summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-02-06arch/x86/mm/numa.c: fix array index overflow when synchronizing nid to ↵Tang Chen1-8/+11
memblock.reserved. The following path will cause array out of bound. memblock_add_region() will always set nid in memblock.reserved to MAX_NUMNODES. In numa_register_memblks(), after we set all nid to correct valus in memblock.reserved, we called setup_node_data(), and used memblock_alloc_nid() to allocate memory, with nid set to MAX_NUMNODES. The nodemask_t type can be seen as a bit array. And the index is 0 ~ MAX_NUMNODES-1. After that, when we call node_set() in numa_clear_kernel_node_hotplug(), the nodemask_t got an index of value MAX_NUMNODES, which is out of [0 ~ MAX_NUMNODES-1]. See below: numa_init() |---> numa_register_memblks() | |---> memblock_set_node(memory) set correct nid in memblock.memory | |---> memblock_set_node(reserved) set correct nid in memblock.reserved | |...... | |---> setup_node_data() | |---> memblock_alloc_nid() here, nid is set to MAX_NUMNODES (1024) |...... |---> numa_clear_kernel_node_hotplug() |---> node_set() here, we have an index 1024, and overflowed This patch moves nid setting to numa_clear_kernel_node_hotplug() to fix this problem. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: Dave Jones <davej@redhat.com> Cc: David Rientjes <rientjes@google.com> Tested-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-06arch/x86/mm/numa.c: initialize numa_kernel_nodes in ↵Tang Chen1-1/+1
numa_clear_kernel_node_hotplug() On-stack variable numa_kernel_nodes in numa_clear_kernel_node_hotplug() was not initialized. So we need to initialize it. [akpm@linux-foundation.org: use NODE_MASK_NONE, per David] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: Dave Jones <davej@redhat.com> Reported-by: David Rientjes <rientjes@google.com> Tested-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-05Merge tag 'stable/for-linus-3.14-rc1-tag' of ↵Linus Torvalds3-5/+29
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from Konrad Rzeszutek Wilk: "Bug-fixes: - Revert "xen/grant-table: Avoid m2p_override during mapping" as it broke Xen ARM build. - Fix CR4 not being set on AP processors in Xen PVH mode" * tag 'stable/for-linus-3.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: set CR4 flags for APs Revert "xen/grant-table: Avoid m2p_override during mapping"
2014-02-05Merge tag 'please-pull-ia64-syscalls' of ↵Linus Torvalds3-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 update from Tony Luck: "Wire up new sched_setattr and sched_getattr syscalls" * tag 'please-pull-ia64-syscalls' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Wire up new sched_setattr and sched_getattr syscalls
2014-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2-52/+108
Pull crypto fixes from Herbert Xu: "This fixes a number of concurrency issues on s390 where multiple users of the same crypto transform may clobber each other's results" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s390 - fix des and des3_ede ctr concurrency issue crypto: s390 - fix des and des3_ede cbc concurrency issue crypto: s390 - fix concurrency issue in aes-ctr mode
2014-02-05x86: Disable CONFIG_X86_DECODER_SELFTEST in allmod/allyesconfigsIngo Molnar1-0/+1
It can take some time to validate the image, make sure {allyes|allmod}config doesn't enable it. I'd say randconfig will cover it often enough, and the failure is also borderline build coverage related: you cannot really make the decoder test fail via source level changes, only with changes in the build environment, so I agree with Andi that we can disable this one too. Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Paul Gortmaker paul.gortmaker@windriver.com> Suggested-and-acked-by: Andi Kleen andi@firstfloor.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-05execve: use 'struct filename *' for executable name passingLinus Torvalds1-14/+1
This changes 'do_execve()' to get the executable name as a 'struct filename', and to free it when it is done. This is what the normal users want, and it simplifies and streamlines their error handling. The controlled lifetime of the executable name also fixes a use-after-free problem with the trace_sched_process_exec tracepoint: the lifetime of the passed-in string for kernel users was not at all obvious, and the user-mode helper code used UMH_WAIT_EXEC to serialize the pathname allocation lifetime with the execve() having finished, which in turn meant that the trace point that happened after mm_release() of the old process VM ended up using already free'd memory. To solve the kernel string lifetime issue, this simply introduces "getname_kernel()" that works like the normal user-space getname() function, except with the source coming from kernel memory. As Oleg points out, this also means that we could drop the tcomm[] array from 'struct linux_binprm', since the pathname lifetime now covers setup_new_exec(). That would be a separate cleanup. Reported-by: Igor Zhbanov <i.zhbanov@samsung.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-03xen/pvh: set CR4 flags for APsMukesh Rathor1-0/+12
During bootup in the 'probe_page_size_mask' these CR4 flags are set in there. But for AP processors they are not set as we do not use 'secondary_startup_64' which the baremetal kernels uses. Instead do it in this function which we use in Xen PVH during our startup for AP processors. As such fix it up to make sure we have that flag set. Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-02-03Revert "xen/grant-table: Avoid m2p_override during mapping"Konrad Rzeszutek Wilk2-5/+17
This reverts commit 08ece5bb2312b4510b161a6ef6682f37f4eac8a1. As it breaks ARM builds and needs more attention on the ARM side. Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-02-02parisc: add flexible mmap memory layout supportHelge Deller6-43/+233
Add support for the flexible mmap memory layout (as described in http://lwn.net/Articles/91829). This is especially very interesting on parisc since we currently only support 32bit userspace (even with a 64bit Linux kernel). Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: Make EWOULDBLOCK be equal to EAGAIN on pariscGuy Martin1-1/+1
On Linux, only parisc uses a different value for EWOULDBLOCK which causes a lot of troubles for applications not checking for both values. Since the hpux compat is long dead, make EWOULDBLOCK behave the same as all other architectures. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: convert uapi/asm/stat.h to use native types onlyHelge Deller1-21/+19
The stat.h header file is exported to userspace. Some userspace applications failed to compile due to missing/unknown types, so we better convert it to use native types only (like it's done on other architectures too). Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: wire up sched_setattr and sched_getattrHelge Deller2-1/+5
Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: fix cache-flushingHelge Deller3-3/+16
This commit: f8dae00684d678afa13041ef170cecfd1297ed40: parisc: Ensure full cache coherency for kmap/kunmap caused negative caching side-effects, e.g. hanging processes with expect and too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems. This patch now partly reverts it and has been in production use on our debian buildd makeservers since a week without any major problems. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02Merge tag 'fixes-for-linus' of ↵Linus Torvalds27-43/+381
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's a set of patches for (hopefully) -rc1. Some of them are fixes, but a good number of them also do things such as enable new drivers in the defconfigs for platforms that have such devices, increases coverage of the multiplatform defconfig and some DTS changes that plumbs up some of the devices that now have bindings and driver support. The commit dates are recent; we've mostly collected these fixes in the last few days but I also had to rebuild the branch yesterday to sort out some internal conflicts which reset the timestamps. The changes should have been tested by each platform maintainer already (and few of them have cross-platform impact) so I'm personally not too concerned by it at this time" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA ARM: multi_v7_defconfig: add mvebu drivers clocksource: kona: Add basic use of external clock drivers: bus: fix CCI driver kcalloc call parameters swap ARM: dts: bcm28155-ap: Fix Card Detection GPIO ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers ARM: dts: zynq: Add SDHCI nodes ARM: hisi: don't select SMP ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS ARM: multi_v7: copy most options from tegra_defconfig ARM: iop32x: fix power off handling for the EM7210 board ARM: integrator: restore static map on the CP ARM: msm_defconfig: Enable MSM clock drivers ARM: dts: msm: Add clock controller nodes and hook into uart ARM: OMAP4+: move errata initialization to omap4_pm_init_early ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference ...
2014-02-01tile: remove compat_sys_lookup_dcookie declaration to fix compile errorHeiko Carstens1-1/+0
With commit d8d14bd09cdd ("fs/compat: fix lookup_dcookie() parameter handling") I changed the type of the len parameter of the lookup_dcookie() syscall. However I missed that there was still a stale declaration in arch/tile/.. which now causes a compile error on tile: In file included from fs/dcookies.c:28:0: include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie' fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie' Simply remove the declaration in the tile architecture, which is only a leftover from before the different compat lookup_dcookie() versions have been merged. The correct declaration is now in include/linux/compat.h The build error was reported by Fenguang's build bot. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-31ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMAOlof Johansson1-10/+2
TI_EDMA fell out of automatically selected options in the multi_v7 defconfig due to a select being removed from the davinci Kconfig entry. So we need to re-enable explicitly to not regress some platforms. The rest is just the result of running 'make multi_v7_defconfig + make savedefconfig' to remove entries that are no longer needed due to changed dependencies/selects or defaults. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: multi_v7_defconfig: add mvebu driversOlof Johansson1-0/+10
Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: dts: bcm28155-ap: Fix Card Detection GPIOTim Kryger1-1/+3
The board schematic states that the "SD_CARD_DET_N gets pulled to GND when card is inserted" so the polarity has been updated to active low. Polarity is now specified with a GPIO define instead of a magic number. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31Merge tag 'renesas-dt-fixes2-for-v3.14' of ↵Olof Johansson1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Second Round of Renesas ARM Based SoC DT Fixes for v3.14 Correct i2c clock references for r8a7790 (R-Car H2) SoC The error was introduced in 72197ca7a1cb1cea5 ("ARM: shmobile: r8a7790: Reference clocks") which is queued up for v3.14. * tag 'renesas-dt-fixes2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHYFabio Estevam1-0/+1
Select CONFIG_AT803X_PHY so that we can boot hummingboard via NFS. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not setGrygorii Strashko2-1/+1
Drop automatic selection of TI_EDMA from Keystone Kconfig file, as it produces build warning in case if CONFIG_DMADEVICES is not set: warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE)) Instead enable TI EDMA support from defconfig. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31Merge tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson3-3/+50
mvebu fixes for v3.13 (incremental #2) - allow building and booting DT and non-DT plat-orion SoCs - catch proper return value for kirkwood_pm_init() - properly check return of of_iomap to solve boot hangs (mirabox, others) - remove a compile warning on Armada 370 with non-SMP. * tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed ARM: kirkwood: kirkwood_pm_init() should return void ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: dts: zynq: Add SDHCI nodesSoren Brinkmann4-0/+32
Add nodes for the Arasan SDHCI controller to Zynq dts files. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: hisi: don't select SMPRob Herring1-1/+0
SMP is a user configurable option, not a hardware feature and should not be selected. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: tegra: rebuild tegra_defconfig to add DEBUG_FSStephen Warren1-8/+3
DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled by tegra_defconfig. However, this config option no longer exists, so no longer selects DEBUG_FS, and nothing else selects it either. So, "make tegra_defconfig" no longer enables DEBUG_FS in .config. Rebuild tegra_defconfig on top of next-20140424, while manually re-enabling DEBUG_FS. Reasons for removed entries are: - I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT - DRM_PANEL: selected by DRM_TEGRA - NEW_LEDS: selected by many things; at least VT - LEDS_CLASS: selected by many things; at least VT - LEDS_TRIGGERS: selected by many things; at least VT - COMMON_CLK_DEBUG: no longer exists Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-31ARM: multi_v7: copy most options from tegra_defconfigStephen Warren1-11/+142
multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: iop32x: fix power off handling for the EM7210 boardLinus Walleij1-5/+27
This board was missed when converting all the others to proper abstracted GPIO handling. Fix it up the right way by requesting and driving GPIO line 0 high through gpiolib to power off the machine. Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: integrator: restore static map on the CPLinus Walleij1-0/+6
Commit 78d1632183454dba46ca8295484a5e7603acdc18 deleted the static mappings of the core modules, but this static map is still needed on the Integrator/CP (not the Integrator/AP). Restore the static map on the Integrator/CP. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: msm_defconfig: Enable MSM clock driversStephen Boyd1-0/+4
This allows us to probe the clock controller devices and boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: dts: msm: Add clock controller nodes and hook into uartStephen Boyd3-0/+53
Add the necessary DT nodes to probe the clock controllers on MSM devices as well as hook up the uart nodes to the clock controllers. This should allow us to boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: OMAP4+: move errata initialization to omap4_pm_init_earlyNishanth Menon4-5/+23
Move all OMAP4 PM errata initializations to centralized location in omap4_pm_init_early. This allows for users to utilize the erratas in various submodules as needed. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidleStrashko, Grygorii4-5/+31
The same workaround as ff999b8a0983ee15668394ed49e38d3568fc6859 "ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC ..." need to be applied not only when system is booting, but when MPUSS hits OSWR state through CPUIdle too. Without this WA the same issue is reproduced now on boards PandaES and Tablet/Blaze with SOM OMAP4460 when CONFIG_CPU_IDLE is enabled. After MPUSS has enterred OSWR and waken up: - GIC distributor became disabled forever - scheduling is not performed any more Cc: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31Merge tag 'arm64-upstream' of ↵Linus Torvalds8-43/+74
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pyll ARM64 patches from Catalin Marinas: - Build fix with DMA_CMA enabled - Introduction of PTE_WRITE to distinguish between writable but clean and truly read-only pages - FIQs enabling/disabling clean-up (they aren't used on arm64) - CPU resume fix for the per-cpu offset restoring - Code comment typos * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Introduce PTE_WRITE arm64: mm: Remove PTE_BIT_FUNC macro arm64: FIQs are unused arm64: mm: fix the function name in comment of cpu_do_switch_mm arm64: fix build error if DMA_CMA is enabled arm64: kernel: fix per-cpu offset restore on resume arm64: mm: fix the function name in comment of __flush_dcache_area arm64: mm: use ubfm for dcache_line_size
2014-01-31Merge branch 'for-linus' of ↵Linus Torvalds8-3/+87
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha updates from Matt Turner: "A pair of changes for alpha. One fixes a networking regression, and the second adds audit syscall support which will help in supporting systemd" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: fix broken network checksum alpha: Enable system-call auditing support.
2014-01-31Merge branch 'v4l_for_linus' of ↵Linus Torvalds3-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4) - a new dvb frontend for ds2103 chipset (m88ds2103) - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf) - new drivers for R-Car VSP1 - a new radio driver: radio-raremono - a new tuner driver for ts2022 chipset (m88ts2022) - the analog part of em28xx is now a separate module that only load/runs if the device is not a pure digital TV device - added a staging driver for bcm2048 radio devices - the omap 2 video driver (omap24xx) was moved to staging. This driver is for an old hardware and uses a deprecated Kernel internal API. If nobody cares enough to fix it, it would be removed on a couple Kernel releases - the sn9c102 driver was moved to staging. This driver was replaced by gspca, and disabled on some distros, as almost all devices are known to work properly with gspca. It should be removed from kernel on a couple Kernel releases - lots of driver fixes, improvements and cleanups * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits) [media] media: v4l2-dev: fix video device index assignment [media] rc-core: reuse device numbers [media] em28xx-cards: properly initialize the device bitmap [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c [media] Staging: media: Fix quoted string split across line in as102_fe.c [media] media: st-rc: Add reset support [media] m2m-deinterlace: fix allocated struct type [media] radio-usb-si4713: fix sparse non static symbol warnings [media] em28xx-audio: remove needless check before usb_free_coherent() [media] au0828: Fix sparse non static symbol warning Revert "[media] go7007-usb: only use go->dev after allocated" [media] em28xx-audio: provide an error code when URB submit fails [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0 [media] em28xx: make 'em28xx_ctrl_ops' static em28xx-alsa: Fix error patch for init/fini [media] em28xx-audio: flush work at .fini [media] drxk: remove the option to load firmware asynchronously [media] em28xx: adjust period size at runtime ...
2014-01-31alpha: fix broken network checksumMikulas Patocka1-2/+7
The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 breaks networking on alpha (there is a follow-up fix 5cfe8f1ba5eebe6f4b6e5858cdb1a5be4f3272a6, but networking is still broken even with the second patch). The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 makes csum_partial_copy_from_user check the pointer with access_ok. However, csum_partial_copy_from_user is called also from csum_partial_copy_nocheck and csum_partial_copy_nocheck is called on kernel pointers and it is supposed not to check pointer validity. This bug results in ssh session hangs if the system is loaded and bulk data are printed to ssh terminal. This patch fixes csum_partial_copy_nocheck to call set_fs(KERNEL_DS), so that access_ok in csum_partial_copy_from_user accepts kernel-space addresses. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Matt Turner <mattst88@gmail.com>
2014-01-31alpha: Enable system-call auditing support.蔡正龙7-1/+80
Signed-off-by: Zhenglong.cai <zhenglong.cai@cs2c.com.cn> Signed-off-by: Matt Turner <mattst88@gmail.com>
2014-01-31Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds3-22/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core debug changes from Ingo Molnar: "This contains mostly kernel debugging related updates: - make hung_task detection more configurable to distros - add final bits for x86 UV NMI debugging, with related KGDB changes - update the mailing-list of MAINTAINERS entries I'm involved with" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hung_task: Display every hung task warning sysctl: Add neg_one as a standard constraint x86/uv/nmi, kgdb/kdb: Fix UV NMI handler when KDB not configured x86/uv/nmi: Fix Sparse warnings kgdb/kdb: Fix no KDB config problem MAINTAINERS: Restore "L: linux-kernel@vger.kernel.org" entries
2014-01-31Merge tag 'stable/for-linus-3.14-rc0-late-tag' of ↵Linus Torvalds5-48/+55
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: "Bug-fixes for the new features that were added during this cycle. There are also two fixes for long-standing issues for which we have a solution: grant-table operations extra work that was not needed causing performance issues and the self balloon code was too aggressive causing OOMs. Details: - Xen ARM couldn't use the new FIFO events - Xen ARM couldn't use the SWIOTLB if compiled as 32-bit with 64-bit PCIe devices. - Grant table were doing needless M2P operations. - Ratchet down the self-balloon code so it won't OOM. - Fix misplaced kfree in Xen PVH error code paths" * tag 'stable/for-linus-3.14-rc0-late-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Fix misplaced kfree from xlated_setup_gnttab_pages drivers: xen: deaggressive selfballoon driver xen/grant-table: Avoid m2p_override during mapping xen/gnttab: Use phys_addr_t to describe the grant frame base address xen: swiotlb: handle sizeof(dma_addr_t) != sizeof(phys_addr_t) arm/xen: Initialize event channels earlier
2014-01-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds51-1109/+1694
Pull more KVM updates from Paolo Bonzini: "Second batch of KVM updates. Some minor x86 fixes, two s390 guest features that need some handling in the host, and all the PPC changes. The PPC changes include support for little-endian guests and enablement for new POWER8 features" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits) x86, kvm: correctly access the KVM_CPUID_FEATURES leaf at 0x40000101 x86, kvm: cache the base of the KVM cpuid leaves kvm: x86: move KVM_CAP_HYPERV_TIME outside #ifdef KVM: PPC: Book3S PR: Cope with doorbell interrupts KVM: PPC: Book3S HV: Add software abort codes for transactional memory KVM: PPC: Book3S HV: Add new state for transactional memory powerpc/Kconfig: Make TM select VSX and VMX KVM: PPC: Book3S HV: Basic little-endian guest support KVM: PPC: Book3S HV: Add support for DABRX register on POWER7 KVM: PPC: Book3S HV: Prepare for host using hypervisor doorbells KVM: PPC: Book3S HV: Handle new LPCR bits on POWER8 KVM: PPC: Book3S HV: Handle guest using doorbells for IPIs KVM: PPC: Book3S HV: Consolidate code that checks reason for wake from nap KVM: PPC: Book3S HV: Implement architecture compatibility modes for POWER8 KVM: PPC: Book3S HV: Add handler for HV facility unavailable KVM: PPC: Book3S HV: Flush the correct number of TLB sets on POWER8 KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs KVM: PPC: Book3S HV: Align physical and virtual CPU thread numbers KVM: PPC: Book3S HV: Don't set DABR on POWER8 kvm/ppc: IRQ disabling cleanup ...
2014-01-31xen/pvh: Fix misplaced kfree from xlated_setup_gnttab_pagesDave Jones1-1/+2
Passing a freed 'pages' to free_xenballooned_pages will end badly on kernels with slub debug enabled. This looks out of place between the rc assign and the check, but we do want to kfree pages regardless of which path we take. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-31xen/grant-table: Avoid m2p_override during mappingZoltan Kiss2-17/+5
The grant mapping API does m2p_override unnecessarily: only gntdev needs it, for blkback and future netback patches it just cause a lock contention, as those pages never go to userspace. Therefore this series does the following: - the original functions were renamed to __gnttab_[un]map_refs, with a new parameter m2p_override - based on m2p_override either they follow the original behaviour, or just set the private flag and call set_phys_to_machine - gnttab_[un]map_refs are now a wrapper to call __gnttab_[un]map_refs with m2p_override false - a new function gnttab_[un]map_refs_userspace provides the old behaviour It also removes a stray space from page.h and change ret to 0 if XENFEAT_auto_translated_physmap, as that is the only possible return value there. v2: - move the storing of the old mfn in page->index to gnttab_map_refs - move the function header update to a separate patch v3: - a new approach to retain old behaviour where it needed - squash the patches into one v4: - move out the common bits from m2p* functions, and pass pfn/mfn as parameter - clear page->private before doing anything with the page, so m2p_find_override won't race with this v5: - change return value handling in __gnttab_[un]map_refs - remove a stray space in page.h - add detail why ret = 0 now at some places v6: - don't pass pfn to m2p* functions, just get it locally Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Suggested-by: David Vrabel <david.vrabel@citrix.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-31arm64: mm: Introduce PTE_WRITESteve Capper1-23/+25
We have the following means for encoding writable or dirty ptes: PTE_DIRTY PTE_RDONLY !pte_dirty && !pte_write 0 1 !pte_dirty && pte_write 0 1 pte_dirty && !pte_write 1 1 pte_dirty && pte_write 1 0 So we can't distinguish between writable clean ptes and read only ptes. This can cause problems with ptes being incorrectly flagged as read only when they are writable but not dirty. This patch introduces a new software bit PTE_WRITE which allows us to correctly identify writable ptes. PTE_RDONLY is now only clear for valid ptes where a page is both writable and dirty. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-01-31arm64: mm: Remove PTE_BIT_FUNC macroSteve Capper1-10/+41
Expand out the pte manipulation functions. This makes our life easier when using things like tags and cscope. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-01-30Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds1-1/+2
Merge misc fixes from Andrew Morton: "A few hotfixes and various leftovers which were awaiting other merges. Mainly movement of zram into mm/" * emailed patches fron Andrew Morton <akpm@linux-foundation.org>: (25 commits) memcg: fix mutex not unlocked on memcg_create_kmem_cache fail path Documentation/filesystems/vfs.txt: update file_operations documentation mm, oom: base root bonus on current usage mm: don't lose the SOFT_DIRTY flag on mprotect mm/slub.c: fix page->_count corruption (again) mm/mempolicy.c: fix mempolicy printing in numa_maps zram: remove zram->lock in read path and change it with mutex zram: remove workqueue for freeing removed pending slot zram: introduce zram->tb_lock zram: use atomic operation for stat zram: remove unnecessary free zram: delay pending free request in read path zram: fix race between reset and flushing pending work zsmalloc: add maintainers zram: add zram maintainers zsmalloc: add copyright zram: add copyright zram: remove old private project comment zram: promote zram from staging zsmalloc: move it under mm ...
2014-01-30Merge branch 'x86-asmlinkage-for-linus' of ↵Linus Torvalds10-34/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asmlinkage (LTO) changes from Peter Anvin: "This patchset adds more infrastructure for link time optimization (LTO). This patchset was pulled into my tree late because of a miscommunication (part of the patchset was picked up by other maintainers). However, the patchset is strictly build-related and seems to be okay in testing" * 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, asmlinkage, xen: Fix type of NMI x86, asmlinkage, xen, kvm: Make {xen,kvm}_lock_spinning global and visible x86: Use inline assembler instead of global register variable to get sp x86, asmlinkage, paravirt: Make paravirt thunks global x86, asmlinkage, paravirt: Don't rely on local assembler labels x86, asmlinkage, lguest: Fix C functions used by inline assembler
2014-01-30Merge branch 'x86-build-for-linus' of ↵Linus Torvalds8-43/+91
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build bits from Peter Anvin: "Various build-related minor bits. Most of this is work by David Woodhouse to be able to compile the early boot code with clang/llvm; we have also managed to push an actual -m16 option into gcc 4.9 so this makes us use that option if available instead of hacking it. The balance is a patch from Michael Davidson to the relocs program to help manual debugging. None of these should change the actual compiled binary with currently released compilers" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, build: Build 16-bit code with -m16 where possible x86, boot: Fix word-size assumptions in has_eflag() inline asm x86, boot: Use __attribute__((used)) to ensure videocard structs are emitted x86: Remove duplication of 16-bit CFLAGS x86, relocs: Add manual debug mode
2014-01-30Merge tag 'late-dt-for-linus' of ↵Linus Torvalds5-11/+207
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late but were considered self-contained enough to still go in for v3.14. They are all device tree updtes this time around, and mainly for Broadcom SoCs" * tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: moxart: move fixed rate clock child node to board level dts clk: bcm281xx: define kona clock binding ARM: dts: add usb udc support to bcm281xx ARM: dts: Specify clocks for timer on bcm11351 Documentation: dt: kona-timer: Add clocks property ARM: dts: Specify clocks for SDHCIs on bcm11351 Documentation: dt: kona-sdhci: Add clocks property ARM: dts: Specify clocks for UARTs on bcm11351 ARM: dts: bcm281xx: Add i2c busses ARM: dts: Declare clocks as fixed on bcm11351 ARM: dts: bcm28155-ap: Enable all the i2c busses
2014-01-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds215-3287/+6077
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 12:35:34 +0000