summaryrefslogtreecommitdiff
path: root/arch/loongarch
AgeCommit message (Collapse)AuthorFilesLines
2024-02-09work around gcc bugs with 'asm goto' with outputsLinus Torvalds1-2/+2
We've had issues with gcc and 'asm goto' before, and we created a 'asm_volatile_goto()' macro for that in the past: see commits 3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation bug") and a9f180345f53 ("compiler/gcc4: Make quirk for asm_volatile_goto() unconditional"). Then, much later, we ended up removing the workaround in commit 43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR 58670") because we no longer supported building the kernel with the affected gcc versions, but we left the macro uses around. Now, Sean Christopherson reports a new version of a very similar problem, which is fixed by re-applying that ancient workaround. But the problem in question is limited to only the 'asm goto with outputs' cases, so instead of re-introducing the old workaround as-is, let's rename and limit the workaround to just that much less common case. It looks like there are at least two separate issues that all hit in this area: (a) some versions of gcc don't mark the asm goto as 'volatile' when it has outputs: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420 which is easy to work around by just adding the 'volatile' by hand. (b) Internal compiler errors: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422 which are worked around by adding the extra empty 'asm' as a barrier, as in the original workaround. but the problem Sean sees may be a third thing since it involves bad code generation (not an ICE) even with the manually added 'volatile'. but the same old workaround works for this case, even if this feels a bit like voodoo programming and may only be hiding the issue. Reported-and-tested-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/ Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Uros Bizjak <ubizjak@gmail.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Andrew Pinski <quic_apinski@quicinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-02-06LoongArch: vDSO: Disable UBSAN instrumentationKees Cook1-0/+1
The vDSO executes in userspace, so the kernel's UBSAN should not instrument it. Solves these kind of build errors: loongarch64-linux-ld: arch/loongarch/vdso/vgettimeofday.o: in function `vdso_shift_ns': lib/vdso/gettimeofday.c:23:(.text+0x3f8): undefined reference to `__ubsan_handle_shift_out_of_bounds' Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401310530.lZHCj1Zl-lkp@intel.com/ Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Fangrui Song <maskray@google.com> Cc: loongarch@lists.linux.dev Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-06LoongArch: Fix earlycon parameter if KASAN enabledHuacai Chen1-0/+3
The earlycon parameter is based on fixmap, and fixmap addresses are not supposed to be shadowed by KASAN. So return the kasan_early_shadow_page in kasan_mem_to_shadow() if the input address is above FIXADDR_START. Otherwise earlycon cannot work after kasan_init(). Cc: stable@vger.kernel.org Fixes: 5aa4ac64e6add3e ("LoongArch: Add KASAN (Kernel Address Sanitizer) support") Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-06LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]Huacai Chen2-4/+4
With default config, the value of NR_CPUS is 64. When HW platform has more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC is the maximum cpu number in MADT table (max physical number) which can exceed the supported maximum cpu number (NR_CPUS, max logical number), but kernel should not crash. Kernel should boot cpus with NR_CPUS, let the remainder cpus stay in BIOS. The potential crash reason is that the array acpi_core_pic[NR_CPUS] can be overflowed when parsing MADT table, and it is obvious that CORE_PIC should be corresponding to physical core rather than logical core, so it is better to define the array as acpi_core_pic[MAX_CORE_PIC]. With the patch, system can boot up 64 vcpus with qemu parameter -smp 128, otherwise system will crash with the following message. [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192 [ 0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60 [ 0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8 [ 0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005 [ 0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001 [ 0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063 [ 0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98 [ 0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90 [ 0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330 [ 0.000000] ra: 90000000037a46ec platform_init+0x214/0x250 [ 0.000000] ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94 [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 0.000000] BADV: 0000420000004259 [ 0.000000] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec [ 0.000000] 000000000a7fd000 0000000008290000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 00000000019d8000 000000000f556b60 [ 0.000000] 000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000 [ 0.000000] 9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c [ 0.000000] 000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08 [ 0.000000] 9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018 [ 0.000000] 000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000 [ 0.000000] 0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000 [ 0.000000] 000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94 [ 0.000000] [<90000000037a46ec>] platform_init+0x214/0x250 [ 0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c [ 0.000000] [<90000000037a0790>] start_kernel+0x90/0x670 [ 0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-06LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menuMasahiro Yamada1-17/+1
LoongArch missed the refactoring made by commit 282a181b1a0d ("seccomp: Move config option SECCOMP to arch/Kconfig") because LoongArch was not mainlined at that time. The 'depends on PROC_FS' statement is stale as described in that commit. Select HAVE_ARCH_SECCOMP, and remove the duplicated config entry. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-06LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining itMasahiro Yamada1-4/+1
ARCH_ENABLE_THP_MIGRATION is supposed to be selected by arch Kconfig. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-26LoongArch: KVM: Add returns to SIMD stubsRandy Dunlap1-2/+2
The stubs for kvm_own/lsx()/kvm_own_lasx() when CONFIG_CPU_HAS_LSX or CONFIG_CPU_HAS_LASX is not defined should have a return value since they return an int, so add "return -EINVAL;" to the stubs. Fixes the build error: In file included from ../arch/loongarch/include/asm/kvm_csr.h:12, from ../arch/loongarch/kvm/interrupt.c:8: ../arch/loongarch/include/asm/kvm_vcpu.h: In function 'kvm_own_lasx': ../arch/loongarch/include/asm/kvm_vcpu.h:73:39: error: no return statement in function returning non-void [-Werror=return-type] 73 | static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { } Fixes: db1ecca22edf ("LoongArch: KVM: Add LSX (128bit SIMD) support") Fixes: 118e10cd893d ("LoongArch: KVM: Add LASX (256bit SIMD) support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-26LoongArch: KVM: Fix build due to API changesHuacai Chen1-2/+2
Commit 8569992d64b8f750e34b7858eac ("KVM: Use gfn instead of hva for mmu_notifier_retry") replaces mmu_invalidate_retry_hva() usage with mmu_invalidate_retry_gfn() for X86, LoongArch also need similar changes to fix build. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-26LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()Huacai Chen2-7/+10
Machines which have more than 8 nodes fail to boot SMP after commit a2ccf46333d7b2cf96 ("LoongArch/smp: Call rcutree_report_cpu_starting() earlier"). Because such machines use tlb-based per-cpu base address rather than dmw-based per-cpu base address, resulting per-cpu variables can only be accessed after tlb_init(). But rcutree_report_cpu_starting() is now called before tlb_init() and accesses per-cpu variables indeed. Since the original patch want to avoid the lockdep warning caused by page allocation in tlb_init(), we can move rcutree_report_cpu_starting() to tlb_init() where after tlb exception configuration but before page allocation. Fixes: a2ccf46333d7b2cf96 ("LoongArch/smp: Call rcutree_report_cpu_starting() earlier") Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-19Merge tag 'loongarch-6.8' of ↵Linus Torvalds25-77/+1575
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Raise minimum clang version to 18.0.0 - Enable initial Rust support for LoongArch - Add built-in dtb support for LoongArch - Use generic interface to support crashkernel=X,[high,low] - Some bug fixes and other small changes - Update the default config file. * tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits) MAINTAINERS: Add BPF JIT for LOONGARCH entry LoongArch: Update Loongson-3 default config file LoongArch: BPF: Prevent out-of-bounds memory access LoongArch: BPF: Support 64-bit pointers to kfuncs LoongArch: Fix definition of ftrace_regs_set_instruction_pointer() LoongArch: Use generic interface to support crashkernel=X,[high,low] LoongArch: Fix and simplify fcsr initialization on execve() LoongArch: Let cores_io_master cover the largest NR_CPUS LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE LoongArch: Add a missing call to efi_esrt_init() LoongArch: Parsing CPU-related information from DTS LoongArch: dts: DeviceTree for Loongson-2K2000 LoongArch: dts: DeviceTree for Loongson-2K1000 LoongArch: dts: DeviceTree for Loongson-2K0500 LoongArch: Allow device trees be built into the kernel dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names dt-bindings: loongarch: Add Loongson SoC boards compatibles dt-bindings: loongarch: Add CPU bindings for LoongArch LoongArch: Enable initial Rust support ...
2024-01-18Merge tag 'driver-core-6.8-rc1' of ↵Linus Torvalds2-40/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing major in here this release cycle, just lots of small cleanups and some tweaks on kernfs that in the very end, got reverted and will come back in a safer way next release cycle. Included in here are: - more driver core 'const' cleanups and fixes - fw_devlink=rpm is now the default behavior - kernfs tiny changes to remove some string functions - cpu handling in the driver core is updated to work better on many systems that add topologies and cpus after booting - other minor changes and cleanups All of the cpu handling patches have been acked by the respective maintainers and are coming in here in one series. Everything has been in linux-next for a while with no reported issues" * tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits) Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock" kernfs: convert kernfs_idr_lock to an irq safe raw spinlock class: fix use-after-free in class_register() PM: clk: make pm_clk_add_notifier() take a const pointer EDAC: constantify the struct bus_type usage kernfs: fix reference to renamed function driver core: device.h: fix Excess kernel-doc description warning driver core: class: fix Excess kernel-doc description warning driver core: mark remaining local bus_type variables as const driver core: container: make container_subsys const driver core: bus: constantify subsys_register() calls driver core: bus: make bus_sort_breadthfirst() take a const pointer kernfs: d_obtain_alias(NULL) will do the right thing... driver core: Better advertise dev_err_probe() kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy() kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy() kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy() initramfs: Expose retained initrd as sysfs file fs/kernfs/dir: obey S_ISGID kernel/cgroup: use kernfs_create_dir_ns() ...
2024-01-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds12-149/+553
Pull kvm updates from Paolo Bonzini: "Generic: - Use memdup_array_user() to harden against overflow. - Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures. - Clean up Kconfigs that all KVM architectures were selecting - New functionality around "guest_memfd", a new userspace API that creates an anonymous file and returns a file descriptor that refers to it. guest_memfd files are bound to their owning virtual machine, cannot be mapped, read, or written by userspace, and cannot be resized. guest_memfd files do however support PUNCH_HOLE, which can be used to switch a memory area between guest_memfd and regular anonymous memory. - New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify per-page attributes for a given page of guest memory; right now the only attribute is whether the guest expects to access memory via guest_memfd or not, which in Confidential SVMs backed by SEV-SNP, TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM). x86: - Support for "software-protected VMs" that can use the new guest_memfd and page attributes infrastructure. This is mostly useful for testing, since there is no pKVM-like infrastructure to provide a meaningfully reduced TCB. - Fix a relatively benign off-by-one error when splitting huge pages during CLEAR_DIRTY_LOG. - Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE. - Use more generic lockdep assertions in paths that don't actually care about whether the caller is a reader or a writer. - let Xen guests opt out of having PV clock reported as "based on a stable TSC", because some of them don't expect the "TSC stable" bit (added to the pvclock ABI by KVM, but never set by Xen) to be set. - Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL. - Advertise flush-by-ASID support for nSVM unconditionally, as KVM always flushes on nested transitions, i.e. always satisfies flush requests. This allows running bleeding edge versions of VMware Workstation on top of KVM. - Sanity check that the CPU supports flush-by-ASID when enabling SEV support. - On AMD machines with vNMI, always rely on hardware instead of intercepting IRET in some cases to detect unmasking of NMIs - Support for virtualizing Linear Address Masking (LAM) - Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state prior to refreshing the vPMU model. - Fix a double-overflow PMU bug by tracking emulated counter events using a dedicated field instead of snapshotting the "previous" counter. If the hardware PMC count triggers overflow that is recognized in the same VM-Exit that KVM manually bumps an event count, KVM would pend PMIs for both the hardware-triggered overflow and for KVM-triggered overflow. - Turn off KVM_WERROR by default for all configs so that it's not inadvertantly enabled by non-KVM developers, which can be problematic for subsystems that require no regressions for W=1 builds. - Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL "features". - Don't force a masterclock update when a vCPU synchronizes to the current TSC generation, as updating the masterclock can cause kvmclock's time to "jump" unexpectedly, e.g. when userspace hotplugs a pre-created vCPU. - Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths, partly as a super minor optimization, but mostly to make KVM play nice with position independent executable builds. - Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on CONFIG_HYPERV as a minor optimization, and to self-document the code. - Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation" at build time. ARM64: - LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base granule sizes. Branch shared with the arm64 tree. - Large Fine-Grained Trap rework, bringing some sanity to the feature, although there is more to come. This comes with a prefix branch shared with the arm64 tree. - Some additional Nested Virtualization groundwork, mostly introducing the NV2 VNCR support and retargetting the NV support to that version of the architecture. - A small set of vgic fixes and associated cleanups. Loongarch: - Optimization for memslot hugepage checking - Cleanup and fix some HW/SW timer issues - Add LSX/LASX (128bit/256bit SIMD) support RISC-V: - KVM_GET_REG_LIST improvement for vector registers - Generate ISA extension reg_list using macros in get-reg-list selftest - Support for reporting steal time along with selftest s390: - Bugfixes Selftests: - Fix an annoying goof where the NX hugepage test prints out garbage instead of the magic token needed to run the test. - Fix build errors when a header is delete/moved due to a missing flag in the Makefile. - Detect if KVM bugged/killed a selftest's VM and print out a helpful message instead of complaining that a random ioctl() failed. - Annotate the guest printf/assert helpers with __printf(), and fix the various bugs that were lurking due to lack of said annotation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits) x86/kvm: Do not try to disable kvmclock if it was not enabled KVM: x86: add missing "depends on KVM" KVM: fix direction of dependency on MMU notifiers KVM: introduce CONFIG_KVM_COMMON KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache RISC-V: KVM: selftests: Add get-reg-list test for STA registers RISC-V: KVM: selftests: Add steal_time test support RISC-V: KVM: selftests: Add guest_sbi_probe_extension RISC-V: KVM: selftests: Move sbi_ecall to processor.c RISC-V: KVM: Implement SBI STA extension RISC-V: KVM: Add support for SBI STA registers RISC-V: KVM: Add support for SBI extension registers RISC-V: KVM: Add SBI STA info to vcpu_arch RISC-V: KVM: Add steal-update vcpu request RISC-V: KVM: Add SBI STA extension skeleton RISC-V: paravirt: Implement steal-time support RISC-V: Add SBI STA extension definitions RISC-V: paravirt: Add skeleton for pv-time support RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr() ...
2024-01-17LoongArch: Update Loongson-3 default config fileHuacai Chen1-8/+47
1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: BPF: Prevent out-of-bounds memory accessHengqi Chen1-1/+4
The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)ffff80001b894048 insn + 2039 = (struct bpf_insn *)ffff80001b898000 <- end of the page In the build_insn() function, we are trying to access next instruction unconditionally, i.e. `(insn + 1)->imm`. The address lies in the next page and can be not owned by the current process, thus an page fault is inevitable and then segfault. So, let's access next instruction only under `dst = imm64` context. With this fix, we have: # ./test_tag test_tag: OK (40945 tests) Fixes: bbfddb904df6f82 ("LoongArch: BPF: Avoid declare variables in switch-case") Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: BPF: Support 64-bit pointers to kfuncsHengqi Chen1-0/+5
Like commit 1cf3bfc60f9836f ("bpf: Support 64-bit pointers to kfuncs") for s390x, add support for 64-bit pointers to kfuncs for LoongArch. Since the infrastructure is already implemented in BPF core, the only thing need to be done is to override bpf_jit_supports_far_kfunc_call(). Before this change, several test_verifier tests failed: # ./test_verifier | grep # | grep FAIL #119/p calls: invalid kfunc call: ptr_to_mem to struct with non-scalar FAIL #120/p calls: invalid kfunc call: ptr_to_mem to struct with nesting depth > 4 FAIL #121/p calls: invalid kfunc call: ptr_to_mem to struct with FAM FAIL #122/p calls: invalid kfunc call: reg->type != PTR_TO_CTX FAIL #123/p calls: invalid kfunc call: void * not allowed in func proto without mem size arg FAIL #124/p calls: trigger reg2btf_ids[reg->type] for reg->type > __BPF_REG_TYPE_MAX FAIL #125/p calls: invalid kfunc call: reg->off must be zero when passed to release kfunc FAIL #126/p calls: invalid kfunc call: don't match first member type when passed to release kfunc FAIL #127/p calls: invalid kfunc call: PTR_TO_BTF_ID with negative offset FAIL #128/p calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset FAIL #129/p calls: invalid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL #130/p calls: valid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL #486/p map_kptr: ref: reference state created and released on xchg FAIL This is because the kfuncs in the loaded module are far away from __bpf_call_base: ffff800002009440 t bpf_kfunc_call_test_fail1 [bpf_testmod] 9000000002e128d8 T __bpf_call_base The offset relative to __bpf_call_base does NOT fit in s32, which breaks the assumption in BPF core. Enable bpf_jit_supports_far_kfunc_call() lifts this limit. Note that to reproduce the above result, tools/testing/selftests/bpf/config should be applied, and run the test with JIT enabled, unpriv BPF enabled. With this change, the test_verifier tests now all passed: # ./test_verifier ... Summary: 777 PASSED, 0 SKIPPED, 0 FAILED Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: Fix definition of ftrace_regs_set_instruction_pointer()Tiezhu Yang1-1/+1
The current definition of ftrace_regs_set_instruction_pointer() is not correct. Obviously, this function is used to set instruction pointer but not return value, so it should call instruction_pointer_set() instead of regs_set_return_value(). There is no side effect by now because it is only used for kernel live- patching which is not supported, so fix it to avoid failure when testing livepatch in the future. Fixes: 6fbff14a6382 ("LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: Use generic interface to support crashkernel=X,[high,low]Youling Tang3-34/+25
LoongArch already supports two crashkernel regions in kexec-tools, so we can directly use the common interface to support crashkernel=X,[high,low] after commit 0ab97169aa0517079b ("crash_core: add generic function to do reservation"). With the help of newly changed function parse_crashkernel() and generic reserve_crashkernel_generic(), crashkernel reservation can be simplified by steps: 1) Add a new header file <asm/crash_core.h>, then define CRASH_ALIGN, CRASH_ADDR_LOW_MAX and CRASH_ADDR_HIGH_MAX and in <asm/crash_core.h>; 2) Add arch_reserve_crashkernel() to call parse_crashkernel() and reserve_crashkernel_generic(); 3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in arch/loongarch/Kconfig. One can reserve the crash kernel from high memory above DMA zone range by explicitly passing "crashkernel=X,high"; or reserve a memory range below 4G with "crashkernel=X,low". Besides, there are few rules need to take notice: 1) "crashkernel=X,[high,low]" will be ignored if "crashkernel=size" is specified. 2) "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed and there is enough memory to be allocated under 4G. 3) When allocating crashkernel above 4G and no "crashkernel=X,low" is specified, a 128M low memory will be allocated automatically for swiotlb bounce buffer. See Documentation/admin-guide/kernel-parameters.txt for more information. Following test cases have been performed as expected: 1) crashkernel=256M //low=256M 2) crashkernel=1G //low=1G 3) crashkernel=4G //high=4G, low=128M(default) 4) crashkernel=4G crashkernel=256M,high //high=4G, low=128M(default), high is ignored 5) crashkernel=4G crashkernel=256M,low //high=4G, low=128M(default), low is ignored 6) crashkernel=4G,high //high=4G, low=128M(default) 7) crashkernel=256M,low //low=0M, invalid 8) crashkernel=4G,high crashkernel=256M,low //high=4G, low=256M 9) crashkernel=4G,high crashkernel=4G,low //high=0M, low=0M, invalid 10) crashkernel=512M@2560M //low=512M 11) crashkernel=1G,high crashkernel=0M,low //high=1G, low=0M Recommended usage in general: 1) In the case of small memory: crashkernel=512M 2) In the case of large memory: crashkernel=1024M,high crashkernel=128M,low Signed-off-by: Youling Tang <tangyouling@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: Fix and simplify fcsr initialization on execve()Xi Ruoyao3-10/+1
There has been a lingering bug in LoongArch Linux systems causing some GCC tests to intermittently fail (see Closes link). I've made a minimal reproducer: zsh% cat measure.s .align 4 .globl _start _start: movfcsr2gr $a0, $fcsr0 bstrpick.w $a0, $a0, 16, 16 beqz $a0, .ok break 0 .ok: li.w $a7, 93 syscall 0 zsh% cc mesaure.s -o measure -nostdlib zsh% echo $((1.0/3)) 0.33333333333333331 zsh% while ./measure; do ; done This while loop should not stop as POSIX is clear that execve must set fenv to the default, where FCSR should be zero. But in fact it will just stop after running for a while (normally less than 30 seconds). Note that "$((1.0/3))" is needed to reproduce this issue because it raises FE_INVALID and makes fcsr0 non-zero. The problem is we are currently relying on SET_PERSONALITY2() to reset current->thread.fpu.fcsr. But SET_PERSONALITY2() is executed before start_thread which calls lose_fpu(0). We can see if kernel preempt is enabled, we may switch to another thread after SET_PERSONALITY2() but before lose_fpu(0). Then bad thing happens: during the thread switch the value of the fcsr0 register is stored into current->thread.fpu.fcsr, making it dirty again. The issue can be fixed by setting current->thread.fpu.fcsr after lose_fpu(0) because lose_fpu() clears TIF_USEDFPU, then the thread switch won't touch current->thread.fpu.fcsr. The only other architecture setting FCSR in SET_PERSONALITY2() is MIPS. I've ran a similar test on MIPS with mainline kernel and it turns out MIPS is buggy, too. Anyway MIPS do this for supporting different FP flavors (NaN encodings, etc.) which do not exist on LoongArch. So for LoongArch, we can simply remove the current->thread.fpu.fcsr setting from SET_PERSONALITY2() and do it in start_thread(), after lose_fpu(0). The while loop failing with the mainline kernel has survived one hour after this change on LoongArch. Fixes: 803b0fc5c3f2baa ("LoongArch: Add process management") Closes: https://github.com/loongson-community/discussions/issues/7 Link: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/ Cc: stable@vger.kernel.org Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: Let cores_io_master cover the largest NR_CPUSHuacai Chen3-4/+6
Now loongson_system_configuration::cores_io_master only covers 64 cpus, if NR_CPUS > 64 there will be memory corruption. So let cores_io_master cover the largest NR_CPUS (256). Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZEHuacai Chen2-12/+10
LoongArch has hardware page coloring for L1 Cache, so we don't have cache aliases. But SFB (Store Fill Buffer) still has aliases. So we define SHMLBA to SZ_64K previously. But there are losts of applications use PAGE_SIZE rather than SHMLBA to mmap() file pages and shared pages. Of course we can fix them one by one, but not easy. On the other hand, we can simply disable SFB for 4KB page size to fix cache alias (there will be performance decrease, but acceptable), and in future we will fix SFB in hardware. So we can safely define SHMLBA to PAGE_SIZE (use the generic shmparam.h) to make life easier. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: Add a missing call to efi_esrt_init()Huacai Chen1-0/+2
ESRT (EFI System Resource Table) is needed for UEFI's "Capsule Update" feature. But ESRT initialization is missing on LoongArch now, so add a call to efi_esrt_init() at the end of efi_init(). Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: Parsing CPU-related information from DTSBinbin Zhou2-1/+36
Generally, we can get cpu-related information, such as model name, from /proc/cpuinfo. For FDT-based systems, we need to parse the relevant information from DTS. BTW, set loongson_sysconf.cores_per_package to num_processors if SMBIOS doesn't provide a valid number (usually FDT-based systems). Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: dts: DeviceTree for Loongson-2K2000Binbin Zhou3-1/+373
Add DeviceTree file for Loongson-2K2000 processor, which integrates two 64-bit 3-issue superscalar LA364 processor cores. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: dts: DeviceTree for Loongson-2K1000Binbin Zhou3-1/+676
Add DeviceTree file for Loongson-2K1000 processor, which integrates two 64-bit 2-issue superscalar LA264 processor cores. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: dts: DeviceTree for Loongson-2K0500Binbin Zhou3-0/+356
Add DeviceTree file for Loongson-2K0500 processor, which integrates one 64-bit 2-issue superscalar LA264 processor core. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: Allow device trees be built into the kernelBinbin Zhou5-6/+31
During the upstream progress of those DT-based drivers, DT properties are changed a lot so very different from those in existing bootloaders. It is inevitably that some existing systems do not provide a standard, canonical device tree to the kernel at boot time. So let's provide a device tree table in the kernel, keyed by the dts filename, containing the relevant DTBs. We can use the built-in dts files as references. Each SoC has only one built-in dts file which describes all possible device information of that SoC, so the dts files are good examples during development. And as a reference, our built-in dts file only enables the most basic bootable combinations (so it is generic enough), acts as an alternative in case the dts in the bootloader is unexpected. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17LoongArch: Enable initial Rust supportWANG Rui2-0/+4
Enable initial Rust support for LoongArch. Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-11Merge tag 'net-next-6.8' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs reorganization and a significant amount of changes is around self-tests. Core & protocols: - Analyze and reorganize core networking structs (socks, netdev, netns, mibs) to optimize cacheline consumption and set up build time warnings to safeguard against future header changes This improves TCP performances with many concurrent connections up to 40% - Add page-pool netlink-based introspection, exposing the memory usage and recycling stats. This helps indentify bad PP users and possible leaks - Refine TCP/DCCP source port selection to no longer favor even source port at connect() time when IP_LOCAL_PORT_RANGE is set. This lowers the time taken by connect() for hosts having many active connections to the same destination - Refactor the TCP bind conflict code, shrinking related socket structs - Refactor TCP SYN-Cookie handling, as a preparation step to allow arbitrary SYN-Cookie processing via eBPF - Tune optmem_max for 0-copy usage, increasing the default value to 128KB and namespecifying it - Allow coalescing for cloned skbs coming from page pools, improving RX performances with some common configurations - Reduce extension header parsing overhead at GRO time - Add bridge MDB bulk deletion support, allowing user-space to request the deletion of matching entries - Reorder nftables struct members, to keep data accessed by the datapath first - Introduce TC block ports tracking and use. This allows supporting multicast-like behavior at the TC layer - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and classifiers (RSVP and tcindex) - More data-race annotations - Extend the diag interface to dump TCP bound-only sockets - Conditional notification of events for TC qdisc class and actions - Support for WPAN dynamic associations with nearby devices, to form a sub-network using a specific PAN ID - Implement SMCv2.1 virtual ISM device support - Add support for Batman-avd mulicast packet type BPF: - Tons of verifier improvements: - BPF register bounds logic and range support along with a large test suite - log improvements - complete precision tracking support for register spills - track aligned STACK_ZERO cases as imprecise spilled registers. This improves the verifier "instructions processed" metric from single digit to 50-60% for some programs - support for user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience - support tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like - several fixes - Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload - Fix kCFI bugs in BPF all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y - Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques - Support uid/gid options when mounting bpffs - Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id - Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext - Add BPF link_info support for uprobe multi link along with bpftool integration for the latter - Support for VLAN tag in XDP hints - Remove deprecated bpfilter kernel leftovers given the project is developed in user-space (https://github.com/facebook/bpfilter) Misc: - Support for parellel TC self-tests execution - Increase MPTCP self-tests coverage - Updated the bridge documentation, including several so-far undocumented features - Convert all the net self-tests to run in unique netns, to avoid random failures due to conflict and allow concurrent runs - Add TCP-AO self-tests - Add kunit tests for both cfg80211 and mac80211 - Autogenerate Netlink families documentation from YAML spec - Add yml-gen support for fixed headers and recursive nests, the tool can now generate user-space code for all genetlink families for which we have specs - A bunch of additional module descriptions fixes - Catch incorrect freeing of pages belonging to a page pool Driver API: - Rust abstractions for network PHY drivers; do not cover yet the full C API, but already allow implementing functional PHY drivers in rust - Introduce queue and NAPI support in the netdev Netlink interface, allowing complete access to the device <> NAPIs <> queues relationship - Introduce notifications filtering for devlink to allow control application scale to thousands of instances - Improve PHY validation, requesting rate matching information for each ethtool link mode supported by both the PHY and host - Add support for ethtool symmetric-xor RSS hash - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD platform - Expose pin fractional frequency offset value over new DPLL generic netlink attribute - Convert older drivers to platform remove callback returning void - Add support for PHY package MMD read/write New hardware / drivers: - Ethernet: - Octeon CN10K devices - Broadcom 5760X P7 - Qualcomm SM8550 SoC - Texas Instrument DP83TG720S PHY - Bluetooth: - IMC Networks Bluetooth radio Removed: - WiFi: - libertas 16-bit PCMCIA support - Atmel at76c50x drivers - HostAP ISA/PCMCIA style 802.11b driver - zd1201 802.11b USB dongles - Orinoco ISA/PCMCIA 802.11b driver - Aviator/Raytheon driver - Planet WL3501 driver - RNDIS USB 802.11b driver Driver updates: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - allow one by one port representors creation and removal - add temperature and clock information reporting - add get/set for ethtool's header split ringparam - add again FW logging - adds support switchdev hardware packet mirroring - iavf: implement symmetric-xor RSS hash - igc: add support for concurrent physical and free-running timers - i40e: increase the allowable descriptors - nVidia/Mellanox: - Preparation for Socket-Direct multi-dev netdev. That will allow in future releases combining multiple PFs devices attached to different NUMA nodes under the same netdev - Broadcom (bnxt): - TX completion handling improvements - add basic ntuple filter support - reduce MSIX vectors usage for MQPRIO offload - add VXLAN support, USO offload and TX coalesce completion for P7 - Marvell Octeon EP: - xmit-more support - add PF-VF mailbox support and use it for FW notifications for VFs - Wangxun (ngbe/txgbe): - implement ethtool functions to operate pause param, ring param, coalesce channel number and msglevel - Netronome/Corigine (nfp): - add flow-steering support - support UDP segmentation offload - Ethernet NICs embedded, slower, virtual: - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver - stmmac: add support for HW-accelerated VLAN stripping - TI AM654x sw: add mqprio, frame preemption & coalescing - gve: add support for non-4k page sizes. - virtio-net: support dynamic coalescing moderation - nVidia/Mellanox Ethernet datacenter switches: - allow firmware upgrade without a reboot - more flexible support for bridge flooding via the compressed FID flooding mode - Ethernet embedded switches: - Microchip: - fine-tune flow control and speed configurations in KSZ8xxx - KSZ88X3: enable setting rmii reference - Renesas: - add jumbo frames support - Marvell: - 88E6xxx: add "eth-mac" and "rmon" stats support - Ethernet PHYs: - aquantia: add firmware load support - at803x: refactor the driver to simplify adding support for more chip variants - NXP C45 TJA11xx: Add MACsec offload support - Wifi: - MediaTek (mt76): - NVMEM EEPROM improvements - mt7996 Extremely High Throughput (EHT) improvements - mt7996 Wireless Ethernet Dispatcher (WED) support - mt7996 36-bit DMA support - Qualcomm (ath12k): - support for a single MSI vector - WCN7850: support AP mode - Intel (iwlwifi): - new debugfs file fw_dbg_clear - allow concurrent P2P operation on DFS channels - Bluetooth: - QCA2066: support HFP offload - ISO: more broadcast-related improvements - NXP: better recovery in case receiver/transmitter get out of sync" * tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits) lan78xx: remove redundant statement in lan78xx_get_eee lan743x: remove redundant statement in lan743x_ethtool_get_eee bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer() bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel() bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter() tcp: Revert no longer abort SYN_SENT when receiving some ICMP Revert "mlx5 updates 2023-12-20" Revert "net: stmmac: Enable Per DMA Channel interrupt" ipvlan: Remove usage of the deprecated ida_simple_xx() API ipvlan: Fix a typo in a comment net/sched: Remove ipt action tests net: stmmac: Use interrupt mode INTM=1 for per channel irq net: stmmac: Add support for TX/RX channel interrupt net: stmmac: Make MSI interrupt routine generic dt-bindings: net: snps,dwmac: per channel irq net: phy: at803x: make read_status more generic net: phy: at803x: add support for cdt cross short test for qca808x net: phy: at803x: refactor qca808x cable test get status function net: phy: at803x: generalize cdt fault length function net: ethernet: cortina: Drop TSO support ...
2024-01-10Merge tag 'asm-generic-6.8' of ↵Linus Torvalds2-19/+14
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "A series from Baoquan He cleans up the asm-generic/io.h to remove the ioremap_uc() definition from everything except x86, which still needs it for pre-PAT systems. This series notably contains a patch from Jiaxun Yang that converts MIPS to use asm-generic/io.h like every other architecture does, enabling future cleanups. Some of my own patches fix -Wmissing-prototype warnings in architecture specific code across several architectures. This is now needed as the warning is enabled by default. There are still some remaining warnings in minor platforms, but the series should catch most of the widely used ones make them more consistent with one another. David McKay fixes a bug in __generic_cmpxchg_local() when this is used on 64-bit architectures. This could currently only affect parisc64 and sparc64. Additional cleanups address from Linus Walleij, Uwe Kleine-König, Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies between architectures" * tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: Fix 32 bit __generic_cmpxchg_local Hexagon: Make pfn accessors statics inlines ARC: mm: Make virt_to_pfn() a static inline mips: remove extraneous asm-generic/iomap.h include sparc: Use $(kecho) to announce kernel images being ready arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes csky: fix arch_jump_label_transform_static override arch: add do_page_fault prototypes arch: add missing prepare_ftrace_return() prototypes arch: vdso: consolidate gettime prototypes arch: include linux/cpu.h for trap_init() prototype arch: fix asm-offsets.c building with -Wmissing-prototypes arch: consolidate arch_irq_work_raise prototypes hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() mips: io: remove duplicated codes arch/*/io.h: remove ioremap_uc in some architectures mips: add <asm-generic/io.h> including
2024-01-10Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefsLinus Torvalds1-0/+1
Pull header cleanups from Kent Overstreet: "The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies" * tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits) Kill sched.h dependency on rcupdate.h kill unnecessary thread_info.h include Kill unnecessary kernel.h include preempt.h: Kill dependency on list.h rseq: Split out rseq.h from sched.h LoongArch: signal.c: add header file to fix build error restart_block: Trim includes lockdep: move held_lock to lockdep_types.h sem: Split out sem_types.h uidgid: Split out uidgid_types.h seccomp: Split out seccomp_types.h refcount: Split out refcount_types.h uapi/linux/resource.h: fix include x86/signal: kill dependency on time.h syscall_user_dispatch.h: split out *_types.h mm_types_task.h: Trim dependencies Split out irqflags_types.h ipc: Kill bogus dependency on spinlock.h shm: Slim down dependencies workqueue: Split out workqueue_types.h ...
2024-01-09Merge tag 'efi-next-for-v6.8' of ↵Linus Torvalds4-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: - Fix a syzbot reported issue in efivarfs where concurrent accesses to the file system resulted in list corruption - Add support for accessing EFI variables via the TEE subsystem (and a trusted application in the secure world) instead of via EFI runtime firmware running in the OS's execution context - Avoid linker tricks to discover the image base on LoongArch * tag 'efi-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: memmap: fix kernel-doc warnings efi/loongarch: Directly position the loaded image file efivarfs: automatically update super block flag efi: Add tee-based EFI variable driver efi: Add EFI_ACCESS_DENIED status code efi: expose efivar generic ops register function efivarfs: Move efivarfs list into superblock s_fs_info efivarfs: Free s_fs_info on unmount efivarfs: Move efivar availability check into FS context init efivarfs: force RO when remounting if SetVariable is not supported
2024-01-09Merge tag 'mm-stable-2024-01-08-15-31' of ↵Linus Torvalds2-27/+2
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Peng Zhang has done some mapletree maintainance work in the series 'maple_tree: add mt_free_one() and mt_attr() helpers' 'Some cleanups of maple tree' - In the series 'mm: use memmap_on_memory semantics for dax/kmem' Vishal Verma has altered the interworking between memory-hotplug and dax/kmem so that newly added 'device memory' can more easily have its memmap placed within that newly added memory. - Matthew Wilcox continues folio-related work (including a few fixes) in the patch series 'Add folio_zero_tail() and folio_fill_tail()' 'Make folio_start_writeback return void' 'Fix fault handler's handling of poisoned tail pages' 'Convert aops->error_remove_page to ->error_remove_folio' 'Finish two folio conversions' 'More swap folio conversions' - Kefeng Wang has also contributed folio-related work in the series 'mm: cleanup and use more folio in page fault' - Jim Cromie has improved the kmemleak reporting output in the series 'tweak kmemleak report format'. - In the series 'stackdepot: allow evicting stack traces' Andrey Konovalov to permits clients (in this case KASAN) to cause eviction of no longer needed stack traces. - Charan Teja Kalla has fixed some accounting issues in the page allocator's atomic reserve calculations in the series 'mm: page_alloc: fixes for high atomic reserve caluculations'. - Dmitry Rokosov has added to the samples/ dorectory some sample code for a userspace memcg event listener application. See the series 'samples: introduce cgroup events listeners'. - Some mapletree maintanance work from Liam Howlett in the series 'maple_tree: iterator state changes'. - Nhat Pham has improved zswap's approach to writeback in the series 'workload-specific and memory pressure-driven zswap writeback'. - DAMON/DAMOS feature and maintenance work from SeongJae Park in the series 'mm/damon: let users feed and tame/auto-tune DAMOS' 'selftests/damon: add Python-written DAMON functionality tests' 'mm/damon: misc updates for 6.8' - Yosry Ahmed has improved memcg's stats flushing in the series 'mm: memcg: subtree stats flushing and thresholds'. - In the series 'Multi-size THP for anonymous memory' Ryan Roberts has added a runtime opt-in feature to transparent hugepages which improves performance by allocating larger chunks of memory during anonymous page faults. - Matthew Wilcox has also contributed some cleanup and maintenance work against eh buffer_head code int he series 'More buffer_head cleanups'. - Suren Baghdasaryan has done work on Andrea Arcangeli's series 'userfaultfd move option'. UFFDIO_MOVE permits userspace heap compaction algorithms to move userspace's pages around rather than UFFDIO_COPY'a alloc/copy/free. - Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm: Add ksm advisor'. This is a governor which tunes KSM's scanning aggressiveness in response to userspace's current needs. - Chengming Zhou has optimized zswap's temporary working memory use in the series 'mm/zswap: dstmem reuse optimizations and cleanups'. - Matthew Wilcox has performed some maintenance work on the writeback code, both code and within filesystems. The series is 'Clean up the writeback paths'. - Andrey Konovalov has optimized KASAN's handling of alloc and free stack traces for secondary-level allocators, in the series 'kasan: save mempool stack traces'. - Andrey also performed some KASAN maintenance work in the series 'kasan: assorted clean-ups'. - David Hildenbrand has gone to town on the rmap code. Cleanups, more pte batching, folio conversions and more. See the series 'mm/rmap: interface overhaul'. - Kinsey Ho has contributed some maintenance work on the MGLRU code in the series 'mm/mglru: Kconfig cleanup'. - Matthew Wilcox has contributed lruvec page accounting code cleanups in the series 'Remove some lruvec page accounting functions'" * tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits) mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER mm, treewide: introduce NR_PAGE_ORDERS selftests/mm: add separate UFFDIO_MOVE test for PMD splitting selftests/mm: skip test if application doesn't has root privileges selftests/mm: conform test to TAP format output selftests: mm: hugepage-mmap: conform to TAP format output selftests/mm: gup_test: conform test to TAP format output mm/selftests: hugepage-mremap: conform test to TAP format output mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large mm/memcontrol: remove __mod_lruvec_page_state() mm/khugepaged: use a folio more in collapse_file() slub: use a folio in __kmalloc_large_node slub: use folio APIs in free_large_kmalloc() slub: use alloc_pages_node() in alloc_slab_page() mm: remove inc/dec lruvec page state functions mm: ratelimit stat flush from workingset shrinker kasan: stop leaking stack trace handles mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE mm/mglru: add dummy pmd_dirty() ...
2024-01-08KVM: introduce CONFIG_KVM_COMMONPaolo Bonzini1-1/+1
CONFIG_HAVE_KVM is currently used by some architectures to either enabled the KVM config proper, or to enable host-side code that is not part of the KVM module. However, CONFIG_KVM's "select" statement in virt/kvm/Kconfig corresponds to a third meaning, namely to enable common Kconfigs required by all architectures that support KVM. These three meanings can be replaced respectively by an architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by a new Kconfig symbol that is in turn selected by the architecture-specific "config KVM". Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON. Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by architecture code, and it brings in all dependencies of common KVM code. In particular, INTERVAL_TREE was missing in loongarch and riscv, so that is another thing that is fixed. Fixes: 8132d887a702 ("KVM: remove CONFIG_HAVE_KVM_EVENTFD", 2023-12-08) Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/all/44907c6b-c5bd-4e4a-a921-e4d3825539d8@infradead.org/ Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-01-05mm/mglru: add dummy pmd_dirty()Kinsey Ho1-0/+1
Add dummy pmd_dirty() for architectures that don't provide it. This is similar to commit 6617da8fb565 ("mm: add dummy pmd_young() for architectures not having it"). Link: https://lkml.kernel.org/r/20231227141205.2200125-5-kinseyho@google.com Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312210606.1Etqz3M4-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202312210042.xQEiqlEh-lkp@intel.com/ Signed-off-by: Kinsey Ho <kinseyho@google.com> Suggested-by: Yu Zhao <yuzhao@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-04bpfilter: remove bpfilterQuentin Deslandes1-1/+0
bpfilter was supposed to convert iptables filtering rules into BPF programs on the fly, from the kernel, through a usermode helper. The base code for the UMH was introduced in 2018, and couple of attempts (2, 3) tried to introduce the BPF program generate features but were abandoned. bpfilter now sits in a kernel tree unused and unusable, occasionally causing confusion amongst Linux users (4, 5). As bpfilter is now developed in a dedicated repository on GitHub (6), it was suggested a couple of times this year (LSFMM/BPF 2023, LPC 2023) to remove the deprecated kernel part of the project. This is the purpose of this patch. [1]: https://lore.kernel.org/lkml/20180522022230.2492505-1-ast@kernel.org/ [2]: https://lore.kernel.org/bpf/20210829183608.2297877-1-me@ubique.spb.ru/#t [3]: https://lore.kernel.org/lkml/20221224000402.476079-1-qde@naccy.de/ [4]: https://dxuuu.xyz/bpfilter.html [5]: https://github.com/linuxkit/linuxkit/pull/3904 [6]: https://github.com/facebook/bpfilter Signed-off-by: Quentin Deslandes <qde@naccy.de> Link: https://lore.kernel.org/r/20231226130745.465988-1-qde@naccy.de Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-02Merge tag 'loongarch-kvm-6.8' of ↵Paolo Bonzini26-193/+595
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.8 1. Optimization for memslot hugepage checking. 2. Cleanup and fix some HW/SW timer issues. 3. Add LSX/LASX (128bit/256bit SIMD) support.
2024-01-02net/sched: Remove CONFIG_NET_ACT_IPT from default configsJamal Hadi Salim1-1/+0
Now that we are retiring the IPT action. Reviewed-by: Victor Noguiera <victor@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27LoongArch: signal.c: add header file to fix build errorRandy Dunlap1-0/+1
loongarch's signal.c uses rseq_signal_deliver() so it should pull in the appropriate header to prevent a build error: ../arch/loongarch/kernel/signal.c: In function 'handle_signal': ../arch/loongarch/kernel/signal.c:1034:9: error: implicit declaration of function 'rseq_signal_deliver' [-Werror=implicit-function-declaration] 1034 | rseq_signal_deliver(ksig, regs); | ^~~~~~~~~~~~~~~~~~~ Fixes: b74baf4ad05b ("LoongArch: Add signal handling support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: loongarch@lists.linux.dev Cc: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-20sync mm-stable with mm-hotfixes-stable to pick up depended-upon changesAndrew Morton1-1/+1
2023-12-19efi/loongarch: Directly position the loaded image fileWang Yao4-5/+0
The use of the 'kernel_offset' variable to position the image file that has been loaded by UEFI or GRUB is unnecessary, because we can directly position the loaded image file through using the image_base field of the efi_loaded_image struct provided by UEFI. Replace kernel_offset with image_base to position the image file that has been loaded by UEFI or GRUB. Signed-off-by: Wang Yao <wangyao@lemote.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-12-19LoongArch: KVM: Add LASX (256bit SIMD) supportTianrui Zhao7-4/+103
This patch adds LASX (256bit SIMD) support for LoongArch KVM. There will be LASX exception in KVM when guest use the LASX instructions. KVM will enable LASX and restore the vector registers for guest and then return to guest to continue running. Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-19LoongArch: KVM: Add LSX (128bit SIMD) supportTianrui Zhao8-8/+280
This patch adds LSX (128bit SIMD) support for LoongArch KVM. There will be LSX exception in KVM when guest use the LSX instructions. KVM will enable LSX and restore the vector registers for guest and then return to guest to continue running. Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-19LoongArch: KVM: Fix timer emulation with oneshot modeBibo Mao1-13/+55
When timer is fired in oneshot mode, CSR TVAL will be -1 rather than 0. There needs special handing for this situation. There are two scenarios when oneshot timer is fired. One scenario is that time is fired after exiting to host, CSR TVAL is set with 0 in order to inject hw interrupt, and -1 will assigned to CSR TVAL soon. The other situation is that timer is fired in VM and guest kernel is hanlding timer IRQ, IRQ is acked and is ready to set next expired timer value, then vm exits to host. Timer interrupt should not be inject at this point, else there will be spurious timer interrupt. Here hw timer irq status in CSR ESTAT is used to judge these two scenarios. If CSR TVAL is -1, the oneshot timer is fired; and if timer hw irq is on in CSR ESTAT register, it happens after exiting to host; else if timer hw irq is off, we think that it happens in vm and timer IRQ handler has already acked IRQ. With this patch, runltp with version ltp20230516 passes to run in vm. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-19LoongArch: KVM: Remove kvm_acquire_timer() before entering guestBibo Mao3-46/+6
Timer emulation method in VM is switch to SW timer, there are two places where timer emulation is needed. One is during vcpu thread context switch, the other is halt-polling with idle instruction emulation. SW timer switching is removed during halt-polling mode, so it is not necessary to disable SW timer before entering to guest. This patch removes SW timer handling before entering guest mode, and put it in HW timer restoring flow when vcpu thread is sched-in. With this patch, vm timer emulation is simpler, there is SW/HW timer switch only in vcpu thread context switch scenario. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-19LoongArch: KVM: Allow to access HW timer CSR registers alwaysBibo Mao2-22/+6
Currently HW timer CSR registers are allowed to access before entering to vm and disabled if switch to SW timer in host mode, instead it is not necessary to do so. HW timer CSR registers can be accessed always, it is nothing to do with whether it is in vm mode or host mode. This patch removes the limitation. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-19LoongArch: KVM: Remove SW timer switch when vcpu is halt pollingBibo Mao3-15/+19
With halt-polling supported, there is checking for pending events or interrupts when vcpu executes idle instruction. Pending interrupts include injected SW interrupts and passthrough HW interrupts, such as HW timer interrupts, since HW timer works still even if vcpu exists from VM mode. Since HW timer pending interrupt can be set directly with CSR status register, and pending HW timer interrupt checking is used in vcpu block checking function, it is not necessary to switch to SW timer during halt-polling. This patch adds preemption disabling in function kvm_cpu_has_pending_timer(), and removes SW timer switching in idle instruction emulation function. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-19LoongArch: KVM: Optimization for memslot hugepage checkingBibo Mao2-41/+86
During shadow mmu page fault, there is checking for huge page for specified memslot. Page fault is hot path, check logic can be done when memslot is created. Here two flags are added for huge page checking, KVM_MEM_HUGEPAGE_CAPABLE and KVM_MEM_HUGEPAGE_INCAPABLE. Indeed for an optimized qemu, memslot for DRAM is always huge page aligned. The flag is firstly checked during hot page fault path. Now only huge page flag is supported, there is a long way for super page support in LoongArch system. Since super page size is 64G for 16K pagesize and 1G for 4K pagesize, 64G physical address is rarely used and LoongArch kernel needs support super page for 4K. Also memory layout of LoongArch qemu VM should be 1G aligned. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-15Merge tag 'mm-hotfixes-stable-2023-12-15-07-11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6 issues" * tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/mglru: reclaim offlined memcgs harder mm/mglru: respect min_ttl_ms with memcgs mm/mglru: try to stop at high watermarks mm/mglru: fix underprotected page cache mm/shmem: fix race in shmem_undo_range w/THP Revert "selftests: error out if kernel header files are not yet built" crash_core: fix the check for whether crashkernel is from high memory x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC loongarch, kexec: change dependency of object files mm/damon/core: make damon_start() waits until kdamond_fn() starts selftests/mm: cow: print ksft header before printing anything else mm: fix VMA heap bounds checking riscv: fix VMALLOC_START definition kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP
2023-12-13Merge tag 'efi-urgent-for-v6.7-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - Deal with a regression in the recently refactored x86 EFI stub code on older Dell systems by disabling randomization of the physical load address - Use the correct load address for relocatable Loongarch kernels * tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/x86: Avoid physical KASLR on older Dell systems efi/loongarch: Use load address to calculate kernel entry address
2023-12-12loongarch, kexec: change dependency of object filesBaoquan He1-1/+1
Patch series "kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC". The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be dropped, then compiling errors will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === E.g on mips, below link error are seen: -------------------------------------------------------------------- mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free': kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup' mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec': kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown' mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec' mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec': kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown' mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec' -------------------------------------------------------------------- Here, change the incorrect dependency of building kexec_core related object files, and the ifdeffery on architectures from CONFIG_KEXEC to CONFIG_KEXEC_CORE. Testing: ======== Passed on mips and loognarch with the LKP reproducer. This patch (of 5): Currently, in arch/loongarch/kernel/Makefile, building machine_kexec.o relocate_kernel.o depends on CONFIG_KEXEC. Whereas, since we will drop the select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec, compiling error will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === --------------------------------------------------------------- loongarch64-linux-ld: kernel/kexec_core.o: in function `.L209': >> kexec_core.c:(.text+0x1660): undefined reference to `machine_kexec_cleanup' loongarch64-linux-ld: kernel/kexec_core.o: in function `.L287': >> kexec_core.c:(.text+0x1c5c): undefined reference to `machine_crash_shutdown' >> loongarch64-linux-ld: kexec_core.c:(.text+0x1c64): undefined reference to `machine_kexec' loongarch64-linux-ld: kernel/kexec_core.o: in function `.L2^B5': >> kexec_core.c:(.text+0x2090): undefined reference to `machine_shutdown' loongarch64-linux-ld: kexec_core.c:(.text+0x20a0): undefined reference to `machine_kexec' --------------------------------------------------------------- Here, change the dependency of machine_kexec.o relocate_kernel.o to CONFIG_KEXEC_CORE can fix above building error. Link: https://lkml.kernel.org/r/20231208073036.7884-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20231208073036.7884-2-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311300946.kHE9Iu71-lkp@intel.com/ Cc: Eric DeVolder <eric_devolder@yahoo.com> Cc: Ignat Korchagin <ignat@cloudflare.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 05:42:23 +0000