summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/devices/m25p80.c14
-rw-r--r--drivers/mtd/nand/denali.c497
-rw-r--r--drivers/mtd/nand/denali.h18
-rw-r--r--drivers/mtd/nand/nand_ids.c2
-rw-r--r--drivers/mtd/nand/plat_nand.c5
5 files changed, 205 insertions, 331 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index f90941a785e4..6f512b5c117b 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -347,8 +347,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
spi_message_add_tail(&t[1], &m);
/* Byte count starts at zero. */
- if (retlen)
- *retlen = 0;
+ *retlen = 0;
mutex_lock(&flash->lock);
@@ -394,8 +393,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
dev_name(&flash->spi->dev), __func__, "to",
(u32)to, len);
- if (retlen)
- *retlen = 0;
+ *retlen = 0;
/* sanity checks */
if (!len)
@@ -466,8 +464,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
spi_sync(flash->spi, &m);
- if (retlen)
- *retlen += m.actual_length - m25p_cmdsz(flash);
+ *retlen += m.actual_length - m25p_cmdsz(flash);
}
}
@@ -485,8 +482,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t actual;
int cmd_sz, ret;
- if (retlen)
- *retlen = 0;
+ *retlen = 0;
/* sanity checks */
if (!len)
@@ -797,7 +793,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
break;
}
- if (plat_id)
+ if (i < ARRAY_SIZE(m25p_ids) - 1)
id = plat_id;
else
dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 618fb42b86b0..532fe07cf886 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -56,7 +56,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
INTR_STATUS0__ERASE_COMP)
/* indicates whether or not the internal value for the flash bank is
- valid or not */
+ * valid or not */
#define CHIP_SELECT_INVALID -1
#define SUPPORT_8BITECC 1
@@ -71,7 +71,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
#define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd)
/* These constants are defined by the driver to enable common driver
- configuration options. */
+ * configuration options. */
#define SPARE_ACCESS 0x41
#define MAIN_ACCESS 0x42
#define MAIN_SPARE_ACCESS 0x43
@@ -97,7 +97,7 @@ static const struct pci_device_id denali_pci_ids[] = {
/* these are static lookup tables that give us easy access to
- registers in the NAND controller.
+ * registers in the NAND controller.
*/
static const uint32_t intr_status_addresses[4] = {INTR_STATUS0,
INTR_STATUS1,
@@ -119,9 +119,6 @@ static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
INTR_STATUS2__RST_COMP,
INTR_STATUS3__RST_COMP};
-/* specifies the debug level of the driver */
-static int nand_debug_level;
-
/* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali);
static uint32_t wait_for_irq(struct denali_nand_info *denali,
@@ -130,22 +127,6 @@ static void denali_irq_enable(struct denali_nand_info *denali,
uint32_t int_mask);
static uint32_t read_interrupt_status(struct denali_nand_info *denali);
-#define DEBUG_DENALI 0
-
-/* This is a wrapper for writing to the denali registers.
- * this allows us to create debug information so we can
- * observe how the driver is programming the device.
- * it uses standard linux convention for (val, addr) */
-static void denali_write32(uint32_t value, void *addr)
-{
- iowrite32(value, addr);
-
-#if DEBUG_DENALI
- printk(KERN_INFO "wrote: 0x%x -> 0x%x\n", value,
- (uint32_t)((uint32_t)addr & 0x1fff));
-#endif
-}
-
/* Certain operations for the denali NAND controller use
* an indexed mode to read/write data. The operation is
* performed by writing the address value of the command
@@ -155,15 +136,15 @@ static void denali_write32(uint32_t value, void *addr)
static void index_addr(struct denali_nand_info *denali,
uint32_t address, uint32_t data)
{
- denali_write32(address, denali->flash_mem);
- denali_write32(data, denali->flash_mem + 0x10);
+ iowrite32(address, denali->flash_mem);
+ iowrite32(data, denali->flash_mem + 0x10);
}
/* Perform an indexed read of the device */
static void index_addr_read_data(struct denali_nand_info *denali,
uint32_t address, uint32_t *pdata)
{
- denali_write32(address, denali->flash_mem);
+ iowrite32(address, denali->flash_mem);
*pdata = ioread32(denali->flash_mem + 0x10);
}
@@ -188,18 +169,11 @@ static void read_status(struct denali_nand_info *denali)
/* initialize the data buffer to store status */
reset_buf(denali);
- /* initiate a device status read */
- cmd = MODE_11 | BANK(denali->flash_bank);
- index_addr(denali, cmd | COMMAND_CYCLE, 0x70);
- denali_write32(cmd | STATUS_CYCLE, denali->flash_mem);
-
- /* update buffer with status value */
- write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
-
-#if DEBUG_DENALI
- printk(KERN_INFO "device reporting status value of 0x%2x\n",
- denali->buf.buf[0]);
-#endif
+ cmd = ioread32(denali->flash_reg + WRITE_PROTECT);
+ if (cmd)
+ write_byte_to_buf(denali, NAND_STATUS_WP);
+ else
+ write_byte_to_buf(denali, 0);
}
/* resets a specific device connected to the core */
@@ -213,12 +187,12 @@ static void reset_bank(struct denali_nand_info *denali)
clear_interrupts(denali);
bank = device_reset_banks[denali->flash_bank];
- denali_write32(bank, denali->flash_reg + DEVICE_RESET);
+ iowrite32(bank, denali->flash_reg + DEVICE_RESET);
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status & operation_timeout[denali->flash_bank])
- printk(KERN_ERR "reset bank failed.\n");
+ dev_err(&denali->dev->dev, "reset bank failed.\n");
}
/* Reset the flash controller */
@@ -226,28 +200,28 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
{
uint32_t i;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
- denali_write32(reset_complete[i] | operation_timeout[i],
+ iowrite32(reset_complete[i] | operation_timeout[i],
denali->flash_reg + intr_status_addresses[i]);
for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) {
- denali_write32(device_reset_banks[i],
+ iowrite32(device_reset_banks[i],
denali->flash_reg + DEVICE_RESET);
while (!(ioread32(denali->flash_reg +
- intr_status_addresses[i]) &
+ intr_status_addresses[i]) &
(reset_complete[i] | operation_timeout[i])))
- ;
+ cpu_relax();
if (ioread32(denali->flash_reg + intr_status_addresses[i]) &
operation_timeout[i])
- nand_dbg_print(NAND_DBG_WARN,
+ dev_dbg(&denali->dev->dev,
"NAND Reset operation timed out on bank %d\n", i);
}
for (i = 0; i < LLD_MAX_FLASH_BANKS; i++)
- denali_write32(reset_complete[i] | operation_timeout[i],
+ iowrite32(reset_complete[i] | operation_timeout[i],
denali->flash_reg + intr_status_addresses[i]);
return PASS;
@@ -280,7 +254,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
uint16_t acc_clks;
uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
en_lo = CEIL_DIV(Trp[mode], CLK_X);
@@ -317,7 +291,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
acc_clks++;
if ((data_invalid - acc_clks * CLK_X) < 2)
- nand_dbg_print(NAND_DBG_WARN, "%s, Line %d: Warning!\n",
+ dev_warn(&denali->dev->dev, "%s, Line %d: Warning!\n",
__FILE__, __LINE__);
addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
@@ -345,14 +319,14 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
(ioread32(denali->flash_reg + DEVICE_ID) == 0x88))
acc_clks = 6;
- denali_write32(acc_clks, denali->flash_reg + ACC_CLKS);
- denali_write32(re_2_we, denali->flash_reg + RE_2_WE);
- denali_write32(re_2_re, denali->flash_reg + RE_2_RE);
- denali_write32(we_2_re, denali->flash_reg + WE_2_RE);
- denali_write32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
- denali_write32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
- denali_write32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
- denali_write32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
+ iowrite32(acc_clks, denali->flash_reg + ACC_CLKS);
+ iowrite32(re_2_we, denali->flash_reg + RE_2_WE);
+ iowrite32(re_2_re, denali->flash_reg + RE_2_RE);
+ iowrite32(we_2_re, denali->flash_reg + WE_2_RE);
+ iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
+ iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
+ iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
+ iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
}
/* queries the NAND device to see what ONFI modes it supports. */
@@ -387,13 +361,13 @@ static void get_samsung_nand_para(struct denali_nand_info *denali,
{
if (device_id == 0xd3) { /* Samsung K9WAG08U1A */
/* Set timing register values according to datasheet */
- denali_write32(5, denali->flash_reg + ACC_CLKS);
- denali_write32(20, denali->flash_reg + RE_2_WE);
- denali_write32(12, denali->flash_reg + WE_2_RE);
- denali_write32(14, denali->flash_reg + ADDR_2_DATA);
- denali_write32(3, denali->flash_reg + RDWR_EN_LO_CNT);
- denali_write32(2, denali->flash_reg + RDWR_EN_HI_CNT);
- denali_write32(2, denali->flash_reg + CS_SETUP_CNT);
+ iowrite32(5, denali->flash_reg + ACC_CLKS);
+ iowrite32(20, denali->flash_reg + RE_2_WE);
+ iowrite32(12, denali->flash_reg + WE_2_RE);
+ iowrite32(14, denali->flash_reg + ADDR_2_DATA);
+ iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT);
+ iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT);
+ iowrite32(2, denali->flash_reg + CS_SETUP_CNT);
}
}
@@ -405,15 +379,15 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali)
/* spare area size for some kind of Toshiba NAND device */
if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
(ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
- denali_write32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) *
ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- denali_write32(tmp,
+ iowrite32(tmp,
denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
#if SUPPORT_15BITECC
- denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(15, denali->flash_reg + ECC_CORRECTION);
#elif SUPPORT_8BITECC
- denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(8, denali->flash_reg + ECC_CORRECTION);
#endif
}
}
@@ -426,26 +400,26 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
switch (device_id) {
case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
- denali_write32(128, denali->flash_reg + PAGES_PER_BLOCK);
- denali_write32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
- denali_write32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK);
+ iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
+ iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
main_size = 4096 *
ioread32(denali->flash_reg + DEVICES_CONNECTED);
spare_size = 224 *
ioread32(denali->flash_reg + DEVICES_CONNECTED);
- denali_write32(main_size,
+ iowrite32(main_size,
denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
- denali_write32(spare_size,
+ iowrite32(spare_size,
denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
- denali_write32(0, denali->flash_reg + DEVICE_WIDTH);
+ iowrite32(0, denali->flash_reg + DEVICE_WIDTH);
#if SUPPORT_15BITECC
- denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(15, denali->flash_reg + ECC_CORRECTION);
#elif SUPPORT_8BITECC
- denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(8, denali->flash_reg + ECC_CORRECTION);
#endif
break;
default:
- nand_dbg_print(NAND_DBG_WARN,
+ dev_warn(&denali->dev->dev,
"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
"Will use default parameter values instead.\n",
device_id);
@@ -453,7 +427,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
}
/* determines how many NAND chips are connected to the controller. Note for
- Intel CE4100 devices we don't support more than one device.
+ * Intel CE4100 devices we don't support more than one device.
*/
static void find_valid_banks(struct denali_nand_info *denali)
{
@@ -467,7 +441,7 @@ static void find_valid_banks(struct denali_nand_info *denali)
index_addr_read_data(denali,
(uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
- nand_dbg_print(NAND_DBG_DEBUG,
+ dev_dbg(&denali->dev->dev,
"Return 1st ID for bank[%d]: %x\n", i, id[i]);
if (i == 0) {
@@ -487,12 +461,13 @@ static void find_valid_banks(struct denali_nand_info *denali)
* Multichip support is not enabled.
*/
if (denali->total_used_banks != 1) {
- printk(KERN_ERR "Sorry, Intel CE4100 only supports "
+ dev_err(&denali->dev->dev,
+ "Sorry, Intel CE4100 only supports "
"a single NAND device.\n");
BUG();
}
}
- nand_dbg_print(NAND_DBG_DEBUG,
+ dev_dbg(&denali->dev->dev,
"denali->total_used_banks: %d\n", denali->total_used_banks);
}
@@ -526,8 +501,9 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
uint32_t id_bytes[5], addr;
uint8_t i, maf_id, device_id;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
+ dev_dbg(&denali->dev->dev,
+ "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
/* Use read id method to get device ID and other
* params. For some NAND chips, controller can't
@@ -554,12 +530,14 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
get_hynix_nand_para(denali, device_id);
}
- nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
- "acc_clks: %d, re_2_we: %d, we_2_re: %d,"
- "addr_2_data: %d, rdwr_en_lo_cnt: %d, "
+ dev_info(&denali->dev->dev,
+ "Dump timing register values:"
+ "acc_clks: %d, re_2_we: %d, re_2_re: %d\n"
+ "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
ioread32(denali->flash_reg + ACC_CLKS),
ioread32(denali->flash_reg + RE_2_WE),
+ ioread32(denali->flash_reg + RE_2_RE),
ioread32(denali->flash_reg + WE_2_RE),
ioread32(denali->flash_reg + ADDR_2_DATA),
ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
@@ -582,17 +560,17 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
static void denali_set_intr_modes(struct denali_nand_info *denali,
uint16_t INT_ENABLE)
{
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
if (INT_ENABLE)
- denali_write32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
+ iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
else
- denali_write32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
+ iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
}
/* validation function to verify that the controlling software is making
- a valid request
+ * a valid request
*/
static inline bool is_flash_bank_valid(int flash_bank)
{
@@ -609,10 +587,10 @@ static void denali_irq_init(struct denali_nand_info *denali)
int_mask = DENALI_IRQ_ALL;
/* Clear all status bits */
- denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS0);
- denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS1);
- denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS2);
- denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS3);
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS0);
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS1);
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS2);
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS3);
denali_irq_enable(denali, int_mask);
}
@@ -626,10 +604,10 @@ static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
static void denali_irq_enable(struct denali_nand_info *denali,
uint32_t int_mask)
{
- denali_write32(int_mask, denali->flash_reg + INTR_EN0);
- denali_write32(int_mask, denali->flash_reg + INTR_EN1);
- denali_write32(int_mask, denali->flash_reg + INTR_EN2);
- denali_write32(int_mask, denali->flash_reg + INTR_EN3);
+ iowrite32(int_mask, denali->flash_reg + INTR_EN0);
+ iowrite32(int_mask, denali->flash_reg + INTR_EN1);
+ iowrite32(int_mask, denali->flash_reg + INTR_EN2);
+ iowrite32(int_mask, denali->flash_reg + INTR_EN3);
}
/* This function only returns when an interrupt that this driver cares about
@@ -648,7 +626,7 @@ static inline void clear_interrupt(struct denali_nand_info *denali,
intr_status_reg = intr_status_addresses[denali->flash_bank];
- denali_write32(irq_mask, denali->flash_reg + intr_status_reg);
+ iowrite32(irq_mask, denali->flash_reg + intr_status_reg);
}
static void clear_interrupts(struct denali_nand_info *denali)
@@ -657,11 +635,7 @@ static void clear_interrupts(struct denali_nand_info *denali)
spin_lock_irq(&denali->irq_lock);
status = read_interrupt_status(denali);
-
-#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] = 0x30000000 | status;
- denali->idx %= 32;
-#endif
+ clear_interrupt(denali, status);
denali->irq_status = 0x0;
spin_unlock_irq(&denali->irq_lock);
@@ -676,17 +650,6 @@ static uint32_t read_interrupt_status(struct denali_nand_info *denali)
return ioread32(denali->flash_reg + intr_status_reg);
}
-#if DEBUG_DENALI
-static void print_irq_log(struct denali_nand_info *denali)
-{
- int i = 0;
-
- printk(KERN_INFO "ISR debug log index = %X\n", denali->idx);
- for (i = 0; i < 32; i++)
- printk(KERN_INFO "%08X: %08X\n", i, denali->irq_debug_array[i]);
-}
-#endif
-
/* This is the interrupt service routine. It handles all interrupts
* sent to this device. Note that on CE4100, this is a shared
* interrupt.
@@ -707,13 +670,6 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
* the interrupt, since this is a shared interrupt */
irq_status = denali_irq_detected(denali);
if (irq_status != 0) {
-#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] =
- 0x10000000 | irq_status;
- denali->idx %= 32;
-
- printk(KERN_INFO "IRQ status = 0x%04x\n", irq_status);
-#endif
/* handle interrupt */
/* first acknowledge it */
clear_interrupt(denali, irq_status);
@@ -739,41 +695,20 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
unsigned long timeout = msecs_to_jiffies(1000);
do {
-#if DEBUG_DENALI
- printk(KERN_INFO "waiting for 0x%x\n", irq_mask);
-#endif
comp_res =
wait_for_completion_timeout(&denali->complete, timeout);
spin_lock_irq(&denali->irq_lock);
intr_status = denali->irq_status;
-#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] =
- 0x20000000 | (irq_mask << 16) | intr_status;
- denali->idx %= 32;
-#endif
-
if (intr_status & irq_mask) {
denali->irq_status &= ~irq_mask;
spin_unlock_irq(&denali->irq_lock);
-#if DEBUG_DENALI
- if (retry)
- printk(KERN_INFO "status on retry = 0x%x\n",
- intr_status);
-#endif
/* our interrupt was detected */
break;
} else {
/* these are not the interrupts you are looking for -
* need to wait again */
spin_unlock_irq(&denali->irq_lock);
-#if DEBUG_DENALI
- print_irq_log(denali);
- printk(KERN_INFO "received irq nobody cared:"
- " irq_status = 0x%x, irq_mask = 0x%x,"
- " timeout = %ld\n", intr_status,
- irq_mask, comp_res);
-#endif
retry = true;
}
} while (comp_res != 0);
@@ -789,7 +724,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
}
/* This helper function setups the registers for ECC and whether or not
- the spare area will be transfered. */
+ * the spare area will be transfered. */
static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
bool transfer_spare)
{
@@ -800,13 +735,13 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0;
/* Enable spare area/ECC per user's request. */
- denali_write32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
- denali_write32(transfer_spare_flag,
+ iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
+ iowrite32(transfer_spare_flag,
denali->flash_reg + TRANSFER_SPARE_REG);
}
/* sends a pipeline command operation to the controller. See the Denali NAND
- controller's user guide for more information (section 4.2.3.6).
+ * controller's user guide for more information (section 4.2.3.6).
*/
static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
bool ecc_en,
@@ -827,16 +762,6 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
-#if DEBUG_DENALI
- spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] =
- 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) |
- (access_type << 4);
- denali->idx %= 32;
- spin_unlock_irq(&denali->irq_lock);
-#endif
-
-
/* clear interrupts */
clear_interrupts(denali);
@@ -844,14 +769,14 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
if (op == DENALI_WRITE && access_type != SPARE_ACCESS) {
cmd = MODE_01 | addr;
- denali_write32(cmd, denali->flash_mem);
+ iowrite32(cmd, denali->flash_mem);
} else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
/* read spare area */
cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, access_type);
cmd = MODE_01 | addr;
- denali_write32(cmd, denali->flash_mem);
+ iowrite32(cmd, denali->flash_mem);
} else if (op == DENALI_READ) {
/* setup page read request for access type */
cmd = MODE_10 | addr;
@@ -863,7 +788,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
*/
if (access_type == SPARE_ACCESS) {
cmd = MODE_01 | addr;
- denali_write32(cmd, denali->flash_mem);
+ iowrite32(cmd, denali->flash_mem);
} else {
index_addr(denali, (uint32_t)cmd,
0x2000 | op | page_count);
@@ -875,13 +800,14 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- printk(KERN_ERR "cmd, page, addr on timeout "
- "(0x%x, 0x%x, 0x%x)\n", cmd,
- denali->page, addr);
+ dev_err(&denali->dev->dev,
+ "cmd, page, addr on timeout "
+ "(0x%x, 0x%x, 0x%x)\n",
+ cmd, denali->page, addr);
status = FAIL;
} else {
cmd = MODE_01 | addr;
- denali_write32(cmd, denali->flash_mem);
+ iowrite32(cmd, denali->flash_mem);
}
}
}
@@ -902,7 +828,7 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali,
/* write the data to the flash memory */
buf32 = (uint32_t *)buf;
for (i = 0; i < len / 4; i++)
- denali_write32(*buf32++, denali->flash_mem + 0x10);
+ iowrite32(*buf32++, denali->flash_mem + 0x10);
return i*4; /* intent is to return the number of bytes read */
}
@@ -945,24 +871,15 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
DENALI_WRITE) == PASS) {
write_data_to_flash_mem(denali, buf, mtd->oobsize);
-#if DEBUG_DENALI
- spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] =
- 0x80000000 | mtd->oobsize;
- denali->idx %= 32;
- spin_unlock_irq(&denali->irq_lock);
-#endif
-
-
/* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- printk(KERN_ERR "OOB write failed\n");
+ dev_err(&denali->dev->dev, "OOB write failed\n");
status = -EIO;
}
} else {
- printk(KERN_ERR "unable to send pipeline command\n");
+ dev_err(&denali->dev->dev, "unable to send pipeline command\n");
status = -EIO;
}
return status;
@@ -977,9 +894,6 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
denali->page = page;
-#if DEBUG_DENALI
- printk(KERN_INFO "read_oob %d\n", page);
-#endif
if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
DENALI_READ) == PASS) {
read_data_from_flash_mem(denali, buf, mtd->oobsize);
@@ -990,7 +904,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0)
- printk(KERN_ERR "page on OOB timeout %d\n",
+ dev_err(&denali->dev->dev, "page on OOB timeout %d\n",
denali->page);
/* We set the device back to MAIN_ACCESS here as I observed
@@ -1002,14 +916,6 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
addr = BANK(denali->flash_bank) | denali->page;
cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, MAIN_ACCESS);
-
-#if DEBUG_DENALI
- spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] =
- 0x60000000 | mtd->oobsize;
- denali->idx %= 32;
- spin_unlock_irq(&denali->irq_lock);
-#endif
}
}
@@ -1029,12 +935,12 @@ bool is_erased(uint8_t *buf, int len)
#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET))
#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
-#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO))
-#define ECC_ERR_DEVICE(x) ((x) & ERR_CORRECTION_INFO__DEVICE_NR >> 8)
+#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO__ERROR_TYPE))
+#define ECC_ERR_DEVICE(x) (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8)
#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
- uint8_t *oobbuf, uint32_t irq_status)
+ uint32_t irq_status)
{
bool check_erased_page = false;
@@ -1043,6 +949,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
uint32_t err_address = 0, err_correction_info = 0;
uint32_t err_byte = 0, err_sector = 0, err_device = 0;
uint32_t err_correction_value = 0;
+ denali_set_intr_modes(denali, false);
do {
err_address = ioread32(denali->flash_reg +
@@ -1050,7 +957,6 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
err_sector = ECC_SECTOR(err_address);
err_byte = ECC_BYTE(err_address);
-
err_correction_info = ioread32(denali->flash_reg +
ERR_CORRECTION_INFO);
err_correction_value =
@@ -1058,20 +964,23 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
err_device = ECC_ERR_DEVICE(err_correction_info);
if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
- /* offset in our buffer is computed as:
- sector number * sector size + offset in
- sector
- */
- int offset = err_sector * ECC_SECTOR_SIZE +
- err_byte;
- if (offset < denali->mtd.writesize) {
+ /* If err_byte is larger than ECC_SECTOR_SIZE,
+ * means error happend in OOB, so we ignore
+ * it. It's no need for us to correct it
+ * err_device is represented the NAND error
+ * bits are happened in if there are more
+ * than one NAND connected.
+ * */
+ if (err_byte < ECC_SECTOR_SIZE) {
+ int offset;
+ offset = (err_sector *
+ ECC_SECTOR_SIZE +
+ err_byte) *
+ denali->devnum +
+ err_device;
/* correct the ECC error */
buf[offset] ^= err_correction_value;
denali->mtd.ecc_stats.corrected++;
- } else {
- /* bummer, couldn't correct the error */
- printk(KERN_ERR "ECC offset invalid\n");
- denali->mtd.ecc_stats.failed++;
}
} else {
/* if the error is not correctable, need to
@@ -1080,14 +989,16 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
* */
check_erased_page = true;
}
-
-#if DEBUG_DENALI
- printk(KERN_INFO "Detected ECC error in page %d:"
- " err_addr = 0x%08x, info to fix is"
- " 0x%08x\n", denali->page, err_address,
- err_correction_info);
-#endif
} while (!ECC_LAST_ERR(err_correction_info));
+ /* Once handle all ecc errors, controller will triger
+ * a ECC_TRANSACTION_DONE interrupt, so here just wait
+ * for a while for this interrupt
+ * */
+ while (!(read_interrupt_status(denali) &
+ INTR_STATUS0__ECC_TRANSACTION_DONE))
+ cpu_relax();
+ clear_interrupts(denali);
+ denali_set_intr_modes(denali, true);
}
return check_erased_page;
}
@@ -1100,7 +1011,7 @@ static void denali_enable_dma(struct denali_nand_info *denali, bool en)
if (en)
reg_val = DMA_ENABLE__FLAG;
- denali_write32(reg_val, denali->flash_reg + DMA_ENABLE);
+ iowrite32(reg_val, denali->flash_reg + DMA_ENABLE);
ioread32(denali->flash_reg + DMA_ENABLE);
}
@@ -1129,7 +1040,7 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
}
/* writes a page. user specifies type, and this function handles the
- configuration details. */
+ * configuration details. */
static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, bool raw_xfer)
{
@@ -1171,8 +1082,9 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- printk(KERN_ERR "timeout on write_page"
- " (type = %d)\n", raw_xfer);
+ dev_err(&denali->dev->dev,
+ "timeout on write_page (type = %d)\n",
+ raw_xfer);
denali->status =
(irq_status & INTR_STATUS0__PROGRAM_FAIL) ?
NAND_STATUS_FAIL : PASS;
@@ -1185,8 +1097,9 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
/* NAND core entry points */
/* this is the callback that the NAND core calls to write a page. Since
- writing a page with ECC or without is similar, all the work is done
- by write_page above. */
+ * writing a page with ECC or without is similar, all the work is done
+ * by write_page above.
+ * */
static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
{
@@ -1196,8 +1109,8 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
}
/* This is the callback that the NAND core calls to write a page without ECC.
- raw access is similiar to ECC page writes, so all the work is done in the
- write_page() function above.
+ * raw access is similiar to ECC page writes, so all the work is done in the
+ * write_page() function above.
*/
static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
@@ -1236,6 +1149,13 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
INTR_STATUS0__ECC_ERR;
bool check_erased_page = false;
+ if (page != denali->page) {
+ dev_err(&denali->dev->dev, "IN %s: page %d is not"
+ " equal to denali->page %d, investigate!!",
+ __func__, page, denali->page);
+ BUG();
+ }
+
setup_ecc_for_xfer(denali, true, false);
denali_enable_dma(denali, true);
@@ -1251,7 +1171,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
memcpy(buf, denali->buf.buf, mtd->writesize);
- check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status);
+ check_erased_page = handle_ecc(denali, buf, irq_status);
denali_enable_dma(denali, false);
if (check_erased_page) {
@@ -1280,6 +1200,13 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t irq_status = 0;
uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP;
+ if (page != denali->page) {
+ dev_err(&denali->dev->dev, "IN %s: page %d is not"
+ " equal to denali->page %d, investigate!!",
+ __func__, page, denali->page);
+ BUG();
+ }
+
setup_ecc_for_xfer(denali, false, true);
denali_enable_dma(denali, true);
@@ -1309,18 +1236,13 @@ static uint8_t denali_read_byte(struct mtd_info *mtd)
if (denali->buf.head < denali->buf.tail)
result = denali->buf.buf[denali->buf.head++];
-#if DEBUG_DENALI
- printk(KERN_INFO "read byte -> 0x%02x\n", result);
-#endif
return result;
}
static void denali_select_chip(struct mtd_info *mtd, int chip)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
-#if DEBUG_DENALI
- printk(KERN_INFO "denali select chip %d\n", chip);
-#endif
+
spin_lock_irq(&denali->irq_lock);
denali->flash_bank = chip;
spin_unlock_irq(&denali->irq_lock);
@@ -1332,9 +1254,6 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
int status = denali->status;
denali->status = 0;
-#if DEBUG_DENALI
- printk(KERN_INFO "waitfunc %d\n", status);
-#endif
return status;
}
@@ -1344,9 +1263,6 @@ static void denali_erase(struct mtd_info *mtd, int page)
uint32_t cmd = 0x0, irq_status = 0;
-#if DEBUG_DENALI
- printk(KERN_INFO "erase page: %d\n", page);
-#endif
/* clear interrupts */
clear_interrupts(denali);
@@ -1369,9 +1285,6 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
uint32_t addr, id;
int i;
-#if DEBUG_DENALI
- printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page);
-#endif
switch (cmd) {
case NAND_CMD_PAGEPROG:
break;
@@ -1415,7 +1328,9 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc_code)
{
- printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n");
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dev_err(&denali->dev->dev,
+ "denali_ecc_calculate called unexpectedly\n");
BUG();
return -EIO;
}
@@ -1423,14 +1338,18 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
- printk(KERN_ERR "denali_ecc_correct called unexpectedly\n");
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dev_err(&denali->dev->dev,
+ "denali_ecc_correct called unexpectedly\n");
BUG();
return -EIO;
}
static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
{
- printk(KERN_ERR "denali_ecc_hwctl called unexpectedly\n");
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dev_err(&denali->dev->dev,
+ "denali_ecc_hwctl called unexpectedly\n");
BUG();
}
/* end NAND core entry points */
@@ -1445,18 +1364,18 @@ static void denali_hw_init(struct denali_nand_info *denali)
* */
denali->bbtskipbytes = ioread32(denali->flash_reg +
SPARE_AREA_SKIP_BYTES);
- denali_irq_init(denali);
denali_nand_reset(denali);
- denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
- denali_write32(CHIP_EN_DONT_CARE__FLAG,
+ iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
+ iowrite32(CHIP_EN_DONT_CARE__FLAG,
denali->flash_reg + CHIP_ENABLE_DONT_CARE);
- denali_write32(0x0, denali->flash_reg + SPARE_AREA_SKIP_BYTES);
- denali_write32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
+ iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
/* Should set value for these registers when init */
- denali_write32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
- denali_write32(1, denali->flash_reg + ECC_ENABLE);
+ iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
+ iowrite32(1, denali->flash_reg + ECC_ENABLE);
+ denali_nand_timing_set(denali);
+ denali_irq_init(denali);
}
/* Althogh controller spec said SLC ECC is forceb to be 4bit,
@@ -1526,9 +1445,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
unsigned long csr_len, mem_len;
struct denali_nand_info *denali;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
denali = kzalloc(sizeof(*denali), GFP_KERNEL);
if (!denali)
return -ENOMEM;
@@ -1536,7 +1452,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
ret = pci_enable_device(dev);
if (ret) {
printk(KERN_ERR "Spectra: pci_enable_device failed.\n");
- goto failed_enable;
+ goto failed_alloc_memery;
}
if (id->driver_data == INTEL_CE4100) {
@@ -1547,7 +1463,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
printk(KERN_ERR "Intel CE4100 only supports"
" ONFI timing mode 1 or below\n");
ret = -EINVAL;
- goto failed_enable;
+ goto failed_enable_dev;
}
denali->platform = INTEL_CE4100;
mem_base = pci_resource_start(dev, 0);
@@ -1557,17 +1473,12 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
} else {
denali->platform = INTEL_MRST;
csr_base = pci_resource_start(dev, 0);
- csr_len = pci_resource_start(dev, 0);
+ csr_len = pci_resource_len(dev, 0);
mem_base = pci_resource_start(dev, 1);
mem_len = pci_resource_len(dev, 1);
if (!mem_len) {
mem_base = csr_base + csr_len;
mem_len = csr_len;
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: No second"
- " BAR for PCI device;"
- " assuming %08Lx\n",
- (uint64_t)csr_base);
}
}
@@ -1576,7 +1487,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (ret) {
printk(KERN_ERR "Spectra: no usable DMA configuration\n");
- goto failed_enable;
+ goto failed_enable_dev;
}
denali->buf.dma_buf =
pci_map_single(dev, denali->buf.buf,
@@ -1584,50 +1495,44 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) {
- printk(KERN_ERR "Spectra: failed to map DMA buffer\n");
- goto failed_enable;
+ dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n");
+ goto failed_enable_dev;
}
pci_set_master(dev);
denali->dev = dev;
+ denali->mtd.dev.parent = &dev->dev;
ret = pci_request_regions(dev, DENALI_NAND_NAME);
if (ret) {
printk(KERN_ERR "Spectra: Unable to request memory regions\n");
- goto failed_req_csr;
+ goto failed_dma_map;
}
denali->flash_reg = ioremap_nocache(csr_base, csr_len);
if (!denali->flash_reg) {
printk(KERN_ERR "Spectra: Unable to remap memory region\n");
ret = -ENOMEM;
- goto failed_remap_csr;
+ goto failed_req_regions;
}
- nand_dbg_print(NAND_DBG_DEBUG, "Spectra: CSR 0x%08Lx -> 0x%p (0x%lx)\n",
- (uint64_t)csr_base, denali->flash_reg, csr_len);
denali->flash_mem = ioremap_nocache(mem_base, mem_len);
if (!denali->flash_mem) {
printk(KERN_ERR "Spectra: ioremap_nocache failed!");
- iounmap(denali->flash_reg);
ret = -ENOMEM;
- goto failed_remap_csr;
+ goto failed_remap_reg;
}
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: Remapped flash base address: "
- "0x%p, len: %ld\n",
- denali->flash_mem, csr_len);
-
denali_hw_init(denali);
denali_drv_init(denali);
- nand_dbg_print(NAND_DBG_DEBUG, "Spectra: IRQ %d\n", dev->irq);
+ /* denali_isr register is done after all the hardware
+ * initilization is finished*/
if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
DENALI_NAND_NAME, denali)) {
printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
ret = -ENODEV;
- goto failed_request_irq;
+ goto failed_remap_mem;
}
/* now that our ISR is registered, we can enable interrupts */
@@ -1635,21 +1540,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
pci_set_drvdata(dev, denali);
- denali_nand_timing_set(denali);
-
- nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
- "acc_clks: %d, re_2_we: %d, we_2_re: %d,"
- "addr_2_data: %d, rdwr_en_lo_cnt: %d, "
- "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
- ioread32(denali->flash_reg + ACC_CLKS),
- ioread32(denali->flash_reg + RE_2_WE),
- ioread32(denali->flash_reg + WE_2_RE),
- ioread32(denali->flash_reg + ADDR_2_DATA),
- ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
- ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
- ioread32(denali->flash_reg + CS_SETUP_CNT));
-
- denali->mtd.name = "Denali NAND";
+ denali->mtd.name = "denali-nand";
denali->mtd.owner = THIS_MODULE;
denali->mtd.priv = &denali->nand;
@@ -1664,7 +1555,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
* with the nand subsystem */
if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) {
ret = -ENXIO;
- goto failed_nand;
+ goto failed_req_irq;
}
/* MTD supported page sizes vary by kernel. We validate our
@@ -1674,7 +1565,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
ret = -ENODEV;
printk(KERN_ERR "Spectra: device size not supported by this "
"version of MTD.");
- goto failed_nand;
+ goto failed_req_irq;
}
/* support for multi nand
@@ -1719,17 +1610,17 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* if MLC OOB size is large enough, use 15bit ECC*/
denali->nand.ecc.layout = &nand_15bit_oob;
denali->nand.ecc.bytes = ECC_15BITS;
- denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(15, denali->flash_reg + ECC_CORRECTION);
} else if (denali->mtd.oobsize < (denali->bbtskipbytes +
ECC_8BITS * (denali->mtd.writesize /
ECC_SECTOR_SIZE))) {
printk(KERN_ERR "Your NAND chip OOB is not large enough to"
" contain 8bit ECC correction codes");
- goto failed_nand;
+ goto failed_req_irq;
} else {
denali->nand.ecc.layout = &nand_8bit_oob;
denali->nand.ecc.bytes = ECC_8BITS;
- denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(8, denali->flash_reg + ECC_CORRECTION);
}
denali->nand.ecc.bytes *= denali->devnum;
@@ -1769,28 +1660,31 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (nand_scan_tail(&denali->mtd)) {
ret = -ENXIO;
- goto failed_nand;
+ goto failed_req_irq;
}
ret = add_mtd_device(&denali->mtd);
if (ret) {
- printk(KERN_ERR "Spectra: Failed to register"
- " MTD device: %d\n", ret);
- goto failed_nand;
+ dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n",
+ ret);
+ goto failed_req_irq;
}
return 0;
- failed_nand:
+failed_req_irq:
denali_irq_cleanup(dev->irq, denali);
- failed_request_irq:
- iounmap(denali->flash_reg);
+failed_remap_mem:
iounmap(denali->flash_mem);
- failed_remap_csr:
+failed_remap_reg:
+ iounmap(denali->flash_reg);
+failed_req_regions:
pci_release_regions(dev);
- failed_req_csr:
+failed_dma_map:
pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
PCI_DMA_BIDIRECTIONAL);
- failed_enable:
+failed_enable_dev:
+ pci_disable_device(dev);
+failed_alloc_memery:
kfree(denali);
return ret;
}
@@ -1800,9 +1694,6 @@ static void denali_pci_remove(struct pci_dev *dev)
{
struct denali_nand_info *denali = pci_get_drvdata(dev);
- nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
nand_release(&denali->mtd);
del_mtd_device(&denali->mtd);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index b680474e6333..3918bcb1561e 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -635,24 +635,6 @@
#define CLK_X 5
#define CLK_MULTI 4
-/* ffsport.h */
-#define VERBOSE 1
-
-#define NAND_DBG_WARN 1
-#define NAND_DBG_DEBUG 2
-#define NAND_DBG_TRACE 3
-
-#ifdef VERBOSE
-#define nand_dbg_print(level, args...) \
- do { \
- if (level <= nand_debug_level) \
- printk(KERN_ALERT args); \
- } while (0)
-#else
-#define nand_dbg_print(level, args...)
-#endif
-
-
/* spectraswconfig.h */
#define CMD_DMA 0
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a04b89105b65..c65f19074bc8 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -112,7 +112,7 @@ struct nand_flash_dev nand_flash_ids[] = {
{"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16},
/* 32 Gigabit */
- {"NAND 4GiB 3,3V 8-bit", 0xD7, 0, 4096, 0, LP_OPTIONS16},
+ {"NAND 4GiB 3,3V 8-bit", 0xD7, 0, 4096, 0, LP_OPTIONS},
/*
* Renesas AND 1 Gigabit. Those chips do not support extended id and
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 90e143e5ad3e..317aff428e42 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -37,6 +37,11 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
struct resource *res;
int err = 0;
+ if (pdata->chip.nr_chips < 1) {
+ dev_err(&pdev->dev, "invalid number of chips specified\n");
+ return -EINVAL;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENXIO;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 17:39:50 +0000