied, all others are passed to userland - sigp set prefix sets the prefix register of a remote cpu For implementation of this, the stop intercept indication starts to get reused on purpose: a set of action bits defines what to do once a cpu gets stopped: ACTION_STOP_ON_STOP really stops the cpu when a stop intercept is recognized ACTION_STORE_ON_STOP stores the cpu status to lowcore when a stop intercept is recognized Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: intercepts for privileged instructionsChristian Borntraeger5-1/+339
This patch introduces in-kernel handling of some intercepts for privileged instructions: handle_set_prefix() sets the prefix register of the local cpu handle_store_prefix() stores the content of the prefix register to memory handle_store_cpu_address() stores the cpu number of the current cpu to memory handle_skey() just decrements the instruction address and retries handle_stsch() delivers condition code 3 "operation not supported" handle_chsc() same here handle_stfl() stores the facility list which contains the capabilities of the cpu handle_stidp() stores cpu type/model/revision and such handle_stsi() stores information about the system topology Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: interrupt subsystem, cpu timer, waitpswCarsten Otte5-3/+765
This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: sie intercept handlingChristian Borntraeger4-2/+133
This path introduces handling of sie intercepts in three flavors: Intercepts are either handled completely in-kernel by kvm_handle_sie_intercept(), or passed to userspace with corresponding data in struct kvm_run in case kvm_handle_sie_intercept() returns -ENOTSUPP. In case of partial execution in kernel with the need of userspace support, kvm_handle_sie_intercept() may choose to set up struct kvm_run and return -EREMOTE. The trivial intercept reasons are handled in this patch: handle_noop() just does nothing for intercepts that don't require our support at all handle_stop() is called when a cpu enters stopped state, and it drops out to userland after updating our vcpu state handle_validity() faults in the cpu lowcore if needed, or passes the request to userland Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: arch backend for the kvm kernel moduleHeiko Carstens7-1/+932
This patch contains the port of Qumranet's kvm kernel module to IBM zSeries (aka s390x, mainframe) architecture. It uses the mainframe's virtualization instruction SIE to run virtual machines with up to 64 virtual CPUs each. This port is only usable on 64bit host kernels, and can only run 64bit guest kernels. However, running 31bit applications in guest userspace is possible. The following source files are introduced by this patch arch/s390/kvm/kvm-s390.c similar to arch/x86/kvm/x86.c, this implements all arch callbacks for kvm. __vcpu_run calls back into sie64a to enter the guest machine context arch/s390/kvm/sie64a.S assembler function sie64a, which enters guest context via SIE, and switches world before and after that include/asm-s390/kvm_host.h contains all vital data structures needed to run virtual machines on the mainframe include/asm-s390/kvm.h defines kvm_regs and friends for user access to guest register content arch/s390/kvm/gaccess.h functions similar to uaccess to access guest memory arch/s390/kvm/kvm-s390.h header file for kvm-s390 internals, extended by later patches Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27s390: KVM preparation: provide hook to enable pgstes in user pagetableCarsten Otte3-3/+70
The SIE instruction on s390 uses the 2nd half of the page table page to virtualize the storage keys of a guest. This patch offers the s390_enable_sie function, which reorganizes the page tables of a single-threaded process to reserve space in the page table: s390_enable_sie makes sure that the process is single threaded and then uses dup_mm to create a new mm with reorganized page tables. The old mm is freed and the process has now a page status extended field after every page table. Code that wants to exploit pgstes should SELECT CONFIG_PGSTE. This patch has a small common code hit, namely making dup_mm non-static. Edit (Carsten): I've modified Martin's patch, following Jeremy Fitzhardinge's review feedback. Now we do have the prototype for dup_mm in include/linux/sched.h. Following Martin's suggestion, s390_enable_sie() does now call task_lock() to prevent race against ptrace modification of mm_users. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86: hardware task switching supportIzik Eidus5-3/+498
This emulates the x86 hardware task switch mechanism in software, as it is unsupported by either vmx or svm. It allows operating systems which use it, like freedos, to run as kvm guests. Signed-off-by: Izik Eidus <izike@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86: add functions to get the cpl of vcpuIzik Eidus2-0/+23
Signed-off-by: Izik Eidus <izike@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: Add module option to disable flexpriorityAvi Kivity1-2/+6
Useful for debugging. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: no longer EXPERIMENTALAvi Kivity1-1/+1
Long overdue. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: Introduce and use spte_to_page()Avi Kivity1-5/+12
Encapsulate the pte mask'n'shift in a function. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: fix dirty bit setting when removing write permissionsIzik Eidus1-0/+8
When mmu_set_spte() checks if a page related to spte should be release as dirty or clean, it check if the shadow pte was writeble, but in case rmap_write_protect() is called called it is possible for shadow ptes that were writeble to become readonly and therefor mmu_set_spte will release the pages as clean. This patch fix this issue by marking the page as dirty inside rmap_write_protect(). Signed-off-by: Izik Eidus <izike@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: Set the accessed bit on non-speculative shadow ptesAvi Kivity2-5/+7
If we populate a shadow pte due to a fault (and not speculatively due to a pte write) then we can set the accessed bit on it, as we know it will be set immediately on the next guest instruction. This saves a read-modify-write operation. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27x86: KVM guest: disable clock before rebooting.Glauber Costa1-0/+27
This patch writes 0 (actually, what really matters is that the LSB is cleared) to the system time msr before shutting down the machine for kexec. Without it, we can have a random memory location being written when the guest comes back It overrides the functions shutdown, used in the path of kernel_kexec() (sys.c) and crash_shutdown, used in the path of crash_kexec() (kexec.c) Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27x86: make native_machine_shutdown non-staticGlauber Costa1-1/+1
it will allow external users to call it. It is mainly useful for routines that will override its machine_ops field for its own special purposes, but want to call the normal shutdown routine after they're done Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27x86: allow machine_crash_shutdown to be replacedGlauber Costa2-2/+12
This patch a llows machine_crash_shutdown to be replaced, just like any of the other functions in machine_ops Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27x86: KVM guest: hypercall batchingMarcelo Tosatti1-2/+60
Batch pte updates and tlb flushes in lazy MMU mode. [avi: - adjust to mmu_op - helper for getting para_state without debug warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27x86: KVM guest: hypercall based pte updates and TLB flushesMarcelo Tosatti1-0/+138
Hypercall based pte updates are faster than faults, and also allow use of the lazy MMU mode to batch operations. Don't report the feature if two dimensional paging is enabled. [avi: - guest/host split - fix 32-bit truncation issues - adjust to mmu_op - adjust to ->release_*() renamed - add ->release_pud()] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: hypercall based pte updates and TLB flushesMarcelo Tosatti2-2/+152
Hypercall based pte updates are faster than faults, and also allow use of the lazy MMU mode to batch operations. Don't report the feature if two dimensional paging is enabled. [avi: - one mmu_op hypercall instead of one per op - allow 64-bit gpa on hypercall - don't pass host errors (-ENOMEM) to guest] [akpm: warning fix on i386] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Provide unlocked version of emulator_write_phys()Avi Kivity1-7/+14
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27x86: KVM guest: add basic paravirt supportMarcelo Tosatti5-0/+64
Add basic KVM paravirt support. Avoid vm-exits on IO delays. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: add basic paravirt supportMarcelo Tosatti1-0/+1
Add basic KVM paravirt support. Avoid vm-exits on IO delays. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Add reset support for in kernel PITSheng Yang2-11/+20
Separate the reset part and prepare for reset support. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Add save/restore supporting of in kernel PITSheng Yang3-0/+56
Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: In kernel PIT modelSheng Yang5-1/+661
The patch moves the PIT model from userspace to kernel, and increases the timer accuracy greatly. [marcelo: make last_injected_time per-guest] Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Tested-and-Acked-by: Alex Davis <alex14641@yahoo.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 14:03:31 +0000