summaryrefslogtreecommitdiff
path: root/arch/arm/mach-kirkwood/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2010-09-19[ARM] Kirkwood: remove duplicated code in LaCie setup filesSimon Guinot1-6/+6
Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19[ARM] Kirkwood: add LaCie d2 Network v2 supportSimon Guinot1-0/+1
Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19[ARM] Kirkwood: support for Seagate DockStarEric Cooper1-0/+1
This patch adds support for the Seagate FreeAgent DockStar, a Marvell SheevaPlug variant. Signed-off-by: Eric Cooper <ecc@cmu.edu> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-16[ARM] Kirkwood: add LaCie Network Space Max v2 supportSimon Guinot1-0/+1
Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-16[ARM] Kirkwood: Add support for HP t5325 Thin ClientMartin Michlmayr1-0/+1
Add support for the HP t5325 Thin Client. This thin client is based on a Marvell Kirkwood chip at 1.2 GHz and features 512 MB RAM, 512 MB SATA-attached flash and an XGI Volari Z11 GPU. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-05-03[ARM] Kirkwood: merge net2big_v2 and net5big_v2 board setupsSimon Guinot1-2/+2
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-05-03[ARM] Kirkwood: add LaCie 5Big Network v2 supportSimon Guinot1-0/+1
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-05-03[ARM] Kirkwood: add LaCie 2Big Network v2 supportSimon Guinot1-0/+1
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-05-03[ARM] Kirkwood: Marvell GuruPlug supportSiddarth Gore1-0/+1
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <gores@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-25Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King1-0/+1
2010-02-23[ARM] eSATA SheevaPlug basic board supportJohn Holland1-0/+1
Allow basic eSATA SheevaPlug board configuration and build. Signed-off-by: John Holland <john.holland@cellent-fs.de> Signed-off-by: Nicolas Pitre <nico@marvell.com> --
2010-02-09[ARM] Kirkwood: add LaCie Internet Space v2 supportSimon Guinot1-0/+1
The Internet and Network Space v2 boards are very close. The only difference is that there is no USB type B plug wired on the Internet Space v2. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-05[ARM] kirkwood: combine support for openrd base/client supportAlexander Clouter1-1/+1
Inspired by the mach-ep93xx flattening work, there is really not much difference between the OpenRD base and client board support so they should be merged together. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2009-12-10[ARM] Kirkwood: Add LaCie Network Space v2 supportSimon Guinot1-0/+1
Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13[ARM] Kirkwood: Remove code duplication in QNAP setup filesMartin Michlmayr1-2/+2
Remove the code duplication found in the setup files of TS-219 and TS-41x. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13[ARM] Kirkwood: Add support for QNAP TS-41x Turbo NASMartin Michlmayr1-0/+1
Add support for the QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-10[ARM] Kirkwood: Marvell OpenRD-Base board supportDhaval Vasa1-0/+1
reference: http://open-rd.org http://code.google.com/p/openrd This patch is tested for: 1. Boot from DRAM/NAND flash 2. NAND read/write/erase 3. GbE0 4. USB read/write FIXME: 1. SD/UART1 selection 2. MPP configuration (currently, default) 3. PEX Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08[ARM] Kirkwood: add Marvell 88F6281 GTW GE board supportLennert Buytenhek1-0/+1
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2009-06-08[ARM] Kirkwood: CPU idle driverRabeeh Khoury1-0/+2
The patch adds support for Kirkwood cpu idle. Two idle states are defined: 1. Wait-for-interrupt (replacing default kirkwood wfi) 2. Wait-for-interrupt and DDR self refresh Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23[ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NASMartin Michlmayr1-0/+1
Add support for the QNAP TS-119 and TS-219 Turbo NAS devices. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-15[ARM] Kirkwood: Marvell SheevaPlug supportShadi Ammouri1-0/+1
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-19[ARM] Kirkwood: MPP initialization codeNicolas Pitre1-1/+1
This allows for board support code to set up their MPP config if the bootloader didn't do it all or did it wrong. This also allows to register usable GPIOs. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-10-23[ARM] 5321/1: Kirkwood: fix typo in MakefileNicolas Pitre1-1/+1
Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-22[ARM] add Marvell Kirkwood (88F6000) SoC supportSaeed Bishara1-0/+5
The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface, a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS interface, and IDMA/XOR engines, and depending on the model, also features one or two Gigabit Ethernet interfaces, two SATA II interfaces, one or two TWSI interfaces, one or two UARTs, a TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and an SDIO interface. This patch adds supports for the Marvell DB-88F6281-BP Development Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs, enabling support for the PCIe interface, the USB interface, the ethernet interfaces, the SATA interfaces, the TWSI interfaces, the UARTs, and the NAND controller. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-02 17:33:54 +0000