summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-12-19mailbox: mailbox-test: add support for fasync/pollSudeep Holla1-8/+71
Currently the read operation on the message debug file returns error if there's no data ready to be read. It expects the userspace to retry if it fails. Since the mailbox response could be asynchronous, it would be good to add support to block the read until the data is available. We can also implement poll file operations so that the userspace can wait to become ready to perform any I/O. This patch implements the poll and fasync file operation callback for the test mailbox device. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Remove unnecessary void* castsRob Rice1-21/+20
Remove unnecessary void* casts in register writes. Fix two other minor formatting issues. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Simplify interrupt handler logicRob Rice1-25/+13
Earlier versions of the PDC driver registered for both transmit and receive interrupts. The hard IRQ handler had to communicate to the soft handler which interrupt(s) had occurred. The PDC driver no longer registers for tx interrupts. So there is no reason to save the intstatus. So remove the intstatus member of the PDC state. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Performance improvementsRob Rice1-36/+49
Three changes to improve performance in the PDC driver: - disable and reenable interrupts while the interrupt handler is running - update rxin and txin descriptor indexes more efficiently - group receive descriptor context into a structure and keep context in a single array rather than five to improve locality of reference Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptorsRob Rice1-12/+11
In PDC driver, it is not necessary to use iowrite32() when writing DMA descriptors to the transmit and receive rings. The ring memory is in host memory. So convert to normal assignment statements. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Convert from threaded IRQ to taskletRob Rice1-32/+25
Previously used threaded IRQs in the PDC driver to defer processing the rx DMA ring after getting an rx done interrupt. Instead, use a tasklet at normal priority for deferred processing. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Try to improve branch predictionRob Rice1-13/+13
Use likely/unlikely directives to improve branch prediction. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: streamline rx codeRob Rice1-60/+48
Remove the unnecessary rmb() from the receive path. If the rx ring has multiple messages ready, avoid reading last_rx_curr multiple times from the register. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Convert from interrupts to poll for tx doneRob Rice1-62/+145
The PDC driver is a mailbox controller. A mailbox controller can report that a mailbox message has been "transmitted" either when a tx interrupt fires or by having the mailbox framework poll. This commit converts the PDC driver to the poll method. We found that the tx interrupt happens when the descriptors are read by the SPU hw. Thus, the interrupt method does not allow more than one tx message in the PDC tx DMA ring at a time. To keep the SPU hw busy, we would like to keep the tx ring full under heavy load. With the poll method, the PDC driver responds that the previous message has been transmitted if the tx ring has space for another message. SPU request messages take a variable number of descriptors. If 15 descriptors are available, there is a good chance another message will fit. Also increased the ring size from 128 to 512 descriptors. With this change, I found the PDC driver hangs on its spinlock under heavy load. The PDC spinlock is not required; so I removed it. Calls to pdc_send_data() are already synchronized because of the channel spinlock in the mailbox framework. Other references to ring indexes should not require locking because they only written on either the tx or rx side. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: PDC driver leaves debugfs files after removalSteve Lin1-4/+2
Minor fix to ensure that debugfs stats pseudo-files are removed when driver module is unloaded. Previously, the call to debugfs_remove_recursive() was never being called since the directory was not empty, and a seg fault would occur if another process tried to access these leftover files. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Changes so mbox client can be removed / re-insertedSteve Lin1-8/+46
Ensure that DMA is disabled, and pointers reset, when changing DMA base addresses in pdc_ring_init(). This allows a mailbox client to be re-inserted after being removed. Otherwise, the DMA doesn't restart so the client hangs while being reinserted. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Use octal permissions rather than symbolicRob Rice1-1/+2
When creating the debugfs files for the PDC driver, use octal file permissions rather than symbolic file permissions. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: sti: Fix module autoload for OF registrationJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/mailbox/mailbox-sti.ko | grep alias alias: platform:mailbox-sti After this patch: $ modinfo drivers/mailbox/mailbox-sti.ko | grep alias alias: platform:mailbox-sti alias: of:N*T*Cst,stih407-mailboxC* alias: of:N*T*Cst,stih407-mailbox Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: mailbox-test: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/mailbox/mailbox-test.ko | grep alias $ After this patch: $ modinfo drivers/mailbox/mailbox-test.ko | grep alias alias: of:N*T*Cmailbox-testC* alias: of:N*T*Cmailbox-test Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-11-24Merge tag 'mmc-v4.9-rc5' of ↵Linus Torvalds3-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci-of-esdhc: Fix card detection - dw_mmc: Fix DMA error path" * tag 'mmc-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: dw_mmc: fix the error handling for dma operation mmc: sdhci-of-esdhc: fixup PRESENT_STATE read
2016-11-24Merge tag 'usb-4.9-rc7' of ↵Linus Torvalds14-75/+229
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a few small USB fixes and new device ids for 4.9-rc7. The majority of these fixes are in the musb driver, fixing a number of regressions that have been reported but took a while to resolve. The other fixes are all small ones, to resolve other reported minor issues. All have been in linux-next for a while with no reported issues" * tag 'usb-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: fix wrong parenthesis in ffs_func_req_match() phy: twl4030-usb: Fix for musb session bit based PM usb: musb: Drop pointless PM runtime code for dsps glue usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout usb: musb: Fix PM for hub disconnect usb: musb: Fix sleeping function called from invalid context for hdrc glue usb: musb: Fix broken use of static variable for multiple instances USB: serial: cp210x: add ID for the Zone DPMX usb: chipidea: move the lock initialization to core file Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad
2016-11-24Merge branch 'for-linus' of ↵Linus Torvalds5-44/+108
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - DMA-on-stack fixes for a couple drivers, from Benjamin Tissoires - small memory sanitization fix for sensor-hub driver, from Song Hongyan * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-sensor-hub: clear memory to avoid random data HID: rmi: make transfer buffers DMA capable HID: magicmouse: make transfer buffers DMA capable HID: lg: make transfer buffers DMA capable HID: cp2112: make transfer buffers DMA capable
2016-11-24init: use pr_cont() when displaying rotator during ramdisk loading.Nicolas Schichan1-1/+1
Otherwise each individual rotator char would be printed in a new line: (...) [ 0.642350] - [ 0.644374] | [ 0.646367] - (...) Signed-off-by: Nicolas Schichan <nicolas.schichan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-23Merge tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds4-13/+35
Pull NFS client bugfixes from Anna Schumaker: "Most of these fix regressions or races, but there is one patch for stable that Arnd sent me Stable bugfix: - Hide array-bounds warning Bugfixes: - Keep a reference on lock states while checking - Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state - Don't call close if the open stateid has already been cleared - Fix CLOSE rases with OPEN - Fix a regression in DELEGRETURN" * tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.x: hide array-bounds warning NFSv4.1: Keep a reference on lock states while checking NFSv4.1: Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state NFSv4: Don't call close if the open stateid has already been cleared NFSv4: Fix CLOSE races with OPEN NFSv4.1: Fix a regression in DELEGRETURN
2016-11-23Merge branch 'stable' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile bugfix from Chris Metcalf: "This fixes a bug that causes reboots after 208 days of uptime :-)" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: avoid using clocksource_cyc2ns with absolute cycle count
2016-11-23tile: avoid using clocksource_cyc2ns with absolute cycle countChris Metcalf1-2/+2
For large values of "mult" and long uptimes, the intermediate result of "cycles * mult" can overflow 64 bits. For example, the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock; we have mult = 853, and after 208.5 days, we overflow 64 bits. Since clocksource_cyc2ns() is intended to be used for relative cycle counts, not absolute cycle counts, performance is more importance than accepting a wider range of cycle values. So, just use mult_frac() directly in tile's sched_clock(). Commit 4cecf6d401a0 ("sched, x86: Avoid unnecessary overflow in sched_clock") by Salman Qazi results in essentially the same generated code for x86 as this change does for tile. In fact, a follow-on change by Salman introduced mult_frac() and switched to using it, so the C code was largely identical at that point too. Peter Zijlstra then added mul_u64_u32_shr() and switched x86 to use it. This is, in principle, better; by optimizing the 64x64->64 multiplies to be 32x32->64 multiplies we can potentially save some time. However, the compiler piplines the 64x64->64 multiplies pretty well, and the conditional branch in the generic mul_u64_u32_shr() causes some bubbles in execution, with the result that it's pretty much a wash. If tilegx provided its own implementation of mul_u64_u32_shr() without the conditional branch, we could potentially save 3 cycles, but that seems like small gain for a fair amount of additional build scaffolding; no other platform currently provides a mul_u64_u32_shr() override, and tile doesn't currently have an <asm/div64.h> header to put the override in. Additionally, gcc currently has an optimization bug that prevents it from recognizing the opportunity to use a 32x32->64 multiply, and so the result would be no better than the existing mult_frac() until such time as the compiler is fixed. For now, just using mult_frac() seems like the right answer. Cc: stable@kernel.org [v3.4+] Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
2016-11-23HID: hid-sensor-hub: clear memory to avoid random dataSong Hongyan1-0/+1
When user tried to read some fields like hysteresis from IIO sysfs on some systems, it fails. The reason is that this field is a byte field and caller of sensor_hub_get_feature() passes a buffer of 4 bytes. Here the function sensor_hub_get_feature() copies the single byte from the report to the caller buffer and returns "1" as the number of bytes copied. So caller can use the return value. But this is done by multiple callers, so if we just change the sensor_hub_get_feature so that caller buffer is initialized with 0s then we don't to change all functions. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-23HID: rmi: make transfer buffers DMA capableBenjamin Tissoires1-2/+8
Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove buffers allocated on the stack. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-23HID: magicmouse: make transfer buffers DMA capableBenjamin Tissoires1-2/+10
Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove buffers allocated on the stack. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-23HID: lg: make transfer buffers DMA capableBenjamin Tissoires1-4/+10
Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove buffers allocated on the stack. [jkosina@suse.cz: fix up second usage of hid_hw_raw_request(), spotted by 0day build bot] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-23HID: cp2112: make transfer buffers DMA capableBenjamin Tissoires1-36/+79
Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove buffers allocated on the stack. Use a spinlock to prevent concurrent accesses to the buffer. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-23Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds7-38/+50
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Six fixes for bugs that were found via fuzzing, and a trivial hw-enablement patch for AMD Family-17h CPU PMUs" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Allow only a single PMU/box within an events group perf/x86/intel: Cure bogus unwind from PEBS entries perf/x86: Restore TASK_SIZE check on frame pointer perf/core: Fix address filter parser perf/x86: Add perf support for AMD family-17h processors perf/x86/uncore: Fix crash by removing bogus event_list[] handling for SNB client uncore IMC perf/core: Do not set cpuctx->cgrp for unscheduled cgroups
2016-11-23Merge branch 'linus' of ↵Linus Torvalds2-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "The last push broke algif_hash for all shash implementations, so this is a follow-up to fix that. This also fixes a problem in the crypto scatterwalk that triggers a BUG_ON with certain debugging options due to the new vmalloced-stack code" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: scatterwalk - Remove unnecessary aliasing check in map_and_copy crypto: algif_hash - Fix result clobbering in recvmsg
2016-11-22Merge branch 'for-rc' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fix from Zhang Rui: "We only have one urgent fix this time. Commit 3105f234e0ab ("thermal/powerclamp: correct cpu support check"), which is shipped in 4.9-rc3, fixed a problem introduced by commit b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist"). But unfortunately, it broke intel_powerclamp driver module auto- loading at the same time. Thus we need this change to add back module auto-loading for 4.9" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/powerclamp: add back module device table
2016-11-22Merge tag 'scsi-fixes' of ↵Linus Torvalds2-9/+27
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two small fixes. One prevents timeouts on mpt3sas when trying to use the secure erase protocol which causes the erase protocol to be aborted. The second is a regression in a prior fix which causes all commands to abort during PCI extended error recovery, which is incorrect because PCI EEH is independent from what's happening on the FC transport" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: do not abort all commands in the adapter during EEH recovery scsi: mpt3sas: Fix secure erase premature termination
2016-11-22Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds5-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of driver fixes. The sunxi fixes are for an incorrect clk tree configuration and a bad frequency calculation. The other two are fixes for passing the wrong pointer in drivers recently converted to clk_hw style registration" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: efm32gg: Pass correct type to hw provider registration clk: berlin: Pass correct type to hw provider registration clk: sunxi: Fix M factor computation for APB1 clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent
2016-11-22NFSv4.x: hide array-bounds warningArnd Bergmann1-1/+1
A correct bugfix introduced a harmless warning that shows up with gcc-7: fs/nfs/callback.c: In function 'nfs_callback_up': fs/nfs/callback.c:214:14: error: array subscript is outside array bounds [-Werror=array-bounds] What happens here is that the 'minorversion == 0' check tells the compiler that we assume minorversion can be something other than 0, but when CONFIG_NFS_V4_1 is disabled that would be invalid and result in an out-of-bounds access. The added check for IS_ENABLED(CONFIG_NFS_V4_1) tells gcc that this really can't happen, which makes the code slightly smaller and also avoids the warning. The bugfix that introduced the warning is marked for stable backports, we want this one backported to the same releases. Fixes: 98b0f80c2396 ("NFSv4.x: Fix a refcount leak in nfs_callback_up_net") Cc: stable@vger.kernel.org # v3.7+ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-22Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds3-8/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two fixes for autogroup scheduling, for races when turning the feature on/off via /proc/sys/kernel/sched_autogroup_enabled" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/autogroup: Do not use autogroup->tg in zombie threads sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()
2016-11-22Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds10-33/+95
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - two fixes to make (very) old Intel CPUs boot reliably - fix the intel-mid driver and rename it - two KASAN false positive fixes - an FPU fix - two sysfb fixes - two build fixes related to new toolchain versions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/intel-mid: Rename platform_wdt to platform_mrfld_wdt x86/build: Build compressed x86 kernels as PIE when !CONFIG_RELOCATABLE as well x86/platform/intel-mid: Register watchdog device after SCU x86/fpu: Fix invalid FPU ptrace state after execve() x86/boot: Fail the boot if !M486 and CPUID is missing x86/traps: Ignore high word of regs->cs in early_fixup_exception() x86/dumpstack: Prevent KASAN false positive warnings x86/unwind: Prevent KASAN false positive warnings in guess unwinder x86/boot: Avoid warning for zero-filling .bss x86/sysfb: Fix lfb_size calculation x86/sysfb: Add support for 64bit EFI lfb_base
2016-11-22perf/x86/intel/uncore: Allow only a single PMU/box within an events groupPeter Zijlstra1-4/+4
Group validation expects all events to be of the same PMU; however is_uncore_pmu() is too wide, it matches _all_ uncore events, even across PMUs. This triggers failure when we group different events from different uncore PMUs, like: perf stat -vv -e '{uncore_cbox_0/config=0x0334/,uncore_qpi_0/event=1/}' -a sleep 1 Fix is_uncore_pmu() by only matching events to the box at hand. Note that generic code; ran after this step; will disallow this mixture of PMU events. Reported-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vince@deater.net> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20161118125354.GQ3117@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-22perf/x86/intel: Cure bogus unwind from PEBS entriesPeter Zijlstra2-13/+24
Vince Weaver reported that perf_fuzzer + KASAN detects that PEBS event unwinds sometimes do 'weird' things. In particular, we seemed to be ending up unwinding from random places on the NMI stack. While it was somewhat expected that the event record BP,SP would not match the interrupt BP,SP in that the interrupt is strictly later than the record event, it was overlooked that it could be on an already overwritten stack. Therefore, don't copy the recorded BP,SP over the interrupted BP,SP when we need stack unwinds. Note that its still possible the unwind doesn't full match the actual event, as its entirely possible to have done an (I)RET between record and interrupt, but on average it should still point in the general direction of where the event came from. Also, it's the best we can do, considering. The particular scenario that triggered the bogus NMI stack unwind was a PEBS event with very short period, upon enabling the event at the tail of the PMI handler (FREEZE_ON_PMI is not used), it instantly triggers a record (while still on the NMI stack) which in turn triggers the next PMI. This then causes back-to-back NMIs and we'll try and unwind the stack-frame from the last NMI, which obviously is now overwritten by our own. Analyzed-by: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davej@codemonkey.org.uk <davej@codemonkey.org.uk> Cc: dvyukov@google.com <dvyukov@google.com> Cc: stable@vger.kernel.org Fixes: ca037701a025 ("perf, x86: Add PEBS infrastructure") Link: http://lkml.kernel.org/r/20161117171731.GV3157@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-22perf/x86: Restore TASK_SIZE check on frame pointerJohannes Weiner1-8/+2
The following commit: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses") ... switched from copy_from_user_nmi() to __copy_from_user_nmi() with a manual access_ok() check. Unfortunately, copy_from_user_nmi() does an explicit check against TASK_SIZE, whereas the access_ok() uses whatever the current address limit of the task is. We are getting NMIs when __probe_kernel_read() has switched to KERNEL_DS, and then see vmalloc faults when we access what looks like pointers into vmalloc space: [] WARNING: CPU: 3 PID: 3685731 at arch/x86/mm/fault.c:435 vmalloc_fault+0x289/0x290 [] CPU: 3 PID: 3685731 Comm: sh Tainted: G W 4.6.0-5_fbk1_223_gdbf0f40 #1 [] Call Trace: [] <NMI> [<ffffffff814717d1>] dump_stack+0x4d/0x6c [] [<ffffffff81076e43>] __warn+0xd3/0xf0 [] [<ffffffff81076f2d>] warn_slowpath_null+0x1d/0x20 [] [<ffffffff8104a899>] vmalloc_fault+0x289/0x290 [] [<ffffffff8104b5a0>] __do_page_fault+0x330/0x490 [] [<ffffffff8104b70c>] do_page_fault+0xc/0x10 [] [<ffffffff81794e82>] page_fault+0x22/0x30 [] [<ffffffff81006280>] ? perf_callchain_user+0x100/0x2a0 [] [<ffffffff8115124f>] get_perf_callchain+0x17f/0x190 [] [<ffffffff811512c7>] perf_callchain+0x67/0x80 [] [<ffffffff8114e750>] perf_prepare_sample+0x2a0/0x370 [] [<ffffffff8114e840>] perf_event_output+0x20/0x60 [] [<ffffffff8114aee7>] ? perf_event_update_userpage+0xc7/0x130 [] [<ffffffff8114ea01>] __perf_event_overflow+0x181/0x1d0 [] [<ffffffff8114f484>] perf_event_overflow+0x14/0x20 [] [<ffffffff8100a6e3>] intel_pmu_handle_irq+0x1d3/0x490 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff81197191>] ? vunmap_page_range+0x1a1/0x2f0 [] [<ffffffff811972f1>] ? unmap_kernel_range_noflush+0x11/0x20 [] [<ffffffff814f2056>] ? ghes_copy_tofrom_phys+0x116/0x1f0 [] [<ffffffff81040d1d>] ? x2apic_send_IPI_self+0x1d/0x20 [] [<ffffffff8100411d>] perf_event_nmi_handler+0x2d/0x50 [] [<ffffffff8101ea31>] nmi_handle+0x61/0x110 [] [<ffffffff8101ef94>] default_do_nmi+0x44/0x110 [] [<ffffffff8101f13b>] do_nmi+0xdb/0x150 [] [<ffffffff81795187>] end_repeat_nmi+0x1a/0x1e [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] <<EOE>> <IRQ> [<ffffffff8115d05e>] ? __probe_kernel_read+0x3e/0xa0 Fix this by moving the valid_user_frame() check to before the uaccess that loads the return address and the pointer to the next frame. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Fixes: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-22sched/autogroup: Do not use autogroup->tg in zombie threadsOleg Nesterov3-0/+22
Exactly because for_each_thread() in autogroup_move_group() can't see it and update its ->sched_task_group before _put() and possibly free(). So the exiting task needs another sched_move_task() before exit_notify() and we need to re-introduce the PF_EXITING (or similar) check removed by the previous change for another reason. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hartsjc@redhat.com Cc: vbendel@redhat.com Cc: vlovejoy@redhat.com Link: http://lkml.kernel.org/r/20161114184612.GA15968@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-22sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()Oleg Nesterov1-11/+12
The PF_EXITING check in task_wants_autogroup() is no longer needed. Remove it, but see the next patch. However the comment is correct in that autogroup_move_group() must always change task_group() for every thread so the sysctl_ check is very wrong; we can race with cgroups and even sys_setsid() is not safe because a task running with task_group() == ag->tg must participate in refcounting: int main(void) { int sctl = open("/proc/sys/kernel/sched_autogroup_enabled", O_WRONLY); assert(sctl > 0); if (fork()) { wait(NULL); // destroy the child's ag/tg pause(); } assert(pwrite(sctl, "1\n", 2, 0) == 2); assert(setsid() > 0); if (fork()) pause(); kill(getppid(), SIGKILL); sleep(1); // The child has gone, the grandchild runs with kref == 1 assert(pwrite(sctl, "0\n", 2, 0) == 2); assert(setsid() > 0); // runs with the freed ag/tg for (;;) sleep(1); return 0; } crashes the kernel. It doesn't really need sleep(1), it doesn't matter if autogroup_move_group() actually frees the task_group or this happens later. Reported-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hartsjc@redhat.com Cc: vbendel@redhat.com Link: http://lkml.kernel.org/r/20161114184609.GA15965@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-22crypto: scatterwalk - Remove unnecessary aliasing check in map_and_copyHerbert Xu1-4/+0
The aliasing check in map_and_copy is no longer necessary because the IPsec ESP code no longer provides an IV that points into the actual request data. As this check is now triggering BUG checks due to the vmalloced stack code, I'm removing it. Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-22crypto: algif_hash - Fix result clobbering in recvmsgHerbert Xu1-1/+1
Recently an init call was added to hash_recvmsg so as to reset the hash state in case a sendmsg call was never made. Unfortunately this ended up clobbering the result if the previous sendmsg was done with a MSG_MORE flag. This patch fixes it by excluding that case when we make the init call. Fixes: a8348bca2944 ("algif_hash - Fix NULL hash crash with shash") Reported-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-21Merge branch 'for-linus' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull apparmor bugfix from James Morris: "This has a fix for a policy replacement bug that is fairly serious for apache mod_apparmor users, as it results in the wrong policy being applied on an network facing service" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: apparmor: fix change_hat not finding hat after policy replacement
2016-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds17-83/+948
Pull sparc fixes from David Miller: 1) With modern networking cards we can run out of 32-bit DMA space, so support 64-bit DMA addressing when possible on sparc64. From Dave Tushar. 2) Some signal frame validation checks are inverted on sparc32, fix from Andreas Larsson. 3) Lockdep tables can get too large in some circumstances on sparc64, add a way to adjust the size a bit. From Babu Moger. 4) Fix NUMA node probing on some sun4v systems, from Thomas Tai. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: drop duplicate header scatterlist.h lockdep: Limit static allocations if PROVE_LOCKING_SMALL is defined config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc sunbmac: Fix compiler warning sunqe: Fix compiler warnings sparc64: Enable 64-bit DMA sparc64: Enable sun4v dma ops to use IOMMU v2 APIs sparc64: Bind PCIe devices to use IOMMU v2 service sparc64: Initialize iommu_map_table and iommu_pool sparc64: Add ATU (new IOMMU) support sparc64: Add FORCE_MAX_ZONEORDER and default to 13 sparc64: fix compile warning section mismatch in find_node() sparc32: Fix inverted invalid_frame_pointer checks on sigreturns sparc64: Fix find_node warning if numa node cannot be found
2016-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds63-560/+1020
Pull networking fixes from David Miller: 1) Clear congestion control state when changing algorithms on an existing socket, from Florian Westphal. 2) Fix register bit values in altr_tse_pcs portion of stmmac driver, from Jia Jie Ho. 3) Fix PTP handling in stammc driver for GMAC4, from Giuseppe CAVALLARO. 4) Fix udplite multicast delivery handling, it ignores the udp_table parameter passed into the lookups, from Pablo Neira Ayuso. 5) Synchronize the space estimated by rtnl_vfinfo_size and the space actually used by rtnl_fill_vfinfo. From Sabrina Dubroca. 6) Fix memory leak in fib_info when splitting nodes, from Alexander Duyck. 7) If a driver does a napi_hash_del() explicitily and not via netif_napi_del(), it must perform RCU synchronization as needed. Fix this in virtio-net and bnxt drivers, from Eric Dumazet. 8) Likewise, it is not necessary to invoke napi_hash_del() is we are also doing neif_napi_del() in the same code path. Remove such calls from be2net and cxgb4 drivers, also from Eric Dumazet. 9) Don't allocate an ID in peernet2id_alloc() if the netns is dead, from WANG Cong. 10) Fix OF node and device struct leaks in of_mdio, from Johan Hovold. 11) We cannot cache routes in ip6_tunnel when using inherited traffic classes, from Paolo Abeni. 12) Fix several crashes and leaks in cpsw driver, from Johan Hovold. 13) Splice operations cannot use freezable blocking calls in AF_UNIX, from WANG Cong. 14) Link dump filtering by master device and kind support added an error in loop index updates during the dump if we actually do filter, fix from Zhang Shengju. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) tcp: zero ca_priv area when switching cc algorithms net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoC tipc: eliminate obsolete socket locking policy description rtnl: fix the loop index update error in rtnl_dump_ifinfo() l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind() net: macb: add check for dma mapping error in start_xmit() rtnetlink: fix FDB size computation netns: fix get_net_ns_by_fd(int pid) typo af_unix: conditionally use freezable blocking calls in read net: ethernet: ti: cpsw: fix fixed-link phy probe deferral net: ethernet: ti: cpsw: add missing sanity check net: ethernet: ti: cpsw: fix secondary-emac probe error path net: ethernet: ti: cpsw: fix of_node and phydev leaks net: ethernet: ti: cpsw: fix deferred probe net: ethernet: ti: cpsw: fix mdio device reference leak net: ethernet: ti: cpsw: fix bad register access in probe error path net: sky2: Fix shutdown crash cfg80211: limit scan results cache size net sched filters: pass netlink message flags in event notification ...
2016-11-21tcp: zero ca_priv area when switching cc algorithmsFlorian Westphal1-1/+3
We need to zero out the private data area when application switches connection to different algorithm (TCP_CONGESTION setsockopt). When congestion ops get assigned at connect time everything is already zeroed because sk_alloc uses GFP_ZERO flag. But in the setsockopt case this contains whatever previous cc placed there. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmitGao Feng1-1/+1
The tc could return NET_XMIT_CN as one congestion notification, but it does not mean the packe is lost. Other modules like ipvlan, macvlan, and others treat NET_XMIT_CN as success too. So l2tp_eth_dev_xmit should add the NET_XMIT_CN check. Signed-off-by: Gao Feng <gfree.wind@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21NFSv4.1: Keep a reference on lock states while checkingBenjamin Coddington1-3/+15
While walking the list of lock_states, keep a reference on each nfs4_lock_state to be checked, otherwise the lock state could be removed while the check performs TEST_STATEID and possible FREE_STATEID. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-21ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoCPeter Robinson1-1/+1
There's not much point, except compile test, enabling the stmmac platform drivers unless the STM32 SoC is enabled. It's not useful without it. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21thermal/powerclamp: add back module device tableJacob Pan1-1/+8
Commit 3105f234e0aba43e44e277c20f9b32ee8add43d4 replaced module cpu id table with a cpu feature check, which is logically correct. But we need the module device table to allow module auto loading. Cc: stable@vger.kernel.org # 4.8 Fixes:3105f234 thermal/powerclamp: correct cpu support check Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-11-21perf/core: Fix address filter parserAlexander Shishkin1-0/+2
The token table passed into match_token() must be null-terminated, which it currently is not in the perf's address filter string parser, as caught by Vince's perf_fuzzer and KASAN. It doesn't blow up otherwise because of the alignment padding of the table to the next element in the .rodata, which is luck. Fixing by adding a null-terminator to the token table. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dvyukov@google.com Cc: stable@vger.kernel.org # v4.7+ Fixes: 375637bc524 ("perf/core: Introduce address range filtering") Link: http://lkml.kernel.org/r/877f81f264.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 19:58:59 +0000