diff options
Diffstat (limited to 'mm/page-writeback.c')
| -rw-r--r-- | mm/page-writeback.c | 290 |
1 files changed, 186 insertions, 104 deletions
diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 8616ef3025a4..5cdd4f2b0c9d 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -130,6 +130,191 @@ unsigned long global_dirty_limit; static struct prop_descriptor vm_completions; /* + * Work out the current dirty-memory clamping and background writeout + * thresholds. + * + * The main aim here is to lower them aggressively if there is a lot of mapped + * memory around. To avoid stressing page reclaim with lots of unreclaimable + * pages. It is better to clamp down on writers than to start swapping, and + * performing lots of scanning. + * + * We only allow 1/2 of the currently-unmapped memory to be dirtied. + * + * We don't permit the clamping level to fall below 5% - that is getting rather + * excessive. + * + * We make sure that the background writeout level is below the adjusted + * clamping level. + */ + +/* + * In a memory zone, there is a certain amount of pages we consider + * available for the page cache, which is essentially the number of + * free and reclaimable pages, minus some zone reserves to protect + * lowmem and the ability to uphold the zone's watermarks without + * requiring writeback. + * + * This number of dirtyable pages is the base value of which the + * user-configurable dirty ratio is the effictive number of pages that + * are allowed to be actually dirtied. Per individual zone, or + * globally by using the sum of dirtyable pages over all zones. + * + * Because the user is allowed to specify the dirty limit globally as + * absolute number of bytes, calculating the per-zone dirty limit can + * require translating the configured limit into a percentage of + * global dirtyable memory first. + */ + +static unsigned long highmem_dirtyable_memory(unsigned long total) +{ +#ifdef CONFIG_HIGHMEM + int node; + unsigned long x = 0; + + for_each_node_state(node, N_HIGH_MEMORY) { + struct zone *z = + &NODE_DATA(node)->node_zones[ZONE_HIGHMEM]; + + x += zone_page_state(z, NR_FREE_PAGES) + + zone_reclaimable_pages(z) - z->dirty_balance_reserve; + } + /* + * Make sure that the number of highmem pages is never larger + * than the number of the total dirtyable memory. This can only + * occur in very strange VM situations but we want to make sure + * that this does not occur. + */ + return min(x, total); +#else + return 0; +#endif +} + +/** + * global_dirtyable_memory - number of globally dirtyable pages + * + * Returns the global number of pages potentially available for dirty + * page cache. This is the base value for the global dirty limits. + */ +unsigned long global_dirtyable_memory(void) +{ + unsigned long x; + + x = global_page_state(NR_FREE_PAGES) + global_reclaimable_pages() - + dirty_balance_reserve; + + if (!vm_highmem_is_dirtyable) + x -= highmem_dirtyable_memory(x); + + return x + 1; /* Ensure that we never return 0 */ +} + +/* + * global_dirty_limits - background-writeback and dirty-throttling thresholds + * + * Calculate the dirty thresholds based on sysctl parameters + * - vm.dirty_background_ratio or vm.dirty_background_bytes + * - vm.dirty_ratio or vm.dirty_bytes + * The dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and + * real-time tasks. + */ +void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty) +{ + unsigned long background; + unsigned long dirty; + unsigned long uninitialized_var(available_memory); + struct task_struct *tsk; + + if (!vm_dirty_bytes || !dirty_background_bytes) + available_memory = global_dirtyable_memory(); + + if (vm_dirty_bytes) + dirty = DIV_ROUND_UP(vm_dirty_bytes, PAGE_SIZE); + else + dirty = (vm_dirty_ratio * available_memory) / 100; + + if (dirty_background_bytes) + background = DIV_ROUND_UP(dirty_background_bytes, PAGE_SIZE); + else + background = (dirty_background_ratio * available_memory) / 100; + + if (background >= dirty) + background = dirty / 2; + tsk = current; + if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk)) { + background += background / 4; + dirty += dirty / 4; + } + *pbackground = background; + *pdirty = dirty; + trace_global_dirty_state(background, dirty); +} + +/** + * zone_dirtyable_memory - number of dirtyable pages in a zone + * @zone: the zone + * + * Returns the zone's number of pages potentially available for dirty + * page cache. This is the base value for the per-zone dirty limits. + */ +static unsigned long zone_dirtyable_memory(struct zone *zone) +{ + /* + * The effective global number of dirtyable pages may exclude + * highmem as a big-picture measure to keep the ratio between + * dirty memory and lowmem reasonable. + * + * But this function is purely about the individual zone and a + * highmem zone can hold its share of dirty pages, so we don't + * care about vm_highmem_is_dirtyable here. + */ + return zone_page_state(zone, NR_FREE_PAGES) + + zone_reclaimable_pages(zone) - + zone->dirty_balance_reserve; +} + +/** + * zone_dirty_limit - maximum number of dirty pages allowed in a zone + * @zone: the zone + * + * Returns the maximum number of dirty pages allowed in a zone, based + * on the zone's dirtyable memory. + */ +static unsigned long zone_dirty_limit(struct zone *zone) +{ + unsigned long zone_memory = zone_dirtyable_memory(zone); + struct task_struct *tsk = current; + unsigned long dirty; + + if (vm_dirty_bytes) + dirty = DIV_ROUND_UP(vm_dirty_bytes, PAGE_SIZE) * + zone_memory / global_dirtyable_memory(); + else + dirty = vm_dirty_ratio * zone_memory / 100; + + if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk)) + dirty += dirty / 4; + + return dirty; +} + +/** + * zone_dirty_ok - tells whether a zone is within its dirty limits + * @zone: the zone to check + * + * Returns %true when the dirty pages in @zone are within the zone's + * dirty limit, %false if the limit is exceeded. + */ +bool zone_dirty_ok(struct zone *zone) +{ + unsigned long limit = zone_dirty_limit(zone); + + return zone_page_state(zone, NR_FILE_DIRTY) + + zone_page_state(zone, NR_UNSTABLE_NFS) + + zone_page_state(zone, NR_WRITEBACK) <= limit; +} + +/* * couple the period to the dirty_ratio: * * period/2 ~ roundup_pow_of_two(dirty limit) @@ -141,7 +326,7 @@ static int calc_period_shift(void) if (vm_dirty_bytes) dirty_total = vm_dirty_bytes / PAGE_SIZE; else - dirty_total = (vm_dirty_ratio * determine_dirtyable_memory()) / + dirty_total = (vm_dirty_ratio * global_dirtyable_memory()) / 100; return 2 + ilog2(dirty_total - 1); } @@ -196,7 +381,6 @@ int dirty_ratio_handler(struct ctl_table *table, int write, return ret; } - int dirty_bytes_handler(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos) @@ -291,67 +475,6 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned max_ratio) } EXPORT_SYMBOL(bdi_set_max_ratio); -/* - * Work out the current dirty-memory clamping and background writeout - * thresholds. - * - * The main aim here is to lower them aggressively if there is a lot of mapped - * memory around. To avoid stressing page reclaim with lots of unreclaimable - * pages. It is better to clamp down on writers than to start swapping, and - * performing lots of scanning. - * - * We only allow 1/2 of the currently-unmapped memory to be dirtied. - * - * We don't permit the clamping level to fall below 5% - that is getting rather - * excessive. - * - * We make sure that the background writeout level is below the adjusted - * clamping level. - */ - -static unsigned long highmem_dirtyable_memory(unsigned long total) -{ -#ifdef CONFIG_HIGHMEM - int node; - unsigned long x = 0; - - for_each_node_state(node, N_HIGH_MEMORY) { - struct zone *z = - &NODE_DATA(node)->node_zones[ZONE_HIGHMEM]; - - x += zone_page_state(z, NR_FREE_PAGES) + - zone_reclaimable_pages(z); - } - /* - * Make sure that the number of highmem pages is never larger - * than the number of the total dirtyable memory. This can only - * occur in very strange VM situations but we want to make sure - * that this does not occur. - */ - return min(x, total); -#else - return 0; -#endif -} - -/** - * determine_dirtyable_memory - amount of memory that may be used - * - * Returns the numebr of pages that can currently be freed and used - * by the kernel for direct mappings. - */ -unsigned long determine_dirtyable_memory(void) -{ - unsigned long x; - - x = global_page_state(NR_FREE_PAGES) + global_reclaimable_pages(); - - if (!vm_highmem_is_dirtyable) - x -= highmem_dirtyable_memory(x); - - return x + 1; /* Ensure that we never return 0 */ -} - static unsigned long dirty_freerun_ceiling(unsigned long thresh, unsigned long bg_thresh) { @@ -363,47 +486,6 @@ static unsigned long hard_dirty_limit(unsigned long thresh) return max(thresh, global_dirty_limit); } -/* - * global_dirty_limits - background-writeback and dirty-throttling thresholds - * - * Calculate the dirty thresholds based on sysctl parameters - * - vm.dirty_background_ratio or vm.dirty_background_bytes - * - vm.dirty_ratio or vm.dirty_bytes - * The dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and - * real-time tasks. - */ -void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty) -{ - unsigned long background; - unsigned long dirty; - unsigned long uninitialized_var(available_memory); - struct task_struct *tsk; - - if (!vm_dirty_bytes || !dirty_background_bytes) - available_memory = determine_dirtyable_memory(); - - if (vm_dirty_bytes) - dirty = DIV_ROUND_UP(vm_dirty_bytes, PAGE_SIZE); - else - dirty = (vm_dirty_ratio * available_memory) / 100; - - if (dirty_background_bytes) - background = DIV_ROUND_UP(dirty_background_bytes, PAGE_SIZE); - else - background = (dirty_background_ratio * available_memory) / 100; - - if (background >= dirty) - background = dirty / 2; - tsk = current; - if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk)) { - background += background / 4; - dirty += dirty / 4; - } - *pbackground = background; - *pdirty = dirty; - trace_global_dirty_state(background, dirty); -} - /** * bdi_dirty_limit - @bdi's share of dirty throttling threshold * @bdi: the backing_dev_info to query |