summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-12-23Merge tag 'for-linus' of ↵Linus Torvalds15-43/+90
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "First round of -rc fixes for 4.10 kernel: - a series of qedr fixes - a series of rxe fixes - one i40iw fix - one cma fix - one cxgb4 fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/rxe: Don't check for null ptr in send() IB/rxe: Drop future atomic/read packets rather than retrying IB/rxe: Use BTH_PSN_MASK when ACKing duplicate sends qedr: Always notify the verb consumer of flushed CQEs qedr: clear the vendor error field in the work completion qedr: post_send/recv according to QP state qedr: ignore inline flag in read verbs qedr: modify QP state to error when destroying it qedr: return correct value on modify qp qedr: return error if destroy CQ failed qedr: configure the number of CQEs on CQ creation i40iw: Set 128B as the only supported RQ WQE size IB/cma: Fix a race condition in iboe_addr_get_sgid() IB/rxe: Fix a memory leak in rxe_qp_cleanup() iw_cxgb4: set correct FetchBurstMax for QPs
2016-12-23Merge tag 'scsi-for-linus' of ↵Linus Torvalds64-695/+9670
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull late SCSI updates from James Bottomley: "This is mostly stuff which missed the initial pull. There's a new driver: qedi, and some ufs, ibmvscsis and ncr5380 updates plus some assorted driver fixes and also a fix for the bug where if a device goes into a blocked state between configuration and sysfs device add (which can be a long time under async probing) it would become permanently blocked" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits) scsi: avoid a permanent stop of the scsi device's request queue scsi: mpt3sas: Recognize and act on iopriority info scsi: qla2xxx: Fix Target mode handling with Multiqueue changes. scsi: qla2xxx: Add Block Multi Queue functionality. scsi: qla2xxx: Add multiple queue pair functionality. scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls. scsi: qla2xxx: Only allow operational MBX to proceed during RESET. scsi: hpsa: remove memory allocate failure message scsi: Update 3ware driver email addresses scsi: zfcp: fix rport unblock race with LUN recovery scsi: zfcp: do not trace pure benign residual HBA responses at default level scsi: zfcp: fix use-after-"free" in FC ingress path after TMF scsi: libcxgbi: return error if interface is not up scsi: cxgb4i: libcxgbi: add missing module_put() scsi: cxgb4i: libcxgbi: cxgb4: add T6 iSCSI completion feature scsi: cxgb4i: libcxgbi: add active open cmd for T6 adapters scsi: cxgb4i: use cxgb4_tp_smt_idx() to get smt_idx scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework. scsi: aacraid: remove wildcard for series 9 controllers scsi: ibmvscsi: add write memory barrier to CRQ processing ...
2016-12-23Merge tag 'arc-4.10-rc1-part2' of ↵Linus Torvalds9-35/+46
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull more ARC updates from Vineet Gupta: - Fix for aliasing VIPT dcache in old ARC700 cores - micro-optimization in ARC700 ProtV handler - Enable SG_CHAIN [Vladimir] - ARC HS38 core intc default to prio 1 * tag 'arc-4.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: mm: arc700: Don't assume 2 colours for aliasing VIPT dcache ARC: mm: No need to save cache version in @cpuinfo ARC: enable SG chaining ARCv2: intc: default all interrupts to priority 1 ARCv2: entry: document intr disable in hard isr ARC: ARCompact entry: elide re-reading ECR in ProtV handler
2016-12-23Merge branch 'mlxsw-router-fixes'David S. Miller2-4/+10
Jiri Pirko says: ==================== mlxsw: Router fixes Ido says: First two patches ensure we remove from the device's table neighbours that are considered to be dead by the neighbour core. The last patch removes nexthop groups from the device when they are no longer valid. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23mlxsw: spectrum_router: Correctly remove nexthop groupsIdo Schimmel1-0/+3
At the end of the nexthop initialization process we determine whether the nexthop should be offloaded or not based on the NUD state of the neighbour representing it. After all the nexthops were initialized we refresh the nexthop group and potentially offload it to the device, in case some of the nexthops were resolved. Make the destruction of a nexthop group symmetric with its creation by marking all nexthops as invalid and then refresh the nexthop group to make sure it was removed from the device's tables. Fixes: b2157149b0b0 ("mlxsw: spectrum_router: Add the nexthop neigh activity update") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23mlxsw: spectrum_router: Don't reflect dead neighsIdo Schimmel1-4/+6
When a neighbour is considered to be dead, we should remove it from the device's table regardless of its NUD state. Without this patch, after setting a port to be administratively down we get the following errors when we periodically try to update the kernel about neighbours activity: [ 461.947268] mlxsw_spectrum 0000:03:00.0 sw1p3: Failed to find matching neighbour for IP=192.168.100.2 Fixes: a6bf9e933daf ("mlxsw: spectrum_router: Offload neighbours based on NUD state change") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23neigh: Send netevent after marking neigh as deadIdo Schimmel1-0/+1
neigh_cleanup_and_release() is always called after marking a neighbour as dead, but it only notifies user space and not in-kernel listeners of the netevent notification chain. This can cause multiple problems. In my specific use case, it causes the listener (a switch driver capable of L3 offloads) to believe a neighbour entry is still valid, and is thus erroneously kept in the device's table. Fix that by sending a netevent after marking the neighbour as dead. Fixes: a6bf9e933daf ("mlxsw: spectrum_router: Offload neighbours based on NUD state change") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23ipv6: handle -EFAULT from skb_copy_bitsDave Jones1-1/+5
By setting certain socket options on ipv6 raw sockets, we can confuse the length calculation in rawv6_push_pending_frames triggering a BUG_ON. RIP: 0010:[<ffffffff817c6390>] [<ffffffff817c6390>] rawv6_sendmsg+0xc30/0xc40 RSP: 0018:ffff881f6c4a7c18 EFLAGS: 00010282 RAX: 00000000fffffff2 RBX: ffff881f6c681680 RCX: 0000000000000002 RDX: ffff881f6c4a7cf8 RSI: 0000000000000030 RDI: ffff881fed0f6a00 RBP: ffff881f6c4a7da8 R08: 0000000000000000 R09: 0000000000000009 R10: ffff881fed0f6a00 R11: 0000000000000009 R12: 0000000000000030 R13: ffff881fed0f6a00 R14: ffff881fee39ba00 R15: ffff881fefa93a80 Call Trace: [<ffffffff8118ba23>] ? unmap_page_range+0x693/0x830 [<ffffffff81772697>] inet_sendmsg+0x67/0xa0 [<ffffffff816d93f8>] sock_sendmsg+0x38/0x50 [<ffffffff816d982f>] SYSC_sendto+0xef/0x170 [<ffffffff816da27e>] SyS_sendto+0xe/0x10 [<ffffffff81002910>] do_syscall_64+0x50/0xa0 [<ffffffff817f7cbc>] entry_SYSCALL64_slow_path+0x25/0x25 Handle by jumping to the failure path if skb_copy_bits gets an EFAULT. Reproducer: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #define LEN 504 int main(int argc, char* argv[]) { int fd; int zero = 0; char buf[LEN]; memset(buf, 0, LEN); fd = socket(AF_INET6, SOCK_RAW, 7); setsockopt(fd, SOL_IPV6, IPV6_CHECKSUM, &zero, 4); setsockopt(fd, SOL_IPV6, IPV6_DSTOPTS, &buf, LEN); sendto(fd, buf, 1, 0, (struct sockaddr *) buf, 110); } Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23inet: fix IP(V6)_RECVORIGDSTADDR for udp socketsWillem de Bruijn2-2/+2
Socket cmsg IP(V6)_RECVORIGDSTADDR checks that port range lies within the packet. For sockets that have transport headers pulled, transport offset can be negative. Use signed comparison to avoid overflow. Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Reported-by: Nisar Jagabar <njagabar@cloudmark.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23Merge branch 'cls_flower-act_tunnel_key-fixes'David S. Miller2-13/+14
Or Gerlitz says: ==================== net/sched fixes for cls_flower and act_tunnel_key This small series contain a fix to the matching flags support in flower and to the tunnel key action MD prep for IPv6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23net/sched: cls_flower: Mandate mask when matching on flagsOr Gerlitz1-11/+12
When matching on flags, we should require the user to provide the mask and avoid using an all-ones mask. Not doing so causes matching on flags provided w.o mask to hit on the value being unset for all flags, which may not what the user wanted to happen. Fixes: faa3ffce7829 ('net/sched: cls_flower: Add support for matching on flags') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Paul Blakey <paulb@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23net/sched: act_tunnel_key: Fix setting UDP dst port in metadata under IPv6Or Gerlitz1-2/+2
The UDP dst port was provided to the helper function which sets the IPv6 IP tunnel meta-data under a wrong param order, fix that. Fixes: 75bfbca01e48 ('net/sched: act_tunnel_key: Add UDP dst port option') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23stmmac: CSR clock configuration fixjpinto3-6/+6
When testing stmmac with my QoS reference design I checked a problem in the CSR clock configuration that was impossibilitating the phy discovery, since every read operation returned 0x0000ffff. This patch fixes the issue. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-22Merge branch 'work.namespace' into for-linusAl Viro2-44/+38
2016-12-22sg_write()/bsg_write() is not fit to be called under KERNEL_DSAl Viro2-0/+6
Both damn things interpret userland pointers embedded into the payload; worse, they are actually traversing those. Leaving aside the bad API design, this is very much _not_ safe to call with KERNEL_DS. Bail out early if that happens. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22ufs: fix function declaration for ufs_truncate_blocksJeff Layton1-1/+1
sparse says: fs/ufs/inode.c:1195:6: warning: symbol 'ufs_truncate_blocks' was not declared. Should it be static? Note that the forward declaration in the file is already marked static. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22fs: exec: apply CLOEXEC before changing dumpable task flagsAleksa Sarai1-2/+8
If you have a process that has set itself to be non-dumpable, and it then undergoes exec(2), any CLOEXEC file descriptors it has open are "exposed" during a race window between the dumpable flags of the process being reset for exec(2) and CLOEXEC being applied to the file descriptors. This can be exploited by a process by attempting to access /proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE. The race in question is after set_dumpable has been (for get_link, though the trace is basically the same for readlink): [vfs] -> proc_pid_link_inode_operations.get_link -> proc_pid_get_link -> proc_fd_access_allowed -> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS); Which will return 0, during the race window and CLOEXEC file descriptors will still be open during this window because do_close_on_exec has not been called yet. As a result, the ordering of these calls should be reversed to avoid this race window. This is of particular concern to container runtimes, where joining a PID namespace with file descriptors referring to the host filesystem can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect against access of CLOEXEC file descriptors -- file descriptors which may reference filesystem objects the container shouldn't have access to). Cc: dev@opencontainers.org Cc: <stable@vger.kernel.org> # v3.2+ Reported-by: Michael Crosby <crosbymichael@gmail.com> Signed-off-by: Aleksa Sarai <asarai@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22seq_file: reset iterator to first record for zero offsetTomasz Majchrzak1-0/+7
If kernfs file is empty on a first read, successive read operations using the same file descriptor will return no data, even when data is available. Default kernfs 'seq_next' implementation advances iterator position even when next object is not there. Kernfs 'seq_start' for following requests will not return iterator as position is already on the second object. This defect doesn't allow to monitor badblocks sysfs files from MD raid. They are initially empty but if data appears at some stage, userspace is not able to read it. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22vfs: fix isize/pos/len checks for reflink & dedupeDarrick J. Wong3-9/+13
Strengthen the checking of pos/len vs. i_size, clarify the return values for the clone prep function, and remove pointless code. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22[iov_iter] fix iterate_all_kinds() on empty iteratorsAl Viro1-29/+26
Problem similar to ones dealt with in "fold checks into iterate_and_advance()" and followups, except that in this case we really want to do nothing when asked for zero-length operation - unlike zero-length iterate_and_advance(), zero-length iterate_all_kinds() has no side effects, and callers are simpler that way. That got exposed when copy_from_iter_full() had been used by tipc, which builds an msghdr with zero payload and (now) feeds it to a primitive based on iterate_all_kinds() instead of iterate_and_advance(). Reported-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22move aio compat to fs/aio.cAl Viro4-82/+98
... and fix the minor buglet in compat io_submit() - native one kills ioctx as cleanup when put_user() fails. Get rid of bogus compat_... in !CONFIG_AIO case, while we are at it - they should simply fail with ENOSYS, same as for native counterparts. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22Merge branch 'misc' into for-linusJames Bottomley14-165/+283
2016-12-22perf sched timehist: Fix invalid period calculationNamhyung Kim1-1/+1
When --time option is given with a value outside recorded time, the last sample time (tprev) was set to that value and run time calculation might be incorrect. This is a problem of the first samples for each cpus since it would skip the runtime update when tprev is 0. But with --time option it had non-zero (which is invalid) value so the calculation is also incorrect. For example, let's see the followging: $ perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 3195.968367 [0003] <idle> 0.000 0.000 0.000 3195.968386 [0002] Timer[4306/4277] 0.000 0.000 0.018 3195.968397 [0002] Web Content[4277] 0.000 0.000 0.000 3195.968595 [0001] JS Helper[4302/4277] 0.000 0.000 0.000 3195.969217 [0000] <idle> 0.000 0.000 0.621 3195.969251 [0001] kworker/1:1H[291] 0.000 0.000 0.033 The sample starts at 3195.968367 but when I gave a time interval from 3194 to 3196 (in sec) it will calculate the whole 2 second as runtime. In below, 2 cpus accounted it as runtime, other 2 cpus accounted it as idle time. Before: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 1995.991 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 1999.852 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 3724.940 After: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 10.811 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 18.337 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 18.139 Committer notes: Further testing: Before: Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 937.944 msec CPU 2 idle for 188.931 msec CPU 3 idle for 986.185 msec After: # perf sched timehist --time 40602,40603 -s | tail Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 175.407 msec CPU 2 idle for 188.931 msec CPU 3 idle for 223.657 msec Total number of unique tasks: 68 Total number of context switches: 814 Total run time (msec): 97.688 # for cpu in `seq 0 3` ; do echo -n "CPU $cpu idle for " ; perf sched timehist --time 40602,40603 | grep "\[000${cpu}\].*\<idle\>" | tr -s ' ' | cut -d' ' -f7 | awk '{entries++ ; s+=$1} END {print s " msec (entries: " entries ")"}' ; done CPU 0 idle for 229.721 msec (entries: 123) CPU 1 idle for 175.381 msec (entries: 65) CPU 2 idle for 188.903 msec (entries: 56) CPU 3 idle for 223.61 msec (entries: 102) Difference due to the idle stats being accounted at nanoseconds precision while the <idle> entries in 'perf sched timehist' are trucated at msec.usec. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 853b74071110 ("perf sched timehist: Add option to specify time window of interest") Link: http://lkml.kernel.org/r/20161222060350.17655-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Remove hardcoded 'comm_width' check at print_summaryNamhyung Kim1-3/+0
Now that the default 'comm_width' value is 30, no need to check that at print_summary, Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Enlarge default 'comm_width'Namhyung Kim1-1/+1
Current default value is 20 but it's easily changed to a bigger value as task has a long name and different tid and pid. And it makes the output not aligned. So change it to have a large value as summary shows. Committer notes: Before: # perf sched record ^C # perf sched timehist <SNIP> 40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020 40602.771512 [0003] <idle> 0.003 0.000 0.986 40602.771586 [0001] <idle> 0.020 0.000 1.049 40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020 40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116 40602.771776 [0000] <idle> 0.001 0.000 1.892 <SNIP> After: # perf sched timehist <SNIP> 40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020 40602.771512 [0003] <idle> 0.003 0.000 0.986 40602.771586 [0001] <idle> 0.020 0.000 1.049 40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020 40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116 <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Honour 'comm_width' when aligning the headersNamhyung Kim1-3/+4
Current default value is 20, but that may change in the future, so make places where we have 20 hardcoded use 'comm_width'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-23Merge tag 'drm-intel-next-fixes-2016-12-22' of ↵drm-fixes-for-4.10-rc1Dave Airlie12-95/+186
git://anongit.freedesktop.org/git/drm-intel into drm-fixes First set of i915 fixes for code in next. * tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: skip the first 4k of stolen memory on everything >= gen8 drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping drm/i915: Fix use after free in logical_render_ring_init drm/i915: disable PSR by default on HSW/BDW drm/i915: Fix setting of boost freq tunable drm/i915: tune down the fast link training vs boot fail drm/i915: Reorder phys backing storage release drm/i915/gen9: Fix PCODE polling during SAGV disabling drm/i915/gen9: Fix PCODE polling during CDCLK change notification drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is setting drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating drm/i915: drop the struct_mutex when wedged or trying to reset
2016-12-23Merge tag 'drm-misc-fixes-2016-12-22' of ↵Dave Airlie1-2/+5
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Here's the one lonely bugfix I talked about on irc. * tag 'drm-misc-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-misc: drivers/gpu/drm/ast: Fix infinite loop if read fails
2016-12-23Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-631/+1218
into drm-fixes - fix display regression on DCE6/8 - Powergating fixes for GFX8 - amdgpu SI fixes (golden settings, proper rev id setup, etc.) * 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amdgpu: update tile table for oland/hainan drm/amdgpu: update tile table for verde drm/amdgpu: update rev id for verde drm/amdgpu: update golden setting for verde drm/amdgpu: update rev id for oland drm/amdgpu: update golden setting for oland drm/amdgpu: update rev id for hainan drm/amdgpu: update golden setting for hainan drm/amdgpu: update rev id for pitcairn drm/amdgpu: update golden setting for pitcairn drm/amdgpu: update golden setting/tiling table of tahiti drm/amdgpu: fix cursor setting of dce6/dce8 drm/amdgpu: refine set clock gating for tonga/polaris drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11. drm/amdgpu: add new gfx cg flags. drm/amdgpu: fix pg can't be disabled by PG mask. drm/amdgpu: always initialize gfx pg for gfx_v8.0. drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney. drm/amdgpu: fix init save/restore list in gfx_v8.0 drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0. ...
2016-12-22Merge tag 'leds_for_4.10_email_update' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED maintainer email update from Jacek Anaszewski: "Update Jacek Anaszewski's email address" * tag 'leds_for_4.10_email_update' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: Update Jacek Anaszewski's email address
2016-12-22Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds9-30/+38
Pull block layer fixes from Jens Axboe: "Just a set of small fixes that have either been queued up after the original pull for this merge window, or just missed the original pull request. - a few bcache fixes/changes from Eric and Kent - add WRITE_SAME to the command filter whitelist frm Mauricio - kill an unused struct member from Ritesh - partition IO alignment fix from Stefan - nvme sysfs printf fix from Stephen" * 'for-linus' of git://git.kernel.dk/linux-block: block: check partition alignment nvme : Use correct scnprintf in cmb show block: allow WRITE_SAME commands with the SG_IO ioctl block: Remove unused member (busy) from struct blk_queue_tag bcache: partition support: add 16 minors per bcacheN device bcache: Make gc wakeup sane, remove set_task_state()
2016-12-22Merge tag 'acpi-extra-4.10-rc1' of ↵Linus Torvalds22-125/+224
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Here are new versions of two ACPICA changes that were deferred previously due to a problem they had introduced, two cleanups on top of them and the removal of a useless warning message from the ACPI core. Specifics: - Move some Linux-specific functionality to upstream ACPICA and update the in-kernel users of it accordingly (Lv Zheng) - Drop a useless warning (triggered by the lack of an optional object) from the ACPI namespace scanning code (Zhang Rui)" * tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel ACPI: do not warn if _BQC does not exist
2016-12-22Merge tag 'pm-fixes-4.10-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "They fix one bug introduced recently, a build warning and a kerneldoc function description. Specifics: - Prevent the acpi-cpufreq driver from crashing on exit by fixing a check against the __cpuhp_setup_state() return value and fix the kerneldoc description of that function to make it clear that it may return positive numbers on success too (Boris Ostrovsky) - Drop an incorrect __init annotation of a function in the s3c64xx cpufreq driver and fix a build warning generated (by older compilers) because of it (Arnd Bergmann)" * tag 'pm-fixes-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: s3c64xx: remove incorrect __init annotation cpufreq: Remove CPU hotplug callbacks only if they were initialized CPU/hotplug: Clarify description of __cpuhp_setup_state() return value
2016-12-22Merge tag 'mmc-v4.10-3' of ↵Linus Torvalds5-25/+39
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - further fix thread wake-up for requests - use a bounce buffer to fix DMA issue for SSR register read MMC host: - sdhci: Fix a regression for runtime PM - sdhci-cadence: Add a proper SoC specific DT compatible" * tag 'mmc-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sd: Meet alignment requirements for raw_ssr DMA mmc: core: Further fix thread wake-up mmc: sdhci: Fix to handle MMC_POWER_UNDEFINED mmc: sdhci-cadence: add Socionext UniPhier specific compatible string
2016-12-22Merge branch 'for-linus' of ↵Linus Torvalds5-2/+16
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull SElinux fix from James Morris: "From Paul: 'A small SELinux patch to fix some clang/llvm compiler warnings and ensure the tools under scripts work well in the face of kernel changes'" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: use the kernel headers when building scripts/selinux
2016-12-22Merge branch 'x86-cache-for-linus' of ↵Linus Torvalds20-25/+2320
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache allocation interface from Thomas Gleixner: "This provides support for Intel's Cache Allocation Technology, a cache partitioning mechanism. The interface is odd, but the hardware interface of that CAT stuff is odd as well. We tried hard to come up with an abstraction, but that only allows rather simple partitioning, but no way of sharing and dealing with the per package nature of this mechanism. In the end we decided to expose the allocation bitmaps directly so all combinations of the hardware can be utilized. There are two ways of associating a cache partition: - Task A task can be added to a resource group. It uses the cache partition associated to the group. - CPU All tasks which are not member of a resource group use the group to which the CPU they are running on is associated with. That allows for simple CPU based partitioning schemes. The main expected user sare: - Virtualization so a VM can only trash only the associated part of the cash w/o disturbing others - Real-Time systems to seperate RT and general workloads. - Latency sensitive enterprise workloads - In theory this also can be used to protect against cache side channel attacks" [ Intel RDT is "Resource Director Technology". The interface really is rather odd and very specific, which delayed this pull request while I was thinking about it. The pull request itself came in early during the merge window, I just delayed it until things had calmed down and I had more time. But people tell me they'll use this, and the good news is that it is _so_ specific that it's rather independent of anything else, and no user is going to depend on the interface since it's pretty rare. So if push comes to shove, we can just remove the interface and nothing will break ] * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) x86/intel_rdt: Implement show_options() for resctrlfs x86/intel_rdt: Call intel_rdt_sched_in() with preemption disabled x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount x86/intel_rdt: Fix setting of closid when adding CPUs to a group x86/intel_rdt: Update percpu closid immeditately on CPUs affected by changee x86/intel_rdt: Reset per cpu closids on unmount x86/intel_rdt: Select KERNFS when enabling INTEL_RDT_A x86/intel_rdt: Prevent deadlock against hotplug lock x86/intel_rdt: Protect info directory from removal x86/intel_rdt: Add info files to Documentation x86/intel_rdt: Export the minimum number of set mask bits in sysfs x86/intel_rdt: Propagate error in rdt_mount() properly x86/intel_rdt: Add a missing #include MAINTAINERS: Add maintainer for Intel RDT resource allocation x86/intel_rdt: Add scheduler hook x86/intel_rdt: Add schemata file x86/intel_rdt: Add tasks files x86/intel_rdt: Add cpus file x86/intel_rdt: Add mkdir to resctrl file system x86/intel_rdt: Add "info" files to resctrl file system ...
2016-12-22MAINTAINERS: Update Jacek Anaszewski's email addressJacek Anaszewski1-2/+2
My previous email address is no longer valid. From now on, jacek.anaszewski@gmail.com should be used instead. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2016-12-22perf/x86: Fix overlap counter scheduling bugPeter Zijlstra1-1/+1
Jiri reported the overlap scheduling exceeding its max stack. Looking at the constraint that triggered this, it turns out the overlap marker isn't needed. The comment with EVENT_CONSTRAINT_OVERLAP states: "This is the case if the counter mask of such an event is not a subset of any other counter mask of a constraint with an equal or higher weight". Esp. that latter part is of interest here I think, our overlapping mask is 0x0e, that has 3 bits set and is the highest weight mask in on the PMU, therefore it will be placed last. Can we still create a scenario where we would need to rewind that? The scenario for AMD Fam15h is we're having masks like: 0x3F -- 111111 0x38 -- 111000 0x07 -- 000111 0x09 -- 001001 And we mark 0x09 as overlapping, because it is not a direct subset of 0x38 or 0x07 and has less weight than either of those. This means we'll first try and place the 0x09 event, then try and place 0x38/0x07 events. Now imagine we have: 3 * 0x07 + 0x09 and the initial pick for the 0x09 event is counter 0, then we'll fail to place all 0x07 events. So we'll pop back, try counter 4 for the 0x09 event, and then re-try all 0x07 events, which will now work. The masks on the PMU in question are: 0x01 - 0001 0x03 - 0011 0x0e - 1110 0x0c - 1100 But since all the masks that have overlap (0xe -> {0xc,0x3}) and (0x3 -> 0x1) are of heavier weight, it should all work out. Reported-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Liang Kan <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vince@deater.net> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20161109155153.GQ3142@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-22perf/x86/pebs: Fix handling of PEBS buffer overflowsStephane Eranian1-9/+21
This patch solves a race condition between PEBS and the PMU handler. In case multiple PEBS events are sampled at the same time, it is possible to have GLOBAL_STATUS bit 62 set indicating PEBS buffer overflow and also seeing at most 3 PEBS counters having their bits set in the status register. This is a sign that there was at least one PEBS record pending at the time of the PMU interrupt. PEBS counters must only be processed via the drain_pebs() calls, and not via the regular sample processing loop coming after that the function, otherwise phony regular samples may be generated in the sampling buffer not marked with the EXACT tag. Another possibility is to have one PEBS event and at least one non-PEBS event whic hoverflows while PEBS has armed. In this case, bit 62 of GLOBAL_STATUS will not be set, yet the overflow status bit for the PEBS counter will be on Skylake. To avoid this problem, we systematically ignore the PEBS-enabled counters from the GLOBAL_STATUS mask and we always process PEBS events via drain_pebs(). The problem manifested itself by having non-exact samples when sampling only PEBS events, i.e., the PERF_SAMPLE_RECORD would not have the EXACT flag set. Note that this problem is only present on Skylake processor. This fix is harmless on older processors. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1482395366-8992-1-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-22x86/paravirt: Mark unused patch_default labelPeter Zijlstra2-2/+2
A bugfix commit: 45dbea5f55c0 ("x86/paravirt: Fix native_patch()") ... introduced a harmless warning: arch/x86/kernel/paravirt_patch_32.c: In function 'native_patch': arch/x86/kernel/paravirt_patch_32.c:71:1: error: label 'patch_default' defined but not used [-Werror=unused-label] Fix it by annotating the label as __maybe_unused. Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Piotr Gregor <piotrgregor@rsyncme.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 45dbea5f55c0 ("x86/paravirt: Fix native_patch()") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-22IB/rxe: Don't check for null ptr in send()Andrew Boyer1-2/+1
pkt->qp was already dereferenced earlier in the function. Fixes Smatch complaint: drivers/infiniband/sw/rxe/rxe_net.c:458 send() warn: variable dereferenced before check 'pkt->qp' (see line 441) Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22IB/rxe: Drop future atomic/read packets rather than retryingAndrew Boyer1-1/+1
If the completer is in the middle of a large read operation, one lost packet can cause havoc. Going to COMPST_ERROR_RETRY will cause the requester to resend the request. After that, any packet from the first attempt still in the receive queue will be interpreted as an error, restarting the error/retry sequence. The transfer will quickly exhaust its retries. This behavior is very noticeable when doing 512KB reads on a QEMU system configured with 1500B MTU. Also, a resent request here will prompt the responder on the other side to immediately start resending, but the resent packets will get stuck in the already-loaded receive queue and will never be processed. Rather than erroring out every time an unexpected future packet arrives, just drop it. Eventually the retry timer will send a duplicate request; the completer will be able to make progress since the queue will start relatively empty. Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22IB/rxe: Use BTH_PSN_MASK when ACKing duplicate sendsAndrew Boyer1-1/+2
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: Always notify the verb consumer of flushed CQEsAmrani, Ram1-1/+1
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: clear the vendor error field in the work completionAmrani, Ram1-0/+3
We clear the vendor error field in the work completion so that if a work completion is erroneous the field won't confuse the caller. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: post_send/recv according to QP stateAmrani, Ram1-4/+4
Enable posting to SQ only in RTS, ERR and SQD QP state. Enable posting to RQ in ERR QP state. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: ignore inline flag in read verbsAmrani, Ram1-1/+3
In the current implementation a read verb with IB_SEND_INLINE may be illegally configured. In this fix we ignore the inline bit in the case of a read verb. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: modify QP state to error when destroying itAmrani, Ram1-2/+4
Current code didn't modify the QP state to error because it queried the QP state as a bitmap while it isn't. So the code never got executed. This patch fixes this and queries for each QP state respectively and not at once via a bitmask. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: return correct value on modify qpAmrani, Ram1-1/+1
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: return error if destroy CQ failedAmrani, Ram1-1/+6
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 23:19:40 +0000