diff options
Diffstat (limited to 'include/uapi')
67 files changed, 2161 insertions, 346 deletions
diff --git a/include/uapi/asm-generic/hugetlb_encode.h b/include/uapi/asm-generic/hugetlb_encode.h new file mode 100644 index 000000000000..e4732d3c2998 --- /dev/null +++ b/include/uapi/asm-generic/hugetlb_encode.h @@ -0,0 +1,34 @@ +#ifndef _ASM_GENERIC_HUGETLB_ENCODE_H_ +#define _ASM_GENERIC_HUGETLB_ENCODE_H_ + +/* + * Several system calls take a flag to request "hugetlb" huge pages. + * Without further specification, these system calls will use the + * system's default huge page size. If a system supports multiple + * huge page sizes, the desired huge page size can be specified in + * bits [26:31] of the flag arguments. The value in these 6 bits + * will encode the log2 of the huge page size. + * + * The following definitions are associated with this huge page size + * encoding in flag arguments. System call specific header files + * that use this encoding should include this file. They can then + * provide definitions based on these with their own specific prefix. + * for example: + * #define MAP_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT + */ + +#define HUGETLB_FLAG_ENCODE_SHIFT 26 +#define HUGETLB_FLAG_ENCODE_MASK 0x3f + +#define HUGETLB_FLAG_ENCODE_64KB (16 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_512KB (19 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_1MB (20 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_2MB (21 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_8MB (23 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_16MB (24 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_256MB (28 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_1GB (30 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_2GB (31 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_16GB (34 << HUGETLB_FLAG_ENCODE_SHIFT) + +#endif /* _ASM_GENERIC_HUGETLB_ENCODE_H_ */ diff --git a/include/uapi/asm-generic/mman-common.h b/include/uapi/asm-generic/mman-common.h index 8c27db0c5c08..203268f9231e 100644 --- a/include/uapi/asm-generic/mman-common.h +++ b/include/uapi/asm-generic/mman-common.h @@ -58,20 +58,12 @@ overrides the coredump filter bits */ #define MADV_DODUMP 17 /* Clear the MADV_DONTDUMP flag */ +#define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */ +#define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */ + /* compatibility flags */ #define MAP_FILE 0 -/* - * When MAP_HUGETLB is set bits [26:31] encode the log2 of the huge page size. - * This gives us 6 bits, which is enough until someone invents 128 bit address - * spaces. - * - * Assume these are all power of twos. - * When 0 use the default page size. - */ -#define MAP_HUGE_SHIFT 26 -#define MAP_HUGE_MASK 0x3f - #define PKEY_DISABLE_ACCESS 0x1 #define PKEY_DISABLE_WRITE 0x2 #define PKEY_ACCESS_MASK (PKEY_DISABLE_ACCESS |\ diff --git a/include/uapi/asm-generic/socket.h b/include/uapi/asm-generic/socket.h index 9861be8da65e..e47c9e436221 100644 --- a/include/uapi/asm-generic/socket.h +++ b/include/uapi/asm-generic/socket.h @@ -104,4 +104,6 @@ #define SO_PEERGROUPS 59 +#define SO_ZEROCOPY 60 + #endif /* __ASM_GENERIC_SOCKET_H */ diff --git a/include/uapi/drm/armada_drm.h b/include/uapi/drm/armada_drm.h index 72e326f9c7de..0cb932416cfe 100644 --- a/include/uapi/drm/armada_drm.h +++ b/include/uapi/drm/armada_drm.h @@ -23,27 +23,27 @@ extern "C" { DRM_##dir(DRM_COMMAND_BASE + DRM_ARMADA_##name, struct drm_armada_##str) struct drm_armada_gem_create { - uint32_t handle; - uint32_t size; + __u32 handle; + __u32 size; }; #define DRM_IOCTL_ARMADA_GEM_CREATE \ ARMADA_IOCTL(IOWR, GEM_CREATE, gem_create) struct drm_armada_gem_mmap { - uint32_t handle; - uint32_t pad; - uint64_t offset; - uint64_t size; - uint64_t addr; + __u32 handle; + __u32 pad; + __u64 offset; + __u64 size; + __u64 addr; }; #define DRM_IOCTL_ARMADA_GEM_MMAP \ ARMADA_IOCTL(IOWR, GEM_MMAP, gem_mmap) struct drm_armada_gem_pwrite { - uint64_t ptr; - uint32_t handle; - uint32_t offset; - uint32_t size; + __u64 ptr; + __u32 handle; + __u32 offset; + __u32 size; }; #define DRM_IOCTL_ARMADA_GEM_PWRITE \ ARMADA_IOCTL(IOW, GEM_PWRITE, gem_pwrite) diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h index 101593ab10ac..97677cd6964d 100644 --- a/include/uapi/drm/drm.h +++ b/include/uapi/drm/drm.h @@ -700,6 +700,7 @@ struct drm_prime_handle { struct drm_syncobj_create { __u32 handle; +#define DRM_SYNCOBJ_CREATE_SIGNALED (1 << 0) __u32 flags; }; @@ -718,6 +719,24 @@ struct drm_syncobj_handle { __u32 pad; }; +#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_ALL (1 << 0) +#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT (1 << 1) +struct drm_syncobj_wait { + __u64 handles; + /* absolute timeout */ + __s64 timeout_nsec; + __u32 count_handles; + __u32 flags; + __u32 first_signaled; /* only valid when not waiting all */ + __u32 pad; +}; + +struct drm_syncobj_array { + __u64 handles; + __u32 count_handles; + __u32 pad; +}; + #if defined(__cplusplus) } #endif @@ -840,6 +859,9 @@ extern "C" { #define DRM_IOCTL_SYNCOBJ_DESTROY DRM_IOWR(0xC0, struct drm_syncobj_destroy) #define DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD DRM_IOWR(0xC1, struct drm_syncobj_handle) #define DRM_IOCTL_SYNCOBJ_FD_TO_HANDLE DRM_IOWR(0xC2, struct drm_syncobj_handle) +#define DRM_IOCTL_SYNCOBJ_WAIT DRM_IOWR(0xC3, struct drm_syncobj_wait) +#define DRM_IOCTL_SYNCOBJ_RESET DRM_IOWR(0xC4, struct drm_syncobj_array) +#define DRM_IOCTL_SYNCOBJ_SIGNAL DRM_IOWR(0xC5, struct drm_syncobj_array) /** * Device specific ioctls should only be in their respective headers diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h index 7586c46f68bf..3ad838d3f93f 100644 --- a/include/uapi/drm/drm_fourcc.h +++ b/include/uapi/drm/drm_fourcc.h @@ -185,6 +185,8 @@ extern "C" { #define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07 /* add more to the end as needed */ +#define DRM_FORMAT_RESERVED ((1ULL << 56) - 1) + #define fourcc_mod_code(vendor, val) \ ((((__u64)DRM_FORMAT_MOD_VENDOR_## vendor) << 56) | (val & 0x00ffffffffffffffULL)) @@ -197,6 +199,15 @@ extern "C" { */ /* + * Invalid Modifier + * + * This modifier can be used as a sentinel to terminate the format modifiers + * list, or to initialize a variable with an invalid modifier. It might also be + * used to report an error back to userspace for certain APIs. + */ +#define DRM_FORMAT_MOD_INVALID fourcc_mod_code(NONE, DRM_FORMAT_RESERVED) + +/* * Linear Layout * * Just plain linear layout. Note that this is different from no specifying any @@ -253,6 +264,26 @@ extern "C" { #define I915_FORMAT_MOD_Yf_TILED fourcc_mod_code(INTEL, 3) /* + * Intel color control surface (CCS) for render compression + * + * The framebuffer format must be one of the 8:8:8:8 RGB formats. + * The main surface will be plane index 0 and must be Y/Yf-tiled, + * the CCS will be plane index 1. + * + * Each CCS tile matches a 1024x512 pixel area of the main surface. + * To match certain aspects of the 3D hardware the CCS is + * considered to be made up of normal 128Bx32 Y tiles, Thus + * the CCS pitch must be specified in multiples of 128 bytes. + * + * In reality the CCS tile appears to be a 64Bx64 Y tile, composed + * of QWORD (8 bytes) chunks instead of OWORD (16 bytes) chunks. + * But that fact is not relevant unless the memory is accessed + * directly. + */ +#define I915_FORMAT_MOD_Y_TILED_CCS fourcc_mod_code(INTEL, 4) +#define I915_FORMAT_MOD_Yf_TILED_CCS fourcc_mod_code(INTEL, 5) + +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks * * Macroblocks are laid in a Z-shape, and each pixel data is following the diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index 403339f98a92..54fc38c3c3f1 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -712,6 +712,56 @@ struct drm_mode_atomic { __u64 user_data; }; +struct drm_format_modifier_blob { +#define FORMAT_BLOB_CURRENT 1 + /* Version of this blob format */ + __u32 version; + + /* Flags */ + __u32 flags; + + /* Number of fourcc formats supported */ + __u32 count_formats; + + /* Where in this blob the formats exist (in bytes) */ + __u32 formats_offset; + + /* Number of drm_format_modifiers */ + __u32 count_modifiers; + + /* Where in this blob the modifiers exist (in bytes) */ + __u32 modifiers_offset; + + /* __u32 formats[] */ + /* struct drm_format_modifier modifiers[] */ +}; + +struct drm_format_modifier { + /* Bitmask of formats in get_plane format list this info applies to. The + * offset allows a sliding window of which 64 formats (bits). + * + * Some examples: + * In today's world with < 65 formats, and formats 0, and 2 are + * supported + * 0x0000000000000005 + * ^-offset = 0, formats = 5 + * + * If the number formats grew to 128, and formats 98-102 are + * supported with the modifier: + * + * 0x0000003c00000000 0000000000000000 + * ^ + * |__offset = 64, formats = 0x3c00000000 + * + */ + __u64 formats; + __u32 offset; + __u32 pad; + + /* The modifier that applies to the >get_plane format list bitmask. */ + __u64 modifier; +}; + /** * Create a new 'blob' data property, copying length bytes from data pointer, * and returning new blob ID. diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index 7ccbd6a2bbe0..6598fb76d2c2 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -260,6 +260,8 @@ typedef struct _drm_i915_sarea { #define DRM_I915_GEM_CONTEXT_GETPARAM 0x34 #define DRM_I915_GEM_CONTEXT_SETPARAM 0x35 #define DRM_I915_PERF_OPEN 0x36 +#define DRM_I915_PERF_ADD_CONFIG 0x37 +#define DRM_I915_PERF_REMOVE_CONFIG 0x38 #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) @@ -315,6 +317,8 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_GEM_CONTEXT_GETPARAM DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_GETPARAM, struct drm_i915_gem_context_param) #define DRM_IOCTL_I915_GEM_CONTEXT_SETPARAM DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_SETPARAM, struct drm_i915_gem_context_param) #define DRM_IOCTL_I915_PERF_OPEN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_OPEN, struct drm_i915_perf_open_param) +#define DRM_IOCTL_I915_PERF_ADD_CONFIG DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_ADD_CONFIG, struct drm_i915_perf_oa_config) +#define DRM_IOCTL_I915_PERF_REMOVE_CONFIG DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_REMOVE_CONFIG, __u64) /* Allow drivers to submit batchbuffers directly to hardware, relying * on the security mechanisms provided by hardware. @@ -431,6 +435,11 @@ typedef struct drm_i915_irq_wait { */ #define I915_PARAM_HAS_EXEC_BATCH_FIRST 48 +/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of + * drm_i915_gem_exec_fence structures. See I915_EXEC_FENCE_ARRAY. + */ +#define I915_PARAM_HAS_EXEC_FENCE_ARRAY 49 + typedef struct drm_i915_getparam { __s32 param; /* @@ -812,6 +821,17 @@ struct drm_i915_gem_exec_object2 { __u64 rsvd2; }; +struct drm_i915_gem_exec_fence { + /** + * User's handle for a drm_syncobj to wait on or signal. + */ + __u32 handle; + +#define I915_EXEC_FENCE_WAIT (1<<0) +#define I915_EXEC_FENCE_SIGNAL (1<<1) + __u32 flags; +}; + struct drm_i915_gem_execbuffer2 { /** * List of gem_exec_object2 structs @@ -826,7 +846,11 @@ struct drm_i915_gem_execbuffer2 { __u32 DR1; __u32 DR4; __u32 num_cliprects; - /** This is a struct drm_clip_rect *cliprects */ + /** + * This is a struct drm_clip_rect *cliprects if I915_EXEC_FENCE_ARRAY + * is not set. If I915_EXEC_FENCE_ARRAY is set, then this is a + * struct drm_i915_gem_exec_fence *fences. + */ __u64 cliprects_ptr; #define I915_EXEC_RING_MASK (7<<0) #define I915_EXEC_DEFAULT (0<<0) @@ -927,7 +951,14 @@ struct drm_i915_gem_execbuffer2 { * element). */ #define I915_EXEC_BATCH_FIRST (1<<18) -#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_BATCH_FIRST<<1)) + +/* Setting I915_FENCE_ARRAY implies that num_cliprects and cliprects_ptr + * define an array of i915_gem_exec_fence structures which specify a set of + * dma fences to wait upon or signal. + */ +#define I915_EXEC_FENCE_ARRAY (1<<19) + +#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_ARRAY<<1)) #define I915_EXEC_CONTEXT_ID_MASK (0xffffffff) #define i915_execbuffer2_set_context_id(eb2, context) \ @@ -1467,6 +1498,22 @@ enum drm_i915_perf_record_type { DRM_I915_PERF_RECORD_MAX /* non-ABI */ }; +/** + * Structure to upload perf dynamic configuration into the kernel. + */ +struct drm_i915_perf_oa_config { + /** String formatted like "%08x-%04x-%04x-%04x-%012x" */ + char uuid[36]; + + __u32 n_mux_regs; + __u32 n_boolean_regs; + __u32 n_flex_regs; + + __u64 __user mux_regs_ptr; + __u64 __user boolean_regs_ptr; + __u64 __user flex_regs_ptr; +}; + #if defined(__cplusplus) } #endif diff --git a/include/uapi/drm/msm_drm.h b/include/uapi/drm/msm_drm.h index 26c54f6d595d..ad4eb2863e70 100644 --- a/include/uapi/drm/msm_drm.h +++ b/include/uapi/drm/msm_drm.h @@ -171,7 +171,7 @@ struct drm_msm_gem_submit_cmd { __u32 size; /* in, cmdstream size */ __u32 pad; __u32 nr_relocs; /* in, number of submit_reloc's */ - __u64 __user relocs; /* in, ptr to array of submit_reloc's */ + __u64 relocs; /* in, ptr to array of submit_reloc's */ }; /* Each buffer referenced elsewhere in the cmdstream submit (ie. the @@ -215,8 +215,8 @@ struct drm_msm_gem_submit { __u32 fence; /* out */ __u32 nr_bos; /* in, number of submit_bo's */ __u32 nr_cmds; /* in, number of submit_cmd's */ - __u64 __user bos; /* in, ptr to array of submit_bo's */ - __u64 __user cmds; /* in, ptr to array of submit_cmd's */ + __u64 bos; /* in, ptr to array of submit_bo's */ + __u64 cmds; /* in, ptr to array of submit_cmd's */ __s32 fence_fd; /* in/out fence fd (see MSM_SUBMIT_FENCE_FD_IN/OUT) */ }; diff --git a/include/uapi/drm/qxl_drm.h b/include/uapi/drm/qxl_drm.h index 7eef42213051..880999d2d863 100644 --- a/include/uapi/drm/qxl_drm.h +++ b/include/uapi/drm/qxl_drm.h @@ -80,8 +80,8 @@ struct drm_qxl_reloc { }; struct drm_qxl_command { - __u64 __user command; /* void* */ - __u64 __user relocs; /* struct drm_qxl_reloc* */ + __u64 command; /* void* */ + __u64 relocs; /* struct drm_qxl_reloc* */ __u32 type; __u32 command_size; __u32 relocs_num; @@ -91,7 +91,7 @@ struct drm_qxl_command { struct drm_qxl_execbuffer { __u32 flags; /* for future use */ __u32 commands_num; - __u64 __user commands; /* struct drm_qxl_command* */ + __u64 commands; /* struct drm_qxl_command* */ }; struct drm_qxl_update_area { diff --git a/include/uapi/drm/vc4_drm.h b/include/uapi/drm/vc4_drm.h index 6ac4c5c014cb..afae87004963 100644 --- a/include/uapi/drm/vc4_drm.h +++ b/include/uapi/drm/vc4_drm.h @@ -40,6 +40,7 @@ extern "C" { #define DRM_VC4_GET_PARAM 0x07 #define DRM_VC4_SET_TILING 0x08 #define DRM_VC4_GET_TILING 0x09 +#define DRM_VC4_LABEL_BO 0x0a #define DRM_IOCTL_VC4_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_SUBMIT_CL, struct drm_vc4_submit_cl) #define DRM_IOCTL_VC4_WAIT_SEQNO DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_WAIT_SEQNO, struct drm_vc4_wait_seqno) @@ -51,6 +52,7 @@ extern "C" { #define DRM_IOCTL_VC4_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_GET_PARAM, struct drm_vc4_get_param) #define DRM_IOCTL_VC4_SET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_SET_TILING, struct drm_vc4_set_tiling) #define DRM_IOCTL_VC4_GET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_GET_TILING, struct drm_vc4_get_tiling) +#define DRM_IOCTL_VC4_LABEL_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_LABEL_BO, struct drm_vc4_label_bo) struct drm_vc4_submit_rcl_surface { __u32 hindex; /* Handle index, or ~0 if not present. */ @@ -153,6 +155,16 @@ struct drm_vc4_submit_cl { __u32 pad:24; #define VC4_SUBMIT_CL_USE_CLEAR_COLOR (1 << 0) +/* By default, the kernel gets to choose the order that the tiles are + * rendered in. If this is set, then the tiles will be rendered in a + * raster order, with the right-to-left vs left-to-right and + * top-to-bottom vs bottom-to-top dictated by + * VC4_SUBMIT_CL_RCL_ORDER_INCREASING_*. This allows overlapping + * blits to be implemented using the 3D engine. + */ +#define VC4_SUBMIT_CL_FIXED_RCL_ORDER (1 << 1) +#define VC4_SUBMIT_CL_RCL_ORDER_INCREASING_X (1 << 2) +#define VC4_SUBMIT_CL_RCL_ORDER_INCREASING_Y (1 << 3) __u32 flags; /* Returned value of the seqno of this render job (for the @@ -292,6 +304,7 @@ struct drm_vc4_get_hang_state { #define DRM_VC4_PARAM_SUPPORTS_BRANCHES 3 #define DRM_VC4_PARAM_SUPPORTS_ETC1 4 #define DRM_VC4_PARAM_SUPPORTS_THREADED_FS 5 +#define DRM_VC4_PARAM_SUPPORTS_FIXED_RCL_ORDER 6 struct drm_vc4_get_param { __u32 param; @@ -311,6 +324,15 @@ struct drm_vc4_set_tiling { __u64 modifier; }; +/** + * struct drm_vc4_label_bo - Attach a name to a BO for debug purposes. + */ +struct drm_vc4_label_bo { + __u32 handle; + __u32 len; + __u64 name; +}; + #if defined(__cplusplus) } #endif diff --git a/include/uapi/drm/vmwgfx_drm.h b/include/uapi/drm/vmwgfx_drm.h index d9dfde9aa757..0bc784f5e0db 100644 --- a/include/uapi/drm/vmwgfx_drm.h +++ b/include/uapi/drm/vmwgfx_drm.h @@ -297,13 +297,17 @@ union drm_vmw_surface_reference_arg { * @version: Allows expanding the execbuf ioctl parameters without breaking * backwards compatibility, since user-space will always tell the kernel * which version it uses. - * @flags: Execbuf flags. None currently. + * @flags: Execbuf flags. + * @imported_fence_fd: FD for a fence imported from another device * * Argument to the DRM_VMW_EXECBUF Ioctl. */ #define DRM_VMW_EXECBUF_VERSION 2 +#define DRM_VMW_EXECBUF_FLAG_IMPORT_FENCE_FD (1 << 0) +#define DRM_VMW_EXECBUF_FLAG_EXPORT_FENCE_FD (1 << 1) + struct drm_vmw_execbuf_arg { __u64 commands; __u32 command_size; @@ -312,7 +316,7 @@ struct drm_vmw_execbuf_arg { __u32 version; __u32 flags; __u32 context_handle; - __u32 pad64; + __s32 imported_fence_fd; }; /** @@ -328,6 +332,7 @@ struct drm_vmw_execbuf_arg { * @passed_seqno: The highest seqno number processed by the hardware * so far. This can be used to mark user-space fence objects as signaled, and * to determine whether a fence seqno might be stale. + * @fd: FD associated with the fence, -1 if not exported * @error: This member should've been set to -EFAULT on submission. * The following actions should be take on completion: * error == -EFAULT: Fence communication failed. The host is synchronized. @@ -345,7 +350,7 @@ struct drm_vmw_fence_rep { __u32 mask; __u32 seqno; __u32 passed_seqno; - __u32 pad64; + __s32 fd; __s32 error; }; diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index a2d4a8ac94ca..a04adbc70ddf 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -28,6 +28,7 @@ #define __LINUX__AIO_ABI_H #include <linux/types.h> +#include <linux/fs.h> #include <asm/byteorder.h> typedef __kernel_ulong_t aio_context_t; @@ -62,14 +63,6 @@ struct io_event { __s64 res2; /* secondary result */ }; -#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) -#define PADDED(x,y) x, y -#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) -#define PADDED(x,y) y, x -#else -#error edit for your odd byteorder. -#endif - /* * we always use a 64bit off_t when communicating * with userland. its up to libraries to do the @@ -79,8 +72,16 @@ struct io_event { struct iocb { /* these are internal to the kernel/libc. */ __u64 aio_data; /* data to be returned in event's data */ - __u32 PADDED(aio_key, aio_rw_flags); - /* the kernel sets aio_key to the req # */ + +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) + __u32 aio_key; /* the kernel sets aio_key to the req # */ + __kernel_rwf_t aio_rw_flags; /* RWF_* flags */ +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) + __kernel_rwf_t aio_rw_flags; /* RWF_* flags */ + __u32 aio_key; /* the kernel sets aio_key to the req # */ +#else +#error edit for your odd byteorder. +#endif /* common fields */ __u16 aio_lio_opcode; /* see IOCB_CMD_ above */ diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h index 51f891fb1b18..84a9a0944e13 100644 --- a/include/uapi/linux/android/binder.h +++ b/include/uapi/linux/android/binder.h @@ -132,6 +132,7 @@ enum { /* struct binder_fd_array_object - object describing an array of fds in a buffer * @hdr: common header structure + * @pad: padding to ensure correct alignment * @num_fds: number of file descriptors in the buffer * @parent: index in offset array to buffer holding the fd array * @parent_offset: start offset of fd array in the buffer @@ -152,6 +153,7 @@ enum { */ struct binder_fd_array_object { struct binder_object_header hdr; + __u32 pad; binder_size_t num_fds; binder_size_t parent; binder_size_t parent_offset; @@ -184,6 +186,19 @@ struct binder_version { #define BINDER_CURRENT_PROTOCOL_VERSION 8 #endif +/* + * Use with BINDER_GET_NODE_DEBUG_INFO, driver reads ptr, writes to all fields. + * Set ptr to NULL for the first call to get the info for the first node, and + * then repeat the call passing the previously returned value to get the next + * nodes. ptr will be 0 when there are no more nodes. + */ +struct binder_node_debug_info { + binder_uintptr_t ptr; + binder_uintptr_t cookie; + __u32 has_strong_ref; + __u32 has_weak_ref; +}; + #define BINDER_WRITE_READ _IOWR('b', 1, struct binder_write_read) #define BINDER_SET_IDLE_TIMEOUT _IOW('b', 3, __s64) #define BINDER_SET_MAX_THREADS _IOW('b', 5, __u32) @@ -191,6 +206,7 @@ struct binder_version { #define BINDER_SET_CONTEXT_MGR _IOW('b', 7, __s32) #define BINDER_THREAD_EXIT _IOW('b', 8, __s32) #define BINDER_VERSION _IOWR('b', 9, struct binder_version) +#define BINDER_GET_NODE_DEBUG_INFO _IOWR('b', 11, struct binder_node_debug_info) /* * NOTE: Two special error codes you should check for when calling diff --git a/include/uapi/linux/blktrace_api.h b/include/uapi/linux/blktrace_api.h index c590ca6bfbd9..9cdaedeadb84 100644 --- a/include/uapi/linux/blktrace_api.h +++ b/include/uapi/linux/blktrace_api.h @@ -52,6 +52,7 @@ enum blktrace_act { __BLK_TA_REMAP, /* bio was remapped */ __BLK_TA_ABORT, /* request aborted */ __BLK_TA_DRV_DATA, /* driver-specific binary data */ + __BLK_TA_CGROUP = 1 << 8, /* from a cgroup*/ }; /* @@ -61,6 +62,7 @@ enum blktrace_notify { __BLK_TN_PROCESS = 0, /* establish pid/name mapping */ __BLK_TN_TIMESTAMP, /* include system clock */ __BLK_TN_MESSAGE, /* Character string message */ + __BLK_TN_CGROUP = __BLK_TA_CGROUP, /* from a cgroup */ }; @@ -107,6 +109,7 @@ struct blk_io_trace { __u32 cpu; /* on what cpu did it happen */ __u16 error; /* completion error */ __u16 pdu_len; /* length of data after this trace */ + /* cgroup id will be stored here if exists */ }; /* diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index e99e3e6f8b37..ba848b761cfb 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -30,9 +30,14 @@ #define BPF_FROM_LE BPF_TO_LE #define BPF_FROM_BE BPF_TO_BE +/* jmp encodings */ #define BPF_JNE 0x50 /* jump != */ +#define BPF_JLT 0xa0 /* LT is unsigned, '<' */ +#define BPF_JLE 0xb0 /* LE is unsigned, '<=' */ #define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */ #define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ +#define BPF_JSLT 0xc0 /* SLT is signed, '<' */ +#define BPF_JSLE 0xd0 /* SLE is signed, '<=' */ #define BPF_CALL 0x80 /* function call */ #define BPF_EXIT 0x90 /* function return */ @@ -104,6 +109,8 @@ enum bpf_map_type { BPF_MAP_TYPE_LPM_TRIE, BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_HASH_OF_MAPS, + BPF_MAP_TYPE_DEVMAP, + BPF_MAP_TYPE_SOCKMAP, }; enum bpf_prog_type { @@ -121,6 +128,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_LWT_OUT, BPF_PROG_TYPE_LWT_XMIT, BPF_PROG_TYPE_SOCK_OPS, + BPF_PROG_TYPE_SK_SKB, }; enum bpf_attach_type { @@ -128,6 +136,8 @@ enum bpf_attach_type { BPF_CGROUP_INET_EGRESS, BPF_CGROUP_INET_SOCK_CREATE, BPF_CGROUP_SOCK_OPS, + BPF_SK_SKB_STREAM_PARSER, + BPF_SK_SKB_STREAM_VERDICT, __MAX_BPF_ATTACH_TYPE }; @@ -153,6 +163,7 @@ enum bpf_attach_type { #define BPF_NOEXIST 1 /* create new element if it didn't exist */ #define BPF_EXIST 2 /* update existing element */ +/* flags for BPF_MAP_CREATE command */ #define BPF_F_NO_PREALLOC (1U << 0) /* Instead of having one common LRU list in the * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list @@ -161,6 +172,8 @@ enum bpf_attach_type { * across different LRU lists. */ #define BPF_F_NO_COMMON_LRU (1U << 1) +/* Specify numa node during map creation */ +#define BPF_F_NUMA_NODE (1U << 2) union bpf_attr { struct { /* anonymous struct used by BPF_MAP_CREATE command */ @@ -168,8 +181,13 @@ union bpf_attr { __u32 key_size; /* size of key in bytes */ __u32 value_size; /* size of value in bytes */ __u32 max_entries; /* max number of entries in a map */ - __u32 map_flags; /* prealloc or not */ + __u32 map_flags; /* BPF_MAP_CREATE related + * flags defined above. + */ __u32 inner_map_fd; /* fd pointing to the inner map */ + __u32 numa_node; /* numa node (effective only if + * BPF_F_NUMA_NODE is set). + */ }; struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ @@ -344,9 +362,20 @@ union bpf_attr { * int bpf_redirect(ifindex, flags) * redirect to another netdev * @ifindex: ifindex of the net device - * @flags: bit 0 - if set, redirect to ingress instead of egress - * other bits - reserved - * Return: TC_ACT_REDIRECT + * @flags: + * cls_bpf: + * bit 0 - if set, redirect to ingress instead of egress + * other bits - reserved + * xdp_bpf: + * all bits - reserved + * Return: cls_bpf: TC_ACT_REDIRECT on success or TC_ACT_SHOT on error + * xdp_bfp: XDP_REDIRECT on success or XDP_ABORT on error + * int bpf_redirect_map(map, key, flags) + * redirect to endpoint in map + * @map: pointer to dev map + * @key: index in map to lookup + * @flags: -- + * Return: XDP_REDIRECT on success or XDP_ABORT on error * * u32 bpf_get_route_realm(skb) * retrieve a dst's tclassid @@ -539,6 +568,20 @@ union bpf_attr { * @mode: operation mode (enum bpf_adj_room_mode) * @flags: reserved for future use * Return: 0 on success or negative error code + * + * int bpf_sk_redirect_map(map, key, flags) + * Redirect skb to a sock in map using key as a lookup key for the + * sock in map. + * @map: pointer to sockmap + * @key: key to lookup sock in map + * @flags: reserved for future use + * Return: SK_REDIRECT + * + * int bpf_sock_map_update(skops, map, key, flags) + * @skops: pointer to bpf_sock_ops + * @map: pointer to sockmap to update + * @key: key to insert/update sock in map + * @flags: same flags as map update elem */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -591,7 +634,10 @@ union bpf_attr { FN(get_socket_uid), \ FN(set_hash), \ FN(setsockopt), \ - FN(skb_adjust_room), + FN(skb_adjust_room), \ + FN(redirect_map), \ + FN(sk_redirect_map), \ + FN(sock_map_update), \ /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -668,6 +714,15 @@ struct __sk_buff { __u32 data; __u32 data_end; __u32 napi_id; + + /* accessed by BPF_PROG_TYPE_sk_skb types */ + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ }; struct bpf_tunnel_key { @@ -703,6 +758,8 @@ struct bpf_sock { __u32 family; __u32 type; __u32 protocol; + __u32 mark; + __u32 priority; }; #define XDP_PACKET_HEADROOM 256 @@ -717,6 +774,7 @@ enum xdp_action { XDP_DROP, XDP_PASS, XDP_TX, + XDP_REDIRECT, }; /* user accessible metadata for XDP packet hook @@ -727,6 +785,12 @@ struct xdp_md { __u32 data_end; }; +enum sk_action { + SK_ABORTED = 0, + SK_DROP, + SK_REDIRECT, +}; + #define BPF_TAG_SIZE 8 struct bpf_prog_info { diff --git a/include/uapi/linux/cec-funcs.h b/include/uapi/linux/cec-funcs.h index c451eec42a83..270b251a3d9b 100644 --- a/include/uapi/linux/cec-funcs.h +++ b/include/uapi/linux/cec-funcs.h @@ -895,6 +895,7 @@ static inline void cec_ops_report_features(const struct cec_msg *msg, *cec_version = msg->msg[2]; *all_device_types = msg->msg[3]; *rc_profile = p; + *dev_features = NULL; while (p < &msg->msg[14] && (*p & CEC_OP_FEAT_EXT)) p++; if (!(*p & CEC_OP_FEAT_EXT)) { diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h index 44579a24f95d..4351c3481aea 100644 --- a/include/uapi/linux/cec.h +++ b/include/uapi/linux/cec.h @@ -318,6 +318,7 @@ static inline int cec_is_unconfigured(__u16 log_addr_mask) #define CEC_MODE_FOLLOWER (0x1 << 4) #define CEC_MODE_EXCL_FOLLOWER (0x2 << 4) #define CEC_MODE_EXCL_FOLLOWER_PASSTHRU (0x3 << 4) +#define CEC_MODE_MONITOR_PIN (0xd << 4) #define CEC_MODE_MONITOR (0xe << 4) #define CEC_MODE_MONITOR_ALL (0xf << 4) #define CEC_MODE_FOLLOWER_MSK 0xf0 @@ -338,6 +339,8 @@ static inline int cec_is_unconfigured(__u16 log_addr_mask) #define CEC_CAP_MONITOR_ALL (1 << 5) /* Hardware can use CEC only if the HDMI HPD pin is high. */ #define CEC_CAP_NEEDS_HPD (1 << 6) +/* Hardware can monitor CEC pin transitions */ +#define CEC_CAP_MONITOR_PIN (1 << 7) /** * struct cec_caps - CEC capabilities structure. @@ -405,8 +408,11 @@ struct cec_log_addrs { * didn't empty the message queue in time */ #define CEC_EVENT_LOST_MSGS 2 +#define CEC_EVENT_PIN_CEC_LOW 3 +#define CEC_EVENT_PIN_CEC_HIGH 4 #define CEC_EVENT_FL_INITIAL_STATE (1 << 0) +#define CEC_EVENT_FL_DROPPED_EVENTS (1 << 1) /** * struct cec_event_state_change - used when the CEC adapter changes state. @@ -419,7 +425,7 @@ struct cec_event_state_change { }; /** - * struct cec_event_lost_msgs - tells you how many messages were lost due. + * struct cec_event_lost_msgs - tells you how many messages were lost. * @lost_msgs: how many messages were lost. */ struct cec_event_lost_msgs { diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index b0e807ac53bb..0cbca96c66b9 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -226,4 +226,22 @@ enum devlink_dpipe_action_type { DEVLINK_DPIPE_ACTION_TYPE_FIELD_MODIFY, }; +enum devlink_dpipe_field_ethernet_id { + DEVLINK_DPIPE_FIELD_ETHERNET_DST_MAC, +}; + +enum devlink_dpipe_field_ipv4_id { + DEVLINK_DPIPE_FIELD_IPV4_DST_IP, +}; + +enum devlink_dpipe_field_ipv6_id { + DEVLINK_DPIPE_FIELD_IPV6_DST_IP, +}; + +enum devlink_dpipe_header_id { + DEVLINK_DPIPE_HEADER_ETHERNET, + DEVLINK_DPIPE_HEADER_IPV4, + DEVLINK_DPIPE_HEADER_IPV6, +}; + #endif /* _UAPI_LINUX_DEVLINK_H_ */ diff --git a/include/uapi/linux/dlm_netlink.h b/include/uapi/linux/dlm_netlink.h index 647c8ef27227..ef1e2e08769a 100644 --- a/include/uapi/linux/dlm_netlink.h +++ b/include/uapi/linux/dlm_netlink.h @@ -10,6 +10,7 @@ #define _DLM_NETLINK_H #include <linux/types.h> +#include <linux/dlmconstants.h> enum { DLM_STATUS_WAITING = 1, diff --git a/include/uapi/linux/dvb/ca.h b/include/uapi/linux/dvb/ca.h index c18537f3e449..cb150029fdff 100644 --- a/include/uapi/linux/dvb/ca.h +++ b/include/uapi/linux/dvb/ca.h @@ -24,67 +24,131 @@ #ifndef _DVBCA_H_ #define _DVBCA_H_ -/* slot interface types and info */ - -typedef struct ca_slot_info { - int num; /* slot number */ +/** + * struct ca_slot_info - CA slot interface types and info. + * + * @num: slot number. + * @type: slot type. + * @flags: flags applicable to the slot. + * + * This struct stores the CA slot information. + * + * @type can be: + * + * - %CA_CI - CI high level interface; + * - %CA_CI_LINK - CI link layer level interface; + * - %CA_CI_PHYS - CI physical layer level interface; + * - %CA_DESCR - built-in descrambler; + * - %CA_SC -simple smart card interface. + * + * @flags can be: + * + * - %CA_CI_MODULE_PRESENT - module (or card) inserted; + * - %CA_CI_MODULE_READY - module is ready for usage. + */ - int type; /* CA interface this slot supports */ -#define CA_CI 1 /* CI high level interface */ -#define CA_CI_LINK 2 /* CI link layer level interface */ -#define CA_CI_PHYS 4 /* CI physical layer level interface */ -#define CA_DESCR 8 /* built-in descrambler */ -#define CA_SC 128 /* simple smart card interface */ +struct ca_slot_info { + int num; + int type; +#define CA_CI 1 +#define CA_CI_LINK 2 +#define CA_CI_PHYS 4 +#define CA_DESCR 8 +#define CA_SC 128 unsigned int flags; -#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */ +#define CA_CI_MODULE_PRESENT 1 #define CA_CI_MODULE_READY 2 -} ca_slot_info_t; - +}; -/* descrambler types and info */ -typedef struct ca_descr_info { - unsigned int num; /* number of available descramblers (keys) */ - unsigned int type; /* type of supported scrambling system */ +/** + * struct ca_descr_info - descrambler types and info. + * + * @num: number of available descramblers (keys). + * @type: type of supported scrambling system. + * + * Identifies the number of descramblers and their type. + * + * @type can be: + * + * - %CA_ECD - European Common Descrambler (ECD) hardware; + * - %CA_NDS - Videoguard (NDS) hardware; + * - %CA_DSS - Distributed Sample Scrambling (DSS) hardware. + */ +struct ca_descr_info { + unsigned int num; + unsigned int type; #define CA_ECD 1 #define CA_NDS 2 #define CA_DSS 4 -} ca_descr_info_t; +}; -typedef struct ca_caps { - unsigned int slot_num; /* total number of CA card and module slots */ - unsigned int slot_type; /* OR of all supported types */ - unsigned int descr_num; /* total number of descrambler slots (keys) */ - unsigned int descr_type; /* OR of all supported types */ -} ca_caps_t; +/** + * struct ca_caps - CA slot interface capabilities. + * + * @slot_num: total number of CA card and module slots. + * @slot_type: bitmap with all supported types as defined at + * &struct ca_slot_info (e. g. %CA_CI, %CA_CI_LINK, etc). + * @descr_num: total number of descrambler slots (keys) + * @descr_type: bitmap with all supported types as defined at + * &struct ca_descr_info (e. g. %CA_ECD, %CA_NDS, etc). + */ +struct ca_caps { + unsigned int slot_num; + unsigned int slot_type; + unsigned int descr_num; + unsigned int descr_type; +}; -/* a message to/from a CI-CAM */ -typedef struct ca_msg { +/** + * struct ca_msg - a message to/from a CI-CAM + * + * @index: unused + * @type: unused + * @length: length of the message + * @msg: message + * + * This struct carries a message to be send/received from a CI CA module. + */ +struct ca_msg { unsigned int index; unsigned int type; unsigned int length; unsigned char msg[256]; -} ca_msg_t; +}; -typedef struct ca_descr { +/** + * struct ca_descr - CA descrambler control words info + * + * @index: CA Descrambler slot + * @parity: control words parity, where 0 means even and 1 means odd + * @cw: CA Descrambler control words + */ +struct ca_descr { unsigned int index; - unsigned int parity; /* 0 == even, 1 == odd */ + unsigned int parity; unsigned char cw[8]; -} ca_descr_t; - -typedef struct ca_pid { - unsigned int pid; - int index; /* -1 == disable*/ -} ca_pid_t; +}; #define CA_RESET _IO('o', 128) -#define CA_GET_CAP _IOR('o', 129, ca_caps_t) -#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t) -#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t) -#define CA_GET_MSG _IOR('o', 132, ca_msg_t) -#define CA_SEND_MSG _IOW('o', 133, ca_msg_t) -#define CA_SET_DESCR _IOW('o', 134, ca_descr_t) -#define CA_SET_PID _IOW('o', 135, ca_pid_t) +#define CA_GET_CAP _IOR('o', 129, struct ca_caps) +#define CA_GET_SLOT_INFO _IOR('o', 130, struct ca_slot_info) +#define CA_GET_DESCR_INFO _IOR('o', 131, struct ca_descr_info) +#define CA_GET_MSG _IOR('o', 132, struct ca_msg) +#define CA_SEND_MSG _IOW('o', 133, struct ca_msg) +#define CA_SET_DESCR _IOW('o', 134, struct ca_descr) + +#if !defined(__KERNEL__) + +/* This is needed for legacy userspace support */ +typedef struct ca_slot_info ca_slot_info_t; +typedef struct ca_descr_info ca_descr_info_t; +typedef struct ca_caps ca_caps_t; +typedef struct ca_msg ca_msg_t; +typedef struct ca_descr ca_descr_t; + +#endif + #endif diff --git a/include/uapi/linux/dvb/dmx.h b/include/uapi/linux/dvb/dmx.h index 427e4899ed69..4aa5f6a1815a 100644 --- a/include/uapi/linux/dvb/dmx.h +++ b/include/uapi/linux/dvb/dmx.h @@ -32,28 +32,74 @@ #define DMX_FILTER_SIZE 16 -enum dmx_output -{ - DMX_OUT_DECODER, /* Streaming directly to decoder. */ - DMX_OUT_TAP, /* Output going to a memory buffer */ - /* (to be retrieved via the read command).*/ - DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */ - /* (to be retrieved by reading from the */ - /* logical DVR device). */ - DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */ +/** + * enum dmx_output - Output for the demux. + * + * @DMX_OUT_DECODER: + * Streaming directly to decoder. + * @DMX_OUT_TAP: + * Output going to a memory buffer (to be retrieved via the read command). + * Delivers the stream output to the demux device on which the ioctl + * is called. + * @DMX_OUT_TS_TAP: + * Output multiplexed into a new TS (to be retrieved by reading from the + * logical DVR device). Routes output to the logical DVR device + * ``/dev/dvb/adapter?/dvr?``, which delivers a TS multiplexed from all + * filters for which @DMX_OUT_TS_TAP was specified. + * @DMX_OUT_TSDEMUX_TAP: + * Like @DMX_OUT_TS_TAP but retrieved from the DMX device. + */ +enum dmx_output { + DMX_OUT_DECODER, + DMX_OUT_TAP, + DMX_OUT_TS_TAP, + DMX_OUT_TSDEMUX_TAP }; -typedef enum dmx_output dmx_output_t; -typedef enum dmx_input -{ - DMX_IN_FRONTEND, /* Input from a front-end device. */ - DMX_IN_DVR /* Input from the logical DVR device. */ -} dmx_input_t; +/** + * enum dmx_input - Input from the demux. + * + * @DMX_IN_FRONTEND: Input from a front-end device. + * @DMX_IN_DVR: Input from the logical DVR device. + */ +enum dmx_input { + DMX_IN_FRONTEND, + DMX_IN_DVR +}; +/** + * enum dmx_ts_pes - type of the PES filter. + * + * @DMX_PES_AUDIO0: first audio PID. Also referred as @DMX_PES_AUDIO. + * @DMX_PES_VIDEO0: first video PID. Also referred as @DMX_PES_VIDEO. + * @DMX_PES_TELETEXT0: first teletext PID. Also referred as @DMX_PES_TELETEXT. + * @DMX_PES_SUBTITLE0: first subtitle PID. Also referred as @DMX_PES_SUBTITLE. + * @DMX_PES_PCR0: first Program Clock Reference PID. + * Also referred as @DMX_PES_PCR. + * + * @DMX_PES_AUDIO1: second audio PID. + * @DMX_PES_VIDEO1: second video PID. + * @DMX_PES_TELETEXT1: second teletext PID. + * @DMX_PES_SUBTITLE1: second subtitle PID. + * @DMX_PES_PCR1: second Program Clock Reference PID. + * + * @DMX_PES_AUDIO2: third audio PID. + * @DMX_PES_VIDEO2: third video PID. + * @DMX_PES_TELETEXT2: third teletext PID. + * @DMX_PES_SUBTITLE2: third subtitle PID. + * @DMX_PES_PCR2: third Program Clock Reference PID. + * + * @DMX_PES_AUDIO3: fourth audio PID. + * @DMX_PES_VIDEO3: fourth video PID. + * @DMX_PES_TELETEXT3: fourth teletext PID. + * @DMX_PES_SUBTITLE3: fourth subtitle PID. + * @DMX_PES_PCR3: fourth Program Clock Reference PID. + * + * @DMX_PES_OTHER: any other PID. + */ -typedef enum dmx_ts_pes -{ +enum dmx_ts_pes { DMX_PES_AUDIO0, DMX_PES_VIDEO0, DMX_PES_TELETEXT0, @@ -79,7 +125,7 @@ typedef enum dmx_ts_pes DMX_PES_PCR3, DMX_PES_OTHER -} dmx_pes_type_t; +}; #define DMX_PES_AUDIO DMX_PES_AUDIO0 #define DMX_PES_VIDEO DMX_PES_VIDEO0 @@ -88,56 +134,80 @@ typedef enum dmx_ts_pes #define DMX_PES_PCR DMX_PES_PCR0 -typedef struct dmx_filter -{ + +/** + * struct dmx_filter - Specifies a section header filter. + * + * @filter: bit array with bits to be matched at the section header. + * @mask: bits that are valid at the filter bit array. + * @mode: mode of match: if bit is zero, it will match if equal (positive + * match); if bit is one, it will match if the bit is negated. + * + * Note: All arrays in this struct have a size of DMX_FILTER_SIZE (16 bytes). + */ +struct dmx_filter { __u8 filter[DMX_FILTER_SIZE]; __u8 mask[DMX_FILTER_SIZE]; __u8 mode[DMX_FILTER_SIZE]; -} dmx_filter_t; - +}; -struct dmx_sct_filter_params -{ - __u16 pid; - dmx_filter_t filter; - __u32 timeout; - __u32 flags; +/** + * struct dmx_sct_filter_params - Specifies a section filter. + * + * @pid: PID to be filtered. + * @filter: section header filter, as defined by &struct dmx_filter. + * @timeout: maximum time to filter, in milliseconds. + * @flags: extra flags for the section filter. + * + * Carries the configuration for a MPEG-TS section filter. + * + * The @flags can be: + * + * - %DMX_CHECK_CRC - only deliver sections where the CRC check succeeded; + * - %DMX_ONESHOT - disable the section filter after one section + * has been delivered; + * - %DMX_IMMEDIATE_START - Start filter immediately without requiring a + * :ref:`DMX_START`. + */ +struct dmx_sct_filter_params { + __u16 pid; + struct dmx_filter filter; + __u32 timeout; + __u32 flags; #define DMX_CHECK_CRC 1 #define DMX_ONESHOT 2 #define DMX_IMMEDIATE_START 4 -#define DMX_KERNEL_CLIENT 0x8000 }; - -struct dmx_pes_filter_params -{ - __u16 pid; - dmx_input_t input; - dmx_output_t output; - dmx_pes_type_t pes_type; - __u32 flags; +/** + * struct dmx_pes_filter_params - Specifies Packetized Elementary Stream (PES) + * filter parameters. + * + * @pid: PID to be filtered. + * @input: Demux input, as specified by &enum dmx_input. + * @output: Demux output, as specified by &enum dmx_output. + * @pes_type: Type of the pes filter, as specified by &enum dmx_pes_type. + * @flags: Demux PES flags. + */ +struct dmx_pes_filter_params { + __u16 pid; + enum dmx_input input; + enum dmx_output output; + enum dmx_ts_pes pes_type; + __u32 flags; }; -typedef struct dmx_caps { - __u32 caps; - int num_decoders; -} dmx_caps_t; - -typedef enum dmx_source { - DMX_SOURCE_FRONT0 = 0, - DMX_SOURCE_FRONT1, - DMX_SOURCE_FRONT2, - DMX_SOURCE_FRONT3, - DMX_SOURCE_DVR0 = 16, - DMX_SOURCE_DVR1, - DMX_SOURCE_DVR2, - DMX_SOURCE_DVR3 -} dmx_source_t; - +/** + * struct dmx_stc - Stores System Time Counter (STC) information. + * + * @num: input data: number of the STC, from 0 to N. + * @base: output: divisor for STC to get 90 kHz clock. + * @stc: output: stc in @base * 90 kHz units. + */ struct dmx_stc { - unsigned int num; /* input : which STC? 0..N */ - unsigned int base; /* output: divisor for stc to get 90 kHz clock */ - __u64 stc; /* output: stc in 'base'*90 kHz units */ + unsigned int num; + unsigned int base; + __u64 stc; }; #define DMX_START _IO('o', 41) @@ -146,10 +216,18 @@ struct dmx_stc { #define DMX_SET_PES_FILTER _IOW('o', 44, struct dmx_pes_filter_params) #define DMX_SET_BUFFER_SIZE _IO('o', 45) #define DMX_GET_PES_PIDS _IOR('o', 47, __u16[5]) -#define DMX_GET_CAPS _IOR('o', 48, dmx_caps_t) -#define DMX_SET_SOURCE _IOW('o', 49, dmx_source_t) #define DMX_GET_STC _IOWR('o', 50, struct dmx_stc) #define DMX_ADD_PID _IOW('o', 51, __u16) #define DMX_REMOVE_PID _IOW('o', 52, __u16) +#if !defined(__KERNEL__) + +/* This is needed for legacy userspace support */ +typedef enum dmx_output dmx_output_t; +typedef enum dmx_input dmx_input_t; +typedef enum dmx_ts_pes dmx_pes_type_t; +typedef struct dmx_filter dmx_filter_t; + +#endif + #endif /* _UAPI_DVBDMX_H_ */ diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index 00a20cd21ee2..861cacd5711f 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -28,13 +28,46 @@ #include <linux/types.h> -enum fe_type { - FE_QPSK, - FE_QAM, - FE_OFDM, - FE_ATSC -}; - +/** + * enum fe_caps - Frontend capabilities + * + * @FE_IS_STUPID: There's something wrong at the + * frontend, and it can't report its + * capabilities. + * @FE_CAN_INVERSION_AUTO: Can auto-detect frequency spectral + * band inversion + * @FE_CAN_FEC_1_2: Supports FEC 1/2 + * @FE_CAN_FEC_2_3: Supports FEC 2/3 + * @FE_CAN_FEC_3_4: Supports FEC 3/4 + * @FE_CAN_FEC_4_5: Supports FEC 4/5 + * @FE_CAN_FEC_5_6: Supports FEC 5/6 + * @FE_CAN_FEC_6_7: Supports FEC 6/7 + * @FE_CAN_FEC_7_8: Supports FEC 7/8 + * @FE_CAN_FEC_8_9: Supports FEC 8/9 + * @FE_CAN_FEC_AUTO: Can auto-detect FEC + * @FE_CAN_QPSK: Supports QPSK modulation + * @FE_CAN_QAM_16: Supports 16-QAM modulation + * @FE_CAN_QAM_32: Supports 32-QAM modulation + * @FE_CAN_QAM_64: Supports 64-QAM modulation + * @FE_CAN_QAM_128: Supports 128-QAM modulation + * @FE_CAN_QAM_256: Supports 256-QAM modulation + * @FE_CAN_QAM_AUTO: Can auto-detect QAM modulation + * @FE_CAN_TRANSMISSION_MODE_AUTO: Can auto-detect transmission mode + * @FE_CAN_BANDWIDTH_AUTO: Can auto-detect bandwidth + * @FE_CAN_GUARD_INTERVAL_AUTO: Can auto-detect guard interval + * @FE_CAN_HIERARCHY_AUTO: Can auto-detect hierarchy + * @FE_CAN_8VSB: Supports 8-VSB modulation + * @FE_CAN_16VSB: Supporta 16-VSB modulation + * @FE_HAS_EXTENDED_CAPS: Unused + * @FE_CAN_MULTISTREAM: Supports multistream filtering + * @FE_CAN_TURBO_FEC: Supports "turbo FEC" modulation + * @FE_CAN_2G_MODULATION: Supports "2nd generation" modulation, + * e. g. DVB-S2, DVB-T2, DVB-C2 + * @FE_NEEDS_BENDING: Unused + * @FE_CAN_RECOVER: Can recover from a cable unplug + * automatically + * @FE_CAN_MUTE_TS: Can stop spurious TS data output + */ enum fe_caps { FE_IS_STUPID = 0, FE_CAN_INVERSION_AUTO = 0x1, @@ -60,15 +93,55 @@ enum fe_caps { FE_CAN_HIERARCHY_AUTO = 0x100000, FE_CAN_8VSB = 0x200000, FE_CAN_16VSB = 0x400000, - FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */ - FE_CAN_MULTISTREAM = 0x4000000, /* frontend supports multistream filtering */ - FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */ - FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */ - FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */ - FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */ - FE_CAN_MUTE_TS = 0x80000000 /* frontend can stop spurious TS data output */ + FE_HAS_EXTENDED_CAPS = 0x800000, + FE_CAN_MULTISTREAM = 0x4000000, + FE_CAN_TURBO_FEC = 0x8000000, + FE_CAN_2G_MODULATION = 0x10000000, + FE_NEEDS_BENDING = 0x20000000, + FE_CAN_RECOVER = 0x40000000, + FE_CAN_MUTE_TS = 0x80000000 +}; + +/* + * DEPRECATED: Should be kept just due to backward compatibility. + */ +enum fe_type { + FE_QPSK, + FE_QAM, + FE_OFDM, + FE_ATSC }; +/** + * struct dvb_frontend_info - Frontend properties and capabilities + * + * @name: Name of the frontend + * @type: **DEPRECATED**. + * Should not be used on modern programs, + * as a frontend may have more than one type. + * In order to get the support types of a given + * frontend, use :c:type:`DTV_ENUM_DELSYS` + * instead. + * @frequency_min: Minimal frequency supported by the frontend. + * @frequency_max: Minimal frequency supported by the frontend. + * @frequency_stepsize: All frequencies are multiple of this value. + * @frequency_tolerance: Frequency tolerance. + * @symbol_rate_min: Minimal symbol rate, in bauds + * (for Cable/Satellite systems). + * @symbol_rate_max: Maximal symbol rate, in bauds + * (for Cable/Satellite systems). + * @symbol_rate_tolerance: Maximal symbol rate tolerance, in ppm + * (for Cable/Satellite systems). + * @notifier_delay: **DEPRECATED**. Not used by any driver. + * @caps: Capabilities supported by the frontend, + * as specified in &enum fe_caps. + * + * .. note: + * + * #. The frequencies are specified in Hz for Terrestrial and Cable + * systems. + * #. The frequencies are specified in kHz for Satellite systems. + */ struct dvb_frontend_info { char name[128]; enum fe_type type; /* DEPRECATED. Use DTV_ENUM_DELSYS instead */ @@ -78,55 +151,105 @@ struct dvb_frontend_info { __u32 frequency_tolerance; __u32 symbol_rate_min; __u32 symbol_rate_max; - __u32 symbol_rate_tolerance; /* ppm */ + __u32 symbol_rate_tolerance; __u32 notifier_delay; /* DEPRECATED */ enum fe_caps caps; }; - /** - * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for - * the meaning of this struct... + * struct dvb_diseqc_master_cmd - DiSEqC master command + * + * @msg: + * DiSEqC message to be sent. It contains a 3 bytes header with: + * framing + address + command, and an optional argument + * of up to 3 bytes of data. + * @msg_len: + * Length of the DiSEqC message. Valid values are 3 to 6. + * + * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for + * the possible messages that can be used. */ struct dvb_diseqc_master_cmd { - __u8 msg [6]; /* { framing, address, command, data [3] } */ - __u8 msg_len; /* valid values are 3...6 */ + __u8 msg[6]; + __u8 msg_len; }; +/** + * struct dvb_diseqc_slave_reply - DiSEqC received data + * + * @msg: + * DiSEqC message buffer to store a message received via DiSEqC. + * It contains one byte header with: framing and + * an optional argument of up to 3 bytes of data. + * @msg_len: + * Length of the DiSEqC message. Valid values are 0 to 4, + * where 0 means no message. + * @timeout: + * Return from ioctl after timeout ms with errorcode when + * no message was received. + * + * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for + * the possible messages that can be used. + */ struct dvb_diseqc_slave_reply { - __u8 msg [4]; /* { framing, data [3] } */ - __u8 msg_len; /* valid values are 0...4, 0 means no msg */ - int timeout; /* return from ioctl after timeout ms with */ -}; /* errorcode when no message was received */ + __u8 msg[4]; + __u8 msg_len; + int timeout; +}; +/** + * enum fe_sec_voltage - DC Voltage used to feed the LNBf + * + * @SEC_VOLTAGE_13: Output 13V to the LNBf + * @SEC_VOLTAGE_18: Output 18V to the LNBf + * @SEC_VOLTAGE_OFF: Don't feed the LNBf with a DC voltage + */ enum fe_sec_voltage { SEC_VOLTAGE_13, SEC_VOLTAGE_18, SEC_VOLTAGE_OFF }; +/** + * enum fe_sec_tone_mode - Type of tone to be send to the LNBf. + * @SEC_TONE_ON: Sends a 22kHz tone burst to the antenna. + * @SEC_TONE_OFF: Don't send a 22kHz tone to the antenna (except + * if the ``FE_DISEQC_*`` ioctls are called). + */ enum fe_sec_tone_mode { SEC_TONE_ON, SEC_TONE_OFF }; +/** + * enum fe_sec_mini_cmd - Type of mini burst to be sent + * + * @SEC_MINI_A: Sends a mini-DiSEqC 22kHz '0' Tone Burst to select + * satellite-A + * @SEC_MINI_B: Sends a mini-DiSEqC 22kHz '1' Data Burst to select + * satellite-B + */ enum fe_sec_mini_cmd { SEC_MINI_A, SEC_MINI_B }; /** - * enum fe_status - enumerates the possible frontend status - * @FE_HAS_SIGNAL: found something above the noise level - * @FE_HAS_CARRIER: found a DVB signal - * @FE_HAS_VITERBI: FEC is stable - * @FE_HAS_SYNC: found sync bytes - * @FE_HAS_LOCK: everything's working - * @FE_TIMEDOUT: no lock within the last ~2 seconds - * @FE_REINIT: frontend was reinitialized, application is recommended - * to reset DiSEqC, tone and parameters + * enum fe_status - Enumerates the possible frontend status. + * @FE_NONE: The frontend doesn't have any kind of lock. + * That's the initial frontend status + * @FE_HAS_SIGNAL: Has found something above the noise level. + * @FE_HAS_CARRIER: Has found a signal. + * @FE_HAS_VITERBI: FEC inner coding (Viterbi, LDPC or other inner code). + * is stable. + * @FE_HAS_SYNC: Synchronization bytes was found. + * @FE_HAS_LOCK: Digital TV were locked and everything is working. + * @FE_TIMEDOUT: Fo lock within the last about 2 seconds. + * @FE_REINIT: Frontend was reinitialized, application is recommended + * to reset DiSEqC, tone and parameters. */ enum fe_status { + FE_NONE = 0x00, FE_HAS_SIGNAL = 0x01, FE_HAS_CARRIER = 0x02, FE_HAS_VITERBI = 0x04, @@ -136,12 +259,45 @@ enum fe_status { FE_REINIT = 0x40, }; +/** + * enum fe_spectral_inversion - Type of inversion band + * + * @INVERSION_OFF: Don't do spectral band inversion. + * @INVERSION_ON: Do spectral band inversion. + * @INVERSION_AUTO: Autodetect spectral band inversion. + * + * This parameter indicates if spectral inversion should be presumed or + * not. In the automatic setting (``INVERSION_AUTO``) the hardware will try + * to figure out the correct setting by itself. If the hardware doesn't + * support, the %dvb_frontend will try to lock at the carrier first with + * inversion off. If it fails, it will try to enable inversion. + */ enum fe_spectral_inversion { INVERSION_OFF, INVERSION_ON, INVERSION_AUTO }; +/** + * enum fe_code_rate - Type of Forward Error Correction (FEC) + * + * + * @FEC_NONE: No Forward Error Correction Code + * @FEC_1_2: Forward Error Correction Code 1/2 + * @FEC_2_3: Forward Error Correction Code 2/3 + * @FEC_3_4: Forward Error Correction Code 3/4 + * @FEC_4_5: Forward Error Correction Code 4/5 + * @FEC_5_6: Forward Error Correction Code 5/6 + * @FEC_6_7: Forward Error Correction Code 6/7 + * @FEC_7_8: Forward Error Correction Code 7/8 + * @FEC_8_9: Forward Error Correction Code 8/9 + * @FEC_AUTO: Autodetect Error Correction Code + * @FEC_3_5: Forward Error Correction Code 3/5 + * @FEC_9_10: Forward Error Correction Code 9/10 + * @FEC_2_5: Forward Error Correction Code 2/5 + * + * Please note that not all FEC types are supported by a given standard. + */ enum fe_code_rate { FEC_NONE = 0, FEC_1_2, @@ -158,6 +314,26 @@ enum fe_code_rate { FEC_2_5, }; +/** + * enum fe_modulation - Type of modulation/constellation + * @QPSK: QPSK modulation + * @QAM_16: 16-QAM modulation + * @QAM_32: 32-QAM modulation + * @QAM_64: 64-QAM modulation + * @QAM_128: 128-QAM modulation + * @QAM_256: 256-QAM modulation + * @QAM_AUTO: Autodetect QAM modulation + * @VSB_8: 8-VSB modulation + * @VSB_16: 16-VSB modulation + * @PSK_8: 8-PSK modulation + * @APSK_16: 16-APSK modulation + * @APSK_32: 32-APSK modulation + * @DQPSK: DQPSK modulation + * @QAM_4_NR: 4-QAM-NR modulation + * + * Please note that not all modulations are supported by a given standard. + * + */ enum fe_modulation { QPSK, QAM_16, @@ -175,6 +351,32 @@ enum fe_modulation { QAM_4_NR, }; +/** + * enum fe_transmit_mode - Transmission mode + * + * @TRANSMISSION_MODE_AUTO: + * Autodetect transmission mode. The hardware will try to find the + * correct FFT-size (if capable) to fill in the missing parameters. + * @TRANSMISSION_MODE_1K: + * Transmission mode 1K + * @TRANSMISSION_MODE_2K: + * Transmission mode 2K + * @TRANSMISSION_MODE_8K: + * Transmission mode 8K + * @TRANSMISSION_MODE_4K: + * Transmission mode 4K + * @TRANSMISSION_MODE_16K: + * Transmission mode 16K + * @TRANSMISSION_MODE_32K: + * Transmission mode 32K + * @TRANSMISSION_MODE_C1: + * Single Carrier (C=1) transmission mode (DTMB only) + * @TRANSMISSION_MODE_C3780: + * Multi Carrier (C=3780) transmission mode (DTMB only) + * + * Please note that not all transmission modes are supported by a given + * standard. + */ enum fe_transmit_mode { TRANSMISSION_MODE_2K, TRANSMISSION_MODE_8K, @@ -187,6 +389,23 @@ enum fe_transmit_mode { TRANSMISSION_MODE_C3780, }; +/** + * enum fe_guard_interval - Guard interval + * + * @GUARD_INTERVAL_AUTO: Autodetect the guard interval + * @GUARD_INTERVAL_1_128: Guard interval 1/128 + * @GUARD_INTERVAL_1_32: Guard interval 1/32 + * @GUARD_INTERVAL_1_16: Guard interval 1/16 + * @GUARD_INTERVAL_1_8: Guard interval 1/8 + * @GUARD_INTERVAL_1_4: Guard interval 1/4 + * @GUARD_INTERVAL_19_128: Guard interval 19/128 + * @GUARD_INTERVAL_19_256: Guard interval 19/256 + * @GUARD_INTERVAL_PN420: PN length 420 (1/4) + * @GUARD_INTERVAL_PN595: PN length 595 (1/6) + * @GUARD_INTERVAL_PN945: PN length 945 (1/9) + * + * Please note that not all guard intervals are supported by a given standard. + */ enum fe_guard_interval { GUARD_INTERVAL_1_32, GUARD_INTERVAL_1_16, @@ -201,6 +420,16 @@ enum fe_guard_interval { GUARD_INTERVAL_PN945, }; +/** + * enum fe_hierarchy - Hierarchy + * @HIERARCHY_NONE: No hierarchy + * @HIERARCHY_AUTO: Autodetect hierarchy (if supported) + * @HIERARCHY_1: Hierarchy 1 + * @HIERARCHY_2: Hierarchy 2 + * @HIERARCHY_4: Hierarchy 4 + * + * Please note that not all hierarchy types are supported by a given standard. + */ enum fe_hierarchy { HIERARCHY_NONE, HIERARCHY_1, @@ -209,6 +438,15 @@ enum fe_hierarchy { HIERARCHY_AUTO }; +/** + * enum fe_interleaving - Interleaving + * @INTERLEAVING_NONE: No interleaving. + * @INTERLEAVING_AUTO: Auto-detect interleaving. + * @INTERLEAVING_240: Interleaving of 240 symbols. + * @INTERLEAVING_720: Interleaving of 720 symbols. + * + * Please note that, currently, only DTMB uses it. + */ enum fe_interleaving { INTERLEAVING_NONE, INTERLEAVING_AUTO, @@ -216,7 +454,8 @@ enum fe_interleaving { INTERLEAVING_720, }; -/* S2API Commands */ +/* DVBv5 property Commands */ + #define DTV_UNDEFINED 0 #define DTV_TUNE 1 #define DTV_CLEAR 2 @@ -309,19 +548,79 @@ enum fe_interleaving { #define DTV_MAX_COMMAND DTV_STAT_TOTAL_BLOCK_COUNT +/** + * enum fe_pilot - Type of pilot tone + * + * @PILOT_ON: Pilot tones enabled + * @PILOT_OFF: Pilot tones disabled + * @PILOT_AUTO: Autodetect pilot tones + */ enum fe_pilot { PILOT_ON, PILOT_OFF, PILOT_AUTO, }; +/** + * enum fe_rolloff - Rolloff factor + * @ROLLOFF_35: Roloff factor: α=35% + * @ROLLOFF_20: Roloff factor: α=20% + * @ROLLOFF_25: Roloff factor: α=25% + * @ROLLOFF_AUTO: Auto-detect the roloff factor. + * + * .. note: + * + * Roloff factor of 35% is implied on DVB-S. On DVB-S2, it is default. + */ enum fe_rolloff { - ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */ + ROLLOFF_35, ROLLOFF_20, ROLLOFF_25, ROLLOFF_AUTO, }; +/** + * enum fe_delivery_system - Type of the delivery system + * + * @SYS_UNDEFINED: + * Undefined standard. Generally, indicates an error + * @SYS_DVBC_ANNEX_A: + * Cable TV: DVB-C following ITU-T J.83 Annex A spec + * @SYS_DVBC_ANNEX_B: + * Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM) + * @SYS_DVBC_ANNEX_C: + * Cable TV: DVB-C following ITU-T J.83 Annex C spec + * @SYS_ISDBC: + * Cable TV: ISDB-C (no drivers yet) + * @SYS_DVBT: + * Terrestrial TV: DVB-T + * @SYS_DVBT2: + * Terrestrial TV: DVB-T2 + * @SYS_ISDBT: + * Terrestrial TV: ISDB-T + * @SYS_ATSC: + * Terrestrial TV: ATSC + * @SYS_ATSCMH: + * Terrestrial TV (mobile): ATSC-M/H + * @SYS_DTMB: + * Terrestrial TV: DTMB + * @SYS_DVBS: + * Satellite TV: DVB-S + * @SYS_DVBS2: + * Satellite TV: DVB-S2 + * @SYS_TURBO: + * Satellite TV: DVB-S Turbo + * @SYS_ISDBS: + * Satellite TV: ISDB-S + * @SYS_DAB: + * Digital audio: DAB (not fully supported) + * @SYS_DSS: + * Satellite TV: DSS (not fully supported) + * @SYS_CMMB: + * Terrestrial TV (mobile): CMMB (not fully supported) + * @SYS_DVBH: + * Terrestrial TV (mobile): DVB-H (standard deprecated) + */ enum fe_delivery_system { SYS_UNDEFINED, SYS_DVBC_ANNEX_A, @@ -344,35 +643,85 @@ enum fe_delivery_system { SYS_DVBC_ANNEX_C, }; -/* backward compatibility */ +/* backward compatibility definitions for delivery systems */ #define SYS_DVBC_ANNEX_AC SYS_DVBC_ANNEX_A -#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB instead */ +#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB */ -/* ATSC-MH */ +/* ATSC-MH specific parameters */ +/** + * enum atscmh_sccc_block_mode - Type of Series Concatenated Convolutional + * Code Block Mode. + * + * @ATSCMH_SCCC_BLK_SEP: + * Separate SCCC: the SCCC outer code mode shall be set independently + * for each Group Region (A, B, C, D) + * @ATSCMH_SCCC_BLK_COMB: + * Combined SCCC: all four Regions shall have the same SCCC outer + * code mode. + * @ATSCMH_SCCC_BLK_RES: + * Reserved. Shouldn't be used. + */ enum atscmh_sccc_block_mode { ATSCMH_SCCC_BLK_SEP = 0, ATSCMH_SCCC_BLK_COMB = 1, ATSCMH_SCCC_BLK_RES = 2, }; +/** + * enum atscmh_sccc_code_mode - Type of Series Concatenated Convolutional + * Code Rate. + * + * @ATSCMH_SCCC_CODE_HLF: + * The outer code rate of a SCCC Block is 1/2 rate. + * @ATSCMH_SCCC_CODE_QTR: + * The outer code rate of a SCCC Block is 1/4 rate. + * @ATSCMH_SCCC_CODE_RES: + * Reserved. Should not be used. + */ enum atscmh_sccc_code_mode { ATSCMH_SCCC_CODE_HLF = 0, ATSCMH_SCCC_CODE_QTR = 1, ATSCMH_SCCC_CODE_RES = 2, }; +/** + * enum atscmh_rs_frame_ensemble - Reed Solomon(RS) frame ensemble. + * + * @ATSCMH_RSFRAME_ENS_PRI: Primary Ensemble. + * @ATSCMH_RSFRAME_ENS_SEC: Secondary Ensemble. + */ enum atscmh_rs_frame_ensemble { ATSCMH_RSFRAME_ENS_PRI = 0, ATSCMH_RSFRAME_ENS_SEC = 1, }; +/** + * enum atscmh_rs_frame_mode - Reed Solomon (RS) frame mode. + * + * @ATSCMH_RSFRAME_PRI_ONLY: + * Single Frame: There is only a primary RS Frame for all Group + * Regions. + * @ATSCMH_RSFRAME_PRI_SEC: + * Dual Frame: There are two separate RS Frames: Primary RS Frame for + * Group Region A and B and Secondary RS Frame for Group Region C and + * D. + * @ATSCMH_RSFRAME_RES: + * Reserved. Shouldn't be used. + */ enum atscmh_rs_frame_mode { ATSCMH_RSFRAME_PRI_ONLY = 0, ATSCMH_RSFRAME_PRI_SEC = 1, ATSCMH_RSFRAME_RES = 2, }; +/** + * enum atscmh_rs_code_mode + * @ATSCMH_RSCODE_211_187: Reed Solomon code (211,187). + * @ATSCMH_RSCODE_223_187: Reed Solomon code (223,187). + * @ATSCMH_RSCODE_235_187: Reed Solomon code (235,187). + * @ATSCMH_RSCODE_RES: Reserved. Shouldn't be used. + */ enum atscmh_rs_code_mode { ATSCMH_RSCODE_211_187 = 0, ATSCMH_RSCODE_223_187 = 1, @@ -383,28 +732,18 @@ enum atscmh_rs_code_mode { #define NO_STREAM_ID_FILTER (~0U) #define LNA_AUTO (~0U) -struct dtv_cmds_h { - char *name; /* A display name for debugging purposes */ - - __u32 cmd; /* A unique ID */ - - /* Flags */ - __u32 set:1; /* Either a set or get property */ - __u32 buffer:1; /* Does this property use the buffer? */ - __u32 reserved:30; /* Align */ -}; - /** - * Scale types for the quality parameters. + * enum fecap_scale_params - scale types for the quality parameters. + * * @FE_SCALE_NOT_AVAILABLE: That QoS measure is not available. That * could indicate a temporary or a permanent * condition. * @FE_SCALE_DECIBEL: The scale is measured in 0.001 dB steps, typically - * used on signal measures. + * used on signal measures. * @FE_SCALE_RELATIVE: The scale is a relative percentual measure, - * ranging from 0 (0%) to 0xffff (100%). + * ranging from 0 (0%) to 0xffff (100%). * @FE_SCALE_COUNTER: The scale counts the occurrence of an event, like - * bit error, block error, lapsed time. + * bit error, block error, lapsed time. */ enum fecap_scale_params { FE_SCALE_NOT_AVAILABLE = 0, @@ -416,24 +755,38 @@ enum fecap_scale_params { /** * struct dtv_stats - Used for reading a DTV status property * - * @value: value of the measure. Should range from 0 to 0xffff; * @scale: Filled with enum fecap_scale_params - the scale * in usage for that parameter * + * The ``{unnamed_union}`` may have either one of the values below: + * + * %svalue + * integer value of the measure, for %FE_SCALE_DECIBEL, + * used for dB measures. The unit is 0.001 dB. + * + * %uvalue + * unsigned integer value of the measure, used when @scale is + * either %FE_SCALE_RELATIVE or %FE_SCALE_COUNTER. + * * For most delivery systems, this will return a single value for each * parameter. + * * It should be noticed, however, that new OFDM delivery systems like * ISDB can use different modulation types for each group of carriers. * On such standards, up to 8 groups of statistics can be provided, one * for each carrier group (called "layer" on ISDB). + * * In order to be consistent with other delivery systems, the first * value refers to the entire set of carriers ("global"). - * dtv_status:scale should use the value FE_SCALE_NOT_AVAILABLE when + * + * @scale should use the value %FE_SCALE_NOT_AVAILABLE when * the value for the entire group of carriers or from one specific layer * is not provided by the hardware. - * st.len should be filled with the latest filled status + 1. * - * In other words, for ISDB, those values should be filled like: + * @len should be filled with the latest filled status + 1. + * + * In other words, for ISDB, those values should be filled like:: + * * u.st.stat.svalue[0] = global statistics; * u.st.stat.scale[0] = FE_SCALE_DECIBEL; * u.st.stat.value[1] = layer A statistics; @@ -455,11 +808,39 @@ struct dtv_stats { #define MAX_DTV_STATS 4 +/** + * struct dtv_fe_stats - store Digital TV frontend statistics + * + * @len: length of the statistics - if zero, stats is disabled. + * @stat: array with digital TV statistics. + * + * On most standards, @len can either be 0 or 1. However, for ISDB, each + * layer is modulated in separate. So, each layer may have its own set + * of statistics. If so, stat[0] carries on a global value for the property. + * Indexes 1 to 3 means layer A to B. + */ struct dtv_fe_stats { __u8 len; struct dtv_stats stat[MAX_DTV_STATS]; } __attribute__ ((packed)); +/** + * struct dtv_property - store one of frontend command and its value + * + * @cmd: Digital TV command. + * @reserved: Not used. + * @u: Union with the values for the command. + * @result: Result of the command set (currently unused). + * + * The @u union may have either one of the values below: + * + * %data + * an unsigned 32-bits number. + * %st + * a &struct dtv_fe_stats array of statistics. + * %buffer + * a buffer of up to 32 characters (currently unused). + */ struct dtv_property { __u32 cmd; __u32 reserved[3]; @@ -479,17 +860,70 @@ struct dtv_property { /* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ #define DTV_IOCTL_MAX_MSGS 64 +/** + * struct dtv_properties - a set of command/value pairs. + * + * @num: amount of commands stored at the struct. + * @props: a pointer to &struct dtv_property. + */ struct dtv_properties { __u32 num; struct dtv_property *props; }; -#if defined(__DVB_CORE__) || !defined (__KERNEL__) +/* + * When set, this flag will disable any zigzagging or other "normal" tuning + * behavior. Additionally, there will be no automatic monitoring of the lock + * status, and hence no frontend events will be generated. If a frontend device + * is closed, this flag will be automatically turned off when the device is + * reopened read-write. + */ +#define FE_TUNE_MODE_ONESHOT 0x01 + +/* Digital TV Frontend API calls */ + +#define FE_GET_INFO _IOR('o', 61, struct dvb_frontend_info) + +#define FE_DISEQC_RESET_OVERLOAD _IO('o', 62) +#define FE_DISEQC_SEND_MASTER_CMD _IOW('o', 63, struct dvb_diseqc_master_cmd) +#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply) +#define FE_DISEQC_SEND_BURST _IO('o', 65) /* fe_sec_mini_cmd_t */ + +#define FE_SET_TONE _IO('o', 66) /* fe_sec_tone_mode_t */ +#define FE_SET_VOLTAGE _IO('o', 67) /* fe_sec_voltage_t */ +#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68) /* int */ + +#define FE_READ_STATUS _IOR('o', 69, fe_status_t) +#define FE_READ_BER _IOR('o', 70, __u32) +#define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16) +#define FE_READ_SNR _IOR('o', 72, __u16) +#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32) + +#define FE_SET_FRONTEND_TUNE_MODE _IO('o', 81) /* unsigned int */ +#define FE_GET_EVENT _IOR('o', 78, struct dvb_frontend_event) + +#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */ + +#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties) +#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties) + +#if defined(__DVB_CORE__) || !defined(__KERNEL__) + +/* + * DEPRECATED: Everything below is deprecated in favor of DVBv5 API + * + * The DVBv3 only ioctls, structs and enums should not be used on + * newer programs, as it doesn't support the second generation of + * digital TV standards, nor supports newer delivery systems. + * They also don't support modern frontends with usually support multiple + * delivery systems. + * + * Drivers shouldn't use them. + * + * New applications should use DVBv5 delivery system instead + */ /* - * DEPRECATED: The DVBv3 ioctls, structs and enums should not be used on - * newer programs, as it doesn't support the second generation of digital - * TV standards, nor supports newer delivery systems. */ enum fe_bandwidth { @@ -502,7 +936,7 @@ enum fe_bandwidth { BANDWIDTH_1_712_MHZ, }; -/* This is needed for legacy userspace support */ +/* This is kept for legacy userspace support */ typedef enum fe_sec_voltage fe_sec_voltage_t; typedef enum fe_caps fe_caps_t; typedef enum fe_type fe_type_t; @@ -520,6 +954,8 @@ typedef enum fe_pilot fe_pilot_t; typedef enum fe_rolloff fe_rolloff_t; typedef enum fe_delivery_system fe_delivery_system_t; +/* DVBv3 structs */ + struct dvb_qpsk_parameters { __u32 symbol_rate; /* symbol rate in Symbols per second */ fe_code_rate_t fec_inner; /* forward error correction (see above) */ @@ -546,8 +982,8 @@ struct dvb_ofdm_parameters { }; struct dvb_frontend_parameters { - __u32 frequency; /* (absolute) frequency in Hz for DVB-C/DVB-T/ATSC */ - /* intermediate frequency in kHz for DVB-S */ + __u32 frequency; /* (absolute) frequency in Hz for DVB-C/DVB-T/ATSC */ + /* intermediate frequency in kHz for DVB-S */ fe_spectral_inversion_t inversion; union { struct dvb_qpsk_parameters qpsk; /* DVB-S */ @@ -561,42 +997,12 @@ struct dvb_frontend_event { fe_status_t status; struct dvb_frontend_parameters parameters; }; -#endif -#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties) -#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties) - -/** - * When set, this flag will disable any zigzagging or other "normal" tuning - * behaviour. Additionally, there will be no automatic monitoring of the lock - * status, and hence no frontend events will be generated. If a frontend device - * is closed, this flag will be automatically turned off when the device is - * reopened read-write. - */ -#define FE_TUNE_MODE_ONESHOT 0x01 - -#define FE_GET_INFO _IOR('o', 61, struct dvb_frontend_info) - -#define FE_DISEQC_RESET_OVERLOAD _IO('o', 62) -#define FE_DISEQC_SEND_MASTER_CMD _IOW('o', 63, struct dvb_diseqc_master_cmd) -#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply) -#define FE_DISEQC_SEND_BURST _IO('o', 65) /* fe_sec_mini_cmd_t */ - -#define FE_SET_TONE _IO('o', 66) /* fe_sec_tone_mode_t */ -#define FE_SET_VOLTAGE _IO('o', 67) /* fe_sec_voltage_t */ -#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68) /* int */ - -#define FE_READ_STATUS _IOR('o', 69, fe_status_t) -#define FE_READ_BER _IOR('o', 70, __u32) -#define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16) -#define FE_READ_SNR _IOR('o', 72, __u16) -#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32) +/* DVBv3 API calls */ #define FE_SET_FRONTEND _IOW('o', 76, struct dvb_frontend_parameters) #define FE_GET_FRONTEND _IOR('o', 77, struct dvb_frontend_parameters) -#define FE_SET_FRONTEND_TUNE_MODE _IO('o', 81) /* unsigned int */ -#define FE_GET_EVENT _IOR('o', 78, struct dvb_frontend_event) -#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */ +#endif #endif /*_DVBFRONTEND_H_*/ diff --git a/include/uapi/linux/dvb/net.h b/include/uapi/linux/dvb/net.h index f451e7eb0b0b..89d805f9a5a6 100644 --- a/include/uapi/linux/dvb/net.h +++ b/include/uapi/linux/dvb/net.h @@ -26,6 +26,21 @@ #include <linux/types.h> +/** + * struct dvb_net_if - describes a DVB network interface + * + * @pid: Packet ID (PID) of the MPEG-TS that contains data + * @if_num: number of the Digital TV interface. + * @feedtype: Encapsulation type of the feed. + * + * A MPEG-TS stream may contain packet IDs with IP packages on it. + * This struct describes it, and the type of encoding. + * + * @feedtype can be: + * + * - %DVB_NET_FEEDTYPE_MPE for MPE encoding + * - %DVB_NET_FEEDTYPE_ULE for ULE encoding. + */ struct dvb_net_if { __u16 pid; __u16 if_num; diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h index 07bdce1f444a..78fdf52d6b2f 100644 --- a/include/uapi/linux/errqueue.h +++ b/include/uapi/linux/errqueue.h @@ -18,10 +18,13 @@ struct sock_extended_err { #define SO_EE_ORIGIN_ICMP 2 #define SO_EE_ORIGIN_ICMP6 3 #define SO_EE_ORIGIN_TXSTATUS 4 +#define SO_EE_ORIGIN_ZEROCOPY 5 #define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS #define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1)) +#define SO_EE_CODE_ZEROCOPY_COPIED 1 + /** * struct scm_timestamping - timestamps exposed through cmsg * diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 7d4a594d5d58..9c041dae8e2c 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1238,6 +1238,47 @@ struct ethtool_per_queue_op { char data[]; }; +/** + * struct ethtool_fecparam - Ethernet forward error correction(fec) parameters + * @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM + * @active_fec: FEC mode which is active on porte + * @fec: Bitmask of supported/configured FEC modes + * @rsvd: Reserved for future extensions. i.e FEC bypass feature. + * + * Drivers should reject a non-zero setting of @autoneg when + * autoneogotiation is disabled (or not supported) for the link. + * + */ +struct ethtool_fecparam { + __u32 cmd; + /* bitmask of FEC modes */ + __u32 active_fec; + __u32 fec; + __u32 reserved; +}; + +/** + * enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration + * @ETHTOOL_FEC_NONE: FEC mode configuration is not supported + * @ETHTOOL_FEC_AUTO: Default/Best FEC mode provided by driver + * @ETHTOOL_FEC_OFF: No FEC Mode + * @ETHTOOL_FEC_RS: Reed-Solomon Forward Error Detection mode + * @ETHTOOL_FEC_BASER: Base-R/Reed-Solomon Forward Error Detection mode + */ +enum ethtool_fec_config_bits { + ETHTOOL_FEC_NONE_BIT, + ETHTOOL_FEC_AUTO_BIT, + ETHTOOL_FEC_OFF_BIT, + ETHTOOL_FEC_RS_BIT, + ETHTOOL_FEC_BASER_BIT, +}; + +#define ETHTOOL_FEC_NONE (1 << ETHTOOL_FEC_NONE_BIT) +#define ETHTOOL_FEC_AUTO (1 << ETHTOOL_FEC_AUTO_BIT) +#define ETHTOOL_FEC_OFF (1 << ETHTOOL_FEC_OFF_BIT) +#define ETHTOOL_FEC_RS (1 << ETHTOOL_FEC_RS_BIT) +#define ETHTOOL_FEC_BASER (1 << ETHTOOL_FEC_BASER_BIT) + /* CMDs currently supported */ #define ETHTOOL_GSET 0x00000001 /* DEPRECATED, Get settings. * Please use ETHTOOL_GLINKSETTINGS @@ -1330,6 +1371,8 @@ struct ethtool_per_queue_op { #define ETHTOOL_SLINKSETTINGS 0x0000004d /* Set ethtool_link_settings */ #define ETHTOOL_PHY_GTUNABLE 0x0000004e /* Get PHY tunable configuration */ #define ETHTOOL_PHY_STUNABLE 0x0000004f /* Set PHY tunable configuration */ +#define ETHTOOL_GFECPARAM 0x00000050 /* Get FEC settings */ +#define ETHTOOL_SFECPARAM 0x00000051 /* Set FEC settings */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET @@ -1387,6 +1430,9 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_2500baseT_Full_BIT = 47, ETHTOOL_LINK_MODE_5000baseT_Full_BIT = 48, + ETHTOOL_LINK_MODE_FEC_NONE_BIT = 49, + ETHTOOL_LINK_MODE_FEC_RS_BIT = 50, + ETHTOOL_LINK_MODE_FEC_BASER_BIT = 51, /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_* @@ -1395,7 +1441,7 @@ enum ethtool_link_mode_bit_indices { */ __ETHTOOL_LINK_MODE_LAST - = ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + = ETHTOOL_LINK_MODE_FEC_BASER_BIT, }; #define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \ diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index b7495d05e8de..56235dddea7d 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -358,13 +358,25 @@ struct fscrypt_key { #define SYNC_FILE_RANGE_WRITE 2 #define SYNC_FILE_RANGE_WAIT_AFTER 4 -/* flags for preadv2/pwritev2: */ -#define RWF_HIPRI 0x00000001 /* high priority request, poll if possible */ -#define RWF_DSYNC 0x00000002 /* per-IO O_DSYNC */ -#define RWF_SYNC 0x00000004 /* per-IO O_SYNC */ -#define RWF_NOWAIT 0x00000008 /* per-IO, return -EAGAIN if operation would block */ - -#define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC |\ - RWF_NOWAIT) +/* + * Flags for preadv2/pwritev2: + */ + +typedef int __bitwise __kernel_rwf_t; + +/* high priority request, poll if possible */ +#define RWF_HIPRI ((__force __kernel_rwf_t)0x00000001) + +/* per-IO O_DSYNC */ +#define RWF_DSYNC ((__force __kernel_rwf_t)0x00000002) + +/* per-IO O_SYNC */ +#define RWF_SYNC ((__force __kernel_rwf_t)0x00000004) + +/* per-IO, return -EAGAIN if operation would block */ +#define RWF_NOWAIT ((__force __kernel_rwf_t)0x00000008) + +/* mask of flags supported by the kernel */ +#define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT) #endif /* _UAPI_LINUX_FS_H */ diff --git a/include/uapi/linux/fsmap.h b/include/uapi/linux/fsmap.h index 7e8e5f0bd6d2..e5213c3e38b2 100644 --- a/include/uapi/linux/fsmap.h +++ b/include/uapi/linux/fsmap.h @@ -96,7 +96,7 @@ fsmap_advance( #define FMR_OF_EXTENT_MAP 0x4 /* segment = extent map */ #define FMR_OF_SHARED 0x8 /* segment = shared with another file */ #define FMR_OF_SPECIAL_OWNER 0x10 /* owner is a special value */ -#define FMR_OF_LAST 0x20 /* segment is the last in the FS */ +#define FMR_OF_LAST 0x20 /* segment is the last in the dataset */ /* Each FS gets to define its own special owner codes. */ #define FMR_OWNER(type, code) (((__u64)type << 32) | \ diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h index cf73510b9238..a2a635620600 100644 --- a/include/uapi/linux/if_arp.h +++ b/include/uapi/linux/if_arp.h @@ -59,6 +59,7 @@ #define ARPHRD_LAPB 516 /* LAPB */ #define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */ #define ARPHRD_RAWHDLC 518 /* Raw HDLC */ +#define ARPHRD_RAWIP 519 /* Raw IP */ #define ARPHRD_TUNNEL 768 /* IPIP tunnel */ #define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */ diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 5bc9bfd816b7..9037065e23d0 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -66,6 +66,7 @@ #define ETH_P_ATALK 0x809B /* Appletalk DDP */ #define ETH_P_AARP 0x80F3 /* Appletalk AARP */ #define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ +#define ETH_P_ERSPAN 0x88BE /* ERSPAN type II */ #define ETH_P_IPX 0x8137 /* IPX over DIX */ #define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ #define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */ @@ -98,11 +99,13 @@ #define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ #define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */ #define ETH_P_HSR 0x892F /* IEC 62439-3 HSRv1 */ +#define ETH_P_NSH 0x894F /* Network Service Header */ #define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */ #define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less than this value @@ -137,6 +140,9 @@ #define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ #define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ #define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */ +#define ETH_P_MAP 0x00F9 /* Qualcomm multiplexing and + * aggregation protocol + */ /* * This is an Ethernet frame header. diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h index 6792d1967d31..2e520883c054 100644 --- a/include/uapi/linux/if_tunnel.h +++ b/include/uapi/linux/if_tunnel.h @@ -134,6 +134,7 @@ enum { IFLA_GRE_COLLECT_METADATA, IFLA_GRE_IGNORE_DF, IFLA_GRE_FWMARK, + IFLA_GRE_ERSPAN_INDEX, __IFLA_GRE_MAX, }; diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h index bbe201047df6..f52ff62bfabe 100644 --- a/include/uapi/linux/inet_diag.h +++ b/include/uapi/linux/inet_diag.h @@ -142,6 +142,8 @@ enum { INET_DIAG_PAD, INET_DIAG_MARK, INET_DIAG_BBRINFO, + INET_DIAG_CLASS_ID, + INET_DIAG_MD5SIG, __INET_DIAG_MAX, }; diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index d6833426fdef..7b4567bacfc2 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -232,6 +232,35 @@ struct kfd_ioctl_wait_events_args { uint32_t wait_result; /* from KFD */ }; +struct kfd_ioctl_set_scratch_backing_va_args { + uint64_t va_addr; /* to KFD */ + uint32_t gpu_id; /* to KFD */ + uint32_t pad; +}; + +struct kfd_ioctl_get_tile_config_args { + /* to KFD: pointer to tile array */ + uint64_t tile_config_ptr; + /* to KFD: pointer to macro tile array */ + uint64_t macro_tile_config_ptr; + /* to KFD: array size allocated by user mode + * from KFD: array size filled by kernel + */ + uint32_t num_tile_configs; + /* to KFD: array size allocated by user mode + * from KFD: array size filled by kernel + */ + uint32_t num_macro_tile_configs; + + uint32_t gpu_id; /* to KFD */ + uint32_t gb_addr_config; /* from KFD */ + uint32_t num_banks; /* from KFD */ + uint32_t num_ranks; /* from KFD */ + /* struct size can be extended later if needed + * without breaking ABI compatibility + */ +}; + #define AMDKFD_IOCTL_BASE 'K' #define AMDKFD_IO(nr) _IO(AMDKFD_IOCTL_BASE, nr) #define AMDKFD_IOR(nr, type) _IOR(AMDKFD_IOCTL_BASE, nr, type) @@ -286,7 +315,13 @@ struct kfd_ioctl_wait_events_args { #define AMDKFD_IOC_DBG_WAVE_CONTROL \ AMDKFD_IOW(0x10, struct kfd_ioctl_dbg_wave_control_args) +#define AMDKFD_IOC_SET_SCRATCH_BACKING_VA \ + AMDKFD_IOWR(0x11, struct kfd_ioctl_set_scratch_backing_va_args) + +#define AMDKFD_IOC_GET_TILE_CONFIG \ + AMDKFD_IOWR(0x12, struct kfd_ioctl_get_tile_config_args) + #define AMDKFD_COMMAND_START 0x01 -#define AMDKFD_COMMAND_END 0x11 +#define AMDKFD_COMMAND_END 0x13 #endif diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h index a3960f98679c..c8125ec1f4f2 100644 --- a/include/uapi/linux/loop.h +++ b/include/uapi/linux/loop.h @@ -22,7 +22,6 @@ enum { LO_FLAGS_AUTOCLEAR = 4, LO_FLAGS_PARTSCAN = 8, LO_FLAGS_DIRECT_IO = 16, - LO_FLAGS_BLOCKSIZE = 32, }; #include <asm/posix_types.h> /* for __kernel_old_dev_t */ @@ -60,8 +59,6 @@ struct loop_info64 { __u64 lo_init[2]; }; -#define LO_INFO_BLOCKSIZE(l) (l)->lo_init[0] - /* * Loop filter types */ diff --git a/include/uapi/linux/lwtunnel.h b/include/uapi/linux/lwtunnel.h index 92724cba1eba..7fdd19ca7511 100644 --- a/include/uapi/linux/lwtunnel.h +++ b/include/uapi/linux/lwtunnel.h @@ -11,6 +11,7 @@ enum lwtunnel_encap_types { LWTUNNEL_ENCAP_IP6, LWTUNNEL_ENCAP_SEG6, LWTUNNEL_ENCAP_BPF, + LWTUNNEL_ENCAP_SEG6_LOCAL, __LWTUNNEL_ENCAP_MAX, }; diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index fac96c64fe51..4865f1e71339 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -30,8 +30,6 @@ #include <linux/types.h> #include <linux/version.h> -#define MEDIA_API_VERSION KERNEL_VERSION(0, 1, 0) - struct media_device_info { char driver[16]; char model[32]; @@ -187,6 +185,9 @@ struct media_device_info { #define MEDIA_ENT_T_V4L2_SUBDEV_LENS MEDIA_ENT_F_LENS #define MEDIA_ENT_T_V4L2_SUBDEV_DECODER MEDIA_ENT_F_ATV_DECODER #define MEDIA_ENT_T_V4L2_SUBDEV_TUNER MEDIA_ENT_F_TUNER + +/* Obsolete symbol for media_version, no longer used in the kernel */ +#define MEDIA_API_VERSION KERNEL_VERSION(0, 1, 0) #endif /* Entity flags */ diff --git a/include/uapi/linux/membarrier.h b/include/uapi/linux/membarrier.h index e0b108bd2624..6d47b3249d8a 100644 --- a/include/uapi/linux/membarrier.h +++ b/include/uapi/linux/membarrier.h @@ -40,14 +40,33 @@ * (non-running threads are de facto in such a * state). This covers threads from all processes * running on the system. This command returns 0. + * @MEMBARRIER_CMD_PRIVATE_EXPEDITED: + * Execute a memory barrier on each running + * thread belonging to the same process as the current + * thread. Upon return from system call, the + * caller thread is ensured that all its running + * threads siblings have passed through a state + * where all memory accesses to user-space + * addresses match program order between entry + * to and return from the system call + * (non-running threads are de facto in such a + * state). This only covers threads from the + * same processes as the caller thread. This + * command returns 0. The "expedited" commands + * complete faster than the non-expedited ones, + * they never block, but have the downside of + * causing extra overhead. * * Command to be passed to the membarrier system call. The commands need to * be a single bit each, except for MEMBARRIER_CMD_QUERY which is assigned to * the value 0. */ enum membarrier_cmd { - MEMBARRIER_CMD_QUERY = 0, - MEMBARRIER_CMD_SHARED = (1 << 0), + MEMBARRIER_CMD_QUERY = 0, + MEMBARRIER_CMD_SHARED = (1 << 0), + /* reserved for MEMBARRIER_CMD_SHARED_EXPEDITED (1 << 1) */ + /* reserved for MEMBARRIER_CMD_PRIVATE (1 << 2) */ + MEMBARRIER_CMD_PRIVATE_EXPEDITED = (1 << 3), }; #endif /* _UAPI_LINUX_MEMBARRIER_H */ diff --git a/include/uapi/linux/memfd.h b/include/uapi/linux/memfd.h index 534e364bda92..7f3a722dbd72 100644 --- a/include/uapi/linux/memfd.h +++ b/include/uapi/linux/memfd.h @@ -1,8 +1,32 @@ #ifndef _UAPI_LINUX_MEMFD_H #define _UAPI_LINUX_MEMFD_H +#include <asm-generic/hugetlb_encode.h> + /* flags for memfd_create(2) (unsigned int) */ #define MFD_CLOEXEC 0x0001U #define MFD_ALLOW_SEALING 0x0002U +#define MFD_HUGETLB 0x0004U + +/* + * Huge page size encoding when MFD_HUGETLB is specified, and a huge page + * size other than the default is desired. See hugetlb_encode.h. + * All known huge page size encodings are provided here. It is the + * responsibility of the application to know which sizes are supported on + * the running system. See mmap(2) man page for details. + */ +#define MFD_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT +#define MFD_HUGE_MASK HUGETLB_FLAG_ENCODE_MASK + +#define MFD_HUGE_64KB HUGETLB_FLAG_ENCODE_64KB +#define MFD_HUGE_512KB HUGETLB_FLAG_ENCODE_512KB +#define MFD_HUGE_1MB HUGETLB_FLAG_ENCODE_1MB +#define MFD_HUGE_2MB HUGETLB_FLAG_ENCODE_2MB +#define MFD_HUGE_8MB HUGETLB_FLAG_ENCODE_8MB +#define MFD_HUGE_16MB HUGETLB_FLAG_ENCODE_16MB +#define MFD_HUGE_256MB HUGETLB_FLAG_ENCODE_256MB +#define MFD_HUGE_1GB HUGETLB_FLAG_ENCODE_1GB +#define MFD_HUGE_2GB HUGETLB_FLAG_ENCODE_2GB +#define MFD_HUGE_16GB HUGETLB_FLAG_ENCODE_16GB #endif /* _UAPI_LINUX_MEMFD_H */ diff --git a/include/uapi/linux/mman.h b/include/uapi/linux/mman.h index ade4acd3a90c..a937480d7cd3 100644 --- a/include/uapi/linux/mman.h +++ b/include/uapi/linux/mman.h @@ -2,6 +2,7 @@ #define _UAPI_LINUX_MMAN_H #include <asm/mman.h> +#include <asm-generic/hugetlb_encode.h> #define MREMAP_MAYMOVE 1 #define MREMAP_FIXED 2 @@ -10,4 +11,25 @@ #define OVERCOMMIT_ALWAYS 1 #define OVERCOMMIT_NEVER 2 +/* + * Huge page size encoding when MAP_HUGETLB is specified, and a huge page + * size other than the default is desired. See hugetlb_encode.h. + * All known huge page size encodings are provided here. It is the + * responsibility of the application to know which sizes are supported on + * the running system. See mmap(2) man page for details. + */ +#define MAP_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT +#define MAP_HUGE_MASK HUGETLB_FLAG_ENCODE_MASK + +#define MAP_HUGE_64KB HUGETLB_FLAG_ENCODE_64KB +#define MAP_HUGE_512KB HUGETLB_FLAG_ENCODE_512KB +#define MAP_HUGE_1MB HUGETLB_FLAG_ENCODE_1MB +#define MAP_HUGE_2MB HUGETLB_FLAG_ENCODE_2MB +#define MAP_HUGE_8MB HUGETLB_FLAG_ENCODE_8MB +#define MAP_HUGE_16MB HUGETLB_FLAG_ENCODE_16MB +#define MAP_HUGE_256MB HUGETLB_FLAG_ENCODE_256MB +#define MAP_HUGE_1GB HUGETLB_FLAG_ENCODE_1GB +#define MAP_HUGE_2GB HUGETLB_FLAG_ENCODE_2GB +#define MAP_HUGE_16GB HUGETLB_FLAG_ENCODE_16GB + #endif /* _UAPI_LINUX_MMAN_H */ diff --git a/include/uapi/linux/ndctl.h b/include/uapi/linux/ndctl.h index 6d3c54264d8e..3f03567631cb 100644 --- a/include/uapi/linux/ndctl.h +++ b/include/uapi/linux/ndctl.h @@ -145,43 +145,6 @@ struct nd_cmd_clear_error { __u64 cleared; } __packed; -struct nd_cmd_trans_spa { - __u64 spa; - __u32 status; - __u8 flags; - __u8 _reserved[3]; - __u64 trans_length; - __u32 num_nvdimms; - struct nd_nvdimm_device { - __u32 nfit_device_handle; - __u32 _reserved; - __u64 dpa; - } __packed devices[0]; - -} __packed; - -struct nd_cmd_ars_err_inj { - __u64 err_inj_spa_range_base; - __u64 err_inj_spa_range_length; - __u8 err_inj_options; - __u32 status; -} __packed; - -struct nd_cmd_ars_err_inj_clr { - __u64 err_inj_clr_spa_range_base; - __u64 err_inj_clr_spa_range_length; - __u32 status; -} __packed; - -struct nd_cmd_ars_err_inj_stat { - __u32 status; - __u32 inj_err_rec_count; - struct nd_error_stat_query_record { - __u64 err_inj_stat_spa_range_base; - __u64 err_inj_stat_spa_range_length; - } __packed record[0]; -} __packed; - enum { ND_CMD_IMPLEMENTED = 0, diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index 683f6f88fcac..871afa4871bf 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -1,10 +1,11 @@ #ifndef _LINUX_NF_TABLES_H #define _LINUX_NF_TABLES_H -#define NFT_TABLE_MAXNAMELEN 32 -#define NFT_CHAIN_MAXNAMELEN 32 -#define NFT_SET_MAXNAMELEN 32 -#define NFT_OBJ_MAXNAMELEN 32 +#define NFT_NAME_MAXLEN 256 +#define NFT_TABLE_MAXNAMELEN NFT_NAME_MAXLEN +#define NFT_CHAIN_MAXNAMELEN NFT_NAME_MAXLEN +#define NFT_SET_MAXNAMELEN NFT_NAME_MAXLEN +#define NFT_OBJ_MAXNAMELEN NFT_NAME_MAXLEN #define NFT_USERDATA_MAXLEN 256 /** @@ -731,7 +732,8 @@ enum nft_exthdr_op { * @NFTA_EXTHDR_OFFSET: extension header offset (NLA_U32) * @NFTA_EXTHDR_LEN: extension header length (NLA_U32) * @NFTA_EXTHDR_FLAGS: extension header flags (NLA_U32) - * @NFTA_EXTHDR_OP: option match type (NLA_U8) + * @NFTA_EXTHDR_OP: option match type (NLA_U32) + * @NFTA_EXTHDR_SREG: option match type (NLA_U32) */ enum nft_exthdr_attributes { NFTA_EXTHDR_UNSPEC, @@ -741,6 +743,7 @@ enum nft_exthdr_attributes { NFTA_EXTHDR_LEN, NFTA_EXTHDR_FLAGS, NFTA_EXTHDR_OP, + NFTA_EXTHDR_SREG, __NFTA_EXTHDR_MAX }; #define NFTA_EXTHDR_MAX (__NFTA_EXTHDR_MAX - 1) @@ -808,11 +811,13 @@ enum nft_meta_keys { * @NFT_RT_CLASSID: realm value of packet's route (skb->dst->tclassid) * @NFT_RT_NEXTHOP4: routing nexthop for IPv4 * @NFT_RT_NEXTHOP6: routing nexthop for IPv6 + * @NFT_RT_TCPMSS: fetch current path tcp mss */ enum nft_rt_keys { NFT_RT_CLASSID, NFT_RT_NEXTHOP4, NFT_RT_NEXTHOP6, + NFT_RT_TCPMSS, }; /** @@ -1221,6 +1226,8 @@ enum nft_objref_attributes { enum nft_gen_attributes { NFTA_GEN_UNSPEC, NFTA_GEN_ID, + NFTA_GEN_PROC_PID, + NFTA_GEN_PROC_NAME, __NFTA_GEN_MAX }; #define NFTA_GEN_MAX (__NFTA_GEN_MAX - 1) @@ -1275,7 +1282,8 @@ enum nft_ct_helper_attributes { #define NFT_OBJECT_COUNTER 1 #define NFT_OBJECT_QUOTA 2 #define NFT_OBJECT_CT_HELPER 3 -#define __NFT_OBJECT_MAX 4 +#define NFT_OBJECT_LIMIT 4 +#define __NFT_OBJECT_MAX 5 #define NFT_OBJECT_MAX (__NFT_OBJECT_MAX - 1) /** diff --git a/include/uapi/linux/netfilter/xt_hashlimit.h b/include/uapi/linux/netfilter/xt_hashlimit.h index 79da349f1060..aa98573248b1 100644 --- a/include/uapi/linux/netfilter/xt_hashlimit.h +++ b/include/uapi/linux/netfilter/xt_hashlimit.h @@ -19,12 +19,13 @@ struct xt_hashlimit_htable; enum { - XT_HASHLIMIT_HASH_DIP = 1 << 0, - XT_HASHLIMIT_HASH_DPT = 1 << 1, - XT_HASHLIMIT_HASH_SIP = 1 << 2, - XT_HASHLIMIT_HASH_SPT = 1 << 3, - XT_HASHLIMIT_INVERT = 1 << 4, - XT_HASHLIMIT_BYTES = 1 << 5, + XT_HASHLIMIT_HASH_DIP = 1 << 0, + XT_HASHLIMIT_HASH_DPT = 1 << 1, + XT_HASHLIMIT_HASH_SIP = 1 << 2, + XT_HASHLIMIT_HASH_SPT = 1 << 3, + XT_HASHLIMIT_INVERT = 1 << 4, + XT_HASHLIMIT_BYTES = 1 << 5, + XT_HASHLIMIT_RATE_MATCH = 1 << 6, }; struct hashlimit_cfg { @@ -79,6 +80,21 @@ struct hashlimit_cfg2 { __u8 srcmask, dstmask; }; +struct hashlimit_cfg3 { + __u64 avg; /* Average secs between packets * scale */ + __u64 burst; /* Period multiplier for upper limit. */ + __u32 mode; /* bitmask of XT_HASHLIMIT_HASH_* */ + + /* user specified */ + __u32 size; /* how many buckets */ + __u32 max; /* max number of entries */ + __u32 gc_interval; /* gc interval */ + __u32 expire; /* when do entries expire? */ + + __u32 interval; + __u8 srcmask, dstmask; +}; + struct xt_hashlimit_mtinfo1 { char name[IFNAMSIZ]; struct hashlimit_cfg1 cfg; @@ -95,4 +111,12 @@ struct xt_hashlimit_mtinfo2 { struct xt_hashlimit_htable *hinfo __attribute__((aligned(8))); }; +struct xt_hashlimit_mtinfo3 { + char name[NAME_MAX]; + struct hashlimit_cfg3 cfg; + + /* Used internally by the kernel */ + struct xt_hashlimit_htable *hinfo __attribute__((aligned(8))); +}; + #endif /* _UAPI_XT_HASHLIMIT_H */ diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h index f86127a46cfc..e8af60a7c56d 100644 --- a/include/uapi/linux/netlink.h +++ b/include/uapi/linux/netlink.h @@ -69,6 +69,9 @@ struct nlmsghdr { #define NLM_F_CREATE 0x400 /* Create, if it does not exist */ #define NLM_F_APPEND 0x800 /* Add to end of list */ +/* Modifiers to DELETE request */ +#define NLM_F_NONREC 0x100 /* Do not delete recursively */ + /* Flags for ACK message */ #define NLM_F_CAPPED 0x100 /* request was capped */ #define NLM_F_ACK_TLVS 0x200 /* extended ACK TVLs were included */ @@ -226,5 +229,22 @@ struct nlattr { #define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1)) #define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr))) +/* Generic 32 bitflags attribute content sent to the kernel. + * + * The value is a bitmap that defines the values being set + * The selector is a bitmask that defines which value is legit + * + * Examples: + * value = 0x0, and selector = 0x1 + * implies we are selecting bit 1 and we want to set its value to 0. + * + * value = 0x2, and selector = 0x2 + * implies we are selecting bit 2 and we want to set its value to 1. + * + */ +struct nla_bitfield32 { + __u32 value; + __u32 selector; +}; #endif /* _UAPI__LINUX_NETLINK_H */ diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index b1c0b187acfe..140ae638cfd6 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -139,8 +139,9 @@ enum perf_event_sample_format { PERF_SAMPLE_IDENTIFIER = 1U << 16, PERF_SAMPLE_TRANSACTION = 1U << 17, PERF_SAMPLE_REGS_INTR = 1U << 18, + PERF_SAMPLE_PHYS_ADDR = 1U << 19, - PERF_SAMPLE_MAX = 1U << 19, /* non-ABI */ + PERF_SAMPLE_MAX = 1U << 20, /* non-ABI */ }; /* @@ -174,6 +175,8 @@ enum perf_branch_sample_type_shift { PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT = 14, /* no flags */ PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT = 15, /* no cycles */ + PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT = 16, /* save branch type */ + PERF_SAMPLE_BRANCH_MAX_SHIFT /* non-ABI */ }; @@ -198,9 +201,30 @@ enum perf_branch_sample_type { PERF_SAMPLE_BRANCH_NO_FLAGS = 1U << PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT, PERF_SAMPLE_BRANCH_NO_CYCLES = 1U << PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT, + PERF_SAMPLE_BRANCH_TYPE_SAVE = + 1U << PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT, + PERF_SAMPLE_BRANCH_MAX = 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT, }; +/* + * Common flow change classification + */ +enum { + PERF_BR_UNKNOWN = 0, /* unknown */ + PERF_BR_COND = 1, /* conditional */ + PERF_BR_UNCOND = 2, /* unconditional */ + PERF_BR_IND = 3, /* indirect */ + PERF_BR_CALL = 4, /* function call */ + PERF_BR_IND_CALL = 5, /* indirect function call */ + PERF_BR_RET = 6, /* function return */ + PERF_BR_SYSCALL = 7, /* syscall */ + PERF_BR_SYSRET = 8, /* syscall return */ + PERF_BR_COND_CALL = 9, /* conditional function call */ + PERF_BR_COND_RET = 10, /* conditional function return */ + PERF_BR_MAX, +}; + #define PERF_SAMPLE_BRANCH_PLM_ALL \ (PERF_SAMPLE_BRANCH_USER|\ PERF_SAMPLE_BRANCH_KERNEL|\ @@ -791,6 +815,7 @@ enum perf_event_type { * { u64 transaction; } && PERF_SAMPLE_TRANSACTION * { u64 abi; # enum perf_sample_regs_abi * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR + * { u64 phys_addr;} && PERF_SAMPLE_PHYS_ADDR * }; */ PERF_RECORD_SAMPLE = 9, @@ -931,14 +956,20 @@ union perf_mem_data_src { mem_snoop:5, /* snoop mode */ mem_lock:2, /* lock instr */ mem_dtlb:7, /* tlb access */ - mem_rsvd:31; + mem_lvl_num:4, /* memory hierarchy level number */ + mem_remote:1, /* remote */ + mem_snoopx:2, /* snoop mode, ext */ + mem_rsvd:24; }; }; #elif defined(__BIG_ENDIAN_BITFIELD) union perf_mem_data_src { __u64 val; struct { - __u64 mem_rsvd:31, + __u64 mem_rsvd:24, + mem_snoopx:2, /* snoop mode, ext */ + mem_remote:1, /* remote */ + mem_lvl_num:4, /* memory hierarchy level number */ mem_dtlb:7, /* tlb access */ mem_lock:2, /* lock instr */ mem_snoop:5, /* snoop mode */ @@ -975,6 +1006,22 @@ union perf_mem_data_src { #define PERF_MEM_LVL_UNC 0x2000 /* Uncached memory */ #define PERF_MEM_LVL_SHIFT 5 +#define PERF_MEM_REMOTE_REMOTE 0x01 /* Remote */ +#define PERF_MEM_REMOTE_SHIFT 37 + +#define PERF_MEM_LVLNUM_L1 0x01 /* L1 */ +#define PERF_MEM_LVLNUM_L2 0x02 /* L2 */ +#define PERF_MEM_LVLNUM_L3 0x03 /* L3 */ +#define PERF_MEM_LVLNUM_L4 0x04 /* L4 */ +/* 5-0xa available */ +#define PERF_MEM_LVLNUM_ANY_CACHE 0x0b /* Any cache */ +#define PERF_MEM_LVLNUM_LFB 0x0c /* LFB */ +#define PERF_MEM_LVLNUM_RAM 0x0d /* RAM */ +#define PERF_MEM_LVLNUM_PMEM 0x0e /* PMEM */ +#define PERF_MEM_LVLNUM_NA 0x0f /* N/A */ + +#define PERF_MEM_LVLNUM_SHIFT 33 + /* snoop mode */ #define PERF_MEM_SNOOP_NA 0x01 /* not available */ #define PERF_MEM_SNOOP_NONE 0x02 /* no snoop */ @@ -983,6 +1030,10 @@ union perf_mem_data_src { #define PERF_MEM_SNOOP_HITM 0x10 /* snoop hit modified */ #define PERF_MEM_SNOOP_SHIFT 19 +#define PERF_MEM_SNOOPX_FWD 0x01 /* forward */ +/* 1 free */ +#define PERF_MEM_SNOOPX_SHIFT 37 + /* locked instruction */ #define PERF_MEM_LOCK_NA 0x01 /* not available */ #define PERF_MEM_LOCK_LOCKED 0x02 /* locked transaction */ @@ -1015,6 +1066,7 @@ union perf_mem_data_src { * in_tx: running in a hardware transaction * abort: aborting a hardware transaction * cycles: cycles from last branch (or 0 if not supported) + * type: branch type */ struct perf_branch_entry { __u64 from; @@ -1024,7 +1076,8 @@ struct perf_branch_entry { in_tx:1, /* in transaction */ abort:1, /* transaction abort */ cycles:16, /* cycle count to last branch */ - reserved:44; + type:4, /* branch type */ + reserved:40; }; #endif /* _UAPI_LINUX_PERF_EVENT_H */ diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h index d500bd224979..b9197976b660 100644 --- a/include/uapi/linux/raid/md_p.h +++ b/include/uapi/linux/raid/md_p.h @@ -324,9 +324,10 @@ struct mdp_superblock_1 { #define MD_FEATURE_RECOVERY_BITMAP 128 /* recovery that is happening * is guided by bitmap. */ -#define MD_FEATURE_CLUSTERED 256 /* clustered MD */ +#define MD_FEATURE_CLUSTERED 256 /* clustered MD */ #define MD_FEATURE_JOURNAL 512 /* support write cache */ #define MD_FEATURE_PPL 1024 /* support PPL */ +#define MD_FEATURE_MULTIPLE_PPLS 2048 /* support for multiple PPLs */ #define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ |MD_FEATURE_RECOVERY_OFFSET \ |MD_FEATURE_RESHAPE_ACTIVE \ @@ -338,6 +339,7 @@ struct mdp_superblock_1 { |MD_FEATURE_CLUSTERED \ |MD_FEATURE_JOURNAL \ |MD_FEATURE_PPL \ + |MD_FEATURE_MULTIPLE_PPLS \ ) struct r5l_payload_header { diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index d148505010a7..dab7dad9e01a 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -683,10 +683,29 @@ struct tcamsg { unsigned char tca__pad1; unsigned short tca__pad2; }; + +enum { + TCA_ROOT_UNSPEC, + TCA_ROOT_TAB, +#define TCA_ACT_TAB TCA_ROOT_TAB +#define TCAA_MAX TCA_ROOT_TAB + TCA_ROOT_FLAGS, + TCA_ROOT_COUNT, + TCA_ROOT_TIME_DELTA, /* in msecs */ + __TCA_ROOT_MAX, +#define TCA_ROOT_MAX (__TCA_ROOT_MAX - 1) +}; + #define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg)))) #define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg)) -#define TCA_ACT_TAB 1 /* attr type must be >=1 */ -#define TCAA_MAX 1 +/* tcamsg flags stored in attribute TCA_ROOT_FLAGS + * + * TCA_FLAG_LARGE_DUMP_ON user->kernel to request for larger than TCA_ACT_MAX_PRIO + * actions in a dump. All dump responses will contain the number of actions + * being dumped stored in for user app's consumption in TCA_ROOT_COUNT + * + */ +#define TCA_FLAG_LARGE_DUMP_ON (1 << 0) /* New extended info filters for IFLA_EXT_MASK */ #define RTEXT_FILTER_VF (1 << 0) diff --git a/include/uapi/linux/rxrpc.h b/include/uapi/linux/rxrpc.h new file mode 100644 index 000000000000..9656aad8f8f7 --- /dev/null +++ b/include/uapi/linux/rxrpc.h @@ -0,0 +1,124 @@ +/* Types and definitions for AF_RXRPC. + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_RXRPC_H +#define _UAPI_LINUX_RXRPC_H + +#include <linux/types.h> +#include <linux/in.h> +#include <linux/in6.h> + +/* + * RxRPC socket address + */ +struct sockaddr_rxrpc { + sa_family_t srx_family; /* address family */ + u16 srx_service; /* service desired */ + u16 transport_type; /* type of transport socket (SOCK_DGRAM) */ + u16 transport_len; /* length of transport address */ + union { + sa_family_t family; /* transport address family */ + struct sockaddr_in sin; /* IPv4 transport address */ + struct sockaddr_in6 sin6; /* IPv6 transport address */ + } transport; +}; + +/* + * RxRPC socket options + */ +#define RXRPC_SECURITY_KEY 1 /* [clnt] set client security key */ +#define RXRPC_SECURITY_KEYRING 2 /* [srvr] set ring of server security keys */ +#define RXRPC_EXCLUSIVE_CONNECTION 3 /* Deprecated; use RXRPC_EXCLUSIVE_CALL instead */ +#define RXRPC_MIN_SECURITY_LEVEL 4 /* minimum security level */ +#define RXRPC_UPGRADEABLE_SERVICE 5 /* Upgrade service[0] -> service[1] */ +#define RXRPC_SUPPORTED_CMSG 6 /* Get highest supported control message type */ + +/* + * RxRPC control messages + * - If neither abort or accept are specified, the message is a data message. + * - terminal messages mean that a user call ID tag can be recycled + * - s/r/- indicate whether these are applicable to sendmsg() and/or recvmsg() + */ +enum rxrpc_cmsg_type { + RXRPC_USER_CALL_ID = 1, /* sr: user call ID specifier */ + RXRPC_ABORT = 2, /* sr: abort request / notification [terminal] */ + RXRPC_ACK = 3, /* -r: [Service] RPC op final ACK received [terminal] */ + RXRPC_NET_ERROR = 5, /* -r: network error received [terminal] */ + RXRPC_BUSY = 6, /* -r: server busy received [terminal] */ + RXRPC_LOCAL_ERROR = 7, /* -r: local error generated [terminal] */ + RXRPC_NEW_CALL = 8, /* -r: [Service] new incoming call notification */ + RXRPC_ACCEPT = 9, /* s-: [Service] accept request */ + RXRPC_EXCLUSIVE_CALL = 10, /* s-: Call should be on exclusive connection */ + RXRPC_UPGRADE_SERVICE = 11, /* s-: Request service upgrade for client call */ + RXRPC_TX_LENGTH = 12, /* s-: Total length of Tx data */ + RXRPC__SUPPORTED +}; + +/* + * RxRPC security levels + */ +#define RXRPC_SECURITY_PLAIN 0 /* plain secure-checksummed packets only */ +#define RXRPC_SECURITY_AUTH 1 /* authenticated packets */ +#define RXRPC_SECURITY_ENCRYPT 2 /* encrypted packets */ + +/* + * RxRPC security indices + */ +#define RXRPC_SECURITY_NONE 0 /* no security protocol */ +#define RXRPC_SECURITY_RXKAD 2 /* kaserver or kerberos 4 */ +#define RXRPC_SECURITY_RXGK 4 /* gssapi-based */ +#define RXRPC_SECURITY_RXK5 5 /* kerberos 5 */ + +/* + * RxRPC-level abort codes + */ +#define RX_CALL_DEAD -1 /* call/conn has been inactive and is shut down */ +#define RX_INVALID_OPERATION -2 /* invalid operation requested / attempted */ +#define RX_CALL_TIMEOUT -3 /* call timeout exceeded */ +#define RX_EOF -4 /* unexpected end of data on read op */ +#define RX_PROTOCOL_ERROR -5 /* low-level protocol error */ +#define RX_USER_ABORT -6 /* generic user abort */ +#define RX_ADDRINUSE -7 /* UDP port in use */ +#define RX_DEBUGI_BADTYPE -8 /* bad debugging packet type */ + +/* + * (un)marshalling abort codes (rxgen) + */ +#define RXGEN_CC_MARSHAL -450 +#define RXGEN_CC_UNMARSHAL -451 +#define RXGEN_SS_MARSHAL -452 +#define RXGEN_SS_UNMARSHAL -453 +#define RXGEN_DECODE -454 +#define RXGEN_OPCODE -455 +#define RXGEN_SS_XDRFREE -456 +#define RXGEN_CC_XDRFREE -457 + +/* + * Rx kerberos security abort codes + * - unfortunately we have no generalised security abort codes to say things + * like "unsupported security", so we have to use these instead and hope the + * other side understands + */ +#define RXKADINCONSISTENCY 19270400 /* security module structure inconsistent */ +#define RXKADPACKETSHORT 19270401 /* packet too short for security challenge */ +#define RXKADLEVELFAIL 19270402 /* security level negotiation failed */ +#define RXKADTICKETLEN 19270403 /* ticket length too short or too long */ +#define RXKADOUTOFSEQUENCE 19270404 /* packet had bad sequence number */ +#define RXKADNOAUTH 19270405 /* caller not authorised */ +#define RXKADBADKEY 19270406 /* illegal key: bad parity or weak */ +#define RXKADBADTICKET 19270407 /* security object was passed a bad ticket */ +#define RXKADUNKNOWNKEY 19270408 /* ticket contained unknown key version number */ +#define RXKADEXPIRED 19270409 /* authentication expired */ +#define RXKADSEALEDINCON 19270410 /* sealed data inconsistent */ +#define RXKADDATALEN 19270411 /* user data too long */ +#define RXKADILLEGALLEVEL 19270412 /* caller not authorised to use encrypted conns */ + +#endif /* _UAPI_LINUX_RXRPC_H */ diff --git a/include/uapi/linux/seg6_iptunnel.h b/include/uapi/linux/seg6_iptunnel.h index b6e5a0a1afd7..b23df9f58354 100644 --- a/include/uapi/linux/seg6_iptunnel.h +++ b/include/uapi/linux/seg6_iptunnel.h @@ -33,16 +33,26 @@ struct seg6_iptunnel_encap { enum { SEG6_IPTUN_MODE_INLINE, SEG6_IPTUN_MODE_ENCAP, + SEG6_IPTUN_MODE_L2ENCAP, }; #ifdef __KERNEL__ static inline size_t seg6_lwt_headroom(struct seg6_iptunnel_encap *tuninfo) { - int encap = (tuninfo->mode == SEG6_IPTUN_MODE_ENCAP); - - return ((tuninfo->srh->hdrlen + 1) << 3) + - (encap * sizeof(struct ipv6hdr)); + int head = 0; + + switch (tuninfo->mode) { + case SEG6_IPTUN_MODE_INLINE: + break; + case SEG6_IPTUN_MODE_ENCAP: + head = sizeof(struct ipv6hdr); + break; + case SEG6_IPTUN_MODE_L2ENCAP: + return 0; + } + + return ((tuninfo->srh->hdrlen + 1) << 3) + head; } #endif diff --git a/include/uapi/linux/seg6_local.h b/include/uapi/linux/seg6_local.h new file mode 100644 index 000000000000..ef2d8c3e76c1 --- /dev/null +++ b/include/uapi/linux/seg6_local.h @@ -0,0 +1,68 @@ +/* + * SR-IPv6 implementation + * + * Author: + * David Lebrun <david.lebrun@uclouvain.be> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_SEG6_LOCAL_H +#define _UAPI_LINUX_SEG6_LOCAL_H + +#include <linux/seg6.h> + +enum { + SEG6_LOCAL_UNSPEC, + SEG6_LOCAL_ACTION, + SEG6_LOCAL_SRH, + SEG6_LOCAL_TABLE, + SEG6_LOCAL_NH4, + SEG6_LOCAL_NH6, + SEG6_LOCAL_IIF, + SEG6_LOCAL_OIF, + __SEG6_LOCAL_MAX, +}; +#define SEG6_LOCAL_MAX (__SEG6_LOCAL_MAX - 1) + +enum { + SEG6_LOCAL_ACTION_UNSPEC = 0, + /* node segment */ + SEG6_LOCAL_ACTION_END = 1, + /* adjacency segment (IPv6 cross-connect) */ + SEG6_LOCAL_ACTION_END_X = 2, + /* lookup of next seg NH in table */ + SEG6_LOCAL_ACTION_END_T = 3, + /* decap and L2 cross-connect */ + SEG6_LOCAL_ACTION_END_DX2 = 4, + /* decap and IPv6 cross-connect */ + SEG6_LOCAL_ACTION_END_DX6 = 5, + /* decap and IPv4 cross-connect */ + SEG6_LOCAL_ACTION_END_DX4 = 6, + /* decap and lookup of DA in v6 table */ + SEG6_LOCAL_ACTION_END_DT6 = 7, + /* decap and lookup of DA in v4 table */ + SEG6_LOCAL_ACTION_END_DT4 = 8, + /* binding segment with insertion */ + SEG6_LOCAL_ACTION_END_B6 = 9, + /* binding segment with encapsulation */ + SEG6_LOCAL_ACTION_END_B6_ENCAP = 10, + /* binding segment with MPLS encap */ + SEG6_LOCAL_ACTION_END_BM = 11, + /* lookup last seg in table */ + SEG6_LOCAL_ACTION_END_S = 12, + /* forward to SR-unaware VNF with static proxy */ + SEG6_LOCAL_ACTION_END_AS = 13, + /* forward to SR-unaware VNF with masquerading */ + SEG6_LOCAL_ACTION_END_AM = 14, + + __SEG6_LOCAL_ACTION_MAX, +}; + +#define SEG6_LOCAL_ACTION_MAX (__SEG6_LOCAL_ACTION_MAX - 1) + +#endif diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index c34a2a3eeff5..50d71c436323 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -56,8 +56,6 @@ #define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */ #define PORT_RT2880 29 /* Ralink RT2880 internal UART */ #define PORT_16550A_FSL64 30 /* Freescale 16550 UART with 64 FIFOs */ -#define PORT_DA830 31 /* TI DA8xx/66AK2x */ -#define PORT_MAX_8250 31 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -70,12 +68,17 @@ #define PORT_CLPS711X 33 #define PORT_SA1100 34 #define PORT_UART00 35 +#define PORT_OWL 36 #define PORT_21285 37 /* Sparc type numbers. */ #define PORT_SUNZILOG 38 #define PORT_SUNSAB 39 +/* Intel EG20 */ +#define PORT_PCH_8LINE 44 +#define PORT_PCH_2LINE 45 + /* DEC */ #define PORT_DZ 46 #define PORT_ZS 47 @@ -205,8 +208,8 @@ /* MAX310X */ #define PORT_MAX310X 94 -/* High Speed UART for Medfield */ -#define PORT_MFD 95 +/* TI DA8xx/66AK2x */ +#define PORT_DA830 95 /* TI OMAP-UART */ #define PORT_OMAP 96 @@ -271,4 +274,7 @@ /* MPS2 UART */ #define PORT_MPS2UART 116 +/* MediaTek BTIF */ +#define PORT_MTK_BTIF 117 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/shm.h b/include/uapi/linux/shm.h index 1fbf24ea37fd..cf23c873719d 100644 --- a/include/uapi/linux/shm.h +++ b/include/uapi/linux/shm.h @@ -3,6 +3,7 @@ #include <linux/ipc.h> #include <linux/errno.h> +#include <asm-generic/hugetlb_encode.h> #ifndef __KERNEL__ #include <unistd.h> #endif @@ -40,11 +41,37 @@ struct shmid_ds { /* Include the definition of shmid64_ds and shminfo64 */ #include <asm/shmbuf.h> -/* permission flag for shmget */ +/* + * shmget() shmflg values. + */ +/* The bottom nine bits are the same as open(2) mode flags */ #define SHM_R 0400 /* or S_IRUGO from <linux/stat.h> */ #define SHM_W 0200 /* or S_IWUGO from <linux/stat.h> */ +/* Bits 9 & 10 are IPC_CREAT and IPC_EXCL */ +#define SHM_HUGETLB 04000 /* segment will use huge TLB pages */ +#define SHM_NORESERVE 010000 /* don't check for reservations */ + +/* + * Huge page size encoding when SHM_HUGETLB is specified, and a huge page + * size other than the default is desired. See hugetlb_encode.h + */ +#define SHM_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT +#define SHM_HUGE_MASK HUGETLB_FLAG_ENCODE_MASK + +#define SHM_HUGE_64KB HUGETLB_FLAG_ENCODE_64KB +#define SHM_HUGE_512KB HUGETLB_FLAG_ENCODE_512KB +#define SHM_HUGE_1MB HUGETLB_FLAG_ENCODE_1MB +#define SHM_HUGE_2MB HUGETLB_FLAG_ENCODE_2MB +#define SHM_HUGE_8MB HUGETLB_FLAG_ENCODE_8MB +#define SHM_HUGE_16MB HUGETLB_FLAG_ENCODE_16MB +#define SHM_HUGE_256MB HUGETLB_FLAG_ENCODE_256MB +#define SHM_HUGE_1GB HUGETLB_FLAG_ENCODE_1GB +#define SHM_HUGE_2GB HUGETLB_FLAG_ENCODE_2GB +#define SHM_HUGE_16GB HUGETLB_FLAG_ENCODE_16GB -/* mode for attach */ +/* + * shmat() shmflg values + */ #define SHM_RDONLY 010000 /* read-only access */ #define SHM_RND 020000 /* round attach address to SHMLBA boundary */ #define SHM_REMAP 040000 /* take-over region on attach */ diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index d85693295798..758f12b58541 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -184,12 +184,7 @@ enum LINUX_MIB_DELAYEDACKLOST, /* DelayedACKLost */ LINUX_MIB_LISTENOVERFLOWS, /* ListenOverflows */ LINUX_MIB_LISTENDROPS, /* ListenDrops */ - LINUX_MIB_TCPPREQUEUED, /* TCPPrequeued */ - LINUX_MIB_TCPDIRECTCOPYFROMBACKLOG, /* TCPDirectCopyFromBacklog */ - LINUX_MIB_TCPDIRECTCOPYFROMPREQUEUE, /* TCPDirectCopyFromPrequeue */ - LINUX_MIB_TCPPREQUEUEDROPPED, /* TCPPrequeueDropped */ LINUX_MIB_TCPHPHITS, /* TCPHPHits */ - LINUX_MIB_TCPHPHITSTOUSER, /* TCPHPHitsToUser */ LINUX_MIB_TCPPUREACKS, /* TCPPureAcks */ LINUX_MIB_TCPHPACKS, /* TCPHPAcks */ LINUX_MIB_TCPRENORECOVERY, /* TCPRenoRecovery */ @@ -208,14 +203,12 @@ enum LINUX_MIB_TCPSACKFAILURES, /* TCPSackFailures */ LINUX_MIB_TCPLOSSFAILURES, /* TCPLossFailures */ LINUX_MIB_TCPFASTRETRANS, /* TCPFastRetrans */ - LINUX_MIB_TCPFORWARDRETRANS, /* TCPForwardRetrans */ LINUX_MIB_TCPSLOWSTARTRETRANS, /* TCPSlowStartRetrans */ LINUX_MIB_TCPTIMEOUTS, /* TCPTimeouts */ LINUX_MIB_TCPLOSSPROBES, /* TCPLossProbes */ LINUX_MIB_TCPLOSSPROBERECOVERY, /* TCPLossProbeRecovery */ LINUX_MIB_TCPRENORECOVERYFAIL, /* TCPRenoRecoveryFail */ LINUX_MIB_TCPSACKRECOVERYFAIL, /* TCPSackRecoveryFail */ - LINUX_MIB_TCPSCHEDULERFAILED, /* TCPSchedulerFailed */ LINUX_MIB_TCPRCVCOLLAPSED, /* TCPRcvCollapsed */ LINUX_MIB_TCPDSACKOLDSENT, /* TCPDSACKOldSent */ LINUX_MIB_TCPDSACKOFOSENT, /* TCPDSACKOfoSent */ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index a5507c977497..15c25eccab2b 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -231,6 +231,14 @@ enum { TCP_NLA_SNDBUF_LIMITED, /* Time (usec) limited by send buffer */ TCP_NLA_DATA_SEGS_OUT, /* Data pkts sent including retransmission */ TCP_NLA_TOTAL_RETRANS, /* Data pkts retransmitted */ + TCP_NLA_PACING_RATE, /* Pacing rate in bytes per second */ + TCP_NLA_DELIVERY_RATE, /* Delivery rate in bytes per second */ + TCP_NLA_SND_CWND, /* Sending congestion window */ + TCP_NLA_REORDERING, /* Reordering metric */ + TCP_NLA_MIN_RTT, /* minimum RTT */ + TCP_NLA_RECUR_RETRANS, /* Recurring retransmits for the current pkt */ + TCP_NLA_DELIVERY_RATE_APP_LMT, /* delivery rate application limited ? */ + }; /* for TCP_MD5SIG socket option */ @@ -248,4 +256,13 @@ struct tcp_md5sig { __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; /* key (binary) */ }; +/* INET_DIAG_MD5SIG */ +struct tcp_diag_md5sig { + __u8 tcpm_family; + __u8 tcpm_prefixlen; + __u16 tcpm_keylen; + __be32 tcpm_addr[4]; + __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; +}; + #endif /* _UAPI_LINUX_TCP_H */ diff --git a/include/uapi/linux/usb/charger.h b/include/uapi/linux/usb/charger.h new file mode 100644 index 000000000000..5f72af35b3ed --- /dev/null +++ b/include/uapi/linux/usb/charger.h @@ -0,0 +1,31 @@ +/* + * This file defines the USB charger type and state that are needed for + * USB device APIs. + */ + +#ifndef _UAPI__LINUX_USB_CHARGER_H +#define _UAPI__LINUX_USB_CHARGER_H + +/* + * USB charger type: + * SDP (Standard Downstream Port) + * DCP (Dedicated Charging Port) + * CDP (Charging Downstream Port) + * ACA (Accessory Charger Adapters) + */ +enum usb_charger_type { + UNKNOWN_TYPE, + SDP_TYPE, + DCP_TYPE, + CDP_TYPE, + ACA_TYPE, +}; + +/* USB charger state */ +enum usb_charger_state { + USB_CHARGER_DEFAULT, + USB_CHARGER_PRESENT, + USB_CHARGER_ABSENT, +}; + +#endif /* _UAPI__LINUX_USB_CHARGER_H */ diff --git a/include/uapi/linux/userfaultfd.h b/include/uapi/linux/userfaultfd.h index 3b059530dac9..d6d1f65cb3c3 100644 --- a/include/uapi/linux/userfaultfd.h +++ b/include/uapi/linux/userfaultfd.h @@ -23,7 +23,9 @@ UFFD_FEATURE_EVENT_REMOVE | \ UFFD_FEATURE_EVENT_UNMAP | \ UFFD_FEATURE_MISSING_HUGETLBFS | \ - UFFD_FEATURE_MISSING_SHMEM) + UFFD_FEATURE_MISSING_SHMEM | \ + UFFD_FEATURE_SIGBUS | \ + UFFD_FEATURE_THREAD_ID) #define UFFD_API_IOCTLS \ ((__u64)1 << _UFFDIO_REGISTER | \ (__u64)1 << _UFFDIO_UNREGISTER | \ @@ -78,6 +80,9 @@ struct uffd_msg { struct { __u64 flags; __u64 address; + union { + __u32 ptid; + } feat; } pagefault; struct { @@ -153,6 +158,13 @@ struct uffdio_api { * UFFD_FEATURE_MISSING_SHMEM works the same as * UFFD_FEATURE_MISSING_HUGETLBFS, but it applies to shmem * (i.e. tmpfs and other shmem based APIs). + * + * UFFD_FEATURE_SIGBUS feature means no page-fault + * (UFFD_EVENT_PAGEFAULT) event will be delivered, instead + * a SIGBUS signal will be sent to the faulting process. + * + * UFFD_FEATURE_THREAD_ID pid of the page faulted task_struct will + * be returned, if feature is not requested 0 will be returned. */ #define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0) #define UFFD_FEATURE_EVENT_FORK (1<<1) @@ -161,6 +173,8 @@ struct uffdio_api { #define UFFD_FEATURE_MISSING_HUGETLBFS (1<<4) #define UFFD_FEATURE_MISSING_SHMEM (1<<5) #define UFFD_FEATURE_EVENT_UNMAP (1<<6) +#define UFFD_FEATURE_SIGBUS (1<<7) +#define UFFD_FEATURE_THREAD_ID (1<<8) __u64 features; __u64 ioctls; diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 45cf7359822c..185d6a0acc06 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -603,6 +603,11 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */ #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */ #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ + /* 12bit raw bayer packed, 6 bytes for every 4 pixels */ +#define V4L2_PIX_FMT_SBGGR12P v4l2_fourcc('p', 'B', 'C', 'C') +#define V4L2_PIX_FMT_SGBRG12P v4l2_fourcc('p', 'G', 'C', 'C') +#define V4L2_PIX_FMT_SGRBG12P v4l2_fourcc('p', 'g', 'C', 'C') +#define V4L2_PIX_FMT_SRGGB12P v4l2_fourcc('p', 'R', 'C', 'C') #define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ #define V4L2_PIX_FMT_SGBRG16 v4l2_fourcc('G', 'B', '1', '6') /* 16 GBGB.. RGRG.. */ #define V4L2_PIX_FMT_SGRBG16 v4l2_fourcc('G', 'R', '1', '6') /* 16 GRGR.. BGBG.. */ diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h index c07295969b7e..6d5d5faa989b 100644 --- a/include/uapi/linux/virtio_ring.h +++ b/include/uapi/linux/virtio_ring.h @@ -1,7 +1,7 @@ #ifndef _UAPI_LINUX_VIRTIO_RING_H #define _UAPI_LINUX_VIRTIO_RING_H -/* An interface for efficient virtio implementation, currently for use by KVM - * and lguest, but hopefully others soon. Do NOT change this since it will +/* An interface for efficient virtio implementation, currently for use by KVM, + * but hopefully others soon. Do NOT change this since it will * break existing servers and clients. * * This header is BSD licensed so anyone can use the definitions to implement diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 2b384ff09fa0..5fe7370a2bef 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -304,6 +304,7 @@ enum xfrm_attr_type_t { XFRMA_ADDRESS_FILTER, /* struct xfrm_address_filter */ XFRMA_PAD, XFRMA_OFFLOAD_DEV, /* struct xfrm_state_offload */ + XFRMA_OUTPUT_MARK, /* __u32 */ __XFRMA_MAX #define XFRMA_MAX (__XFRMA_MAX - 1) diff --git a/include/uapi/rdma/ib_user_ioctl_verbs.h b/include/uapi/rdma/ib_user_ioctl_verbs.h new file mode 100644 index 000000000000..842792eae383 --- /dev/null +++ b/include/uapi/rdma/ib_user_ioctl_verbs.h @@ -0,0 +1,84 @@ +/* + * Copyright (c) 2017, Mellanox Technologies inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef IB_USER_IOCTL_VERBS_H +#define IB_USER_IOCTL_VERBS_H + +#include <rdma/rdma_user_ioctl.h> + +#define UVERBS_UDATA_DRIVER_DATA_NS 1 +#define UVERBS_UDATA_DRIVER_DATA_FLAG (1UL << UVERBS_ID_NS_SHIFT) + +enum uverbs_default_objects { + UVERBS_OBJECT_DEVICE, /* No instances of DEVICE are allowed */ + UVERBS_OBJECT_PD, + UVERBS_OBJECT_COMP_CHANNEL, + UVERBS_OBJECT_CQ, + UVERBS_OBJECT_QP, + UVERBS_OBJECT_SRQ, + UVERBS_OBJECT_AH, + UVERBS_OBJECT_MR, + UVERBS_OBJECT_MW, + UVERBS_OBJECT_FLOW, + UVERBS_OBJECT_XRCD, + UVERBS_OBJECT_RWQ_IND_TBL, + UVERBS_OBJECT_WQ, + UVERBS_OBJECT_LAST, +}; + +enum { + UVERBS_UHW_IN = UVERBS_UDATA_DRIVER_DATA_FLAG, + UVERBS_UHW_OUT, +}; + +enum uverbs_create_cq_cmd_attr_ids { + CREATE_CQ_HANDLE, + CREATE_CQ_CQE, + CREATE_CQ_USER_HANDLE, + CREATE_CQ_COMP_CHANNEL, + CREATE_CQ_COMP_VECTOR, + CREATE_CQ_FLAGS, + CREATE_CQ_RESP_CQE, +}; + +enum uverbs_destroy_cq_cmd_attr_ids { + DESTROY_CQ_HANDLE, + DESTROY_CQ_RESP, +}; + +enum uverbs_actions_cq_ops { + UVERBS_CQ_CREATE, + UVERBS_CQ_DESTROY, +}; + +#endif + diff --git a/include/uapi/rdma/ib_user_verbs.h b/include/uapi/rdma/ib_user_verbs.h index 270c350bedc6..9a0b6479fe0c 100644 --- a/include/uapi/rdma/ib_user_verbs.h +++ b/include/uapi/rdma/ib_user_verbs.h @@ -236,6 +236,20 @@ struct ib_uverbs_rss_caps { __u32 reserved; }; +struct ib_uverbs_tm_caps { + /* Max size of rendezvous request message */ + __u32 max_rndv_hdr_size; + /* Max number of entries in tag matching list */ + __u32 max_num_tags; + /* TM flags */ + __u32 flags; + /* Max number of outstanding list operations */ + __u32 max_ops; + /* Max number of SGE in tag matching entry */ + __u32 max_sge; + __u32 reserved; +}; + struct ib_uverbs_ex_query_device_resp { struct ib_uverbs_query_device_resp base; __u32 comp_mask; @@ -247,6 +261,7 @@ struct ib_uverbs_ex_query_device_resp { struct ib_uverbs_rss_caps rss_caps; __u32 max_wq_type_rq; __u32 raw_packet_caps; + struct ib_uverbs_tm_caps xrq_caps; }; struct ib_uverbs_query_port { @@ -578,7 +593,7 @@ struct ib_uverbs_ex_create_qp { __u32 comp_mask; __u32 create_flags; __u32 rwq_ind_tbl_handle; - __u32 reserved1; + __u32 source_qpn; }; struct ib_uverbs_open_qp { @@ -1024,7 +1039,7 @@ struct ib_uverbs_create_xsrq { __u32 max_wr; __u32 max_sge; __u32 srq_limit; - __u32 reserved; + __u32 max_num_tags; __u32 xrcd_handle; __u32 cq_handle; __u64 driver_data[0]; diff --git a/include/uapi/rdma/mlx4-abi.h b/include/uapi/rdma/mlx4-abi.h index af431752655c..c55f60e05f86 100644 --- a/include/uapi/rdma/mlx4-abi.h +++ b/include/uapi/rdma/mlx4-abi.h @@ -95,13 +95,63 @@ struct mlx4_ib_create_srq_resp { __u32 reserved; }; +struct mlx4_ib_create_qp_rss { + __u64 rx_hash_fields_mask; + __u8 rx_hash_function; + __u8 reserved[7]; + __u8 rx_hash_key[40]; + __u32 comp_mask; + __u32 reserved1; +}; + struct mlx4_ib_create_qp { __u64 buf_addr; __u64 db_addr; __u8 log_sq_bb_count; __u8 log_sq_stride; __u8 sq_no_prefetch; - __u8 reserved[5]; + __u8 reserved; + __u32 inl_recv_sz; +}; + +struct mlx4_ib_create_wq { + __u64 buf_addr; + __u64 db_addr; + __u8 log_range_size; + __u8 reserved[3]; + __u32 comp_mask; +}; + +struct mlx4_ib_modify_wq { + __u32 comp_mask; + __u32 reserved; +}; + +struct mlx4_ib_create_rwq_ind_tbl_resp { + __u32 response_length; + __u32 reserved; +}; + +/* RX Hash function flags */ +enum mlx4_ib_rx_hash_function_flags { + MLX4_IB_RX_HASH_FUNC_TOEPLITZ = 1 << 0, +}; + +/* + * RX Hash flags, these flags allows to set which incoming packet's field should + * participates in RX Hash. Each flag represent certain packet's field, + * when the flag is set the field that is represented by the flag will + * participate in RX Hash calculation. + */ +enum mlx4_ib_rx_hash_fields { + MLX4_IB_RX_HASH_SRC_IPV4 = 1 << 0, + MLX4_IB_RX_HASH_DST_IPV4 = 1 << 1, + MLX4_IB_RX_HASH_SRC_IPV6 = 1 << 2, + MLX4_IB_RX_HASH_DST_IPV6 = 1 << 3, + MLX4_IB_RX_HASH_SRC_PORT_TCP = 1 << 4, + MLX4_IB_RX_HASH_DST_PORT_TCP = 1 << 5, + MLX4_IB_RX_HASH_SRC_PORT_UDP = 1 << 6, + MLX4_IB_RX_HASH_DST_PORT_UDP = 1 << 7 }; #endif /* MLX4_ABI_USER_H */ diff --git a/include/uapi/rdma/mlx5-abi.h b/include/uapi/rdma/mlx5-abi.h index 0b3d30837a9f..1791bf123ba9 100644 --- a/include/uapi/rdma/mlx5-abi.h +++ b/include/uapi/rdma/mlx5-abi.h @@ -168,6 +168,28 @@ struct mlx5_packet_pacing_caps { __u32 reserved; }; +enum mlx5_ib_mpw_caps { + MPW_RESERVED = 1 << 0, + MLX5_IB_ALLOW_MPW = 1 << 1, + MLX5_IB_SUPPORT_EMPW = 1 << 2, +}; + +enum mlx5_ib_sw_parsing_offloads { + MLX5_IB_SW_PARSING = 1 << 0, + MLX5_IB_SW_PARSING_CSUM = 1 << 1, + MLX5_IB_SW_PARSING_LSO = 1 << 2, +}; + +struct mlx5_ib_sw_parsing_caps { + __u32 sw_parsing_offloads; /* enum mlx5_ib_sw_parsing_offloads */ + + /* Corresponding bit will be set if qp type from + * 'enum ib_qp_type' is supported, e.g. + * supported_qpts |= 1 << IB_QPT_RAW_PACKET + */ + __u32 supported_qpts; +}; + struct mlx5_ib_query_device_resp { __u32 comp_mask; __u32 response_length; @@ -177,6 +199,7 @@ struct mlx5_ib_query_device_resp { struct mlx5_packet_pacing_caps packet_pacing_caps; __u32 mlx5_ib_support_multi_pkt_send_wqes; __u32 reserved; + struct mlx5_ib_sw_parsing_caps sw_parsing_caps; }; struct mlx5_ib_create_cq { diff --git a/include/uapi/rdma/qedr-abi.h b/include/uapi/rdma/qedr-abi.h index 75c270d839c8..54b64357ab24 100644 --- a/include/uapi/rdma/qedr-abi.h +++ b/include/uapi/rdma/qedr-abi.h @@ -49,6 +49,9 @@ struct qedr_alloc_ucontext_resp { __u32 sges_per_recv_wr; __u32 sges_per_srq_wr; __u32 max_cqes; + __u8 dpm_enabled; + __u8 wids_enabled; + __u16 wid_count; }; struct qedr_alloc_pd_ureq { diff --git a/include/uapi/rdma/rdma_netlink.h b/include/uapi/rdma/rdma_netlink.h index 02fe8390c18f..861440a87e7c 100644 --- a/include/uapi/rdma/rdma_netlink.h +++ b/include/uapi/rdma/rdma_netlink.h @@ -8,7 +8,7 @@ enum { RDMA_NL_IWCM, RDMA_NL_RSVD, RDMA_NL_LS, /* RDMA Local Services */ - RDMA_NL_I40IW, + RDMA_NL_NLDEV, /* RDMA device interface */ RDMA_NL_NUM_CLIENTS }; @@ -222,4 +222,86 @@ struct rdma_nla_ls_gid { __u8 gid[16]; }; +enum rdma_nldev_command { + RDMA_NLDEV_CMD_UNSPEC, + + RDMA_NLDEV_CMD_GET, /* can dump */ + RDMA_NLDEV_CMD_SET, + RDMA_NLDEV_CMD_NEW, + RDMA_NLDEV_CMD_DEL, + + RDMA_NLDEV_CMD_PORT_GET, /* can dump */ + RDMA_NLDEV_CMD_PORT_SET, + RDMA_NLDEV_CMD_PORT_NEW, + RDMA_NLDEV_CMD_PORT_DEL, + + RDMA_NLDEV_NUM_OPS +}; + +enum rdma_nldev_attr { + /* don't change the order or add anything between, this is ABI! */ + RDMA_NLDEV_ATTR_UNSPEC, + + /* Identifier for ib_device */ + RDMA_NLDEV_ATTR_DEV_INDEX, /* u32 */ + + RDMA_NLDEV_ATTR_DEV_NAME, /* string */ + /* + * Device index together with port index are identifiers + * for port/link properties. + * + * For RDMA_NLDEV_CMD_GET commamnd, port index will return number + * of available ports in ib_device, while for port specific operations, + * it will be real port index as it appears in sysfs. Port index follows + * sysfs notation and starts from 1 for the first port. + */ + RDMA_NLDEV_ATTR_PORT_INDEX, /* u32 */ + + /* + * Device and port capabilities + */ + RDMA_NLDEV_ATTR_CAP_FLAGS, /* u64 */ + + /* + * FW version + */ + RDMA_NLDEV_ATTR_FW_VERSION, /* string */ + + /* + * Node GUID (in host byte order) associated with the RDMA device. + */ + RDMA_NLDEV_ATTR_NODE_GUID, /* u64 */ + + /* + * System image GUID (in host byte order) associated with + * this RDMA device and other devices which are part of a + * single system. + */ + RDMA_NLDEV_ATTR_SYS_IMAGE_GUID, /* u64 */ + + /* + * Subnet prefix (in host byte order) + */ + RDMA_NLDEV_ATTR_SUBNET_PREFIX, /* u64 */ + + /* + * Local Identifier (LID), + * According to IB specification, It is 16-bit address assigned + * by the Subnet Manager. Extended to be 32-bit for OmniPath users. + */ + RDMA_NLDEV_ATTR_LID, /* u32 */ + RDMA_NLDEV_ATTR_SM_LID, /* u32 */ + + /* + * LID mask control (LMC) + */ + RDMA_NLDEV_ATTR_LMC, /* u8 */ + + RDMA_NLDEV_ATTR_PORT_STATE, /* u8 */ + RDMA_NLDEV_ATTR_PORT_PHYS_STATE, /* u8 */ + + RDMA_NLDEV_ATTR_DEV_NODE_TYPE, /* u8 */ + + RDMA_NLDEV_ATTR_MAX +}; #endif /* _UAPI_RDMA_NETLINK_H */ diff --git a/include/uapi/rdma/rdma_user_ioctl.h b/include/uapi/rdma/rdma_user_ioctl.h index 9388125ad51b..165a27e969d5 100644 --- a/include/uapi/rdma/rdma_user_ioctl.h +++ b/include/uapi/rdma/rdma_user_ioctl.h @@ -43,6 +43,39 @@ /* Legacy name, for user space application which already use it */ #define IB_IOCTL_MAGIC RDMA_IOCTL_MAGIC +#define RDMA_VERBS_IOCTL \ + _IOWR(RDMA_IOCTL_MAGIC, 1, struct ib_uverbs_ioctl_hdr) + +#define UVERBS_ID_NS_MASK 0xF000 +#define UVERBS_ID_NS_SHIFT 12 + +enum { + /* User input */ + UVERBS_ATTR_F_MANDATORY = 1U << 0, + /* + * Valid output bit should be ignored and considered set in + * mandatory fields. This bit is kernel output. + */ + UVERBS_ATTR_F_VALID_OUTPUT = 1U << 1, +}; + +struct ib_uverbs_attr { + __u16 attr_id; /* command specific type attribute */ + __u16 len; /* only for pointers */ + __u16 flags; /* combination of UVERBS_ATTR_F_XXXX */ + __u16 reserved; + __u64 data; /* ptr to command, inline data or idr/fd */ +}; + +struct ib_uverbs_ioctl_hdr { + __u16 length; + __u16 object_id; + __u16 method_id; + __u16 num_attrs; + __u64 reserved; + struct ib_uverbs_attr attrs[0]; +}; + /* * General blocks assignments * It is closed on purpose do not expose it it user space diff --git a/include/uapi/rdma/vmw_pvrdma-abi.h b/include/uapi/rdma/vmw_pvrdma-abi.h index c8c1d2d6df4d..c6569b0032ec 100644 --- a/include/uapi/rdma/vmw_pvrdma-abi.h +++ b/include/uapi/rdma/vmw_pvrdma-abi.h @@ -125,7 +125,8 @@ enum pvrdma_wc_flags { PVRDMA_WC_IP_CSUM_OK = 1 << 3, PVRDMA_WC_WITH_SMAC = 1 << 4, PVRDMA_WC_WITH_VLAN = 1 << 5, - PVRDMA_WC_FLAGS_MAX = PVRDMA_WC_WITH_VLAN, + PVRDMA_WC_WITH_NETWORK_HDR_TYPE = 1 << 6, + PVRDMA_WC_FLAGS_MAX = PVRDMA_WC_WITH_NETWORK_HDR_TYPE, }; struct pvrdma_alloc_ucontext_resp { @@ -283,7 +284,8 @@ struct pvrdma_cqe { __u8 dlid_path_bits; __u8 port_num; __u8 smac[6]; - __u8 reserved2[7]; /* Pad to next power of 2 (64). */ + __u8 network_hdr_type; + __u8 reserved2[6]; /* Pad to next power of 2 (64). */ }; #endif /* __VMW_PVRDMA_ABI_H__ */ diff --git a/include/uapi/sound/snd_sst_tokens.h b/include/uapi/sound/snd_sst_tokens.h index dedb2056160d..f691e421f5e8 100644 --- a/include/uapi/sound/snd_sst_tokens.h +++ b/include/uapi/sound/snd_sst_tokens.h @@ -163,8 +163,71 @@ * * %SKL_TKN_U32_DMA_BUF_SIZE: DMA buffer size in millisec * + * %SKL_TKN_U32_PIPE_DIR: Specifies pipe direction. Can be + * playback/capture. + * + * %SKL_TKN_U32_NUM_CONFIGS: Number of pipe configs + * + * %SKL_TKN_U32_PATH_MEM_PGS: Size of memory (in pages) required for pipeline + * and its data + * + * %SKL_TKN_U32_PIPE_CONFIG_ID: Config id for the modules in the pipe + * and PCM params supported by that pipe + * config. This is used as index to fill + * up the pipe config and module config + * structure. + * + * %SKL_TKN_U32_CFG_FREQ: + * %SKL_TKN_U8_CFG_CHAN: + * %SKL_TKN_U8_CFG_BPS: PCM params (freq, channels, bits per sample) + * supported for each of the pipe configs. + * + * %SKL_TKN_CFG_MOD_RES_ID: Module's resource index for each of the + * pipe config + * + * %SKL_TKN_CFG_MOD_FMT_ID: Module's interface index for each of the + * pipe config + * + * %SKL_TKN_U8_NUM_MOD: Number of modules in the manifest + * + * %SKL_TKN_MM_U8_MOD_IDX: Current index of the module in the manifest + * + * %SKL_TKN_MM_U8_NUM_RES: Number of resources for the module + * + * %SKL_TKN_MM_U8_NUM_INTF: Number of interfaces for the module + * + * %SKL_TKN_MM_U32_RES_ID: Resource index for the resource info to + * be filled into. + * A module can support multiple resource + * configuration and is represnted as a + * resource table. This index is used to + * fill information into appropriate index. + * + * %SKL_TKN_MM_U32_CPS: DSP cycles per second + * + * %SKL_TKN_MM_U32_DMA_SIZE: Allocated buffer size for gateway DMA + * + * %SKL_TKN_MM_U32_CPC: DSP cycles allocated per frame + * + * %SKL_TKN_MM_U32_RES_PIN_ID: Resource pin index in the module + * + * %SKL_TKN_MM_U32_INTF_PIN_ID: Interface index in the module + * + * %SKL_TKN_MM_U32_PIN_BUF: Buffer size of the module pin + * + * %SKL_TKN_MM_U32_FMT_ID: Format index for each of the interface/ + * format information to be filled into. + * + * %SKL_TKN_MM_U32_NUM_IN_FMT: Number of input formats + * %SKL_TKN_MM_U32_NUM_OUT_FMT: Number of output formats + * * module_id and loadable flags dont have tokens as these values will be * read from the DSP FW manifest + * + * Tokens defined can be used either in the manifest or widget private data. + * + * SKL_TKN_MM is used as a suffix for all tokens that represent + * module data in the manifest. */ enum SKL_TKNS { SKL_TKN_UUID = 1, @@ -218,7 +281,34 @@ enum SKL_TKNS { SKL_TKL_U32_D0I3_CAPS, /* Typo added at v4.10 */ SKL_TKN_U32_D0I3_CAPS = SKL_TKL_U32_D0I3_CAPS, SKL_TKN_U32_DMA_BUF_SIZE, - SKL_TKN_MAX = SKL_TKN_U32_DMA_BUF_SIZE, + + SKL_TKN_U32_PIPE_DIRECTION, + SKL_TKN_U32_PIPE_CONFIG_ID, + SKL_TKN_U32_NUM_CONFIGS, + SKL_TKN_U32_PATH_MEM_PGS, + + SKL_TKN_U32_CFG_FREQ, + SKL_TKN_U8_CFG_CHAN, + SKL_TKN_U8_CFG_BPS, + SKL_TKN_CFG_MOD_RES_ID, + SKL_TKN_CFG_MOD_FMT_ID, + SKL_TKN_U8_NUM_MOD, + + SKL_TKN_MM_U8_MOD_IDX, + SKL_TKN_MM_U8_NUM_RES, + SKL_TKN_MM_U8_NUM_INTF, + SKL_TKN_MM_U32_RES_ID, + SKL_TKN_MM_U32_CPS, + SKL_TKN_MM_U32_DMA_SIZE, + SKL_TKN_MM_U32_CPC, + SKL_TKN_MM_U32_RES_PIN_ID, + SKL_TKN_MM_U32_INTF_PIN_ID, + SKL_TKN_MM_U32_PIN_BUF, + SKL_TKN_MM_U32_FMT_ID, + SKL_TKN_MM_U32_NUM_IN_FMT, + SKL_TKN_MM_U32_NUM_OUT_FMT, + + SKL_TKN_MAX = SKL_TKN_MM_U32_NUM_OUT_FMT, }; #endif |