diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 44 |
1 files changed, 36 insertions, 8 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ab21299c8f4d..a2ddcf2398fd 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -4,6 +4,7 @@ * 802.11 device and configuration interface * * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> + * Copyright 2013-2014 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -663,6 +664,7 @@ struct cfg80211_acl_data { * @crypto: crypto settings * @privacy: the BSS uses privacy * @auth_type: Authentication type (algorithm) + * @smps_mode: SMPS mode * @inactivity_timeout: time in seconds to determine station's inactivity. * @p2p_ctwindow: P2P CT Window * @p2p_opp_ps: P2P opportunistic PS @@ -681,6 +683,7 @@ struct cfg80211_ap_settings { struct cfg80211_crypto_settings crypto; bool privacy; enum nl80211_auth_type auth_type; + enum nl80211_smps_mode smps_mode; int inactivity_timeout; u8 p2p_ctwindow; bool p2p_opp_ps; @@ -1607,10 +1610,12 @@ struct cfg80211_auth_request { * * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) * @ASSOC_REQ_DISABLE_VHT: Disable VHT + * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association */ enum cfg80211_assoc_req_flags { ASSOC_REQ_DISABLE_HT = BIT(0), ASSOC_REQ_DISABLE_VHT = BIT(1), + ASSOC_REQ_USE_RRM = BIT(2), }; /** @@ -1802,6 +1807,7 @@ struct cfg80211_connect_params { * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed + * @WIPHY_PARAM_DYN_ACK: dynack has been enabled */ enum wiphy_params_flags { WIPHY_PARAM_RETRY_SHORT = 1 << 0, @@ -1809,6 +1815,7 @@ enum wiphy_params_flags { WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, WIPHY_PARAM_COVERAGE_CLASS = 1 << 4, + WIPHY_PARAM_DYN_ACK = 1 << 5, }; /* @@ -1975,14 +1982,12 @@ struct cfg80211_wowlan_wakeup { /** * struct cfg80211_gtk_rekey_data - rekey data - * @kek: key encryption key - * @kck: key confirmation key - * @replay_ctr: replay counter + * @kek: key encryption key (NL80211_KEK_LEN bytes) + * @kck: key confirmation key (NL80211_KCK_LEN bytes) + * @replay_ctr: replay counter (NL80211_REPLAY_CTR_LEN bytes) */ struct cfg80211_gtk_rekey_data { - u8 kek[NL80211_KEK_LEN]; - u8 kck[NL80211_KCK_LEN]; - u8 replay_ctr[NL80211_REPLAY_CTR_LEN]; + const u8 *kek, *kck, *replay_ctr; }; /** @@ -2315,6 +2320,17 @@ struct cfg80211_qos_map { * @set_ap_chanwidth: Set the AP (including P2P GO) mode channel width for the * given interface This is used e.g. for dynamic HT 20/40 MHz channel width * changes during the lifetime of the BSS. + * + * @add_tx_ts: validate (if admitted_time is 0) or add a TX TS to the device + * with the given parameters; action frame exchange has been handled by + * userspace so this just has to modify the TX path to take the TS into + * account. + * If the admitted time is 0 just validate the parameters to make sure + * the session can be created at all; it is valid to just always return + * success for that but that may result in inefficient behaviour (handshake + * with the peer followed by immediate teardown when the addition is later + * rejected) + * @del_tx_ts: remove an existing TX TS */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2555,6 +2571,12 @@ struct cfg80211_ops { int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_chan_def *chandef); + + int (*add_tx_ts)(struct wiphy *wiphy, struct net_device *dev, + u8 tsid, const u8 *peer, u8 user_prio, + u16 admitted_time); + int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev, + u8 tsid, const u8 *peer); }; /* @@ -2601,9 +2623,13 @@ struct cfg80211_ops { * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in * beaconing mode (AP, IBSS, Mesh, ...). + * @WIPHY_FLAG_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM + * TSPEC sessions (TID aka TSID 0-7) with the NL80211_CMD_ADD_TX_TS + * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it + * needs to be able to handle Block-Ack agreements and other things. */ enum wiphy_flags { - /* use hole at 0 */ + WIPHY_FLAG_SUPPORTS_WMM_ADMISSION = BIT(0), /* use hole at 1 */ /* use hole at 2 */ WIPHY_FLAG_NETNS_OK = BIT(3), @@ -3920,6 +3946,7 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); * moves to cfg80211 in this call * @buf: authentication frame (header + body) * @len: length of the frame data + * @uapsd_queues: bitmap of ACs configured to uapsd. -1 if n/a. * * After being asked to associate via cfg80211_ops::assoc() the driver must * call either this function or cfg80211_auth_timeout(). @@ -3928,7 +3955,8 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); */ void cfg80211_rx_assoc_resp(struct net_device *dev, struct cfg80211_bss *bss, - const u8 *buf, size_t len); + const u8 *buf, size_t len, + int uapsd_queues); /** * cfg80211_assoc_timeout - notification of timed out association |