summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2007-06-01[SCSI] iscsi class, qla4xxx, iscsi_tcp, ib_iser: export/set initiator nameMike Christie7-4/+27
For iscsi root boot, software iscsi needs to know what the BIOS/OF initiator used for the initiator name so this puts it in sysfs for userspace to be able to pick up. For hw iscsi, it is nice to see what the card is using. This patch adds the new param, and hooks in qla4xxx, iscsi_tcp, and ib_iser. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] libiscsi, iscsi_tcp, ib_iser : add sw iscsi host get/set params helpersMike Christie4-1/+60
iscsid and udev need to key off the hw address being used so add some helpers for iser and iscsi tcp. Also convert them Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] iscsi class: add iscsi host set param eventMike Christie3-1/+37
The iscsi class uses the set_param event to set session and connection params. This patch adds a set_host_param so we can set host level values. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] iscsi_transport, qla4xxx: have class lookup host for driversMike Christie3-17/+21
We are going to be adding more host level sysfs attrs and set_params, so this patch has them take a scsi_host instead of either a scsi_host or host no. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] qla4xxx: export mac as hw addressMike Christie1-4/+35
Export mac as hw address. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] iscsi_transport: export hw addressMike Christie3-3/+45
Add hw address sysfs file. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] iscsi_transport: Check iscsi interface skb allocation return valueMike Christie1-6/+4
Let's not oops when we cannot allocate a skb! Add a check for if alloc_skb fails. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] aacraid: Changeable queue depthSalyzyn, Mark1-0/+38
Inspired by Brian King's patch to the ibmvscsi driver. Adds support for a changeable queue depth to the aacraid driver. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31[SCSI] megaraid: convert to use the data buffer accessorsFUJITA Tomonori1-121/+44
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Sumant Patro <sumant.patro@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31[SCSI] megaraid_sas: convert to use the data buffer accessorsFUJITA Tomonori1-95/+17
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Sumant Patro <sumant.patro@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31[SCSI] megaraid_old: convert to use the data buffer accessorsFUJITA Tomonori1-106/+25
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Sumant Patro <sumant.patro@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31[SCSI] esp: use shost_privChristoph Hellwig4-14/+12
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31[SCSI] introduce shost_priv helperChristoph Hellwig1-0/+4
Currently accessing the scsi host private data is rather messy because it comes as an unsigned long that always needs a cast first. This patch introduces a helper that does the cast called shost_priv. It's similar in spirit to netdev_priv for network drivers. This is the first patch introducing the macro, and the second patch in the series will convert esp and it's subdrivers as an example. Further conversion will wait until the helper is in the tree to make patch juggling easier. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31[SCSI] dpt_i2o: convert to use the data buffer accessorsFUJITA Tomonori1-20/+13
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> ACK. Code inspected. Driver changes NOT unit tested or compile tested. Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31[SCSI] qla2xxx: convert to use the data buffer accessorsFUJITA Tomonori4-181/+107
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31[SCSI] 3w-9xxx: eliminate missed map_single pathFUJITA Tomonori1-7/+1
This removes the remaining unnecessary map_single path Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] Merge up to linux-2.6 headJames Bottomley1042-7328/+45286
Conflicts: drivers/scsi/jazz_esp.c Same changes made by both SCSI and SPARC trees: problem with UTF-8 conversion in the copyright. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] 3w-xxxx: convert to use the data buffer accessorsFUJITA Tomonori1-81/+23
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] 3w-9xxx: convert to use the data buffer accessorsFUJITA Tomonori1-97/+42
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30a bug in ramfs_nommu_resize function, passing old size to vmtruncateBryan Wu1-1/+1
It should be pass "newsize" to vmtruncate function to modify the inode->i_size, while the old size is passed to vmtruncate. This bug was caught by LTP truncate test case on Blackfin platform. After it was fixed, the LTP truncate test case passed. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-30NFS: Fix a refcount leakage in O_DIRECTTrond Myklebust1-3/+9
The current code is leaking a reference to dreq->kref when the calls to nfs_direct_read_schedule() and nfs_direct_write_schedule() return an error. This patch moves the call to kref_put() from nfs_direct_wait() back into nfs_direct_read() and nfs_direct_write() (which are the functions that actually took the reference in the first place) fixing the leak. Thanks to Denis V. Lunev for spotting the bug and proposing the original fix. Acked-by: Denis V. Lunev <dlunev@gmail.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-30fix possible null ptr deref in kallsyms_lookupKyle McMartin1-1/+2
ugh, this function gets called by our unwinder. recursive backtrace for the win... bisection to find this one was "fun." Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-30alpha: support new syscallsRichard Henderson5-52/+147
Some of the new syscalls require supporting TIF_RESTORE_SIGMASK. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-30alpha: cleanup in bitops.hRichard Henderson5-24/+73
Remove 2 functions private to the alpha implemetation, in favor of similar functions in <linux/log2.h>. Provide a more efficient version of the fls64 function for pre-ev67 alphas. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds51-144/+291
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix some section mismatch warnings [ARM] 4417/1: Serial: Fix AMBA drivers locking [ARM] 4394/1: ARMv7: Add the TLB range operations [ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.c [ARM] 4416/1: NWFPE: fix undeclared symbols [ARM] 4415/1: AML5900: fix sparse warnings from map_io [ARM] 4414/1: S3C2443: sparse fix for clock.c [ARM] 4412/1: S3C2412: reset errata fix [ARM] 4411/1: KS8695: Another serial driver fix [ARM] oprofile: avoid lockdep warnings on mpcore oprofile init [ARM] Fix stacktrace FP range checking [ARM] use __used attribute [ARM] enable arbitary speed tty ioctls and split input/output speed [ARM] remove unused header file: arch/arm/mach-s3c2410/bast.h [ARM] 4406/1: Trivial NSLU2 / NAS-100D header & setup code cleanup [ARM] 4405/1: NSLU2, DSM-G600 frequency fixup code [ARM] 4404/1: Trivial IXP42x Kconfig cleanup [ARM] 4403/1: Make the PXA-I2C driver work with lockdep validator [ARM] 4402/1: S3C2443: Add physical address of HSMMC controller [ARM] 4401/1: S3C2443: Add definitions for port GPIOJ
2007-05-30[ARM] Fix some section mismatch warningsRussell King15-17/+16
The following patch fixes these section mismatch warnings: WARNING: arch/arm/mach-at91/built-in.o(.text+0xdf4): Section mismatch: reference to .init.data:dk_nand_partition (between 'nand_partitions' and 'at91_leds_event') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (between 'nand_partitions' and 'ads7843_pendown_state') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xc28): Section mismatch: reference to .init.data:kb9202_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-footbridge/built-in.o(.text+0xaa4): Section mismatch: reference to .init.data:cats_pci (between 'cats_pci_init' and 'ebsa285_leds_event')WARNING: arch/arm/mach-ixp2000/built-in.o(.text+0xb54): Section mismatch: reference to .init.text:ixp2000_init_irq (between 'ixdp2x00_init_irq' and 'ixdp2x00_irq_handler') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x670): Section mismatch: reference to .init.text:ixp23xx_pci_common_init (between 'ixp23xx_pci_slave_init' and 'ixp23xx_pci_scan_bus') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x890): Section mismatch: reference to .init.text:ixp23xx_init_irq (between 'ixdp2351_init_irq' and 'roadrunner_pci_preinit') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x9a8): Section mismatch: reference to .init.text:ixp23xx_pci_preinit (after 'roadrunner_pci_preinit') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x80): Section mismatch: reference to .init.text:imx_set_mmc_info (between '__ksymtab_imx_set_mmc_info' and '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x88): Section mismatch: reference to .init.text:set_imx_fb_info (after '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x1930): Section mismatch: reference to .init.data:neponset_port_fns (between 'neponset_probe' and 'assabet_leds_event') WARNING: drivers/built-in.o(.text+0x3f100): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x3f1c8): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4f988): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4fa50): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30Merge branch 'upstream-linus' of ↵Linus Torvalds10-38/+31
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: ehea: Fixed multi queue RX bug sky2: enable IRQ on duplex renegotiation e1000: restore netif_poll_enable call but make sure IRQs are off defxx: Fix the handling of ioremap() failures sky2: program proper register for fiber PHY sky2: checksum offload plus vlan bug sky2: dont set bogus bit in PHY register [PATCH] hostap: Allocate enough tailroom for TKIP [PATCH] softmac: alloc_ieee80211() NULL check [PATCH] ieee80211: fix incomplete error message [PATCH] prism54: fix monitor mode oops
2007-05-30Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds1-9/+17
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Write at EOF may not update filesize correctly.
2007-05-30ehea: Fixed multi queue RX bugThomas Klein2-2/+2
Must access the respective queue's dummy netdev instead of the port's netdev. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30sky2: enable IRQ on duplex renegotiationStephen Hemminger1-1/+1
Don't want IRQ on FIFO error because there is nothing useful to do with it. But do want IRQ on duplex change. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30e1000: restore netif_poll_enable call but make sure IRQs are offHerbert Xu1-1/+8
This restores the previously removed netif_poll_enable call in e1000_open. It's needed on all but the first call to e1000_open for a NIC as e1000_close always calls netif_poll_disable. netif_poll_enable can only be called safely if no polls have been scheduled. This should be the case as long as we don't enter our IRQ handler. In order to guarantee this we explicitly disable IRQs as early as possible when we're probing the NIC. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Kok, Auke" <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30defxx: Fix the handling of ioremap() failuresMaciej W. Rozycki1-0/+1
If ioremap_nocache() is unfortunate enough to fail, the error code is not set correctly leading to a false success from dfx_register(). This change fixes the problem. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30sky2: program proper register for fiber PHYStephen Hemminger1-1/+1
Driver was reading value from one register, setting bit and then writing the wrong register. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30sky2: checksum offload plus vlan bugStephen Hemminger1-1/+1
Driver was not correctly setting up transmit descriptor when doing VLAN tag insertion with checksum offload. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30sky2: dont set bogus bit in PHY registerStephen Hemminger2-23/+1
This code inherited from the sk98lin driver is incorrect on the Yukon2. The GPHY_CTRL register values are specific to the internal PHY of the chip and the values used were leftovers. Driver was setting bit 13 which is now the INT polarity for the PHY! Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30Merge branch 'upstream-fixes' of ↵Jeff Garzik4-9/+16
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-05-30[SCSI] gdth: Fix obvious typo "spin_lock_irqrestore()"Robert P. J. Day1-1/+1
Fix misspelled "spin_lock_irqrestore" to read "spin_unlock_irqrestore" instead. Presumably, GDTH_RTC doesn't get used a lot. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Acked-by: Achim Leubner <achim_leubner@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] gdth: fix ambiguous gdthtable definitionDavid Rientjes1-1/+1
Labeling a variable as __attribute_used__ is ambiguous: it means __attribute__((unused)) for gcc <3.4 and __attribute__((used)) for gcc >=3.4. There is no such thing as labeling a variable as __attribute__((used)). We assume that we're simply suppressing a warning here if gdthtable[] is declared but unreferenced. Acked-by: Achim Leubner <achim_leubner@adaptec.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] nsp32: convert to use the data buffer accessorsFUJITA Tomonori1-61/+24
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: GOTO Masanori <gotom@sanori.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[ARM] 4417/1: Serial: Fix AMBA drivers lockingThomas Gleixner2-2/+4
The -rt patch triggered a lockdep warning in the amba serial drivers, which never shows up on UP kernels. On SMP systems this would trigger as well. Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. This matches the code in the 8250 serial driver. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] 4394/1: ARMv7: Add the TLB range operationsCatalin Marinas5-2/+107
We are currently using the ARMv6 operations but need to duplicate some of the code because of the introduction of the new CPU barrier instructions in ARMv7. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.cMichael-Luke Jones2-8/+0
This patch removes apparently unnecessary extern declarations in coyote-pci.c and ixdpg425-pci.c within arch/arm/mach-ixp4xx and has been compile-tested without producing warnings or errors. Kernel coding style forbids the use of extern declarations within .c files. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] 4416/1: NWFPE: fix undeclared symbolsBen Dooks1-0/+3
Fix the undeclared symbols sparse is warning about. arch/arm/nwfpe/softfloat.c:1727:7: warning: symbol 'float64_to_uint32' was not declared. Should it be static? arch/arm/nwfpe/softfloat.c:1753:7: warning: symbol 'float64_to_uint32_round_to_zero' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] 4415/1: AML5900: fix sparse warnings from map_ioBen Dooks1-1/+1
The map_io function does not need to be exported from this file, and therefore should be declared static. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] 4414/1: S3C2443: sparse fix for clock.cBen Dooks1-2/+1
Fix sparse warnings in the arch/arm/mach-s3c2443/clock.c, including an bug in initialising the cf clock initialiser where two values are being set for the ctrlbit. arch/arm/mach-s3c2443/clock.c:397:12: warning: symbol 'clk_usb_bus_host' was not declared. Should it be static? arch/arm/mach-s3c2443/clock.c:760:4: error: Initializer entry defined twice arch/arm/mach-s3c2443/clock.c:761:4: also defined here Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] 4412/1: S3C2412: reset errata fixBen Dooks2-0/+45
The S3C2412 has an reset-errata where the clock may cause a glitch switching back to EXTCLK. We force a switch to EXTCLK before writing the reset register to force use of the CLKCON sync logic to properly switch. Fix problem reported by Matthieu Castet. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] 4411/1: KS8695: Another serial driver fixAndrew Victor1-1/+1
Fix a error reported by newer versions of GCC. error: static declaration of 'ks8695_reg' follows non-static declaration Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] oprofile: avoid lockdep warnings on mpcore oprofile initRussell King1-2/+7
Fix lockdep warnings, caused by 'set_affinity' being called without the correct locks taken and local interrupts disabled: ================================= [ INFO: inconsistent lock state ] 2.6.22-rc2 #1 --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. swapper/1 [HC0[0]:SC0[0]:HE1:SE1] takes: (irq_controller_lock){++..}, at: [<c002be50>] gic_set_cpu+0x60/0xa0 {in-hardirq-W} state was registered at: [<c005d9a8>] lock_acquire+0x58/0x6c [<c0233068>] _spin_lock+0x40/0x50 [<c002c020>] gic_mask_irq+0x2c/0x6c [<c0069c64>] handle_level_irq+0x11c/0x14c [<c0020060>] asm_do_IRQ+0x60/0x84 [<c0020d2c>] __irq_svc+0x4c/0xc0 [<c000ed84>] __alloc_bootmem_nopanic+0x74/0x88 [<c000edb0>] __alloc_bootmem+0x18/0x3c [<c000fa00>] alloc_large_system_hash+0x16c/0x200 [<c00108dc>] inode_init_early+0x5c/0xa4 [<c00106dc>] vfs_caches_init_early+0x24/0xa0 [<c0008e54>] start_kernel+0x220/0x2fc [<00008078>] 0x8078 irq event stamp: 88438 hardirqs last enabled at (88438): [<c0020dc0>] preempt_return+0x20/0x2c hardirqs last disabled at (88436): [<c00417bc>] __do_softirq+0xb0/0x138 softirqs last enabled at (88437): [<c0041810>] __do_softirq+0x104/0x138 softirqs last disabled at (88428): [<c0041d9c>] irq_exit+0x68/0x7c other info that might help us debug this: no locks held by swapper/1. stack backtrace: [<c0025ecc>] (dump_stack+0x0/0x14) from [<c005b1e4>] (print_usage_bug+0x138/0x168) [<c005b0ac>] (print_usage_bug+0x0/0x168) from [<c005be80>] (mark_lock+0x484/0x6a0) [<c005b9fc>] (mark_lock+0x0/0x6a0) from [<c005cc48>] (__lock_acquire+0x3c0/0x10c8) [<c005c888>] (__lock_acquire+0x0/0x10c8) from [<c005d9a8>] (lock_acquire+0x58/0x6c) [<c005d950>] (lock_acquire+0x0/0x6c) from [<c0233068>] (_spin_lock+0x40/0x50) [<c0233028>] (_spin_lock+0x0/0x50) from [<c002be50>] (gic_set_cpu+0x60/0xa0) [<c002bdf0>] (gic_set_cpu+0x0/0xa0) from [<c01b04cc>] (em_route_irq+0x38/0x40) [<c01b0494>] (em_route_irq+0x0/0x40) from [<c01b04ec>] (em_setup+0x18/0xa4) [<c01b04d4>] (em_setup+0x0/0xa4) from [<c001570c>] (oprofile_arch_init+0x24/0xe8) [<c00156e8>] (oprofile_arch_init+0x0/0xe8) from [<c0015640>] (oprofile_init+0x1c/0x64) [<c0015624>] (oprofile_init+0x0/0x64) from [<c0008a20>] (kernel_init+0x154/0x368) [<c00088cc>] (kernel_init+0x0/0x368) from [<c003ef34>] (do_exit+0x0/0x904) oprofile: using arm/mpcore Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] Fix stacktrace FP range checkingRussell King1-1/+1
Fix an oops in the stacktrace code, caused by improper range checking. We subtract 12 off 'fp' before testing to see if it's below the low bound. However, if 'fp' were zero before, it becomes a very large positive number, causing this test to succeed where it should fail. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] use __used attributeDavid Rientjes4-5/+5
Use the newly introduced __used attribute in place of the deprecated __attribute_used__. Functionally the same. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 07:20:32 +0000