summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/vmx.h
AgeCommit message (Collapse)AuthorFilesLines
2017-08-24KVM: MMU: Add 5 level EPT & Shadow page table support.Yu Zhang1-0/+2
Extends the shadow paging code, so that 5 level shadow page table can be constructed if VM is running in 5 level paging mode. Also extends the ept code, so that 5 level ept table can be constructed if maxphysaddr of VM exceeds 48 bits. Unlike the shadow logic, KVM should still use 4 level ept table for a VM whose physical address width is less than 48 bits, even when the VM is running in 5 level paging mode. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> [Unconditionally reset the MMU context in kvm_cpuid_update. Changing MAXPHYADDR invalidates the reserved bit bitmasks. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-18KVM: VMX: cleanup EPTP definitionsDavid Hildenbrand1-5/+6
Don't use shifts, tag them correctly as EPTP and use better matching names (PWL vs. GAW). Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-07KVM: nVMX: Emulate EPTP switching for the L1 hypervisorBandan Das1-0/+6
When L2 uses vmfunc, L0 utilizes the associated vmexit to emulate a switching of the ept pointer by reloading the guest MMU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-07KVM: vmx: Enable VMFUNCsBandan Das1-0/+3
Enable VMFUNC in the secondary execution controls. This simplifies the changes necessary to expose it to nested hypervisors. VMFUNCs still cause #UD when invoked. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-04-07KVM: nVMX: support RDRAND and RDSEED exitingPaolo Bonzini1-0/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-04-07kvm: nVMX: support EPT accessed/dirty bitsPaolo Bonzini1-0/+2
Now use bit 6 of EPTP to optionally enable A/D bits for EPTP. Another thing to change is that, when EPT accessed and dirty bits are not in use, VMX treats accesses to guest paging structures as data reads. When they are in use (bit 6 of EPTP is set), they are treated as writes and the corresponding EPT dirty bit is set. The MMU didn't know this detail, so this patch adds it. We also have to fix up the exit qualification. It may be wrong because KVM sets bit 6 but the guest might not. L1 emulates EPT A/D bits using write permissions, so in principle it may be possible for EPT A/D bits to be used by L1 even though not available in hardware. The problem is that guest page-table walks will be treated as reads rather than writes, so they would not cause an EPT violation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [Fixed typo in walk_addr_generic() comment and changed bit clear + conditional-set pattern in handle_ept_violation() to conditional-clear] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-01-27kvm: x86: mmu: Rename EPT_VIOLATION_READ/WRITE/INSTR constantsJunaid Shahid1-6/+6
Rename the EPT_VIOLATION_READ/WRITE/INSTR constants to EPT_VIOLATION_ACC_READ/WRITE/INSTR to more clearly indicate that these signify the type of the memory access as opposed to the permissions granted by the PTE. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-09kvm: x86: mmu: Lockless access tracking for Intel CPUs without EPT A bits.Junaid Shahid1-3/+6
This change implements lockless access tracking for Intel CPUs without EPT A bits. This is achieved by marking the PTEs as not-present (but not completely clearing them) when clear_flush_young() is called after marking the pages as accessed. When an EPT Violation is generated as a result of the VM accessing those pages, the PTEs are restored to their original values. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-09kvm: x86: mmu: Do not use bit 63 for tracking special SPTEsJunaid Shahid1-2/+7
MMIO SPTEs currently set both bits 62 and 63 to distinguish them as special PTEs. However, bit 63 is used as the SVE bit in Intel EPT PTEs. The SVE bit is ignored for misconfigured PTEs but not necessarily for not-Present PTEs. Since MMIO SPTEs use an EPT misconfiguration, so using bit 63 for them is acceptable. However, the upcoming fast access tracking feature adds another type of special tracking PTE, which uses not-Present PTEs and hence should not set bit 63. In order to use common bits to distinguish both type of special PTEs, we now use only bit 62 as the special bit. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-09kvm: x86: mmu: Use symbolic constants for EPT Violation Exit QualificationsJunaid Shahid1-0/+16
This change adds some symbolic constants for VM Exit Qualifications related to EPT Violations and updates handle_ept_violation() to use these constants instead of hard-coded numbers. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-08KVM: nVMX: support restore of VMX capability MSRsDavid Matlack1-0/+31
The VMX capability MSRs advertise the set of features the KVM virtual CPU can support. This set of features varies across different host CPUs and KVM versions. This patch aims to addresses both sources of differences, allowing VMs to be migrated across CPUs and KVM versions without guest-visible changes to these MSRs. Note that cross-KVM- version migration is only supported from this point forward. When the VMX capability MSRs are restored, they are audited to check that the set of features advertised are a subset of what KVM and the CPU support. Since the VMX capability MSRs are read-only, they do not need to be on the default MSR save/restore lists. The userspace hypervisor can set the values of these MSRs or read them from KVM at VCPU creation time, and restore the same value after every save/restore. Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-11-22KVM: VMX: clean up declaration of VPID/EPT invalidation typesJan Dakinevich1-1/+4
- Remove VMX_EPT_EXTENT_INDIVIDUAL_ADDR, since there is no such type of EPT invalidation - Add missing VPID types names Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com> Tested-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-11-02KVM: nVMX: support descriptor table exitsPaolo Bonzini1-0/+1
These are never used by the host, but they can still be reflected to the guest. Tested-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-23Revert "KVM: x86: add pcommit support"Dan Williams1-1/+0
This reverts commit 8b3e34e46aca9b6d349b331cd9cf71ccbdc91b2e. Given the deprecation of the pcommit instruction, the relevant VMX features and CPUID bits are not going to be rolled into the SDM. Remove their usage from KVM. Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-10KVM: VMX: Enable and initialize VMX TSC scalingHaozhong Zhang1-0/+3
This patch exhances kvm-intel module to enable VMX TSC scaling and collects information of TSC scaling ratio during initialization. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16KVM: nVMX: emulate the INVVPID instructionWanpeng Li1-0/+1
Add the INVVPID instruction emulation. Reviewed-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: add pcommit supportXiao Guangrong1-1/+1
Pass PCOMMIT CPU feature to guest to enable PCOMMIT instruction Currently we do not catch pcommit instruction for L1 guest and allow L1 to catch this instruction for L2 if, as required by the spec, L1 can enumerate the PCOMMIT instruction via CPUID: | IA32_VMX_PROCBASED_CTLS2[53] (which enumerates support for the | 1-setting of PCOMMIT exiting) is always the same as | CPUID.07H:EBX.PCOMMIT[bit 22]. Thus, software can set PCOMMIT exiting | to 1 if and only if the PCOMMIT instruction is enumerated via CPUID The spec can be found at https://software.intel.com/sites/default/files/managed/0d/53/319433-022.pdf Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-15x86/kvm: Rename VMX's segment access rights definesAndy Lutomirski1-23/+23
VMX encodes access rights differently from LAR, and the latter is most likely what x86 people think of when they think of "access rights". Rename them to avoid confusion. Cc: kvm@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-23kvm/x86: add support for MONITOR_TRAP_FLAGMihai Donțu1-0/+1
Allow a nested hypervisor to single step its guests. Signed-off-by: Mihai Donțu <mihai.dontu@gmail.com> [Fix overlong line. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-30KVM: VMX: Add PML support in VMXKai Huang1-0/+4
This patch adds PML support in VMX. A new module parameter 'enable_pml' is added to allow user to enable/disable it manually. Signed-off-by: Kai Huang <kai.huang@linux.intel.com> Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-05kvm: x86: handle XSAVES vmcs and vmexitWanpeng Li1-0/+2
Initialize the XSS exit bitmap. It is zero so there should be no XSAVES or XRSTORS exits. Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-05kvm: x86: Add kvm_x86_ops hook that enables XSAVES for guestWanpeng Li1-0/+1
Expose the XSAVES feature to the guest if the kvm_x86_ops say it is available. Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-19KVM: nVMX: Fix returned value of MSR_IA32_VMX_PROCBASED_CTLSJan Kiszka1-0/+3
SDM says bits 1, 4-6, 8, 13-16, and 26 have to be set. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-19KVM: x86: Fix constant value of VM_{EXIT_SAVE,ENTRY_LOAD}_DEBUG_CONTROLSJan Kiszka1-2/+2
The spec says those controls are at bit position 2 - makes 4 as value. The impact of this mistake is effectively zero as we only use them to ensure that these features are set at position 2 (or, previously, 1) in MSR_IA32_VMX_{EXIT,ENTRY}_CTLS - which is and will be always true according to the spec. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-24KVM: x86: Intel MPX vmx and msr handleLiu, Jinsong1-0/+4
From caddc009a6d2019034af8f2346b2fd37a81608d0 Mon Sep 17 00:00:00 2001 From: Liu Jinsong <jinsong.liu@intel.com> Date: Mon, 24 Feb 2014 18:11:11 +0800 Subject: [PATCH v5 1/3] KVM: x86: Intel MPX vmx and msr handle This patch handle vmx and msr of Intel MPX feature. Signed-off-by: Xudong Hao <xudong.hao@intel.com> Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-12KVM: nVMX: Add support for activity state HLTJan Kiszka1-0/+1
We can easily emulate the HLT activity state for L1: If it decides that L2 shall be halted on entry, just invoke the normal emulation of halt after switching to L2. We do not depend on specific host features to provide this, so we can expose the capability unconditionally. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-07nEPT: Nested INVEPTNadav Har'El1-0/+2
If we let L1 use EPT, we should probably also support the INVEPT instruction. In our current nested EPT implementation, when L1 changes its EPT table for L2 (i.e., EPT12), L0 modifies the shadow EPT table (EPT02), and in the course of this modification already calls INVEPT. But if last level of shadow page is unsync not all L1's changes to EPT12 are intercepted, which means roots need to be synced when L1 calls INVEPT. Global INVEPT should not be different since roots are synced by kvm_mmu_load() each time EPTP02 changes. Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Xinhao Xu <xinhao.xu@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-22KVM: nVMX: Shadow-vmcs control fields/bitsAbel Gordon1-0/+3
Add definitions for all the vmcs control fields/bits required to enable vmcs-shadowing Signed-off-by: Abel Gordon <abelg@il.ibm.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-16KVM: VMX: Check the posted interrupt capabilityYang Zhang1-0/+4
Detect the posted interrupt feature. If it exists, then set it in vmcs_config. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-03-14KVM: nVMX: Add preemption timer supportJan Kiszka1-0/+3
Provided the host has this feature, it's straightforward to offer it to the guest as well. We just need to load to timer value on L2 entry if the feature was enabled by L1 and watch out for the corresponding exit reason. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-14KVM: nVMX: Provide EFER.LMA saving supportJan Kiszka1-0/+2
We will need EFER.LMA saving to provide unrestricted guest mode. All what is missing for this is picking up EFER.LMA from VM_ENTRY_CONTROLS on L2->L1 switches. If the host does not support EFER.LMA saving, no change is performed, otherwise we properly emulate for L1 what the hardware does for L0. Advertise the support, depending on the host feature. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13KVM: nVMX: Clean up and fix pin-based execution controlsJan Kiszka1-0/+2
Only interrupt and NMI exiting are mandatory for KVM to work, thus can be exposed to the guest unconditionally, virtual NMI exiting is optional. So we must not advertise it unless the host supports it. Introduce the symbolic constant PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR at this chance. Reviewed-by:: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-07KVM: nVMX: Fix content of MSR_IA32_VMX_ENTRY/EXIT_CTLSJan Kiszka1-0/+4
Properly set those bits to 1 that the spec demands in case bit 55 of VMX_BASIC is 0 - like in our case. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-02-24Merge tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-3/+15
Pull KVM updates from Marcelo Tosatti: "KVM updates for the 3.9 merge window, including x86 real mode emulation fixes, stronger memory slot interface restrictions, mmu_lock spinlock hold time reduction, improved handling of large page faults on shadow, initial APICv HW acceleration support, s390 channel IO based virtio, amongst others" * tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits) Revert "KVM: MMU: lazily drop large spte" x86: pvclock kvm: align allocation size to page size KVM: nVMX: Remove redundant get_vmcs12 from nested_vmx_exit_handled_msr x86 emulator: fix parity calculation for AAD instruction KVM: PPC: BookE: Handle alignment interrupts booke: Added DBCR4 SPR number KVM: PPC: booke: Allow multiple exception types KVM: PPC: booke: use vcpu reference from thread_struct KVM: Remove user_alloc from struct kvm_memory_slot KVM: VMX: disable apicv by default KVM: s390: Fix handling of iscs. KVM: MMU: cleanup __direct_map KVM: MMU: remove pt_access in mmu_set_spte KVM: MMU: cleanup mapping-level KVM: MMU: lazily drop large spte KVM: VMX: cleanup vmx_set_cr0(). KVM: VMX: add missing exit names to VMX_EXIT_REASONS array KVM: VMX: disable SMEP feature when guest is in non-paging mode KVM: Remove duplicate text in api.txt Revert "KVM: MMU: split kvm_mmu_free_page" ...
2013-02-05KVM: VMX: add missing exit names to VMX_EXIT_REASONS arrayGleb Natapov1-1/+6
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-29x86, apicv: add virtual interrupt delivery supportYang Zhang1-0/+11
Virtual interrupt delivery avoids KVM to inject vAPIC interrupts manually, which is fully taken care of by the hardware. This needs some special awareness into existing interrupr injection path: - for pending interrupt, instead of direct injection, we may need update architecture specific indicators before resuming to guest. - A pending interrupt, which is masked by ISR, should be also considered in above update action, since hardware will decide when to inject it at right time. Current has_interrupt and get_interrupt only returns a valid vector from injection p.o.v. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-29x86, apicv: add virtual x2apic supportYang Zhang1-0/+1
basically to benefit from apicv, we need to enable virtualized x2apic mode. Currently, we only enable it when guest is really using x2apic. Also, clear MSR bitmap for corresponding x2apic MSRs when guest enabled x2apic: 0x800 - 0x8ff: no read intercept for apicv register virtualization, except APIC ID and TMCCT which need software's assistance to get right value. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-29x86, apicv: add APICv register virtualization supportYang Zhang1-0/+2
- APIC read doesn't cause VM-Exit - APIC write becomes trap-like Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2012-12-14UAPI: (Scripted) Disintegrate arch/x86/include/asmDavid Howells1-86/+3
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-12-13KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTSAlex Williamson1-3/+3
It's easy to confuse KVM_MEMORY_SLOTS and KVM_MEM_SLOTS_NUM. One is the user accessible slots and the other is user + private. Make this more obvious. Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-05kvm: don't use bit24 for detecting address-specific invalidation capabilityZhang Xiantao1-2/+1
Bit24 in VMX_EPT_VPID_CAP_MASI is not used for address-specific invalidation capability reporting, so remove it from KVM to avoid conflicts in future. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2012-09-21KVM: x86: Export svm/vmx exit code and vector code to userspaceXiao Guangrong1-43/+84
Exporting KVM exit information to userspace to be consumed by perf. Signed-off-by: Dong Hao <haodong@linux.vnet.ibm.com> [ Dong Hao <haodong@linux.vnet.ibm.com>: rebase it on acme's git tree ] Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: kvm@vger.kernel.org Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1347870675-31495-2-git-send-email-haodong@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-12KVM: VMX: Implement PCID/INVPCID for guests with EPTMao, Junjie1-0/+2
This patch handles PCID/INVPCID for guests. Process-context identifiers (PCIDs) are a facility by which a logical processor may cache information for multiple linear-address spaces so that the processor may retain cached information when software switches to a different linear address space. Refer to section 4.10.1 in IA32 Intel Software Developer's Manual Volume 3A for details. For guests with EPT, the PCID feature is enabled and INVPCID behaves as running natively. For guests without EPT, the PCID feature is disabled and INVPCID triggers #UD. Signed-off-by: Junjie Mao <junjie.mao@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-05KVM: VMX: Add EPT A/D bits definitionsXudong Hao1-0/+4
Signed-off-by: Haitao Shan <haitao.shan@intel.com> Signed-off-by: Xudong Hao <xudong.hao@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25KVM: APIC: avoid instruction emulation for EOI writesKevin Tian1-0/+12
Instruction emulation for EOI writes can be skipped, since sane guest simply uses MOV instead of string operations. This is a nice improvement when guest doesn't support x2apic or hyper-V EOI support. a single VM bandwidth is observed with ~8% bandwidth improvement (7.4Gbps->8Gbps), by saving ~5% cycles from EOI emulation. Signed-off-by: Kevin Tian <kevin.tian@intel.com> <Based on earlier work from>: Signed-off-by: Eddie Dong <eddie.dong@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12KVM: nVMX: vmcs12 checks on nested entryNadav Har'El1-0/+8
This patch adds a bunch of tests of the validity of the vmcs12 fields, according to what the VMX spec and our implementation allows. If fields we cannot (or don't want to) honor are discovered, an entry failure is emulated. According to the spec, there are two types of entry failures: If the problem was in vmcs12's host state or control fields, the VMLAUNCH instruction simply fails. But a problem is found in the guest state, the behavior is more similar to that of an exit. Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: nVMX: Exiting from L2 to L1Nadav Har'El1-0/+4
This patch implements nested_vmx_vmexit(), called when the nested L2 guest exits and we want to run its L1 parent and let it handle this exit. Note that this will not necessarily be called on every L2 exit. L0 may decide to handle a particular exit on its own, without L1's involvement; In that case, L0 will handle the exit, and resume running L2, without running L1 and without calling nested_vmx_vmexit(). The logic for deciding whether to handle a particular exit in L1 or in L0, i.e., whether to call nested_vmx_vmexit(), will appear in a separate patch below. Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: nVMX: Success/failure of VMX instructions.Nadav Har'El1-0/+31
VMX instructions specify success or failure by setting certain RFLAGS bits. This patch contains common functions to do this, and they will be used in the following patches which emulate the various VMX instructions. Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: VMX: Add definitions for more vm entry/exit control bitsAvi Kivity1-0/+8
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: VMX: add module parameter to avoid trapping HLT instructions (v5)Anthony Liguori1-0/+6
In certain use-cases, we want to allocate guests fixed time slices where idle guest cycles leave the machine idling. There are many approaches to achieve this but the most direct is to simply avoid trapping the HLT instruction which lets the guest directly execute the instruction putting the processor to sleep. Introduce this as a module-level option for kvm-vmx.ko since if you do this for one guest, you probably want to do it for all. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>