summaryrefslogtreecommitdiff
path: root/arch/m68k/mac
AgeCommit message (Collapse)AuthorFilesLines
2016-08-05Merge tag 'rtc-4.8' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ...
2016-07-03m68k: Assorted spelling fixesAndrea Gelmini1-1/+1
- s/acccess/access/ - s/accoding/according/ - s/addad/added/ - s/addreess/address/ - s/allocatiom/allocation/ - s/Assember/Assembler/ - s/compactnes/compactness/ - s/conneced/connected/ - s/decending/descending/ - s/diectly/directly/ - s/diplacement/displacement/ Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> [geert: Squashed, fix arch/m68k/ifpsp060/src/pfpsp.S] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-06-04char/genrtc: remove m68k supportArnd Bergmann2-2/+2
The asm/rtc.h header is only used for the old gen_rtc driver that has been replaced by rtc-generic. According to Geert Uytterhoeven, nobody has used the old driver on m68k for a long time, so we can now just remove the header file and disallow the driver in Kconfig. All files that used to include asm/rtc.h are now changed so they include the headers that were used implicitly through asm/rtc.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-29m68k: Fix misspellings in comments.Adam Buchbinder1-1/+1
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> [nommu, coldfire] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2015-11-23m68k/mac: Kill psc_presentGeert Uytterhoeven2-7/+6
The presence of the Apple Peripheral System Controller (PSC) can be tested for by just checking its base address pointer. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2015-09-29m68k/mac: Export Peripheral System Controller (PSC) base address to modulesGeert Uytterhoeven1-0/+1
If CONFIG_MACMACE=m: ERROR: psc [drivers/net/ethernet/apple/macmace.ko] undefined! Add the missing export to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner4-7/+7
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-08-01m68k/irq: Prepare irq handlers for irq argument removalThomas Gleixner2-3/+6
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org
2015-06-25m68k/psc: Fix race in installing chained IRQ handlerThomas Gleixner1-8/+4
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Joshua Thompson <funaho@jurai.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org
2015-03-30m68k/mac: Fix out-of-bounds array index in OSS IRQ source initializationFinn Thain1-2/+1
Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2015-01-11m68k/mac: Fix scsi_type for Mac LC and similar modelsFinn Thain1-15/+17
Designing Cards and Drivers for the Macintosh Family, 3rd ed. on page 310 says that the I/O address space for the Mac LC is $50F0 0000 - $50FF FFFF. The developer notes for the Classic II, LC III and IIvx/IIvi give the same I/O address space. That means I've assigned the wrong platform resources to those Mac models. Fix the scsi_type initialization for the affected models, to restore the SCSI base address to its value prior to Linux 3.18. Also rename MAC_SCSI_CCL as MAC_SCSI_LC for the sake of correct chronology. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-11-20mac_scsi: Convert to platform deviceFinn Thain1-14/+132
Convert mac_scsi to platform device and eliminate scsi_register(). Platform resources for chip registers now follow the documentation. This should fix issues with the Mac IIci (and possibly other models too). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-28m68k: Multi-platform EARLY_PRINTKFinn Thain1-29/+0
Make the boot console available to more m68k platforms by leveraging the head.S debug console. The boot console is enabled by the "earlyprintk" command line argument which is how most other architectures do this. This is a change of behaviour for the Mac but does not negatively impact the common use-case which is not debugging. This is also a change of behaviour for other platforms because it means the serial port stays quiet when CONFIG_EARLY_PRINTK is not enabled. This is also an improvement for the common use-case. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stephen N Chivers <schivers@csc.com.au> [Geert: CONSOLE_DEBUG should depend on CONFIG_FONT_SUPPORT] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k: Remove superfluous inclusions of <asm/bootinfo.h>Geert Uytterhoeven5-5/+0
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k/UAPI: Use proper types (endianness/size) in <asm/bootinfo*.h>Geert Uytterhoeven1-15/+17
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k/UAPI: Disintegrate arch/m68k/include/asm/bootinfo.hGeert Uytterhoeven1-0/+1
Export the bootinfo definitions that are used by bootstrap loaders, and split them up in generic and platform-specific parts. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k: Drop remainings and API of BOOTINFO_COMPAT_1_0Geert Uytterhoeven2-2/+0
Drop remainings and API for backwards compatibility with bootinfo interface version 1.0. This was used when booting a 2.1.x or newer kernel on Amiga, Atari, or Mac using a bootstrap for kernel 2.0.x. Everybody upgraded his bootstrap a long time ago, so this can go. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k/mac: Fix comment about iop_*_present flags setup timingGeert Uytterhoeven1-2/+2
This is no longer done from iop_init() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k: Mark functions only called from setup_arch() __initGeert Uytterhoeven1-1/+1
Some functions that are only called (indirectly) from setup_arch() lack __init annotations. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-12-24m68k: set arch_gettimeoffset directlyStephen Warren2-4/+4
remove m68k's mach_gettimeoffset function pointer, and instead directly set the arch_gettimeoffset function pointer. This requires multiplying all function results by 1000, since the removed m68k_gettimeoffset() did this. Also, s/unsigned long/u32/ just to make the function prototypes exactly match that of arch_gettimeoffset. Cc: Joshua Thompson <funaho@jurai.org> Cc: Sam Creasey <sammy@sammy.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Phil Blundell <philb@gnu.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-01m68k/mac: Add missing platform check before registering platform devicesGeert Uytterhoeven1-0/+3
On multi-platform kernels, the Mac platform devices should be registered when running on Mac only. Else it may crash later. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org
2012-03-28Disintegrate asm/system.h for M68KDavid Howells2-2/+0
Disintegrate asm/system.h for M68K. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org> cc: linux-m68k@lists.linux-m68k.org
2011-12-10m68k/mac: cleanup macro caseFinn Thain2-34/+30
Code style convention has macro names in uppercase. Change MAC_VIA_IIci to MAC_VIA_IICI. Also remove an obsolete comment. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10mac_scsi: fix mac_scsi on some powerbooksFinn Thain1-14/+20
Fix the mac_scsi interrupt edge trigger on non-RBV PowerBooks. This doesn't appear to help my PowerBook 520 but the NetBSD source reveals that the PowerBook 500 series is different than the others. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: fix powerbook 150 adb_typeFinn Thain1-1/+1
The PowerBook 150 is a actually a Duo underneath. Fix the adb_type. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: fix baboon irq disable and shutdownFinn Thain1-14/+8
The baboon_disabled hack is broken because it is missing an irq shutdown method. So releasing a Baboon irq kills the other Baboon irqs. But we don't really need this hack because we don't have media bay support and TREX uses a NuBus IRQ. Remove it. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: oss irq fixesFinn Thain4-87/+73
The IOP driver calls into the OSS driver to enable its IRQ. This undesirable coupling between drivers only exists because the OSS driver doesn't correctly handle all of its machspec IRQs. Fix OSS handling of enable/disable for VIA1 IRQs (8 thru 15) which includes MAC_IRQ_ADB. Back when I implemented pmac_zilog support I redefined IRQ_MAC_SCC incorrectly. Change this to a machspec IRQ so that it works on OSS. Clean up the unused OSS audio IRQ and OSS_IRQLEV_* cruft that only confuses things. Fix the OSS description in macints.c and remove an obsolete comment. Don't enable the VIA1 irq before registering the handler. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: fix nubus slot irq disable and shutdownFinn Thain2-42/+108
Improve NuBus slot interrupt handling code and documentation. This patch fixes the NuBus NIC (mac8390) in my Quadra 700. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: enable via_alt_mapping on performa 580Finn Thain3-33/+24
Enable via_alt_mapping on the Performa 588 and tidy up related documentation. I'm betting that remapped IRQs work just fine on the Performa 580 series since it works on the LC 630 and the logic board part numbers are reputedly the same. And the consensus seems to be that the Mac TV is essentially a Performa 550, not dissimilar to the Performa 520, so set the via_type accordingly. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup forward declarationsFinn Thain4-64/+6
Move some forward declarations into header files and adjust includes. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup mac_irq_pendingFinn Thain5-99/+6
mac_irq_pending() has only one caller (mac_esp.c). Nothing tests for Baboon, PSC or OSS pending interrupts. Until that need arises, let's keep it simple and remove all the unused abstraction. Replace it with a routine to check for SCSI DRQ. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup mac_clear_irqFinn Thain5-95/+0
mac_clear_irq() is dead code and has been dead for as long as I can recall. On certain Mac models, certain irqs can't be cleared this way. Outside of irq dispatch, this code appears be unusable without busy loops or worse, and for irq dispatch we duplicate the same logic. Remove mac_clear_irq() and supporting code. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: early consoleFinn Thain1-0/+29
Revive the old mac_serial_print() routine as mac_early_print(). mac_serial_print() did not function because it did not use the right offsets for its stack arguments. Fix this and make compilation conditional on CONFIG_EARLY_PRINTK instead of the obscure MAC_SERIAL_DEBUG macro. Give mac_early_print() a new string length parameter to fit the early console API. Send output to the framebuffer as well as serial ports. Change the line rate to 38400 baud to match the default for the real (pmac_zilog) serial console. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/mac: Remove mac_irq_{en,dis}able() wrappersFinn Thain2-23/+9
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete m68k irq frameworkGeert Uytterhoeven4-267/+0
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/mac: Optimize interrupts using chain handlersGeert Uytterhoeven4-63/+298
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/mac: Convert Mac to genirqGeert Uytterhoeven4-0/+12
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete IRQ_FLG_* usersGeert Uytterhoeven3-28/+17
The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Rename {,__}m68k_handle_int()Geert Uytterhoeven4-7/+7
- Rename m68k_handle_int() to generic_handle_irq(), and drop the unneeded asmlinkage, - Rename __m68k_handle_int() to do_IRQ(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Add m68k_setup_irq_controller()Geert Uytterhoeven1-1/+1
This is a wrapper around m68k_setup_irq_chip() that discards its dummy second parameter, to ease the future transition to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Switch irq_chip methods to "struct irq_data *data"Geert Uytterhoeven1-2/+12
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Rename irq_controller to irq_chipGeert Uytterhoeven1-5/+4
Make it more similar to the genirq version: - Remove lock (unused as we don't do SMP anyway), - Prepend methods with irq_, - Make irq_startup() return unsigned int. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-10-24m68k/mac: Fix mac_irq_pending() for PSC MACE and SCCFinn Thain1-1/+1
Add missing return statement. The docs say that the level 4 PSC IRQs relate to MACE DMA and SCC. Since those drivers don't call mac_irq_pending() this patch has no affect. But it should be fixed all the same, since it can be useful for MACE debugging. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-24m68k/mac: Fix compiler warning in via_read_time()Finn Thain1-17/+23
The algorithm described in the comment compares two reads from the RTC but the code actually reads once and compares the result to an uninitialized value. This causes the compiler to warn, "last_result maybe used uninitialized". Make the code match the comment, fix the warning and perhaps improve reliability. Tested on a Quadra 700. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-12-10fix comment typos concerning "consistent"Uwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-18Update broken web addresses in arch directory.Justin P. Mattock1-1/+2
The patch below updates broken web addresses in the arch directory. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01arch/m68k/mac/macboing.c: use unsigned long for irqflagsAndrew Morton1-3/+3
Fix the warnings arch/m68k/mac/macboing.c: In function 'mac_mksound': arch/m68k/mac/macboing.c:189: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c:211: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c: In function 'mac_quadra_start_bell': arch/m68k/mac/macboing.c:241: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c:263: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c: In function 'mac_quadra_ring_bell': arch/m68k/mac/macboing.c:283: warning: comparison of distinct pointer types lacks a cast Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09m68k/mac: Fix RTC on PMU machinesFinn Thain1-3/+3
Copy RTC response bytes correctly on powerbooks and duos. Thanks to Diego Cousinet who debugged this and provided me with the fix. Tested on PowerBook 190 and Duo 280c. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reported-by: Diego Cousinet <diego@pvco.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-08-09m68k/mac: Add color classic ii supportFinn Thain1-0/+9
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 05:13:01 +0000