summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-11-15Merge tag 'mailbox-v4.15' of ↵Linus Torvalds6-28/+66
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "Change to POLL api and fixes for FlexRM and OMAP driver. Summary: - Core: Prefer ACK method over POLL, if both supported - Test: use flag instead of special character - FlexRM: Usual driver internal minor churn - Omap: fix error path" * tag 'mailbox-v4.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox/omap: unregister mbox class mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone mailbox: Build Broadcom FlexRM driver as loadable module for iProc SOCs mailbox: bcm-flexrm-mailbox: Use common GPL comment header mailbox: bcm-flexrm-mailbox: add depends on ARCH_BCM_IPROC mailbox: bcm-flexrm-mailbox: Print ring number in errors and warnings mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence
2017-11-15Merge tag 'for-v4.15' of ↵Linus Torvalds6-9/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - misc minor fixes * tag 'for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: cpcap-charger: fix incorrect return value check power: supply: replace pr_* with dev_* power: supply: pcf50633-charger: remove redundant variable charging_start power: supply: generic-adc-battery: remove redundant variable pdata power: supply: max8997: Improve a size determination in probe
2017-11-15Merge tag 'hsi-for-4.15' of ↵Linus Torvalds3-8/+15
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: - add HSI OMAP4 bindings - misc small fixes * tag 'hsi-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: dt-bindings: hsi: add omap4 hsi controller bindings HSI: hsi_char: pr_err() strings should end with newlines HSI: omap_ssi_core: fix kilo to be "k" not "K"
2017-11-15Merge tag 'selinux-pr-20171113' of ↵Linus Torvalds5-36/+47
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux updates from Paul Moore: "Seven SELinux patches for v4.15, although five of the seven are small build fixes and cleanups. Of the remaining two patches, the only one worth really calling out is Eric's fix for the SELinux filesystem xattr set/remove code; the other patch simply converts the SELinux hash table implementation to use kmem_cache. Eric's setxattr/removexattr tweak converts SELinux back to calling the commoncap implementations when the xattr is not SELinux related. The immediate win is to fixup filesystem capabilities in user namespaces, but it makes things a bit saner overall; more information in the commit description" * tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: remove extraneous initialization of slots_used and max_chain_len selinux: remove redundant assignment to len selinux: remove redundant assignment to str selinux: fix build warning selinux: fix build warning by removing the unused sid variable selinux: Perform both commoncap and selinux xattr checks selinux: Use kmem_cache for hashtab_node
2017-11-15Merge tag 'audit-pr-20171113' of ↵Linus Torvalds8-65/+97
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Another relatively small pull request for audit, nine patches total. The only real new bit of functionality is the patch from Richard which adds the ability to filter records based on the filesystem type. The remainder are bug fixes and cleanups; the bug fix highlights include: - ensuring that we properly audit init/PID-1 (me) - allowing the audit daemon to shutdown the kernel/auditd connection cleanly by setting the audit PID to zero (Steve)" * tag 'audit-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: filter PATH records keyed on filesystem magic Audit: remove unused audit_log_secctx function audit: Allow auditd to set pid to 0 to end auditing audit: Add new syscalls to the perm=w filter audit: use audit_set_enabled() in audit_enable() audit: convert audit_ever_enabled to a boolean audit: don't use simple_strtol() anymore audit: initialize the audit subsystem as early as possible audit: ensure that 'audit=1' actually enables audit for PID 1
2017-11-15mm/pagewalk.c: report holes in hugetlb rangesJann Horn1-1/+5
This matters at least for the mincore syscall, which will otherwise copy uninitialized memory from the page allocator to userspace. It is probably also a correctness error for /proc/$pid/pagemap, but I haven't tested that. Removing the `walk->hugetlb_entry` condition in walk_hugetlb_range() has no effect because the caller already checks for that. This only reports holes in hugetlb ranges to callers who have specified a hugetlb_entry callback. This issue was found using an AFL-based fuzzer. v2: - don't crash on ->pte_hole==NULL (Andrew Morton) - add Cc stable (Andrew Morton) Fixes: 1e25a271c8ac ("mincore: apply page table walker on do_mincore()") Signed-off-by: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1617-26801/+91081
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-15Merge tag 'mips_4.15' of ↵Linus Torvalds72-436/+514
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.15. Fixes: - ralink: Fix MT7620 PCI build issues (4.5) - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP (4.1) - Fix MIPS64 FP save/restore on 32-bit kernels (4.0) - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19) - ralink: Fix MT7628 pinmux (3.19) - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17) - Fix n32 core dumping as o32 since regset support (3.13) - ralink: Drop obsolete USB_ARCH_HAS_HCD select Build system: - Default to "generic" (multiplatform) system type instead of IP22 - Use generic little endian MIPS32 r2 configuration as default defconfig instead of ip22_defconfig FPU emulation: - Fix exception generation for certain R6 FPU instructions SMP: - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id spaces Miscellaneous: - Add iomem resource for kernel bss section for kexec/kdump - Atomics: Nudge writes on bit unlock - DT files: Standardise "ok" -> "okay" Minor cleanups: - Define virt_to_pfn() - Make thread_saved_pc static - Simplify 32-bit sign extension in __read_64bit_c0_split() - DMA: Use vma_pages() helper - FPU emulation: Replace unsigned with unsigned int - MM: Removed unused lastpfn - Alchemy: Make clk_ops const - Lasat: Use setup_timer() helper - ralink: Use BIT() in MT7620 PCI driver Platform support: BMIPS: - Enable HARDIRQS_SW_RESEND Broadcom BCM63XX: - Add clkdev lookup support - Update clk driver, UART driver, DTs to handle named refclk from DTs - Split apart various clocks to more closely match hardware - Add ethernet clocks Cavium Octeon: - Remove usage of cvmx_wait() in favour of __delay() ImgTec Pistachio: - DT: Drop deprecated dwmmc num-slots property Ingenic JZ4780: - Add NFS root to Ci20 defconfig - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog driver with this SoC Generic (multiplatform): - Migrate xilfpga (MIPSfpga) platform to the generic platform Lantiq xway: - Fix ASC0/ASC1 clocks" * tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits) MIPS: Add iomem resource for kernel bss section. MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP MIPS: BMIPS: Enable HARDIRQS_SW_RESEND MIPS: pci: Make use of the BIT() macro inside the mt7620 driver MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver MIPS: pci: Remove duplicate define in mt7620 driver MIPS: ralink: Fix typo in mt7628 pinmux function MIPS: ralink: Fix MT7628 pinmux MIPS: Fix odd fp register warnings with MIPS64r2 watchdog: jz4780: Allow selection of jz4740-wdt driver MIPS/ptrace: Update syscall nr on register changes MIPS/ptrace: Pick up ptrace/seccomp changed syscalls MIPS: Fix an n32 core file generation regset support regression MIPS: Fix MIPS64 FP save/restore on 32-bit kernels MIPS: page.h: Define virt_to_pfn() MIPS: Xilfpga: Switch to using generic defconfigs MIPS: generic: Add support for MIPSfpga MIPS: Set defconfig target to a generic system for 32r2el MIPS: Kconfig: Set default MIPS system type as generic MIPS: DTS: Remove num-slots from Pistachio SoC ...
2017-11-15Merge tag 'arm64-upstream' of ↵Linus Torvalds97-601/+7399
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The big highlight is support for the Scalable Vector Extension (SVE) which required extensive ABI work to ensure we don't break existing applications by blowing away their signal stack with the rather large new vector context (<= 2 kbit per vector register). There's further work to be done optimising things like exception return, but the ABI is solid now. Much of the line count comes from some new PMU drivers we have, but they're pretty self-contained and I suspect we'll have more of them in future. Plenty of acronym soup here: - initial support for the Scalable Vector Extension (SVE) - improved handling for SError interrupts (required to handle RAS events) - enable GCC support for 128-bit integer types - remove kernel text addresses from backtraces and register dumps - use of WFE to implement long delay()s - ACPI IORT updates from Lorenzo Pieralisi - perf PMU driver for the Statistical Profiling Extension (SPE) - perf PMU driver for Hisilicon's system PMUs - misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits) arm64: Make ARMV8_DEPRECATED depend on SYSCTL arm64: Implement __lshrti3 library function arm64: support __int128 on gcc 5+ arm64/sve: Add documentation arm64/sve: Detect SVE and activate runtime support arm64/sve: KVM: Hide SVE from CPU features exposed to guests arm64/sve: KVM: Treat guest SVE use as undefined instruction execution arm64/sve: KVM: Prevent guests from using SVE arm64/sve: Add sysctl to set the default vector length for new processes arm64/sve: Add prctl controls for userspace vector length management arm64/sve: ptrace and ELF coredump support arm64/sve: Preserve SVE registers around EFI runtime service calls arm64/sve: Preserve SVE registers around kernel-mode NEON use arm64/sve: Probe SVE capabilities and usable vector lengths arm64: cpufeature: Move sys_caps_initialised declarations arm64/sve: Backend logic for setting the vector length arm64/sve: Signal handling support arm64/sve: Support vector length resetting for new processes arm64/sve: Core task context handling arm64/sve: Low-level CPU setup ...
2017-11-15Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of ↵Linus Torvalds114-1/+10303
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux Pull RISC-V architecture support from Palmer Dabbelt: "This contains the core RISC-V Linux port, which has been through nine rounds of review on various mailing lists. The port is not complete: there's some cleanup patches moving through the review process, a whole bunch of drivers that need some work, and a lot of feature additions that will be needed. The patches contained in this tag have been through nine rounds of review on the various mailing lists. I have some outstanding cleanup patches, but since there's been so much review on these patches I thought it would be best to submit them as-is and then submit explicit cleanup patches so everyone can review them. This first patch set is big enough that it's a bit of a pain to constantly rewrite, and it's caused a few headaches with various contributors. The port is definately a work in progress. While what's there builds and boots with 4.14, it's a bit hard to actually see anything happen because there are no device drivers yet. I maintain a staging branch that contains all the device drivers and cleanup that actually works, but those patches won't all be ready for a while. I'd like to get what we currently have into your tree so everyone can start working from a single base -- of particular importance is allowing the glibc upstreaming process to proceed so we can sort out any possibly lingering user-visible ABI problems we might have. Copied below is the ChangeLog that contains the history of this patch set: (v9) As per suggestions on our v8 patch set, I've split the core architecture code out from our drivers and would like to submit this patch set to be included into linux-next, with the goal being to be merged in during the next merge window. This patch set is based on 4.14-rc2, but if it's better to have it based on something else then I can change it around. This patch set contains just the core arch code for RISC-V, so while it builds an nominally boots, you can't print or take an interrupt so it's not that useful. If you're looking to actually boot a system it would probably be better to use the full patch set listed below. We've collected a handful of tags from reviewers, and the remainder of the patch set only got minimal feedback last time. Here's what changed: - We now use the device tree to initialize the timer driver so it's less tighly coupled with the arch port. - I cleaned up the defconfigs -- there's actually now just one, and it's empty. For now I think we're OK with what the kernel sets as defaults, but I anticipate we'll begin to expand this as people start to use the port more. - The VDSO symbols version is sane. - We WFI while spinning in the boot loop. - A handful of comments have been added. While there are still a handful of FIXMEs in this patch set, we've started to get enough interest from various users and contributors that maintaining an out of tree patch set is starting to become a big burden. Hopefully the patches are good enough to merge now, which will at least get everyone working in a more reasonable manner as we clean up the remaining issues. (v8) I know it may not be the ideal time to submit a patch set right now, as it's the middle of the merge window, but things have calmed down quite a bit in the last month so I thought it would be good to get everyone on the same page. There's been a handful of changes since the last patch set, but most of them are fairly minor: - We changed PAGE_OFFSET to allowing mapping more physical memory on 64-bit systems. This is user configurable, as it triggers a different code model that generates slightly less efficient code. - The device tree binding documentation is back, I'd managed to lose it at some point. - We now pass the atomic64 test suite - The SBI timer driver has been refactored. (v7) It's been a while since my last patch set, but the changes han been fairly minimal: - The PCI cleanup patches have been dropped, we'll do them as a separate patch set later. - We've the Kconfig entries from CONFIG_ISA_* to CONFIG_RISCV_ISA_*, to make grep easier. - There have been a handful of memory model related tweaks in I/O land, particularly relating the PCI and the upcoming platform specification. There are significant comments in the relevant files. This is still a WIP, but I think we're close to getting as good as we're going to get until we end up with some more specifications. (v6) As it's been only a day since the v5 patch set, the changes are pretty minimal: - The patch set is now based on linux-next/master, which I believe is a better base now that we're getting closer to upstream. - EARLY_PRINTK is no longer an option. Since the SBI console is reasonable, there's no penalty to enabling it (and thus no benefit to disabling it). - The mmap syscalls were refactored a bit. (v5) Things have really started to calm down, so this is fairly similar to the v4 patch set. The most interesting changes include: - We've moved back to a single patch set. - SMP support has been fixed, I was accidentally running on a non-SMP configuration. There were various mistakes all over the tree as a result of this. - The cmpxchg syscalls have been removed, as they were deemed a bad idea. As a result, RISC-V Linux systems mandate the A extension. The corresponding Kconfig entry to enable builds on non-A systems has been removed. - A few more atomic fixes: mostly fence changes, but those resulted in a handful of additional macros that were no longer necessary. - riscv_early_sie has been removed. (v4) There have only been a few changes since the v3 patch set: - The cmpxchg64 syscall is no longer enabled on 32-bit systems. It's not possible to provide this on SMP systems, and it's not necessary as glibc knows not to call it. - We provide a ELF_HWCAP so users can determine the ISA of the machine the kernel is running on. - The multi-line comments are in a better form. - There were a handful of headers that could be replaced with the asm-generic versions, and a few unnecessary definitions. - We no longer use printk, but instead use pr_*. - A few Kconfig and defconfig entries have been cleaned up. (v3) A highlight of the changes since the v2 patch set includes: - We've split out all our drivers into separate patch sets, which I've already sent out to the relevant maintainers. I haven't included those patches in this patch set, but some of them are necessary to build our port. - The patch set is now split up differently: rather than being split per directory it is split per topic. Hopefully this will make it easier to review the port on the mailing list. The split is a bit rough, so you probably still want to look at the patch set as a whole. - atomic.h has been completely rewritten and is hopefully now correct. I've attempted to sanitize the various other memory model related code as well, and I think it should all be sane now aside from a handful of FIXMEs commented in the code. - We've changed the cmpexchg syscall to always exist and to not be multiplexed. There is also a VDSO entry for compare and exchange, which allows kernels with the A extension to execute user code without the A extension reasonably fast. - Our user-visible register state now contains enough space for the Q extension for 128-bit floating point, as well as a few words to allow extensibility to future ISA extensions like the eventual V extension for vectors. - A handful of driver cleanups, but these have been split into separate patch sets now so I won't duplicate them here. (v2) A highlight of the changes since the v1 patch set includes: - We've split out our drivers into the right places, which means now there's a lot more patches. I'll be submitting these patches to various subsystem maintainers and including them in any future RISC-V patch sets until they've been merged. - The SBI console driver has been completely rewritten to use the HVC helpers and is now significantly smaller. - We've begun to use weaker barriers as opposed to just the big "fence". There's still some work to do here, specifically: - We need fences in the relaxed MMIO functions. - The non-relaxed MMIO functions are missing R/W bits on their fences. - Many AMOs need the aq and rl bits set. - We now have thread_info in task_struct. As a result, sscratch now contains TP instead of SP. This was necessary because thread_info is no longer on the stack. - A few shared routines have been added that we use instead of creating another arch copy" Reviewed-by: Arnd Bergmann <arnd@arndb.de> * tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux: RISC-V: Build Infrastructure RISC-V: User-facing API RISC-V: Paging and MMU RISC-V: Device, timer, IRQs, and the SBI RISC-V: Task implementation RISC-V: ELF and module implementation RISC-V: Generic library routines and assembly RISC-V: Atomic and Locking Code RISC-V: Init and Halt Code dt-bindings: RISC-V CPU Bindings lib: Add shared copies of some GCC library routines MAINTAINERS: Add RISC-V
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds17-21/+2162
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching updates from Jiri Kosina: - shadow variables support, allowing livepatches to associate new "shadow" fields to existing data structures, from Joe Lawrence - pre/post patch callbacks API, allowing livepatch writers to register callbacks to be called before and after patch application, from Joe Lawrence * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: __klp_disable_patch() should never be called for disabled patches livepatch: Correctly call klp_post_unpatch_callback() in error paths livepatch: add transition notices livepatch: move transition "complete" notice into klp_complete_transition() livepatch: add (un)patch callbacks livepatch: Small shadow variable documentation fixes livepatch: __klp_shadow_get_or_alloc() is local to shadow.c livepatch: introduce shadow variable API
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds26-46/+62
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds22-149/+608
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - high resolution mode for Dell canvas support, from Benjamin Tissoires - pen handling fixes for the Wacom driver, from Jason Gerecke - i2c-hid: Apollo-Lake based laptops improvements, from Hans de Goede - Input/Core: eraser tool support, from Ping Cheng - new ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook Stduio and HP Elite book x360) supportm from Masaki Ota - other smaller assorted fixes * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits) HID: cp2112: fix broken gpio_direction_input callback HID: cp2112: fix interface specification URL HID: Wacom: switch Dell canvas into highres mode HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set HID: sony: Fix SHANWAN pad rumbling on USB HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device HID: add backlight level quirk for Asus ROG laptops HID: cp2112: add HIDRAW dependency HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel HID: hid-logitech: remove redundant assignment to pointer value HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection HID: rmi: Check that a device is a RMI device before calling RMI functions HID: add multi-input quirk for GamepadBlock HID: alps: add new U1 device ID HID: alps: add support for Alps T4 Touchpad device HID: alps: remove variables local to u1_init() from the device struct HID: alps: properly handle max_fingers and minimum on X and Y axis HID: alps: Separate U1 device code HID: alps: delete unnecessary struct u1_dev devInfo HID: usbhid: Convert timers to use timer_setup() ...
2017-11-15tcp: highest_sack fixEric Dumazet2-15/+4
syzbot easily found a regression added in our latest patches [1] No longer set tp->highest_sack to the head of the send queue since this is not logical and error prone. Only sack processing should maintain the pointer to an skb from rtx queue. We might in the future only remember the sequence instead of a pointer to skb, since rb-tree should allow a fast lookup. [1] BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1706 [inline] BUG: KASAN: use-after-free in tcp_ack+0x42bb/0x4fd0 net/ipv4/tcp_input.c:3537 Read of size 4 at addr ffff8801c154faa8 by task syz-executor4/12860 CPU: 0 PID: 12860 Comm: syz-executor4 Not tainted 4.14.0-next-20171113+ #41 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429 tcp_highest_sack_seq include/net/tcp.h:1706 [inline] tcp_ack+0x42bb/0x4fd0 net/ipv4/tcp_input.c:3537 tcp_rcv_established+0x672/0x18a0 net/ipv4/tcp_input.c:5439 tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1468 sk_backlog_rcv include/net/sock.h:909 [inline] __release_sock+0x124/0x360 net/core/sock.c:2264 release_sock+0xa4/0x2a0 net/core/sock.c:2778 tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:632 [inline] sock_sendmsg+0xca/0x110 net/socket.c:642 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2048 __sys_sendmsg+0xe5/0x210 net/socket.c:2082 SYSC_sendmsg net/socket.c:2093 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2089 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x452879 RSP: 002b:00007fc9761bfbe8 EFLAGS: 00000212 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452879 RDX: 0000000000000000 RSI: 0000000020917fc8 RDI: 0000000000000015 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: 00000000006ee3a0 R13: 00000000ffffffff R14: 00007fc9761c06d4 R15: 0000000000000000 Allocated by task 12860: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc_node+0x144/0x760 mm/slab.c:3638 __alloc_skb+0xf1/0x780 net/core/skbuff.c:193 alloc_skb_fclone include/linux/skbuff.h:1023 [inline] sk_stream_alloc_skb+0x11d/0x900 net/ipv4/tcp.c:870 tcp_sendmsg_locked+0x1341/0x3b80 net/ipv4/tcp.c:1299 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1461 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:632 [inline] sock_sendmsg+0xca/0x110 net/socket.c:642 SYSC_sendto+0x358/0x5a0 net/socket.c:1749 SyS_sendto+0x40/0x50 net/socket.c:1717 entry_SYSCALL_64_fastpath+0x1f/0x96 Freed by task 12860: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3492 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3750 kfree_skbmem+0xdd/0x1d0 net/core/skbuff.c:603 __kfree_skb+0x1d/0x20 net/core/skbuff.c:642 sk_wmem_free_skb include/net/sock.h:1419 [inline] tcp_rtx_queue_unlink_and_free include/net/tcp.h:1682 [inline] tcp_clean_rtx_queue net/ipv4/tcp_input.c:3111 [inline] tcp_ack+0x1b17/0x4fd0 net/ipv4/tcp_input.c:3593 tcp_rcv_established+0x672/0x18a0 net/ipv4/tcp_input.c:5439 tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1468 sk_backlog_rcv include/net/sock.h:909 [inline] __release_sock+0x124/0x360 net/core/sock.c:2264 release_sock+0xa4/0x2a0 net/core/sock.c:2778 tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:632 [inline] sock_sendmsg+0xca/0x110 net/socket.c:642 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2048 __sys_sendmsg+0xe5/0x210 net/socket.c:2082 SYSC_sendmsg net/socket.c:2093 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2089 entry_SYSCALL_64_fastpath+0x1f/0x96 The buggy address belongs to the object at ffff8801c154fa80 which belongs to the cache skbuff_fclone_cache of size 456 The buggy address is located 40 bytes inside of 456-byte region [ffff8801c154fa80, ffff8801c154fc48) The buggy address belongs to the page: page:ffffea00070553c0 count:1 mapcount:0 mapping:ffff8801c154f080 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffff8801c154f080 0000000000000000 0000000100000006 raw: ffffea00070a5a20 ffffea0006a18360 ffff8801d9ca0500 0000000000000000 page dumped because: kasan: bad access detected Fixes: 737ff314563c ("tcp: use sequence distance to detect reordering") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15geneve: fix fill_info when link downHangbin Liu1-14/+10
geneve->sock4/6 were added with geneve_open and released with geneve_stop. So when geneve link down, we will not able to show remote address and checksum info after commit 11387fe4a98 ("geneve: fix fill_info when using collect_metadata"). Fix this by avoid passing *_REMOTE{,6} for COLLECT_METADATA since they are mutually exclusive, and always show UDP_ZERO_CSUM6_RX info. Fixes: 11387fe4a98 ("geneve: fix fill_info when using collect_metadata") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15bpf: fix lockdep splatEric Dumazet1-2/+6
pcpu_freelist_pop() needs the same lockdep awareness than pcpu_freelist_populate() to avoid a false positive. [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] switchto-defaul/12508 [HC0[0]:SC0[6]:HE0:SE0] is trying to acquire: (&htab->buckets[i].lock){......}, at: [<ffffffff9dc099cb>] __htab_percpu_map_update_elem+0x1cb/0x300 and this task is already holding: (dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...}, at: [<ffffffff9e135848>] __dev_queue_xmit+0 x868/0x1240 which would create a new lock dependency: (dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...} -> (&htab->buckets[i].lock){......} but this new dependency connects a SOFTIRQ-irq-safe lock: (dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...} ... which became SOFTIRQ-irq-safe at: [<ffffffff9db5931b>] __lock_acquire+0x42b/0x1f10 [<ffffffff9db5b32c>] lock_acquire+0xbc/0x1b0 [<ffffffff9da05e38>] _raw_spin_lock+0x38/0x50 [<ffffffff9e135848>] __dev_queue_xmit+0x868/0x1240 [<ffffffff9e136240>] dev_queue_xmit+0x10/0x20 [<ffffffff9e1965d9>] ip_finish_output2+0x439/0x590 [<ffffffff9e197410>] ip_finish_output+0x150/0x2f0 [<ffffffff9e19886d>] ip_output+0x7d/0x260 [<ffffffff9e19789e>] ip_local_out+0x5e/0xe0 [<ffffffff9e197b25>] ip_queue_xmit+0x205/0x620 [<ffffffff9e1b8398>] tcp_transmit_skb+0x5a8/0xcb0 [<ffffffff9e1ba152>] tcp_write_xmit+0x242/0x1070 [<ffffffff9e1baffc>] __tcp_push_pending_frames+0x3c/0xf0 [<ffffffff9e1b3472>] tcp_rcv_established+0x312/0x700 [<ffffffff9e1c1acc>] tcp_v4_do_rcv+0x11c/0x200 [<ffffffff9e1c3dc2>] tcp_v4_rcv+0xaa2/0xc30 [<ffffffff9e191107>] ip_local_deliver_finish+0xa7/0x240 [<ffffffff9e191a36>] ip_local_deliver+0x66/0x200 [<ffffffff9e19137d>] ip_rcv_finish+0xdd/0x560 [<ffffffff9e191e65>] ip_rcv+0x295/0x510 [<ffffffff9e12ff88>] __netif_receive_skb_core+0x988/0x1020 [<ffffffff9e130641>] __netif_receive_skb+0x21/0x70 [<ffffffff9e1306ff>] process_backlog+0x6f/0x230 [<ffffffff9e132129>] net_rx_action+0x229/0x420 [<ffffffff9da07ee8>] __do_softirq+0xd8/0x43d [<ffffffff9e282bcc>] do_softirq_own_stack+0x1c/0x30 [<ffffffff9dafc2f5>] do_softirq+0x55/0x60 [<ffffffff9dafc3a8>] __local_bh_enable_ip+0xa8/0xb0 [<ffffffff9db4c727>] cpu_startup_entry+0x1c7/0x500 [<ffffffff9daab333>] start_secondary+0x113/0x140 to a SOFTIRQ-irq-unsafe lock: (&head->lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [<ffffffff9db5971f>] __lock_acquire+0x82f/0x1f10 [<ffffffff9db5b32c>] lock_acquire+0xbc/0x1b0 [<ffffffff9da05e38>] _raw_spin_lock+0x38/0x50 [<ffffffff9dc0b7fa>] pcpu_freelist_pop+0x7a/0xb0 [<ffffffff9dc08b2c>] htab_map_alloc+0x50c/0x5f0 [<ffffffff9dc00dc5>] SyS_bpf+0x265/0x1200 [<ffffffff9e28195f>] entry_SYSCALL_64_fastpath+0x12/0x17 other info that might help us debug this: Chain exists of: dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2 --> &htab->buckets[i].lock --> &head->lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&head->lock); local_irq_disable(); lock(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2); lock(&htab->buckets[i].lock); <Interrupt> lock(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2); *** DEADLOCK *** Fixes: e19494edab82 ("bpf: introduce percpu_freelist") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15net: cdc_ncm: GetNtbFormat endian fixBjørn Mork1-2/+2
The GetNtbFormat and SetNtbFormat requests operate on 16 bit little endian values. We get away with ignoring this most of the time, because we only care about USB_CDC_NCM_NTB16_FORMAT which is 0x0000. This fails for USB_CDC_NCM_NTB32_FORMAT. Fix comparison between LE value from device and constant by converting the constant to LE. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: 2b02c20ce0c2 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Cc: Enrico Mioso <mrkiko.rs@gmail.com> Cc: Christian Panton <christian@panton.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-By: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15Merge branch 'for-4.15/wacom' into for-linusJiri Kosina4-15/+39
- High resolution mode for DEll canvas support, from Benjamin Tissoires - A lot of improvements to pen handling in the Wacom driver, from Jason Gerecke Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/use-timer-setup' into for-linusJiri Kosina2-8/+10
- usbhid: conversion to timer_setup() and from_timer() from Kees Cook Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/upstream' into for-linusJiri Kosina7-8/+29
- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski - i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede - Input/Core: add eraser tool support, from Ping Cheng - small assorted code fixes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/sony' into for-linusJiri Kosina1-4/+10
- SHANWAN PS3 rumble fix from Bastien Nocera Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/multitouch' into for-linusJiri Kosina2-0/+43
- make sure that we forward MSC_TIMESTAMP in accordance to the specification, from Nicolas Boichat Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/logitech' into for-linusJiri Kosina2-4/+4
- small code fixes for Logitech driver from Colin Ian King
2017-11-15Merge branch 'for-4.15/hyperv' into for-linusJiri Kosina1-1/+1
- trivial printk() line termination fix for HyperV
2017-11-15Merge branch 'for-4.15/asus' into for-linusJiri Kosina3-2/+32
- Asus laptop fixes (fn keys, backlight), from Mustafa Kuscu and Maxime Bellengé
2017-11-15Merge branch 'for-4.15/alps' into for-linusJiri Kosina8573-244105/+330395
- New ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook Stduio and HP Elite book x360) support from Masaki Ota
2017-11-15Merge branch 'for-4.14/upstream-fixes' into for-linusJiri Kosina6-3/+18
- Wacom: recognize PEN application collection properly, from Jason Gerecke - RMI: avoid cofusion caused by RMI functions being by mistake called on non-RMI devices, from Andrew Duggan - small device-ID-specific quirks/fixes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/callbacks' into for-linusJiri Kosina10-17/+1114
This pulls in an infrastructure/API that allows livepatch writers to register pre-patch and post-patch callbacks that allow for running a glue code necessary for finalizing the patching if necessary. Conflicts: kernel/livepatch/core.c - trivial conflict by adding a callback call into module going notifier vs. moving that code block to klp_cleanup_module_patches_limited() Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/shadow-variables' into for-linusJiri Kosina9-4/+1048
Shadow variables allow callers to associate new shadow fields to existing data structures. This is intended to be used by livepatch modules seeking to emulate additions to data structure definitions.
2017-11-15openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_startGustavo A. R. Silva1-1/+1
It seems that the intention of the code is to null check the value returned by function genlmsg_put. But the current code is null checking the address of the pointer that holds the value returned by genlmsg_put. Fix this by properly null checking the value returned by function genlmsg_put in order to avoid a pontential null pointer dereference. Addresses-Coverity-ID: 1461561 ("Dereference before null check") Addresses-Coverity-ID: 1461562 ("Dereference null return value") Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15Merge branch 'netem-fix-compilation-on-32-bit'David S. Miller1-10/+7
Stephen Hemminger says: ==================== netem: fix compilation on 32 bit A couple of places where 64 bit CPU was being assumed incorrectly. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15netem: remove unnecessary 64 bit modulusStephen Hemminger1-3/+3
Fix compilation on 32 bit platforms (where doing modulus operation with 64 bit requires extra glibc functions) by truncation. The jitter for table distribution is limited to a 32 bit value because random numbers are scaled as 32 bit value. Also fix some whitespace. Fixes: 99803171ef04 ("netem: add uapi to express delay and jitter in nanoseconds") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15netem: use 64 bit divide by rateStephen Hemminger1-7/+4
Since times are now expressed in nanosecond, need to now do true 64 bit divide. Old code would truncate rate at 32 bits. Rename function to better express current usage. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15tcp: Namespace-ify sysctl_tcp_default_congestion_controlStephen Hemminger7-54/+64
Make default TCP default congestion control to a per namespace value. This changes default congestion control to a pointer to congestion ops (rather than implicit as first element of available lsit). The congestion control setting of new namespaces is inherited from the current setting of the root namespace. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()Kirill Tkhai1-1/+3
There is at least unlocked deletion of net->ipv4.fib_notifier_ops from net::fib_notifier_ops: ip_fib_net_exit() rtnl_unlock() fib4_notifier_exit() fib_notifier_ops_unregister(net->ipv4.notifier_ops) list_del_rcu(&ops->list) So fib_seq_sum() can't use rtnl_lock() only for protection. The possible solution could be to use rtnl_lock() in fib_notifier_ops_unregister(), but this adds a possible delay during net namespace creation, so we better use rcu_read_lock() till someone really needs the mutex (if that happens). Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15ipv6: set all.accept_dad to 0 by defaultNicolas Dichtel1-1/+1
With commits 35e015e1f577 and a2d3f3e33853, the global 'accept_dad' flag is also taken into account (default value is 1). If either global or per-interface flag is non-zero, DAD will be enabled on a given interface. This is not backward compatible: before those patches, the user could disable DAD just by setting the per-interface flag to 0. Now, the user instead needs to set both flags to 0 to actually disable DAD. Restore the previous behaviour by setting the default for the global 'accept_dad' flag to 0. This way, DAD is still enabled by default, as per-interface flags are set to 1 on device creation, but setting them to 0 is enough to disable DAD on a given interface. - Before 35e015e1f57a7 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes X 0 no X 1 yes - After 35e015e1f577 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes 0 0 no 0 1 yes 1 0 yes - After this fix: global per-interface DAD enabled 1 1 yes 0 0 no [default] 0 1 yes 1 0 yes Fixes: 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers") Fixes: a2d3f3e33853 ("ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real") CC: Stefano Brivio <sbrivio@redhat.com> CC: Matteo Croce <mcroce@redhat.com> CC: Erik Kline <ek@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15uapi: fix linux/tls.h userspace compilation errorDmitry V. Levin2-4/+4
Move inclusion of a private kernel header <net/tcp.h> from uapi/linux/tls.h to its only user - net/tls.h, to fix the following linux/tls.h userspace compilation error: /usr/include/linux/tls.h:41:21: fatal error: net/tcp.h: No such file or directory As to this point uapi/linux/tls.h was totaly unusuable for userspace, cleanup this header file further by moving other redundant includes to net/tls.h. Fixes: 3c4d7559159b ("tls: kernel TLS support") Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15usbnet: ipheth: prevent TX queue timeouts when device not readyAlexander Kappner1-9/+21
iOS devices require the host to be "trusted" before servicing network packets. Establishing trust requires the user to confirm a dialog on the iOS device.Until trust is established, the iOS device will silently discard network packets from the host. Currently, the ipheth driver does not detect whether an iOS device has established trust with the host, and immediately sets up the transmit queues. This causes the following problems: - Kernel taint due to WARN() in netdev watchdog. - Dmesg spam ("TX timeout"). - Disruption of user space networking activity (dhcpd, etc...) when new interface comes up but cannot be used. - Unnecessary host and device wakeups and USB traffic Example dmesg output: [ 1101.319778] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out [ 1101.319817] ------------[ cut here ]------------ [ 1101.319828] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x20f/0x220 [ 1101.319831] Modules linked in: ipheth usbmon nvidia_drm(PO) nvidia_modeset(PO) nvidia(PO) iwlmvm mac80211 iwlwifi btusb btrtl btbcm btintel qmi_wwan bluetooth cfg80211 ecdh_generic thinkpad_acpi rfkill [last unloaded: ipheth] [ 1101.319861] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 4.13.12.1 #1 [ 1101.319864] Hardware name: LENOVO 20ENCTO1WW/20ENCTO1WW, BIOS N1EET62W (1.35 ) 11/10/2016 [ 1101.319867] task: ffffffff81e11500 task.stack: ffffffff81e00000 [ 1101.319873] RIP: 0010:dev_watchdog+0x20f/0x220 [ 1101.319876] RSP: 0018:ffff8810a3c03e98 EFLAGS: 00010292 [ 1101.319880] RAX: 000000000000003a RBX: 0000000000000000 RCX: 0000000000000000 [ 1101.319883] RDX: ffff8810a3c15c48 RSI: ffffffff81ccbfc2 RDI: 00000000ffffffff [ 1101.319886] RBP: ffff880c04ebc41c R08: 0000000000000000 R09: 0000000000000379 [ 1101.319889] R10: 00000100696589d0 R11: 0000000000000378 R12: ffff880c04ebc000 [ 1101.319892] R13: 0000000000000000 R14: 0000000000000001 R15: ffff880c2865fc80 [ 1101.319896] FS: 0000000000000000(0000) GS:ffff8810a3c00000(0000) knlGS:0000000000000000 [ 1101.319899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1101.319902] CR2: 00007f3ff24ac000 CR3: 0000000001e0a000 CR4: 00000000003406f0 [ 1101.319905] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1101.319908] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1101.319910] Call Trace: [ 1101.319914] <IRQ> [ 1101.319921] ? dev_graft_qdisc+0x70/0x70 [ 1101.319928] ? dev_graft_qdisc+0x70/0x70 [ 1101.319934] ? call_timer_fn+0x2e/0x170 [ 1101.319939] ? dev_graft_qdisc+0x70/0x70 [ 1101.319944] ? run_timer_softirq+0x1ea/0x440 [ 1101.319951] ? timerqueue_add+0x54/0x80 [ 1101.319956] ? enqueue_hrtimer+0x38/0xa0 [ 1101.319963] ? __do_softirq+0xed/0x2e7 [ 1101.319970] ? irq_exit+0xb4/0xc0 [ 1101.319976] ? smp_apic_timer_interrupt+0x39/0x50 [ 1101.319981] ? apic_timer_interrupt+0x8c/0xa0 [ 1101.319983] </IRQ> [ 1101.319992] ? cpuidle_enter_state+0xfa/0x2a0 [ 1101.319999] ? do_idle+0x1a3/0x1f0 [ 1101.320004] ? cpu_startup_entry+0x5f/0x70 [ 1101.320011] ? start_kernel+0x444/0x44c [ 1101.320017] ? early_idt_handler_array+0x120/0x120 [ 1101.320023] ? x86_64_start_kernel+0x145/0x154 [ 1101.320028] ? secondary_startup_64+0x9f/0x9f [ 1101.320033] Code: 20 04 00 00 eb 9f 4c 89 e7 c6 05 59 44 71 00 01 e8 a7 df fd ff 89 d9 4c 89 e6 48 c7 c7 70 b7 cd 81 48 89 c2 31 c0 e8 97 64 90 ff <0f> ff eb bf 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 [ 1101.320103] ---[ end trace 0cc4d251e2b57080 ]--- [ 1101.320110] ipheth 1-5:4.2: ipheth_tx_timeout: TX timeout The last message "TX timeout" is repeated every 5 seconds until trust is established or the device is disconnected, filling up dmesg. The proposed patch eliminates the problem by, upon connection, keeping the TX queue and carrier disabled until a packet is first received from the iOS device. This is reflected by the confirmed_pairing variable in the device structure. Only after at least one packet has been received from the iOS device, the transmit queue and carrier are brought up during the periodic device poll in ipheth_carrier_set. Because the iOS device will always send a packet immediately upon trust being established, this should not delay the interface becoming useable. To prevent failed UBRs in ipheth_rcvbulk_callback from perpetually re-enabling the queue if it was disabled, a new check is added so only successful transfers re-enable the queue, whereas failed transfers only trigger an immediate poll. This has the added benefit of removing the periodic control requests to the iOS device until trust has been established and thus should reduce wakeup events on both the host and the iOS device. Signed-off-by: Alexander Kappner <agk@godking.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15vhost_net: conditionally enable tx pollingJason Wang1-0/+2
We always poll tx for socket, this is sub optimal since this will slightly increase the waitqueue traversing time and more important, vhost could not benefit from commit 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency") even if we've stopped rx polling during handle_rx(), tx poll were still left in the waitqueue. Pktgen from a remote host to VM over mlx4 on two 2.00GHz Xeon E5-2650 shows 11.7% improvements on rx PPS. (from 1.28Mpps to 1.44Mpps) Cc: Wei Xu <wexu@redhat.com> Cc: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15uapi: fix linux/rxrpc.h userspace compilation errorsDmitry V. Levin1-5/+5
Consistently use types provided by <linux/types.h> to fix the following linux/rxrpc.h userspace compilation errors: /usr/include/linux/rxrpc.h:24:2: error: unknown type name 'u16' u16 srx_service; /* service desired */ /usr/include/linux/rxrpc.h:25:2: error: unknown type name 'u16' u16 transport_type; /* type of transport socket (SOCK_DGRAM) */ /usr/include/linux/rxrpc.h:26:2: error: unknown type name 'u16' u16 transport_len; /* length of transport address */ Use __kernel_sa_family_t instead of sa_family_t the same way as uapi/linux/in.h does, to fix the following linux/rxrpc.h userspace compilation errors: /usr/include/linux/rxrpc.h:23:2: error: unknown type name 'sa_family_t' sa_family_t srx_family; /* address family */ /usr/include/linux/rxrpc.h:28:3: error: unknown type name 'sa_family_t' sa_family_t family; /* transport address family */ Fixes: 727f8914477e ("rxrpc: Expose UAPI definitions to userspace") Cc: <stable@vger.kernel.org> # v4.14 Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds237-1439/+3136
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-14Merge tag 'leds_for_4.15rc1' of ↵Linus Torvalds14-31/+627
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - add a driver for PC Engines APU/APU2 LEDs New LED trigger: - add a system activity LED trigger LED core improvements: - replace flags bit shift with BIT() macros Convert timers to use timer_setup() in: - led-core - ledtrig-activity - ledtrig-heartbeat - ledtrig-transient LED class drivers fixes: - lp55xx: fix spelling mistake: 'cound' -> 'could' - tca6507: Remove unnecessary reg check - pca955x: Don't invert requested value in pca955x_gpio_set_value() LED documentation improvements: - update 00-INDEX file" * tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: Add driver for PC Engines APU/APU2 LEDs leds: lp55xx: fix spelling mistake: 'cound' -> 'could' leds: Convert timers to use timer_setup() Documentation: leds: Update 00-INDEX file leds: tca6507: Remove unnecessary reg check leds: ledtrig-heartbeat: Convert timers to use timer_setup() leds: Replace flags bit shift with BIT() macros leds: pca955x: Don't invert requested value in pca955x_gpio_set_value() leds: ledtrig-activity: Add a system activity LED trigger
2017-11-14Merge branch 'for-linus' of ↵Linus Torvalds55-731/+2776
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: EETI EXC3000, HiDeep, and Samsung S6SY761 - the timer API conversion (setup_timer() -> timer_setup()) - a few drivers swiytched to using managed API for creating custom device attributes - other assorted fixed and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits) Input: gamecon - mark expected switch fall-throughs Input: sidewinder - mark expected switch fall-throughs Input: spaceball - mark expected switch fall-throughs Input: uinput - unlock on allocation failure in ioctl Input: add support for the Samsung S6SY761 touchscreen Input: add support for HiDeep touchscreen Input: st1232 - remove obsolete platform device support Input: convert autorepeat timer to use timer_setup() media: ttpci: remove autorepeat handling and use timer_setup Input: cyttsp4 - avoid overflows when calculating memory sizes Input: mxs-lradc - remove redundant assignment to pointer input Input: add I2C attached EETI EXC3000 multi touch driver Input: goodix - support gt1151 touchpanel Input: ps2-gpio - actually abort probe when connected to sleeping GPIOs Input: hil_mlc - convert to using timer_setup() Input: hp_sdc - convert to using timer_setup() Input: touchsceen - convert timers to use timer_setup() Input: keyboard - convert timers to use timer_setup() Input: uinput - fold header into the driver proper Input: uinput - remove uinput_allocate_device() ...
2017-11-14Merge tag 'sound-4.15-rc1' of ↵Linus Torvalds345-44387/+9146
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There are no big surprising changes in this cycle, yet not too boring, either. The biggest change from diffstat POV is the removal of the legacy OSS driver codes that have been already disabled for a long time. This will bring a few trivial merge conflicts. As new features in ASoC side, there are two things: a new AC97 bus implementation and AMD Stony platform support. Both include the relevant changes shared with other subsystems, e.g. AC97 MFD changes and DRM AMD changes. Some other highlighted topics are: - A bunch of USB-audio drivers got the hardening against the malicious device accesses with a new helper code for endpoint sanity check - Lots of cleanups for ASoC Intel platform code, including support for their open source audio firmware - Continued ASoC core componentization works - Support for scaling MCLK with sample rate in ASoC simple-card - Stabler PCM hot-unplug capability, especially for ASoC usages" * tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits) Documentation: sound: hd-audio: notes.rst ASoC: bcm2835: Support left/right justified and DSP modes ASoC: bcm2835: Enforce full symmetry ASoC: bcm2835: Support additional samplerates up to 384kHz ASoC: bcm2835: Add support for TDM modes ASoC: add mclk-fs support to audio graph card ASoC: add mclk-fs to audio graph card binding ASoC: rt5514: work around link error ASoC: rt5514: mark PM functions as __maybe_unused ASoC: rt5663: Check the JD status in the button pushing ASoC: amd: Modified DMA transfer Mechanism for Playback ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2 ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+ ASoC: da7213: add support for DSP modes ASoC: sun8i-codec: Add a comment on the LRCK inversion ASoC: sun8i-codec: Set the BCLK divider ASoC: rt5663: Delay and retry reading rt5663 ID register ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds ASoC: cs42l56: Fix reset GPIO name in example DT binding ASoC: rt5514-spi: check irq status to schedule data copy in resume function ...
2017-11-14Merge branch 'i2c/for-4.15' of ↵Linus Torvalds70-600/+1685
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...
2017-11-14Merge tag 'gpio-v4.15-1' of ↵Linus Torvalds88-516/+3158
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...
2017-11-14Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds42-250/+71
Pull dma-mapping updates from Christoph Hellwig: - turn dma_cache_sync into a dma_map_ops instance and remove implementation that purely are dead because the architecture doesn't support noncoherent allocations - add a flag for busses that need DMA configuration (Robin Murphy) * tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: turn dma_cache_sync into a dma_map_ops method sh: make dma_cache_sync a no-op xtensa: make dma_cache_sync a no-op unicore32: make dma_cache_sync a no-op powerpc: make dma_cache_sync a no-op mn10300: make dma_cache_sync a no-op microblaze: make dma_cache_sync a no-op ia64: make dma_cache_sync a no-op frv: make dma_cache_sync a no-op x86: make dma_cache_sync a no-op floppy: consolidate the dummy fd_cacheflush definition drivers: flag buses which demand DMA configuration
2017-11-14Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds35-320/+3865
Pull dmaengine updates from Vinod Koul: "Updates for this cycle include: - new driver for Spreadtrum dma controller, ST MDMA and DMAMUX controllers - PM support for IMG MDC drivers - updates to bcm-sba-raid driver and improvements to sun6i driver - subsystem conversion for: - timers to use timer_setup() - remove usage of PCI pool API - usage of %p format specifier - minor updates to bunch of drivers" * tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits) dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type dmaengine: dmatest: warn user when dma test times out dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue" dmaengine: stm32_mdma: activate pack/unpack feature dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad MAINTAINERS: Step down from a co-maintaner of DW DMAC driver dmaengine: pch_dma: Replace PCI pool old API dmaengine: Convert timers to use timer_setup() dmaengine: sprd: Add Spreadtrum DMA driver dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller dmaengine: sun6i: Retrieve channel count/max request from devicetree dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs dmaengine: bcm-sba-raid: Use common GPL comment header dmaengine: bcm-sba-raid: Use only single mailbox channel dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock dmaengine: pl330: fix descriptor allocation fail dmaengine: rcar-dmac: use TCRB instead of TCR for residue dmaengine: sun6i: Add support for Allwinner A64 and compatibles arm64: allwinner: a64: Add devicetree binding for DMA controller ...
2017-11-14Merge tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds7-4/+157
Pull VFIO updates from Alex Williamson: - Virtualize PCI MPS and MRRS registers - Avoid soft lockups on SPAPR when clearing TCE - Broadcom FlexRM platform device support - Samples driver cleanup & type1 integer overflow fix * tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfio: vfio: platform: reset: Add Broadcom FlexRM reset module vfio/type1: silence integer overflow warning vfio-mdev/samples: make mdev_fops const and static vfio/spapr: Add cond_resched() for huge updates vfio/pci: Virtualize Maximum Read Request Size vfio/pci: Virtualize Maximum Payload Size
2017-11-14Merge tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds23-627/+983
Pull IOMMU updates from Alex Williamson: "As Joerg mentioned[1], he's out on paternity leave through the end of the year and I'm filling in for him in the interim: - Enforce MSI multiple IRQ alignment in AMD IOMMU - VT-d PASID error handling fixes - Add r8a7795 IPMMU support - Manage runtime PM links on exynos at {add,remove}_device callbacks - Fix Mediatek driver name to avoid conflict - Add terminate support to qcom fault handler - 64-bit IOVA optimizations - Simplfy IOVA domain destruction, better use of rcache, and skip anchor nodes on copy - Convert to IOMMU TLB sync API in io-pgtable-arm{-v7s} - Drop command queue lock when waiting for CMD_SYNC completion on ARM SMMU implementations supporting MSI to cacheable memory - iomu-vmsa cleanup inspired by missed IOTLB sync callbacks - Fix sleeping lock with preemption disabled for RT - Dual MMU support for TI DRA7xx DSPs - Optional flush option on IOVA allocation avoiding overhead when caller can try other options [1] https://lkml.org/lkml/2017/10/22/72" * tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfio: (54 commits) iommu/iova: Use raw_cpu_ptr() instead of get_cpu_ptr() for ->fq iommu/mediatek: Fix driver name iommu/ipmmu-vmsa: Hook up r8a7795 DT matching code iommu/ipmmu-vmsa: Allow two bit SL0 iommu/ipmmu-vmsa: Make IMBUSCTR setup optional iommu/ipmmu-vmsa: Write IMCTR twice iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE() iommu/ipmmu-vmsa: Enable multi context support iommu/ipmmu-vmsa: Add optional root device feature iommu/ipmmu-vmsa: Introduce features, break out alias iommu/ipmmu-vmsa: Unify ipmmu_ops iommu/ipmmu-vmsa: Clean up struct ipmmu_vmsa_iommu_priv iommu/ipmmu-vmsa: Simplify group allocation iommu/ipmmu-vmsa: Unify domain alloc/free iommu/ipmmu-vmsa: Fix return value check in ipmmu_find_group_dma() iommu/vt-d: Clear pasid table entry when memory unbound iommu/vt-d: Clear Page Request Overflow fault bit iommu/vt-d: Missing checks for pasid tables if allocation fails iommu/amd: Limit the IOVA page range to the specified addresses ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 04:38:45 +0000