| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When alignment handling is delegated to the kernel, everything must be
word-aligned in purgatory, since the trap handler is then set to the
kexec one. Without the alignment, hitting the exception would
ultimately crash. On other occasions, the kernel's handler would take
care of exceptions.
This has been tested on a JH7110 SoC with oreboot and its SBI delegating
unaligned access exceptions and the kernel configured to handle them.
Fixes: 736e30af583fb ("RISC-V: Add purgatory")
Signed-off-by: Daniel Maslowski <cyrevolt@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240719170437.247457-1-cyrevolt@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The Linux-internal Xlinuxenvcfg ISA extension is omitted from the
riscv_isa_ext array because it has no DT binding and should not appear
in /proc/cpuinfo. The logic added in commit 625034abd52a ("riscv: add
ISA extensions validation callback") assumes all extensions are included
in riscv_isa_ext, and so riscv_resolve_isa() wrongly drops Xlinuxenvcfg
from the final ISA string. Instead, accept such Linux-internal ISA
extensions as if they have no validation callback.
Fixes: 625034abd52a ("riscv: add ISA extensions validation callback")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240718213011.2600150-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
|
|
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix ubi_init() ubiblock_exit() section mismatch
ubifs: add check for crypto_shash_tfm_digest
ubifs: Fix inconsistent inode size when powercut happens during appendant writing
ubi: block: fix null-pointer-dereference in ubiblock_create()
ubifs: fix kernel-doc warnings
ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
mtd: ubi: Restore missing cleanup on ubi_init() failure path
ubifs: dbg_orphan_check: Fix missed key type checking
ubifs: Fix unattached inode when powercut happens in creating
ubifs: Fix space leak when powercut happens in linking tmpfile
ubifs: Move ui->data initialization after initializing security
ubifs: Fix adding orphan entry twice for the same inode
ubifs: Remove insert_dead_orphan from replaying orphan process
Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
ubifs: Don't add xattr inode into orphan area
ubifs: Fix unattached xattr inode if powercut happens after deleting
mtd: ubi: avoid expensive do_div() on 32-bit machines
mtd: ubi: make ubi_class constant
ubi: eba: properly rollback inside self_check_eba
|
|
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector")
Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since ubiblock_exit() is now called from an init function,
the __exit section no longer makes sense.
Cc: Ben Hutchings <bwh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407131403.wZJpd8n2-lkp@intel.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode update from Gabriel Krisman Bertazi:
"Two small fixes to silence the compiler and static analyzers tools
from Ben Dooks and Jeff Johnson"
* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: add MODULE_DESCRIPTION() macros
unicode: make utf8 test count static
|
|
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix for potential null pointer use in init cifs
- additional dynamic trace points to improve debugging of some common
scenarios
- two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
mount parsing error)
* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace point for session setup key expired failures
smb3: add four dynamic tracepoints for copy_file_range and reflink
smb3: add dynamic tracepoint for reflink errors
cifs: mount with "unix" mount option for SMB1 incorrectly handled
cifs: fix reconnect with SMB1 UNIX Extensions
cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a syzbot issue for the msg ring cache added in this release. No
ill effects from this one, but it did make KMSAN unhappy (me)
- Sanitize the NAPI timeout handling, by unifying the value handling
into all ktime_t rather than converting back and forth (Pavel)
- Fail NAPI registration for IOPOLL rings, it's not supported (Pavel)
- Fix a theoretical issue with ring polling and cancelations (Pavel)
- Various little cleanups and fixes (Pavel)
* tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linux:
io_uring/napi: pass ktime to io_napi_adjust_timeout
io_uring/napi: use ktime in busy polling
io_uring/msg_ring: fix uninitialized use of target_req->flags
io_uring: align iowq and task request error handling
io_uring: kill REQ_F_CANCEL_SEQ
io_uring: simplify io_uring_cmd return
io_uring: fix io_match_task must_hold
io_uring: don't allow netpolling with SETUP_IOPOLL
io_uring: tighten task exit cancellations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains two fixes for this merge window:
VFS:
- I noticed that it is possible for a privileged user to mount most
filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's
namespace is recorded in fs_context->user_ns. If the returned file
descriptor is then passed to a process privileged in init_user_ns,
that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*),
creating a new superblock with sb->s_user_ns set to the namespace
of the process which called fsopen().
This is problematic as only filesystems that raise FS_USERNS_MOUNT
are known to be able to support a non-initial s_user_ns. Others may
suffer security issues, on-disk corruption or outright crash the
kernel. Prevent that by restricting such delegation to filesystems
that allow FS_USERNS_MOUNT.
Note, that this delegation requires a privileged process to
actually create the superblock so either the privileged process is
cooperaing or someone must have tricked a privileged process into
operating on a fscontext file descriptor whose origin it doesn't
know (a stupid idea).
The bug dates back to about 5 years afaict.
Misc:
- Fix hostfs parsing when the mount request comes in via the legacy
mount api.
In the legacy mount api hostfs allows to specify the host directory
mount without any key.
Restore that behavior"
* tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
hostfs: fix the host directory parse when mounting.
fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
|
|
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1]
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Cleanups
- optimization: try to avoid refing the label in apparmor_file_open
- remove useless static inline function is_deleted
- use kvfree_sensitive to free data->data
- fix typo in kernel doc
Bug fixes:
- unpack transition table if dfa is not present
- test: add MODULE_DESCRIPTION()
- take nosymfollow flag into account
- fix possible NULL pointer dereference
- fix null pointer deref when receiving skb during sock creation"
* tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: unpack transition table if dfa is not present
apparmor: try to avoid refing the label in apparmor_file_open
apparmor: test: add MODULE_DESCRIPTION()
apparmor: take nosymfollow flag into account
apparmor: fix possible NULL pointer dereference
apparmor: fix typo in kernel doc
apparmor: remove useless static inline function is_deleted
apparmor: use kvfree_sensitive to free data->data
apparmor: Fix null pointer deref when receiving skb during sock creation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Jann Horn reported a sandbox bypass for Landlock. This includes the
fix and new tests. This should be backported"
* tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add cred_transfer test
landlock: Don't lose track of restrictions on cred_transfer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- don't use sprintf() with non-constant format string
* tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: avoid non-constant format string
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Will Deacon:
"We're still resolving a regression with the handling of unexpected
page faults on SMMUv3, but we're not quite there with a fix yet.
- Fix NULL dereference when freeing domain in Unisoc SPRD driver
- Separate assignment statements with semicolons in AMD page-table
code
- Fix Tegra erratum workaround when the CPU is using 16KiB pages"
* tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings
iommu/amd: Convert comma to semicolon
iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The recent integration of compiler collections introduced the
technology to check flexible array length at runtime by providing
proper annotations. In v6.10 kernel, a patch was merged into firewire
subsystem to utilize it, however the annotation was inadequate.
There is also the related change for the flexible array in sound
subsystem, but it causes a regression where the data in the payload of
isochronous packet is incorrect for some devices. These bugs are now
fixed"
* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The bulk of this is a series of fixes for the microchip-core driver
mostly originating from one of their customers, I also applied an
additional patch adding support for controlling the word size which
came along with it since it's still the merge window and clearly had a
bunch of fairly thorough testing.
We also have a fix for the compatible used to bind spidev to the
BH2228FV"
* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: add correct compatible for Rohm BH2228FV
dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
spi: microchip-core: add support for word sizes of 1 to 32 bits
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
spi: microchip-core: fix init function not setting the master and motorola modes
spi: microchip-core: only disable SPI controller when register value change requires it
spi: microchip-core: defer asserting chip select until just before write to TX FIFO
spi: microchip-core: fix the issues in the isr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"These two commits clean up the excessively loose dependencies for the
RZG2L USB VBCTRL regulator driver, ensuring it shouldn't prompt for
people who can't use it"
* tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Further restrict RZG2L USB VBCTRL regulator dependencies
regulator: renesas-usb-vbus-regulator: Update the default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Arnd sent a workaround for a false positive warning which was showing
up with GCC 14.1"
* tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: work around gcc-14.1 false-positive warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for the merge window to fix the build and boot
on some SoCs.
- Initialize struct clk_init_data in the TI da8xx-cfgchip driver so
that stack contents aren't used for things like clk flags leading
to unexpected behavior
- Don't leak stack contents in a debug print in the new Sophgo clk
driver
- Disable the new T-Head clk driver on 32-bit targets to fix the
build due to a division
- Fix Samsung Exynos4 fin_pll wreckage from the clkdev rework done
last cycle by using a struct clk_hw directly instead of a struct
clk consumer"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: fix getting Exynos4 fin_pll rate from external clocks
clk: T-Head: Disable on 32-bit Targets
clk: sophgo: clk-sg2042-pll: Fix uninitialized variable in debug output
clk: davinci: da8xx-cfgchip: Initialize clk_init_data before use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there are new features for the Designware controller and
fixes for the other IPs:
- dw: optional apb clock and power management support, IBI handling
fixes
- mipi-i3c-hci: IBI handling fixes
- svc: a few fixes"
* tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
dt-bindings: i3c: add header for generic I3C flags
i3c: master: svc: Fix error code in svc_i3c_master_do_daa_locked()
i3c: master: Enhance i3c_bus_type visibility for device searching & event monitoring
i3c: dw: Add power management support
i3c: dw: Add some functions for reusability
i3c: dw: Save timing registers and other values
i3c: master: svc: Improve DAA STOP handle code logic
i3c: dw: Add optional apb clock
i3c: dw: Use new *_enabled clk API
dt-bindings: i3c: dw: Add apb clock binding
i3c: master: svc: Convert comma to semicolon
i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported value
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addresses
i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpers
i3c: dw: Remove ibi_capable property
i3c: dw: Fix IBI intr programming
i3c: dw: Fix clearing queue thld
i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1
i3c: master: svc: resend target address when get NACK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Prevent the thermal core from flooding the kernel log with useless
messages if thermal zone temperature can never be determined (or its
sensor has failed permanently) and make it finally give up and disable
defective thermal zones (Rafael Wysocki)"
* tag 'thermal-6.11-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Back off when polling thermal zones on errors
thermal: trip: Split thermal_zone_device_set_mode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"11 hotfixes, 7 of which are cc:stable. 7 are MM, 4 are other"
* tag 'mm-hotfixes-stable-2024-07-26-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
selftests/mm: skip test for non-LPA2 and non-LVA systems
mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()
mm: memcg: add cacheline padding after lruvec in mem_cgroup_per_node
alloc_tag: outline and export free_reserved_page()
decompress_bunzip2: fix rare decompression failure
mm/huge_memory: avoid PMD-size page cache if needed
mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines
mm: fix old/young bit handling in the faulting path
dt-bindings: arm: update James Clark's email address
MAINTAINERS: mailmap: update James Clark's email address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer migration updates from Thomas Gleixner:
"Fixes and minor updates for the timer migration code:
- Stop testing the group->parent pointer as it is not guaranteed to
be stable over a chain of operations by design.
This includes a warning which would be nice to have but it produces
false positives due to the racy nature of the check.
- Plug a race between CPUs going in and out of idle and a CPU hotplug
operation. The latter can create and connect a new hierarchy level
which is missed in the concurrent updates of CPUs which go into
idle. As a result the events of such a CPU might not be processed
and timers go stale.
Cure it by splitting the hotplug operation into a prepare and
online callback. The prepare callback is guaranteed to run on an
online and therefore active CPU. This CPU updates the hierarchy and
being online ensures that there is always at least one migrator
active which handles the modified hierarchy correctly when going
idle. The online callback which runs on the incoming CPU then just
marks the CPU active and brings it into operation.
- Improve tracing and polish the code further so it is more obvious
what's going on"
* tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix grammar in comment
timers/migration: Spare write when nothing changed
timers/migration: Rename childmask by groupmask to make naming more obvious
timers/migration: Read childmask and parent pointer in a single place
timers/migration: Use a single struct for hierarchy walk data
timers/migration: Improve tracing
timers/migration: Move hierarchy setup into cpuhotplug prepare callback
timers/migration: Do not rely always on group->parent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes for issues introduced in this merge window:
- fix enhanced debugging in the Xen multicall handling
- two patches fixing a boot failure when running as dom0 in PVH mode"
* tag 'for-linus-6.11-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix memblock_reserve() usage on PVH
x86/xen: move xen_reserve_extra_memory()
xen: fix multicall debug data referencing
|
|
hostfs not keep the host directory when mounting. When the host
directory is none (default), fc->source is used as the host root
directory, and this is wrong. Here we use `parse_monolithic` to
handle the old mount path for parsing the root directory. For new
mount path, The `parse_param` is used for the host directory parse.
Reported-and-tested-by: Maciej Żenczykowski <maze@google.com>
Fixes: cd140ce9f611 ("hostfs: convert hostfs to use the new mount API")
Link: https://lore.kernel.org/all/CANP3RGceNzwdb7w=vPf5=7BCid5HVQDmz1K5kC9JG42+HVAh_g@mail.gmail.com/
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240725065130.1821964-1-lihongbo22@huawei.com
[brauner: minor fixes]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Christian noticed that it is possible for a privileged user to mount
most filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's namespace
is recorded in fs_context->user_ns. If the returned file descriptor is
then passed to a process priviliged in init_user_ns, that process can
call fsconfig(fd_fs, FSCONFIG_CMD_CREATE), creating a new superblock
with sb->s_user_ns set to the namespace of the process which called
fsopen().
This is problematic. We cannot assume that any filesystem which does not
set FS_USERNS_MOUNT has been written with a non-initial s_user_ns in
mind, increasing the risk for bugs and security issues.
Prevent this by returning EPERM from sget_fc() when FS_USERNS_MOUNT is
not set for the filesystem and a non-initial user namespace will be
used. sget() does not need to be updated as it always uses the user
namespace of the current context, or the initial user namespace if
SB_SUBMOUNT is set.
Fixes: cb50b348c71f ("convenience helpers: vfs_get_super() and sget_fc()")
Reported-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Link: https://lore.kernel.org/r/20240724-s_user_ns-fix-v1-1-895d07c94701@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In a commit 1d717123bb1a ("ALSA: firewire-lib: Avoid
-Wflex-array-member-not-at-end warning"), DEFINE_FLEX() macro was used to
handle variable length of array for header field in struct fw_iso_packet
structure. The usage of macro has a side effect that the designated
initializer assigns the count of array to the given field. Therefore
CIP_HEADER_QUADLETS (=2) is assigned to struct fw_iso_packet.header,
while the original designated initializer assigns zero to all fields.
With CIP_NO_HEADER flag, the change causes invalid length of header in
isochronous packet for 1394 OHCI IT context. This bug affects all of
devices supported by ALSA fireface driver; RME Fireface 400, 800, UCX, UFX,
and 802.
This commit fixes the bug by replacing it with the alternative version of
macro which corresponds no initializer.
Cc: stable@vger.kernel.org
Fixes: 1d717123bb1a ("ALSA: firewire-lib: Avoid -Wflex-array-member-not-at-end warning")
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/r/rrufondjeynlkx2lniot26ablsltnynfaq2gnqvbiso7ds32il@qk4r6xps7jh2/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240725155640.128442-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
This reverts commit d3155742db89df3b3c96da383c400e6ff4d23c25.
The header_length field is byte unit, thus it can not express the number of
elements in header field. It seems that the argument for counted_by
attribute can have no arithmetic expression, therefore this commit just
reverts the issued commit.
Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240725161648.130404-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The minmax infrastructure is overkill for simple constants, and can
cause huge expansions because those simple constants are then used by
other things.
For example, 'pageblock_order' is a core VM constant, but because it was
implemented using 'min_t()' and all the type-checking that involves, it
actually expanded to something like 2.5kB of preprocessor noise.
And when that simple constant was then used inside other expansions:
#define pageblock_nr_pages (1UL << pageblock_order)
#define pageblock_start_pfn(pfn) ALIGN_DOWN((pfn), pageblock_nr_pages)
and we then use that inside a 'max()' macro:
case ISOLATE_SUCCESS:
update_cached = false;
last_migrated_pfn = max(cc->zone->zone_start_pfn,
pageblock_start_pfn(cc->migrate_pfn - 1));
the end result was that one statement expanding to 253kB in size.
There are probably other cases of this, but this one case certainly
stood out.
I've added 'MIN_T()' and 'MAX_T()' macros for this kind of "core simple
constant with specific type" use. These macros skip the type checking,
and as such need to be very sparingly used only for obvious cases that
have active issues like this.
Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/36aa2cad-1db1-4abf-8dd2-fb20484aabc3@lucifer.local/
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have some very fancy min/max macros that have tons of sanity checking
to warn about mixed signedness etc.
This is all things that a sane compiler should warn about, but there are
no sane compiler interfaces for this, and '-Wsign-compare' is broken [1]
and not useful.
So then we compensate (some would say over-compensate) by doing the
checks manually with some truly horrid macro games.
And no, we can't just use __builtin_types_compatible_p(), because the
whole question of "does it make sense to compare these two values" is a
lot more complicated than that.
For example, it makes a ton of sense to compare unsigned values with
simple constants like "5", even if that is indeed a signed type. So we
have these very strange macros to try to make sensible type checking
decisions on the arguments to 'min()' and 'max()'.
But that can cause enormous code expansion if the min()/max() macros are
used with complicated expressions, and particularly if you nest these
things so that you get the first big expansion then expanded again.
The xen setup.c file ended up ballooning to over 50MB of preprocessed
noise that takes 15s to compile (obviously depending on the build host),
largely due to one single line.
So let's split that one single line to just be simpler. I think it ends
up being more legible to humans too at the same time. Now that single
file compiles in under a second.
Reported-and-reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/c83c17bb-be75-4c67-979d-54eee38774c6@lucifer.local/
Link: https://staticthinking.wordpress.com/2023/07/25/wsign-compare-is-garbage/ [1]
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.
It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.
So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug.
Link: https://lkml.kernel.org/r/20240725052007.4562-1-konishi.ryusuke@gmail.com
Fixes: a60be987d45d ("nilfs2: B-tree node cache")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+89cc4f2324ed37988b60@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=89cc4f2324ed37988b60
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Post my improvement of the test in e4a4ba415419 ("selftests/mm:
va_high_addr_switch: dynamically initialize testcases to enable LPA2
testing"):
The test begins to fail on 4k and 16k pages, on non-LPA2 systems. To
reduce noise in the CI systems, let us skip the test when higher address
space is not implemented.
Link: https://lkml.kernel.org/r/20240718052504.356517-1-dev.jain@arm.com
Fixes: e4a4ba415419 ("selftests/mm: va_high_addr_switch: dynamically initialize testcases to enable LPA2 testing")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__rmqueue_pcplist()
It's expected that no page should be left in pcp_list after calling
zone_pcp_disable() in offline_pages(). Previously, it's observed that
offline_pages() gets stuck [1] due to some pages remaining in pcp_list.
Cause:
There is a race condition between drain_pages_zone() and __rmqueue_pcplist()
involving the pcp->count variable. See below scenario:
CPU0 CPU1
---------------- ---------------
spin_lock(&pcp->lock);
__rmqueue_pcplist() {
zone_pcp_disable() {
/* list is empty */
if (list_empty(list)) {
/* add pages to pcp_list */
alloced = rmqueue_bulk()
mutex_lock(&pcp_batch_high_lock)
...
__drain_all_pages() {
drain_pages_zone() {
/* read pcp->count, it's 0 here */
count = READ_ONCE(pcp->count)
/* 0 means nothing to drain */
/* update pcp->count */
pcp->count += alloced << order;
...
...
spin_unlock(&pcp->lock);
In this case, after calling zone_pcp_disable() though, there are still some
pages in pcp_list. And these pages in pcp_list are neither movable nor
isolated, offline_pages() gets stuck as a result.
Solution:
Expand the scope of the pcp->lock to also protect pcp->count in
drain_pages_zone(), to ensure no pages are left in the pcp list after
zone_pcp_disable()
[1] https://lore.kernel.org/linux-mm/6a07125f-e720-404c-b2f9-e55f3f166e85@fujitsu.com/
Link: https://lkml.kernel.org/r/20240723064428.1179519-1-lizhijian@fujitsu.com
Fixes: 4b23a68f9536 ("mm/page_alloc: protect PCP lists with a spinlock")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Oliver Sand reported a performance regression caused by commit
98c9daf5ae6b ("mm: memcg: guard memcg1-specific members of struct
mem_cgroup_per_node"), which puts some fields of the mem_cgroup_per_node
structure under the CONFIG_MEMCG_V1 config option. Apparently it causes a
false cache sharing between lruvec and lru_zone_size members of the
structure. Fix it by adding an explicit padding after the lruvec member.
Even though the padding is not required with CONFIG_MEMCG_V1 set, it seems
like the introduced memory overhead is not significant enough to warrant
another divergence in the mem_cgroup_per_node layout, so the padding is
added unconditionally.
Link: https://lkml.kernel.org/r/20240723171244.747521-1-roman.gushchin@linux.dev
Fixes: 98c9daf5ae6b ("mm: memcg: guard memcg1-specific members of struct mem_cgroup_per_node")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407121335.31a10cb6-oliver.sang@intel.com
Tested-by: Oliver Sang <oliver.sang@intel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Outline and export free_reserved_page() because modules use it and it in
turn uses page_ext_{get|put} which should not be exported. The same
result could be obtained by outlining {get|put}_page_tag_ref() but that
would have higher performance impact as these functions are used in more
performance critical paths.
Link: https://lkml.kernel.org/r/20240717212844.2749975-1-surenb@google.com
Fixes: dcfe378c81f7 ("lib: introduce support for page allocation tagging")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407080044.DWMC9N9I-lkp@intel.com/
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: <stable@vger.kernel.org> [6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The decompression code parses a huffman tree and counts the number of
symbols for a given bit length. In rare cases, there may be >= 256
symbols with a given bit length, causing the unsigned char to overflow.
This causes a decompression failure later when the code tries and fails to
find the bit length for a given symbol.
Since the maximum number of symbols is 258, use unsigned short instead.
Link: https://lkml.kernel.org/r/20240717162016.1514077-1-ross.lagerwall@citrix.com
Fixes: bc22c17e12c1 ("bzip2/lzma: library support for gzip, bzip2 and lzma decompression")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
xarray can't support arbitrary page cache size. the largest and supported
page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71
("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However,
it's possible to have 512MB page cache in the huge memory's collapsing
path on ARM64 system whose base page size is 64KB. 512MB page cache is
breaking the limitation and a warning is raised when the xarray entry is
split as shown in the following example.
[root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize
KernelPageSize: 64 kB
[root@dhcp-10-26-1-207 ~]# cat /tmp/test.c
:
int main(int argc, char **argv)
{
const char *filename = TEST_XFS_FILENAME;
int fd = 0;
void *buf = (void *)-1, *p;
int pgsize = getpagesize();
int ret = 0;
if (pgsize != 0x10000) {
fprintf(stdout, "System with 64KB base page size is required!\n");
return -EPERM;
}
system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb");
system("echo 1 > /proc/sys/vm/drop_caches");
/* Open the xfs file */
fd = open(filename, O_RDONLY);
assert(fd > 0);
/* Create VMA */
buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0);
assert(buf != (void *)-1);
fprintf(stdout, "mapped buffer at 0x%p\n", buf);
/* Populate VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE);
assert(ret == 0);
ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ);
assert(ret == 0);
/* Collapse VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE);
assert(ret == 0);
ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE);
if (ret) {
fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno);
goto out;
}
/* Split xarray entry. Write permission is needed */
munmap(buf, TEST_MEM_SIZE);
buf = (void *)-1;
close(fd);
fd = open(filename, O_RDWR);
assert(fd > 0);
fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
TEST_MEM_SIZE - pgsize, pgsize);
out:
if (buf != (void *)-1)
munmap(buf, TEST_MEM_SIZE);
if (fd > 0)
close(fd);
return ret;
}
[root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test
[root@dhcp-10-26-1-207 ~]# /tmp/test
------------[ cut here ]------------
WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \
ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse \
xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net \
sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio
CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : xas_split_alloc+0xf8/0x128
lr : split_huge_page_to_list_to_order+0x1c4/0x780
sp : ffff8000ac32f660
x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0
x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d
x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000
x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c
x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8
x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40
x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000
Call trace:
xas_split_alloc+0xf8/0x128
split_huge_page_to_list_to_order+0x1c4/0x780
truncate_inode_partial_folio+0xdc/0x160
truncate_inode_pages_range+0x1b4/0x4a8
truncate_pagecache_range+0x84/0xa0
xfs_flush_unmap_range+0x70/0x90 [xfs]
xfs_file_fallocate+0xfc/0x4d8 [xfs]
vfs_fallocate+0x124/0x2f0
ksys_fallocate+0x4c/0xa0
__arm64_sys_fallocate+0x24/0x38
invoke_syscall.constprop.0+0x7c/0xd8
do_el0_svc+0xb4/0xd0
el0_svc+0x44/0x1d8
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Fix it by correcting the supported page cache orders, different sets for
DAX and other files. With it corrected, 512MB page cache becomes
disallowed on all non-DAX files on ARM64 system where the base page size
is 64KB. After this patch is applied, the test program fails with error
-EINVAL returned from __thp_vma_allowable_orders() and the madvise()
system call to collapse the page caches.
Link: https://lkml.kernel.org/r/20240715000423.316491-1-gshan@redhat.com
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
machines
Yves-Alexis Perez reported commit 4ef9ad19e176 ("mm: huge_memory: don't
force huge page alignment on 32 bit") didn't work for x86_32 [1]. It is
because x86_32 uses CONFIG_X86_32 instead of CONFIG_32BIT.
!CONFIG_64BIT should cover all 32 bit machines.
[1] https://lore.kernel.org/linux-mm/CAHbLzkr1LwH3pcTgM+aGQ31ip2bKqiqEQ8=FQB+t2c3dhNKNHA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240712155855.1130330-1-yang@os.amperecomputing.com
Fixes: 4ef9ad19e176 ("mm: huge_memory: don't force huge page alignment on 32 bit")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: Yves-Alexis Perez <corsac@debian.org>
Tested-by: Yves-Alexis Perez <corsac@debian.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [6.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 3bd786f76de2 ("mm: convert do_set_pte() to set_pte_range()")
replaced do_set_pte() with set_pte_range() and that introduced a
regression in the following faulting path of non-anonymous vmas which
caused the PTE for the faulting address to be marked as old instead of
young.
handle_pte_fault()
do_pte_missing()
do_fault()
do_read_fault() || do_cow_fault() || do_shared_fault()
finish_fault()
set_pte_range()
The polarity of prefault calculation is incorrect. This leads to prefault
being incorrectly set for the faulting address. The following check will
incorrectly mark the PTE old rather than young. On some architectures
this will cause a double fault to mark it young when the access is
retried.
if (prefault && arch_wants_old_prefaulted_pte())
entry = pte_mkold(entry);
On a subsequent fault on the same address, the faulting path will see a
non NULL vmf->pte and instead of reaching the do_pte_missing() path, PTE
will then be correctly marked young in handle_pte_fault() itself.
Due to this bug, performance degradation in the fault handling path will
be observed due to unnecessary double faulting.
Link: https://lkml.kernel.org/r/20240710014539.746200-1-rtummala@nvidia.com
Fixes: 3bd786f76de2 ("mm: convert do_set_pte() to set_pte_range()")
Signed-off-by: Ram Tummala <rtummala@nvidia.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
My new address is james.clark@linaro.org
Link: https://lkml.kernel.org/r/20240709102512.31212-3-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geliang Tang <geliang@kernel.org>
Cc: Hao Zhang <quic_hazha@quicinc.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Mao Jinlong <quic_jinlmao@quicinc.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Matt Ranostay <matt@ranostay.sg>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
