summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-02[libata] trivial: trim trailing whitespace for drivers/ata/*.[ch]Jeff Garzik9-14/+14
2011-03-02libsas: convert to libata new error handlerJames Bottomley3-8/+115
The conversion is quite complex given that the libata new error handler has to be hooked into the current libsas timeout and error handling. The way this is done is to process all the failed commands via libsas first, but if they have no underlying sas task (and they're on a sata device) assume they are destined for the libata error handler and send them accordingly. Finally, activate the port recovery of the libata error handler for each port known to the host. This is somewhat suboptimal, since that port may not need recovering, but given the current architecture of the libata error handler, it's the only way; and the spurious activation is harmless. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: separate error handler into usable componentsJames Bottomley2-9/+46
Right at the moment, the libata error handler is incredibly monolithic. This makes it impossible to use from composite drivers like libsas and ipr which have to handle error themselves in the first instance. The essence of the change is to split the monolithic error handler into two components: one which handles a queue of ata commands for processing and the other which handles the back end of readying a port. This allows the upper error handler fine grained control in calling libsas functions (and making sure they only get called for ATA commands whose lower errors have been fixed up). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: fix eh lockingJames Bottomley1-2/+7
The SCSI host eh_cmd_q should be protected by the host lock (not the port lock). This probably doesn't matter that much at the moment, since we try to serialise the add and eh pieces, but it might matter in future for more convenient error handling. Plus this switches libata to the standard eh pattern where you lock, remove from the cmd queue to a local list and unlock and then operate on the local list. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: fix locking for sas pathsJames Bottomley1-1/+1
For historical reasons, libsas uses the scsi host lock as the ata port lock, and libata always uses the ata host. For the old eh, this was largely irrelevant since the two locks were never mixed inside the code. However, the new eh has a case where it nests acquisition of the host lock inside the port lock (this does look rather deadlock prone). Obviously this would be an instant deadlock if the port lock were the host lock, so switch the libsas paths to use the ata host lock as well. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: plumb sas port scan into standard libata pathsJames Bottomley3-25/+24
The function ata_sas_port_init() has always really done its own thing. However, as a precursor to moving to the libata new eh, it has to be properly using the standard libata scan paths. This means separating the current libata scan paths into pieces which can be shared with libsas and pieces which cant (really just the async call and the host scan). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: fix hotplug for drivers which don't implement LPMTejun Heo1-1/+1
ata_eh_analyze_serror() suppresses hotplug notifications if LPM is being used because LPM generates spurious hotplug events. It compared whether link->lpm_policy was different from ATA_LPM_MAX_POWER to determine whether LPM is enabled; however, this is incorrect as for drivers which don't implement LPM, lpm_policy is always ATA_LPM_UNKNOWN. This disabled hotplug detection for all drivers which don't implement LPM. Fix it by comparing whether lpm_policy is greater than ATA_LPM_MAX_POWER. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-02-28Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (adt7411) add MODULE_DEVICE_TABLE hwmon: (ad7414) add MODULE_DEVICE_TABLE
2011-02-28fs/block_dev.c: fix new kernel-doc warningRandy Dunlap1-0/+1
Fix new kernel-doc warning in fs/block_dev.c: Warning(fs/block_dev.c:937): No description found for parameter 'kill_dirty' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28ACPI: Fix build for CONFIG_NET unsetRafael J. Wysocki3-20/+29
Several ACPI drivers fail to build if CONFIG_NET is unset, because they refer to things depending on CONFIG_THERMAL that in turn depends on CONFIG_NET. However, CONFIG_THERMAL doesn't really need to depend on CONFIG_NET, because the only part of it requiring CONFIG_NET is the netlink interface in thermal_sys.c. Put the netlink interface in thermal_sys.c under #ifdef CONFIG_NET and remove the dependency of CONFIG_THERMAL on CONFIG_NET from drivers/thermal/Kconfig. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Len Brown <lenb@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Luming Yu <luming.yu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28Merge branch 'drm-fixes' of ↵Linus Torvalds3-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: fix unsigned vs signed comparison issue in modeset ctl ioctl. drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
2011-02-28Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds8-15/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap4: prcm: Fix the CPUx clockdomain offsets OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL OMAP2+: mailbox: fix lookups for multiple mailboxes OMAP2420: mailbox: fix IVA vs DSP IRQ numbering mach-omap2: smartreflex: world-writable debugfs voltage files mach-omap2: pm: world-writable debugfs timer files mach-omap2: mux: world-writable debugfs files
2011-02-28Merge branches 'perf-fixes-for-linus', 'x86-fixes-for-linus' and ↵Linus Torvalds7-10/+30
'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf timechart: Fix max number of cpus perf timechart: Fix black idle boxes in the title perf hists: Print number of samples, not the period sum * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Use u32 instead of long to set reset vector back to 0 * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clockevents: Prevent oneshot mode when broadcast device is periodic
2011-02-28Merge branch 'for-linus' of ↵Linus Torvalds3-10/+55
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix truncate after open fuse: fix hang of single threaded fuseblk filesystem
2011-02-28Merge branch 'upstream-linus' of ↵Linus Torvalds3-13/+28
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Check heartbeat mode for kernel stacks only Ocfs2/refcounttree: Fix a bug for refcounttree to writeback clusters in a right number. ocfs2: Fix estimate of necessary credits for mkdir
2011-02-28Merge branch 'for-linus' of ↵Linus Torvalds19-27/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: eukrea-tlv320: fix platform_name ASoC: correct pxa AC97 DAI names ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecs ALSA: HDA: Add ideapad quirk for two Dell machines ALSA: HDA: Add a new Conexant codec 506e (20590) ALSA: usb-audio: fix oops due to cleanup race when disconnecting ASoC: Hook wm_hubs micbiases up to CLK_SYS ASoC: Correct definition of WM8903_VMID_RES_5K ASoC: Fix WM8958 default microphone detection argument ordering ALSA: HDA: Fix mic initialization in VIA auto parser ALSA: fix one memory leak in sound jack
2011-02-28mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>Ben Hutchings1-0/+2
Commit e2cda3226481 ("thp: add pmd mangling generic functions") replaced some macros in <asm-generic/pgtable.h> with inline functions. If the functions are to be defined (not all architectures need them) then struct vm_area_struct must be defined first. So include <linux/mm_types.h>. Fixes a build failure seen in Debian: CC [M] drivers/media/dvb/mantis/mantis_pci.o In file included from arch/arm/include/asm/pgtable.h:460, from drivers/media/dvb/mantis/mantis_pci.c:25: include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young': include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28x86: Use u32 instead of long to set reset vector back to 0Don Zickus1-1/+1
A customer of ours, complained that when setting the reset vector back to 0, it trashed other data and hung their box. They noticed when only 4 bytes were set to 0 instead of 8, everything worked correctly. Mathew pointed out: | | We're supposed to be resetting trampoline_phys_low and | trampoline_phys_high here, which are two 16-bit values. | Writing 64 bits is definitely going to overwrite space | that we're not supposed to be touching. | So limit the area modified to u32. Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Matthew Garrett <mjg@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28perf timechart: Fix max number of cpusThomas Renninger1-3/+3
Currently numcpus is determined in pid_put_sample which is only called on sched_switch/sched_wakeup sample processing. On a machine with a lot cpus I often saw the last cpu missing. Check for (max) numcpus on every event happening and in the beginning. -> fixes the issue for me. Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: lenb@kernel.org LKML-Reference: <1298842606-55712-6-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28perf timechart: Fix black idle boxes in the titleThomas Renninger1-3/+3
This fix is needed for eye of gnome and firefox svg viewers. Only Inkscape can handle the broken case. Compare with the other svg_legenda_box declarations, looks like a typo slipped in at this place. Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: lenb@kernel.org LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next ↵Dave Airlie1-1/+4
into drm-fixes * 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next: drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
2011-02-28drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.Dave Airlie2-2/+3
This fixes CVE-2011-1013. Reported-by: Matthiew Herrb (OpenBSD X.org team) Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-28drm/nv50-nvc0: make sure vma is definitely unmapped when destroying boBen Skeggs1-1/+4
Somehow fixes a misrendering + hang at GDM startup on my NVA8... My first guess would have been stale TLB entries laying around that a new bo then accidentally inherits. That doesn't make a great deal of sense however, as when we mapped the pages for the new bo the TLBs would've gotten flushed anyway. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-26hwmon: (adt7411) add MODULE_DEVICE_TABLEaxel lin1-0/+1
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-26hwmon: (ad7414) add MODULE_DEVICE_TABLEaxel lin1-0/+1
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-26Merge branch 'fix/asoc' into for-linusTakashi Iwai16-45/+233
2011-02-26clockevents: Prevent oneshot mode when broadcast device is periodicThomas Gleixner3-1/+18
When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only can switch into oneshot mode, when the backup broadcast device supports oneshot mode as well. Otherwise we would try to switch the broadcast device into an unsupported mode unconditionally. This went unnoticed so far as the current available broadcast devices support oneshot mode. Seth unearthed this problem while debugging and working around an hpet related BIOS wreckage. Add the necessary check to tick_is_oneshot_available(). Reported-and-tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <alpine.LFD.2.00.1102252231200.2701@localhost6.localdomain6> Cc: stable@kernel.org # .21 ->
2011-02-25Merge branch 'pm-fixes' of ↵Linus Torvalds2-11/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Make ACPI wakeup from S5 work again when CONFIG_PM_SLEEP is unset
2011-02-25rapidio: fix sysfs config attribute to access 16MB of maint spaceAlexandre Bounine2-7/+9
Fixes sysfs config attribute to allow access to entire 16MB maintenance space of RapidIO devices. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25pps: initialize ts_real properlyAlexander Gordeev1-1/+1
Initialize ts_real.flags to fix compiler warning about possible uninitialized use of this field. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: john stultz <johnstul@us.ibm.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25memcg: more mem_cgroup_uncharge() batchingHugh Dickins1-0/+2
It seems odd that truncate_inode_pages_range(), called not only when truncating but also when evicting inodes, has mem_cgroup_uncharge_start and _end() batching in its second loop to clear up a few leftovers, but not in its first loop that does almost all the work: add them there too. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25thp: fix interleaving for transparent hugepagesAndi Kleen1-1/+1
The THP code didn't pass the correct interleaving shift to the memory policy code. Fix this here by adjusting for the order. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Christoph Lameter <cl@linux.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25aio: fix race between io_destroy() and io_submit()Jan Kara1-0/+17
A race can occur when io_submit() races with io_destroy(): CPU1 CPU2 io_submit() do_io_submit() ... ctx = lookup_ioctx(ctx_id); io_destroy() Now do_io_submit() holds the last reference to ctx. ... queue new AIO put_ioctx(ctx) - frees ctx with active AIOs We solve this issue by checking whether ctx is being destroyed in AIO submission path after adding new AIO to ctx. Then we are guaranteed that either io_destroy() waits for new AIO or we see that ctx is being destroyed and bail out. Cc: Nick Piggin <npiggin@kernel.dk> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25aio: fix rcu ioctx lookupNick Piggin1-11/+24
aio-dio-invalidate-failure GPFs in aio_put_req from io_submit. lookup_ioctx doesn't implement the rcu lookup pattern properly. rcu_read_lock does not prevent refcount going to zero, so we might take a refcount on a zero count ioctx. Fix the bug by atomically testing for zero refcount before incrementing. [jack@suse.cz: added comment into the code] Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25mm: fix dubious code in __count_immobile_pages()Namhyung Kim1-3/+2
When pfn_valid_within() failed 'iter' was incremented twice. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25drivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chipLei Xu1-5/+9
In linux rtc_time struct, tm_mon range is 0~11, tm_wday range is 0~6, while in RTC HW REG, month range is 1~12, day of the week range is 1~7, this patch adjusts difference of them. The efect of this bug was that most of month will be operated on as the next month by the hardware (When in Jan it maybe even worse). For example, if in May, software wrote 4 to the hardware, which handled it as April. Then the logic would be different between software and hardware, which would cause weird things to happen. Signed-off-by: Lei Xu <B33228@freescale.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: john stultz <johnstul@us.ibm.com> Cc: Jack Lan <jack.lan@freescale.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25ldm: corrupted partition table can cause kernel oopsTimo Warns1-0/+5
The kernel automatically evaluates partition tables of storage devices. The code for evaluating LDM partitions (in fs/partitions/ldm.c) contains a bug that causes a kernel oops on certain corrupted LDM partitions. A kernel subsystem seems to crash, because, after the oops, the kernel no longer recognizes newly connected storage devices. The patch changes ldm_parse_vmdb() to Validate the value of vblk_size. Signed-off-by: Timo Warns <warns@pre-sense.de> Cc: Eugene Teo <eugeneteo@kernel.sg> Acked-by: Richard Russon <ldm@flatcap.org> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25mm: vmscan: stop reclaim/compaction earlier due to insufficient progress if ↵Mel Gorman1-10/+22
!__GFP_REPEAT should_continue_reclaim() for reclaim/compaction allows scanning to continue even if pages are not being reclaimed until the full list is scanned. In terms of allocation success, this makes sense but potentially it introduces unwanted latency for high-order allocations such as transparent hugepages and network jumbo frames that would prefer to fail the allocation attempt and fallback to order-0 pages. Worse, there is a potential that the full LRU scan will clear all the young bits, distort page aging information and potentially push pages into swap that would have otherwise remained resident. This patch will stop reclaim/compaction if no pages were reclaimed in the last SWAP_CLUSTER_MAX pages that were considered. For allocations such as hugetlbfs that use __GFP_REPEAT and have fewer fallback options, the full LRU list may still be scanned. Order-0 allocation should not be affected because RECLAIM_MODE_COMPACTION is not set so the following avoids the gfp_mask being examined: if (!(sc->reclaim_mode & RECLAIM_MODE_COMPACTION)) return false; A tool was developed based on ftrace that tracked the latency of high-order allocations while transparent hugepage support was enabled and three benchmarks were run. The "fix-infinite" figures are 2.6.38-rc4 with Johannes's patch "vmscan: fix zone shrinking exit when scan work is done" applied. STREAM Highorder Allocation Latency Statistics fix-infinite break-early 1 :: Count 10298 10229 1 :: Min 0.4560 0.4640 1 :: Mean 1.0589 1.0183 1 :: Max 14.5990 11.7510 1 :: Stddev 0.5208 0.4719 2 :: Count 2 1 2 :: Min 1.8610 3.7240 2 :: Mean 3.4325 3.7240 2 :: Max 5.0040 3.7240 2 :: Stddev 1.5715 0.0000 9 :: Count 111696 111694 9 :: Min 0.5230 0.4110 9 :: Mean 10.5831 10.5718 9 :: Max 38.4480 43.2900 9 :: Stddev 1.1147 1.1325 Mean time for order-1 allocations is reduced. order-2 looks increased but with so few allocations, it's not particularly significant. THP mean allocation latency is also reduced. That said, allocation time varies so significantly that the reductions are within noise. Max allocation time is reduced by a significant amount for low-order allocations but reduced for THP allocations which presumably are now breaking before reclaim has done enough work. SysBench Highorder Allocation Latency Statistics fix-infinite break-early 1 :: Count 15745 15677 1 :: Min 0.4250 0.4550 1 :: Mean 1.1023 1.0810 1 :: Max 14.4590 10.8220 1 :: Stddev 0.5117 0.5100 2 :: Count 1 1 2 :: Min 3.0040 2.1530 2 :: Mean 3.0040 2.1530 2 :: Max 3.0040 2.1530 2 :: Stddev 0.0000 0.0000 9 :: Count 2017 1931 9 :: Min 0.4980 0.7480 9 :: Mean 10.4717 10.3840 9 :: Max 24.9460 26.2500 9 :: Stddev 1.1726 1.1966 Again, mean time for order-1 allocations is reduced while order-2 allocations are too few to draw conclusions from. The mean time for THP allocations is also slightly reduced albeit the reductions are within varianes. Once again, our maximum allocation time is significantly reduced for low-order allocations and slightly increased for THP allocations. Anon stream mmap reference Highorder Allocation Latency Statistics 1 :: Count 1376 1790 1 :: Min 0.4940 0.5010 1 :: Mean 1.0289 0.9732 1 :: Max 6.2670 4.2540 1 :: Stddev 0.4142 0.2785 2 :: Count 1 - 2 :: Min 1.9060 - 2 :: Mean 1.9060 - 2 :: Max 1.9060 - 2 :: Stddev 0.0000 - 9 :: Count 11266 11257 9 :: Min 0.4990 0.4940 9 :: Mean 27250.4669 24256.1919 9 :: Max 11439211.0000 6008885.0000 9 :: Stddev 226427.4624 186298.1430 This benchmark creates one thread per CPU which references an amount of anonymous memory 1.5 times the size of physical RAM. This pounds swap quite heavily and is intended to exercise THP a bit. Mean allocation time for order-1 is reduced as before. It's also reduced for THP allocations but the variations here are pretty massive due to swap. As before, maximum allocation times are significantly reduced. Overall, the patch reduces the mean and maximum allocation latencies for the smaller high-order allocations. This was with Slab configured so it would be expected to be more significant with Slub which uses these size allocations more aggressively. The mean allocation times for THP allocations are also slightly reduced. The maximum latency was slightly increased as predicted by the comments due to reclaim/compaction breaking early. However, workloads care more about the latency of lower-order allocations than THP so it's an acceptable trade-off. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25drivers/nfc/pn544.c: add missing regulatorMatti J. Aaltonen1-1/+3
The regulator framework is used for power management. The regulators are only named in the driver code, the actual control stuff is in the board file for each architecture or use case. The PN544 chip has three regulators that can be controlled or not - depending on the architecture where the chip is being used. So some of the regulators may not be controllable. In our current case the third regulator, which was missing from the code, went unnoticed because we didn't need to control it. To be as general as possible - in this respect - the driver needs to list all regulators. Then the board file can be used to actually set the usage. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25drivers/nfc/Kconfig: use full form of the NFC acronymMatti J. Aaltonen1-1/+1
Spell out the NFC acronym when it's shown for the first time. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25swiotlb: fix wrong panicFUJITA Tomonori1-2/+4
swiotlb's map_page wrongly calls panic() when it can't find a buffer fit for device's dma mask. It should return an error instead. Devices with an odd dma mask (i.e. under 4G) like b44 network card hit this bug (the system crashes): http://marc.info/?l=linux-kernel&m=129648943830106&w=2 If swiotlb returns an error, b44 driver can use the own bouncing mechanism. Reported-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25MAINTAINERS: add Chinese documentation maintainerHarry Wei1-0/+7
I have translated some kernel documentation so I wish to maintain the Chinese documentation in our kernel directories. Signed-off-by: Harry Wei <harryxiyou@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25mm: grab rcu read lock in move_pages()Greg Thelen1-3/+3
The move_pages() usage of find_task_by_vpid() requires rcu_read_lock() to prevent free_pid() from reclaiming the pid. Without this patch, RCU warnings are printed in v2.6.38-rc4 move_pages() with: CONFIG_LOCKUP_DETECTOR=y CONFIG_PREEMPT=y CONFIG_LOCKDEP=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RCU=y Previously, migrate_pages() went through a similar transformation replacing usage of tasklist_lock with rcu read lock: commit 55cfaa3cbdd29c4919ecb5fb8965c310f357e48c Author: Zeng Zhaoming <zengzm.kernel@gmail.com> Date: Thu Dec 2 14:31:13 2010 -0800 mm/mempolicy.c: add rcu read lock to protect pid structure commit 1e50df39f6e2c3a4a3394df62baa8a213df16c54 Author: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Date: Thu Jan 13 15:46:14 2011 -0800 mempolicy: remove tasklist_lock from migrate_pages Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Zeng Zhaoming <zengzm.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25epoll: prevent creating circular epoll structuresDavide Libenzi1-0/+95
In several places, an epoll fd can call another file's ->f_op->poll() method with ep->mtx held. This is in general unsafe, because that other file could itself be an epoll fd that contains the original epoll fd. The code defends against this possibility in its own ->poll() method using ep_call_nested, but there are several other unsafe calls to ->poll elsewhere that can be made to deadlock. For example, the following simple program causes the call in ep_insert recursively call the original fd's ->poll, leading to deadlock: #include <unistd.h> #include <sys/epoll.h> int main(void) { int e1, e2, p[2]; struct epoll_event evt = { .events = EPOLLIN }; e1 = epoll_create(1); e2 = epoll_create(2); pipe(p); epoll_ctl(e2, EPOLL_CTL_ADD, e1, &evt); epoll_ctl(e1, EPOLL_CTL_ADD, p[0], &evt); write(p[1], p, sizeof p); epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt); return 0; } On insertion, check whether the inserted file is itself a struct epoll, and if so, do a recursive walk to detect whether inserting this file would create a loop of epoll structures, which could lead to deadlock. [nelhage@ksplice.com: Use epmutex to serialize concurrent inserts] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Reported-by: Nelson Elhage <nelhage@ksplice.com> Tested-by: Nelson Elhage <nelhage@ksplice.com> Cc: <stable@kernel.org> [2.6.34+, possibly earlier] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25Merge branch 'for-linus' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator, mc13xxx: Remove pointless test for unsigned less than zero regulator: Fix warning with CONFIG_BUG disabled
2011-02-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds10-57/+282
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix fiemap bugs with delalloc Btrfs: set FMODE_EXCL in btrfs_device->mode Btrfs: make btrfs_rm_device() fail gracefully Btrfs: Avoid accessing unmapped kernel address Btrfs: Fix BTRFS_IOC_SUBVOL_SETFLAGS ioctl Btrfs: allow balance to explicitly allocate chunks as it relocates Btrfs: put ENOSPC debugging under a mount option
2011-02-25Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds5-14/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems x86/mrst: Fix apb timer rating when lapic timer is used x86: Fix reboot problem on VersaLogic Menlow boards
2011-02-25RTC: fix typo in drivers/rtc/rtc-at91sam9.cJelle Martijn Kok1-1/+1
The member of the rtc_class_ops struct is called alarm_irq_enable and not alarm_irq_enabled CC: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jelle Martijn Kok <jmkok@youcom.nl> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25Merge branch 'patches_for_2.6.38rc' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren974-8137/+12677
devel-fixes
2011-02-25omap4: prcm: Fix the CPUx clockdomain offsetsSantosh Shilimkar1-2/+2
CPU0 and CPU1 clockdomain is at the offset of 0x18 from the LPRM base. The header file has set it wrongly to 0x0. Offset 0x0 is for CPUx power domain control register Fix the same. The autogen scripts is fixed thanks to Benoit Cousson With the old value, the clockdomain code would access the *_PWRSTCTRL.POWERSTATE field when it thought it was accessing the *_CLKSTCTRL.CLKTRCTRL field. In the worst case, this could cause system power management to behave incorrectly. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: added second paragraph to commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 22:22:03 +0000