summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2016-12-20ARM: dts: hix5hd2: don't change the existing compatible stringDongpo Li1-2/+2
The SoC hix5hd2 compatible string has the suffix "-gmac" and we should not change it. We should only add the generic compatible string "hisi-gmac-v1". Fixes: 0855950ba580 ("ARM: dts: hix5hd2: add gmac generic compatible and clock names") Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-15Merge tag 'armsoc-dt' of ↵Linus Torvalds387-7965/+18082
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "Lots of changes as usual, so I'm trying to be brief here. Most of the new hardware support has the respective driver changes merged through other trees or has had it available for a while, so this is where things come together. We get a DT descriptions for a couple of new SoCs, all of them variants of other chips we already support, and usually coming with a new evaluation board: - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices - Qualcomm MDM9615 LTE baseband - NXP imx6ull, the latest and smallest i.MX6 application processor variant - Renesas RZ/G (r8a7743 and r8a7745) application processors - Rockchip PX3, a variant of the rk3188 chip used in Android tablets - Rockchip rk1108 single-core application processor - ST stm32f746 Cortex-M7 based microcontroller - TI DRA71x automotive processors These are commercially available consumer platforms we now support: - Motorola Droid 4 (xt894) mobile phone - Rikomagic MK808 Android TV stick based on Rockchips rx3066 - Cloud Engines PogoPlug v3 based on OX820 - Various Broadcom based wireless devices: - Netgear R8500 router - Tenda AC9 router - TP-LINK Archer C9 V1 - Luxul XAP-1510 Access point - Turris Omnia open hardware router based on Armada 385 And a couple of new boards targeted at developers, makers or industrial integration: - Macnica Sodia development platform for Altera socfpga (Cyclone V) - MicroZed board based on Xilinx Zynq FPGA platforms - TOPEET itop/elite based on exynos4412 - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615 - NextThing CHIP Pro gadget - NanoPi M1 development board - AM571x-IDK industrial board based on TI AM5718 - i.MX6SX UDOO Neo - Boundary Devices Nitrogen6_SOM2 (i.MX6) - Engicam i.CoreM6 - Grinn i.MX6UL liteSOM/liteBoard - Toradex Colibri iMX6 module Other changes: - added peripherals on renesas, davinci, stm32f429, uniphier, sti, mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm, mvebu, allwinner, broadcom, exynos, zynq - Continued fixes for W=1 dtc warnings - The old STiH415/416 SoC support gets removed, these never made it into products and have served their purpose in the kernel as a template for teh newer chips from ST - The exynos4415 dtsi file is removed as nothing uses it. - Intel PXA25x can now be booted using devicetree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits) arm: dts: zynq: Add MicroZed board support ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf ARM: dts: da850: enable memctrl and mstpri nodes per board ARM: dts: da850-lcdk: Add ethernet0 alias to DT ARM: dts: artpec: add pcie support ARM: dts: add support for Turris Omnia devicetree: Add vendor prefix for CZ.NIC ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node ARM: dts: berlin2q-marvell-dmp: fix regulators' name ARM: dts: Add xo to sdhc clock node on qcom platforms ARM: dts: r8a7794: Add device node for PRR ARM: dts: r8a7793: Add device node for PRR ARM: dts: r8a7792: Add device node for PRR ARM: dts: r8a7791: Add device node for PRR ARM: dts: r8a7790: Add device node for PRR ARM: dts: r8a7779: Add device node for PRR ARM: dts: r8a73a4: Add device node for PRR ARM: dts: sk-rzg1e: add Ether support ARM: dts: sk-rzg1e: initial device tree ...
2016-12-15Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds4-12/+25
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Arnd Bergmann: "As usual, we queue up a few fixes that don't seem urgent enough to go in through -rc, or that just came a little too late given their size. The zx fixes make the platform finally boot on real hardware, the davinci and imx31 get the DT support working better for some of the machines that are still normally used with classic board files. One tegra fix is important for new bootloader versions, but the bug has been around for a while without anyone noticing. The other changes are mostly cosmetic" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) arm64: tegra: Add missing Smaug revision arm64: tegra: Add VDD_GPU regulator to Jetson TX1 arm64: dts: zte: clean up gic-v3 redistributor properties arm64: dts: zx: Fix gic GICR property bus: vexpress-config: fix device reference leak soc: ti: qmss: fix the case when !SMP ARM: lpc32xx: drop duplicate header device.h ARM: ixp4xx: drop duplicate header gpio.h ARM: socfpga: fix spelling mistake in error message ARM: dts: imx6q-cm-fx6: fix fec pinctrl ARM: dts: imx7d-pinfunc: fix UART pinmux defines ARM: dts: imx6qp: correct LDB clock inputs ARM: OMAP2+: pm-debug: Use seq_putc() in two functions ARM: OMAP2+: Remove the omapdss_early_init_of() function mfd: tps65217: Fix mismatched interrupt number ARM: zx: Fix error handling ARM: spear: Fix error handling ARM: davinci: da850: Fix pwm name matching ARM: clk: imx31: properly init clocks for machines with DT clk: imx31: fix rewritten input argument of mx31_clocks_init() ...
2016-12-14Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-0/+2
Pull dmaengine updates from Vinod Koul: "Fairly routine update this time around with all changes specific to drivers: - New driver for STMicroelectronics FDMA - Memory-to-memory transfers on dw dmac - Support for slave maps on pl08x devices - Bunch of driver fixes to use dma_pool_zalloc - Bunch of compile and warning fixes spread across drivers" [ The ST FDMA driver already came in earlier through the remoteproc tree ] * tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: sirf-dma: remove unused ‘sdesc’ dmaengine: pl330: remove unused ‘regs’ dmaengine: s3c24xx: remove unused ‘cdata’ dmaengine: stm32-dma: remove unused ‘src_addr’ dmaengine: stm32-dma: remove unused ‘dst_addr’ dmaengine: stm32-dma: remove unused ‘sfcr’ dmaengine: pch_dma: remove unused ‘cookie’ dmaengine: mic_x100_dma: remove unused ‘data’ dmaengine: img-mdc: remove unused ‘prev_phys’ dmaengine: usb-dmac: remove unused ‘uchan’ dmaengine: ioat: remove unused ‘res’ dmaengine: ioat: remove unused ‘ioat_dma’ dmaengine: ioat: remove unused ‘is_raid_device’ dmaengine: pl330: do not generate unaligned access dmaengine: k3dma: move to dma_pool_zalloc dmaengine: at_hdmac: move to dma_pool_zalloc dmaengine: at_xdmac: don't restore unsaved status dmaengine: ioat: set error code on failures dmaengine: ioat: set error code on failures dmaengine: DW DMAC: add multi-block property to device tree ...
2016-12-13Merge tag 'usb-4.10-rc1' of ↵Linus Torvalds3-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here's the big set of USB/PHY patches for 4.10-rc1. A number of new drivers are here in this set of changes. We have a new USB controller type "mtu3", a new usb-serial driver, and the usual churn in the gadget subsystem and the xhci host controller driver, along with a few other new small drivers added. And lots of little other changes all over the USB and PHY driver tree. Full details are in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits) USB: serial: option: add dlink dwm-158 USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041 USB: OHCI: nxp: fix code warnings USB: OHCI: nxp: remove useless extern declaration USB: OHCI: at91: remove useless extern declaration usb: misc: rio500: fix result type for error message usb: mtu3: fix U3 port link issue usb: mtu3: enable auto switch from U3 to U2 usbip: fix warning in vhci_hcd_probe/lockdep_init_map usb: core: usbport: Use proper LED API to fix potential crash usbip: add missing compile time generated files to .gitignore usb: hcd.h: construct hub class request constants from simpler constants USB: OHCI: ohci-pxa27x: remove useless functions USB: OHCI: omap: remove useless extern declaration USB: OHCI: ohci-omap: remove useless functions USB: OHCI: ohci-s3c2410: remove useless functions USB: cdc-acm: add device id for GW Instek AFG-125 fsl/usb: Workarourd for USB erratum-A005697 usb: hub: Wait for connection to be reestablished after port reset usbip: vudc: Refactor init_vudc_hw() to be more obvious ...
2016-12-13Merge tag 'clk-for-linus' of ↵Linus Torvalds7-0/+35
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This is a fairly quiet release. We don't have any patches to the core framework. The only patch that can even be considered "core" adds another clk_get() variant. The rest of the changes are in drivers for various SoCs, and we have a few bits for ARM shmobile architecture code (dts and mach) due to the dependency we're breaking between shmobile architecture code and its clk driver. Those shmobile bits have also been pulled into arm-soc tree. Here's the summary: Core: - Support for devm_get_clk_from_child() used with DT bindings that have subnodes with the 'clocks' property New Drivers: - Allwinner A64 (sun50i) - i.MX imx6ull - Socionext's UniPhier SoC CPUs - Mediatek MT2701 SoCs - Rockchip rk1108 SoCs - Qualcomm MSM8994/MSM8992 SoCS - Qualcomm RPM Clocks - Hisilicon Hi3516CV300 and Hi3798CV200 CRG - Oxford Semiconductor OX820 and OX810SE SoCs - Renesas RZ/G1M and RZ/GIE SoCs - Renesas R-Car RST driver for mode pin states Updates: - Four Allwinner SoCs are migrated to the new style clk driver - Rockchip rk3399,rk3066 PLL optimizations - i.MX LVDS display glitch fixes and AV PLL precision improvements - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL support - Explicit demodularization of always builtin drivers - Freescale Qoriq ls1012a and ls1046a support - Exynos 5433 parent typo fix and critical clock tagging - Renesas r8a7743/r8a7745 CPG - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support - stm32f4* LSI, LSE, RTC, and QSPI clocks - pxa27x and pxa25x cpufreq as clks - TI omap36xx sprz319 advisory 2.1 workaround - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate() clk: add devm_get_clk_from_child() API clk: st: clk-flexgen: Unmap region obtained by of_iomap clk: keystone: pll: Unmap region obtained by of_iomap clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc clk: cdce925: Fix limit check clk: bcm: Make COMMON_CLK_IPROC into a library clk: qoriq: added ls1012a clock configuration clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock clk: bcm: Support rate change propagation on bcm2835 clocks clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk clk: ti: omap36xx: Work around sprz319 advisory 2.1 clk: clk-wm831x: fix a logic error clk: uniphier: add cpufreq data for LD11, LD20 SoCs clk: uniphier: add CPU-gear change (cpufreq) support clk: qcom: Put venus core0/1 gdscs to hw control mode clk: qcom: gdsc: Add support for gdscs with HW control ...
2016-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-4/+7
2016-12-08ARM: dts: orion5x: fix number of sata port for linkstation ls-glRoger Shimizu1-0/+4
Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used. [0] https://bugs.debian.org/845611 Fixes: b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl") Reported-by: Ryan Tandy <ryan@nardis.ca> Tested-by: Ryan Tandy <ryan@nardis.ca> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-12-07ARM: dts: imx7d: fix LCDIF clock assignmentStefan Agner1-3/+2
The eLCDIF IP of the i.MX 7 SoC knows multiple clocks and lists them separately: Clock Clock Root Description apb_clk MAIN_AXI_CLK_ROOT AXI clock pix_clk LCDIF_PIXEL_CLK_ROOT Pixel clock ipg_clk_s MAIN_AXI_CLK_ROOT Peripheral access clock All of them are switched by a single gate, which is part of the IMX7D_LCDIF_PIXEL_ROOT_CLK clock. Hence using that clock also for the AXI bus clock (clock-name "axi") makes sure the gate gets enabled when accessing registers. There seem to be no separate AXI display clock, and the clock is optional. Hence remove the dummy clock. This fixes kernel freezes when starting the X-Server (which disables/re-enables the display controller). Fixes: e8ed73f691bd ("ARM: dts: imx7d: add lcdif support") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07dts: sun8i-h3: correct UART3 pin definitionsJorik Jonker1-1/+1
In a previous commit, I made a copy/paste error in the pinmux definitions of UART3: PG{13,14} instead of PA{13,14}. This commit takes care of that. I have tested this commit on Orange Pi PC and Orange Pi Plus, and it works for these boards. Fixes: e3d11d3c45c5 ("dts: sun8i-h3: add pinmux definitions for UART2-3") Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07Merge tag 'zynq-dt-for-4.10' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson8-9/+108
next/dt arm: Xilinx Zynq dt patches for v4.10 - Remove skeleton.dtsi - Fix DTC warnings - Coding style changes - Microzed support * tag 'zynq-dt-for-4.10' of https://github.com/Xilinx/linux-xlnx: arm: dts: zynq: Add MicroZed board support ARM: zynq: Fix pmu register description coding style ARM: zynq: Fix W=1 dtc 1.4 warnings ARM: zynq: Remove skeleton.dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07Merge tag 'davinci-for-v4.10/dt-4' of ↵Olof Johansson1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt - Add device tree nodes for pin pull-up/pull-down bias control on DA850. - Enable high speed support on DA850 MMC/SD * tag 'davinci-for-v4.10/dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-06ARM: dts: hix5hd2: add gmac generic compatible and clock namesDongpo Li1-2/+4
Add gmac generic compatible and clock names. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06arm: dts: zynq: Add MicroZed board supportJagan Teki2-0/+97
Added basic dts support for MicroZed board. - UART - SDHCI - Ethernet Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-05ARM: dts: da850: enable high speed for mmcAxel Haslam1-0/+4
The mmc controller in da850 supports high speed modes so add cap-sd-highspeed and cap-mmc-highspeed. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-2/+18
Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01ARM: dts: da850: Add node for pullup/pulldown pinconfDavid Lechner1-0/+5
This SoC has a separate pin controller for configuring pullup/pulldown bias on groups of pins. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-30Merge tag 'omap-for-v4.10/dt-late-signed' of ↵Arnd Bergmann13-16/+326
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "omap dts changes for v4.10, part 2" from Tony Lindgren: Second set of device tree changes for omaps for v4.10 merge window: - Fix up new instances of gpio-key,wakeup to use wakeup-source - Add beaglebone LCDC blue-and-red-wiring property to make use of the new driver features - Add bindings for IIO support for am335x and am437x - Add palmas PMIC overide powerhold property for am57xx - Update am335x-baltos to use phy-handle property - Add initial support for am571x-idk * tag 'omap-for-v4.10/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: AM571x-IDK Initial Support ARM: dts: am335x-baltos: use phy-phandle declarations ARM: dts: am57xx-idk-common: Add overide powerhold property ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property ARM: dts: am57xx-idk: Add Industrial output support ARM: dts: am57xx-idk: Add Industrial input support ARM: dts: am437x-idk: Add Industrial output support ARM: dts: am437x-idk: Add Industrial input support ARM: dts: am335x-icev2: Add ADC support ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming ARM: dts: am335x-icev2: Add Industrial input support ARM: dts: am335x-boneblack: Add blue-and-red-wiring -property to LCDC node ARM: dts: omap5: replace gpio-key,wakeup with wakeup-source property
2016-11-30Merge tag 'mvebu-dt-4.10-2' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann2-0/+341
Pull "mvebu dt for 4.10 (part 1)" from Gregory CLEMENT: Add Turris Omnia support, an open hardware router Armada 385 based * tag 'mvebu-dt-4.10-2' of git://git.infradead.org/linux-mvebu: ARM: dts: add support for Turris Omnia devicetree: Add vendor prefix for CZ.NIC
2016-11-30Merge tag 'berlin-dt-for-v4.10-1' of ↵Arnd Bergmann1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into next/dt Pull "Berlin DT changes for v4.10" from Jisheng Zhang: - fix DTC compiler warning - fix typo in chosen node * tag 'berlin-dt-for-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin: ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node ARM: dts: berlin2q-marvell-dmp: fix regulators' name
2016-11-30Merge tag 'v4.10-rockchip-dts32-2' of ↵Arnd Bergmann4-1/+540
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 changes for 4.10" from Heiko Stübner: A bit of attention for the rk3066, fixed tsadc reset node as well as enabling the dma for uart and mmc controllers. And one new soc, the rk1108 combining a single-core Cortex-A7 with a separate DSP core. * tag 'v4.10-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add the sdmmc pinctrl for rk1108 ARM: dts: rockchip: add rockchip RK1108 Evaluation board ARM: dts: rockchip: add basic support for RK1108 SOC clk: rockchip: add dt-binding header for rk1108 dt-bindings: rockchip-dw-mshc: add RK1108 dw-mshc description ARM: dts: rockchip: enable dma for uart and mmc on rk3066a ARM: dts: rockchip: fix TSADC reset node for rk3066a
2016-11-30Merge tag 'qcom-dts-for-4.10-2' of ↵Arnd Bergmann2-12/+20
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Pull "Qualcomm Device Tree Changes for v4.10 - Part 2" from Andy Gross: * Add SDHC xo clk * tag 'qcom-dts-for-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: Add xo to sdhc clock node on qcom platforms
2016-11-30Merge tag 'samsung-dt-4.10-2' of ↵Arnd Bergmann8-8/+23
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Samsung DeviceTree second update for v4.10" from Krzysztof Kozłowski: 1. Cleanups in MSHC nodes. 2. Enable ADC on Odroid boards. 3. Fix interrupt flags on recently added DMA sound nodes in Exynos5410. * tag 'samsung-dt-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Remove the cd-gpios property for eMMC of Odroid XU3/4 ARM: dts: exynos: Specify snps, dwmac in compatible string for gmac ARM: dts: exynos: Fix invalid GIC interrupt flags in audio block of Exynos5410 ARM: dts: exynos: Add ADCs on 4412 and 5422 based odroid boards. ARM: dts: exynos: Replace "clock-freq-min-max" with "max-frequency"
2016-11-30Merge tag 'arm-soc/for-4.10/devicetree' of ↵Arnd Bergmann30-22/+1417
http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.10" from Florian Fainelli: This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.10, please pull the following: - Rafal adds support for the Netgear R8500 routers, adds basic support for the Tenda AC9 router which uses the new BCM53573 SoC (single core Cortex A7). He also enables the UART on the Netgear R8000 and restructures the include files a bit for the BCM47094 SoC, finally he adds USB 3.0 PHY nodes which enables USB 3.0 on BCM5301X devices that support it. Finally he adds support for the TP-LINK Archer C9 V1 router. - Kamal adds support for the QSPI controller on the Northstar Plus SoCs and updates the bcm958625k reference board to have it enabled - Dan adds support for the Luxul XAP-1510 (using a BCM4708) and XWR-3100 (using a BCM47094) - Scott fixes the pinctrl names in the Cygnus DTS files - Jonathan enables the Broadcom iProc mailbox controller for Broadcom Cygnus/iProc SoCs, he adds interrupt support for the GPIO CRMU hardware block and finally adds the node for the OTP controller found on Cygnus SoCs - Dhananjay enables the GPIO B controller on Norstarh Plus SoCs - Eric defines standard pinctrl groups in the BCM2835 GPIO node - Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes to use their appropriate pinctrl functions - Linus adds names for the Raspberry Pi GPIO lines based on the datasheet - Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block - Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and Device Tree nodes he also fixes the Raspberry Pi GPIO lines names and finally adds names for the Raspberry Zero GPIO lines * tag 'arm-soc/for-4.10/devicetree' of http://github.com/Broadcom/stblinux: (29 commits) ARM: bcm2835: Add names for the RPi Zero GPIO lines ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines ARM: dts: enable GPIO-b for Broadcom NSP ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1 ARM: dts: Add node for Broadcom OTP controller driver ARM: dts: Enable interrupt support for cygnus crmu gpio driver ARM: dts: Enable Broadcom iProc mailbox controller ARM: bcm2835: Add names for the Raspberry Pi GPIO lines ARM: bcm2835: dts: add thermal node to device-tree of bcm283x dt: bindings: add thermal device driver for bcm2835 ARM: dts: bcm283x: fix typo in mailbox address DT: binding: bcm2835-mbox: fix address typo in example ARM: dts: cygnus: fix naming of pinctrl node ARM: BCM53573: Specify PMU and its ILP clock in the DT ARM: BCM5301X: Add DT for Luxul XWR-3100 ARM: BCM5301X: Add DT for Luxul XAP-1510 ARM: BCM5301X: Specify USB 3.0 PHY in DT ARM: BCM5301X: Enable UART on Netgear R8000 ARM: BCM5301X: Add separated DTS include file for BCM47094 ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes ...
2016-11-30Merge tag 'socfpga_dts_for_v4.10_part_3' of ↵Arnd Bergmann1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt Merge "SoCFPGA DTS update for v4.10, part 3" from Dinh Nguyen: - Fine tune L2 cache configuration * tag 'socfpga_dts_for_v4.10_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: fine-tune L2 cache configuration
2016-11-30Merge tag 'renesas-dt2-for-v4.10' of ↵Arnd Bergmann15-12/+1220
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.10" from Simon Horman: Enhancements: * Add device nodes for PRR * Add r8a7745 SoC and sk-rzg1e board * Add r8a7743 SoC and sk-rzg1m board * Enable SDR-104 and I2C demuxer on alt, koelsch and lager boards Corrections: * Use SYSC "always-on" PM Domain for sound on r8a7794 SoC * Correct hsusb parent clock on r8a7794 SoC * Correct PFC names for DU on alt board * tag 'renesas-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits) ARM: dts: r8a7794: Add device node for PRR ARM: dts: r8a7793: Add device node for PRR ARM: dts: r8a7792: Add device node for PRR ARM: dts: r8a7791: Add device node for PRR ARM: dts: r8a7790: Add device node for PRR ARM: dts: r8a7779: Add device node for PRR ARM: dts: r8a73a4: Add device node for PRR ARM: dts: sk-rzg1e: add Ether support ARM: dts: sk-rzg1e: initial device tree ARM: dts: r8a7745: add IRQC support ARM: dts: r8a7745: add Ether support ARM: dts: r8a7745: add [H]SCIF{|A|B} support ARM: dts: r8a7745: add SYS-DMAC support ARM: dts: r8a7745: initial SoC device tree ARM: dts: sk-rzg1m: add Ether support ARM: dts: sk-rzg1m: initial device tree ARM: dts: r8a7743: add IRQC support ARM: dts: r8a7743: add Ether support ARM: dts: r8a7743: add [H]SCIF{A|B} support ARM: dts: r8a7743: add SYS-DMAC support ...
2016-11-30Merge tag 'davinci-for-v4.10/dt-3' of ↵Arnd Bergmann2-1/+12
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt Pull "DaVinci DT updates for v4.10 (part 3)" from Sekhar Nori: Some fixes for device-tree patches already queued. - Fix SD card detect polarity - Prevent Ethernet from picking a random mac address - Fix error messages on platforms which dont use bus master and emif priority settings. * tag 'davinci-for-v4.10/dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850: enable memctrl and mstpri nodes per board ARM: dts: da850-lcdk: Add ethernet0 alias to DT ARM: dts: da850-lcdk: fix mmc card detect polarity
2016-11-30Merge tag 'davinci-for-v4.10/dt-2' of ↵Arnd Bergmann2-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt Pull "DaVinci DT updates for v4.10 (part 2)" from Sekhar Nori: Adds device tree nodes enabling DDR controller and bus master priority settings needed for stable LCDC operation on DA850. Also adds support for MUSB device on DA850 providing USB OTG support. * tag 'davinci-for-v4.10/dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Enable the usb otg device node ARM: dts: da850: Add the usb otg device node ARM: dts: da850: add the mstpri and ddrctl nodes
2016-11-30dmaengine: DW DMAC: add multi-block property to device treeEugeniy Paltsev1-0/+2
Several versions of DW DMAC have multi block transfers hardware support. Hardware support of multi block transfers is disabled by default if we use DT to configure DMAC and software emulation of multi block transfers used instead. Add multi-block property, so it is possible to enable hardware multi block transfers (if present) via DT. Switch from per device is_nollp variable to multi_block array to be able enable/disable multi block transfers separately per channel. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-28ARM: dts: da850: enable memctrl and mstpri nodes per boardBartosz Golaszewski2-0/+10
Currently the memory controller and master priorities drivers are enabled in da850.dtsi. For boards for which there are no settings defined, this makes these drivers emit error messages. Disable the nodes in da850.dtsi and only enable them for da850-lcdk - the only board that currently needs them. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-28Merge 4.9-rc7 into usb-nextGreg Kroah-Hartman6-13/+23
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-28ARM: dts: da850-lcdk: Add ethernet0 alias to DTFabien Parent1-0/+1
In order to avoid Linux generating a random mac address on every boot, add an ethernet0 alias that will allow u-boot to patch the dtb with the MAC address programmed into the EEPROM. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-26Merge tag 'sunxi-dt-for-4.10-bis' of ↵Arnd Bergmann30-173/+1277
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Pull "Allwinner DT additions for 4.10, bis" from Maxime Ripard: The usual bunch of DT additions, but most notably: - A31 DRM driver - A31 audio codec - WiFi for the A80-Based boards and the CHIP - Support for the NextThing Co CHIP Pro (the first board with NAND enabled) - New board: NanoPi M1 * tag 'sunxi-dt-for-4.10-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (41 commits) ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA bridge ARM: dts: sun5i: Add touchscreen node to reference-design-tablet.dtsi ARM: sunxi: Add the missing clocks to the pinctrl nodes ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG ARM: dts: sun7i: bananapi-m1-plus: Add PMIC regulators ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support ARM: sun8i: sina33: Enable USB gadget ARM: dts: sun8i: reference-design-tablet: ldo_io1 is vcc-touchscreen ARM: dts: sun8i: replace enable-sdio-wakeup with wakeup-source for BananaPi M1+ ARM: gr8: evb: Add i2s codec ARM: dts: sun6i: sina31s: Enable internal audio codec ARM: dts: sun6i: hummingbird: Enable internal audio codec ARM: dts: sun6i: Add audio codec device node ARM: gr8: evb: Enable SPDIF ARM: dts: sun8i: Add SPI controller node in H3 ARM: dts: sun8i: Add SPI pinctrl node in H3 ARM: dts: sun8i: Add dts file for NanoPi M1 SBC ARM: dts: sun8i: Use the common file in NanoPi NEO SBC ARM: dts: sun8i: Add common dtsi file for NanoPi SBCs ARM: dts: sun9i: cubieboard4: Enable AP6330 WiFi ...
2016-11-26Merge tag 'mvebu-dt-4.10-1' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann32-845/+1042
Pull "mvebu dt for 4.10 (part 1)" from Gregory CLEMENT: Add missing pinmux declaration for netgear NASes Fix i2c compatible string for netgear NASes Fix on a wrong comment about PLL frequency Fix spelling mistake of the manufacturer's name of the Topkick Add dt support for the orion5x ls-chl Linkstation device First step of fixing DTC warning for Armada 370, 375 and XP * tag 'mvebu-dt-4.10-1' of git://git.infradead.org/linux-mvebu: (30 commits) ARM: dts: armada-375: Fixup ethernet child DT warning ARM: dts: armada-375: Fixup memory DT warning ARM: dts: armada-375: Remove skeleton.dtsi ARM: dts: armada-375: Fixup pinctrl DT warnings ARM: dts: armada-375: Fixup pcie DT warnings ARM: dts: armada-375: Fixup mdio DT warning ARM: dts: armada-375: Use the node labels ARM: dts: armada-375: Add node labels ARM: dts: armada-370-xp: Fixup regulator DT warning ARM: dts: armada-370-xp: Remove button address and fixup names ARM: dts: armada-370-xp: Remove address from dsa unit name ARM: dts: armada-370-xp: Fixup memory DT warning ARM: dts: armada-370-xp: Fixup l2-cache DT warning ARM: dts: armada-370-xp: Remove skeleton.dtsi ARM: dts: armada-370: Fixup pcie DT warnings ARM: dts: armada-xp: Fixup pcie DT warnings ARM: dts: armada-370-xp: Fixup mdio DT warning ARM: dts: armada-370-xp: Use the node labels ARM: dts: armada-370-xp: add node labels ARM: dts: armada-370-xp: move the cpurst node in the common file ...
2016-11-26Merge tag 'qcom-dts-for-4.10-1' of ↵Arnd Bergmann10-3/+1645
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Pull "Qualcomm Device Tree Changes for v4.10 - v2" from Andy Gross: * Add EBI2 support to MSM8660 * Add SMSC ethernet support to APQ8060 * Add support for display, pstore, iommu, and hdmi to APQ8064 * Add SDHCI node to MSM8974 Hammerhead * Add WP8548 MangOH board support (MDM9615) * tag 'qcom-dts-for-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: add SMSC ethernet on the APQ8060 Dragonboard ARM: dts: add EBI2 to the Qualcomm MSM8660 DTSI arm: dts: qcom: apq8064-nexus7: Add pstore support to nexus7 arm: dts: qcom: apq8064-nexus7: Add DSI and panel nodes arm: dts: qcom: apq8064: Add dsi, gpu and iommu nodes arm: dts: qcom: apq8064-ifc6410: Add HDMI support arm: dts: qcom: apq8064: Add display DT nodes ARM: dts: qcom: msm8974-hammerhead: Add sdhci1 node dt-bindings: arm: Add Sierra Wireless modules bindings ARM: dts: Add WP8548 based MangOH Green board DTS ARM: dts: Add Sierra Wireless WP8548 dtsi dt-bindings: qcom: Add MDM9615 bindings ARM: dts: Add MDM9615 dtsi
2016-11-26Merge tag 'pxa-dt-4.10' of https://github.com/rjarzmik/linux into next/dtArnd Bergmann3-2/+159
Pull "This device-tree pxa update brings" from Robert Jarzmik: - pxa25x support - cpu operating points in preparation for cpufreq-dt - small fixes * tag 'pxa-dt-4.10' of https://github.com/rjarzmik/linux: ARM: dts: pxa: add pxa27x cpu operating points ARM: dts: pxa: add pxa25x cpu operating points ARM: dts: pxa: fix gpio0 and gpio1 interrupts ARM: dts: pxa: fix no. of gpio cells in the pxa gpio binding documentation ARM: dts: pxa: add pxa25x .dtsi file
2016-11-26ARM: dts: artpec: add pcie supportNiklas Cassel2-1/+32
Add PCIe support to the ARTPEC-6 SoC. This uses the existing pcie-artpec6 driver. So, all that is needed is device tree entries in the DTS. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2016-11-25Merge tag 'oxnas-arm-soc-dt-for-4.10' of https://github.com/OXNAS/linux into ↵Arnd Bergmann3-1/+392
next/dt Pull "ARM: OXNAS SoC DT updates for 4.10" from Neil Armstrong: - Add DTSI for Oxford Semiconductor OX820 - Add DTS for Cloud Engines PogoPlug v3 board - Fix MAINTAINERS Oxnas entry for dts files from http://lkml.kernel.org/r/20161102141850.25164-1-narmstrong@baylibre.com * tag 'oxnas-arm-soc-dt-for-4.10' of https://github.com/OXNAS/linux: MAINTAINERS: oxnas: Add new files definitions ARM: dts: Add support for OX820 and Pogoplug V3
2016-11-25Merge tag 'sti-dt-for-v4.9-rc-round2' of ↵Arnd Bergmann1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into fixes Pull "STi DT fix" from Patrice Chotard: The I2C nodes are missing #address-cells and #size-cells. This is causing warning at device tree compilation when some I2C device sub-nodes are defined. * tag 'sti-dt-for-v4.9-rc-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: STiH407-family: fix i2c nodes
2016-11-25Merge tag 'sunxi-fixes-for-4.9-2' of ↵Arnd Bergmann3-2/+2
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Pull "Allwinner fixes for 4.9, second iteration" from Maxime Ripard: A renaming of the GR8 DTSI and DTS to make it explicitly part of the sun5i family. * tag 'sunxi-fixes-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: gr8: Rename the DTSI and relevant DTS
2016-11-25ARM: dts: add support for Turris OmniaUwe Kleine-König2-0/+341
This machine is an open hardware router by cz.nic driven by a Marvell Armada 385. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-25ARM: dts: berlin2q-marvell-dmp: fix typo in chosen nodeMasahiro Yamada1-1/+1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
2016-11-25ARM: dts: berlin2q-marvell-dmp: fix regulators' nameJisheng Zhang1-5/+5
This patch fixes the following DTC warnings with W=1: Warning (unit_address_vs_reg): Node /regulators/regulator@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulators/regulator@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulators/regulator@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulators/regulator@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulators/regulator@4 has a unit name, but no reg property Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
2016-11-24ARM: dts: Add xo to sdhc clock node on qcom platformsRitesh Harjani2-12/+20
Add xo entry to sdhc clock node on all qcom platforms. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-23ARM: dts: r8a7794: Add device node for PRRGeert Uytterhoeven1-0/+5
Add a device node for the Product Register, which provides SoC product and revision information. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-23ARM: dts: r8a7793: Add device node for PRRGeert Uytterhoeven1-0/+5
Add a device node for the Product Register, which provides SoC product and revision information. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-23ARM: dts: r8a7792: Add device node for PRRGeert Uytterhoeven1-0/+5
Add a device node for the Product Register, which provides SoC product and revision information. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-23ARM: dts: r8a7791: Add device node for PRRGeert Uytterhoeven1-0/+5
Add a device node for the Product Register, which provides SoC product and revision information. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-23ARM: dts: r8a7790: Add device node for PRRGeert Uytterhoeven1-0/+5
Add a device node for the Product Register, which provides SoC product and revision information. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-23ARM: dts: r8a7779: Add device node for PRRGeert Uytterhoeven1-0/+5
Add a device node for the Product Register, which provides SoC product and revision information. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 01:03:55 +0000