diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/serial/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/s3c6400.c | 151 | ||||
| -rw-r--r-- | drivers/serial/samsung.c | 8 |
4 files changed, 166 insertions, 4 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index f71a2e8a5f60..e4ae499e587e 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on ARM && PLAT_S3C24XX + depends on ARM && PLAT_S3C select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -515,6 +515,14 @@ config SERIAL_S3C24A0 help Serial port support for the Samsung S3C24A0 SoC +config SERIAL_S3C6400 + tristate "Samsung S3C6400/S3C6410 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410) + default y + help + Serial port support for the Samsung S3C6400 and S3C6410 + SoCs + config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 7769aece54ca..dfe775ac45b2 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o +obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c new file mode 100644 index 000000000000..06936d13393f --- /dev/null +++ b/drivers/serial/s3c6400.c @@ -0,0 +1,151 @@ +/* linux/drivers/serial/s3c6400.c + * + * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/serial.h> + +#include <asm/irq.h> +#include <mach/hardware.h> + +#include <plat/regs-serial.h> + +#include "samsung.h" + +static int s3c6400_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk0") == 0) { + ucon &= ~S3C6400_UCON_CLKMASK; + ucon |= S3C6400_UCON_UCLK0; + } else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S3C6400_UCON_UCLK1; + else if (strcmp(clk->name, "pclk") == 0) { + /* See notes about transitioning from UCLK to PCLK */ + ucon &= ~S3C6400_UCON_UCLK0; + } else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c6400_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + switch (ucon & S3C6400_UCON_CLKMASK) { + case S3C6400_UCON_UCLK0: + clk->name = "uclk0"; + break; + + case S3C6400_UCON_UCLK1: + clk->name = "uclk1"; + break; + + case S3C6400_UCON_PCLK: + case S3C6400_UCON_PCLK2: + clk->name = "pclk"; + break; + } + + return 0; +} + +static int s3c6400_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= S3C6400_UCON_CLKMASK; + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c6400_uart_inf = { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c6400_serial_getsource, + .set_clksrc = s3c6400_serial_setsource, + .reset_port = s3c6400_serial_resetport, +}; + +/* device management */ + +static int s3c6400_serial_probe(struct platform_device *dev) +{ + dbg("s3c6400_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); +} + +static struct platform_driver s3c6400_serial_drv = { + .probe = s3c6400_serial_probe, + .remove = s3c24xx_serial_remove, + .driver = { + .name = "s3c6400-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf); + +static int __init s3c6400_serial_init(void) +{ + return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf); +} + +static void __exit s3c6400_serial_exit(void) +{ + platform_driver_unregister(&s3c6400_serial_drv); +} + +module_init(s3c6400_serial_init); +module_exit(s3c6400_serial_exit); + +MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index bb8b57aae3af..44fc38afa228 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -47,9 +47,9 @@ #include <asm/irq.h> #include <mach/hardware.h> +#include <mach/map.h> #include <plat/regs-serial.h> -#include <mach/regs-gpio.h> #include "samsung.h" @@ -756,6 +756,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port) return "S3C2440"; case PORT_S3C2412: return "S3C2412"; + case PORT_S3C6400: + return "S3C6400/10"; default: return NULL; } @@ -1034,8 +1036,8 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); - port->mapbase = res->start; - port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART); + port->mapbase = res->start; + port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000); ret = platform_get_irq(platdev, 0); if (ret < 0) port->irq = 0; |