summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-03-13imxfb: add platform specific init/exit functionsSascha Hauer2-0/+17
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MX2: Add FEC platform deviceSascha Hauer4-0/+23
The in kernel FEC driver has recently been ported to a platform driver. Add a platform_device for it and register it for pcm038 and mx27ads. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31ads: Initial support for Wolfson Microelectronics 1133-EV1 moduleMark Brown2-0/+303
The i.MX31ADS supports pluggable PMU modules, including the WM835x based Wolfson Microelectronics 1133-EV1. These boards provide power, audio, RTC and watchdiog services to the system. This patch adds initial support for those boards in I2C mode. Currently support is limited by the available support for the features of the i.MX31 in the mainline kernel. Some further work will be needed once other PMU modules are supported and once there is SPI support. Many of the regulator constraints will be sharable with other PMU boards. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13pcm037: use of new iomux implementationValentin Longchamp1-11/+17
This was only compilation tested. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31pdk: use of new iomux implementationValentin Longchamp1-5/+8
This was only compilation tested. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31ads: use of new iomux implementationValentin Longchamp1-6/+9
This was only compilation tested. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31moboard: use of new iomux implementationValentin Longchamp1-15/+22
This example takes advantage of the possibility to use tables of iomux configs. This is inspired from mx1-mx2 iomux code. It allows a better code readability. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31: rework of iomux supportValentin Longchamp2-11/+122
This new implemenatation avoids that two physical pins are claimed by the same driver (also with the the gpr hardware modes). The gpio kernel lib is also called when a capable gpio pin is assigned its gpio function. The mxc_iomux_mode function is still here for backward compatibility but should not be used anymore. V2: In the precendent revision, the iomux code was claiming a pin when its hardware mode was changed. This was uncorrect: when the hardware mode is changed, the pin must still be claimed through the iomux. In order to have a pin working in mode hw2, we must fist issue the mxc_iomux_set_gpr call and then the corresponding mxc_iomux_mode calls with the FUNC mode (usually done with mxc_iomux_setup_multiple_pins). The reverse calls must be done to fee the pins. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13remove unused static function gpio_fec_inactiveUwe Kleine-König2-12/+0
... from both mx27ads.c and pcm038.c Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Martin Fuzzey <mfuzzey@gmail.com>
2009-03-13fix warning "control reaches end of non-void function"Uwe Kleine-König1-0/+1
Add a return 0 analogous to uart_mxc_port[0-2]_exit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Martin Fuzzey <mfuzzey@gmail.com>
2009-03-13mx31ads: Make unexported data staticMark Brown1-3/+3
Keeps sparse happy. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31ads: Fix build for missing mx31.hMark Brown1-0/+2
Several of the macros in mx31ads.h depend on mx31.h which is no longer included in quite so many standard headers as it once was. Include it directly so we can build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31: Add device definitions for the i.MX3x I2C controllersMark Brown2-0/+63
The i.MX I2C driver has not yet been merged into mainline but it is near to that and the device defintions don't depend directly on it so we can add the devices now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx21: Framebuffer support for i.MX21Holger Schurig4-2/+35
This patch mimicks what Martin wrote on the mailing list: * move arch/arm/mach-imx/include/mach/imxfb.h into arch/arm/mach-mxc/include/mach/imxfb.h * changes Kconfig so that CONFIG_FB_IMX is selectable * adds a platform device (copied from some pengutronix patches) Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx21: clock support for i.MX21Holger Schurig4-0/+1245
Based on code from "Martin Fuzzey" <mfuzzey@gmail.com> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx2x: split i.MX21/i.MX27 register definitionsHolger Schurig5-180/+306
* define new CONFIG_ARCH_MX21 (this one is currently mutually exclusive to CONFIG_ARCH_MX27, but this might change) * splits one header file. Memory definitions, interrupt sources, DMA channels are split into common part, i.MX27 specific and i.MX21 specific. * guard access to UART5/UART6, which don't exist on i.MX21 Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx2x: removes a bunch of sparse-warningsHolger Schurig9-19/+22
Here are some of the warnings that get fixed by this: > 200 times: warning: cast adds address space to expression (<asn:2>) twelve times: warning: symbol 'xxx' was not declared. Should it be static two times: warning: symbol 'clock' shadows an earlier one five times: warning: incorrect type in initializer (different address spaces) Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MX27 Clock reworkSascha Hauer4-1504/+387
This changes MX27 to use common clkdev. It also cleans up MX27 clock support to be more readable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: add clkdev supportSascha Hauer3-0/+21
This patch only adds general clkdev support without actually switching any MXC architecture to clkdev. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: remove _clk suffix from clock namesSascha Hauer7-22/+22
The context makes it clear already that these are clocks, so there's no need for such a suffix. This patch only changes the clocks actually used in the tree. The remaining clocks are renamed in the subsequent architecture specific patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: rework timer/clock initialisationSascha Hauer13-36/+30
- rename mxc_clocks_init to architecture specific versions. This allows us to have more than one architecture compiled in. - call mxc_timer_init from clock initialisation instead from board code Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: Use a single function for decoding a PLLSascha Hauer5-88/+57
We had 3 versions of this function in clock support for MX1/2/3 Use a single one instead. I picked the one from the MX3 as it seems to calculate more accurate as the other ones. Also, on MX27 and MX31 mfn can be negative, this hasn't been handled correctly on MX27 since now. This patch has been tested on MX27 and MX31 and produces the same clock frequencies for me. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx21: add kbuild support for the Freescale i.MX21Holger Schurig5-3/+31
* adds Kconfig variables * specifies different physical address for i.MX21 because of the different memory layouts * disables support for UART5/UART6 in the i.MX serial driver (the i.MX21 doesn't have those modules) Based on code from "Martin Fuzzey" <mfuzzey@gmail.com> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx2x: new IOMUX definitionsHolger Schurig11-423/+872
* removed iomux-mx1-mx2.h completely * distributes the former contents to four different files (iomux-mx1.h, iomux-mx21.h, iomux-mx27.h and the file iomux-mx2x.h, which is common to both i.MX21 and i.MX27). * adds all documented IOMUX definitions for i.MX21 and i.MX27 * fixes a few that were wrong (PD14_AOUT_FEC_CLR, PE16_AF_RTCK). * don't silenly include <linux/io.h> * and fixes all collateral damage from above Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-10i810: fix kernel crash fix when struct fb_var_screeninfo is suppliedSamuel CUELLA1-2/+3
Prevent the kernel from being crashed by a divide-by-zero operation when supplied an incorrectly filled 'struct fb_var_screeninfo' from userland. Previously i810_main.c:1005 (i810_check_params) was using the global 'yres' symbol previously defined at i810_main.c:145 as a module parameter value holder (i810_main.c:2174). If i810fb is compiled-in or if this param doesn't get a default value, this direct usage leads to a divide-by-zero at i810_main.c:1005 (i810_check_params). The patch simply replace the 'yres' global, perhaps undefined symbol usage by a given parameter structure lookup. This problem occurs with directfb, mplayer -vo fbdev, SDL library. It was also reported ( but non solved ) at: http://mail.directfb.org/pipermail/directfb-dev/2008-March/004050.html Signed-off-by: Samuel CUELLA <samuel.cuella@supinfo.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10m68knommu: m528x build fixSteven King1-228/+0
There isn't any mcfqspi.h in the tree, and without it everything inside the #ifdef CONFIG_SPI is uncompilable. Signed-off-by: Steven King <sfking@fdwdc.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10m68knommu: m5206e build fixSteven King1-0/+1
Signed-off-by: Steven King <sfking@fdwdc.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10rcu: documentation 1Q09 updatePaul E. McKenney1-0/+12
Update the RCU documentation to call out the need for callers of primitives like call_rcu() and synchronize_rcu() to prevent subsequent RCU readers from hazard. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10kernel/user.c: fix a memory leak when freeing up non-init usernamespaces usersDhaval Giani1-7/+7
We were returning early in the sysfs directory cleanup function if the user belonged to a non init usernamespace. Due to this a lot of the cleanup was not done and we were left with a leak. Fix the leak. Reported-by: Serge Hallyn <serue@linux.vnet.ibm.com> Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Tested-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10mtd: physmap: fix NULL pointer dereference in error pathAtsushi Nemoto1-8/+11
commit e480814f138cd5d78a8efe397756ba6b6518fdb6 ("[MTD] [MAPS] physmap: fix wrong free and del_mtd_{partition,device}") introduces a NULL pointer dereference in physmap_flash_remove when called from the error path in physmap_flash_probe (if map_probe failed). Call del_mtd_{partition,device} only if info->cmtd was not NULL. Reported-by: pHilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10intel-agp: fix a panic with 1M of shared memory, no GTT entriesLubomir Rintel1-3/+5
When GTT size is equal to amount of video memory, the amount of GTT entries is computed lower than zero, which is invalid and leads to off-by-one error in intel_i915_configure() Originally posted here: http://bugzilla.kernel.org/show_bug.cgi?id=12539 http://bugzilla.redhat.com/show_bug.cgi?id=445592 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Dave Airlie <airlied@linux.ie> Reviewed-by: Eric Anholt <eric@anholt.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10mtd_dataflash: fix probing of AT45DB321C chips.Will Newton1-1/+2
Commit 771999b65f79264acde4b855e5d35696eca5e80c ("[MTD] DataFlash: bugfix, binary page sizes now handled") broke support for probing AT45DB321C flash chips. These chips do not support the "page size" status bit, so if we match the JEDEC id return early. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Will Newton <will.newton@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10idr: make idr_remove_all() do removal -before- free_layer()Paul E. McKenney1-1/+1
Fix a problem in the IDR system, where an idr_remove_all() hands a data element to call_rcu() (via free_layer()) before making that data element inaccessible to new readers. This is very bad, and results in readers still having a reference to this data element at the end of the grace period. Tests on large machines that concurrently map and unmap user-space memory within the same multithreaded process result in crashes within about five minutes. Applying this patch increases the kernel's longevity to the three-to-eight-hour range. There appear to be other similar problems in idr_get_empty_slot() and sub_remove(), but I fixed the easy one in idr_remove_all() first. It is therefore no surprise that failures still occur. Located-by: Milton Miller II <miltonm@austin.ibm.com> Tested-by: Milton Miller II <miltonm@austin.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10devpts: remove graffitiAlexey Dobriyan1-5/+0
Very annoying when working with containters. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10x86/agp: tighten check to update amd nb apertureYinghai Lu1-4/+9
Impact: fix bug to make agp work with dri Jeffrey reported that dri does work with 64bit, but doesn't work with 32bit it turns out NB aperture is 32M, aperture on agp is 128M 64bit is using 64M for vaidation for 64 iommu/gart 32bit is only using 32M..., and will not update the nb aperture. So try to compare nb apterture and agp apterture before leaving not touch nb aperture. Reported-by: Jeffrey Trull <jetrull@sbcglobal.net> Tested-by: Jeffrey Trull <jetrull@sbcglobal.net> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Dave Airlie <airlied@linux.ie> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10xtensa: fix compilation somewhatAlexey Dobriyan5-7/+6
* ->put_char changes * HIGHMEM is bogus it seems, there is no kmap_atomic() et al * some includes Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Chris Zankel <zankel@tensilica.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10lm85: add VRM10 support for adt7468 chipDarrick J. Wong1-1/+2
The adt7468 chip supports VRM10 sensors just like the adt7463; add a missing check for it. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10lm85: fix the version check that broke adt7468 probingDarrick J. Wong1-1/+4
The verstep check in the lm85 driver fails because the upper nibble of the version register is 0x7, not 0x6, on the adt7468 chip. Probing of all adt7468s was broken by 69fc1feba2d5856ff74dedb6ae9d8c490210825c ("hwmon: (lm85) Rework the device detection"), and this patch fixes that. Also add in a missing i2c_device_id that accidentally got dropped from the original patch. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10menu: fix embedded menu snafuRandy Dunlap1-15/+15
The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED menu. Fix by moving it to just after all of the EMBEDDED menu symbols. Also, ANON_INODES has a similar problem, so move it to just above the EMBEDDED menu items since it is used in the EMBEDDED menu. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10mm: get_nid_for_pfn() returns intRoel Kluin1-1/+1
get_nid_for_pfn() returns int Presumably the (nid < 0) case has never happened. We do know that it is happening on one system while creating a symlink for a memory section so it should also happen on the same system if unregister_mem_sect_under_nodes() were called to remove the same symlink. The test was actually added in response to a problem with an earlier version reported by Yasunori Goto where one or more of the leading pages of a memory section on the 2nd node of one of his systems was uninitialized because I believe they coincided with a memory hole. That earlier version did not ignore uninitialized pages and determined the nid by considering only the 1st page of each memory section. This caused the symlink to the 1st memory section on the 2nd node to be incorrectly created in /sys/devices/system/node/node0 instead of /sys/devices/system/node/node1. The problem was fixed by adding the test to skip over uninitialized pages. I suspect we have not seen any reports of the non-removal of a symlink due to the incorrect declaration of the nid variable in unregister_mem_sect_under_nodes() because - systems where a memory section could have an uninitialized range of leading pages are probably rare. - memory remove is probably not done very frequently on the systems that are capable of demonstrating the problem. - lingering symlink(s) that should have been removed may have simply gone unnoticed. [garyhade@us.ibm.com: wrote changelog] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 mmiotrace: fix remove_kmmio_fault_pages()
2009-03-10Merge branch 'sh/for-2.6.29' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: video: deferred io cleanup fix for sh_mobile_lcdcfb sh: Add media/soc_camera.h to board setup of Renesas AP325RXA
2009-03-10video: deferred io cleanup fix for sh_mobile_lcdcfbMagnus Damm1-4/+2
Fix deferred io cleanup patch in the sh_mobile_lcdcfb driver. If probe() fails early the sh_mobile_lcdc_stop() function will be called to clean up deferred io. This patch modifies the code to only call fb_deferred_io_cleanup() after deferred io has been initialized. With this patch applied we no longer hit BUG_ON() inside fb_deferred_io_cleanup(). Triggers on a Migo-R with the SYS QVGA panel board unmounted. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: Add media/soc_camera.h to board setup of Renesas AP325RXANobuhiro Iwamatsu1-0/+1
Other compilation errors were revised by commit of "sh: ap325rxa: Revert ov772x support" (08c2f5b4d76f83213e379b12df504269d21c9e7c) but other compilation errors are given. We revert this commit and need to add new header(media/soc_camera.h). This change revises new compilation error. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-09Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds1-12/+18
* 'for-linus' of git://neil.brown.name/md: md: fix deadlock when stopping arrays
2009-03-09Merge branch 'fixes' of ↵Linus Torvalds4-35/+27
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule. Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."
2009-03-09copy_process: fix CLONE_PARENT && parent_exec_id interactionOleg Nesterov1-6/+5
CLONE_PARENT can fool the ->self_exec_id/parent_exec_id logic. If we re-use the old parent, we must also re-use ->parent_exec_id to make sure exit_notify() sees the right ->xxx_exec_id's when the CLONE_PARENT'ed task exits. Also, move down the "p->parent_exec_id = p->self_exec_id" thing, to place two different cases together. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Howells <dhowells@redhat.com> Cc: Serge E. Hallyn <serge@hallyn.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-09[CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule.Dave Jones1-0/+9
Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
2009-03-09Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."Dave Jones3-35/+18
This reverts commit e088e4c9cdb618675874becb91b2fd581ee707e6. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: Dave Jones <davej@redhat.com>
2009-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds36-172/+286
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) p54: fix race condition in memory management cfg80211: test before subtraction on unsigned iwlwifi: fix error flow in iwl*_pci_probe rt2x00 : more devices to rt73usb.c rt2x00 : more devices to rt2500usb.c bonding: Fix device passed into ->ndo_neigh_setup(). vlan: Fix vlan-in-vlan crashes. net: Fix missing dev->neigh_setup in register_netdevice(). tmspci: fix request_irq race pkt_sched: act_police: Fix a rate estimator test. tg3: Fix 5906 link problems SCTP: change sctp_ctl_sock_init() to try IPv4 if IPv6 fails IPv6: add "disable" module parameter support to ipv6.ko sungem: another error printed one too early aoe: error printed 1 too early net pcmcia: worklimit reaches -1 net: more timeouts that reach -1 net: fix tokenring license dm9601: new vendor/product IDs netlink: invert error code in netlink_set_err() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 16:59:54 +0000