summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/prcm-common.h
AgeCommit message (Collapse)AuthorFilesLines
2011-12-15ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3Kyle Manna1-0/+2
Add hwmod support to enable access to UART4 of the AM35xx series of chips. The UART4 device referenced from the TRM will show up as ttyO3. This was tested on an AM3505. Signed-off-by: Kyle Manna <kyle.manna@fuel7.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-03-02Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and ↵Tony Lindgren1-0/+8
'devel-hsmmc' into omap-for-linus Conflicts: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
2011-03-01OMAP3: hwmod data: Add HSMMCPaul Walmsley1-0/+4
Update the omap3 hwmod data with the HSMMC info. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-24OMAP2420: hwmod data: Add McBSPCharulatha V1-0/+4
Add McBSP hwmod data for OMAP2420. Also add macros in prcm-common.h for idlest bit of OMAP24XX McBSP devices Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific filesPaul Walmsley1-0/+6
In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-21OMAP4: PRCM: reorganize existing OMAP4 PRCM header filesPaul Walmsley1-72/+7
Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-10OMAP2: PRCM: fix some SHIFT macros that were actually bitmasksPaul Walmsley1-5/+6
After Charu's GPIO hwmod patches, GPIO initialization on N800 emits the following messages for all GPIO banks: omap_hwmod: gpio1: cannot be enabled (3) This is due to OMAP24XX_ST_GPIOS_SHIFT being defined as a bitmask. Fix this and also fix two other macros that had the same problem. Thanks to Tony Lindgren <tony@atomide.com> for originally reporting this bug. Signed-off-by: Paul Walmsley <paul@pwsan.com Cc: Charulatha Varadarajan <charu@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regsGovindraj.R1-0/+2
To standarize among other uarts (1 to 3), we shall now: - Enable uart4 autodile bit. - Enable uart4 wakeup in PER. - Allow uart4 to wakeup the MPU. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-29OMAP2/3: UART: add omap_hwmod data for UARTs 1-4Kevin Hilman1-0/+3
This patch adds omap_hwmod data for UARTs on OMAP2 and OMAP3 platforms. UART4 support for 3630 and OMAP2 hwmod data added by Govindraj R. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-20OMAP4: PRCM: Remove duplicate definition of base addressesBenoit Cousson1-8/+0
CM1, CM2, PRM, SCRM and MPU_PRCM are already defined in omap44xx.h Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-05-20OMAP4: PRM: Remove MPU internal code name and apply PRCM naming conventionBenoit Cousson1-5/+5
The MPU subsystem was named based on internal code name (CHIRON). This patch will remove all the occurences of the chiron name are replace it with PRCM_MPU in order to differentiate the MPU local PRCM to the global one. Remove PDA_ from PRCM_MPU registers names to stick to the global PRM naming convention. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-05-20OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixesPaul Walmsley1-73/+73
Fix all of the remaining PRCM register shift/bitmask macros that did not use the _SHIFT/_MASK suffixes to use them. This makes the use of these macros consistent. It is intended to reduce error, as code can be inspected visually by reviewers to ensure that bitshifts and bitmasks are used in the appropriate places. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-26ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up.Abhijit Pagare1-0/+9
Module offsets were same for OMAP2 and OMAP3 while they differ for OMAP4. Hence we need different macros for identifying platform specific offsets. Signed-off-by: Abhijit Pagare <abhijitpagare@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
2009-12-11ARM: OMAP4: PM: Adds PRM register shift and mask bitsRajendra Nayak1-0/+6
This patch adds OMAP4 specific PRM register bit field shifts and masks. Auto generated using a python script (gen_prm_shifts_and_mask.py) developed by Benoit Cousson, Paul Walmsley and Rajendra Nayak. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11ARM: OMAP4: PM: PRM/CM module offsets for OMAP4Rajendra Nayak1-2/+65
This patch adds the offsets for new modules in PRM and CM for OMAP4 These are autogenerated using a python script (gen_prcm44xx_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-05-28OMAP2/3: PM: push core PM code from linux-omapKevin Hilman1-0/+2
This patch is to sync the core linux-omap PM code with mainline. This code has evolved and been used for a while the linux-omap tree, but the attempt here is to finally get this into mainline. Following this will be a series of patches from the 'PM branch' of the linux-omap tree to add full PM hardware support from the linux-omap tree. Much of this PM core code was written by Jouni Hogander with significant contributions from Paul Walmsley as well as many others from Nokia, Texas Instruments and linux-omap community. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-02-08[ARM] OMAP2 PRCM: clean up CM_IDLEST bitsPaul Walmsley1-65/+133
This patch fixes a few OMAP2xxx CM_IDLEST bits that were incorrectly marked as being OMAP2xxx-wide, when they were actually 2420-specific. Also, originally when the PRCM register macros were defined, bit shift macros used a "_SHIFT" suffix, and mask macros used none. This became a source of bugs and confusion, as the mask macros were mistakenly used for shift values. Gradually, the mask macros have been updated, piece by piece, to add a "_MASK" suffix on the end to clarify. This patch applies this change to the CM_IDLEST_* register bits. The patch also adds a few bits that were missing, mostly from the 3430ES1 to ES2 revisions. linux-omap source commits are d18eff5b5fa15e170794397a6a94486d1f774f77, e1f1a5cc24615fb790cc763c96d1c5cfe6296f5b, and part of 9fe6b6cf8d9e0cbb429fd64553a4b3160a9e99e1 Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-19ARM: OMAP: Powerdomain: Add OMAP3 powerdomainsPaul Walmsley1-1/+2
Add OMAP3-specific powerdomains. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.STony Lindgren1-0/+1
Split sram24xx.S into sram242x.S and sram243x.S Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP2: Add common register access for 24xx and 34xxPaul Walmsley1-0/+317
This patch adds common register access for 24xx and 34xx power and clock management in order to share code between 24xx and 34xx. Only change USB platform init code to use new register access, other access will be changed in later patches. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>