summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/Kconfig16
-rw-r--r--drivers/acpi/Makefile2
-rw-r--r--drivers/acpi/ac.c1
-rw-r--r--drivers/acpi/acpi_lpss.c2
-rw-r--r--drivers/acpi/acpi_processor.c1
-rw-r--r--drivers/acpi/acpica/Makefile1
-rw-r--r--drivers/acpi/acpica/achware.h4
-rw-r--r--drivers/acpi/acpica/acinterp.h6
-rw-r--r--drivers/acpi/acpica/acutils.h33
-rw-r--r--drivers/acpi/acpica/dbconvert.c5
-rw-r--r--drivers/acpi/acpica/dswexec.c2
-rw-r--r--drivers/acpi/acpica/evgpe.c6
-rw-r--r--drivers/acpi/acpica/exconcat.c2
-rw-r--r--drivers/acpi/acpica/exconvrt.c30
-rw-r--r--drivers/acpi/acpica/exmisc.c2
-rw-r--r--drivers/acpi/acpica/exresop.c2
-rw-r--r--drivers/acpi/acpica/hwgpe.c4
-rw-r--r--drivers/acpi/acpica/hwregs.c72
-rw-r--r--drivers/acpi/acpica/hwtimer.c10
-rw-r--r--drivers/acpi/acpica/hwxface.c118
-rw-r--r--drivers/acpi/acpica/nsconvert.c4
-rw-r--r--drivers/acpi/acpica/tbxface.c9
-rw-r--r--drivers/acpi/acpica/utstrsuppt.c438
-rw-r--r--drivers/acpi/acpica/utstrtoul64.c442
-rw-r--r--drivers/acpi/apei/erst.c2
-rw-r--r--drivers/acpi/apei/ghes.c117
-rw-r--r--drivers/acpi/cppc_acpi.c240
-rw-r--r--drivers/acpi/dock.c1
-rw-r--r--drivers/acpi/ec.c12
-rw-r--r--drivers/acpi/pmic/tps68470_pmic.c455
-rw-r--r--drivers/acpi/resource.c1
-rw-r--r--drivers/acpi/sysfs.c3
-rw-r--r--drivers/acpi/x86/utils.c18
-rw-r--r--drivers/mailbox/pcc.c1
34 files changed, 1464 insertions, 598 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 5b1938f4b626..c9781175e59e 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -536,4 +536,20 @@ if ARM64
source "drivers/acpi/arm64/Kconfig"
endif
+config TPS68470_PMIC_OPREGION
+ bool "ACPI operation region support for TPS68470 PMIC"
+ depends on MFD_TPS68470
+ help
+ This config adds ACPI operation region support for TI TPS68470 PMIC.
+ TPS68470 device is an advanced power management unit that powers
+ a Compact Camera Module (CCM), generates clocks for image sensors,
+ drives a dual LED for flash and incorporates two LED drivers for
+ general purpose indicators.
+ This driver enables ACPI operation region support control voltage
+ regulators and clocks.
+
+ This option is a bool as it provides an ACPI operation
+ region, which must be available before any of the devices
+ using this, are probed.
+
endif # ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index cd1abc9bc325..709c1120f315 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -108,6 +108,8 @@ obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o
obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o
+obj-$(CONFIG_TPS68470_PMIC_OPREGION) += pmic/tps68470_pmic.o
+
video-objs += acpi_video.o video_detect.o
obj-y += dptf/
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 8f52483219ba..47a7ed557bd6 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -265,6 +265,7 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event)
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
+ /* fall through */
case ACPI_AC_NOTIFY_STATUS:
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 032ae44710e5..6633bc8e5846 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -362,7 +362,7 @@ static int register_device_clock(struct acpi_device *adev,
{
const struct lpss_device_desc *dev_desc = pdata->dev_desc;
const char *devname = dev_name(&adev->dev);
- struct clk *clk = ERR_PTR(-ENODEV);
+ struct clk *clk;
struct lpss_clk_data *clk_data;
const char *parent, *clk_name;
void __iomem *prv_base;
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 86c10599d9f8..449d86d39965 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -82,6 +82,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev)
* PIIX4 models.
*/
errata.piix4.throttle = 1;
+ /* fall through*/
case 2: /* PIIX4E */
case 3: /* PIIX4M */
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index e05232da0588..71f6f2624deb 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -178,6 +178,7 @@ acpi-y += \
utresrc.o \
utstate.o \
utstring.o \
+ utstrsuppt.o \
utstrtoul64.o \
utxface.o \
utxfinit.o \
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index fd4f3cacb356..cd722d8edacb 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -66,9 +66,9 @@ acpi_status
acpi_hw_validate_register(struct acpi_generic_address *reg,
u8 max_bit_width, u64 *address);
-acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg);
+acpi_status acpi_hw_read(u64 *value, struct acpi_generic_address *reg);
-acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg);
+acpi_status acpi_hw_write(u64 value, struct acpi_generic_address *reg);
struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id);
diff --git a/drivers/acpi/acpica/acinterp.h b/drivers/acpi/acpica/acinterp.h
index 29a863c85318..29555c8789a3 100644
--- a/drivers/acpi/acpica/acinterp.h
+++ b/drivers/acpi/acpica/acinterp.h
@@ -101,7 +101,8 @@ typedef const struct acpi_exdump_info {
*/
acpi_status
acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc,
- union acpi_operand_object **result_desc, u32 flags);
+ union acpi_operand_object **result_desc,
+ u32 implicit_conversion);
acpi_status
acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc,
@@ -424,9 +425,6 @@ acpi_ex_store_object_to_node(union acpi_operand_object *source_desc,
struct acpi_walk_state *walk_state,
u8 implicit_conversion);
-#define ACPI_IMPLICIT_CONVERSION TRUE
-#define ACPI_NO_IMPLICIT_CONVERSION FALSE
-
/*
* exstoren - resolve/store object
*/
diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h
index 745134ade35f..83b75e9db7ef 100644
--- a/drivers/acpi/acpica/acutils.h
+++ b/drivers/acpi/acpica/acutils.h
@@ -141,6 +141,11 @@ extern const char *acpi_gbl_ptyp_decode[];
#define ACPI_MSG_SUFFIX \
acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number)
+/* Flags to indicate implicit or explicit string-to-integer conversion */
+
+#define ACPI_IMPLICIT_CONVERSION TRUE
+#define ACPI_NO_IMPLICIT_CONVERSION FALSE
+
/* Types for Resource descriptor entries */
#define ACPI_INVALID_RESOURCE 0
@@ -197,15 +202,31 @@ void acpi_ut_strlwr(char *src_string);
int acpi_ut_stricmp(char *string1, char *string2);
-acpi_status acpi_ut_strtoul64(char *string, u32 flags, u64 *ret_integer);
+/*
+ * utstrsuppt - string-to-integer conversion support functions
+ */
+acpi_status acpi_ut_convert_octal_string(char *string, u64 *return_value);
+
+acpi_status acpi_ut_convert_decimal_string(char *string, u64 *return_value_ptr);
+
+acpi_status acpi_ut_convert_hex_string(char *string, u64 *return_value_ptr);
+
+char acpi_ut_remove_whitespace(char **string);
+
+char acpi_ut_remove_leading_zeros(char **string);
+
+u8 acpi_ut_detect_hex_prefix(char **string);
+
+u8 acpi_ut_detect_octal_prefix(char **string);
/*
- * Values for Flags above
- * Note: LIMIT values correspond to acpi_gbl_integer_byte_width values (4/8)
+ * utstrtoul64 - string-to-integer conversion functions
*/
-#define ACPI_STRTOUL_32BIT 0x04 /* 4 bytes */
-#define ACPI_STRTOUL_64BIT 0x08 /* 8 bytes */
-#define ACPI_STRTOUL_BASE16 0x10 /* Default: Base10/16 */
+acpi_status acpi_ut_strtoul64(char *string, u64 *ret_integer);
+
+u64 acpi_ut_explicit_strtoul64(char *string);
+
+u64 acpi_ut_implicit_strtoul64(char *string);
/*
* utglobal - Global data structures and procedures
diff --git a/drivers/acpi/acpica/dbconvert.c b/drivers/acpi/acpica/dbconvert.c
index 857dbc43a9b1..32d546f0db2f 100644
--- a/drivers/acpi/acpica/dbconvert.c
+++ b/drivers/acpi/acpica/dbconvert.c
@@ -277,10 +277,7 @@ acpi_db_convert_to_object(acpi_object_type type,
default:
object->type = ACPI_TYPE_INTEGER;
- status = acpi_ut_strtoul64(string,
- (acpi_gbl_integer_byte_width |
- ACPI_STRTOUL_BASE16),
- &object->integer.value);
+ status = acpi_ut_strtoul64(string, &object->integer.value);
break;
}
diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c
index 20d7744b06ae..22f45d090733 100644
--- a/drivers/acpi/acpica/dswexec.c
+++ b/drivers/acpi/acpica/dswexec.c
@@ -134,7 +134,7 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state,
* object. Implicitly convert the argument if necessary.
*/
status = acpi_ex_convert_to_integer(obj_desc, &local_obj_desc,
- ACPI_STRTOUL_BASE16);
+ ACPI_IMPLICIT_CONVERSION);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 229382035550..263d8fc4a9e2 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -390,8 +390,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list)
struct acpi_gpe_handler_info *gpe_handler_info;
u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
u8 enabled_status_byte;
- u32 status_reg;
- u32 enable_reg;
+ u64 status_reg;
+ u64 enable_reg;
acpi_cpu_flags flags;
u32 i;
u32 j;
@@ -472,7 +472,7 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list)
gpe_register_info->base_gpe_number,
gpe_register_info->base_gpe_number +
(ACPI_GPE_REGISTER_WIDTH - 1),
- status_reg, enable_reg,
+ (u32)status_reg, (u32)enable_reg,
gpe_register_info->enable_for_run,
gpe_register_info->enable_for_wake));
diff --git a/drivers/acpi/acpica/exconcat.c b/drivers/acpi/acpica/exconcat.c
index 76bfb7dcae2f..59b8de2f07d3 100644
--- a/drivers/acpi/acpica/exconcat.c
+++ b/drivers/acpi/acpica/exconcat.c
@@ -156,7 +156,7 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0,
status =
acpi_ex_convert_to_integer(local_operand1, &temp_operand1,
- ACPI_STRTOUL_BASE16);
+ ACPI_IMPLICIT_CONVERSION);
break;
case ACPI_TYPE_BUFFER:
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c
index f71028e334ee..23ebadb06a95 100644
--- a/drivers/acpi/acpica/exconvrt.c
+++ b/drivers/acpi/acpica/exconvrt.c
@@ -57,10 +57,10 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length);
*
* FUNCTION: acpi_ex_convert_to_integer
*
- * PARAMETERS: obj_desc - Object to be converted. Must be an
- * Integer, Buffer, or String
- * result_desc - Where the new Integer object is returned
- * flags - Used for string conversion
+ * PARAMETERS: obj_desc - Object to be converted. Must be an
+ * Integer, Buffer, or String
+ * result_desc - Where the new Integer object is returned
+ * implicit_conversion - Used for string conversion
*
* RETURN: Status
*
@@ -70,14 +70,14 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length);
acpi_status
acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc,
- union acpi_operand_object **result_desc, u32 flags)
+ union acpi_operand_object **result_desc,
+ u32 implicit_conversion)
{
union acpi_operand_object *return_desc;
u8 *pointer;
u64 result;
u32 i;
u32 count;
- acpi_status status;
ACPI_FUNCTION_TRACE_PTR(ex_convert_to_integer, obj_desc);
@@ -123,12 +123,18 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc,
* hexadecimal as per the ACPI specification. The only exception (as
* of ACPI 3.0) is that the to_integer() operator allows both decimal
* and hexadecimal strings (hex prefixed with "0x").
+ *
+ * Explicit conversion is used only by to_integer.
+ * All other string-to-integer conversions are implicit conversions.
*/
- status = acpi_ut_strtoul64(ACPI_CAST_PTR(char, pointer),
- (acpi_gbl_integer_byte_width |
- flags), &result);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ if (implicit_conversion) {
+ result =
+ acpi_ut_implicit_strtoul64(ACPI_CAST_PTR
+ (char, pointer));
+ } else {
+ result =
+ acpi_ut_explicit_strtoul64(ACPI_CAST_PTR
+ (char, pointer));
}
break;
@@ -631,7 +637,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type,
*/
status =
acpi_ex_convert_to_integer(source_desc, result_desc,
- ACPI_STRTOUL_BASE16);
+ ACPI_IMPLICIT_CONVERSION);
break;
case ACPI_TYPE_STRING:
diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c
index 1e7649ce0a7b..dbad3ebd7df5 100644
--- a/drivers/acpi/acpica/exmisc.c
+++ b/drivers/acpi/acpica/exmisc.c
@@ -330,7 +330,7 @@ acpi_ex_do_logical_op(u16 opcode,
case ACPI_TYPE_INTEGER:
status = acpi_ex_convert_to_integer(operand1, &local_operand1,
- ACPI_STRTOUL_BASE16);
+ ACPI_IMPLICIT_CONVERSION);
break;
case ACPI_TYPE_STRING:
diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c
index c4852429e2ff..1c7c9962b0de 100644
--- a/drivers/acpi/acpica/exresop.c
+++ b/drivers/acpi/acpica/exresop.c
@@ -415,7 +415,7 @@ acpi_ex_resolve_operands(u16 opcode,
* Known as "Implicit Source Operand Conversion"
*/
status = acpi_ex_convert_to_integer(obj_desc, stack_ptr,
- ACPI_STRTOUL_BASE16);
+ ACPI_IMPLICIT_CONVERSION);
if (ACPI_FAILURE(status)) {
if (status == AE_TYPE) {
ACPI_ERROR((AE_INFO,
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index 5eb11b30a79e..09b6822aa5cc 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -99,7 +99,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
{
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status = AE_OK;
- u32 enable_mask;
+ u64 enable_mask;
u32 register_bit;
ACPI_FUNCTION_ENTRY();
@@ -214,7 +214,7 @@ acpi_status
acpi_hw_get_gpe_status(struct acpi_gpe_event_info *gpe_event_info,
acpi_event_status *event_status)
{
- u32 in_byte;
+ u64 in_byte;
u32 register_bit;
struct acpi_gpe_register_info *gpe_register_info;
acpi_event_status local_event_status = 0;
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index acb417b58bbb..aa6e00081915 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -220,16 +220,15 @@ acpi_hw_validate_register(struct acpi_generic_address *reg,
*
* RETURN: Status
*
- * DESCRIPTION: Read from either memory or IO space. This is a 32-bit max
- * version of acpi_read, used internally since the overhead of
- * 64-bit values is not needed.
+ * DESCRIPTION: Read from either memory or IO space. This is a 64-bit max
+ * version of acpi_read.
*
* LIMITATIONS: <These limitations also apply to acpi_hw_write>
* space_ID must be system_memory or system_IO.
*
******************************************************************************/
-acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
+acpi_status acpi_hw_read(u64 *value, struct acpi_generic_address *reg)
{
u64 address;
u8 access_width;
@@ -244,17 +243,17 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
/* Validate contents of the GAS register */
- status = acpi_hw_validate_register(reg, 32, &address);
+ status = acpi_hw_validate_register(reg, 64, &address);
if (ACPI_FAILURE(status)) {
return (status);
}
/*
- * Initialize entire 32-bit return value to zero, convert access_width
+ * Initialize entire 64-bit return value to zero, convert access_width
* into number of bits based
*/
*value = 0;
- access_width = acpi_hw_get_access_bit_width(address, reg, 32);
+ access_width = acpi_hw_get_access_bit_width(address, reg, 64);
bit_width = reg->bit_offset + reg->bit_width;
bit_offset = reg->bit_offset;
@@ -265,7 +264,7 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
index = 0;
while (bit_width) {
if (bit_offset >= access_width) {
- value32 = 0;
+ value64 = 0;
bit_offset -= access_width;
} else {
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
@@ -276,7 +275,6 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
ACPI_DIV_8
(access_width),
&value64, access_width);
- value32 = (u32)value64;
} else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
status = acpi_hw_read_port((acpi_io_address)
@@ -286,15 +284,16 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
(access_width),
&value32,
access_width);
+ value64 = (u64)value32;
}
}
/*
* Use offset style bit writes because "Index * AccessWidth" is
- * ensured to be less than 32-bits by acpi_hw_validate_register().
+ * ensured to be less than 64-bits by acpi_hw_validate_register().
*/
ACPI_SET_BITS(value, index * access_width,
- ACPI_MASK_BITS_ABOVE_32(access_width), value32);
+ ACPI_MASK_BITS_ABOVE_64(access_width), value64);
bit_width -=
bit_width > access_width ? access_width : bit_width;
@@ -302,8 +301,9 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
}
ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n",
- *value, access_width, ACPI_FORMAT_UINT64(address),
+ "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n",
+ ACPI_FORMAT_UINT64(*value), access_width,
+ ACPI_FORMAT_UINT64(address),
acpi_ut_get_region_name(reg->space_id)));
return (status);
@@ -318,20 +318,18 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
*
* RETURN: Status
*
- * DESCRIPTION: Write to either memory or IO space. This is a 32-bit max
- * version of acpi_write, used internally since the overhead of
- * 64-bit values is not needed.
+ * DESCRIPTION: Write to either memory or IO space. This is a 64-bit max
+ * version of acpi_write.
*
******************************************************************************/
-acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg)
+acpi_status acpi_hw_write(u64 value, struct acpi_generic_address *reg)
{
u64 address;
u8 access_width;
u32 bit_width;
u8 bit_offset;
u64 value64;
- u32 value32;
u8 index;
acpi_status status;
@@ -339,14 +337,14 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg)
/* Validate contents of the GAS register */
- status = acpi_hw_validate_register(reg, 32, &address);
+ status = acpi_hw_validate_register(reg, 64, &address);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Convert access_width into number of bits based */
- access_width = acpi_hw_get_access_bit_width(address, reg, 32);
+ access_width = acpi_hw_get_access_bit_width(address, reg, 64);
bit_width = reg->bit_offset + reg->bit_width;
bit_offset = reg->bit_offset;
@@ -358,16 +356,15 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg)
while (bit_width) {
/*
* Use offset style bit reads because "Index * AccessWidth" is
- * ensured to be less than 32-bits by acpi_hw_validate_register().
+ * ensured to be less than 64-bits by acpi_hw_validate_register().
*/
- value32 = ACPI_GET_BITS(&value, index * access_width,
- ACPI_MASK_BITS_ABOVE_32(access_width));
+ value64 = ACPI_GET_BITS(&value, index * access_width,
+ ACPI_MASK_BITS_ABOVE_64(access_width));
if (bit_offset >= access_width) {
bit_offset -= access_width;
} else {
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
- value64 = (u64)value32;
status =
acpi_os_write_memory((acpi_physical_address)
address +
@@ -382,7 +379,7 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg)
index *
ACPI_DIV_8
(access_width),
- value32,
+ (u32)value64,
access_width);
}
}
@@ -397,8 +394,9 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg)
}
ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n",
- value, access_width, ACPI_FORMAT_UINT64(address),
+ "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n",
+ ACPI_FORMAT_UINT64(value), access_width,
+ ACPI_FORMAT_UINT64(address),
acpi_ut_get_region_name(reg->space_id)));
return (status);
@@ -526,6 +524,7 @@ acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control)
acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value)
{
u32 value = 0;
+ u64 value64;
acpi_status status;
ACPI_FUNCTION_TRACE(hw_register_read);
@@ -564,12 +563,14 @@ acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value)
case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */
status =
- acpi_hw_read(&value, &acpi_gbl_FADT.xpm2_control_block);
+ acpi_hw_read(&value64, &acpi_gbl_FADT.xpm2_control_block);
+ value = (u32)value64;
break;
case ACPI_REGISTER_PM_TIMER: /* 32-bit access */
- status = acpi_hw_read(&value, &acpi_gbl_FADT.xpm_timer_block);
+ status = acpi_hw_read(&value64, &acpi_gbl_FADT.xpm_timer_block);
+ value = (u32)value64;
break;
case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */
@@ -586,7 +587,7 @@ acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value)
}
if (ACPI_SUCCESS(status)) {
- *return_value = value;
+ *return_value = (u32)value;
}
return_ACPI_STATUS(status);
@@ -622,6 +623,7 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value)
{
acpi_status status;
u32 read_value;
+ u64 read_value64;
ACPI_FUNCTION_TRACE(hw_register_write);
@@ -685,11 +687,12 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value)
* as per the ACPI spec.
*/
status =
- acpi_hw_read(&read_value,
+ acpi_hw_read(&read_value64,
&acpi_gbl_FADT.xpm2_control_block);
if (ACPI_FAILURE(status)) {
goto exit;
}
+ read_value = (u32)read_value64;
/* Insert the bits to be preserved */
@@ -745,22 +748,25 @@ acpi_hw_read_multiple(u32 *value,
{
u32 value_a = 0;
u32 value_b = 0;
+ u64 value64;
acpi_status status;
/* The first register is always required */
- status = acpi_hw_read(&value_a, register_a);
+ status = acpi_hw_read(&value64, register_a);
if (ACPI_FAILURE(status)) {
return (status);
}
+ value_a = (u32)value64;
/* Second register is optional */
if (register_b->address) {
- status = acpi_hw_read(&value_b, register_b);
+ status = acpi_hw_read(&value64, register_b);
if (ACPI_FAILURE(status)) {
return (status);
}
+ value_b = (u32)value64;
}
/*
diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c
index b3c5d8c754bb..a2f4e25d45b1 100644
--- a/drivers/acpi/acpica/hwtimer.c
+++ b/drivers/acpi/acpica/hwtimer.c
@@ -94,6 +94,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_timer_resolution)
acpi_status acpi_get_timer(u32 * ticks)
{
acpi_status status;
+ u64 timer_value;
ACPI_FUNCTION_TRACE(acpi_get_timer);
@@ -107,7 +108,14 @@ acpi_status acpi_get_timer(u32 * ticks)
return_ACPI_STATUS(AE_SUPPORT);
}
- status = acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
+ status = acpi_hw_read(&timer_value, &acpi_gbl_FADT.xpm_timer_block);
+ if (ACPI_SUCCESS(status)) {
+
+ /* ACPI PM Timer is defined to be 32 bits (PM_TMR_LEN) */
+
+ *ticks = (u32)timer_value;
+ }
+
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index 34684ae89981..b3c6e439933c 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -125,76 +125,12 @@ ACPI_EXPORT_SYMBOL(acpi_reset)
******************************************************************************/
acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
{
- u32 value_lo;
- u32 value_hi;
- u32 width;
- u64 address;
acpi_status status;
ACPI_FUNCTION_NAME(acpi_read);
- if (!return_value) {
- return (AE_BAD_PARAMETER);
- }
-
- /* Validate contents of the GAS register. Allow 64-bit transfers */
-
- status = acpi_hw_validate_register(reg, 64, &address);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- /*
- * Two address spaces supported: Memory or I/O. PCI_Config is
- * not supported here because the GAS structure is insufficient
- */
- if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
- status = acpi_os_read_memory((acpi_physical_address)
- address, return_value,
- reg->bit_width);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
-
- value_lo = 0;
- value_hi = 0;
-
- width = reg->bit_width;
- if (width == 64) {
- width = 32; /* Break into two 32-bit transfers */
- }
-
- status = acpi_hw_read_port((acpi_io_address)
- address, &value_lo, width);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- if (reg->bit_width == 64) {
-
- /* Read the top 32 bits */
-
- status = acpi_hw_read_port((acpi_io_address)
- (address + 4), &value_hi,
- 32);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- }
-
- /* Set the return value only if status is AE_OK */
-
- *return_value = (value_lo | ((u64)value_hi << 32));
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n",
- ACPI_FORMAT_UINT64(*return_value), reg->bit_width,
- ACPI_FORMAT_UINT64(address),
- acpi_ut_get_region_name(reg->space_id)));
-
- return (AE_OK);
+ status = acpi_hw_read(return_value, reg);
+ return (status);
}
ACPI_EXPORT_SYMBOL(acpi_read)
@@ -213,59 +149,11 @@ ACPI_EXPORT_SYMBOL(acpi_read)
******************************************************************************/
acpi_status acpi_write(u64 value, struct acpi_generic_address *reg)
{
- u32 width;
- u64 address;
acpi_status status;
ACPI_FUNCTION_NAME(acpi_write);
- /* Validate contents of the GAS register. Allow 64-bit transfers */
-
- status = acpi_hw_validate_register(reg, 64, &address);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- /*
- * Two address spaces supported: Memory or IO. PCI_Config is
- * not supported here because the GAS structure is insufficient
- */
- if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
- status = acpi_os_write_memory((acpi_physical_address)
- address, value, reg->bit_width);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
-
- width = reg->bit_width;
- if (width == 64) {
- width = 32; /* Break into two 32-bit transfers */
- }
-
- status = acpi_hw_write_port((acpi_io_address)
- address, ACPI_LODWORD(value),
- width);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- if (reg->bit_width == 64) {
- status = acpi_hw_write_port((acpi_io_address)
- (address + 4),
- ACPI_HIDWORD(value), 32);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- }
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n",
- ACPI_FORMAT_UINT64(value), reg->bit_width,
- ACPI_FORMAT_UINT64(address),
- acpi_ut_get_region_name(reg->space_id)));
-
+ status = acpi_hw_write(value, reg);
return (status);
}
diff --git a/drivers/acpi/acpica/nsconvert.c b/drivers/acpi/acpica/nsconvert.c
index e4a7da8a11f0..539d775bbc92 100644
--- a/drivers/acpi/acpica/nsconvert.c
+++ b/drivers/acpi/acpica/nsconvert.c
@@ -78,8 +78,8 @@ acpi_ns_convert_to_integer(union acpi_operand_object *original_object,
/* String-to-Integer conversion */
- status = acpi_ut_strtoul64(original_object->string.pointer,
- acpi_gbl_integer_byte_width, &value);
+ status =
+ acpi_ut_strtoul64(original_object->string.pointer, &value);
if (ACPI_FAILURE(status)) {
return (status);
}
diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index 26ad596c973e..5ecb8d2e6834 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -173,10 +173,13 @@ acpi_status ACPI_INIT_FUNCTION acpi_reallocate_root_table(void)
ACPI_FUNCTION_TRACE(acpi_reallocate_root_table);
/*
- * Only reallocate the root table if the host provided a static buffer
- * for the table array in the call to acpi_initialize_tables.
+ * If there are tables unverified, it is required to reallocate the
+ * root table list to clean up invalid table entries. Otherwise only
+ * reallocate the root table list if the host provided a static buffer
+ * for the table array in the call to acpi_initialize_tables().
*/
- if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) {
+ if ((acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) &&
+ acpi_gbl_enable_table_validation) {
return_ACPI_STATUS(AE_SUPPORT);
}
diff --git a/drivers/acpi/acpica/utstrsuppt.c b/drivers/acpi/acpica/utstrsuppt.c
new file mode 100644
index 000000000000..965fb5cec94f
--- /dev/null
+++ b/drivers/acpi/acpica/utstrsuppt.c
@@ -0,0 +1,438 @@
+/*******************************************************************************
+ *
+ * Module Name: utstrsuppt - Support functions for string-to-integer conversion
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2017, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utstrsuppt")
+
+/* Local prototypes */
+static acpi_status
+acpi_ut_insert_digit(u64 *accumulated_value, u32 base, int ascii_digit);
+
+static acpi_status
+acpi_ut_strtoul_multiply64(u64 multiplicand, u64 multiplier, u64 *out_product);
+
+static acpi_status
+acpi_ut_strtoul_add64(u64 addend1, u64 addend2, u64 *out_sum);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_convert_octal_string
+ *
+ * PARAMETERS: string - Null terminated input string
+ * return_value_ptr - Where the converted value is returned
+ *
+ * RETURN: Status and 64-bit converted integer
+ *
+ * DESCRIPTION: Performs a base 8 conversion of the input string to an
+ * integer value, either 32 or 64 bits.
+ *
+ * NOTE: Maximum 64-bit unsigned octal value is 01777777777777777777777
+ * Maximum 32-bit unsigned octal value is 037777777777
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_convert_octal_string(char *string, u64 *return_value_ptr)
+{
+ u64 accumulated_value = 0;
+ acpi_status status = AE_OK;
+
+ /* Convert each ASCII byte in the input string */
+
+ while (*string) {
+
+ /* Character must be ASCII 0-7, otherwise terminate with no error */
+
+ if (!(ACPI_IS_OCTAL_DIGIT(*string))) {
+ break;
+ }
+
+ /* Convert and insert this octal digit into the accumulator */
+
+ status = acpi_ut_insert_digit(&accumulated_value, 8, *string);
+ if (ACPI_FAILURE(status)) {
+ status = AE_OCTAL_OVERFLOW;
+ break;
+ }
+
+ string++;
+ }
+
+ /* Always return the value that has been accumulated */
+
+ *return_value_ptr = accumulated_value;
+ return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_convert_decimal_string
+ *
+ * PARAMETERS: string - Null terminated input string
+ * return_value_ptr - Where the converted value is returned
+ *
+ * RETURN: Status and 64-bit converted integer
+ *
+ * DESCRIPTION: Performs a base 10 conversion of the input string to an
+ * integer value, either 32 or 64 bits.
+ *
+ * NOTE: Maximum 64-bit unsigned decimal value is 18446744073709551615
+ * Maximum 32-bit unsigned decimal value is 4294967295
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_convert_decimal_string(char *string, u64 *return_value_ptr)
+{
+ u64 accumulated_value = 0;
+ acpi_status status = AE_OK;
+
+ /* Convert each ASCII byte in the input string */
+
+ while (*string) {
+
+ /* Character must be ASCII 0-9, otherwise terminate with no error */
+
+ if (!isdigit(*string)) {
+ break;
+ }
+
+ /* Convert and insert this decimal digit into the accumulator */
+
+ status = acpi_ut_insert_digit(&accumulated_value, 10, *string);
+ if (ACPI_FAILURE(status)) {
+ status = AE_DECIMAL_OVERFLOW;
+ break;
+ }
+
+ string++;
+ }
+
+ /* Always return the value that has been accumulated */
+
+ *return_value_ptr = accumulated_value;
+ return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_convert_hex_string
+ *
+ * PARAMETERS: string - Null terminated input string
+ * return_value_ptr - Where the converted value is returned
+ *
+ * RETURN: Status and 64-bit converted integer
+ *
+ * DESCRIPTION: Performs a base 16 conversion of the input string to an
+ * integer value, either 32 or 64 bits.
+ *
+ * NOTE: Maximum 64-bit unsigned hex value is 0xFFFFFFFFFFFFFFFF
+ * Maximum 32-bit unsigned hex value is 0xFFFFFFFF
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_convert_hex_string(char *string, u64 *return_value_ptr)
+{
+ u64 accumulated_value = 0;
+ acpi_status status = AE_OK;
+
+ /* Convert each ASCII byte in the input string */
+
+ while (*string) {
+
+ /* Must be ASCII A-F, a-f, or 0-9, otherwise terminate with no error */
+
+ if (!isxdigit(*string)) {
+ break;
+ }
+
+ /* Convert and insert this hex digit into the accumulator */
+
+ status = acpi_ut_insert_digit(&accumulated_value, 16, *string);
+ if (ACPI_FAILURE(status)) {
+ status = AE_HEX_OVERFLOW;
+ break;
+ }
+
+ string++;
+ }
+
+ /* Always return the value that has been accumulated */
+
+ *return_value_ptr = accumulated_value;
+ return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_remove_leading_zeros
+ *
+ * PARAMETERS: string - Pointer to input ASCII string
+ *
+ * RETURN: Next character after any leading zeros. This character may be
+ * used by the caller to detect end-of-string.
+ *
+ * DESCRIPTION: Remove any leading zeros in the input string. Return the
+ * next character after the final ASCII zero to enable the caller
+ * to check for the end of the string (NULL terminator).
+ *
+ ******************************************************************************/
+
+char acpi_ut_remove_leading_zeros(char **string)
+{
+
+ while (**string == ACPI_ASCII_ZERO) {
+ *string += 1;
+ }
+
+ return (**string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_remove_whitespace
+ *
+ * PARAMETERS: string - Pointer to input ASCII string
+ *
+ * RETURN: Next character after any whitespace. This character may be
+ * used by the caller to detect end-of-string.
+ *
+ * DESCRIPTION: Remove any leading whitespace in the input string. Return the
+ * next character after the final ASCII zero to enable the caller
+ * to check for the end of the string (NULL terminator).
+ *
+ ******************************************************************************/
+
+char acpi_ut_remove_whitespace(char **string)
+{
+
+ while (isspace((u8)**string)) {
+ *string += 1;
+ }
+
+ return (**string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_detect_hex_prefix
+ *
+ * PARAMETERS: string - Pointer to input ASCII string
+ *
+ * RETURN: TRUE if a "0x" prefix was found at the start of the string
+ *
+ * DESCRIPTION: Detect and remove a hex "0x" prefix
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_detect_hex_prefix(char **string)
+{
+
+ if ((**string == ACPI_ASCII_ZERO) &&
+ (tolower((int)*(*string + 1)) == 'x')) {
+ *string += 2; /* Go past the leading 0x */
+ return (TRUE);
+ }
+
+ return (FALSE); /* Not a hex string */
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_detect_octal_prefix
+ *
+ * PARAMETERS: string - Pointer to input ASCII string
+ *
+ * RETURN: True if an octal "0" prefix was found at the start of the
+ * string
+ *
+ * DESCRIPTION: Detect and remove an octal prefix (zero)
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_detect_octal_prefix(char **string)
+{
+
+ if (**string == ACPI_ASCII_ZERO) {
+ *string += 1; /* Go past the leading 0 */
+ return (TRUE);
+ }
+
+ return (FALSE); /* Not an octal string */
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_insert_digit
+ *
+ * PARAMETERS: accumulated_value - Current value of the integer value
+ * accumulator. The new value is
+ * returned here.
+ * base - Radix, either 8/10/16
+ * ascii_digit - ASCII single digit to be inserted
+ *
+ * RETURN: Status and result of the convert/insert operation. The only
+ * possible returned exception code is numeric overflow of
+ * either the multiply or add conversion operations.
+ *
+ * DESCRIPTION: Generic conversion and insertion function for all bases:
+ *
+ * 1) Multiply the current accumulated/converted value by the
+ * base in order to make room for the new character.
+ *
+ * 2) Convert the new character to binary and add it to the
+ * current accumulated value.
+ *
+ * Note: The only possible exception indicates an integer
+ * overflow (AE_NUMERIC_OVERFLOW)
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_insert_digit(u64 *accumulated_value, u32 base, int ascii_digit)
+{
+ acpi_status status;
+ u64 product;
+
+ /* Make room in the accumulated value for the incoming digit */
+
+ status = acpi_ut_strtoul_multiply64(*accumulated_value, base, &product);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Add in the new digit, and store the sum to the accumulated value */
+
+ status =
+ acpi_ut_strtoul_add64(product,
+ acpi_ut_ascii_char_to_hex(ascii_digit),
+ accumulated_value);
+
+ return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strtoul_multiply64
+ *
+ * PARAMETERS: multiplicand - Current accumulated converted integer
+ * multiplier - Base/Radix
+ * out_product - Where the product is returned
+ *
+ * RETURN: Status and 64-bit product
+ *
+ * DESCRIPTION: Multiply two 64-bit values, with checking for 64-bit overflow as
+ * well as 32-bit overflow if necessary (if the current global
+ * integer width is 32).
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_strtoul_multiply64(u64 multiplicand, u64 multiplier, u64 *out_product)
+{
+ u64 val;
+
+ /* Exit if either operand is zero */
+
+ *out_product = 0;
+ if (!multiplicand || !multiplier) {
+ return (AE_OK);
+ }
+
+ /* Check for 64-bit overflow before the actual multiplication */
+
+ acpi_ut_short_divide(ACPI_UINT64_MAX, (u32)multiplier, &val, NULL);
+ if (multiplicand > val) {
+ return (AE_NUMERIC_OVERFLOW);
+ }
+
+ val = multiplicand * multiplier;
+
+ /* Check for 32-bit overflow if necessary */
+
+ if ((acpi_gbl_integer_bit_width == 32) && (val > ACPI_UINT32_MAX)) {
+ return (AE_NUMERIC_OVERFLOW);
+ }
+
+ *out_product = val;
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strtoul_add64
+ *
+ * PARAMETERS: addend1 - Current accumulated converted integer
+ * addend2 - New hex value/char
+ * out_sum - Where sum is returned (Accumulator)
+ *
+ * RETURN: Status and 64-bit sum
+ *
+ * DESCRIPTION: Add two 64-bit values, with checking for 64-bit overflow as
+ * well as 32-bit overflow if necessary (if the current global
+ * integer width is 32).
+ *
+ ******************************************************************************/
+
+static acpi_status acpi_ut_strtoul_add64(u64 addend1, u64 addend2, u64 *out_sum)
+{
+ u64 sum;
+
+ /* Check for 64-bit overflow before the actual addition */
+
+ if ((addend1 > 0) && (addend2 > (ACPI_UINT64_MAX - addend1))) {
+ return (AE_NUMERIC_OVERFLOW);
+ }
+
+ sum = addend1 + addend2;
+
+ /* Check for 32-bit overflow if necessary */
+
+ if ((acpi_gbl_integer_bit_width == 32) && (sum > ACPI_UINT32_MAX)) {
+ return (AE_NUMERIC_OVERFLOW);
+ }
+
+ *out_sum = sum;
+ return (AE_OK);
+}
diff --git a/drivers/acpi/acpica/utstrtoul64.c b/drivers/acpi/acpica/utstrtoul64.c
index 9633ee142855..e2067dcb9389 100644
--- a/drivers/acpi/acpica/utstrtoul64.c
+++ b/drivers/acpi/acpica/utstrtoul64.c
@@ -1,6 +1,7 @@
/*******************************************************************************
*
- * Module Name: utstrtoul64 - string to 64-bit integer support
+ * Module Name: utstrtoul64 - String-to-integer conversion support for both
+ * 64-bit and 32-bit integers
*
******************************************************************************/
@@ -44,304 +45,319 @@
#include <acpi/acpi.h>
#include "accommon.h"
-/*******************************************************************************
- *
- * The functions in this module satisfy the need for 64-bit string-to-integer
- * conversions on both 32-bit and 64-bit platforms.
- *
- ******************************************************************************/
-
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utstrtoul64")
-/* Local prototypes */
-static u64 acpi_ut_strtoul_base10(char *string, u32 flags);
-
-static u64 acpi_ut_strtoul_base16(char *string, u32 flags);
-
/*******************************************************************************
*
- * String conversion rules as written in the ACPI specification. The error
- * conditions and behavior are different depending on the type of conversion.
- *
- *
- * Implicit data type conversion: string-to-integer
- * --------------------------------------------------
- *
- * Base is always 16. This is the ACPI_STRTOUL_BASE16 case.
- *
- * Example:
- * Add ("BA98", Arg0, Local0)
- *
- * The integer is initialized to the value zero.
- * The ASCII string is interpreted as a hexadecimal constant.
+ * This module contains the top-level string to 64/32-bit unsigned integer
+ * conversion functions:
*
- * 1) A "0x" prefix is not allowed. However, ACPICA allows this for
- * compatibility with previous ACPICA. (NO ERROR)
+ * 1) A standard strtoul() function that supports 64-bit integers, base
+ * 8/10/16, with integer overflow support. This is used mainly by the
+ * iASL compiler, which implements tighter constraints on integer
+ * constants than the runtime (interpreter) integer-to-string conversions.
+ * 2) Runtime "Explicit conversion" as defined in the ACPI specification.
+ * 3) Runtime "Implicit conversion" as defined in the ACPI specification.
*
- * 2) Terminates when the size of an integer is reached (32 or 64 bits).
- * (NO ERROR)
+ * Current users of this module:
*
- * 3) The first non-hex character terminates the conversion without error.
- * (NO ERROR)
- *
- * 4) Conversion of a null (zero-length) string to an integer is not
- * allowed. However, ACPICA allows this for compatibility with previous
- * ACPICA. This conversion returns the value 0. (NO ERROR)
- *
- *
- * Explicit data type conversion: to_integer() with string operand
- * ---------------------------------------------------------------
- *
- * Base is either 10 (default) or 16 (with 0x prefix)
- *
- * Examples:
- * to_integer ("1000")
- * to_integer ("0xABCD")
- *
- * 1) Can be (must be) either a decimal or hexadecimal numeric string.
- * A hex value must be prefixed by "0x" or it is interpreted as a decimal.
+ * iASL - Preprocessor (constants and math expressions)
+ * iASL - Main parser, conversion of constants to integers
+ * iASL - Data Table Compiler parser (constants and math expressions)
+ * interpreter - Implicit and explicit conversions, GPE method names
+ * interpreter - Repair code for return values from predefined names
+ * debugger - Command line input string conversion
+ * acpi_dump - ACPI table physical addresses
+ * acpi_exec - Support for namespace overrides
*
- * 2) The value must not exceed the maximum of an integer value. ACPI spec
- * states the behavior is "unpredictable", so ACPICA matches the behavior
- * of the implicit conversion case.(NO ERROR)
+ * Notes concerning users of these interfaces:
*
- * 3) Behavior on the first non-hex character is not specified by the ACPI
- * spec, so ACPICA matches the behavior of the implicit conversion case
- * and terminates. (NO ERROR)
+ * acpi_gbl_integer_byte_width is used to set the 32/64 bit limit for explicit
+ * and implicit conversions. This global must be set to the proper width.
+ * For the core ACPICA code, the width depends on the DSDT version. For the
+ * acpi_ut_strtoul64 interface, all conversions are 64 bits. This interface is
+ * used primarily for iASL, where the default width is 64 bits for all parsers,
+ * but error checking is performed later to flag cases where a 64-bit constant
+ * is wrongly defined in a 32-bit DSDT/SSDT.
*
- * 4) A null (zero-length) string is illegal.
- * However, ACPICA allows this for compatibility with previous ACPICA.
- * This conversion returns the value 0. (NO ERROR)
+ * In ACPI, the only place where octal numbers are supported is within
+ * the ASL language itself. This is implemented via the main acpi_ut_strtoul64
+ * interface. According the ACPI specification, there is no ACPI runtime
+ * support (explicit/implicit) for octal string conversions.
*
******************************************************************************/
-
/*******************************************************************************
*
* FUNCTION: acpi_ut_strtoul64
*
- * PARAMETERS: string - Null terminated input string
- * flags - Conversion info, see below
+ * PARAMETERS: string - Null terminated input string,
+ * must be a valid pointer
* return_value - Where the converted integer is
- * returned
- *
- * RETURN: Status and Converted value
+ * returned. Must be a valid pointer
*
- * DESCRIPTION: Convert a string into an unsigned value. Performs either a
- * 32-bit or 64-bit conversion, depending on the input integer
- * size in Flags (often the current mode of the interpreter).
+ * RETURN: Status and converted integer. Returns an exception on a
+ * 64-bit numeric overflow
*
- * Values for Flags:
- * ACPI_STRTOUL_32BIT - Max integer value is 32 bits
- * ACPI_STRTOUL_64BIT - Max integer value is 64 bits
- * ACPI_STRTOUL_BASE16 - Input string is hexadecimal. Default
- * is 10/16 based on string prefix (0x).
+ * DESCRIPTION: Convert a string into an unsigned integer. Always performs a
+ * full 64-bit conversion, regardless of the current global
+ * integer width. Supports Decimal, Hex, and Octal strings.
*
- * NOTES:
- * Negative numbers are not supported, as they are not supported by ACPI.
+ * Current users of this function:
*
- * Supports only base 16 or base 10 strings/values. Does not
- * support Octal strings, as these are not supported by ACPI.
- *
- * Current users of this support:
- *
- * interpreter - Implicit and explicit conversions, GPE method names
- * debugger - Command line input string conversion
- * iASL - Main parser, conversion of constants to integers
- * iASL - Data Table Compiler parser (constant math expressions)
- * iASL - Preprocessor (constant math expressions)
- * acpi_dump - Input table addresses
- * acpi_exec - Testing of the acpi_ut_strtoul64 function
- *
- * Note concerning callers:
- * acpi_gbl_integer_byte_width can be used to set the 32/64 limit. If used,
- * this global should be set to the proper width. For the core ACPICA code,
- * this width depends on the DSDT version. For iASL, the default byte
- * width is always 8 for the parser, but error checking is performed later
- * to flag cases where a 64-bit constant is defined in a 32-bit DSDT/SSDT.
+ * iASL - Preprocessor (constants and math expressions)
+ * iASL - Main ASL parser, conversion of ASL constants to integers
+ * iASL - Data Table Compiler parser (constants and math expressions)
+ * interpreter - Repair code for return values from predefined names
+ * acpi_dump - ACPI table physical addresses
+ * acpi_exec - Support for namespace overrides
*
******************************************************************************/
-
-acpi_status acpi_ut_strtoul64(char *string, u32 flags, u64 *return_value)
+acpi_status acpi_ut_strtoul64(char *string, u64 *return_value)
{
acpi_status status = AE_OK;
- u32 base;
+ u8 original_bit_width;
+ u32 base = 10; /* Default is decimal */
ACPI_FUNCTION_TRACE_STR(ut_strtoul64, string);
- /* Parameter validation */
-
- if (!string || !return_value) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
*return_value = 0;
- /* Check for zero-length string, returns 0 */
+ /* A NULL return string returns a value of zero */
if (*string == 0) {
return_ACPI_STATUS(AE_OK);
}
- /* Skip over any white space at start of string */
-
- while (isspace((int)*string)) {
- string++;
- }
-
- /* End of string? return 0 */
-
- if (*string == 0) {
+ if (!acpi_ut_remove_whitespace(&string)) {
return_ACPI_STATUS(AE_OK);
}
/*
- * 1) The "0x" prefix indicates base 16. Per the ACPI specification,
- * the "0x" prefix is only allowed for implicit (non-strict) conversions.
- * However, we always allow it for compatibility with older ACPICA.
+ * 1) Check for a hex constant. A "0x" prefix indicates base 16.
*/
- if ((*string == ACPI_ASCII_ZERO) &&
- (tolower((int)*(string + 1)) == 'x')) {
- string += 2; /* Go past the 0x */
- if (*string == 0) {
- return_ACPI_STATUS(AE_OK); /* Return value 0 */
- }
-
+ if (acpi_ut_detect_hex_prefix(&string)) {
base = 16;
}
- /* 2) Force to base 16 (implicit conversion case) */
-
- else if (flags & ACPI_STRTOUL_BASE16) {
- base = 16;
+ /*
+ * 2) Check for an octal constant, defined to be a leading zero
+ * followed by sequence of octal digits (0-7)
+ */
+ else if (acpi_ut_detect_octal_prefix(&string)) {
+ base = 8;
}
- /* 3) Default fallback is to Base 10 */
-
- else {
- base = 10;
+ if (!acpi_ut_remove_leading_zeros(&string)) {
+ return_ACPI_STATUS(AE_OK); /* Return value 0 */
}
- /* Skip all leading zeros */
+ /*
+ * Force a full 64-bit conversion. The caller (usually iASL) must
+ * check for a 32-bit overflow later as necessary (If current mode
+ * is 32-bit, meaning a 32-bit DSDT).
+ */
+ original_bit_width = acpi_gbl_integer_bit_width;
+ acpi_gbl_integer_bit_width = 64;
- while (*string == ACPI_ASCII_ZERO) {
- string++;
- if (*string == 0) {
- return_ACPI_STATUS(AE_OK); /* Return value 0 */
- }
+ /*
+ * Perform the base 8, 10, or 16 conversion. A 64-bit numeric overflow
+ * will return an exception (to allow iASL to flag the statement).
+ */
+ switch (base) {
+ case 8:
+ status = acpi_ut_convert_octal_string(string, return_value);
+ break;
+
+ case 10:
+ status = acpi_ut_convert_decimal_string(string, return_value);
+ break;
+
+ case 16:
+ default:
+ status = acpi_ut_convert_hex_string(string, return_value);
+ break;
}
- /* Perform the base 16 or 10 conversion */
-
- if (base == 16) {
- *return_value = acpi_ut_strtoul_base16(string, flags);
- } else {
- *return_value = acpi_ut_strtoul_base10(string, flags);
- }
+ /* Only possible exception from above is a 64-bit overflow */
+ acpi_gbl_integer_bit_width = original_bit_width;
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
- * FUNCTION: acpi_ut_strtoul_base10
+ * FUNCTION: acpi_ut_implicit_strtoul64
+ *
+ * PARAMETERS: string - Null terminated input string,
+ * must be a valid pointer
+ *
+ * RETURN: Converted integer
+ *
+ * DESCRIPTION: Perform a 64-bit conversion with restrictions placed upon
+ * an "implicit conversion" by the ACPI specification. Used by
+ * many ASL operators that require an integer operand, and support
+ * an automatic (implicit) conversion from a string operand
+ * to the final integer operand. The major restriction is that
+ * only hex strings are supported.
+ *
+ * -----------------------------------------------------------------------------
+ *
+ * Base is always 16, either with or without the 0x prefix. Decimal and
+ * Octal strings are not supported, as per the ACPI specification.
+ *
+ * Examples (both are hex values):
+ * Add ("BA98", Arg0, Local0)
+ * Subtract ("0x12345678", Arg1, Local1)
+ *
+ * Conversion rules as extracted from the ACPI specification:
+ *
+ * The converted integer is initialized to the value zero.
+ * The ASCII string is always interpreted as a hexadecimal constant.
+ *
+ * 1) According to the ACPI specification, a "0x" prefix is not allowed.
+ * However, ACPICA allows this as an ACPI extension on general
+ * principle. (NO ERROR)
+ *
+ * 2) The conversion terminates when the size of an integer is reached
+ * (32 or 64 bits). There are no numeric overflow conditions. (NO ERROR)
+ *
+ * 3) The first non-hex character terminates the conversion and returns
+ * the current accumulated value of the converted integer (NO ERROR).
*
- * PARAMETERS: string - Null terminated input string
- * flags - Conversion info
+ * 4) Conversion of a null (zero-length) string to an integer is
+ * technically not allowed. However, ACPICA allows this as an ACPI
+ * extension. The conversion returns the value 0. (NO ERROR)
*
- * RETURN: 64-bit converted integer
+ * NOTE: There are no error conditions returned by this function. At
+ * the minimum, a value of zero is returned.
*
- * DESCRIPTION: Performs a base 10 conversion of the input string to an
- * integer value, either 32 or 64 bits.
- * Note: String must be valid and non-null.
+ * Current users of this function:
+ *
+ * interpreter - All runtime implicit conversions, as per ACPI specification
+ * iASL - Data Table Compiler parser (constants and math expressions)
*
******************************************************************************/
-static u64 acpi_ut_strtoul_base10(char *string, u32 flags)
+u64 acpi_ut_implicit_strtoul64(char *string)
{
- int ascii_digit;
- u64 next_value;
- u64 return_value = 0;
-
- /* Main loop: convert each ASCII byte in the input string */
-
- while (*string) {
- ascii_digit = *string;
- if (!isdigit(ascii_digit)) {
-
- /* Not ASCII 0-9, terminate */
-
- goto exit;
- }
-
- /* Convert and insert (add) the decimal digit */
+ u64 converted_integer = 0;
- acpi_ut_short_multiply(return_value, 10, &next_value);
- next_value += (ascii_digit - ACPI_ASCII_ZERO);
+ ACPI_FUNCTION_TRACE_STR(ut_implicit_strtoul64, string);
- /* Check for overflow (32 or 64 bit) - return current converted value */
+ if (!acpi_ut_remove_whitespace(&string)) {
+ return_VALUE(0);
+ }
- if (((flags & ACPI_STRTOUL_32BIT) && (next_value > ACPI_UINT32_MAX)) || (next_value < return_value)) { /* 64-bit overflow case */
- goto exit;
- }
+ /*
+ * Per the ACPI specification, only hexadecimal is supported for
+ * implicit conversions, and the "0x" prefix is "not allowed".
+ * However, allow a "0x" prefix as an ACPI extension.
+ */
+ acpi_ut_detect_hex_prefix(&string);
- return_value = next_value;
- string++;
+ if (!acpi_ut_remove_leading_zeros(&string)) {
+ return_VALUE(0);
}
-exit:
- return (return_value);
+ /*
+ * Ignore overflow as per the ACPI specification. This is implemented by
+ * ignoring the return status from the conversion function called below.
+ * On overflow, the input string is simply truncated.
+ */
+ acpi_ut_convert_hex_string(string, &converted_integer);
+ return_VALUE(converted_integer);
}
/*******************************************************************************
*
- * FUNCTION: acpi_ut_strtoul_base16
+ * FUNCTION: acpi_ut_explicit_strtoul64
+ *
+ * PARAMETERS: string - Null terminated input string,
+ * must be a valid pointer
*
- * PARAMETERS: string - Null terminated input string
- * flags - conversion info
+ * RETURN: Converted integer
*
- * RETURN: 64-bit converted integer
+ * DESCRIPTION: Perform a 64-bit conversion with the restrictions placed upon
+ * an "explicit conversion" by the ACPI specification. The
+ * main restriction is that only hex and decimal are supported.
*
- * DESCRIPTION: Performs a base 16 conversion of the input string to an
- * integer value, either 32 or 64 bits.
- * Note: String must be valid and non-null.
+ * -----------------------------------------------------------------------------
+ *
+ * Base is either 10 (default) or 16 (with 0x prefix). Octal (base 8) strings
+ * are not supported, as per the ACPI specification.
+ *
+ * Examples:
+ * to_integer ("1000") Decimal
+ * to_integer ("0xABCD") Hex
+ *
+ * Conversion rules as extracted from the ACPI specification:
+ *
+ * 1) The input string is either a decimal or hexadecimal numeric string.
+ * A hex value must be prefixed by "0x" or it is interpreted as decimal.
+ *
+ * 2) The value must not exceed the maximum of an integer value
+ * (32 or 64 bits). The ACPI specification states the behavior is
+ * "unpredictable", so ACPICA matches the behavior of the implicit
+ * conversion case. There are no numeric overflow conditions. (NO ERROR)
+ *
+ * 3) Behavior on the first non-hex character is not defined by the ACPI
+ * specification (for the to_integer operator), so ACPICA matches the
+ * behavior of the implicit conversion case. It terminates the
+ * conversion and returns the current accumulated value of the converted
+ * integer. (NO ERROR)
+ *
+ * 4) Conversion of a null (zero-length) string to an integer is
+ * technically not allowed. However, ACPICA allows this as an ACPI
+ * extension. The conversion returns the value 0. (NO ERROR)
+ *
+ * NOTE: There are no error conditions returned by this function. At the
+ * minimum, a value of zero is returned.
+ *
+ * Current users of this function:
+ *
+ * interpreter - Runtime ASL to_integer operator, as per the ACPI specification
*
******************************************************************************/
-static u64 acpi_ut_strtoul_base16(char *string, u32 flags)
+u64 acpi_ut_explicit_strtoul64(char *string)
{
- int ascii_digit;
- u32 valid_digits = 1;
- u64 return_value = 0;
-
- /* Main loop: convert each ASCII byte in the input string */
+ u64 converted_integer = 0;
+ u32 base = 10; /* Default is decimal */
- while (*string) {
+ ACPI_FUNCTION_TRACE_STR(ut_explicit_strtoul64, string);
- /* Check for overflow (32 or 64 bit) - return current converted value */
-
- if ((valid_digits > 16) ||
- ((valid_digits > 8) && (flags & ACPI_STRTOUL_32BIT))) {
- goto exit;
- }
-
- ascii_digit = *string;
- if (!isxdigit(ascii_digit)) {
-
- /* Not Hex ASCII A-F, a-f, or 0-9, terminate */
-
- goto exit;
- }
+ if (!acpi_ut_remove_whitespace(&string)) {
+ return_VALUE(0);
+ }
- /* Convert and insert the hex digit */
+ /*
+ * Only Hex and Decimal are supported, as per the ACPI specification.
+ * A "0x" prefix indicates hex; otherwise decimal is assumed.
+ */
+ if (acpi_ut_detect_hex_prefix(&string)) {
+ base = 16;
+ }
- acpi_ut_short_shift_left(return_value, 4, &return_value);
- return_value |= acpi_ut_ascii_char_to_hex(ascii_digit);
+ if (!acpi_ut_remove_leading_zeros(&string)) {
+ return_VALUE(0);
+ }
- string++;
- valid_digits++;
+ /*
+ * Ignore overflow as per the ACPI specification. This is implemented by
+ * ignoring the return status from the conversion functions called below.
+ * On overflow, the input string is simply truncated.
+ */
+ switch (base) {
+ case 10:
+ default:
+ acpi_ut_convert_decimal_string(string, &converted_integer);
+ break;
+
+ case 16:
+ acpi_ut_convert_hex_string(string, &converted_integer);
+ break;
}
-exit:
- return (return_value);
+ return_VALUE(converted_integer);
}
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 2c462beee551..6742f6c68034 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -1061,7 +1061,7 @@ static int erst_writer(struct pstore_record *record)
rcd->hdr.error_severity = CPER_SEV_FATAL;
/* timestamp valid. platform_id, partition_id are invalid */
rcd->hdr.validation_bits = CPER_VALID_TIMESTAMP;
- rcd->hdr.timestamp = get_seconds();
+ rcd->hdr.timestamp = ktime_get_real_seconds();
rcd->hdr.record_length = sizeof(*rcd) + record->size;
rcd->hdr.creator_id = CPER_CREATOR_PSTORE;
rcd->hdr.notification_type = CPER_NOTIFY_MCE;
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 3c3a37b8503b..f14695e744d0 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -51,6 +51,7 @@
#include <acpi/actbl1.h>
#include <acpi/ghes.h>
#include <acpi/apei.h>
+#include <asm/fixmap.h>
#include <asm/tlbflush.h>
#include <ras/ras_event.h>
@@ -112,22 +113,10 @@ static DEFINE_MUTEX(ghes_list_mutex);
* Because the memory area used to transfer hardware error information
* from BIOS to Linux can be determined only in NMI, IRQ or timer
* handler, but general ioremap can not be used in atomic context, so
- * a special version of atomic ioremap is implemented for that.
- */
-
-/*
- * Two virtual pages are used, one for IRQ/PROCESS context, the other for
- * NMI context (optionally).
- */
-#define GHES_IOREMAP_PAGES 2
-#define GHES_IOREMAP_IRQ_PAGE(base) (base)
-#define GHES_IOREMAP_NMI_PAGE(base) ((base) + PAGE_SIZE)
-
-/* virtual memory area for atomic ioremap */
-static struct vm_struct *ghes_ioremap_area;
-/*
- * These 2 spinlock is used to prevent atomic ioremap virtual memory
- * area from being mapped simultaneously.
+ * the fixmap is used instead.
+ *
+ * These 2 spinlocks are used to prevent the fixmap entries from being used
+ * simultaneously.
*/
static DEFINE_RAW_SPINLOCK(ghes_ioremap_lock_nmi);
static DEFINE_SPINLOCK(ghes_ioremap_lock_irq);
@@ -140,71 +129,38 @@ static atomic_t ghes_estatus_cache_alloced;
static int ghes_panic_timeout __read_mostly = 30;
-static int ghes_ioremap_init(void)
-{
- ghes_ioremap_area = __get_vm_area(PAGE_SIZE * GHES_IOREMAP_PAGES,
- VM_IOREMAP, VMALLOC_START, VMALLOC_END);
- if (!ghes_ioremap_area) {
- pr_err(GHES_PFX "Failed to allocate virtual memory area for atomic ioremap.\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static void ghes_ioremap_exit(void)
-{
- free_vm_area(ghes_ioremap_area);
-}
-
static void __iomem *ghes_ioremap_pfn_nmi(u64 pfn)
{
- unsigned long vaddr;
phys_addr_t paddr;
pgprot_t prot;
- vaddr = (unsigned long)GHES_IOREMAP_NMI_PAGE(ghes_ioremap_area->addr);
-
paddr = pfn << PAGE_SHIFT;
prot = arch_apei_get_mem_attribute(paddr);
- ioremap_page_range(vaddr, vaddr + PAGE_SIZE, paddr, prot);
+ __set_fixmap(FIX_APEI_GHES_NMI, paddr, prot);
- return (void __iomem *)vaddr;
+ return (void __iomem *) fix_to_virt(FIX_APEI_GHES_NMI);
}
static void __iomem *ghes_ioremap_pfn_irq(u64 pfn)
{
- unsigned long vaddr, paddr;
+ phys_addr_t paddr;
pgprot_t prot;
- vaddr = (unsigned long)GHES_IOREMAP_IRQ_PAGE(ghes_ioremap_area->addr);
-
paddr = pfn << PAGE_SHIFT;
prot = arch_apei_get_mem_attribute(paddr);
+ __set_fixmap(FIX_APEI_GHES_IRQ, paddr, prot);
- ioremap_page_range(vaddr, vaddr + PAGE_SIZE, paddr, prot);
-
- return (void __iomem *)vaddr;
+ return (void __iomem *) fix_to_virt(FIX_APEI_GHES_IRQ);
}
-static void ghes_iounmap_nmi(void __iomem *vaddr_ptr)
+static void ghes_iounmap_nmi(void)
{
- unsigned long vaddr = (unsigned long __force)vaddr_ptr;
- void *base = ghes_ioremap_area->addr;
-
- BUG_ON(vaddr != (unsigned long)GHES_IOREMAP_NMI_PAGE(base));
- unmap_kernel_range_noflush(vaddr, PAGE_SIZE);
- arch_apei_flush_tlb_one(vaddr);
+ clear_fixmap(FIX_APEI_GHES_NMI);
}
-static void ghes_iounmap_irq(void __iomem *vaddr_ptr)
+static void ghes_iounmap_irq(void)
{
- unsigned long vaddr = (unsigned long __force)vaddr_ptr;
- void *base = ghes_ioremap_area->addr;
-
- BUG_ON(vaddr != (unsigned long)GHES_IOREMAP_IRQ_PAGE(base));
- unmap_kernel_range_noflush(vaddr, PAGE_SIZE);
- arch_apei_flush_tlb_one(vaddr);
+ clear_fixmap(FIX_APEI_GHES_IRQ);
}
static int ghes_estatus_pool_init(void)
@@ -360,10 +316,10 @@ static void ghes_copy_tofrom_phys(void *buffer, u64 paddr, u32 len,
paddr += trunk;
buffer += trunk;
if (in_nmi) {
- ghes_iounmap_nmi(vaddr);
+ ghes_iounmap_nmi();
raw_spin_unlock(&ghes_ioremap_lock_nmi);
} else {
- ghes_iounmap_irq(vaddr);
+ ghes_iounmap_irq();
spin_unlock_irqrestore(&ghes_ioremap_lock_irq, flags);
}
}
@@ -851,17 +807,8 @@ static void ghes_sea_remove(struct ghes *ghes)
synchronize_rcu();
}
#else /* CONFIG_ACPI_APEI_SEA */
-static inline void ghes_sea_add(struct ghes *ghes)
-{
- pr_err(GHES_PFX "ID: %d, trying to add SEA notification which is not supported\n",
- ghes->generic->header.source_id);
-}
-
-static inline void ghes_sea_remove(struct ghes *ghes)
-{
- pr_err(GHES_PFX "ID: %d, trying to remove SEA notification which is not supported\n",
- ghes->generic->header.source_id);
-}
+static inline void ghes_sea_add(struct ghes *ghes) { }
+static inline void ghes_sea_remove(struct ghes *ghes) { }
#endif /* CONFIG_ACPI_APEI_SEA */
#ifdef CONFIG_HAVE_ACPI_APEI_NMI
@@ -1063,23 +1010,9 @@ static void ghes_nmi_init_cxt(void)
init_irq_work(&ghes_proc_irq_work, ghes_proc_in_irq);
}
#else /* CONFIG_HAVE_ACPI_APEI_NMI */
-static inline void ghes_nmi_add(struct ghes *ghes)
-{
- pr_err(GHES_PFX "ID: %d, trying to add NMI notification which is not supported!\n",
- ghes->generic->header.source_id);
- BUG();
-}
-
-static inline void ghes_nmi_remove(struct ghes *ghes)
-{
- pr_err(GHES_PFX "ID: %d, trying to remove NMI notification which is not supported!\n",
- ghes->generic->header.source_id);
- BUG();
-}
-
-static inline void ghes_nmi_init_cxt(void)
-{
-}
+static inline void ghes_nmi_add(struct ghes *ghes) { }
+static inline void ghes_nmi_remove(struct ghes *ghes) { }
+static inline void ghes_nmi_init_cxt(void) { }
#endif /* CONFIG_HAVE_ACPI_APEI_NMI */
static int ghes_probe(struct platform_device *ghes_dev)
@@ -1285,13 +1218,9 @@ static int __init ghes_init(void)
ghes_nmi_init_cxt();
- rc = ghes_ioremap_init();
- if (rc)
- goto err;
-
rc = ghes_estatus_pool_init();
if (rc)
- goto err_ioremap_exit;
+ goto err;
rc = ghes_estatus_pool_expand(GHES_ESTATUS_CACHE_AVG_SIZE *
GHES_ESTATUS_CACHE_ALLOCED_MAX);
@@ -1315,8 +1244,6 @@ static int __init ghes_init(void)
return 0;
err_pool_exit:
ghes_estatus_pool_exit();
-err_ioremap_exit:
- ghes_ioremap_exit();
err:
return rc;
}
diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index e5b47f032d9a..21c28433c590 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -48,7 +48,6 @@
struct cppc_pcc_data {
struct mbox_chan *pcc_channel;
void __iomem *pcc_comm_addr;
- int pcc_subspace_idx;
bool pcc_channel_acquired;
ktime_t deadline;
unsigned int pcc_mpar, pcc_mrtt, pcc_nominal;
@@ -75,13 +74,16 @@ struct cppc_pcc_data {
/* Wait queue for CPUs whose requests were batched */
wait_queue_head_t pcc_write_wait_q;
+ ktime_t last_cmd_cmpl_time;
+ ktime_t last_mpar_reset;
+ int mpar_count;
+ int refcount;
};
-/* Structure to represent the single PCC channel */
-static struct cppc_pcc_data pcc_data = {
- .pcc_subspace_idx = -1,
- .platform_owns_pcc = true,
-};
+/* Array to represent the PCC channel per subspace id */
+static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES];
+/* The cpu_pcc_subspace_idx containsper CPU subspace id */
+static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx);
/*
* The cpc_desc structure contains the ACPI register details
@@ -93,7 +95,8 @@ static struct cppc_pcc_data pcc_data = {
static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
/* pcc mapped address + header size + offset within PCC subspace */
-#define GET_PCC_VADDR(offs) (pcc_data.pcc_comm_addr + 0x8 + (offs))
+#define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_comm_addr + \
+ 0x8 + (offs))
/* Check if a CPC register is in PCC */
#define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
@@ -188,13 +191,16 @@ static struct kobj_type cppc_ktype = {
.default_attrs = cppc_attrs,
};
-static int check_pcc_chan(bool chk_err_bit)
+static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit)
{
int ret = -EIO, status = 0;
- struct acpi_pcct_shared_memory __iomem *generic_comm_base = pcc_data.pcc_comm_addr;
- ktime_t next_deadline = ktime_add(ktime_get(), pcc_data.deadline);
+ struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
+ struct acpi_pcct_shared_memory __iomem *generic_comm_base =
+ pcc_ss_data->pcc_comm_addr;
+ ktime_t next_deadline = ktime_add(ktime_get(),
+ pcc_ss_data->deadline);
- if (!pcc_data.platform_owns_pcc)
+ if (!pcc_ss_data->platform_owns_pcc)
return 0;
/* Retry in case the remote processor was too slow to catch up. */
@@ -219,7 +225,7 @@ static int check_pcc_chan(bool chk_err_bit)
}
if (likely(!ret))
- pcc_data.platform_owns_pcc = false;
+ pcc_ss_data->platform_owns_pcc = false;
else
pr_err("PCC check channel failed. Status=%x\n", status);
@@ -230,13 +236,12 @@ static int check_pcc_chan(bool chk_err_bit)
* This function transfers the ownership of the PCC to the platform
* So it must be called while holding write_lock(pcc_lock)
*/
-static int send_pcc_cmd(u16 cmd)
+static int send_pcc_cmd(int pcc_ss_id, u16 cmd)
{
int ret = -EIO, i;
+ struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
struct acpi_pcct_shared_memory *generic_comm_base =
- (struct acpi_pcct_shared_memory *) pcc_data.pcc_comm_addr;
- static ktime_t last_cmd_cmpl_time, last_mpar_reset;
- static int mpar_count;
+ (struct acpi_pcct_shared_memory *)pcc_ss_data->pcc_comm_addr;
unsigned int time_delta;
/*
@@ -249,24 +254,25 @@ static int send_pcc_cmd(u16 cmd)
* before write completion, so first send a WRITE command to
* platform
*/
- if (pcc_data.pending_pcc_write_cmd)
- send_pcc_cmd(CMD_WRITE);
+ if (pcc_ss_data->pending_pcc_write_cmd)
+ send_pcc_cmd(pcc_ss_id, CMD_WRITE);
- ret = check_pcc_chan(false);
+ ret = check_pcc_chan(pcc_ss_id, false);
if (ret)
goto end;
} else /* CMD_WRITE */
- pcc_data.pending_pcc_write_cmd = FALSE;
+ pcc_ss_data->pending_pcc_write_cmd = FALSE;
/*
* Handle the Minimum Request Turnaround Time(MRTT)
* "The minimum amount of time that OSPM must wait after the completion
* of a command before issuing the next command, in microseconds"
*/
- if (pcc_data.pcc_mrtt) {
- time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time);
- if (pcc_data.pcc_mrtt > time_delta)
- udelay(pcc_data.pcc_mrtt - time_delta);
+ if (pcc_ss_data->pcc_mrtt) {
+ time_delta = ktime_us_delta(ktime_get(),
+ pcc_ss_data->last_cmd_cmpl_time);
+ if (pcc_ss_data->pcc_mrtt > time_delta)
+ udelay(pcc_ss_data->pcc_mrtt - time_delta);
}
/*
@@ -280,18 +286,19 @@ static int send_pcc_cmd(u16 cmd)
* not send the request to the platform after hitting the MPAR limit in
* any 60s window
*/
- if (pcc_data.pcc_mpar) {
- if (mpar_count == 0) {
- time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset);
- if (time_delta < 60 * MSEC_PER_SEC) {
+ if (pcc_ss_data->pcc_mpar) {
+ if (pcc_ss_data->mpar_count == 0) {
+ time_delta = ktime_ms_delta(ktime_get(),
+ pcc_ss_data->last_mpar_reset);
+ if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) {
pr_debug("PCC cmd not sent due to MPAR limit");
ret = -EIO;
goto end;
}
- last_mpar_reset = ktime_get();
- mpar_count = pcc_data.pcc_mpar;
+ pcc_ss_data->last_mpar_reset = ktime_get();
+ pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar;
}
- mpar_count--;
+ pcc_ss_data->mpar_count--;
}
/* Write to the shared comm region. */
@@ -300,10 +307,10 @@ static int send_pcc_cmd(u16 cmd)
/* Flip CMD COMPLETE bit */
writew_relaxed(0, &generic_comm_base->status);
- pcc_data.platform_owns_pcc = true;
+ pcc_ss_data->platform_owns_pcc = true;
/* Ring doorbell */
- ret = mbox_send_message(pcc_data.pcc_channel, &cmd);
+ ret = mbox_send_message(pcc_ss_data->pcc_channel, &cmd);
if (ret < 0) {
pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n",
cmd, ret);
@@ -311,15 +318,15 @@ static int send_pcc_cmd(u16 cmd)
}
/* wait for completion and check for PCC errro bit */
- ret = check_pcc_chan(true);
+ ret = check_pcc_chan(pcc_ss_id, true);
- if (pcc_data.pcc_mrtt)
- last_cmd_cmpl_time = ktime_get();
+ if (pcc_ss_data->pcc_mrtt)
+ pcc_ss_data->last_cmd_cmpl_time = ktime_get();
- if (pcc_data.pcc_channel->mbox->txdone_irq)
- mbox_chan_txdone(pcc_data.pcc_channel, ret);
+ if (pcc_ss_data->pcc_channel->mbox->txdone_irq)
+ mbox_chan_txdone(pcc_ss_data->pcc_channel, ret);
else
- mbox_client_txdone(pcc_data.pcc_channel, ret);
+ mbox_client_txdone(pcc_ss_data->pcc_channel, ret);
end:
if (cmd == CMD_WRITE) {
@@ -329,12 +336,12 @@ end:
if (!desc)
continue;
- if (desc->write_cmd_id == pcc_data.pcc_write_cnt)
+ if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt)
desc->write_cmd_status = ret;
}
}
- pcc_data.pcc_write_cnt++;
- wake_up_all(&pcc_data.pcc_write_wait_q);
+ pcc_ss_data->pcc_write_cnt++;
+ wake_up_all(&pcc_ss_data->pcc_write_wait_q);
}
return ret;
@@ -536,16 +543,16 @@ err_ret:
}
EXPORT_SYMBOL_GPL(acpi_get_psd_map);
-static int register_pcc_channel(int pcc_subspace_idx)
+static int register_pcc_channel(int pcc_ss_idx)
{
struct acpi_pcct_hw_reduced *cppc_ss;
u64 usecs_lat;
- if (pcc_subspace_idx >= 0) {
- pcc_data.pcc_channel = pcc_mbox_request_channel(&cppc_mbox_cl,
- pcc_subspace_idx);
+ if (pcc_ss_idx >= 0) {
+ pcc_data[pcc_ss_idx]->pcc_channel =
+ pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx);
- if (IS_ERR(pcc_data.pcc_channel)) {
+ if (IS_ERR(pcc_data[pcc_ss_idx]->pcc_channel)) {
pr_err("Failed to find PCC communication channel\n");
return -ENODEV;
}
@@ -556,7 +563,7 @@ static int register_pcc_channel(int pcc_subspace_idx)
* PCC channels) and stored pointers to the
* subspace communication region in con_priv.
*/
- cppc_ss = (pcc_data.pcc_channel)->con_priv;
+ cppc_ss = (pcc_data[pcc_ss_idx]->pcc_channel)->con_priv;
if (!cppc_ss) {
pr_err("No PCC subspace found for CPPC\n");
@@ -569,19 +576,20 @@ static int register_pcc_channel(int pcc_subspace_idx)
* So add an arbitrary amount of wait on top of Nominal.
*/
usecs_lat = NUM_RETRIES * cppc_ss->latency;
- pcc_data.deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC);
- pcc_data.pcc_mrtt = cppc_ss->min_turnaround_time;
- pcc_data.pcc_mpar = cppc_ss->max_access_rate;
- pcc_data.pcc_nominal = cppc_ss->latency;
-
- pcc_data.pcc_comm_addr = acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length);
- if (!pcc_data.pcc_comm_addr) {
+ pcc_data[pcc_ss_idx]->deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC);
+ pcc_data[pcc_ss_idx]->pcc_mrtt = cppc_ss->min_turnaround_time;
+ pcc_data[pcc_ss_idx]->pcc_mpar = cppc_ss->max_access_rate;
+ pcc_data[pcc_ss_idx]->pcc_nominal = cppc_ss->latency;
+
+ pcc_data[pcc_ss_idx]->pcc_comm_addr =
+ acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length);
+ if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) {
pr_err("Failed to ioremap PCC comm region mem\n");
return -ENOMEM;
}
/* Set flag so that we dont come here for each CPU. */
- pcc_data.pcc_channel_acquired = true;
+ pcc_data[pcc_ss_idx]->pcc_channel_acquired = true;
}
return 0;
@@ -600,6 +608,34 @@ bool __weak cpc_ffh_supported(void)
return false;
}
+
+/**
+ * pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace
+ *
+ * Check and allocate the cppc_pcc_data memory.
+ * In some processor configurations it is possible that same subspace
+ * is shared between multiple CPU's. This is seen especially in CPU's
+ * with hardware multi-threading support.
+ *
+ * Return: 0 for success, errno for failure
+ */
+int pcc_data_alloc(int pcc_ss_id)
+{
+ if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES)
+ return -EINVAL;
+
+ if (pcc_data[pcc_ss_id]) {
+ pcc_data[pcc_ss_id]->refcount++;
+ } else {
+ pcc_data[pcc_ss_id] = kzalloc(sizeof(struct cppc_pcc_data),
+ GFP_KERNEL);
+ if (!pcc_data[pcc_ss_id])
+ return -ENOMEM;
+ pcc_data[pcc_ss_id]->refcount++;
+ }
+
+ return 0;
+}
/*
* An example CPC table looks like the following.
*
@@ -661,6 +697,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr)
struct device *cpu_dev;
acpi_handle handle = pr->handle;
unsigned int num_ent, i, cpc_rev;
+ int pcc_subspace_id = -1;
acpi_status status;
int ret = -EFAULT;
@@ -733,9 +770,11 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr)
* so extract it only once.
*/
if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
- if (pcc_data.pcc_subspace_idx < 0)
- pcc_data.pcc_subspace_idx = gas_t->access_width;
- else if (pcc_data.pcc_subspace_idx != gas_t->access_width) {
+ if (pcc_subspace_id < 0) {
+ pcc_subspace_id = gas_t->access_width;
+ if (pcc_data_alloc(pcc_subspace_id))
+ goto out_free;
+ } else if (pcc_subspace_id != gas_t->access_width) {
pr_debug("Mismatched PCC ids.\n");
goto out_free;
}
@@ -763,6 +802,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr)
goto out_free;
}
}
+ per_cpu(cpu_pcc_subspace_idx, pr->id) = pcc_subspace_id;
/* Store CPU Logical ID */
cpc_ptr->cpu_id = pr->id;
@@ -771,14 +811,14 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr)
if (ret)
goto out_free;
- /* Register PCC channel once for all CPUs. */
- if (!pcc_data.pcc_channel_acquired) {
- ret = register_pcc_channel(pcc_data.pcc_subspace_idx);
+ /* Register PCC channel once for all PCC subspace id. */
+ if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) {
+ ret = register_pcc_channel(pcc_subspace_id);
if (ret)
goto out_free;
- init_rwsem(&pcc_data.pcc_lock);
- init_waitqueue_head(&pcc_data.pcc_write_wait_q);
+ init_rwsem(&pcc_data[pcc_subspace_id]->pcc_lock);
+ init_waitqueue_head(&pcc_data[pcc_subspace_id]->pcc_write_wait_q);
}
/* Everything looks okay */
@@ -831,6 +871,18 @@ void acpi_cppc_processor_exit(struct acpi_processor *pr)
struct cpc_desc *cpc_ptr;
unsigned int i;
void __iomem *addr;
+ int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, pr->id);
+
+ if (pcc_ss_id >=0 && pcc_data[pcc_ss_id]) {
+ if (pcc_data[pcc_ss_id]->pcc_channel_acquired) {
+ pcc_data[pcc_ss_id]->refcount--;
+ if (!pcc_data[pcc_ss_id]->refcount) {
+ pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel);
+ pcc_data[pcc_ss_id]->pcc_channel_acquired = 0;
+ kfree(pcc_data[pcc_ss_id]);
+ }
+ }
+ }
cpc_ptr = per_cpu(cpc_desc_ptr, pr->id);
if (!cpc_ptr)
@@ -888,6 +940,7 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
{
int ret_val = 0;
void __iomem *vaddr = 0;
+ int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_reg *reg = &reg_res->cpc_entry.reg;
if (reg_res->type == ACPI_TYPE_INTEGER) {
@@ -897,7 +950,7 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
*val = 0;
if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM)
- vaddr = GET_PCC_VADDR(reg->address);
+ vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
vaddr = reg_res->sys_mem_vaddr;
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
@@ -932,10 +985,11 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
{
int ret_val = 0;
void __iomem *vaddr = 0;
+ int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_reg *reg = &reg_res->cpc_entry.reg;
if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM)
- vaddr = GET_PCC_VADDR(reg->address);
+ vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
vaddr = reg_res->sys_mem_vaddr;
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
@@ -980,6 +1034,8 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
struct cpc_register_resource *highest_reg, *lowest_reg,
*lowest_non_linear_reg, *nominal_reg;
u64 high, low, nom, min_nonlinear;
+ int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
+ struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
int ret = 0, regs_in_pcc = 0;
if (!cpc_desc) {
@@ -996,9 +1052,9 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) ||
CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg)) {
regs_in_pcc = 1;
- down_write(&pcc_data.pcc_lock);
+ down_write(&pcc_ss_data->pcc_lock);
/* Ring doorbell once to update PCC subspace */
- if (send_pcc_cmd(CMD_READ) < 0) {
+ if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
ret = -EIO;
goto out_err;
}
@@ -1021,7 +1077,7 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
out_err:
if (regs_in_pcc)
- up_write(&pcc_data.pcc_lock);
+ up_write(&pcc_ss_data->pcc_lock);
return ret;
}
EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
@@ -1038,6 +1094,8 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *delivered_reg, *reference_reg,
*ref_perf_reg, *ctr_wrap_reg;
+ int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
+ struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
u64 delivered, reference, ref_perf, ctr_wrap_time;
int ret = 0, regs_in_pcc = 0;
@@ -1061,10 +1119,10 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
/* Are any of the regs PCC ?*/
if (CPC_IN_PCC(delivered_reg) || CPC_IN_PCC(reference_reg) ||
CPC_IN_PCC(ctr_wrap_reg) || CPC_IN_PCC(ref_perf_reg)) {
- down_write(&pcc_data.pcc_lock);
+ down_write(&pcc_ss_data->pcc_lock);
regs_in_pcc = 1;
/* Ring doorbell once to update PCC subspace */
- if (send_pcc_cmd(CMD_READ) < 0) {
+ if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
ret = -EIO;
goto out_err;
}
@@ -1094,7 +1152,7 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
perf_fb_ctrs->wraparound_time = ctr_wrap_time;
out_err:
if (regs_in_pcc)
- up_write(&pcc_data.pcc_lock);
+ up_write(&pcc_ss_data->pcc_lock);
return ret;
}
EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
@@ -1110,6 +1168,8 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
struct cpc_register_resource *desired_reg;
+ int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
+ struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
int ret = 0;
if (!cpc_desc) {
@@ -1127,11 +1187,11 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
* achieve that goal here
*/
if (CPC_IN_PCC(desired_reg)) {
- down_read(&pcc_data.pcc_lock); /* BEGIN Phase-I */
- if (pcc_data.platform_owns_pcc) {
- ret = check_pcc_chan(false);
+ down_read(&pcc_ss_data->pcc_lock); /* BEGIN Phase-I */
+ if (pcc_ss_data->platform_owns_pcc) {
+ ret = check_pcc_chan(pcc_ss_id, false);
if (ret) {
- up_read(&pcc_data.pcc_lock);
+ up_read(&pcc_ss_data->pcc_lock);
return ret;
}
}
@@ -1139,8 +1199,8 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
* Update the pending_write to make sure a PCC CMD_READ will not
* arrive and steal the channel during the switch to write lock
*/
- pcc_data.pending_pcc_write_cmd = true;
- cpc_desc->write_cmd_id = pcc_data.pcc_write_cnt;
+ pcc_ss_data->pending_pcc_write_cmd = true;
+ cpc_desc->write_cmd_id = pcc_ss_data->pcc_write_cnt;
cpc_desc->write_cmd_status = 0;
}
@@ -1151,7 +1211,7 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
cpc_write(cpu, desired_reg, perf_ctrls->desired_perf);
if (CPC_IN_PCC(desired_reg))
- up_read(&pcc_data.pcc_lock); /* END Phase-I */
+ up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */
/*
* This is Phase-II where we transfer the ownership of PCC to Platform
*
@@ -1199,15 +1259,15 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
* the write command before servicing the read command
*/
if (CPC_IN_PCC(desired_reg)) {
- if (down_write_trylock(&pcc_data.pcc_lock)) { /* BEGIN Phase-II */
+ if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */
/* Update only if there are pending write commands */
- if (pcc_data.pending_pcc_write_cmd)
- send_pcc_cmd(CMD_WRITE);
- up_write(&pcc_data.pcc_lock); /* END Phase-II */
+ if (pcc_ss_data->pending_pcc_write_cmd)
+ send_pcc_cmd(pcc_ss_id, CMD_WRITE);
+ up_write(&pcc_ss_data->pcc_lock); /* END Phase-II */
} else
/* Wait until pcc_write_cnt is updated by send_pcc_cmd */
- wait_event(pcc_data.pcc_write_wait_q,
- cpc_desc->write_cmd_id != pcc_data.pcc_write_cnt);
+ wait_event(pcc_ss_data->pcc_write_wait_q,
+ cpc_desc->write_cmd_id != pcc_ss_data->pcc_write_cnt);
/* send_pcc_cmd updates the status in case of failure */
ret = cpc_desc->write_cmd_status;
@@ -1240,6 +1300,8 @@ unsigned int cppc_get_transition_latency(int cpu_num)
unsigned int latency_ns = 0;
struct cpc_desc *cpc_desc;
struct cpc_register_resource *desired_reg;
+ int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu_num);
+ struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
cpc_desc = per_cpu(cpc_desc_ptr, cpu_num);
if (!cpc_desc)
@@ -1249,11 +1311,11 @@ unsigned int cppc_get_transition_latency(int cpu_num)
if (!CPC_IN_PCC(desired_reg))
return CPUFREQ_ETERNAL;
- if (pcc_data.pcc_mpar)
- latency_ns = 60 * (1000 * 1000 * 1000 / pcc_data.pcc_mpar);
+ if (pcc_ss_data->pcc_mpar)
+ latency_ns = 60 * (1000 * 1000 * 1000 / pcc_ss_data->pcc_mpar);
- latency_ns = max(latency_ns, pcc_data.pcc_nominal * 1000);
- latency_ns = max(latency_ns, pcc_data.pcc_mrtt * 1000);
+ latency_ns = max(latency_ns, pcc_ss_data->pcc_nominal * 1000);
+ latency_ns = max(latency_ns, pcc_ss_data->pcc_mrtt * 1000);
return latency_ns;
}
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 2305e1ab978e..e3fc1f045e1c 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -482,6 +482,7 @@ int dock_notify(struct acpi_device *adev, u32 event)
surprise_removal = 1;
event = ACPI_NOTIFY_EJECT_REQUEST;
/* Fall back */
+ /* fall through */
case ACPI_NOTIFY_EJECT_REQUEST:
begin_undock(ds);
if ((immediate_undock && !(ds->flags & DOCK_IS_ATA))
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 236b14324780..82b3ce5e937e 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -486,8 +486,11 @@ static inline void __acpi_ec_enable_event(struct acpi_ec *ec)
{
if (!test_and_set_bit(EC_FLAGS_QUERY_ENABLED, &ec->flags))
ec_log_drv("event unblocked");
- if (!test_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
- advance_transaction(ec);
+ /*
+ * Unconditionally invoke this once after enabling the event
+ * handling mechanism to detect the pending events.
+ */
+ advance_transaction(ec);
}
static inline void __acpi_ec_disable_event(struct acpi_ec *ec)
@@ -1456,11 +1459,10 @@ static int ec_install_handlers(struct acpi_ec *ec, bool handle_events)
if (test_bit(EC_FLAGS_STARTED, &ec->flags) &&
ec->reference_count >= 1)
acpi_ec_enable_gpe(ec, true);
-
- /* EC is fully operational, allow queries */
- acpi_ec_enable_event(ec);
}
}
+ /* EC is fully operational, allow queries */
+ acpi_ec_enable_event(ec);
return 0;
}
diff --git a/drivers/acpi/pmic/tps68470_pmic.c b/drivers/acpi/pmic/tps68470_pmic.c
new file mode 100644
index 000000000000..7f3c567e8168
--- /dev/null
+++ b/drivers/acpi/pmic/tps68470_pmic.c
@@ -0,0 +1,455 @@
+/*
+ * TI TPS68470 PMIC operation region driver
+ *
+ * Copyright (C) 2017 Intel Corporation. All rights reserved.
+ *
+ * Author: Rajmohan Mani <rajmohan.mani@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Based on drivers/acpi/pmic/intel_pmic* drivers
+ */
+
+#include <linux/acpi.h>
+#include <linux/mfd/tps68470.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct tps68470_pmic_table {
+ u32 address; /* operation region address */
+ u32 reg; /* corresponding register */
+ u32 bitmask; /* bit mask for power, clock */
+};
+
+#define TI_PMIC_POWER_OPREGION_ID 0xB0
+#define TI_PMIC_VR_VAL_OPREGION_ID 0xB1
+#define TI_PMIC_CLOCK_OPREGION_ID 0xB2
+#define TI_PMIC_CLKFREQ_OPREGION_ID 0xB3
+
+struct tps68470_pmic_opregion {
+ struct mutex lock;
+ struct regmap *regmap;
+};
+
+#define S_IO_I2C_EN (BIT(0) | BIT(1))
+
+static const struct tps68470_pmic_table power_table[] = {
+ {
+ .address = 0x00,
+ .reg = TPS68470_REG_S_I2C_CTL,
+ .bitmask = S_IO_I2C_EN,
+ /* S_I2C_CTL */
+ },
+ {
+ .address = 0x04,
+ .reg = TPS68470_REG_VCMCTL,
+ .bitmask = BIT(0),
+ /* VCMCTL */
+ },
+ {
+ .address = 0x08,
+ .reg = TPS68470_REG_VAUX1CTL,
+ .bitmask = BIT(0),
+ /* VAUX1_CTL */
+ },
+ {
+ .address = 0x0C,
+ .reg = TPS68470_REG_VAUX2CTL,
+ .bitmask = BIT(0),
+ /* VAUX2CTL */
+ },
+ {
+ .address = 0x10,
+ .reg = TPS68470_REG_VACTL,
+ .bitmask = BIT(0),
+ /* VACTL */
+ },
+ {
+ .address = 0x14,
+ .reg = TPS68470_REG_VDCTL,
+ .bitmask = BIT(0),
+ /* VDCTL */
+ },
+};
+
+/* Table to set voltage regulator value */
+static const struct tps68470_pmic_table vr_val_table[] = {
+ {
+ .address = 0x00,
+ .reg = TPS68470_REG_VSIOVAL,
+ .bitmask = TPS68470_VSIOVAL_IOVOLT_MASK,
+ /* TPS68470_REG_VSIOVAL */
+ },
+ {
+ .address = 0x04,
+ .reg = TPS68470_REG_VIOVAL,
+ .bitmask = TPS68470_VIOVAL_IOVOLT_MASK,
+ /* TPS68470_REG_VIOVAL */
+ },
+ {
+ .address = 0x08,
+ .reg = TPS68470_REG_VCMVAL,
+ .bitmask = TPS68470_VCMVAL_VCVOLT_MASK,
+ /* TPS68470_REG_VCMVAL */
+ },
+ {
+ .address = 0x0C,
+ .reg = TPS68470_REG_VAUX1VAL,
+ .bitmask = TPS68470_VAUX1VAL_AUX1VOLT_MASK,
+ /* TPS68470_REG_VAUX1VAL */
+ },
+ {
+ .address = 0x10,
+ .reg = TPS68470_REG_VAUX2VAL,
+ .bitmask = TPS68470_VAUX2VAL_AUX2VOLT_MASK,
+ /* TPS68470_REG_VAUX2VAL */
+ },
+ {
+ .address = 0x14,
+ .reg = TPS68470_REG_VAVAL,
+ .bitmask = TPS68470_VAVAL_AVOLT_MASK,
+ /* TPS68470_REG_VAVAL */
+ },
+ {
+ .address = 0x18,
+ .reg = TPS68470_REG_VDVAL,
+ .bitmask = TPS68470_VDVAL_DVOLT_MASK,
+ /* TPS68470_REG_VDVAL */
+ },
+};
+
+/* Table to configure clock frequency */
+static const struct tps68470_pmic_table clk_freq_table[] = {
+ {
+ .address = 0x00,
+ .reg = TPS68470_REG_POSTDIV2,
+ .bitmask = BIT(0) | BIT(1),
+ /* TPS68470_REG_POSTDIV2 */
+ },
+ {
+ .address = 0x04,
+ .reg = TPS68470_REG_BOOSTDIV,
+ .bitmask = 0x1F,
+ /* TPS68470_REG_BOOSTDIV */
+ },
+ {
+ .address = 0x08,
+ .reg = TPS68470_REG_BUCKDIV,
+ .bitmask = 0x0F,
+ /* TPS68470_REG_BUCKDIV */
+ },
+ {
+ .address = 0x0C,
+ .reg = TPS68470_REG_PLLSWR,
+ .bitmask = 0x13,
+ /* TPS68470_REG_PLLSWR */
+ },
+ {
+ .address = 0x10,
+ .reg = TPS68470_REG_XTALDIV,
+ .bitmask = 0xFF,
+ /* TPS68470_REG_XTALDIV */
+ },
+ {
+ .address = 0x14,
+ .reg = TPS68470_REG_PLLDIV,
+ .bitmask = 0xFF,
+ /* TPS68470_REG_PLLDIV */
+ },
+ {
+ .address = 0x18,
+ .reg = TPS68470_REG_POSTDIV,
+ .bitmask = 0x83,
+ /* TPS68470_REG_POSTDIV */
+ },
+};
+
+/* Table to configure and enable clocks */
+static const struct tps68470_pmic_table clk_table[] = {
+ {
+ .address = 0x00,
+ .reg = TPS68470_REG_PLLCTL,
+ .bitmask = 0xF5,
+ /* TPS68470_REG_PLLCTL */
+ },
+ {
+ .address = 0x04,
+ .reg = TPS68470_REG_PLLCTL2,
+ .bitmask = BIT(0),
+ /* TPS68470_REG_PLLCTL2 */
+ },
+ {
+ .address = 0x08,
+ .reg = TPS68470_REG_CLKCFG1,
+ .bitmask = TPS68470_CLKCFG1_MODE_A_MASK |
+ TPS68470_CLKCFG1_MODE_B_MASK,
+ /* TPS68470_REG_CLKCFG1 */
+ },
+ {
+ .address = 0x0C,
+ .reg = TPS68470_REG_CLKCFG2,
+ .bitmask = TPS68470_CLKCFG1_MODE_A_MASK |
+ TPS68470_CLKCFG1_MODE_B_MASK,
+ /* TPS68470_REG_CLKCFG2 */
+ },
+};
+
+static int pmic_get_reg_bit(u64 address,
+ const struct tps68470_pmic_table *table,
+ const unsigned int table_size, int *reg,
+ int *bitmask)
+{
+ u64 i;
+
+ i = address / 4;
+ if (i >= table_size)
+ return -ENOENT;
+
+ if (!reg || !bitmask)
+ return -EINVAL;
+
+ *reg = table[i].reg;
+ *bitmask = table[i].bitmask;
+
+ return 0;
+}
+
+static int tps68470_pmic_get_power(struct regmap *regmap, int reg,
+ int bitmask, u64 *value)
+{
+ unsigned int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = (data & bitmask) ? 1 : 0;
+ return 0;
+}
+
+static int tps68470_pmic_get_vr_val(struct regmap *regmap, int reg,
+ int bitmask, u64 *value)
+{
+ unsigned int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = data & bitmask;
+ return 0;
+}
+
+static int tps68470_pmic_get_clk(struct regmap *regmap, int reg,
+ int bitmask, u64 *value)
+{
+ unsigned int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = (data & bitmask) ? 1 : 0;
+ return 0;
+}
+
+static int tps68470_pmic_get_clk_freq(struct regmap *regmap, int reg,
+ int bitmask, u64 *value)
+{
+ unsigned int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = data & bitmask;
+ return 0;
+}
+
+static int ti_tps68470_regmap_update_bits(struct regmap *regmap, int reg,
+ int bitmask, u64 value)
+{
+ return regmap_update_bits(regmap, reg, bitmask, value);
+}
+
+static acpi_status tps68470_pmic_common_handler(u32 function,
+ acpi_physical_address address,
+ u32 bits, u64 *value,
+ void *region_context,
+ int (*get)(struct regmap *,
+ int, int, u64 *),
+ int (*update)(struct regmap *,
+ int, int, u64),
+ const struct tps68470_pmic_table *tbl,
+ unsigned int tbl_size)
+{
+ struct tps68470_pmic_opregion *opregion = region_context;
+ struct regmap *regmap = opregion->regmap;
+ int reg, ret, bitmask;
+
+ if (bits != 32)
+ return AE_BAD_PARAMETER;
+
+ ret = pmic_get_reg_bit(address, tbl, tbl_size, &reg, &bitmask);
+ if (ret < 0)
+ return AE_BAD_PARAMETER;
+
+ if (function == ACPI_WRITE && *value > bitmask)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&opregion->lock);
+
+ ret = (function == ACPI_READ) ?
+ get(regmap, reg, bitmask, value) :
+ update(regmap, reg, bitmask, *value);
+
+ mutex_unlock(&opregion->lock);
+
+ return ret ? AE_ERROR : AE_OK;
+}
+
+static acpi_status tps68470_pmic_cfreq_handler(u32 function,
+ acpi_physical_address address,
+ u32 bits, u64 *value,
+ void *handler_context,
+ void *region_context)
+{
+ return tps68470_pmic_common_handler(function, address, bits, value,
+ region_context,
+ tps68470_pmic_get_clk_freq,
+ ti_tps68470_regmap_update_bits,
+ clk_freq_table,
+ ARRAY_SIZE(clk_freq_table));
+}
+
+static acpi_status tps68470_pmic_clk_handler(u32 function,
+ acpi_physical_address address, u32 bits,
+ u64 *value, void *handler_context,
+ void *region_context)
+{
+ return tps68470_pmic_common_handler(function, address, bits, value,
+ region_context,
+ tps68470_pmic_get_clk,
+ ti_tps68470_regmap_update_bits,
+ clk_table,
+ ARRAY_SIZE(clk_table));
+}
+
+static acpi_status tps68470_pmic_vrval_handler(u32 function,
+ acpi_physical_address address,
+ u32 bits, u64 *value,
+ void *handler_context,
+ void *region_context)
+{
+ return tps68470_pmic_common_handler(function, address, bits, value,
+ region_context,
+ tps68470_pmic_get_vr_val,
+ ti_tps68470_regmap_update_bits,
+ vr_val_table,
+ ARRAY_SIZE(vr_val_table));
+}
+
+static acpi_status tps68470_pmic_pwr_handler(u32 function,
+ acpi_physical_address address,
+ u32 bits, u64 *value,
+ void *handler_context,
+ void *region_context)
+{
+ if (bits != 32)
+ return AE_BAD_PARAMETER;
+
+ /* set/clear for bit 0, bits 0 and 1 together */
+ if (function == ACPI_WRITE &&
+ !(*value == 0 || *value == 1 || *value == 3)) {
+ return AE_BAD_PARAMETER;
+ }
+
+ return tps68470_pmic_common_handler(function, address, bits, value,
+ region_context,
+ tps68470_pmic_get_power,
+ ti_tps68470_regmap_update_bits,
+ power_table,
+ ARRAY_SIZE(power_table));
+}
+
+static int tps68470_pmic_opregion_probe(struct platform_device *pdev)
+{
+ struct regmap *tps68470_regmap = dev_get_drvdata(pdev->dev.parent);
+ acpi_handle handle = ACPI_HANDLE(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct tps68470_pmic_opregion *opregion;
+ acpi_status status;
+
+ if (!dev || !tps68470_regmap) {
+ dev_warn(dev, "dev or regmap is NULL\n");
+ return -EINVAL;
+ }
+
+ if (!handle) {
+ dev_warn(dev, "acpi handle is NULL\n");
+ return -ENODEV;
+ }
+
+ opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
+ if (!opregion)
+ return -ENOMEM;
+
+ mutex_init(&opregion->lock);
+ opregion->regmap = tps68470_regmap;
+
+ status = acpi_install_address_space_handler(handle,
+ TI_PMIC_POWER_OPREGION_ID,
+ tps68470_pmic_pwr_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status))
+ goto out_mutex_destroy;
+
+ status = acpi_install_address_space_handler(handle,
+ TI_PMIC_VR_VAL_OPREGION_ID,
+ tps68470_pmic_vrval_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status))
+ goto out_remove_power_handler;
+
+ status = acpi_install_address_space_handler(handle,
+ TI_PMIC_CLOCK_OPREGION_ID,
+ tps68470_pmic_clk_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status))
+ goto out_remove_vr_val_handler;
+
+ status = acpi_install_address_space_handler(handle,
+ TI_PMIC_CLKFREQ_OPREGION_ID,
+ tps68470_pmic_cfreq_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status))
+ goto out_remove_clk_handler;
+
+ return 0;
+
+out_remove_clk_handler:
+ acpi_remove_address_space_handler(handle, TI_PMIC_CLOCK_OPREGION_ID,
+ tps68470_pmic_clk_handler);
+out_remove_vr_val_handler:
+ acpi_remove_address_space_handler(handle, TI_PMIC_VR_VAL_OPREGION_ID,
+ tps68470_pmic_vrval_handler);
+out_remove_power_handler:
+ acpi_remove_address_space_handler(handle, TI_PMIC_POWER_OPREGION_ID,
+ tps68470_pmic_pwr_handler);
+out_mutex_destroy:
+ mutex_destroy(&opregion->lock);
+ return -ENODEV;
+}
+
+static struct platform_driver tps68470_pmic_opregion_driver = {
+ .probe = tps68470_pmic_opregion_probe,
+ .driver = {
+ .name = "tps68470_pmic_opregion",
+ },
+};
+
+builtin_platform_driver(tps68470_pmic_opregion_driver)
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index d85e010ee2cc..316a0fc785e3 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -381,6 +381,7 @@ unsigned int acpi_dev_get_irq_type(int triggering, int polarity)
case ACPI_ACTIVE_BOTH:
if (triggering == ACPI_EDGE_SENSITIVE)
return IRQ_TYPE_EDGE_BOTH;
+ /* fall through */
default:
return IRQ_TYPE_NONE;
}
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 0fd57bf33524..bc303df60d5d 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -169,7 +169,8 @@ module_param_cb(debug_level, &param_ops_debug_level, &acpi_dbg_level, 0644);
static char trace_method_name[1024];
-int param_set_trace_method_name(const char *val, const struct kernel_param *kp)
+static int param_set_trace_method_name(const char *val,
+ const struct kernel_param *kp)
{
u32 saved_flags = 0;
bool is_abs_path = true;
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index b4fbb9929482..ec5b0f190231 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -71,18 +71,34 @@ static const struct always_present_id always_present_ids[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"),
}),
/*
- * The GPD win BIOS dated 20170320 has disabled the accelerometer, the
+ * The GPD win BIOS dated 20170221 has disabled the accelerometer, the
* drivers sometimes cause crashes under Windows and this is how the
* manufacturer has solved this :| Note that the the DMI data is less
* generic then it seems, a board_vendor of "AMI Corporation" is quite
* rare and a board_name of "Default String" also is rare.
+ *
+ * Unfortunately the GPD pocket also uses these strings and its BIOS
+ * was copy-pasted from the GPD win, so it has a disabled KIOX000A
+ * node which we should not enable, thus we also check the BIOS date.
*/
ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), {
DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "Default string"),
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
+ DMI_MATCH(DMI_BIOS_DATE, "02/21/2017")
+ }),
+ ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "Default string"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
DMI_MATCH(DMI_BIOS_DATE, "03/20/2017")
}),
+ ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "Default string"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
+ DMI_MATCH(DMI_BIOS_DATE, "05/25/2017")
+ }),
};
bool acpi_device_always_present(struct acpi_device *adev)
diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index 9b7005e1345e..e5a69679cfa2 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -69,7 +69,6 @@
#include "mailbox.h"
-#define MAX_PCC_SUBSPACES 256
#define MBOX_IRQ_NAME "pcc-mbox"
static struct mbox_chan *pcc_mbox_channels;