summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)AuthorFilesLines
2013-05-31Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds5-15/+83
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: - Three EFI-related fixes - Two early memory initialization fixes - build fix for older binutils - fix for an eager FPU performance regression -- currently we don't allow the use of the FPU at interrupt time *at all* in eager mode, which is clearly wrong. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Allow FPU to be used at interrupt time even with eagerfpu x86, crc32-pclmul: Fix build with older binutils x86-64, init: Fix a possible wraparound bug in switchover in head_64.S x86, range: fix missing merge during add range x86, efi: initial the local variable of DataSize to zero efivar: fix oops in efivar_update_sysfs_entries() caused by memory reuse efivarfs: Never return ENOENT from firmware again
2013-05-30x86: Allow FPU to be used at interrupt time even with eagerfpuPekka Riikonen1-9/+5
With the addition of eagerfpu the irq_fpu_usable() now returns false negatives especially in the case of ksoftirqd and interrupted idle task, two common cases for FPU use for example in networking/crypto. With eagerfpu=off FPU use is possible in those contexts. This is because of the eagerfpu check in interrupted_kernel_fpu_idle(): ... * For now, with eagerfpu we will return interrupted kernel FPU * state as not-idle. TBD: Ideally we can change the return value * to something like __thread_has_fpu(current). But we need to * be careful of doing __thread_clear_has_fpu() before saving * the FPU etc for supporting nested uses etc. For now, take * the simple route! ... if (use_eager_fpu()) return 0; As eagerfpu is automatically "on" on those CPUs that also have the features like AES-NI this patch changes the eagerfpu check to return 1 in case the kernel_fpu_begin() has not been said yet. Once it has been the __thread_has_fpu() will start returning 0. Notice that with eagerfpu the __thread_has_fpu is always true initially. FPU use is thus always possible no matter what task is under us, unless the state has already been saved with kernel_fpu_begin(). [ hpa: this is a performance regression, not a correctness regression, but since it can be quite serious on CPUs which need encryption at interrupt time I am marking this for urgent/stable. ] Signed-off-by: Pekka Riikonen <priikone@iki.fi> Link: http://lkml.kernel.org/r/alpine.GSO.2.00.1305131356320.18@git.silcnet.org Cc: <stable@vger.kernel.org> v3.7+ Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-30x86, crc32-pclmul: Fix build with older binutilsJan Beulich2-3/+73
binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko <alexander_boyko@xyratex.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-31Merge tag 'stable/for-linus-3.10-rc3-tag' of ↵Linus Torvalds2-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - Use proper error paths - Clean up APIC IPI usage (incorrect arguments) - Delay XenBus frontend resume is backend (xenstored) is not running - Fix build error with various combinations of CONFIG_ * tag 'stable/for-linus-3.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvm xen-pciback: more uses of cached MSI-X capability offset xen: Clean up apic ipi interface xenbus: save xenstore local status for later use xenbus: delay xenbus frontend resume if xenstored is not running xmem/tmem: fix 'undefined variable' build error.
2013-05-29xen: Clean up apic ipi interfaceStefan Bader2-7/+4
Commit f447d56d36af18c5104ff29dcb1327c0c0ac3634 introduced the implementation of the PV apic ipi interface. But there were some odd things (it seems none of which cause really any issue but maybe they should be cleaned up anyway): - xen_send_IPI_mask_allbutself (and by that xen_send_IPI_allbutself) ignore the passed in vector and only use the CALL_FUNCTION_SINGLE vector. While xen_send_IPI_all and xen_send_IPI_mask use the vector. - physflat_send_IPI_allbutself is declared unnecessarily. It is never used. This patch tries to clean up those things. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-28x86-64, init: Fix a possible wraparound bug in switchover in head_64.SZhang Yanfei1-2/+4
In head_64.S, a switchover has been used to handle kernel crossing 1G, 512G boundaries. And commit 8170e6bed465b4b0c7687f93e9948aca4358a33b x86, 64bit: Use a #PF handler to materialize early mappings on demand said: During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. But from the switchover code, when we set up the PUD table: 114 addq $4096, %rdx 115 movq %rdi, %rax 116 shrq $PUD_SHIFT, %rax 117 andl $(PTRS_PER_PUD-1), %eax 118 movq %rdx, (4096+0)(%rbx,%rax,8) 119 movq %rdx, (4096+8)(%rbx,%rax,8) It seems line 119 has a potential bug there. For example, if the kernel is loaded at physical address 511G+1008M, that is 000000000 111111111 111111000 000000000000000000000 and the kernel _end is 512G+2M, that is 000000001 000000000 000000001 000000000000000000000 So in this example, when using the 2nd page to setup PUD (line 114~119), rax is 511. In line 118, we put rdx which is the address of the PMD page (the 3rd page) into entry 511 of the PUD table. But in line 119, the entry we calculate from (4096+8)(%rbx,%rax,8) has exceeded the PUD page. IMO, the entry in line 119 should be wraparound into entry 0 of the PUD table. The patch fixes the bug. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Link: http://lkml.kernel.org/r/5191DE5A.3020302@cn.fujitsu.com Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2-2/+2
Pull crypto fixes from Herbert Xu: "This push fixes a crash in the new sha256_ssse3 driver as well as a DMA setup/teardown bug in caam" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations crypto: caam - fix inconsistent assoc dma mapping direction
2013-05-28crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementationsJussi Kivilinna2-2/+2
The _XFER stack element size was set too small, 8 bytes, when it needs to be 16 bytes. As _XFER is the last stack element used by these implementations, the 16 byte stores with 'movdqa' corrupt the stack where the value of register %r12 is temporarily stored. As these implementations align the stack pointer to 16 bytes, this corruption did not happen every time. Patch corrects this issue. Reported-by: Julian Wollrath <jwollrath@web.de> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Tested-by: Julian Wollrath <jwollrath@web.de> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-05-23Merge tag 'pci-v3.10-fixes-2' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Here are some more fixes for v3.10. The Moorestown update broke Intel Medfield devices, so I reverted it. The acpiphp change fixes a regression: we broke hotplug notifications to host bridges when we split acpiphp into the host-bridge related part and the endpoint-related part. Moorestown Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" Hotplug PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check" * tag 'pci-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check
2013-05-22Merge tag 'efi-urgent' into x86/urgentH. Peter Anvin1-1/+1
* Avoid confusing the user by returning -EIO instead of -ENOENT in efivarfs if an EFI variable gets deleted from under us and return EOF when reading from a zero-length file - Lingzhu Xiang * Fix an oops in efivar_update_sysfs_entries() caused by reusing (and therefore corrupting) a kzalloc() allocation - Seiji Aguchi * Initialise the DataSize argument to GetVariable() otherwise it will not be updated with the actual size of the variable on return. Discovered on a Acer Aspire V3 BIOS - Lee, Chun-Yi Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-20x86: Fix bit corruption at CPU resume timeLinus Torvalds1-1/+1
In commit 78d77df71510 ("x86-64, init: Do not set NX bits on non-NX capable hardware") we added the early_pmd_flags that gets the NX bit set when a CPU supports NX. However, the new variable was marked __initdata, because the main _use_ of this is in an __init routine. However, the bit setting happens from secondary_startup_64(), which is called not only at bootup, but on every secondary CPU start. Including resuming from STR and at CPU hotplug time. So the value cannot be __initdata. Reported-bisected-and-tested-by: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org # v3.9 Acked-by: Peter Anvin <hpa@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-20Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, ↵Bjorn Helgaas1-6/+4
00:03.0" This reverts commit dd72be99d11dbf738d910a38479ce414a51eb21e. Andy Shevchenko <andy.shevchenko@gmail.com> reported that this commit broke Intel Medfield devices. Reference: https://lkml.kernel.org/r/CAHp75Vdf6gFZChS47=grUygHBDWcoOWDYPzw+Zj5bdVCWj85Jw@mail.gmail.com Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-6/+23
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - Fix for a CPU hot-add deadlock in microcode update code - Fix for idle consolidation fallout - Documentation update for initial kernel direct mapping * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Add missing comments for initial kernel direct mapping x86/microcode: Add local mutex to fix physical CPU hot-add deadlock x86: Fix idle consolidation fallout
2013-05-15Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: - Cure for not using zalloc in the first place, which leads to random crashes with CPUMASK_OFF_STACK. - Revert a user space visible change which broke udev - Add a missing cpu_online early return introduced by the new full dyntick conversions - Plug a long standing race in the timer wheel cpu hotplug code. Sigh... - Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu up. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline tick: Cleanup NOHZ per cpu data on cpu down tick: Use zalloc_cpumask_var for allocating offstack cpumasks
2013-05-14time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitonsJohn Stultz1-1/+0
Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config, which enables some minor compile time optimization to avoid uncessary code in mostly the suspend/resume path could cause problems for userland. In particular, the dependency for RTC_HCTOSYS on !ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time twice and simplifies suspend/resume, has the side effect of causing the /sys/class/rtc/rtcN/hctosys flag to always be zero, and this flag is commonly used by udev to setup the /dev/rtc symlink to /dev/rtcN, which can cause pain for older applications. While the udev rules could use some work to be less fragile, breaking userland should strongly be avoided. Additionally the compile time optimizations are fairly minor, and the code being optimized is likely to be reworked in the future, so lets revert this change. Reported-by: Kay Sievers <kay@vrfy.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: stable <stable@vger.kernel.org> #3.9 Cc: Feng Tang <feng.tang@intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-14x86, efi: initial the local variable of DataSize to zeroLee, Chun-Yi1-1/+1
That will be better initial the value of DataSize to zero for the input of GetVariable(), otherwise we will feed a random value. The debug log of input DataSize like this: ... [ 195.915612] EFI Variables Facility v0.08 2004-May-17 [ 195.915819] efi: size: 18446744071581821342 [ 195.915969] efi: size': 18446744071581821342 [ 195.916324] efi: size: 18446612150714306560 [ 195.916632] efi: size': 18446612150714306560 [ 195.917159] efi: size: 18446612150714306560 [ 195.917453] efi: size': 18446612150714306560 ... The size' is value that was returned by BIOS. After applied this patch: [ 82.442042] EFI Variables Facility v0.08 2004-May-17 [ 82.442202] efi: size: 0 [ 82.442360] efi: size': 1039 [ 82.443828] efi: size: 0 [ 82.444127] efi: size': 2616 [ 82.447057] efi: size: 0 [ 82.447356] efi: size': 5832 ... Found on Acer Aspire V3 BIOS, it will not return the size of data if we input a non-zero DataSize. Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-05-11Merge tag 'stable/for-linus-3.10-rc0-tag-two' of ↵Linus Torvalds3-5/+52
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - More fixes in the vCPU PVHVM hotplug path. - Add more documentation. - Fix various ARM related issues in the Xen generic drivers. - Updates in the xen-pciback driver per Bjorn's updates. - Mask the x2APIC feature for PV guests. * tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Used cached MSI-X capability offset xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen: mask x2APIC feature in PV xen: SWIOTLB is only used on x86 xen/spinlock: Fix check from greater than to be also be greater or equal to. xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info xen/vcpu: Document the xen_vcpu_info and xen_vcpu xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
2013-05-11Merge branch 'release' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull idle update from Len Brown: "Add support for new Haswell-ULT CPU idle power states" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: initial C8, C9, C10 support tools/power turbostat: display C8, C9, C10 residency
2013-05-10Merge branch 'for-linus' of ↵Linus Torvalds5-39/+17
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull stray syscall bits from Al Viro: "Several syscall-related commits that were missing from the original" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE unicore32: just use mmap_pgoff()... unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
2013-05-10Merge tag 'kvm-3.10-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-21/+67
Pull kvm fixes from Gleb Natapov: "Most of the fixes are in the emulator since now we emulate more than we did before for correctness sake we see more bugs there, but there is also an OOPS fixed and corruption of xcr0 register." * tag 'kvm-3.10-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: emulator: emulate SALC KVM: emulator: emulate XLAT KVM: emulator: emulate AAM KVM: VMX: fix halt emulation while emulating invalid guest sate KVM: Fix kvm_irqfd_init initialization KVM: x86: fix maintenance of guest/host xcr0 state
2013-05-10xen/pci: Used cached MSI-X capability offsetBjorn Helgaas1-2/+1
We now cache the MSI-X capability offset in the struct pci_dev, so no need to find the capability again. Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-10xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASKBjorn Helgaas1-1/+1
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the Table Offset register, not the flags ("Message Control" per spec) register. Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-10x86/mm: Add missing comments for initial kernel direct mappingZhang Yanfei1-1/+18
Two sets of comments were lost during patch-series shuffling: - comments for init_range_memory_mapping() - comments in init_mem_mapping that is helpful for reminding people that the pagetable is setup top-down The comments were written by Yinghai in his patch in: https://lkml.org/lkml/2012/11/28/620 This patch reintroduces them. Originally-From: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/518BC776.7010506@gmail.com [ Tidied it all up a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-09unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINEAl Viro3-13/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-09Merge tag 'pci-v3.10-fixes-1' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "MSI: PCI: Set ->mask_pos correctly Hotplug: PCI: Delay final fixups until resources are assigned Moorestown: x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" * tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Delay final fixups until resources are assigned x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0 PCI: Set ->mask_pos correctly
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-3/+0
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-09KVM: emulator: emulate SALCPaolo Bonzini1-1/+5
This is an almost-undocumented instruction available in 32-bit mode. I say "almost" undocumented because AMD documents it in their opcode maps just to say that it is unavailable in 64-bit mode (sections "A.2.1 One-Byte Opcodes" and "B.3 Invalid and Reassigned Instructions in 64-Bit Mode"). It is roughly equivalent to "sbb %al, %al" except it does not set the flags. Use fastop to emulate it, but do not use the opcode directly because it would fail if the host is 64-bit! Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-09KVM: emulator: emulate XLATPaolo Bonzini1-1/+14
This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1. It is just a MOV in disguise, with a funny source address. Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-09KVM: emulator: emulate AAMPaolo Bonzini1-1/+24
This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1. AAM needs the source operand to be unsigned; do the same in AAD as well for consistency, even though it does not affect the result. Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-09x86/microcode: Add local mutex to fix physical CPU hot-add deadlockKonrad Rzeszutek Wilk1-2/+3
This can easily be triggered if a new CPU is added (via ACPI hotplug mechanism) and from user-space you do: echo 1 > /sys/devices/system/cpu/cpu3/online (or wait for UDEV to do it) on a newly appeared physical CPU. The deadlock is that the "store_online" in drivers/base/cpu.c takes the cpu_hotplug_driver_lock() lock, then calls "cpu_up". "cpu_up" eventually ends up calling "save_mc_for_early" which also takes the cpu_hotplug_driver_lock() lock. And here is that lockdep thinks of it: smpboot: Stack at about ffff880075c39f44 smpboot: CPU3: has booted. microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25 ============================================= [ INFO: possible recursive locking detected ] 3.9.0upstream-10129-g167af0e #1 Not tainted --------------------------------------------- sh/2487 is trying to acquire lock: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81075512>] cpu_hotplug_driver_lock+0x12/0x20 but task is already holding lock: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81075512>] cpu_hotplug_driver_lock+0x12/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(x86_cpu_hotplug_driver_mutex); lock(x86_cpu_hotplug_driver_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/2487: #0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ca48d>] vfs_write+0x17d/0x190 #1: (&buffer->mutex){+.+.+.}, at: [<ffffffff812464ef>] sysfs_write_file+0x3f/0x160 #2: (s_active#20){.+.+.+}, at: [<ffffffff81246578>] sysfs_write_file+0xc8/0x160 #3: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81075512>] cpu_hotplug_driver_lock+0x12/0x20 #4: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff810961c2>] cpu_maps_update_begin+0x12/0x20 #5: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff810962a7>] cpu_hotplug_begin+0x27/0x60 Suggested-and-Acked-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: fenghua.yu@intel.com Cc: xen-devel@lists.xensource.com Cc: stable@vger.kernel.org # for v3.9 Link: http://lkml.kernel.org/r/1368029583-23337-1-git-send-email-konrad.wilk@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-09KVM: VMX: fix halt emulation while emulating invalid guest sateGleb Natapov1-0/+6
The invalid guest state emulation loop does not check halt_request which causes 100% cpu loop while guest is in halt and in invalid state, but more serious issue is that this leaves halt_request set, so random instruction emulated by vm86 #GP exit can be interpreted as halt which causes guest hang. Fix both problems by handling halt_request in emulation loop. Reported-by: Tomas Papan <tomas.papan@gmail.com> Tested-by: Tomas Papan <tomas.papan@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> CC: stable@vger.kernel.org Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-08xen: mask x2APIC feature in PVZhenzhong Duan1-0/+3
On x2apic enabled pvm, doing sysrq+l, got NULL pointer dereference as below. SysRq : Show backtrace of all active CPUs BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8125e3cb>] memcpy+0xb/0x120 Call Trace: [<ffffffff81039633>] ? __x2apic_send_IPI_mask+0x73/0x160 [<ffffffff8103973e>] x2apic_send_IPI_all+0x1e/0x20 [<ffffffff8103498c>] arch_trigger_all_cpu_backtrace+0x6c/0xb0 [<ffffffff81501be4>] ? _raw_spin_lock_irqsave+0x34/0x50 [<ffffffff8131654e>] sysrq_handle_showallcpus+0xe/0x10 [<ffffffff8131616d>] __handle_sysrq+0x7d/0x140 [<ffffffff81316230>] ? __handle_sysrq+0x140/0x140 [<ffffffff81316287>] write_sysrq_trigger+0x57/0x60 [<ffffffff811ca996>] proc_reg_write+0x86/0xc0 [<ffffffff8116dd8e>] vfs_write+0xce/0x190 [<ffffffff8116e3e5>] sys_write+0x55/0x90 [<ffffffff8150a242>] system_call_fastpath+0x16/0x1b That's because apic points to apic_x2apic_cluster or apic_x2apic_phys but the basic element like cpumask isn't initialized. Mask x2APIC feature in pvm to avoid overwrite of apic pointer, update commit message per Konrad's suggestion. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Tested-by: Tamon Shiose <tamon.shiose@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-08xen/spinlock: Fix check from greater than to be also be greater or equal to.Konrad Rzeszutek Wilk1-1/+1
During review of git commit cb9c6f15f318aa3aeb62fe525aa5c6dcf6eee159 ("xen/spinlock: Check against default value of -1 for IRQ line.") Stefano pointed out a bug in the patch. Unfortunatly due to vacation timing the fix was not applied and this patch fixes it up. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-08xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_infoKonrad Rzeszutek Wilk1-0/+3
As it will point to some data, but not event channel data (the shared_info has an array limited to 32). This means that for PVHVM guests with more than 32 VCPUs without the usage of VCPUOP_register_info any interrupts to VCPUs larger than 32 would have gone unnoticed during early bootup. That is OK, as during early bootup, in smp_init we end up calling the hotplug mechanism (xen_hvm_cpu_notify) which makes the VCPUOP_register_vcpu_info call for all VCPUs and we can receive interrupts on VCPUs 33 and further. This is just a cleanup. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-08KVM: x86: fix maintenance of guest/host xcr0 stateMarcelo Tosatti1-20/+20
Emulation of xcr0 writes zero guest_xcr0_loaded variable so that subsequent VM-entry reloads CPU's xcr0 with guests xcr0 value. However, this is incorrect because guest_xcr0_loaded variable is read to decide whether to reload hosts xcr0. In case the vcpu thread is scheduled out after the guest_xcr0_loaded = 0 assignment, and scheduler decides to preload FPU: switch_to { __switch_to __math_state_restore restore_fpu_checking fpu_restore_checking if (use_xsave()) fpu_xrstor_checking xrstor64 with CPU's xcr0 == guests xcr0 Fix by properly restoring hosts xcr0 during emulation of xcr0 writes. Analyzed-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-07Merge branch 'rwsem-optimizations'Linus Torvalds1-7/+21
Merge rwsem optimizations from Michel Lespinasse: "These patches extend Alex Shi's work (which added write lock stealing on the rwsem slow path) in order to provide rwsem write lock stealing on the fast path (that is, without taking the rwsem's wait_lock). I have unfortunately been unable to push this through -next before due to Ingo Molnar / David Howells / Peter Zijlstra being busy with other things. However, this has gotten some attention from Rik van Riel and Davidlohr Bueso who both commented that they felt this was ready for v3.10, and Ingo Molnar has said that he was OK with me pushing directly to you. So, here goes :) Davidlohr got the following test results from pgbench running on a quad-core laptop: | db_size | clients | tps-vanilla | tps-rwsem | +---------+----------+----------------+--------------+ | 160 MB | 1 | 5803 | 6906 | + 19.0% | 160 MB | 2 | 13092 | 15931 | | 160 MB | 4 | 29412 | 33021 | | 160 MB | 8 | 32448 | 34626 | | 160 MB | 16 | 32758 | 33098 | | 160 MB | 20 | 26940 | 31343 | + 16.3% | 160 MB | 30 | 25147 | 28961 | | 160 MB | 40 | 25484 | 26902 | | 160 MB | 50 | 24528 | 25760 | ------------------------------------------------------ | 1.6 GB | 1 | 5733 | 7729 | + 34.8% | 1.6 GB | 2 | 9411 | 19009 | + 101.9% | 1.6 GB | 4 | 31818 | 33185 | | 1.6 GB | 8 | 33700 | 34550 | | 1.6 GB | 16 | 32751 | 33079 | | 1.6 GB | 20 | 30919 | 31494 | | 1.6 GB | 30 | 28540 | 28535 | | 1.6 GB | 40 | 26380 | 27054 | | 1.6 GB | 50 | 25241 | 25591 | ------------------------------------------------------ | 7.6 GB | 1 | 5779 | 6224 | | 7.6 GB | 2 | 10897 | 13611 | + 24.9% | 7.6 GB | 4 | 32683 | 33108 | | 7.6 GB | 8 | 33968 | 34712 | | 7.6 GB | 16 | 32287 | 32895 | | 7.6 GB | 20 | 27770 | 31689 | + 14.1% | 7.6 GB | 30 | 26739 | 29003 | | 7.6 GB | 40 | 24901 | 26683 | | 7.6 GB | 50 | 17115 | 25925 | + 51.5% ------------------------------------------------------ (Davidlohr also has one additional patch which further improves throughput, though I will ask him to send it directly to you as I have suggested some minor changes)." * emailed patches from Michel Lespinasse <walken@google.com>: rwsem: no need for explicit signed longs x86 rwsem: avoid taking slow path when stealing write lock rwsem: do not block readers at head of queue if other readers are active rwsem: implement support for write lock stealing on the fastpath rwsem: simplify __rwsem_do_wake rwsem: skip initial trylock in rwsem_down_write_failed rwsem: avoid taking wait_lock in rwsem_down_write_failed rwsem: use cmpxchg for trying to steal write lock rwsem: more agressive lock stealing in rwsem_down_write_failed rwsem: simplify rwsem_down_write_failed rwsem: simplify rwsem_down_read_failed rwsem: move rwsem_down_failed_common code into rwsem_down_{read,write}_failed rwsem: shorter spinlocked section in rwsem_down_failed_common() rwsem: make the waiter type an enumeration rather than a bitmask
2013-05-07x86: Fix idle consolidation falloutThomas Gleixner1-3/+2
The core code expects the arch idle code to return with interrupts enabled. The conversion missed two x86 cases which fail to do that. Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Tested-by: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305021557030.3972@ionos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-07x86 rwsem: avoid taking slow path when stealing write lockMichel Lespinasse1-7/+21
modify __down_write[_nested] and __down_write_trylock to grab the write lock whenever the active count is 0, even if there are queued waiters (they must be writers pending wakeup, since the active count is 0). Note that this is an optimization only; architectures without this optimization will still work fine: - __down_write() would take the slow path which would take the wait_lock and then try stealing the lock (as in the spinlocked rwsem implementation) - __down_write_trylock() would fail, but callers must be ready to deal with that - since there are some writers pending wakeup, they could have raced with us and obtained the lock before we steal it. Signed-off-by: Michel Lespinasse <walken@google.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07xen/vcpu: Document the xen_vcpu_info and xen_vcpuKonrad Rzeszutek Wilk1-1/+28
They are important structures and it is not clear at first look what they are for. The xen_vcpu is a pointer. By default it points to the shared_info structure (at the CPU offset location). However if the VCPUOP_register_vcpu_info hypercall is implemented we can make the xen_vcpu pointer point to a per-CPU location. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> [v1: Added comments from Ian Campbell] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-06Merge tag 'iommu-updates-v3.10' of ↵Linus Torvalds2-0/+29
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "The updates are mostly about the x86 IOMMUs this time. Exceptions are the groundwork for the PAMU IOMMU from Freescale (for a PPC platform) and an extension to the IOMMU group interface. On the x86 side this includes a workaround for VT-d to disable interrupt remapping on broken chipsets. On the AMD-Vi side the most important new feature is a kernel command-line interface to override broken information in IVRS ACPI tables and get interrupt remapping working this way. Besides that there are small fixes all over the place." * tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (24 commits) iommu/tegra: Fix printk formats for dma_addr_t iommu: Add a function to find an iommu group by id iommu/vt-d: Remove warning for HPET scope type iommu: Move swap_pci_ref function to drivers/iommu/pci.h. iommu/vt-d: Disable translation if already enabled iommu/amd: fix error return code in early_amd_iommu_init() iommu/AMD: Per-thread IOMMU Interrupt Handling iommu: Include linux/err.h iommu/amd: Workaround for ERBT1312 iommu/amd: Document ivrs_ioapic and ivrs_hpet parameters iommu/amd: Don't report firmware bugs with cmd-line ivrs overrides iommu/amd: Add ioapic and hpet ivrs override iommu/amd: Add early maps for ioapic and hpet iommu/amd: Extend IVRS special device data structure iommu/amd: Move add_special_device() to __init iommu: Fix compile warnings with forward declarations iommu/amd: Properly initialize irq-table lock iommu/amd: Use AMD specific data structure for irq remapping iommu/amd: Remove map_sg_no_iommu() iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets ...
2013-05-06xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.Konrad Rzeszutek Wilk1-0/+15
If a user did: echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online we would (this a build with DEBUG enabled) get to: smpboot: ++++++++++++++++++++=_---CPU UP 1 .. snip.. smpboot: Stack at about ffff880074c0ff44 smpboot: CPU1: has booted. and hang. The RCU mechanism would kick in an try to IPI the CPU1 but the IPIs (and all other interrupts) would never arrive at the CPU1. At first glance at least. A bit digging in the hypervisor trace shows that (using xenanalyze): [vla] d4v1 vec 243 injecting 0.043163027 --|x d4v1 intr_window vec 243 src 5(vector) intr f3 ] 0.043163639 --|x d4v1 vmentry cycles 1468 ] 0.043164913 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254 0.043164913 --|x d4v1 inj_virq vec 243 real [vla] d4v1 vec 243 injecting 0.043164913 --|x d4v1 intr_window vec 243 src 5(vector) intr f3 ] 0.043165526 --|x d4v1 vmentry cycles 1472 ] 0.043166800 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254 0.043166800 --|x d4v1 inj_virq vec 243 real [vla] d4v1 vec 243 injecting there is a pending event (subsequent debugging shows it is the IPI from the VCPU0 when smpboot.c on VCPU1 has done "set_cpu_online(smp_processor_id(), true)") and the guest VCPU1 is interrupted with the callback IPI (0xf3 aka 243) which ends up calling __xen_evtchn_do_upcall. The __xen_evtchn_do_upcall seems to do *something* but not acknowledge the pending events. And the moment the guest does a 'cli' (that is the ffffffff81673254 in the log above) the hypervisor is invoked again to inject the IPI (0xf3) to tell the guest it has pending interrupts. This repeats itself forever. The culprit was the per_cpu(xen_vcpu, cpu) pointer. At the bootup we set each per_cpu(xen_vcpu, cpu) to point to the shared_info->vcpu_info[vcpu] but later on use the VCPUOP_register_vcpu_info to register per-CPU structures (xen_vcpu_setup). This is used to allow events for more than 32 VCPUs and for performance optimizations reasons. When the user performs the VCPU hotplug we end up calling the the xen_vcpu_setup once more. We make the hypercall which returns -EINVAL as it does not allow multiple registration calls (and already has re-assigned where the events are being set). We pick the fallback case and set per_cpu(xen_vcpu, cpu) to point to the shared_info->vcpu_info[vcpu] (which is a good fallback during bootup). However the hypervisor is still setting events in the register per-cpu structure (per_cpu(xen_vcpu_info, cpu)). As such when the events are set by the hypervisor (such as timer one), and when we iterate in __xen_evtchn_do_upcall we end up reading stale events from the shared_info->vcpu_info[vcpu] instead of the per_cpu(xen_vcpu_info, cpu) structures. Hence we never acknowledge the events that the hypervisor has set and the hypervisor keeps on reminding us to ack the events which we never do. The fix is simple. Don't on the second time when xen_vcpu_setup is called over-write the per_cpu(xen_vcpu, cpu) if it points to per_cpu(xen_vcpu_info). Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> CC: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-05Merge tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds26-521/+1344
Pull kvm updates from Gleb Natapov: "Highlights of the updates are: general: - new emulated device API - legacy device assignment is now optional - irqfd interface is more generic and can be shared between arches x86: - VMCS shadow support and other nested VMX improvements - APIC virtualization and Posted Interrupt hardware support - Optimize mmio spte zapping ppc: - BookE: in-kernel MPIC emulation with irqfd support - Book3S: in-kernel XICS emulation (incomplete) - Book3S: HV: migration fixes - BookE: more debug support preparation - BookE: e6500 support ARM: - reworking of Hyp idmaps s390: - ioeventfd for virtio-ccw And many other bug fixes, cleanups and improvements" * tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) kvm: Add compat_ioctl for device control API KVM: x86: Account for failing enable_irq_window for NMI window request KVM: PPC: Book3S: Add API for in-kernel XICS emulation kvm/ppc/mpic: fix missing unlock in set_base_addr() kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write kvm/ppc/mpic: remove users kvm/ppc/mpic: fix mmio region lists when multiple guests used kvm/ppc/mpic: remove default routes from documentation kvm: KVM_CAP_IOMMU only available with device assignment ARM: KVM: iterate over all CPUs for CPU compatibility check KVM: ARM: Fix spelling in error message ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally KVM: ARM: Fix API documentation for ONE_REG encoding ARM: KVM: promote vfp_host pointer to generic host cpu context ARM: KVM: add architecture specific hook for capabilities ARM: KVM: perform HYP initilization for hotplugged CPUs ARM: KVM: switch to a dual-step HYP init code ARM: KVM: rework HYP page table freeing ARM: KVM: enforce maximum size for identity mapped code ARM: KVM: move to a KVM provided HYP idmap ...
2013-05-05Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-22/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes plus a small hw-enablement patch for Intel IB model 58 uncore events" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL perf/x86/intel/lbr: Fix LBR filter perf/x86: Blacklist all MEM_*_RETIRED events for Ivy Bridge perf: Fix vmalloc ring buffer pages handling perf/x86/intel: Fix unintended variable name reuse perf/x86/intel: Add support for IvyBridge model 58 Uncore perf/x86/intel: Fix typo in perf_event_intel_uncore.c x86: Eliminate irq_mis_count counted in arch_irq_stat
2013-05-05perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNELPeter Zijlstra1-3/+10
We should always have proper privileges when requesting kernel data. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: eranian@google.com Link: http://lkml.kernel.org/r/20130503121256.230745028@chello.nl [ Fix build error reported by fengguang.wu@intel.com, propagate error code back. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/n/tip-v0x9ky3ahzr6nm3c6ilwrili@git.kernel.org
2013-05-04perf/x86/intel/lbr: Fix LBR filterPeter Zijlstra1-2/+12
The LBR 'from' adddress is under full userspace control; ensure we validate it before reading from it. Note: is_module_text_address() can potentially be quite expensive; for those running into that with high overhead in modules optimize it using an RCU backed rb-tree. Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> Cc: eranian@google.com Link: http://lkml.kernel.org/r/20130503121256.158211806@chello.nl Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/n/tip-mk8i82ffzax01cnqo829iy1q@git.kernel.org
2013-05-04perf/x86: Blacklist all MEM_*_RETIRED events for Ivy BridgePeter Zijlstra1-4/+9
Errata BV98 states that all MEM_*_RETIRED events corrupt the counter value of the SMT sibling's counters. Blacklist these events Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> Cc: eranian@google.com Link: http://lkml.kernel.org/r/20130503121256.083340271@chello.nl Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/n/tip-jwra43mujrv1oq9xk6mfe57v@git.kernel.org
2013-05-02KVM: x86: Account for failing enable_irq_window for NMI window requestJan Kiszka4-13/+13
With VMX, enable_irq_window can now return -EBUSY, in which case an immediate exit shall be requested before entering the guest. Account for this also in enable_nmi_window which uses enable_irq_window in absence of vnmi support, e.g. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-05-02x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)Alexander van Heukelum2-26/+16
Commit 49cb25e9290 x86: 'get rid of pt_regs argument in vm86/vm86old' got rid of the pt_regs stub for sys_vm86old and sys_vm86. The functions were, however, not changed to use the calling convention for syscalls. [AV: killed asmlinkage_protect() - it's done automatically now] Reported-and-tested-by: Hans de Bruin <jmdebruin@xmsnet.nl> Cc: stable@vger.kernel.org Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds39-232/+10756
Pull crypto update from Herbert Xu: - XTS mode optimisation for twofish/cast6/camellia/aes on x86 - AVX2/x86_64 implementation for blowfish/twofish/serpent/camellia - SSSE3/AVX/AVX2 optimisations for sha256/sha512 - Added driver for SAHARA2 crypto accelerator - Fix for GMAC when used in non-IPsec secnarios - Added generic CMAC implementation (including IPsec glue) - IP update for crypto/atmel - Support for more than one device in hwrng/timeriomem - Added Broadcom BCM2835 RNG driver - Misc fixes * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (59 commits) crypto: caam - fix job ring cleanup code crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher crypto: tcrypt - add async cipher speed tests for blowfish crypto: testmgr - extend camellia test-vectors for camellia-aesni/avx2 crypto: aesni_intel - fix Kconfig problem with CRYPTO_GLUE_HELPER_X86 crypto: aesni_intel - add more optimized XTS mode for x86-64 crypto: x86/camellia-aesni-avx - add more optimized XTS code crypto: cast6-avx: use new optimized XTS code crypto: x86/twofish-avx - use optimized XTS code crypto: x86 - add more optimized XTS-mode for serpent-avx xfrm: add rfc4494 AES-CMAC-96 support crypto: add CMAC support to CryptoAPI crypto: testmgr - add empty test vectors for null ciphers crypto: testmgr - add AES GMAC test vectors crypto: gcm - fix rfc4543 to handle async crypto correctly crypto: gcm - make GMAC work when dst and src are different hwrng: timeriomem - added devicetree hooks ...
2013-05-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds9-6/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Two regression fixes: 1. On 64 bits, we would set NX on non-NX-capable hardware (very rare in 64-bit land, but a nonzero subset.) 2. Fix suspend/resume across kernel versions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, init: Do not set NX bits on non-NX capable hardware x86, gdt, hibernate: Store/load GDT for hibernate path.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 17:48:26 +0000