summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksourceKeerthy1-1/+0
Move the dmtimer driver out of plat-omap to clocksource. So that non-omap devices also could use this. No Code changes done to the driver file only renamed to timer-ti-dm.c. Also removed the config dependencies for OMAP_DM_TIMER. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Ladislav Michl <ladis@linux-mips.org> [tony@atomide.com: add select omap_dm_timer for omap16xx] Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-10ARM: OMAP2+: Remove legacy i2c.c platform init codeTony Lindgren1-3/+0
We can now initialize I2C for mach-omap2 using device tree. And we can move the remaining code in plat-omap/i2c.c into mach-omap1/i2c.c. Note that we cannot remove some of the I2C bus reset functions as they are being used by hwmod code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-02kbuild: remove unnecessary variable initializaionsMasahiro Yamada1-3/+0
Clearing obj-y, obj-m, obj-n, obj- in each Makefile is a useless habit. They are non-exported variables; therefore they are always empty whenever descending into each subdirectory. (Moreorver, obj-y and obj-m are also set to empty at the beginning of scripts/Makefile.build) Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Peter Foley <pefoley2@pefoley.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-11mailbox/omap: move the OMAP mailbox framework to driversSuman Anna1-3/+0
The mailbox hardware (in OMAP) uses a queued mailbox interrupt mechanism that provides a communication channel between processors through a set of registers and their associated interrupt signals by sending and receiving messages. The OMAP mailbox framework/driver code is moved to be under drivers/mailbox, in preparation for adapting to a common mailbox driver framework. This allows the build for OMAP mailbox to be enabled (it was disabled during the multi-platform support). As part of the migration from plat and mach code: - Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers. - mailbox.h under plat-omap/plat/include has been split into a public and private header files. The public header has only the API related functions and types. - The module name mailbox.ko from plat-omap is changed to omap-mailbox.ko - The module name mailbox_mach.ko from mach-omapX is changed as mailbox_omap1.ko for OMAP1 mailbox_omap2.ko for OMAP2+ Cc: Tony Lindgren <tony@atomide.com> [gregkh@linuxfoundation.org: ack for staging part] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com> Signed-off-by: Suman Anna <s-anna@ti.com>
2013-01-11ARM: OMAP2+: Enable ARCH_MULTIPLATFORM supportTony Lindgren1-0/+2
Flip on multiplatform support for omap2+. No changes to omap2plus_defconfig needed, but please note that you may need to update your custom config files to make sure you have: CONFIG_ARCH_MULTIPLATFORM=y CONFIG_ARCH_MULTI_V7=y CONFIG_ARCH_OMAP2PLUS=y And may need CONFIG_ARCH_MULTI_V6=y if booting omap2 boards. Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-30Merge tag 'omap-late-cleanups' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM cleanups for omap from Olof Johansson: "From Tony Lindgren: Here are few more patches to finish the omap changes for multiplatform conversion that are not strictly fixes, but were too complex to do with the dependencies during the merge window. Those are to move of serial-omap.h to platform_data, and the removal of remaining cpu_is_omap macro usage outside mach-omap2. Then there are several trivial fixes for typos and few minimal omap2plus_defconfig updates." * tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON OMAP2: Fix a typo - replace regist with register. ARM/omap: use module_platform_driver macro ARM: OMAP2+: PMU: Remove unused header ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support ARM: OMAP2+: enable devtmpfs and devtmpfs automount ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER ARM: OMAP2+: Drop plat/cpu.h for omap2plus ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage MAINTAINERS: Add an entry for omap related .dts files
2012-12-17ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usageTony Lindgren1-1/+1
Looks like we missed plat-omap/fb.c for cpu_is_omap usage mach-omap2. This is the last user of cpu_is_omap, so let's quickly fix it up so we can finally remove plat/cpu.h for omap2lus. We want to limit cpu_is_omap macro usage to mach-omap2 only so we can make plat/cpu.h private. After this we can finally drop plat/cpu.h for omap2+. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14ARM: OMAP: Remove debug-devices.cJon Hunter1-1/+0
The OMAP2420 H4 board was the only board using the plat-omap/debug-devices.c code for configuring ethernet support. Now that OMAP2420 H4 has been migrated to use the generic gpmc code for configuring ethernet support, the debug-devices.c file is no longer used and so remove it and its header file. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-06ARM: OMAP: Remove omap_init_consistent_dma_size()Tomi Valkeinen1-1/+1
The only thing omap_init_consistent_dma_size() does is increase the consistent DMA size if CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE is defined. Increasing the consistent DMA size should no longer be needed with CMA in place. This patch removes omap_init_consistent_dma_size() and also arch/arm/mach-omap2/io.c:omap_common_init_early() which becomes an empty function. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [tony@atomide.com: updated for moved dma.h] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-31ARM: OMAP: Move omap-pm-noop.c local to mach-omap2Tony Lindgren1-1/+0
This code should be private to mach-omap2. The only use for it in for omap1 has been in dmtimer.c to check for context loss. However, omap1 does not lose context during idle, so the code is not needed. Further, omap1 timer has OMAP_TIMER_ALWON set, so omap1 was not hitting omap_pm_get_dev_context_loss_count() test. Cc: Jon Hunter <jon-hunter@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18ARM: OMAP: duplicate plat-omap/clock.c into mach-omap[12]/clock.cPaul Walmsley1-1/+1
Duplicate arch/arm/plat-omap/clock.c into arch/arm/mach-omap1/clock.c and arch/arm/mach-omap2/clock.c. This is to support people who are working on the ARM single image kernel and the OMAP common clock framework conversion. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17ARM: OMAP: Make omap_device local to mach-omap2Tony Lindgren1-1/+0
Let's make omap_device local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Make plat/mux.h omap1 onlyTony Lindgren1-1/+1
We are moving omap2+ to use the device tree based pinctrl-single.c and will be removing the old mux framework. This will remove the omap1 specific parts from plat-omap. Acked-by: Felipe Balbi <balbi@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-usb@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2Tony Lindgren1-2/+1
These can now be moved to be local headers in mach-omap2. Note that this patch removes arch/arm/plat-omap/devices.c as it will get removed anyways with Paul Walmsley's patch "ARM: OMAP: split OMAP1, OMAP2+ RNG device registration". Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-05ARM: OMAP2+: All OMAP2PLUS uses omap-device.o target so add one entryVaibhav Hiremath1-3/+1
All OMAP2PLUS based devices, builds omap-device.o target; so just add one entry so that there is no need to patch this file for any future OMAP2+ devices. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-04ARM: OMAP: Make FS USB omap1 onlyTony Lindgren1-1/+1
As the FS USB code is not being actively used for omap2+ there's no point keeping it around for omap2+. Let's make the FS USB platform init code omap1 only so we can remove the last user of omap_read/write for omap2+, and simplify things for further USB, DMA, and device tree related work. While at it, also group the mach includes for the related drivers. Cc: linux-usb@vger.kernel.org Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-13ARM: OMAP1: OCPI: move to mach-omap1/Paul Walmsley1-3/+0
Move the OMAP1 OCPI "bus" code to arch/arm/mach-omap1, since it is only used on OMAP1 devices. In the long term, it probably makes sense to move the OCPI bus code to somewhere under drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2012-03-12OMAP: mcbsp: Move core driver under sound/soc/omapPeter Ujfalusi1-2/+0
In order to consolidate the McBSP driver move it out from arch/arm/plat-omap directory under sound/soc/omap/ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-12-13ARM: OMAP: am33xx: Update common OMAP machine specific sourcesAfzal Mohammed1-1/+0
This patch updates the common machine specific source files for support for AM33XX/AM335x with cpu type, macros for identification of AM33XX/AM335X device. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> [tony@atomide.com: updated for map_io and common.h changes, dropped CK_AM33XX] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-18ARM: plat-omap: remove arch specific special handling for ioremapNicolas Pitre1-1/+1
A generic version should replace this later. As io.c has become nearly empty, omap_init_consistent_dma_size() is moved into common.c so that io.c can be removed entirely. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Kevin Hilman <khilman@ti.com>
2011-08-26omap: iommu/iovmm: move to dedicated iommu folderOhad Ben-Cohen1-2/+0
Move OMAP's iommu drivers to the dedicated iommu drivers folder. While OMAP's iovmm (virtual memory manager) driver does not strictly belong to the iommu drivers folder, move it there as well, because it's by no means OMAP-specific (in concept. technically it is still coupled with OMAP's iommu). Eventually, iovmm will be completely replaced with the generic, iommu-based, dma-mapping API. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-05-27GPIO: OMAP: move to drivers/gpioKevin Hilman1-1/+1
Move OMAP GPIO driver to drivers/gpio. Builds whenever CONFIG_ARCH_OMAP=y. Signed-off-by: Kevin Hilman <khilman@ti.com>
2010-10-08OMAP: split plat-omap/common.cPaul Walmsley1-1/+1
Split plat-omap/common.c into three pieces: 1. the 32KiHz sync timer and clocksource code, which now lives in plat-omap/counter_32k.c; 2. the OMAP2+ common code, which has been moved to mach-omap2/common.c; 3. and the remainder of the OMAP-wide common code, which includes the deprecated ATAGs code and a deprecated video RAM reservation function. The primary motivation for doing this is to move the OMAP2+-specific parts into an OMAP2+-specific file, so that build breakage related to the System Control Module code can be resolved. Benoît Cousson <b-cousson@ti.com> suggested a new filename and found some bugs in the counter_32k.c comments - thanks Benoît. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-09-23OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2Benoit Cousson1-1/+1
The current version contains only the interconnects and the mpu hwmods. The remaining hwmods will be introduced by further patches on top of this one. - enable as well omap_hwmod.c build for OMAP4 Soc Please not that this file uses the new naming convention for naming HW IPs. This convention will be backported soon for previous OMAP2 & 3 data files. new name trm name ------------- ------------------- counter_32k synctimer_32k l3_main l3 timerX gptimerX / dmtimerX mmcX mmchsX / sdmmcX dma_system sdma smartreflex_X sr_X / sr? usb_host_fs usbfshost usb_otg_hs hsusbotg usb_tll_hs usbtllhs_config wd_timerX wdtimerX ipu cortexm3 / ducati dsp c6x / tesla iva ivahd / iva2.2 kbd kbdocp / keyboard mailbox system_mailbox mpu cortexa9 / chiron Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-26OMAP4: hwmod: Enable omap_device build for OMAP4Rajendra Nayak1-0/+1
Enable omap_device layer support for OMAP4, so that drivers can use them to enable/idle/shutdown devices. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-03OMAP2/3/4 core: create omap_device layerPaul Walmsley1-0/+4
The omap_device code provides a mapping of omap_hwmod structures into the platform_device system, and includes some details on external (board-level) integration. This allows drivers to enable, idle, and shutdown on-chip device resources, including clocks, regulators, etc. The resources enabled and idled are dependent on the device's maximum wakeup latency constraint (if present). At the moment, omap_device functions are intended to be called from platform_data function pointers. Ideally in the future these functions will be called from either subarchitecture-specific platform_data activate, deactivate functions, or via an custom bus/device type for OMAP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layerPaul Walmsley1-0/+1
The interface provides device drivers, CPUFreq, and DSPBridge with a means of controlling OMAP power management parameters that are not yet supported by the Linux PM PMQoS interface. Copious documentation is in the patch in Documentation/arm/OMAP/omap_pm and the interface header file, arch/arm/plat-omap/include/mach/omap-pm.h. Thanks to Rajendra Nayak <rnayak@ti.com> for adding CORE (VDD2) OPP support and moving the OPP table initialization earlier in the event that the clock code needs them. Thanks to Tero Kristo <tero.kristo@nokia.com> for fixing the parameter check in omap_pm_set_min_bus_tput(). Jouni signed off on Tero's patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Jouni Högander <jouni.hogander@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Igor Stoppa <igor.stoppa@nokia.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Anand Sawant <sawant@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Veeramanikandan Raju <veera@ti.com> Cc: Karthik Dasu <karthik-dp@ti.com>
2009-08-28OMAP: iommu: add initial debugfs supportHiroshi DOYU1-0/+1
This enables to peek the following data. $ /debug/iommu/isp# ls mem nr_tlb_entries regs mmap pagetable tlb $ /debug/iommu/isp# head pagetable L: da: pa: ----------------------------------------- 2: 00001000 8ae4a002 2: 00002000 8e7bb002 2: 00003000 8ae49002 2: 00004000 8ae65002 ..... Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-22omap iommu: entries for Kconfig and MakefileHiroshi DOYU1-0/+1
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-04ARM: OMAP: Allow I2C bus driver to be compiled as a moduleAaro Koskinen1-1/+2
Fixes a linker error when OMAP I2C bus driver is compiled as a module: ERROR: "i2c_register_board_info" [arch/arm/plat-omap/i2c.ko] undefined! The I2C utility functions used for board initialization should be always built-in. Signed-off-by: Aaro Koskinen <Aaro.Koskinen@nokia.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-09-05[ARM] omap: allow ioremap() to use our fixed IO mappingsRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03ARM: OMAP: SRAM: Move sram-fn.S from plat-omap to mach-omap1Tony Lindgren1-1/+1
This file is omap1 specific. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: Timer32K: Move timer32k to mach-omap1Kevin Hilman1-4/+0
Move now OMAP1-specific timer32k code to mach-omap1 since OMAP2/3 32k timers are done in gptimer code. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: Timer32K: Re-organize duplicated 32k-timer codeKevin Hilman1-0/+2
On OMAP2/3, the gp-timer code can be used for a 32kHz timer simply by setting the source to be the 32k clock instead of sys_clk. This patch uses the mach-omap2/timer-gp.c code for 32kHz timer on OMAP2, moving the logic into mach-omap2/timer-gp.c, and not using plat-omap/timer32k.c which, for OMAP2, is redundant with the timer-gp code. Also, if CONFIG_OMAP_32K_TIMER is enabled, the gptimer-based clocksource is not used. Instead the default 32k sync counter is used as the clocksource (see the clocksource in plat-omap/common.c.) This is important for sleep/suspend so there is a valid counter during sleep. Note that the suspend/sleep code needs fixing to check for overflows of this counter. In addition, the OMAP2/3 details are removed from timer32k.c leaving that with only OMAP1 specifics. A follow-up patch will move it from plat-omap common code to mach-omap1. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20ARM: OMAP: Fix missing makefile optionsTony Lindgren1-0/+5
Although audio and dsp drivers are not integrated yet, allow compiling in mailbox and mcbsp to see any build warnings. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Add helper module for board specific I2C bus registrationJarkko Nikula1-0/+1
This helper module simplifies I2C bus registration for different OMAP platforms by doing registration in one place only and to allow board specific bus configuration like clock rate and number of busses configured. Helper should cover OMAP processors from first to third generation. This patch just adds the feature and current implementation cleanup and board file modifications will be done in following patches. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: abstract debug card setup (smc, leds)David Brownell1-0/+1
Additional cleanup for debug boards on H2/P2/H3/H4: move the init code that's not board-specific into a new file where it can be easily shared between all the different boards (avoiding code duplication, and making it easier to support more devices). Make H4 use that. This should be easy to drop in to the OMAP1 boards using these debug cards; the only difference seems to be that the p2 does an extra reset of the smc using the fpga (probably all boards could do that, if it's necessary) and doesn't use the gpio mux or request APIs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-05-08ARM: OMAP: Sync core code with linux-omapTony Lindgren1-1/+2
This patch syncs omap specific core code with linux-omap. Most of the changes are needed to fix bitrot caused by driver updates in linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08ARM: OMAP: h4 must have blinky leds!!David Brownell1-1/+1
This adds generic support for the "debug board" LEDs used by most of TI's OMAP reference boards, and board-specific support for the H4. It's derived from the not-as-generic stuff used by OMAP1 H2/H3/P2. Those should be able to switch easily to this version, and clean up some of the omap1-specific code. In addition to H4 support, one key improvement is supporting not just the "old" ARM debug LED API (with timer and idle LEDs, plus four that can be handy for kernel debugging), but it also supports the "new" generic LED API (most useful for usermode stuff IMO). Either or both APIs can be enabled. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2Tony Lindgren1-3/+3
Patch from Tony Lindgren Update misc OMAP core code from linux-omap tree: - McBSP updates by Samuel Ortiz, Andrzej Zaborowski - Whitespace cleanups by Ladislav Michl - Other fixes by various linux-omap developers Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3142/1: OMAP 2/5: Update files common to omap1 and omap2Tony Lindgren1-1/+1
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Serial port and framebuffer init improvments by Imre Deak - Common omap pin mux framework by Tony Lindgren - Common omap clock framework by Tony Lindren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07[ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2Tony Lindgren1-1/+3
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Clock updates by Tuukka Tikkanen, Juha Yrjola, Daniel Petrini and Tony Lindgren - DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini - Add support to dual-mode hardware timers by Lauri Leukkunen - GPIO support for 24xx by Paul Mundt - GPIO wake-up support by Tony Lindgren - Better GPIO interrupt handler to not lose interrupts by Ralph Walden and Ladislav Michl - Power Management updates by Tuukka Tikkanen - Make Power Management code use new SRAM functions by Tony Lindgren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2803/1: OMAP update 11/11: Add cpufreq supportTony Lindgren1-0/+1
Patch from Tony Lindgren This patch adds minimal cpufreq support for OMAP taking advantage of the clock framework. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omapTony Lindgren1-0/+16
Patch from Tony Lindgren This patch move common OMAP code from arch-omap to plat-omap directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 21:45:54 +0000