summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/pm.c
AgeCommit message (Collapse)AuthorFilesLines
2018-04-30ARM: OMAP2+: Initialize SoC PM laterTony Lindgren1-0/+19
There's no need to probe devices until at module_init time and we currently have at least PM trying to use I2C for PMICs early on. As only a part of the SoC init_early is SoC specific, we only need to call the SoC specific PM init function. And we can modify omap2_common_pm_late_init() so it becomes a late_initcall(). Note that this changes am335x to call omap2_clk_enable_autoidle_all() that seems to be missing currently. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-04-16ARM: OMAP2+: Drop unused pm-noopTony Lindgren1-9/+1
Looks like these functions don't do anything in the mainline kernel so we can just drop it. Note that we must now also remove ir-rx51 pdata as it relies on the dummy platform data that does not do anything. And ir-rx51 is calling a pdata callback that doesn't do anything without checking if it exists first. For configuring device specific minimal latencies, the interface to use is pm_qos_add_request(). For an example, see what was done in commit 9834ffd1ecc3 ("ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches"). I've added some comments to ir-rx51 so people using it can add pm_qos support and test it. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Kevin Hilman <khilman@kernel.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-14ARM: OMAP3: Fix prm wake interrupt for resumeTony Lindgren1-2/+2
For platform_suspend_ops, the finish call is too late to re-enable wake irqs and we need re-enable wake irqs on wake call instead. Otherwise noirq resume for devices has already happened. And then dev_pm_disarm_wake_irq() has already disabled the dedicated wake irqs when the interrupt triggers and the wake irq is never handled. For devices that are already in PM runtime suspended state when we enter suspend this means that a possible wake irq will never trigger. And this can lead into a situation where a device has a pending padconf wake irq, and the device will stay unresponsive to any further wake irqs. This issue can be easily reproduced by setting serial console log level to zero, letting the serial console idle, and suspend the system from an ssh terminal. Then try to wake up the system by typing to the serial console. Note that this affects only omap3 PRM interrupt as that's currently the only omap variant that does anything in omap_pm_wake(). In general, for the wake irqs to work, the interrupt must have either IRQF_NO_SUSPEND or IRQF_EARLY_RESUME set for it to trigger before dev_pm_disarm_wake_irq() disables the wake irqs. Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-16ARM: OMAP2+: pm: Remove __init from omap_pm_clkdms_setupDave Gerlach1-1/+1
omap_pm_clkdms_setup gets called from pm init functions and now that pm33xx and pm43xx can be loaded as modules this must be kept to be called at any point during runtime. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-06ARM: OMAP: PM: Drop useless checks for PM_SUSPEND_STANDBYGeert Uytterhoeven1-1/+0
As OMAP uses the standard suspend_valid_only_mem() for its platform_suspend_ops.valid() callback, its platform_suspend_ops.enter() callback will never be called with state equal to PM_SUSPEND_STANDBY. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-30PM / OPP: Update OPP users to put referenceViresh Kumar1-3/+2
This patch updates dev_pm_opp_find_freq_*() routines to get a reference to the OPPs returned by them. Also updates the users of dev_pm_opp_find_freq_*() routines to call dev_pm_opp_put() after they are done using the OPPs. As it is guaranteed the that OPPs wouldn't get freed while being used, the RCU read side locking present with the users isn't required anymore. Drop it as well. This patch also updates all users of devfreq_recommended_opp() which was returning an OPP received from the OPP core. Note that some of the OPP core routines have gained rcu_read_{lock|unlock}() calls, as those still use RCU specific APIs within them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> [Devfreq] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-10ARM: OMAP2+: Remove legacy PM initTony Lindgren1-60/+6
This is no longer needed when booted with device tree. And let's replace cpu_is with soc_is for the PM code to avoid confusion, they do the same thing. Note that omap_pmic_late_init() now just calls omap3_twl_init() and omap4_twl_init() to initialize the voltage layer so we can remove the remaining references to twl-common code and remove it in the following patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-07-04ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIsTero Kristo1-7/+1
The previous implementation was racy in many locations, where the current status of the clockdomain was read out, some operations were executed, and the previous status info was used afterwards to decide next state for the clockdomain. Instead, fix the implementation of the allow_idle / deny_idle APIs to properly have usecounting support. This allows clean handling internally within the clockdomain core, and simplifies the usage also within hwmod. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-25cpufreq: omap: Use generic platdev driverViresh Kumar1-5/+2
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-03cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'Viresh Kumar1-1/+1
The naming convention of this driver was always under the scanner, people complained that it should have a more generic name than cpu0, as it manages all CPUs that are sharing clock lines. Also, in future it will be modified to support any number of clusters with separate clock/voltage lines. Lets rename it to 'cpufreq_dt' from 'cpufreq_cpu0'. Tested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-26Merge tag 'omap-for-v3.16/pm-signed' of ↵Olof Johansson1-16/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Merge "ARM: omap pm changes for v3.16 merge window, resend" from Tony Lindgren: PM related fixes for omap3 that were discovered during omap3 conversion to device tree. This series sets up the PMIC signaling in a way where we can test for PM regressions easily by looking at state of the the sys_clkreq and sys_off_mode pins. Note that this series alone does not make omap3 PM to cut off core voltage during off-idle, changes to twl4030-power.c configurations are still needed. Those will be posted separately. * tag 'omap-for-v3.16/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig ARM: dts: Enable N900 keyboard sleep leds by default ARM: OMAP2+: Fix voltage scaling init for device tree ARM: dts: Configure omap3 twl4030 I2C4 pins by default ARM: OMAP3: Fix voltage control for deeper idle states ARM: OMAP3: Disable broken omap3_set_off_timings function ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode ARM: dts: Fix omap serial wake-up when booted with device tree mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-19ARM: OMAP2+: Remove suspend_set_ops from common pm late initDave Gerlach1-5/+12
In omap2_common_pm_late_init suspend_set_ops was called to set common suspend handling functions for all omap platforms. This created two problems. First, these suspend ops were being set for all platforms, regardless of whether or not suspend support has been integrated so in the case of AM33XX, suspend to mem was presented as available but failed every time. Second, some platforms will need to define a completely separate set of suspend ops, such as AM33XX, due to differences from previous omap platforms so there is no need to always set the common omap ops. This patch moves the suspend_set_ops call from omap2_common_pm_late_init into a separate function that then gets called in the omap*_pm_init functions for each platform. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: OMAP2+: Fix voltage scaling init for device treeTony Lindgren1-16/+12
We are currently disabling the init of voltage scaling for device tree. With the voltage scaling problems fixed for omap3 in general, there's no need to disable the voltage scaling init for device tree based booting. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-14Merge tag 'pm+acpi-3.13-rc1' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael J Wysocki: - New power capping framework and the the Intel Running Average Power Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan. - Addition of the in-kernel switching feature to the arm_big_little cpufreq driver from Viresh Kumar and Nicolas Pitre. - cpufreq support for iMac G5 from Aaro Koskinen. - Baytrail processors support for intel_pstate from Dirk Brandewie. - cpufreq support for Midway/ECX-2000 from Mark Langsdorf. - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha. - ACPI power management support for the I2C and SPI bus types from Mika Westerberg and Lv Zheng. - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat, Stratos Karafotis, Xiaoguang Chen, Lan Tianyu. - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev. - intel_pstate updates from Dirk Brandewie and Adrian Huang. - ACPICA update to version 20130927 includig fixes and cleanups and some reduction of divergences between the ACPICA code in the kernel and ACPICA upstream in order to improve the automatic ACPICA patch generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh Bhat, Bjorn Helgaas, David E Box. - ACPI IPMI driver fixes and cleanups from Lv Zheng. - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang Yanfei, Rafael J Wysocki. - Conversion of the ACPI AC driver to the platform bus type and multiple driver fixes and cleanups related to ACPI from Zhang Rui. - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu, Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki. - Fixes and cleanups and new blacklist entries related to the ACPI video support from Aaron Lu, Felipe Contreras, Lennart Poettering, Kirill Tkhai. - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi. - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han, Bartlomiej Zolnierkiewicz, Prarit Bhargava. - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe. - Operation Performance Points (OPP) core updates from Nishanth Menon. - Runtime power management core fix from Rafael J Wysocki and update from Ulf Hansson. - Hibernation fixes from Aaron Lu and Rafael J Wysocki. - Device suspend/resume lockup detection mechanism from Benoit Goby. - Removal of unused proc directories created for various ACPI drivers from Lan Tianyu. - ACPI LPSS driver fix and new device IDs for the ACPI platform scan handler from Heikki Krogerus and Jarkko Nikula. - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa. - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter, Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause, Liu Chuansheng. - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding, Jean-Christophe Plagniol-Villard. * tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits) cpufreq: conservative: fix requested_freq reduction issue ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines PM / runtime: Use pm_runtime_put_sync() in __device_release_driver() ACPI / event: remove unneeded NULL pointer check Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1" ACPI / video: Quirk initial backlight level 0 ACPI / video: Fix initial level validity test intel_pstate: skip the driver if ACPI has power mgmt option PM / hibernate: Avoid overflow in hibernate_preallocate_memory() ACPI / hotplug: Do not execute "insert in progress" _OST ACPI / hotplug: Carry out PCI root eject directly ACPI / hotplug: Merge device hot-removal routines ACPI / hotplug: Make acpi_bus_hot_remove_device() internal ACPI / hotplug: Simplify device ejection routines ACPI / hotplug: Fix handle_root_bridge_removal() ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug ACPI / scan: Start matching drivers after trying scan handlers ACPI: Remove acpi_pci_slot_init() headers from internal.h ACPI / blacklist: fix name of ThinkPad Edge E530 PowerCap: Fix build error with option -Werror=format-security ... Conflicts: arch/arm/mach-omap2/opp.c drivers/Kconfig drivers/spi/spi.c
2013-10-25PM / OPP: rename header to linux/pm_opp.hNishanth Menon1-1/+1
Since Operating Performance Points (OPP) functions are specific to device specific power management, be specific and rename opp.h to pm_opp.h Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25PM / OPP: rename data structures to dev_pm equivalentsNishanth Menon1-1/+1
Since Operating Performance Points (OPP) data structures are specific to device specific power management, be specific and rename opp_* data structures in OPP library with dev_pm_opp_* equivalent. Affected structures are: struct opp enum opp_event Minor checkpatch warning resulting of this change was fixed as well. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25PM / OPP: rename functions to dev_pm_opp*Nishanth Menon1-2/+2
Since Operating Performance Points (OPP) functions are specific to device specific power management, be specific and rename opp_* accessors in OPP library with dev_pm_opp_* equivalent. Affected functions are: opp_get_voltage opp_get_freq opp_get_opp_count opp_find_freq_exact opp_find_freq_floor opp_find_freq_ceil opp_add opp_enable opp_disable opp_get_notifier opp_init_cpufreq_table opp_free_cpufreq_table Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-22ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported bootNishanth Menon1-3/+9
With OMAP3+ and AM33xx supported SoC having defined CPU device tree entries with operating-points and clock nodes defined, we can now use the SoC generic cpufreq-cpu0 driver by registering appropriate device. Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-30Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
2013-04-10cpufreq: OMAP: instantiate omap-cpufreq as a platform_driverNishanth Menon1-0/+9
As multi-platform build is being adopted by more and more ARM platforms, initcall function should be used very carefully. For example, when CONFIG_ARM_OMAP2PLUS_CPUFREQ is built in the kernel, omap_cpufreq_init() will be called on all the platforms to initialize omap-cpufreq driver. Further, on OMAP, we now use Soc generic cpufreq-cpu0 driver using device tree entries. To allow cpufreq-cpu0 and omap-cpufreq drivers to co-exist for OMAP in a single image, we need to ensure the following: 1. With device tree boot, we use cpufreq-cpu0 2. With non device tree boot, we use omap-cpufreq In the case of (1), we will have cpu OPPs and regulator registered as part of the device tree nodes, to ensure that omap-cpufreq and cpufreq-cpu0 don't conflict in managing the frequency of the same CPU, we should not permit omap-cpufreq to be probed. In the case of (2), we will not have the cpufreq-cpu0 device, hence only omap-cpufreq will be active. To eliminate this undesired these effects, we change omap-cpufreq driver to have it instantiated as a platform_driver and register "omap-cpufreq" device only when booted without device tree nodes on OMAP platforms. This allows the following: a) Will only run on platforms that create the platform_device "omap-cpufreq". b) Since the platform_device is registered only when device tree nodes are *not* populated, omap-cpufreq driver does not conflict with the usage of cpufreq-cpu0 driver which is used on OMAP platforms when device tree nodes are present. Inspired by commit 5553f9e26f6f49a93ba732fd222eac6973a4cf35 (cpufreq: instantiate cpufreq-cpu0 as a platform_driver) [robherring2@gmail.com: reported conflict of omap-cpufreq vs other driver in an non-device tree supported boot] Reported-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08arm: Use generic idle loopThomas Gleixner1-3/+2
Use the generic idle loop and replace enable/disable_hlt with the respective core functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP Link: http://lkml.kernel.org/r/20130321215233.826238797@linutronix.de
2013-02-28Merge tag 'late-omap' of ↵Linus Torvalds1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late OMAP changes from Olof Johansson: "This branch contains changes for OMAP that came in late during the release staging, close to when the merge window opened. It contains, among other things: - OMAP PM fixes and some patches for audio device integration - OMAP clock fixes related to common clock conversion - A set of patches cleaning up WFI entry and blocking. - A set of fixes and IP block support for PM on TI AM33xx SoCs (Beaglebone, etc) - A set of smaller fixes and cleanups around AM33xx restart and revision detection, as well as removal of some dead code (CONFIG_32K_TIMER_HZ)" * tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: omap2: include linux/errno.h in hwmod_reset ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default ARM: OMAP4: hwmod data: Enable AESS hwmod device ARM: OMAP4: hwmod data: Update AESS data with memory bank area ARM: OMAP4+: AESS: enable internal auto-gating during initial setup ASoC: TI AESS: add autogating-enable function, callable from architecture code ARM: OMAP2+: hwmod: add enable_preprogram hook ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init() ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3 ARM: OMAP2+: AM33XX: Update the hardreset API ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files ...
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-66/+3
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-12Merge tag 'omap-for-v3.9/pm-omap4-signed' of ↵Olof Johansson1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap From Tony Lindgren: omap4 pm changes via Paul Walmsley <paul@pwsan.com>: Some OMAP4 power management fixes and audio device integration patches. This pull request contains a fix for an issue discovered during branch integration. Basic test logs are available at: http://www.pwsan.com/omap/testlogs/omap4_prcm_devel_a_3.9/20130210112717/ * tag 'omap-for-v3.9/pm-omap4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: hwmod data: Enable AESS hwmod device ARM: OMAP4: hwmod data: Update AESS data with memory bank area ARM: OMAP4+: AESS: enable internal auto-gating during initial setup ASoC: TI AESS: add autogating-enable function, callable from architecture code ARM: OMAP2+: hwmod: add enable_preprogram hook ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init() ARM: OMAP4: PM: Warn users about usage of older bootloaders
2013-02-08ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()Santosh Shilimkar1-10/+10
Commit 1416408d {ARM: OMAP2+: PM: share some suspend-related functions across OMAP2, 3, 4} moved suspend code to common place but now with that change, for DT build on OMAP4, suspend hooks are not getting registered which results in no suspend support. The DT return condition is limited to PMIC and smartreflex initialization and hence restrict it so that suspend ops gets registered. Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-30Merge tag 'omap-cleanup-b-for-3.9' of ↵Tony Lindgren1-63/+2
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.9/pm Several OMAP2+ power management fixes, optimizations, and cleanup. This series is a prerequisite for the functional powerdomain conversion series. Basic test logs for this branch are here: http://www.pwsan.com/omap/testlogs/pm_cleanup_fixes_3.9/20130129150017/
2013-01-29ARM: OMAP2+: clockdomain: convert existing atomic usecounts into ↵Paul Walmsley1-1/+2
spinlock-protected shorts/ints The atomic usecounts seem to be confusing, and are no longer needed since the operations that they are attached to really should take place under lock. Replace the atomic counters with simple integers, protected by the enclosing powerdomain spinlock. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-29ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain codePaul Walmsley1-61/+0
Move omap_set_pwrdm_state() from the PM code to the powerdomain code, and refactor it to split it up into several functions. A subsequent patch will rename it to conform with the existing powerdomain function names. This version includes some additional documentation, based on a suggestion from Jean Pihet. It also modifies omap_set_pwrdm_state() to not bail out early unless both the powerdomain current power state and the next power state are equal. (Previously it would terminate early if the next power state was equal to the target power state, which was insufficiently rigorous.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tero Kristo <t-kristo@ti.com>
2013-01-29ARM: OMAP2: PM/powerdomain: drop unnecessary pwrdm_wait_transition()Paul Walmsley1-1/+0
Drop an unnecessary pwrdm_wait_transition() from mach-omap2/pm.c - it's called by the subsequent pwrdm_state_switch(). Also get rid of pwrdm_wait_transition() in the powerdomain code - there's no longer any need to export this function. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-26ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device codePaul Walmsley1-3/+1
Remove now-obsolete code from arch/arm/mach-omap2/omap_device.c. This mostly consists of removing the first attempt at device PM latency handling. This was never really used, has been replaced by the common dev_pm_qos code, and needs to go away as part of the DT conversion. Also, the early platform_device creation code has been removed, as it appears to be unused. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-11ARM: OMAP2+: Use omap initcallsTony Lindgren1-1/+1
This way the initcalls don't run on other SoCs on multiplatform kernels. Otherwise we'll get something like this when booting on vexpress: omap_hwmod: _ensure_mpu_hwmod_is_setup: MPU initiator hwmod mpu not yet registered ... WARNING: at arch/arm/mach-omap2/pm.c:82 _init_omap_device+0x74/0x94() _init_omap_device: could not find omap_hwmod for mpu ... omap-dma-engine omap-dma-engine: OMAP DMA engine driver ... Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-12ARM: arm-soc: Merge branch 'next/clk' into next/pmOlof Johansson1-2/+3
Merge together a couple of the smaller pm/clock branches into one. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-14ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=nKevin Hilman1-0/+2
commit 908b75e8 (ARM: OMAP: add support for oscillator setup) added a new API for oscillator setup, but is broken when CONFIG_PM=n. The new functions have dummy definitions when CONFIG_PM=n, but also have full implementations available, which conflict. To fix, wrap the PM implmentations in #ifdef CONFIG_PM. Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-13Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clockTony Lindgren1-0/+30
2012-11-05ARM: OMAP: add support for oscillator setupTero Kristo1-0/+30
This contains startup and shutdown times for the oscillator. By default use ULONG_MAX. Oscillator setup is used for calculating and setting up latencies for sleep modes that disable oscillator. Based on a patch from Nishanth Menon <nm@ti.com>. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-18ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2Tony Lindgren1-0/+1
We want to remove plat/cpu.h. To do this, let's first split it to private soc.h to mach-omap1 and mach-omap2. We have to keep plat/cpu.h around until the remaining drivers are fixed, so let's include the local soc.h in plat/cpu.h and for drivers still including plat/cpu.h. Once the drivers are fixed not to include plat/cpu.h, we can remove the file. This is needed for the ARM common zImage support. [tony@atomide.com: updated to not print a warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18ARM: OMAP: Make plat/omap-pm.h local to mach-omap2Tony Lindgren1-1/+1
We must move this for ARM common zImage support. Note that neither drivers/media/rc/ir-rx51.c or drivers/media/platform/omap3isp/ispvideo.c need to include omap-pm.h, so this patch removes the include for those files. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi> Cc: linux-media@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17ARM: OMAP: Make omap_device local to mach-omap2Tony Lindgren1-1/+1
Let's make omap_device local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-09Merge tag 'omap-for-v3.7-rc1/fixes-cpufreq-signed' of ↵Olof Johansson1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: These were agreed to be merged via arm soc tree as Rafael is on vacation. From Kevin Hilman <khilman@deeprootsystems.com>: This series a couple bug fixes and a couple fixes that make this driver support recently added OMAP-based SoCs. The 'get_cpu_device' patch is needed due to a change in the OMAP OMAP PM core code which enforces use of get_cpu_device() instead of a deprecated OMAP-specific API. The usage of plat/*.h headers breaks single zImage, so platforms are cleaning up and/or removing plat/*.h so the driver needs to be fixed accordingly. This series is based on the merge of Rafael's pm-for-3.7-rc1 tag into Linus' master branch: commit 16642a2e7be23bbda013fc32d8f6c68982eab603. * tag 'omap-for-v3.7-rc1/fixes-cpufreq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: PM: MPU DVFS: use generic CPU device for MPU-SS cpufreq: OMAP: use get_cpu_device() instead of omap_device API cpufreq: OMAP: fix clock usage to be SoC independent, remove plat/ includes cpufreq: OMAP: remove unused <plat/omap-pm.h> cpufreq: OMAP: ensure valid clock rate before scaling
2012-10-08Merge tag 'for_3.7-fixes-pm' of ↵Tony Lindgren1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-v3.7-rc1/fixes-pm OMAP PM related fixes for v3.7-rc
2012-10-08Merge tag 'for_3.7-fixes-cpufreq' of ↵Tony Lindgren1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-v3.7-rc1/fixes-cpufreq This series a couple bug fixes and a couple fixes that make this driver support recently added OMAP-based SoCs. The 'get_cpu_device' patch is needed due to a change in the OMAP OMAP PM core code which enforces use of get_cpu_device() instead of a deprecated OMAP-specific API. The usage of plat/*.h headers breaks single zImage, so platforms are cleaning up and/or removing plat/*.h so the driver needs to be fixed accordingly. This series is based on the merge of Rafael's pm-for-3.7-rc1 tag into Linus' master branch: commit 16642a2e7be23bbda013fc32d8f6c68982eab603.
2012-10-08ARM: OMAP2+: PM: MPU DVFS: use generic CPU device for MPU-SSKevin Hilman1-1/+10
Currently, a dummy omap_device is created for the MPU sub-system so that a device node exists for MPU DVFS. Specifically, for the association of MPU OPPs to a device node, and so that a voltage regulator can be mapped to a device node. For drivers to get a handle to this device node, an OMAP-specific API has been used. However, the kernel already has device nodes for the CPU(s) in the system, so we can use those instead of an OMAP-specific dummy device and then drivers (like OMAP CPUfreq) can use generic APIs. To use the existing CPU device nodes, modify the OPP creation and regulator registration to use the CPU0 device node for registraion. NOTE: this patch always uses CPU0 as the device node. On all OMAPs today, MPU DVFS scales all CPUs together, so this will not be a problem, but this assumption will need to be changed if independently scalable CPUs are introduced. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-02ARM: OMAP2+: PM: fix return value check in omap2_set_init_voltage()Wei Yongjun1-1/+1
In case of error, the function voltdm_lookup() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-09-23ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problemsPaul Walmsley1-1/+2
The idle status of the IP blocks and clocks inside the EMU clockdomain isn't taken into account by the PRCM hardware when deciding whether the clockdomain is idle. Add a workaround flag in the clockdomain code, CLKDM_MISSING_IDLE_REPORTING, to deal with this problem, and add the code necessary to support it. If CLKDM_MISSING_IDLE_REPORTING is set on a clockdomain, the clockdomain will be forced active whenever an IP block inside that clockdomain is in use, even if the clockdomain supports hardware-supervised idle. When the kernel indicates that the last active IP block inside the clockdomain is no longer used, the clockdomain will be forced idle, or, if that mode is not supported in the hardware, it will be placed into hardware-supervised idle. This patch is an equal collaboration with Jon Hunter <jon-hunter@ti.com>. Ming Lei <ming.lei@canonical.com>, Will Deacon <will.deacon@arm.com>, Madhav Vij <mvij@ti.com>, Kevin Hilman <khilman@ti.com>, Benoît Cousson <b-cousson@ti.com>, and Santosh Shilimkar <santosh.shilimkar@ti.com> all made essential contributions to the understanding of EMU clockdomain power management on OMAP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Madhav Vij <mvij@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Jon Hunter <jon-hunter@ti.com>
2012-09-23Merge branch 'clock_devel_3.7' into hwmod_prcm_clock_a_3.7Paul Walmsley1-1/+1
Conflicts: arch/arm/mach-omap2/clkt34xx_dpll3m2.c arch/arm/mach-omap2/clkt_clksel.c arch/arm/mach-omap2/clock.c
2012-09-22ARM: OMAP2+: clock: Remove all direct dereferencing of struct clkRajendra Nayak1-1/+1
While we move to Common Clk Framework (CCF), direct deferencing of struct clk wouldn't be possible anymore. Hence get rid of all such instances in the current clock code and use macros/helpers similar to the ones that are provided by CCF. While here also concatenate some strings split across multiple lines which seem to be needed anyway. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: simplified some compound expressions; reformatted some messages] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Mike Turquette <mturquette@linaro.org>
2012-09-12ARM: OMAP: unwrap stringsPaul Walmsley1-2/+2
Find and unwrap wrapped strings in the style: pr_debug("clockdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", clkdm1->name, clkdm2->name); Keeping these strings contiguous seems to be the current Linux kernel policy. The offending lines were found with the following command: pcregrep -rnM '"\s*$\s*"' arch/arm/*omap* While here, some messages have been clarified, some pr_warning( ... calls have been converted to pr_warn( ..., and some printk(KERN_* ... have been converted to pr_*. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-08ARM: omap2: use machine specific hook for late initShawn Guo1-2/+1
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
2012-03-29ARM: OMAP: pm: fix compilation breakGovindraj.R1-0/+2
Fix the compilation break observed on latest mainline caused by 9f97da78 (Disintegrate asm/system.h for ARM): arch/arm/mach-omap1/pm.c: In function 'omap_pm_prepare': arch/arm/mach-omap1/pm.c:587: error: implicit declaration of function 'disable_hlt' arch/arm/mach-omap1/pm.c: In function 'omap_pm_finish': arch/arm/mach-omap1/pm.c:624: error: implicit declaration of function 'enable_hlt' arch/arm/mach-omap1/pm.c: In function 'omap_pm_init': arch/arm/mach-omap1/pm.c:681: error: 'arm_pm_idle' undeclared (first use in this function) ... arch/arm/mach-omap2/pm.c: In function 'omap_pm_begin': arch/arm/mach-omap2/pm.c:239: error: implicit declaration of function 'disable_hlt' arch/arm/mach-omap2/pm.c: In function 'omap_pm_end': arch/arm/mach-omap2/pm.c:247: error: implicit declaration of function 'enable_hlt' Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> [tony@atomide.com: updated to fix omap1 too] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+8
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...