diff options
Diffstat (limited to 'include/asm-x86/uaccess_32.h')
| -rw-r--r-- | include/asm-x86/uaccess_32.h | 422 |
1 files changed, 0 insertions, 422 deletions
diff --git a/include/asm-x86/uaccess_32.h b/include/asm-x86/uaccess_32.h index 8e7595c1f34e..6fdef39a0bcb 100644 --- a/include/asm-x86/uaccess_32.h +++ b/include/asm-x86/uaccess_32.h @@ -11,426 +11,6 @@ #include <asm/asm.h> #include <asm/page.h> -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -/* - * movsl can be slow when source and dest are not both 8-byte aligned - */ -#ifdef CONFIG_X86_INTEL_USERCOPY -extern struct movsl_mask { - int mask; -} ____cacheline_aligned_in_smp movsl_mask; -#endif - -#define __addr_ok(addr) \ - ((unsigned long __force)(addr) < \ - (current_thread_info()->addr_limit.seg)) - -/* - * Test whether a block of memory is a valid user space address. - * Returns 0 if the range is valid, nonzero otherwise. - * - * This is equivalent to the following test: - * (u33)addr + (u33)size >= (u33)current->addr_limit.seg - * - * This needs 33-bit arithmetic. We have a carry... - */ -#define __range_ok(addr, size) \ -({ \ - unsigned long flag, roksum; \ - __chk_user_ptr(addr); \ - asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \ - :"=&r" (flag), "=r" (roksum) \ - :"1" (addr), "g" ((int)(size)), \ - "rm" (current_thread_info()->addr_limit.seg)); \ - flag; \ -}) - -/** - * access_ok: - Checks if a user space pointer is valid - * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that - * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe - * to write to a block, it is always safe to read from it. - * @addr: User space pointer to start of block to check - * @size: Size of block to check - * - * Context: User context only. This function may sleep. - * - * Checks if a pointer to a block of memory in user space is valid. - * - * Returns true (nonzero) if the memory block may be valid, false (zero) - * if it is definitely invalid. - * - * Note that, depending on architecture, this function probably just - * checks that the pointer is in the user space range - after calling - * this function, memory access functions may still return -EFAULT. - */ -#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0)) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry { - unsigned long insn, fixup; -}; - -extern int fixup_exception(struct pt_regs *regs); - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - */ - -extern void __get_user_1(void); -extern void __get_user_2(void); -extern void __get_user_4(void); - -#define __get_user_x(size, ret, x, ptr) \ - asm volatile("call __get_user_" #size \ - :"=a" (ret),"=d" (x) \ - :"0" (ptr)) - - -/* Careful: we have to cast the result to the type of the pointer - * for sign reasons */ - -/** - * get_user: - Get a simple variable from user space. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define get_user(x, ptr) \ -({ \ - int __ret_gu; \ - unsigned long __val_gu; \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: \ - __get_user_x(1, __ret_gu, __val_gu, ptr); \ - break; \ - case 2: \ - __get_user_x(2, __ret_gu, __val_gu, ptr); \ - break; \ - case 4: \ - __get_user_x(4, __ret_gu, __val_gu, ptr); \ - break; \ - default: \ - __get_user_x(X, __ret_gu, __val_gu, ptr); \ - break; \ - } \ - (x) = (__typeof__(*(ptr)))__val_gu; \ - __ret_gu; \ -}) - -extern void __put_user_bad(void); - -/* - * Strange magic calling convention: pointer in %ecx, - * value in %eax(:%edx), return value in %eax, no clobbers. - */ -extern void __put_user_1(void); -extern void __put_user_2(void); -extern void __put_user_4(void); -extern void __put_user_8(void); - -#define __put_user_1(x, ptr) \ - asm volatile("call __put_user_1" : "=a" (__ret_pu) \ - : "0" ((typeof(*(ptr)))(x)), "c" (ptr)) - -#define __put_user_2(x, ptr) \ - asm volatile("call __put_user_2" : "=a" (__ret_pu) \ - : "0" ((typeof(*(ptr)))(x)), "c" (ptr)) - -#define __put_user_4(x, ptr) \ - asm volatile("call __put_user_4" : "=a" (__ret_pu) \ - : "0" ((typeof(*(ptr)))(x)), "c" (ptr)) - -#define __put_user_8(x, ptr) \ - asm volatile("call __put_user_8" : "=a" (__ret_pu) \ - : "A" ((typeof(*(ptr)))(x)), "c" (ptr)) - -#define __put_user_X(x, ptr) \ - asm volatile("call __put_user_X" : "=a" (__ret_pu) \ - : "c" (ptr)) - -/** - * put_user: - Write a simple value into user space. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Returns zero on success, or -EFAULT on error. - */ -#ifdef CONFIG_X86_WP_WORKS_OK - -#define put_user(x, ptr) \ -({ \ - int __ret_pu; \ - __typeof__(*(ptr)) __pu_val; \ - __chk_user_ptr(ptr); \ - __pu_val = x; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - __put_user_1(__pu_val, ptr); \ - break; \ - case 2: \ - __put_user_2(__pu_val, ptr); \ - break; \ - case 4: \ - __put_user_4(__pu_val, ptr); \ - break; \ - case 8: \ - __put_user_8(__pu_val, ptr); \ - break; \ - default: \ - __put_user_X(__pu_val, ptr); \ - break; \ - } \ - __ret_pu; \ -}) - -#else -#define put_user(x, ptr) \ -({ \ - int __ret_pu; \ - __typeof__(*(ptr))__pus_tmp = x; \ - __ret_pu = 0; \ - if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \ - sizeof(*(ptr))) != 0)) \ - __ret_pu = -EFAULT; \ - __ret_pu; \ -}) - - -#endif - -/** - * __get_user: - Get a simple variable from user space, with less checking. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define __get_user(x, ptr) \ - __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - - -/** - * __put_user: - Write a simple value into user space, with less checking. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - */ -#define __put_user(x, ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - long __pu_err; \ - __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \ - __pu_err; \ -}) - - -#define __put_user_u64(x, addr, err) \ - asm volatile("1: movl %%eax,0(%2)\n" \ - "2: movl %%edx,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: movl %3,%0\n" \ - " jmp 3b\n" \ - ".previous\n" \ - _ASM_EXTABLE(1b, 4b) \ - _ASM_EXTABLE(2b, 4b) \ - : "=r" (err) \ - : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err)) - -#ifdef CONFIG_X86_WP_WORKS_OK - -#define __put_user_size(x, ptr, size, retval, errret) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: \ - __put_user_asm(x, ptr, retval, "b", "b", "iq", errret); \ - break; \ - case 2: \ - __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \ - break; \ - case 4: \ - __put_user_asm(x, ptr, retval, "l", "", "ir", errret); \ - break; \ - case 8: \ - __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \ - break; \ - default: \ - __put_user_bad(); \ - } \ -} while (0) - -#else - -#define __put_user_size(x, ptr, size, retval, errret) \ -do { \ - __typeof__(*(ptr))__pus_tmp = x; \ - retval = 0; \ - \ - if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \ - retval = errret; \ -} while (0) - -#endif -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct __user *)(x)) - -/* - * Tell gcc we read from memory instead of writing: this is because - * we do not write to any memory gcc knows about, so there are no - * aliasing issues. - */ -#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \ - asm volatile("1: mov"itype" %"rtype"1,%2\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: movl %3,%0\n" \ - " jmp 2b\n" \ - ".previous\n" \ - _ASM_EXTABLE(1b, 3b) \ - : "=r"(err) \ - : ltype (x), "m" (__m(addr)), "i" (errret), "0" (err)) - - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - __get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -#define __get_user_size(x, ptr, size, retval, errret) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "b", "b", "=q", errret); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "w", "w", "=r", errret); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "l", "", "=r", errret); \ - break; \ - default: \ - (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \ - asm volatile("1: mov"itype" %2,%"rtype"1\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: movl %3,%0\n" \ - " xor"itype" %"rtype"1,%"rtype"1\n" \ - " jmp 2b\n" \ - ".previous\n" \ - _ASM_EXTABLE(1b, 3b) \ - : "=r" (err), ltype (x) \ - : "m" (__m(addr)), "i" (errret), "0" (err)) - - unsigned long __must_check __copy_to_user_ll (void __user *to, const void *from, unsigned long n); unsigned long __must_check __copy_from_user_ll @@ -576,8 +156,6 @@ __copy_from_user(void *to, const void __user *from, unsigned long n) return __copy_from_user_ll(to, from, n); } -#define ARCH_HAS_NOCACHE_UACCESS - static __always_inline unsigned long __copy_from_user_nocache(void *to, const void __user *from, unsigned long n) { |