| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This enhancement auto loads transport module when the transport
is set via SO_RDS_TRANSPORT socket option.
Reviewed-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Toke Høiland-Jørgensen says:
====================
sched: A couple of fixes for sch_cake
This series contains a couple of fixes for diffserv handling in sch_cake that
provide a nice speedup (with a somewhat pedantic nit fix tacked on to the end).
Not quite sure about whether this should go to stable; it does provide a nice
speedup, but it's not strictly a fix in the "correctness" sense. I lean towards
including this in stable as well, since our most important consumer of that
(OpenWrt) is likely to backport the series anyway.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I spotted a few nits when comparing the in-tree version of sch_cake with
the out-of-tree one: A redundant error variable declaration shadowing an
outer declaration, and an indentation alignment issue. Fix both of these.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As a further optimisation of the diffserv parsing codepath, we can skip it
entirely if CAKE is configured to neither use diffserv-based
classification, nor to zero out the diffserv bits.
Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cake_handle_diffserv() tries to linearize mac and network header parts of
skb and to make it writable unconditionally. In some cases it leads to full
skb reallocation, which reduces throughput and increases CPU load. Some
measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core
CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable()
reallocates skb, if skb was allocated in ethernet driver via so-called
'build skb' method from page cache (it was discovered by strange increase
of kmalloc-2048 slab at first).
Obtain DSCP value via read-only skb_header_pointer() call, and leave
linearization only for DSCP bleaching or ECN CE setting. And, as an
additional optimisation, skip diffserv parsing entirely if it is not needed
by the current configuration.
Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
[ fix a few style issues, reflow commit message ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When getting SQI or maximum SQI value fails in linkstate_prepare_data(), we
must not return without calling ethnl_ops_complete(dev) as that could
result in imbalance between ethtool_ops ->begin() and ->complete() calls.
Fixes: 806602191592 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jason A. Donenfeld says:
====================
napi_gro_receive caller return value cleanups
In 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in
napi_gro_receive()"), the GRO_NORMAL case stopped calling
netif_receive_skb_internal, checking its return value, and returning
GRO_DROP in case it failed. Instead, it calls into
netif_receive_skb_list_internal (after a bit of indirection), which
doesn't return any error. Therefore, napi_gro_receive will never return
GRO_DROP, making handling GRO_DROP dead code.
I emailed the author of 6570bc79c0df on netdev [1] to see if this change
was intentional, but the dlink.ru email address has been disconnected,
and looking a bit further myself, it seems somewhat infeasible to start
propagating return values backwards from the internal machinations of
netif_receive_skb_list_internal.
Taking a look at all the callers of napi_gro_receive, it appears that
three are checking the return value for the purpose of comparing it to
the now never-happening GRO_DROP, and one just casts it to (void), a
likely historical leftover. Every other of the 120 callers does not
bother checking the return value.
And it seems like these remaining 116 callers are doing the right thing:
after calling napi_gro_receive, the packet is now in the hands of the
upper layers of the newtworking, and the device driver itself has no
business now making decisions based on what the upper layers choose to
do. Incrementing stats counters on GRO_DROP seems like a mistake, made
by these three drivers, but not by the remaining 117.
It would seem, therefore, that after rectifying these four callers of
napi_gro_receive, that I should go ahead and just remove returning the
value from napi_gro_receive all together. However, napi_gro_receive has
a function event tracer, and being able to introspect into the
networking stack to see how often napi_gro_receive is returning whatever
interesting GRO status (aside from _DROP) remains an interesting
data point worth keeping for debugging.
So, this series simply gets rid of the return value checking for the
four useless places where that check never evaluates to anything
meaningful.
[1] https://lore.kernel.org/netdev/20200624210606.GA1362687@zx2c4.com/
====================
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands. In this case, too, the non-gro path didn't bother checking
the return value. Plus, this had some clunky debugging functions that
duplicated code from elsewhere and was generally pretty messy. So, this
commit cleans that all up too.
Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Basically no drivers care about the return value here, and there's no
__must_check that would make casting to void sensible, so remove it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.
Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes last saved fdb index in fdb dump handler when
handling fdb's with nhid.
Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a socket is set ipv6only, it will still send IPv4 addresses in the
INIT and INIT_ACK packets. This potentially misleads the peer into using
them, which then would cause association termination.
The fix is to not add IPv4 addresses to ipv6only sockets.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update odd length cookie hexstrings in csum.json, tunnel_key.json and
bpf.json to be even length to comply with check enforced in commit
0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2.
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Neal Cardwell says:
====================
tcp_cubic: fix spurious HYSTART_DELAY on RTT decrease
This series fixes a long-standing bug in the TCP CUBIC
HYSTART_DELAY mechanim recently reported by Mirja Kuehlewind. The
code can cause a spurious exit of slow start in some particular
cases: upon an RTT decrease that happens on the 9th or later ACK
in a round trip. This series fixes the original Hystart code and
also the recent BPF implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Apply the fix from:
"tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT"
to the BPF implementation of TCP CUBIC congestion control.
Repeating the commit description here for completeness:
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: 6de4a9c430b5 ("bpf: tcp: Add bpf_cubic example")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
Fixes for SJA1105 DSA tc-gate action
This small series fixes 2 bugs in the tc-gate implementation:
1. The TAS state machine keeps getting rescheduled even after removing
tc-gate actions on all ports.
2. tc-gate actions with only one gate control list entry are installed
to hardware with an incorrect interval of zero, which makes the
switch erroneously drop those packets (since the configuration is
invalid).
To keep the code palatable, a forward-declaration was avoided by moving
some code around in patch 1/4. I hope that isn't too much of an issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sja1105_gating_cfg_time_to_interval function does this, as per the
comments:
/* The gate entries contain absolute times in their e->interval field. Convert
* that to proper intervals (i.e. "0, 5, 10, 15" to "5, 5, 5, 5").
*/
To perform that task, it iterates over gating_cfg->entries, at each step
updating the interval of the _previous_ entry. So one interval remains
to be updated at the end of the loop: the last one (since it isn't
"prev" for anyone else).
But there was an erroneous check, that the last element's interval
should not be updated if it's also the only element. I'm not quite sure
why that check was there, but it's clearly incorrect, as a tc-gate
schedule with a single element would get an e->interval of zero,
regardless of the duration requested by the user. The switch wouldn't
even consider this configuration as valid: it will just drop all traffic
that matches the rule.
Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, tas_data->enabled would remain true even after deleting all
tc-gate rules from the switch ports, which would cause the
sja1105_tas_state_machine to get unnecessarily scheduled.
Also, if there were any errors which would prevent the hardware from
enabling the gating schedule, the sja1105_tas_state_machine would
continuously detect and print that, spamming the kernel log, even if the
rules were subsequently deleted.
The rules themselves are _not_ active, because sja1105_init_scheduling
does enough of a job to not install the gating schedule in the static
config. But the virtual link rules themselves are still present.
So call the functions that remove the tc-gate configuration from
priv->tas_data.gating_cfg, so that tas_data->enabled can be set to
false, and sja1105_tas_state_machine will stop from being scheduled.
Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently sja1105_compose_gating_subschedule is not prepared to be
called for the case where we want to recompute the global tc-gate
configuration after we've deleted those actions on a port.
After deleting the tc-gate actions on the last port, max_cycle_time
would become zero, and that would incorrectly prevent
sja1105_free_gating_config from getting called.
So move the freeing function above the check for the need to apply a new
configuration.
Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It turns out that sja1105_compose_gating_subschedule must also be called
from sja1105_vl_delete, to recalculate the overall tc-gate
configuration. Currently this is not possible without introducing a
forward declaration. So move the function at the top of the file, along
with its dependencies.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DMA buffers were not freed on failure path of at91ether_open().
Along with changes for freeing the DMA buffers the enable/disable
interrupt instructions were moved to at91ether_start()/at91ether_stop()
functions and the operations on at91ether_stop() were done in
their reverse order (compared with how is done in at91ether_start()):
before this patch the operation order on interface open path
was as follows:
1/ alloc DMA buffers
2/ enable tx, rx
3/ enable interrupts
and the order on interface close path was as follows:
1/ disable tx, rx
2/ disable interrupts
3/ free dma buffers.
Fixes: 7897b071ac3b ("net: macb: convert to phylink")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Call pm_runtime_put_sync() on failure path of at91ether_open.
Fixes: e6a41c23df0d ("net: macb: ensure interface is not suspended on at91rm9200")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net, they are:
1) Unaligned atomic access in ipset, from Russell King.
2) Missing module description, from Rob Gill.
3) Patches to fix a module unload causing NULL pointer dereference in
xtables, from David Wilder. For the record, I posting here his cover
letter explaining the problem:
A crash happened on ppc64le when running ltp network tests triggered by
"rmmod iptable_mangle".
See previous discussion in this thread:
https://lists.openwall.net/netdev/2020/06/03/161 .
In the crash I found in iptable_mangle_hook() that
state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference.
net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and
called when ip_mangle modules is unloaded. A rmmod task was found running
in the crash dump. A 2nd crash showed the same problem when running
"rmmod iptable_filter" (net->ipv4.iptable_filter=NULL).
To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will
un-register the underlying hook and exit would do the table freeing. The
netns core does an unconditional +synchronize_rcu after the pre_exit hooks
insuring no packets are in flight that have picked up the pointer before
completing the un-register.
These patches include changes for both iptables and ip6tables.
We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a
loop for 72 hours.
4) Add a selftest for conntrack helper assignment, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The eth_addr member is passed to ether_addr functions that require
2-byte alignment, therefore the member must be properly aligned
to avoid unaligned accesses.
The problem is in place since the initial merge of multicast to unicast:
commit 6db6f0eae6052b70885562e1733896647ec1d807 bridge: multicast to unicast
Fixes: 6db6f0eae605 ("bridge: multicast to unicast")
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Thomas Martitz <t.martitz@avm.de>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
there is a problem with the CWR flag set in an incoming ACK segment
and it leads to the situation when the ECE flag is latched forever
the following packetdrill script shows what happens:
// Stack receives incoming segments with CE set
+0.1 <[ect0] . 11001:12001(1000) ack 1001 win 65535
+0.0 <[ce] . 12001:13001(1000) ack 1001 win 65535
+0.0 <[ect0] P. 13001:14001(1000) ack 1001 win 65535
// Stack repsonds with ECN ECHO
+0.0 >[noecn] . 1001:1001(0) ack 12001
+0.0 >[noecn] E. 1001:1001(0) ack 13001
+0.0 >[noecn] E. 1001:1001(0) ack 14001
// Write a packet
+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0] PE. 1001:2001(1000) ack 14001
// Pure ACK received
+0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535
// Since CWR was sent, this packet should NOT have ECE set
+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0] P. 2001:3001(1000) ack 14001
// but Linux will still keep ECE latched here, with packetdrill
// flagging a missing ECE flag, expecting
// >[ect0] PE. 2001:3001(1000) ack 14001
// in the script
In the situation above we will continue to send ECN ECHO packets
and trigger the peer to reduce the congestion window. To avoid that
we can check CWR on pure ACKs received.
v3:
- Add a sequence check to avoid sending an ACK to an ACK
v2:
- Adjusted the comment
- move CWR check before checking for unacknowledged packets
Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The skcipher API dynamically instantiates the transformation object
on request that implements the requested algorithm optimally on the
given platform. This notion of optimality only matters for cases like
bulk network or disk encryption, where performance can be a bottleneck,
or in cases where the algorithm itself is not known at compile time.
In the mscc case, we are dealing with AES encryption of a single
block, and so neither concern applies, and we are better off using
the AES library interface, which is lightweight and safe for this
kind of use.
Note that the scatterlist API does not permit references to buffers
that are located on the stack, so the existing code is incorrect in
any case, but avoiding the skcipher and scatterlist APIs entirely is
the most straight-forward approach to fixing this.
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Fixes: 28c5107aa904e ("net: phy: mscc: macsec support")
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Doug Berger says:
====================
net: bcmgenet: use hardware padding of runt frames
Now that scatter-gather and tx-checksumming are enabled by default
it revealed a packet corruption issue that can occur for very short
fragmented packets.
When padding these frames to the minimum length it is possible for
the non-linear (fragment) data to be added to the end of the linear
header in an SKB. Since the number of fragments is read before the
padding and used afterward without reloading, the fragment that
should have been consumed can be tacked on in place of part of the
padding.
The third commit in this set corrects this by removing the software
padding and allowing the hardware to add the pad bytes if necessary.
The first two commits resolve warnings observed by the kbuild test
robot and are included here for simplicity of application.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When commit 474ea9cafc45 ("net: bcmgenet: correctly pad short
packets") added the call to skb_padto() it should have been
located before the nr_frags parameter was read since that value
could be changed when padding packets with lengths between 55
and 59 bytes (inclusive).
The use of a stale nr_frags value can cause corruption of the
pad data when tx-scatter-gather is enabled. This corruption of
the pad can cause invalid checksum computation when hardware
offload of tx-checksum is also enabled.
Since the original reason for the padding was corrected by
commit 7dd399130efb ("net: bcmgenet: fix skb_len in
bcmgenet_xmit_single()") we can remove the software padding all
together and make use of hardware padding of short frames as
long as the hardware also always appends the FCS value to the
frame.
Fixes: 474ea9cafc45 ("net: bcmgenet: correctly pad short packets")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 16-bit value that holds a short in network byte order should
be declared as a restricted big endian type to allow type checks
to succeed during assignment.
Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function was originally removed by Baoyou Xie in
commit e2072600a241 ("net: bcmgenet: remove unused function in
bcmgenet.c") to prevent a build warning.
Some of the functions removed by Baoyou Xie are now used for
WAKE_FILTER support so his commit was reverted, but this function
is still unused and the kbuild test robot dutifully reported the
warning.
This commit once again removes the remaining unused hfb functions.
Fixes: 14da1510fedc ("Revert "net: bcmgenet: remove unused function in bcmgenet.c"")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
check that 'nft ... ct helper set <foo>' works:
1. configure ftp helper via nft and assign it to
connections on port 2121
2. check with 'conntrack -L' that the next connection
has the ftp helper attached to it.
Also add a test for auto-assign (old behaviour).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Using new helpers ip6t_unregister_table_pre_exit() and
ip6t_unregister_table_exit().
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
helpers.
The pre_exit will un-register the underlying hook and .exit will do
the table freeing. The netns core does an unconditional synchronize_rcu
after the pre_exit hooks insuring no packets are in flight that have
picked up the pointer before completing the un-register.
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Using new helpers ipt_unregister_table_pre_exit() and
ipt_unregister_table_exit().
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
helpers.
The pre_exit will un-register the underlying hook and .exit will do the
table freeing. The netns core does an unconditional synchronize_rcu after
the pre_exit hooks insuring no packets are in flight that have picked up
the pointer before completing the un-register.
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The user tool modinfo is used to get information on kernel modules, including a
description where it is available.
This patch adds a brief MODULE_DESCRIPTION to netfilter kernel modules
(descriptions taken from Kconfig file or code comments)
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When using ip_set with counters and comment, traffic causes the kernel
to panic on 32-bit ARM:
Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>]
Unhandled fault: alignment exception (0x221) at 0xea08133c
PC is at ip_set_match_extensions+0xe0/0x224 [ip_set]
The problem occurs when we try to update the 64-bit counters - the
faulting address above is not 64-bit aligned. The problem occurs
due to the way elements are allocated, for example:
set->dsize = ip_set_elem_len(set, tb, 0, 0);
map = ip_set_alloc(sizeof(*map) + elements * set->dsize);
If the element has a requirement for a member to be 64-bit aligned,
and set->dsize is not a multiple of 8, but is a multiple of four,
then every odd numbered elements will be misaligned - and hitting
an atomic64_add() on that element will cause the kernel to panic.
ip_set_elem_len() must return a size that is rounded to the maximum
alignment of any extension field stored in the element. This change
ensures that is the case.
Fixes: 95ad1f4a9358 ("netfilter: ipset: Fix extension alignment")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum
enum dbg_status however there is a missing corresponding entry for
this in the array s_status_str. This causes an out-of-bounds read when
indexing into the last entry of s_status_str. Fix this by adding in
the missing entry.
Addresses-Coverity: ("Out-of-bounds read").
Fixes: 2d22bc8354b1 ("qed: FW 8.42.2.0 debug features")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jisheng Zhang says:
====================
net: phy: call phy_disable_interrupts() in phy_init_hw()
We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.
As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."
patch1 makes phy_disable_interrupts() non-static so that it could be used
in phy_init_hw() to have a defined init state.
patch2 calls phy_disable_interrupts() in phy_init_hw() to have a
defined init state.
Since v3:
- call phy_disable_interrupts() have interrupts disabled first then
config_init, thank Florian
Since v2:
- Don't export phy_disable_interrupts() but just make it non-static
Since v1:
- EXPORT the correct symbol
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Call phy_disable_interrupts() in phy_init_hw() to "have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state." as pointed
out by Heiner.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.
As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."
Make phy_disable_interrupts() non-static so that it could be used in
phy_init_hw() to have a defined init state.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When writing the serdes configuration register was moved to
mvneta_config_interface() the whole code block was removed from
mvneta_port_power_up() in the assumption that its only purpose was to
write the serdes configuration register. As mentioned by Russell King
its purpose was also to check for valid interface modes early so that
later in the driver we do not have to care for unexpected interface
modes.
Add back the test to let the driver bail out early on unhandled
interface modes.
Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In mvneta_config_interface() the RGMII modes are catched by the default
case which is an error return. The RGMII modes are valid modes for the
driver, so instead of returning an error add a break statement to return
successfully.
This avoids this warning for non comphy SoCs which use RGMII, like
SolidRun Clearfog:
WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c
Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver for Marvell switches puts all ports in IGMP snooping mode
which results in all IGMP/MLD frames that ingress on the ports to be
forwarded to the CPU only.
The bridge code in the kernel can then interpret these frames and act
upon them, for instance by updating the mdb in the switch to reflect
multicast memberships of stations connected to the ports. However,
the IGMP/MLD frames must then also be forwarded to other ports of the
bridge so external IGMP queriers can track membership reports, and
external multicast clients can receive query reports from foreign IGMP
queriers.
Currently, this is impossible as the EDSA tagger sets offload_fwd_mark
on the skb when it unwraps the tagged frames, and that will make the
switchdev layer prevent the skb from egressing on any other port of
the same switch.
To fix that, look at the To_CPU code in the DSA header and make
forwarding of the frame possible for trapped IGMP packets.
Introduce some #defines for the frame types to make the code a bit more
comprehensive.
This was tested on a Marvell 88E6352 variant.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
execute_check_pkt_len
ovs connection tracking module performs de-fragmentation on incoming
fragmented traffic. Take info account if traffic has been de-fragmented
in execute_check_pkt_len action otherwise we will perform the wrong
nested action considering the original packet size. This issue typically
occurs if ovs-vswitchd adds a rule in the pipeline that requires connection
tracking (e.g. OVN stateful ACLs) before execute_check_pkt_len action.
Moreover take into account GSO fragment size for GSO packet in
execute_check_pkt_len routine
Fixes: 4d5ec89fc8d14 ("net: openvswitch: Add a new action check_pkt_len")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Russell King says:
====================
Two phylink pause fixes
While testing, I discovered two issues with ethtool -A with phylink.
First, if there is a PHY bound to the network device, we hit a
deadlock when phylib tries to notify us of the link changing as a
result of triggering a renegotiation.
Second, when we are manually forcing the pause settings, and there
is no renegotiation triggered, we do not update the MAC via the new
mac_link_up approach.
These two patches solve both problems, and will need to be backported
to v5.7; they do not apply cleanly there due to the introduction of
PCS in the v5.8 merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have been relying on link events and mac_config() when the manual
pause modes are changed. With recent developments, such as moving
the programming of link state to mac_link_up(), this no longer works.
To ensure that we update the MAC, we must generate a link-down followed
by a link-up event; we can do that by setting mac_link_dropped and
triggering a resolve.
Fixes: 91a208f2185a ("net: phylink: propagate resolved link config via mac_link_up()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a phylink's ethtool set_pauseparam support deadlock caused by phylib
interacting with phylink: we must not hold the state lock while calling
phylib functions that may call into phylink_phy_change().
Fixes: f904f15ea9b5 ("net: phylink: allow ethtool -A to change flow control advertisement")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
