summaryrefslogtreecommitdiff
path: root/arch/s390/kernel/setup.c
AgeCommit message (Collapse)AuthorFilesLines
2016-07-13s390/console: Make preferred console handling more consistentPeter Oberparleiter1-8/+14
Use the same code structure when determining preferred consoles for Linux running as KVM guest as with Linux running in LPAR and z/VM guest: - Extend the console_mode variable to cover vt220 and hvc consoles - Determine sensible console defaults in conmode_default() - Remove KVM-special handling in set_preferred_console() Ensure that the sclp line mode console is also registered when the vt220 console was selected to not change existing behavior that someone might be relying on. As an externally visible change, KVM guest users can now select the 3270 or 3215 console devices using the conmode= kernel parameter, provided that support for the corresponding driver was compiled into the kernel. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390: use __section macro everywhereHeiko Carstens1-1/+1
Small cleanup patch to use the shorter __section macro everywhere. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/kexec: fix crash on resize of reserved memoryHeiko Carstens1-1/+14
Reducing the size of reserved memory for the crash kernel will result in an immediate crash on s390. Reason for that is that we do not create struct pages for memory that is reserved. If that memory is freed any access to struct pages which correspond to this memory will result in invalid memory accesses and a kernel panic. Fix this by properly creating struct pages when the system gets initialized. Change the code also to make use of set_memory_ro() and set_memory_rw() so page tables will be split if required. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/cpuinfo: show dynamic and static cpu mhzHeiko Carstens1-0/+1
Show the dynamic and static cpu mhz of each cpu. Since these values are per cpu this requires a fundamental extension of the format of /proc/cpuinfo. Historically we had only a single line per cpu and a summary at the top of the file. This format is hardly extendible if we want to add more per cpu information. Therefore this patch adds per cpu blocks at the end of /proc/cpuinfo: cpu : 0 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 cpu : 1 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 cpu : 2 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 cpu : 3 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 Right now each block contains only the dynamic and static cpu mhz, but it can be easily extended like on every other architecture. This extension is supposed to be compatible with the old format. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-21s390/fpu: allocate 'struct fpu' with the task_structMartin Schwidefsky1-0/+17
Analog to git commit 0c8c0f03e3a292e031596484275c14cf39c0ab7a "x86/fpu, sched: Dynamically allocate 'struct fpu'" move the struct fpu to the end of the struct thread_struct, set CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and add the setup_task_size() function to calculate the correct size fo the task struct. For the performance_defconfig this increases the size of struct task_struct from 7424 bytes to 7936 bytes (MACHINE_HAS_VX==1) or 7552 bytes (MACHINE_HAS_VX==0). The dynamic allocation of the struct fpu is removed. The slab cache uses an 8KB block for the task struct in all cases, there is enough room for the struct fpu. For MACHINE_HAS_VX==1 each task now needs 512 bytes less memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-16Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - Add the CPU id for the new z13s machine - Add a s390 specific XOR template for RAID-5 checksumming based on the XC instruction. Remove all other alternatives, XC is always faster - The merge of our four different stack tracers into a single one - Tidy up the code related to page tables, several large inline functions are now out-of-line. Bloat-o-meter reports ~11K text size reduction - A binary interface for the priviledged CLP instruction to retrieve the hardware view of the installed PCI functions - Improvements for the dasd format code - Bug fixes and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits) s390/pci: enforce fmb page boundary rule s390: fix floating pointer register corruption (again) s390/cpumf: add missing lpp magic initialization s390: Fix misspellings in comments s390/mm: split arch/s390/mm/pgtable.c s390/mm: uninline pmdp_xxx functions from pgtable.h s390/mm: uninline ptep_xxx functions from pgtable.h s390/pci: add ioctl interface for CLP s390: Use pr_warn instead of pr_warning s390/dasd: remove casts to dasd_*_private s390/dasd: Refactor dasd format functions s390/dasd: Simplify code in format logic s390/dasd: Improve dasd format code s390/percpu: remove this_cpu_cmpxchg_double_4 s390/cpumf: Improve guest detection heuristics s390/fault: merge report_user_fault implementations s390/dis: use correct escape sequence for '%' character s390/kvm: simplify set_guest_storage_key s390/oprofile: add z13/z13s model numbers s390: add z13s model number to z13 elf platform ...
2016-03-10s390/cpumf: add missing lpp magic initializationHeiko Carstens1-0/+1
Add the missing lpp magic initialization for cpu 0. Without this all samples on cpu 0 do not have the most significant bit set in the program parameter field, which we use to distinguish between guest and host samples if the pid is also 0. We did initialize the lpp magic in the absolute zero lowcore but forgot that when switching to the allocated lowcore on cpu 0 only. Reported-by: Shu Juan Zhang <zhshuj@cn.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: e22cf8ca6f75 ("s390/cpumf: rework program parameter setting to detect guest samples") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-24s390: add z13s model number to z13 elf platformHeiko Carstens1-0/+1
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-30arch: Set IORESOURCE_SYSTEM_RAM flag for System RAMToshi Kani1-4/+4
Set IORESOURCE_SYSTEM_RAM in flags of resource ranges with "System RAM", "Kernel code", "Kernel data", and "Kernel bss". Note that: - IORESOURCE_SYSRAM (i.e. modifier bit) is set in flags when IORESOURCE_MEM is already set. IORESOURCE_SYSTEM_RAM is defined as (IORESOURCE_MEM|IORESOURCE_SYSRAM). - Some archs do not set 'flags' for children nodes, such as "Kernel code". This patch does not change 'flags' in this case. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-mm <linux-mm@kvack.org> Cc: linux-parisc@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/1453841853-11383-7-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-19s390: remove all usages of PSW_ADDR_AMODEHeiko Carstens1-10/+6
This is a leftover from the 31 bit area. For CONFIG_64BIT the usual operation "y = x | PSW_ADDR_AMODE" is a nop. Therefore remove all usages of PSW_ADDR_AMODE and make the code a bit less confusing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
2016-01-13Merge branch 'for-linus' of ↵Linus Torvalds1-13/+10
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Among the traditional bug fixes and cleanups are some improvements: - A tool to generated the facility lists, generating the bit fields by hand has been a source of bugs in the past - The spinlock loop is reordered to avoid bursts of hypervisor calls - Add support for the open-for-business interface to the service element - The get_cpu call is added to the vdso - A set of tracepoints is defined for the common I/O layer - The deprecated sclp_cpi module is removed - Update default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (56 commits) s390/sclp: fix possible control register corruption s390: fix normalization bug in exception table sorting s390/configs: update default configurations s390/vdso: optimize getcpu system call s390: drop smp_mb in vdso_init s390: rename struct _lowcore to struct lowcore s390/mem_detect: use unsigned longs s390/ptrace: get rid of long longs in psw_bits s390/sysinfo: add missing SYSIB 1.2.2 multithreading fields s390: get rid of CONFIG_SCHED_MC and CONFIG_SCHED_BOOK s390/Kconfig: remove pointless 64 bit dependencies s390/dasd: fix failfast for disconnected devices s390/con3270: testing return kzalloc retval s390/hmcdrv: constify hmcdrv_ftp_ops structs s390/cio: add NULL test s390/cio: Change I/O instructions from inline to normal functions s390/cio: Introduce common I/O layer tracepoints s390/cio: Consolidate inline assemblies and related data definitions s390/cio: Fix incorrect xsch opcode specification s390/cio: Remove unused inline assemblies ...
2016-01-11s390: rename struct _lowcore to struct lowcoreHeiko Carstens1-3/+3
Finally get rid of the leading underscore. I tried this already two or three years ago, however Michael Holzheu objected since this would break the crash utility (again). However Michael integrated support for the new name into the crash utility back then, so it doesn't break if the name will be changed now. So finally get rid of the ever confusing leading underscore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-30s390: show virtualization support in /proc/cpuinfoDavid Hildenbrand1-0/+9
This patch exposes the SIE capability (aka virtualization support) via /proc/cpuinfo -> "features" as "sie". As we don't want to expose this hwcap via elf, let's add a second, "internal"/non-elf capability list. The content is simply concatenated to the existing features when printing /proc/cpuinfo. We also add the defines to elf.h to keep the hwcap stuff at a common place. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-27s390/dump: rework CPU register dump codeMartin Schwidefsky1-0/+2
To collect the CPU registers of the crashed system allocated a single page with memblock_alloc_base and use it as a copy buffer. Replace the stop-and-store-status sigp with a store-status-at-address sigp in smp_save_dump_cpus() and smp_store_status(). In both cases the target CPU is already stopped and store-status-at-address avoids the detour via the absolute zero page. For kexec simplify s390_reset_system and call store_status() before the prefix register of the boot CPU has been set to zero. Use STPX to store the prefix register and remove dump_prefix_page. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/kdump: remove code to create ELF notes in the crashed systemMartin Schwidefsky1-10/+5
The s390 architecture can store the CPU registers of the crashed system after the kdump kernel has been started and this is the preferred way. Remove the remaining code fragments that deal with storing CPU registers while the crashed system is still active. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-16s390: remove g5 elf platform supportHeiko Carstens1-3/+0
Remove dead code, since this could only happen on a 31 bit machine where the kernel wouldn't IPL. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-19s390/setup: fix novx parameterMartin Schwidefsky1-8/+7
The novx parameter disables the vector facility but the HWCAP_S390_VXRS bit in the ELf hardware capabilies is always set if the machine has the vector facility. If the user space program uses the "vx" string in the features field of /proc/cpuinfo to utilize vector instruction it will crash if the novx kernel paramter is set. Convert setup_hwcaps to an arch_initcall and use MACHINE_HAS_VX to decide if the HWCAPS_S390_VXRS bit needs to be set. Cc: stable@vger.kernel.org # 3.18+ Reported-by: Ulrich Weigand <uweigand@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-03s390/numa: add core infrastructurePhilipp Hachtmann1-0/+2
Enable core NUMA support for s390 and add one simple default mode "plain" that creates one single NUMA node. This patch contains several changes from Michael Holzheu. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-22s390/module: enable generic CPU feature modalias using s390 ELF hwcapsHendrik Brueckner1-1/+1
Add support for the generic CPU feature modalias implementation that wires up optional CPU features to udev-based module autoprobing. The <asm/cpufeature.h> file provides definitions to map CPU features to s390 ELF hardware capabilities. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-17revert "s390/mm: make hugepages_supported a boot time decision"Dominik Dingel1-2/+0
Heiko noticed that the current check for hugepage support on s390 is a little bit too harsh as systems which do not support will crash. The reason is that pageblock_order can now get negative when we set HPAGE_SHIFT to 0. To avoid all this and to avoid opening another can of worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best to simply allow architectures to define their own hugepages_supported(). Revert bea41197ead3 ("s390/mm: make hugepages_supported a boot time decision") in preparation. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30Merge branch 'for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: "There is one larger patch for the AP bus code to make it work with the longer reset periods of the latest crypto cards. A new default configuration, a naming cleanup for SMP and a few fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/kdump: fix compile for !SMP s390/kdump: fix nosmt kernel parameter s390: new default configuration s390/smp: cleanup core vs. cpu in the SCLP interface s390/smp: fix sigp cpu detection loop s390/zcrypt: Fixed reset and interrupt handling of AP queues s390/kdump: fix REGSET_VX_LOW vector register ELF notes s390/bpf: Fix backward jumps
2015-06-25s390/mm: make hugepages_supported a boot time decisionDominik Dingel1-0/+2
There is a potential bug with KVM and hugetlbfs if the hardware does not support hugepages (EDAT1). We fix this by making EDAT1 a hard requirement for hugepages and therefore removing and simplifying code. As s390, with the sw-emulated hugepages, was the only user of arch_prepare/release_hugepage I also removed theses calls from common and other architecture code. This patch (of 5): By dropping support for hugepages on machines which do not have the hardware feature EDAT1, we fix a potential s390 KVM bug. The bug would happen if a guest is backed by hugetlbfs (not supported currently), but does not get pagetables with PGSTE. This would lead to random memory overwrites. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25s390/kdump: fix nosmt kernel parameterMichael Holzheu1-0/+5
It turned out that SIGP set-multi-threading can only be done once. Therefore switching to a different MT level after switching to sclp.mtid_prev in the dump case fails. As a symptom specifying the "nosmt" parameter currently fails for the kdump kernel and the kernel starts with multi-threading enabled. So fix this and issue diag 308 subcode 1 call after collecting the CPU states for the dump. Also enhance the diag308_reset() function to be usable also with enabled lowcore protection and prefix register != 0. After the reset it is possible to switch the MT level again. We have to do the reset very early in order not to kill the already initialized console. Therefore instead of kmalloc() the corresponding memblock functions have to be used. To avoid copying the sclp cpu code into sclp_early, we now use the simple sigp loop method for CPU detection. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-18s390/setup: fix DMA_API_DEBUG warningsSebastian Ott1-4/+9
Addresses from the usable space in [_ehead, _stext] lead to false positives in DMA_API_DEBUG code (which will complain when an address is in [_text, _etext]). Avoid these warnings by not using that memory in case of CONFIG_DMA_API_DEBUG=y. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13s390/sclp: unify basic sclp access by exposing "struct sclp"David Hildenbrand1-5/+5
Let's unify basic access to sclp fields by storing the data in an external struct in asm/sclp.h. The values can now directly be accessed by other components, so there is no need for most accessor functions and external variables anymore. The mtid, mtid_max and facility part will be cleaned up separately. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-25s390: remove 31 bit supportHeiko Carstens1-72/+0
Remove the 31 bit support in order to reduce maintenance cost and effectively remove dead code. Since a couple of years there is no distribution left that comes with a 31 bit kernel. The 31 bit kernel also has been broken since more than a year before anybody noticed. In addition I added a removal warning to the kernel shown at ipl for 5 minutes: a960062e5826 ("s390: add 31 bit warning message") which let everybody know about the plan to remove 31 bit code. We didn't get any response. Given that the last 31 bit only machine was introduced in 1999 let's remove the code. Anybody with 31 bit user space code can still use the compat mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-12s390/topology: delay initialization of topology cpu masksHeiko Carstens1-1/+0
There is no reason to initialize the topology cpu masks already while setup_arch() is being called. It is sufficient to initialize the masks before the scheduler becomes SMP aware. Therefore a pre-SMP initcall aka early_initcall is suffucient. This also allows to convert the cpu_topology array into a per cpu variable with a later patch. Without this patch this wouldn't be possible since the per cpu memory areas are not allocated while setup_arch is executed. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22s390: add z13 code generation supportMartin Schwidefsky1-0/+3
Allow to generate code that only runs on z13 machines. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/ftrace,kprobes: allow to patch first instructionHeiko Carstens1-2/+0
If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09s390: add support for vector extensionMartin Schwidefsky1-0/+9
The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-26s390/setup: correct 4-level kernel page table detectionMartin Schwidefsky1-2/+2
Fix calculation to decide if a 4-level kernel page table is required. Git commit c972cc60c23f5a63 "s390/vmalloc: have separate modules area" added the separate module area which reduces the size of the vmalloc area but fails to take it into account for the 3 vs 4 level page table decision. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-12s390: add system information as device randomnessMartin Schwidefsky1-0/+19
The virtual-machine cpu information data block and the cpu-id of the boot cpu can be used as source of device randomness. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINEMichael Holzheu1-0/+2
We only have to check kdump memory for the MEM_GOING_OFFLINE action. Therefore skip the test and return NOTIFY_OK for all other memory hotplug actions. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390/dump: Remove CONFIG_ZFCPDUMPMichael Holzheu1-3/+3
Currently there are two s390 kernel dump config options "CONFIG_ZFCPDUMP" and "CONFIG_CRASH_DUMP". In order to keep things simple and because the "CONFIG_ZFCPDUMP" option already has a dependency to "CONFIG_CRASH_DUMP" remove the CONFIG_ZFCPDUMP option. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390/spinlock: optimize spinlock code sequencePhilipp Hachtmann1-0/+4
Use lowcore constant to improve the code generated for spinlocks. [ Martin Schwidefsky: patch breakdown and code beautification ] Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390/mm: Convert bootmem to memblockPhilipp Hachtmann1-291/+160
The original bootmem allocator is getting replaced by memblock. To cover the needs of the s390 kdump implementation the physical memory list is used. With this patch the bootmem allocator and its bitmaps are completely removed from s390. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-11s390: add 31 bit warning messageHeiko Carstens1-0/+32
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-02-21s390/uaccess: remove dead kernel parameter 'user_mode='Heiko Carstens1-8/+0
Remove another leftover from the time when we supported running user space in either home or primary address space. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-02-21s390/uaccess: get rid of indirect function callsHeiko Carstens1-9/+0
There are only two uaccess variants on s390 left: the version that is used if the mvcos instruction is available, and the page table walk variant. So there is no need for expensive indirect function calls. By default the mvcos variant will be called. If the mvcos instruction is not available it will call the page table walk variant. For minimal performance impact the "if (mvcos_is_available)" is implemented with a jump label, which will be a six byte nop on machines with mvcos. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-01-20Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The bulk of the s390 updates for v3.14. New features are the perf support for the CPU-Measurement Sample Facility and the EP11 support for the crypto cards. And the normal cleanups and bug-fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits) s390/cpum_sf: fix printk format warnings s390: Fix misspellings using 'codespell' tool s390/qdio: bridgeport support - CHSC part s390: delete new instances of __cpuinit usage s390/compat: fix PSW32_USER_BITS definition s390/zcrypt: add support for EP11 coprocessor cards s390/mm: optimize randomize_et_dyn for !PF_RANDOMIZE s390: use IS_ENABLED to check if a CONFIG is set to y or m s390/cio: use device_lock to synchronize calls to the ccwgroup driver s390/cio: use device_lock to synchronize calls to the ccw driver s390/cio: fix unlocked access of online member s390/cpum_sf: Add flag to process full SDBs only s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function s390/cpum_sf: Filter perf events based event->attr.exclude_* settings s390/cpum_sf: Detect KVM guest samples s390/cpum_sf: Add helper to read TOD from trailer entries s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur s390/pci: reenable per default s390/pci/dma: fix accounting of allocated_pages ...
2014-01-16s390: Fix misspellings using 'codespell' toolHendrik Brueckner1-1/+1
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-18s390/smp: improve setup of possible cpu maskHeiko Carstens1-0/+1
Since under z/VM we cannot have more than 64 cpus, make sure the cpu_possible_mask does not contain more bits. This avoids wasting memory for dynamic per-cpu allocations if CONFIG_NR_CPUS is larger than 64. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/sclp: Determine HSA size dynamically for zfcpdumpMichael Holzheu1-3/+4
Currently we have hardcoded the HSA size to 32 MiB. With this patch the HSA size is determined dynamically via SCLP in early.c. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/uaccess: always run the kernel in home spaceMartin Schwidefsky1-49/+10
Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-26s390: add support for IBM zBC12 machineHeiko Carstens1-0/+1
Just add the new model number where appropiate. Cc: stable@vger.kernel.org # v3.10 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-03s390: remove setting for saved_max_pfnZhang Yanfei1-4/+0
The only user of saved_max_pfn in s390 is read_oldmem interface but we have removed that interface, so saved_max_pfn is now unneeded in s390, and we needn't set it anymore. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-03s390/mem_detect: remove artificial kdump memory typesHeiko Carstens1-21/+7
Simplify the memory detection code a bit by removing the CHUNK_OLDMEM and CHUNK_CRASHK memory types. They are not needed. Everything that is needed is a mechanism to insert holes into the detected memory. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02s390/mem_detect: limit memory detection loop to "mem=" parameterHeiko Carstens1-1/+1
The current memory detection loop will detect all present memory of a machine. This is true even if the user specified the "mem=" parameter on the kernel command line. This can be a problem since the memory detection may cause a fully populated host page table for the guest, even for those parts of the memory that the guest will never use afterwards. So fix this and only detect memory up to a user supplied "mem=" limit if specified. Reported-by: Michael Johanssen <johanssn@de.ibm.com> Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02s390/kdump,bootmem: fix bootmem allocator bitmap sizeHeiko Carstens1-1/+5
When in kdump mode the kernel may access only the first couple of megabytes for execution, the rest contains the dump. However the size of the bitmap used by the bootmem allocator was calculated for the whole amount of memory of the machine. For very large machines this can lead to the situation that the kdump kernel will not come up because not enough memory is available. So fix this and calculate the size of the bitmap only for the piece of memory that the kdump kernel actually uses. Call reserve_oldmem() before setup_memory_end() so that the memory_chunk array already has been updated with respect to oldmem chunks. Afterwards setup_memory_end() will ignore those chunks. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02s390: get rid of odd global real_memory_sizeHeiko Carstens1-8/+11
The variable real_memory_size has odd semantics and has been used in a broken way by e.g. the old kvm code. Therefore get rid of it before anybody else makes use of it. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 08:49:59 +0000