summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-04-20powerpc/64: modules support building with PCREL addresingNicholas Piggin5-35/+309
Build modules using PCREL addressing when CONFIG_PPC_KERNEL_PCREL=y. - The module loader must handle several new relocation types: * R_PPC64_REL24_NOTOC is a function call handled like R_PPC_REL24, but does not restore r2 upon return. The external function call stub is changed to use pcrel addressing to load the function pointer rather than based on the module TOC. * R_PPC64_GOT_PCREL34 is a reference to external data. A GOT table must be built by hand, because the linker adds this during the final link (which is not done for kernel modules). The GOT table is built similarly to the way the external function call stub table is. This section is called .mygot because .got has a special meaning for the linker and can become upset. * R_PPC64_PCREL34 is used for local data addressing, but there is a special case where the percpu section is moved at load-time to the percpu area which is out of range of this relocation. This requires the PCREL34 relocations are converted to use GOT_PCREL34 addressing. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Some coding style & formatting fixups] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-7-npiggin@gmail.com
2023-04-20powerpc/64: vmlinux support building with PCREL addresingNicholas Piggin19-38/+228
PC-Relative or PCREL addressing is an extension to the ELF ABI which uses Power ISA v3.1 PC-relative instructions to calculate addresses, rather than the traditional TOC scheme. Add an option to build vmlinux using pcrel addressing. Modules continue to use TOC addressing. - TOC address helpers and r2 are poisoned with -1 when running vmlinux. r2 could be used for something useful once things are ironed out. - Assembly must call C functions with @notoc annotation, or the linker complains aobut a missing nop after the call. This is done with the CFUNC macro introduced earlier. - Boot: with the exception of prom_init, the execution branches to the kernel virtual address early in boot, before any addresses are generated, which ensures 34-bit pcrel addressing does not miss the high PAGE_OFFSET bits. TOC relative addressing has a similar requirement. prom_init does not go to the virtual address and its addresses should not carry over to the post-prom kernel. - Ftrace trampolines are converted from TOC addressing to pcrel addressing, including module ftrace trampolines that currently use the kernel TOC to find ftrace target functions. - BPF function prologue and function calling generation are converted from TOC to pcrel. - copypage_64.S has an interesting problem, prefixed instructions have alignment restrictions so the linker can add padding, which makes the assembler treat the difference between two local labels as non-constant even if alignment is arranged so padding is not required. This may need toolchain help to solve nicely, for now move the prefix instruction out of the alternate patch section to work around it. This reduces kernel text size by about 6%. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-6-npiggin@gmail.com
2023-04-20powerpc: add CFUNC assembly label annotationNicholas Piggin15-103/+114
This macro is to be used in assembly where C functions are called. pcrel addressing mode requires branches to functions with a localentry value of 1 to have either a trailing nop or @notoc. This macro permits the latter without changing callers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Add dummy definitions to fix selftests build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-5-npiggin@gmail.com
2023-04-20powerpc/64: Add support to build with prefixed instructionsNicholas Piggin7-6/+112
Add an option to build kernel and module with prefixed instructions if the CPU and toolchain support it. This is not related to kernel support for userspace execution of prefixed instructions. Building with prefixed instructions breaks some extended inline asm memory addressing, for example it will provide immediates that exceed the range of simple load/store displacement. Whether this is a toolchain or a kernel asm problem remains to be seen. For now, these are replaced with simpler and less efficient direct register addressing when compiling with prefixed. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-4-npiggin@gmail.com
2023-04-20powerpc/64s: Run at the kernel virtual address earlier in bootNicholas Piggin1-38/+44
This mostly consolidates the Book3E and Book3S behaviour in boot WRT executing from the physical or virtual address. Book3E sets up kernel virtual linear map in start_initialization_book3e and runs from the virtual linear alias after that. This change makes Book3S begin to execute from the virtual alias at the same point. Book3S can not use its MMU for that at this point, but when the MMU is disabled, the virtual linear address correctly aliases to physical memory because the top bits of the address are ignored with MMU disabled. Secondaries execute from the virtual address similarly early. This reduces the differences between subarchs, but the main motivation was to enable the PC-relative addressing ABI for Book3S, where pointer calculations must execute from the virtual address or the top bits of the pointer will be lost. This is similar to the requirement the TOC relative addressing already has that the TOC pointer use its virtual address. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-3-npiggin@gmail.com
2023-04-20powerpc/64: Move initial base and TOC pointer calculationNicholas Piggin1-9/+22
A later change moves the non-prom case to run at the virtual address earlier, which calls for virtual TOC and kernel base. Split these two calculations for prom and non-prom to make that change simpler. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Retain relative_toc call for start_initialization_book3e] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-2-npiggin@gmail.com
2023-04-20powerpc: dts: turris1x.dts: Remove "fsl,P2020RDB-PC" compatible stringPali Rohár1-1/+1
"fsl,P2020RDB-PC" compatible string was present in Turris 1.x DTS file just because Linux kernel required it for proper detection of P2020 processor during boot. This was quite a hack as CZ.NIC Turris 1.x is not compatible with Freescale P2020-RDB-PC board. Now when kernel has generic unified support for boards with P2020 processors, there is no need to have this "hack" in turris1x.dts file. So remove incorrect "fsl,P2020RDB-PC" compatible string from turris1x.dts. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-14-pali@kernel.org
2023-04-20powerpc/85xx: p2020: Enable boards by new config option CONFIG_PPC_P2020Pali Rohár2-6/+21
Generic unified P2020 machine description which supports all P2020-based boards is now in separate file p2020.c. So create a separate config option CONFIG_PPC_P2020 for it. Previously machine descriptions for P2020 boards were enabled by CONFIG_MPC85xx_DS or CONFIG_MPC85xx_RDB option. So set CONFIG_PPC_P2020 to be enabled by default when one of those option is enabled. This allows to compile support for P2020 boards without need to have enabled support for older mpc85xx boards. And to compile kernel for old mpc85xx boards without having enabled support for new P2020 boards. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-13-pali@kernel.org
2023-04-20powerpc/85xx: p2020: Define just one machine descriptionPali Rohár1-38/+19
Combine machine descriptions and code of all P2020 boards into just one generic unified P2020 machine description. This allows kernel to boot on any P2020-based board with P2020 DTS file without need to patch kernel and define a new machine description in 85xx powerpc platform directory. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-12-pali@kernel.org
2023-04-20powerpc/85xx: p2020: Unify .setup_arch and .init_IRQ callbacksPali Rohár4-15/+36
Make just one .setup_arch and one .init_IRQ callback implementation for all P2020 board code. This deduplicate repeated and same code. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-11-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_ds: Move i8259 code into own filePali Rohár4-47/+72
In order to share mpc85xx i8259 code between DS and P2020. Prefix i8259 debug and error messages by i8259 word. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Fix some coding style warnings in the moved code] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-10-pali@kernel.org
2023-04-20powerpc/85xx: p2020: Move all P2020 RDB machine descriptions to p2020.cPali Rohár4-30/+37
This moves P2020 RDB machine descriptions into new p2020.c source file. This is preparation for code de-duplication and providing one unified machine description for all P2020 boards. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-9-pali@kernel.org
2023-04-20powerpc/85xx: p2020: Move all P2020 DS machine descriptions to p2020.cPali Rohár4-16/+46
This moves P2020 DS machine descriptions into new p2020.c source file. This is preparation for code de-duplication and providing one unified machine description for all P2020 boards. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-8-pali@kernel.org
2023-04-20powerpc/85xx: Remove #ifdef CONFIG_QUICC_ENGINE in mpc85xx_rdbChristophe Leroy1-2/+0
mpc85xx_qe_par_io_init() is a stub when CONFIG_QUICC_ENGINE is not set. CONFIG_UCC_GETH and CONFIG_SERIAL_QE depend on CONFIG_QUICC_ENGINE. Remove #ifdef CONFIG_QUICC_ENGINE Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-7-pali@kernel.org
2023-04-20powerpc/85xx: Remove #ifdefs CONFIG_PPC_I8259 in mpc85xx_dsChristophe Leroy1-17/+20
All necessary items are declared all the time, no need to use a #ifdef CONFIG_PPC_I8259. Refactor CONFIG_PPC_I8259 actions into a dedicated init function. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-6-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_{ds/rdb} replace prink by pr_xxx macroChristophe Leroy2-4/+4
Use pr_debug() instead of printk(KERN_DEBUG Use pr_err() instead of printk(KERN_ERR Use pr_info() instead of printk(KERN_INFO or printk(" Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-5-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_{ds/rdb} replace BUG_ON() by WARN_ON()Christophe Leroy2-2/+6
No need to BUG() in case mpic_alloc() fails. Use WARN_ON(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-4-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_{ds/rdb} compact the call to mpic_alloc()Christophe Leroy2-23/+11
Reduce number of lines in the call to mpic_alloc(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-3-pali@kernel.org
2023-04-20powerpc/85xx: Remove DBG() macroChristophe Leroy3-25/+1
DBG() macro is defined at three places while used only one time at one place. Replace its only use by a pr_debug() and remove the macro. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-2-pali@kernel.org
2023-04-20powerpc/fsl_uli1575: Mark uli_exclude_device() as staticPali Rohár2-4/+1
Function uli_exclude_device() is not used outside of the fsl_uli1575.c source file anymore. So mark it as static and remove public prototype. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-9-pali@kernel.org
2023-04-20powerpc/86xx: mpc86xx_hpcn: Call uli_init() instead of explicit ppc_md ↵Pali Rohár1-4/+1
assignment After calling fsl_pci_assign_primary(), it is possible to use uli_init() to conditionally initialize ppc_md.pci_exclude_device callback based on the uli1575 detection. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-8-pali@kernel.org
2023-04-20powerpc/fsl_uli1575: Allow to disable FSL_ULI1575 supportPali Rohár1-1/+3
ULI1575 PCIe south bridge exists only on some Freescale boards. Allow to disable CONFIG_FSL_ULI1575 symbol when it is not explicitly selected and only implied. This is achieved by marking symbol as visible by providing short description. Also adds dependency for this symbol to prevent enabling it on platforms on which driver does not compile. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-7-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_rdb: Do not automatically select FSL_ULI1575Pali Rohár1-1/+0
Boards provided by CONFIG_MPC85xx_RDB option do not initialize fsl_uli1575.c driver. So remove explicit select dependency on it. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-6-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_ds: Move uli_init() code into its own driver filePali Rohár3-22/+22
Move uli_init() function into existing driver fsl_uli1575.c file in order to share its code between more platforms and board files. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-5-pali@kernel.org
2023-04-20powerpc/fsl_uli1575: Simplify uli_exclude_device() usagePali Rohár3-25/+5
Function uli_exclude_device() is called only from mpc86xx_exclude_device() and mpc85xx_exclude_device() functions. Both those functions are same, so merge its logic directly into the uli_exclude_device() function. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-4-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_ds: Simplify mpc85xx_exclude_device() functionPali Rohár1-3/+2
Function mpc85xx_exclude_device() is installed and used only when pci_with_uli is fsl_pci_primary. So replace check for pci_with_uli by fsl_pci_primary in mpc85xx_exclude_device() and move pci_with_uli variable declaration into function mpc85xx_ds_uli_init() where it is used. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-3-pali@kernel.org
2023-04-20powerpc/fsl_uli1575: Misc cleanupChristophe Leroy4-9/+14
Use a single line for uli_exclude_device(). Add uli_exclude_device() prototype in ppc-pci.h and guard it. Remove that prototype from mpc85xx_ds.c and mpc86xx_hpcn.c files. Make uli_pirq_to_irq[] static as it is used only in that file. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-2-pali@kernel.org
2023-04-20powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPUNicholas Piggin1-0/+2
-mcpu=power10 will generate prefixed and pcrel code by default, which we do not support. The general kernel disables these with cflags, but those were missed for the boot wrapper. Fixes: 4b2a9315f20d ("powerpc/64s: POWER10 CPU Kconfig build option") Cc: stable@vger.kernel.org # v6.1+ Reported-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230407040909.230998-1-npiggin@gmail.com
2023-04-12powerpc/boot: Fix crt0.S current address branch formNicholas Piggin1-2/+2
Use the preferred form of branch-and-link for finding the current address so objtool doesn't think it is an unannotated intra-function call. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230407040924.231023-1-npiggin@gmail.com
2023-04-11powerpc/32: Include thread_info.h in head_booke.hNathan Chancellor1-0/+1
When building with W=1 after commit 80b6093b55e3 ("kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds"), the following warning occurs. In file included from arch/powerpc/kvm/bookehv_interrupts.S:26: arch/powerpc/kvm/../kernel/head_booke.h:20:6: warning: "THREAD_SHIFT" is not defined, evaluates to 0 [-Wundef] 20 | #if (THREAD_SHIFT < 15) | ^~~~~~~~~~~~ THREAD_SHIFT is defined in thread_info.h but it is not directly included in head_booke.h, so it is possible for THREAD_SHIFT to be undefined. Add the include to ensure that THREAD_SHIFT is always defined. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/202304050954.yskLdczH-lkp@intel.com/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230406-wundef-thread_shift_booke-v1-1-8deffa4d84f9@kernel.org
2023-04-11powerpc: copy_thread don't set PPR in user interrupt frame regsNicholas Piggin1-5/+0
syscalls do not set the PPR field in their interrupt frame and return from syscall always sets the default PPR for userspace, so setting the value in the ret_from_fork frame is not necessary and mildly inconsistent. Remove it. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-9-npiggin@gmail.com
2023-04-11powerpc: copy_thread don't set _TIF_RESTOREALLNicholas Piggin2-2/+5
In the kernel user thread path, don't set _TIF_RESTOREALL because the thread is required to call kernel_execve() before it returns, which will set _TIF_RESTOREALL if necessary via start_thread(). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-8-npiggin@gmail.com
2023-04-11powerpc: differentiate kthread from user kernel thread startNicholas Piggin3-6/+39
Kernel created user threads start similarly to kernel threads in that they call a kernel function after first returning from _switch, so they share ret_from_kernel_thread for this. Kernel threads never return from that function though, whereas user threads often do (although some don't, e.g., IO threads). Split these startup functions in two, and catch kernel threads that improperly return from their function. This is intended to make the complicated code a little bit easier to understand. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-7-npiggin@gmail.com
2023-04-11powerpc: copy_thread differentiate kthreads and user mode threadsNicholas Piggin2-36/+64
When copy_thread is given a kernel function to run in arg->fn, this does not necessarily mean it is a kernel thread. User threads can be created this way (e.g., kernel_init, see also x86's copy_thread()). These threads run a kernel function which may call kernel_execve() and return, which returns like a userspace exec(2) syscall. Kernel threads are to be differentiated with PF_KTHREAD, will always have arg->fn set, and should never return from that function, instead calling kthread_exit() to exit. Create separate paths for the kthread and user kernel thread creation logic. The kthread path will never exit and does not require a user interrupt frame, so it gets a minimal stack frame. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-6-npiggin@gmail.com
2023-04-11powerpc/64: ret_from_fork avoid restoring regs twiceNicholas Piggin1-2/+2
If the system call return path always restores NVGPRs then there is no need for ret_from_fork to do it. The HANDLER_RESTORE_NVGPRS does the right thing for this. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-5-npiggin@gmail.com
2023-04-11powerpc: use switch frame for ret_from_kernel_thread parametersNicholas Piggin3-6/+9
The kernel thread path in copy_thread creates a user interrupt frame on stack and stores the function and arg parameters there, and ret_from_kernel_thread loads them. This is a slightly confusing way to overload that frame. Non-volatile registers are loaded from the switch frame, so the parameters can be stored there. The user interrupt frame is now only used by user threads when they return to user. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-4-npiggin@gmail.com
2023-04-11powerpc: copy_thread make ret_from_fork register setup consistentNicholas Piggin2-4/+1
The ret_from_fork code for 64e and 32-bit set r3 for syscall_exit_prepare the same way that 64s does, so there should be no need to special-case them in copy_thread. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-3-npiggin@gmail.com
2023-04-11powerpc: copy_thread remove unused pkey codeNicholas Piggin1-11/+1
The pkey registers (AMR, IAMR) do not get loaded from the switch frame so it is pointless to save anything there. Remove the dead code. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-2-npiggin@gmail.com
2023-04-11powerpc/64: Always build with 128-bit long doubleMichael Ellerman3-5/+2
The amdgpu driver builds some of its code with hard-float enabled, whereas the rest of the kernel is built with soft-float. When building with 64-bit long double, if soft-float and hard-float objects are linked together, the build fails due to incompatible ABI tags. In the past there have been build errors in the amdgpu driver caused by this, some of those were due to bad intermingling of soft & hard-float code, but those issues have now all been fixed since commit 58ddbecb14c7 ("drm/amd/display: move remaining FPU code to dml folder"). However it's still possible for soft & hard-float objects to end up linked together, if the amdgpu driver is built-in to the kernel along with the test_emulate_step.c code, which uses soft-float. That happens in an allyesconfig build. Currently those build errors are avoided because the amdgpu driver is gated on 128-bit long double being enabled. But that's not a detail the amdgpu driver should need to be aware of, and if another driver starts using hard-float the same problem would occur. All versions of the 64-bit ABI specify that long-double is 128-bits. However some compilers, notably the kernel.org ones, are built to use 64-bit long double by default. Apart from this issue of soft vs hard-float, the kernel doesn't care what size long double is. In particular the kernel using 128-bit long double doesn't impact userspace's ability to use 64-bit long double, as musl does. So always build the 64-bit kernel with 128-bit long double. That should avoid any build errors due to the incompatible ABI tags. Excluding the code that uses soft/hard-float, the vmlinux is identical with/without the flag. It does mean any code which is incorrectly intermingling soft & hard-float code will build without error, so those bugs will need to be caught by testing rather than at build time. For more background see: - commit d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine") - commit c653c591789b ("drm/amdgpu: Re-enable DCN for 64-bit powerpc") - https://lore.kernel.org/r/dab9cbd8-2626-4b99-8098-31fe76397d2d@app.fastmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Link: https://msgid.link/20230404102847.3303623-1-mpe@ellerman.id.au
2023-04-04powerpc/atomics: Remove unused functionNysal Jan K.A1-29/+0
Remove arch_atomic_try_cmpxchg_lock function as it is no longer used since commit 9f61521c7a28 ("powerpc/qspinlock: powerpc qspinlock implementation") Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230224103940.1328725-1-nysal@linux.ibm.com
2023-04-04powerpc: Implement arch_within_stack_framesNicholas Miehlbradt3-0/+47
Walks the stack when copy_{to,from}_user address is in the stack to ensure that the object being copied is entirely a single stack frame and does not contain stack metadata. Substantially similar to the x86 implementation. The back chain is used to traverse the stack and identify stack frame boundaries. Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230228054355.300628-1-nicholas@linux.ibm.com
2023-04-04powerpc: Use of_address_to_resource()Rob Herring9-99/+51
Replace open coded reading of "reg" or of_get_address()/ of_translate_address() calls with a single call to of_address_to_resource(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230329220337.141295-1-robh@kernel.org
2023-04-04powerpc/usbgecko: Use of_iomap()Rob Herring1-19/+1
Replace of_get_property()+of_translate_address()+ioremap() with a call to of_iomap() which does all those steps. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230327223109.820381-1-robh@kernel.org
2023-04-04powerpc/fsl_rio: Use of_iomap()Rob Herring1-20/+3
Replace of_address_to_resource()+ioremap() with a call to of_iomap() which does both of those steps. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230327223103.820229-1-robh@kernel.org
2023-04-04powerpc/xics: Use of_address_count()Rob Herring1-12/+5
icp_native_init_one_node() only needs the number of entries in "reg". Replace the open coded "reg" parsing with of_address_count() to get the number of "reg" entries. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230327223056.820086-1-robh@kernel.org
2023-04-04powerpc/isa-bridge: Remove open coded "ranges" parsingRob Herring1-129/+37
"ranges" is a standard property with common parsing functions. Users shouldn't be implementing their own parsing of it. Reimplement the ISA brige "ranges" parsing using the common ranges iterator functions. The common routines are flexible enough to work on PCI and non-PCI to ISA bridges, so refactor pci_process_ISA_OF_ranges() and isa_bridge_init_non_pci() into a single implementation. Signed-off-by: Rob Herring <robh@kernel.org> [mpe: Unsplit some strings and use pr_xxx()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230327223045.819852-1-robh@kernel.org
2023-04-04Merge branch 'topic/ppc-kvm' into nextMichael Ellerman20-114/+226
Merge our KVM topic branch to bring some KVM commits into next for wider testing.
2023-04-03KVM: PPC: Enable prefixed instructions for HV KVM and disable for PR KVMPaul Mackerras4-2/+11
Now that we can read prefixed instructions from a HV KVM guest and emulate prefixed load/store instructions to emulated MMIO locations, we can add HFSCR_PREFIXED into the set of bits that are set in the HFSCR for a HV KVM guest on POWER10, allowing the guest to use prefixed instructions. PR KVM has not yet been extended to handle prefixed instructions in all situations where we might need to emulate them, so prevent the guest from enabling prefixed instructions in the FSCR for now. Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/ZAgs25dCmLrVkBdU@cleo
2023-04-03KVM: PPC: Fetch prefixed instructions from the guestPaul Mackerras11-26/+78
In order to handle emulation of prefixed instructions in the guest, this first makes vcpu->arch.last_inst be an unsigned long, i.e. 64 bits on 64-bit platforms. For prefixed instructions, the upper 32 bits are used for the prefix and the lower 32 bits for the suffix, and both halves are byte-swapped if the guest endianness differs from the host. Next, vcpu->arch.emul_inst is now 64 bits wide, to match the HEIR register on POWER10. Like HEIR, for a prefixed instruction it is defined to have the prefix is in the top 32 bits and the suffix in the bottom 32 bits, with both halves in the correct byte order. kvmppc_get_last_inst is extended on 64-bit machines to put the prefix and suffix in the right places in the ppc_inst_t being returned. kvmppc_load_last_inst now returns the instruction in an unsigned long in the same format as vcpu->arch.last_inst. It makes the decision about whether to fetch a suffix based on the SRR1_PREFIXED bit in the MSR image stored in the vcpu struct, which generally comes from SRR1 or HSRR1 on an interrupt. This bit is defined in Power ISA v3.1B to be set if the interrupt occurred due to a prefixed instruction and cleared otherwise for all interrupts except for instruction storage interrupt, which does not come to the hypervisor. It is set to zero for asynchronous interrupts such as external interrupts. In previous ISA versions it was always set to 0 for all interrupts except instruction storage interrupt. The code in book3s_hv_rmhandlers.S that loads the faulting instruction on a HDSI is only used on POWER8 and therefore doesn't ever need to load a suffix. [npiggin@gmail.com - check that the is-prefixed bit in SRR1 matches the type of instruction that was fetched.] Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/ZAgsq9h1CCzouQuV@cleo
2023-04-03KVM: PPC: Make kvmppc_get_last_inst() produce a ppc_inst_tPaul Mackerras9-31/+47
This changes kvmppc_get_last_inst() so that the instruction it fetches is returned in a ppc_inst_t variable rather than a u32. This will allow us to return a 64-bit prefixed instruction on those 64-bit machines that implement Power ISA v3.1 or later, such as POWER10. On 32-bit platforms, ppc_inst_t is 32 bits wide, and is turned back into a u32 by ppc_inst_val, which is an identity operation on those platforms. Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/ZAgsiPlL9O7KnlZZ@cleo
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 13:39:16 +0000