summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-01-10netdev: bfin_mac: let boards set vlan masksMike Frysinger3-0/+11
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: disable hardware checksum if writeback cache is enabledSonic Zhang1-0/+7
With writeback caches, corrupted RX packets will be sent up the stack without any error markings. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: drop unused Mac dataMike Frysinger1-1/+0
We don't use this local "Mac" data anywhere (since we rely on the netdev's storage), so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: mark setup_system_regs as staticMike Frysinger1-1/+1
No need for this to be exported since it is only used in this driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: clean up printk messagesMike Frysinger1-36/+29
Use netdev_* and pr_* helper funcs for output rather than printk. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: update ntuple filter configurationAlexander Duyck5-371/+250
This change fixes several issues found in ntuple filtering while I was doing the ATR refactor. Specifically I updated the masks to work correctly with the latest version of ethtool, I cleaned up the exception handling and added detailed error output when a filter is rejected, and corrected several bits that were set incorrectly in ixgbe_type.h. The previous version of this patch included a printk that was left over from me fixing the filter setup. This patch does not include that printk. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: further flow director performance optimizationsAlexander Duyck4-44/+194
This change adds a compressed input type for atr signature hash computation. It also drops the use of the set functions when setting up the ATR input since we can then directly setup the hash input as two dwords that can be stored and passed as registers. With these changes the cost of computing the has is low enough that we can perform a hash computation on each TCP SYN flagged packet allowing us to drop the number of flow director misses considerably in tests such as netperf TCP_CRR. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: cleanup flow director hash computation to improve performanceAlexander Duyck5-253/+182
This change cleans up the layout of the flow director data, and the algorithm used to calculate the hash resulting in a 35x / 3500% performance increase versus the old flow director hash computation. The overall effect is only a 1% increase in transactions per second though due to the fact that only 1 packet in 20 are actually hashed upon. TCP_RR before: Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 60.00 23059.27 16384 87380 TCP_RR after: Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 60.00 23239.98 16384 87380 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: make sure per Rx queue is disabled before unmapping the receive bufferYi Zou3-7/+39
When disable the Rx logic globally, we would also want to disable the per Rx queue receive logic by per queue Rx control register RXDCTL so no more DMA is happening from the packet buffer to the receive buffer associated with the Rx ring, before we start unmapping Rx ring receive buffer. The hardware may take max of 100us before the corresponding Rx queue is really disabled. Added ixgbe_disable_rx_queue() for this purpose. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000: Add support for the CE4100 reference platformDirk Brandewie4-76/+365
This patch adds support for the gigabit phys present on the CE4100 reference platforms. Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: add custom set_d[0|3]_lplu_state function pointer for 82574Bruce Allan2-0/+57
82574 needs to configure Low Power Link Up (or LPLU) differently than the other parts in the 8257x family supported by the driver. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: power off PHY after reset when interface is downBruce Allan3-35/+53
Some Phys supported by the driver do not remain powered off across a reset of the device when the interface is down, e.g. on 82571, but not on 82574. This patch powers down (only when WoL is disabled) the PHY after a reset if the interface is down and the ethtool diagnostics are not currently running. The ethtool diagnostic function required a minor re-factor as a result, and the e1000_[get|put]_hw_control() functions are renamed since they are no longer static to netdev.c as they are needed by the ethtool diagnostics. A couple minor whitespace issues were cleaned up, too. Reported-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: use either_crc_le() rather than re-write itBruce Allan2-18/+2
For the 82579 jumbo frame workaround, there is no need to re-write the CRC calculation functionality already found in the kernel's ether_crc_le(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: properly bounds-check string functionsBruce Allan2-7/+11
Use string functions with bounds checking rather than their non-bounds checking counterparts, and do not hard code these boundaries. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: convert calls of ops.[read|write]_reg to e1e_[r|w]phyBruce Allan3-53/+44
Cleans up the code a bit by using the driver-specific e1e_rphy and e1e_wphy macros instead of the full function pointer variants. Fix a couple whitespace issue with two already existing calls to e1e_wphy. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: cleanup variables set but not usedBruce Allan4-11/+21
The ICR register is clear on read and we don't care what the returned value is when resetting the hardware so the icr variable(s) can be removed. We should not ignore the return from e1000_lv_jumbo_workaround_ich8lan() and from e1000_get_phy_id_82571() (dump a debug message when it fails and when an unknown Phy id is returned). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Convert checksums to use centrally computed features.Jesse Gross1-28/+12
In order to compute the features for other offloads (primarily scatter/gather), we need to first check the ability of the NIC to offload the checksum for the packet. Since we have already computed this, we can directly use the result instead of figuring it out again. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Convert skb_need_linearize() to use precomputed features.Jesse Gross1-15/+6
This switches skb_need_linearize() to use the features that have been centrally computed. In doing so, this fixes a problem where scatter/gather should not be used because the card does not support checksum offloading on that type of packet. On device registration we only check that some form of checksum offloading is available if scatter/gatther is enabled but we must also check at transmission time. Examples of this include IPv6 or vlan packets on a NIC that only supports IPv4 offloading. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Convert dev_gso_segment() to use precomputed features.Jesse Gross1-5/+3
This switches dev_gso_segment() to use the device features computed by the centralized routine. In doing so, it fixes a problem where it would always use dev->features, instead of those appropriate to the number of vlan tags if any are present. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Pass features into netif_needs_gso().Jesse Gross3-12/+10
Now that there is a single function that can compute the device features relevant to a packet, we don't want to run it for each offload. This converts netif_needs_gso() to take the features of the device, rather than computing them itself. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Generalize netif_get_vlan_features().Jesse Gross2-10/+29
netif_get_vlan_features() is currently only used by netif_needs_gso(), so it only concerns itself with GSO features. However, several other places also should take into account the contents of the packet when deciding whether to offload to hardware. This generalizes the function to return features about all of the various forms of offloading. Since offloads tend to be linked together, this avoids duplicating the logic in each location (i.e. the scatter/gather code also needs the checksum logic). Suggested-by: Michał Mirosław <mirqus@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Accept NETIF_F_HW_CSUM for all protocols.Jesse Gross1-1/+1
We currently only have software fallback for one type of checksum: the TCP/UDP one's complement. This means that a protocol that uses hardware offloading for a different type of checksum (FCoE, SCTP) must directly check the device's features and do the right thing ahead of time. By the time we get to dev_can_checksum(), we're only deciding whether to apply the one algorithm in software or hardware. NETIF_F_HW_CSUM has the same capabilities as the software version, so we should always use it if present. The primary advantage of this is multiply tagged vlans can use hardware checksumming. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09r8169: delay phy init until device opens.françois romieu1-10/+11
It workarounds the 60s firmware load failure timeout for the non-modular case. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net: fix kernel-doc warning in core/filter.cRandy Dunlap1-1/+1
Fix new kernel-doc notation warning in net/core/filter.c: Warning(net/core/filter.c:172): No description found for parameter 'fentry' Warning(net/core/filter.c:172): Excess function parameter 'filter' description in 'sk_run_filter' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net/sock.h: make some fields private to fix kernel-doc warning(s)Randy Dunlap1-0/+4
Fix new kernel-doc notation warning in sock.h by annotating skc_dontcopy_* as private fields. Warning(include/net/sock.h:163): No description found for parameter 'skc_dontcopy_end[0]' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09netlink: test for all flags of the NLM_F_DUMP compositeJan Engelhardt5-6/+6
Due to NLM_F_DUMP is composed of two bits, NLM_F_ROOT | NLM_F_MATCH, when doing "if (x & NLM_F_DUMP)", it tests for _either_ of the bits being set. Because NLM_F_MATCH's value overlaps with NLM_F_EXCL, non-dump requests with NLM_F_EXCL set are mistaken as dump requests. Substitute the condition to test for _all_ bits being set. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09forcedeth: Do not use legacy PCI power managementRafael J. Wysocki1-22/+12
The forcedeth driver uses the legacy PCI power management, so it has to do PCI-specific things in its ->suspend() and ->resume() callbacks and some of them are not done correctly. Convert forcedeth to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Tested with nVidia Corporation MCP55 Ethernet (rev a2). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6David S. Miller4-3/+7
2011-01-09sky2: convert to new VLAN model (v0.2)Stephen Hemminger2-71/+52
This converts sky2 to new VLAN offload flags control via ethtool. It also allows for transmit offload of vlan tagged frames which was not possible before. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09sky2: fix limited auto negotiationStephen Hemminger1-9/+17
The sky2 driver would always try all possible supported speeds even if the user only asked for a limited set of speed/duplex combinations. Reported-by: Mohsen Hariri <m.hariri@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09bnx2x: Fix the race on bp->stats_pending.Vladislav Zolotarov1-0/+5
Fix the race on bp->stats_pending between the timer and a LINK_UP event handler. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09bnx2x: Move to D0 before clearing MSI/MSI-X configuration.Vladislav Zolotarov1-0/+6
Move to D0 before clearing MSI/MSI-X configuration. Otherwise MSI/MSI-X won't be cleared. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09bnx2x: registers dump fixesVladislav Zolotarov6-471/+891
Fixes in registers dump: - Properly calculate dump length for 57712. - Prevent HW blocks parity attentions when dumping registers in order to prevent false parity errors handling. - Update the bnx2x_dump.h file: old one had a few bugs that could cause fatal HW error as a result of a registers dump. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09bnx2x: Don't prevent RSS configuration in INT#x and MSI interrupt modes.Vladislav Zolotarov1-7/+0
Don't prevent RSS configuration in INT#x and MSI interrupt modes. Otherwise Rx hash key won't be available. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09Madge Ambassador ATM Adapter driver: Always release_firmware() in ↵Jesper Juhl1-7/+12
ucode_init() and don't leak memory. Failure to call release_firmware() will result in memory leak in drivers/atm/ambassador.c::ucode_init(). This patch makes sure we always call release_firmware() when needed, thus removing the leak(s). Yes, I know checkpatch complains about this patch, but it was either that or completely mess up the existing style, so I opted to use the existing style and live with the checkpatch related flak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09hamradio: Resolve memory leak due to missing firmware release in add_mcs()Jesper Juhl1-2/+2
Failure to release_firmware() in drivers/net/hamradio/yam.c::add_mcs() causes memory leak. This patch should fix it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net/fec: add dual fec support for mx28Shawn Guo3-21/+139
This patch is to add mx28 dual fec support. Here are some key notes for mx28 fec controller. - The mx28 fec controller naming ENET-MAC is a different IP from FEC used on other i.mx variants. But they are basically compatible on software interface, so it's possible to share the same driver. - ENET-MAC design on mx28 made an improper assumption that it runs on a big-endian system. As the result, driver has to swap every frame going to and coming from the controller. - The external phys can only be configured by fec0, which means fec1 can not work independently and both phys need to be configured by mii_bus attached on fec0. - ENET-MAC reset will get mac address registers reset too. - ENET-MAC MII/RMII mode and 10M/100M speed are configured differently FEC. - ETHER_EN bit must be set to get ENET-MAC interrupt work. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net/fec: improve pm for better suspend/resumeShawn Guo1-4/+8
The following commit made a fix to use fec_enet_open/fec_enet_close over fec_enet_init/fec_stop for suspend/resume, because fec_enet_init does not allow to have a working network interface at resume. e3fe8558c7fc182972c3d947d88744482111f304 net/fec: fix pm to survive to suspend/resume This fix works for i.mx/mxc fec controller, but fails on mx28 fec which gets a different interrupt logic design. On i.mx fec, interrupt can be triggered even bit ETHER_EN of ECR register is not set. But on mx28 fec, ETHER_EN must be set to get interrupt work. Meanwhile, MII interrupt is mandatory to resume the driver, because MDIO read/write changed to interrupt mode by commit below. 97b72e4320a9aaa4a7f1592ee7d2da7e2c9bd349 fec: use interrupt for MDIO completion indication fec_restart/fec_stop comes out as the solution working for both cases. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net/fec: add mac field into platform data and consolidate fec_get_macShawn Guo2-43/+41
Add mac field into fec_platform_data and consolidate function fec_get_mac to get mac address in following order. 1) module parameter via kernel command line fec.macaddr=0x00,0x04,... 2) from flash in case of CONFIG_M5272 or fec_platform_data mac field for others, which typically have mac stored in fuse 3) fec mac address registers set by bootloader Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net/fec: remove the use of "index" which is legacyShawn Guo1-6/+3
The "index" becomes legacy since fep->pdev->id starts working to identify the instance. Moreover, the call of fec_enet_init(ndev, 0) always passes 0 to fep->index. This makes the following code in fec_get_mac buggy. /* Adjust MAC if using default MAC address */ if (iap == fec_mac_default) dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; It may be the time to remove "index" and use fep->pdev->id instead. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net/fec: fix MMFR_OP type in fec_enet_mdio_writeShawn Guo1-2/+2
FEC_MMFR_OP_WRITE should be used than FEC_MMFR_OP_READ in a mdio write operation. It's probably a typo introduced by commit: e6b043d512fa8d9a3801bf5d72bfa3b8fc3b3cc8 netdev/fec.c: add phylib supporting to enable carrier detection (v2) Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-07Merge branch 'for-next' of ↵Linus Torvalds17-400/+701
git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus: hfsplus: %L-to-%ll, macro correction, and remove unneeded braces hfsplus: spaces/indentation clean-up hfsplus: C99 comments clean-up hfsplus: over 80 character lines clean-up hfsplus: fix an artifact in ioctl flag checking hfsplus: flush disk caches in sync and fsync hfsplus: optimize fsync hfsplus: split up inode flags hfsplus: write up fsync for directories hfsplus: simplify fsync hfsplus: avoid useless work in hfsplus_sync_fs hfsplus: make sure sync writes out all metadata hfsplus: use raw bio access for partition tables hfsplus: use raw bio access for the volume headers hfsplus: always use hfsplus_sync_fs to write the volume header hfsplus: silence a few debug printks hfsplus: fix option parsing during remount Fix up conflicts due to VFS changes in fs/hfsplus/{hfsplus_fs.h,unicode.c}
2011-01-07Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds45-1365/+1596
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits) spi/omap: Fix DMA API usage in OMAP MCSPI driver spi/imx: correct the test on platform_get_irq() return value spi/topcliff: Typo fix threhold to threshold spi/dw_spi Typo change diable to disable. spi/fsl_espi: change the read behaviour of the SPIRF spi/mpc52xx-psc-spi: move probe/remove to proper sections spi/dw_spi: add DMA support spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs spi/dw_spi: Fix too short timeout in spi polling loop spi/pl022: convert running variable spi/pl022: convert busy flag to a bool spi/pl022: pass the returned sglen to the DMA engine spi/pl022: map the buffers on the DMA engine spi/topcliff_pch: Fix data transfer issue spi/imx: remove autodetection spi/pxa2xx: pass of_node to spi device and set a parent device spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes. spi/pxa2xx: Add chipselect support for Sodaville spi/pxa2xx: Consider CE4100's FIFO depth spi/pxa2xx: Add CE4100 support ...
2011-01-07Merge branch 'for-2.6.38' of ↵Linus Torvalds62-275/+703
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits) gameport: use this_cpu_read instead of lookup x86: udelay: Use this_cpu_read to avoid address calculation x86: Use this_cpu_inc_return for nmi counter x86: Replace uses of current_cpu_data with this_cpu ops x86: Use this_cpu_ops to optimize code vmstat: User per cpu atomics to avoid interrupt disable / enable irq_work: Use per cpu atomics instead of regular atomics cpuops: Use cmpxchg for xchg to avoid lock semantics x86: this_cpu_cmpxchg and this_cpu_xchg operations percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support percpu,x86: relocate this_cpu_add_return() and friends connector: Use this_cpu operations xen: Use this_cpu_inc_return taskstats: Use this_cpu_ops random: Use this_cpu_inc_return fs: Use this_cpu_inc_return in buffer.c highmem: Use this_cpu_xx_return() operations vmstat: Use this_cpu_inc_return for vm statistics x86: Support for this_cpu_add, sub, dec, inc_return percpu: Generic support for this_cpu_add, sub, dec, inc_return ... Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c} as per Tejun.
2011-01-07Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds80-156/+289
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
2011-01-07Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds8-36/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Constify function scope static struct sched_param usage sched: Fix strncmp operation sched: Move sched_autogroup_exit() to free_signal_struct() sched: Fix struct autogroup memory leak sched: Mark autogroup_init() __init sched: Consolidate the name of root_task_group and init_task_group
2011-01-07Merge branch 'x86-apic-cleanups-for-linus' of ↵Linus Torvalds9-228/+75
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: apic: Cleanup and simplify setup_local_APIC() x86: Further simplify mp_irq info handling x86: Unify 3 similar ways of saving mp_irqs info x86, ioapic: Avoid writing io_apic id if already correct x86, x2apic: Don't map lapic addr for preenabled x2apic systems x86, sfi: Use register_lapic_address() x86, apic: Use register_lapic_address() in init_apic_mapping() x86, apic: Remove early_init_lapic_mapping() x86, apic: Unify identical register_lapic_address() functions
2011-01-07Merge branch 'mce-for-linus' of ↵Linus Torvalds4-118/+359
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp * 'mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, MCE: Fix NB error formatting EDAC, MCE: Use BIT_64() to eliminate warnings on 32-bit EDAC, MCE: Enable MCE decoding on F15h EDAC, MCE: Allow F15h bank 6 MCE injection EDAC, MCE: Shorten error report formatting EDAC, MCE: Overhaul error fields extraction macros EDAC, MCE: Add F15h FP MCE decoder EDAC, MCE: Add F15 EX MCE decoder EDAC, MCE: Add an F15h NB MCE decoder EDAC, MCE: No F15h LS MCE decoder EDAC, MCE: Add F15h CU MCE decoder EDAC, MCE: Add F15h IC MCE decoder EDAC, MCE: Add F15h DC MCE decoder EDAC, MCE: Select extended error code mask
2011-01-07Merge branch 'edac-for-linus' of ↵Linus Torvalds10-598/+436
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp * 'edac-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Disable DRAM ECC injection on K8 EDAC: Fixup scrubrate manipulation amd64_edac: Remove two-stage initialization amd64_edac: Check ECC capabilities initially amd64_edac: Carve out ECC-related hw settings amd64_edac: Remove PCI ECS enabling functions amd64_edac: Remove explicit Kconfig PCI dependency amd64_edac: Allocate driver instances dynamically amd64_edac: Rework printk macros amd64_edac: Rename CPU PCI devices amd64_edac: Concentrate per-family init even more amd64_edac: Cleanup the CPU PCI device reservation amd64_edac: Simplify CPU family detection amd64_edac: Add per-family init function amd64_edac: Use cached extended CPU model amd64_edac: Remove F11h support
2011-01-07Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds95-1800/+2992
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (65 commits) [S390] prevent unneccesary loops_per_jiffy recalculation [S390] cpuinfo: use get_online_cpus() instead of preempt_disable() [S390] smp: remove cpu hotplug messages [S390] mutex: enable spinning mutex on s390 [S390] mutex: Introduce arch_mutex_cpu_relax() [S390] cio: fix ccwgroup unregistration race condition [S390] perf: add DWARF register lookup for s390 [S390] cleanup ftrace backend functions [S390] ptrace cleanup [S390] smp/idle: call init_idle() before starting a new cpu [S390] smp: delay idle task creation [S390] dasd: Correct retry counter for terminated I/O. [S390] dasd: Add support for raw ECKD access. [S390] dasd: Prevent deadlock during suspend/resume. [S390] dasd: Improve handling of stolen DASD reservation [S390] dasd: do path verification for paths added at runtime [S390] dasd: add High Performance FICON multitrack support [S390] cio: reduce memory consumption of itcw structures [S390] nmi: enable machine checks early [S390] qeth: buffer count imbalance ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 20:24:03 +0000