summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mxs/clock-mx23.c
AgeCommit message (Collapse)AuthorFilesLines
2011-12-28ARM: mxs: convert platform code to clk_prepare/clk_unprepareShawn Guo1-5/+5
The patch converts mxs platform code to clk_prepare/clk_unprepare by using helper functions clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-05-19mx23: register clocks for mmcPeter Korsgaard1-0/+2
Commit 47babe69 (mxs: dynamically allocate mmc device) added the ssp setup and mmc clocks for mx23/28, but forgot to register the mmc clocks on mx23. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-25ARM: mxs: dynamically allocate mmc deviceShawn Guo1-0/+15
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> [ukleinek: fix naming to include complete device name in functions] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxs: add dma deviceShawn Guo1-1/+2
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX23/28: Add framebuffer device supportSascha Hauer1-0/+1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com>
2011-03-01ARM: mxs: Add pwm clocks and device registrationSascha Hauer1-1/+5
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-02-17ARM: mx23: dynamically allocate mx23 auart deviceShawn Guo1-0/+1
i.MX23 Reference Manaul starts auart index from 1 than 0. Changing the index to start from 0 requires corresponding changes on base address, irq, and iomux definitions, and will probably confuse people who reads codes and hardware documents together. This patch introduced the field 'hwid' to distinguish the driver id and controller id. These two ids are different on mx23 while identical on mx28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mxs: fix clock base address missingShawn Guo1-1/+1
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-24ARM i.MX23: use correct register for setting the rateSascha Hauer1-1/+1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com>
2011-01-14ARM mxs: clkdev related compile fixesSascha Hauer1-0/+1
Since commit 6d803ba (ARM: 6483/1: arm & sh: factorised duplicated clkdev.c) platforms need to select CLKDEV_LOOKUP instead of COMMON_CLKDEV and need to include <linux/clkdev.h>. Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12ARM: mxs: Change duart device to use amba-pl011Shawn Guo1-2/+10
The mxs duart is actually an amba-pl011 device. This commit changes the duart device code to dynamically allocate amba-pl011 device, so that drivers/serial/amba-pl011.c can be used on mxs. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-20ARM: mxs: Add clock supportShawn Guo1-0/+526
Add clock for MXS-based SoCs, MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>