diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/input/input.c | 29 | ||||
| -rw-r--r-- | drivers/input/joystick/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/input/joystick/xpad.c | 190 | ||||
| -rw-r--r-- | drivers/input/mouse/appletouch.c | 111 | ||||
| -rw-r--r-- | drivers/input/mouse/lifebook.c | 2 | ||||
| -rw-r--r-- | drivers/input/serio/i8042-x86ia64io.h | 36 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ads7846.c | 80 | ||||
| -rw-r--r-- | drivers/input/touchscreen/fujitsu_ts.c | 189 |
10 files changed, 545 insertions, 113 deletions
diff --git a/drivers/input/input.c b/drivers/input/input.c index 75b4d2a83dd9..5fe755586623 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -471,37 +471,16 @@ static unsigned int input_proc_devices_poll(struct file *file, poll_table *wait) return 0; } -static struct list_head *list_get_nth_element(struct list_head *list, loff_t *pos) -{ - struct list_head *node; - loff_t i = 0; - - list_for_each(node, list) - if (i++ == *pos) - return node; - - return NULL; -} - -static struct list_head *list_get_next_element(struct list_head *list, struct list_head *element, loff_t *pos) -{ - if (element->next == list) - return NULL; - - ++(*pos); - return element->next; -} - static void *input_devices_seq_start(struct seq_file *seq, loff_t *pos) { /* acquire lock here ... Yes, we do need locking, I knowi, I know... */ - return list_get_nth_element(&input_dev_list, pos); + return seq_list_start(&input_dev_list, *pos); } static void *input_devices_seq_next(struct seq_file *seq, void *v, loff_t *pos) { - return list_get_next_element(&input_dev_list, v, pos); + return seq_list_next(v, &input_dev_list, pos); } static void input_devices_seq_stop(struct seq_file *seq, void *v) @@ -592,13 +571,13 @@ static void *input_handlers_seq_start(struct seq_file *seq, loff_t *pos) { /* acquire lock here ... Yes, we do need locking, I knowi, I know... */ seq->private = (void *)(unsigned long)*pos; - return list_get_nth_element(&input_handler_list, pos); + return seq_list_start(&input_handler_list, *pos); } static void *input_handlers_seq_next(struct seq_file *seq, void *v, loff_t *pos) { seq->private = (void *)(unsigned long)(*pos + 1); - return list_get_next_element(&input_handler_list, v, pos); + return seq_list_next(v, &input_handler_list, pos); } static void input_handlers_seq_stop(struct seq_file *seq, void *v) diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 12db72d83ea0..e2abe18e575d 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -275,4 +275,11 @@ config JOYSTICK_XPAD_FF ---help--- Say Y here if you want to take advantage of xbox 360 rumble features. +config JOYSTICK_XPAD_LEDS + bool "LED Support for Xbox360 controller 'BigX' LED" + depends on LEDS_CLASS && JOYSTICK_XPAD + ---help--- + This option enables support for the LED which surrounds the Big X on + XBox 360 controller. + endif diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 244089c52650..28080395899c 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -191,13 +191,18 @@ struct usb_xpad { unsigned char *idata; /* input data */ dma_addr_t idata_dma; -#ifdef CONFIG_JOYSTICK_XPAD_FF +#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS) struct urb *irq_out; /* urb for interrupt out report */ unsigned char *odata; /* output data */ dma_addr_t odata_dma; + struct mutex odata_mutex; +#endif + +#if defined(CONFIG_JOYSTICK_XPAD_LEDS) + struct xpad_led *led; #endif - char phys[65]; /* physical device path */ + char phys[64]; /* physical device path */ int dpad_mapping; /* map d-pad to buttons or to axes */ int xtype; /* type of xbox device */ @@ -349,7 +354,7 @@ exit: __FUNCTION__, retval); } -#ifdef CONFIG_JOYSTICK_XPAD_FF +#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS) static void xpad_irq_out(struct urb *urb) { int retval; @@ -376,29 +381,7 @@ exit: __FUNCTION__, retval); } -static int xpad_play_effect(struct input_dev *dev, void *data, - struct ff_effect *effect) -{ - struct usb_xpad *xpad = input_get_drvdata(dev); - - if (effect->type == FF_RUMBLE) { - __u16 strong = effect->u.rumble.strong_magnitude; - __u16 weak = effect->u.rumble.weak_magnitude; - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x08; - xpad->odata[2] = 0x00; - xpad->odata[3] = strong / 256; - xpad->odata[4] = weak / 256; - xpad->odata[5] = 0x00; - xpad->odata[6] = 0x00; - xpad->odata[7] = 0x00; - usb_submit_urb(xpad->irq_out, GFP_KERNEL); - } - - return 0; -} - -static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad) +static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) { struct usb_endpoint_descriptor *ep_irq_out; int error = -ENOMEM; @@ -411,6 +394,8 @@ static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad) if (!xpad->odata) goto fail1; + mutex_init(&xpad->odata_mutex); + xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL); if (!xpad->irq_out) goto fail2; @@ -423,25 +408,19 @@ static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad) xpad->irq_out->transfer_dma = xpad->odata_dma; xpad->irq_out->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_set_capability(xpad->dev, EV_FF, FF_RUMBLE); - - error = input_ff_create_memless(xpad->dev, NULL, xpad_play_effect); - if (error) - goto fail2; - return 0; fail2: usb_buffer_free(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); fail1: return error; } -static void xpad_stop_ff(struct usb_xpad *xpad) +static void xpad_stop_output(struct usb_xpad *xpad) { if (xpad->xtype == XTYPE_XBOX360) usb_kill_urb(xpad->irq_out); } -static void xpad_deinit_ff(struct usb_xpad *xpad) +static void xpad_deinit_output(struct usb_xpad *xpad) { if (xpad->xtype == XTYPE_XBOX360) { usb_free_urb(xpad->irq_out); @@ -449,13 +428,130 @@ static void xpad_deinit_ff(struct usb_xpad *xpad) xpad->odata, xpad->odata_dma); } } +#else +static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; } +static void xpad_deinit_output(struct usb_xpad *xpad) {} +static void xpad_stop_output(struct usb_xpad *xpad) {} +#endif + +#ifdef CONFIG_JOYSTICK_XPAD_FF +static int xpad_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + if (effect->type == FF_RUMBLE) { + __u16 strong = effect->u.rumble.strong_magnitude; + __u16 weak = effect->u.rumble.weak_magnitude; + xpad->odata[0] = 0x00; + xpad->odata[1] = 0x08; + xpad->odata[2] = 0x00; + xpad->odata[3] = strong / 256; + xpad->odata[4] = weak / 256; + xpad->odata[5] = 0x00; + xpad->odata[6] = 0x00; + xpad->odata[7] = 0x00; + usb_submit_urb(xpad->irq_out, GFP_KERNEL); + } + + return 0; +} + +static int xpad_init_ff(struct usb_xpad *xpad) +{ + input_set_capability(xpad->dev, EV_FF, FF_RUMBLE); + + return input_ff_create_memless(xpad->dev, NULL, xpad_play_effect); +} + +#else +static int xpad_init_ff(struct usb_xpad *xpad) { return 0; } +#endif + +#if defined(CONFIG_JOYSTICK_XPAD_LEDS) +#include <linux/leds.h> + +struct xpad_led { + char name[16]; + struct led_classdev led_cdev; + struct usb_xpad *xpad; +}; + +static void xpad_send_led_command(struct usb_xpad *xpad, int command) +{ + if (command >= 0 && command < 14) { + mutex_lock(&xpad->odata_mutex); + xpad->odata[0] = 0x01; + xpad->odata[1] = 0x03; + xpad->odata[2] = command; + usb_submit_urb(xpad->irq_out, GFP_KERNEL); + mutex_unlock(&xpad->odata_mutex); + } +} + +static void xpad_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct xpad_led *xpad_led = container_of(led_cdev, + struct xpad_led, led_cdev); + + xpad_send_led_command(xpad_led->xpad, value); +} + +static int xpad_led_probe(struct usb_xpad *xpad) +{ + static atomic_t led_seq = ATOMIC_INIT(0); + long led_no; + struct xpad_led *led; + struct led_classdev *led_cdev; + int error; + + if (xpad->xtype != XTYPE_XBOX360) + return 0; + + xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + led_no = (long)atomic_inc_return(&led_seq) - 1; + + snprintf(led->name, sizeof(led->name), "xpad%ld", led_no); + led->xpad = xpad; + + led_cdev = &led->led_cdev; + led_cdev->name = led->name; + led_cdev->brightness_set = xpad_led_set; + + error = led_classdev_register(&xpad->udev->dev, led_cdev); + if (error) { + kfree(led); + xpad->led = NULL; + return error; + } + + /* + * Light up the segment corresponding to controller number + */ + xpad_send_led_command(xpad, (led_no % 4) + 2); + + return 0; +} + +static void xpad_led_disconnect(struct usb_xpad *xpad) +{ + struct xpad_led *xpad_led = xpad->led; + + if (xpad_led) { + led_classdev_unregister(&xpad_led->led_cdev); + kfree(xpad_led->name); + } +} #else -static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; } -static void xpad_stop_ff(struct usb_xpad *xpad) { } -static void xpad_deinit_ff(struct usb_xpad *xpad) { } +static int xpad_led_probe(struct usb_xpad *xpad) { return 0; } +static void xpad_led_disconnect(struct usb_xpad *xpad) { } #endif + static int xpad_open(struct input_dev *dev) { struct usb_xpad *xpad = input_get_drvdata(dev); @@ -472,7 +568,7 @@ static void xpad_close(struct input_dev *dev) struct usb_xpad *xpad = input_get_drvdata(dev); usb_kill_urb(xpad->irq_in); - xpad_stop_ff(xpad); + xpad_stop_output(xpad); } static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) @@ -564,10 +660,18 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id for (i = 0; xpad_abs_pad[i] >= 0; i++) xpad_set_up_abs(input_dev, xpad_abs_pad[i]); - error = xpad_init_ff(intf, xpad); + error = xpad_init_output(intf, xpad); if (error) goto fail2; + error = xpad_init_ff(xpad); + if (error) + goto fail3; + + error = xpad_led_probe(xpad); + if (error) + goto fail3; + ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; usb_fill_int_urb(xpad->irq_in, udev, usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), @@ -578,12 +682,13 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id error = input_register_device(xpad->dev); if (error) - goto fail3; + goto fail4; usb_set_intfdata(intf, xpad); return 0; - fail3: usb_free_urb(xpad->irq_in); + fail4: usb_free_urb(xpad->irq_in); + fail3: xpad_deinit_output(xpad); fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); fail1: input_free_device(input_dev); kfree(xpad); @@ -597,8 +702,9 @@ static void xpad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (xpad) { + xpad_led_disconnect(xpad); input_unregister_device(xpad->dev); - xpad_deinit_ff(xpad); + xpad_deinit_output(xpad); usb_free_urb(xpad->irq_in); usb_buffer_free(xpad->udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index e3215267db11..2bea1b2c631c 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -155,6 +155,8 @@ struct atp { int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; int overflowwarn; /* overflow warning printed? */ int datalen; /* size of an USB urb transfer */ + int idlecount; /* number of empty packets */ + struct work_struct work; }; #define dbg_dump(msg, tab) \ @@ -208,6 +210,55 @@ static inline int atp_is_geyser_3(struct atp *dev) (productId == GEYSER4_JIS_PRODUCT_ID); } +/* + * By default Geyser 3 device sends standard USB HID mouse + * packets (Report ID 2). This code changes device mode, so it + * sends raw sensor reports (Report ID 5). + */ +static int atp_geyser3_init(struct usb_device *udev) +{ + char data[8]; + int size; + + size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + ATP_GEYSER3_MODE_READ_REQUEST_ID, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ATP_GEYSER3_MODE_REQUEST_VALUE, + ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); + + if (size != 8) { + err("Could not do mode read request from device" + " (Geyser 3 mode)"); + return -EIO; + } + + /* Apply the mode switch */ + data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE; + + size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + ATP_GEYSER3_MODE_WRITE_REQUEST_ID, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ATP_GEYSER3_MODE_REQUEST_VALUE, + ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); + + if (size != 8) { + err("Could not do mode write request to device" + " (Geyser 3 mode)"); + return -EIO; + } + return 0; +} + +/* Reinitialise the device if it's a geyser 3 */ +static void atp_reinit(struct work_struct *work) +{ + struct atp *dev = container_of(work, struct atp, work); + struct usb_device *udev = dev->udev; + + dev->idlecount = 0; + atp_geyser3_init(udev); +} + static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, int *z, int *fingers) { @@ -439,8 +490,8 @@ static void atp_complete(struct urb* urb) } dev->x_old = x; dev->y_old = y; - } - else if (!x && !y) { + + } else if (!x && !y) { dev->x_old = dev->y_old = -1; input_report_key(dev->input, BTN_TOUCH, 0); @@ -449,11 +500,21 @@ static void atp_complete(struct urb* urb) /* reset the accumulator on release */ memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); - } - input_report_key(dev->input, BTN_LEFT, - !!dev->data[dev->datalen - 1]); + /* Geyser 3 will continue to send packets continually after + the first touch unless reinitialised. Do so if it's been + idle for a while in order to avoid waking the kernel up + several hundred times a second */ + if (atp_is_geyser_3(dev)) { + dev->idlecount++; + if (dev->idlecount == 10) { + dev->valid = 0; + schedule_work(&dev->work); + } + } + } + input_report_key(dev->input, BTN_LEFT, dev->data[dev->datalen - 1] & 1); input_sync(dev->input); exit: @@ -480,6 +541,7 @@ static void atp_close(struct input_dev *input) struct atp *dev = input_get_drvdata(input); usb_kill_urb(dev->urb); + cancel_work_sync(&dev->work); dev->open = 0; } @@ -528,40 +590,10 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id dev->datalen = 81; if (atp_is_geyser_3(dev)) { - /* - * By default Geyser 3 device sends standard USB HID mouse - * packets (Report ID 2). This code changes device mode, so it - * sends raw sensor reports (Report ID 5). - */ - char data[8]; - int size; - - size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - ATP_GEYSER3_MODE_READ_REQUEST_ID, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ATP_GEYSER3_MODE_REQUEST_VALUE, - ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); - - if (size != 8) { - err("Could not do mode read request from device" - " (Geyser 3 mode)"); + /* switch to raw sensor mode */ + if (atp_geyser3_init(udev)) goto err_free_devs; - } - - /* Apply the mode switch */ - data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE; - - size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - ATP_GEYSER3_MODE_WRITE_REQUEST_ID, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ATP_GEYSER3_MODE_REQUEST_VALUE, - ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); - if (size != 8) { - err("Could not do mode write request to device" - " (Geyser 3 mode)"); - goto err_free_devs; - } printk("appletouch Geyser 3 inited.\n"); } @@ -636,6 +668,8 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id /* save our data pointer in this interface device */ usb_set_intfdata(iface, dev); + INIT_WORK(&dev->work, atp_reinit); + return 0; err_free_buffer: @@ -669,14 +703,17 @@ static void atp_disconnect(struct usb_interface *iface) static int atp_suspend(struct usb_interface *iface, pm_message_t message) { struct atp *dev = usb_get_intfdata(iface); + usb_kill_urb(dev->urb); dev->valid = 0; + return 0; } static int atp_resume(struct usb_interface *iface) { struct atp *dev = usb_get_intfdata(iface); + if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) return -EIO; diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 1740cadd9594..91109b49fde1 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -109,7 +109,7 @@ static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse) { struct lifebook_data *priv = psmouse->private; struct input_dev *dev1 = psmouse->dev; - struct input_dev *dev2 = priv->dev2; + struct input_dev *dev2 = priv ? priv->dev2 : NULL; unsigned char *packet = psmouse->packet; int relative_packet = packet[0] & 0x08; diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 4fca1e7f2678..702a526cf45b 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -366,6 +366,7 @@ static void i8042_pnp_exit(void) static int __init i8042_pnp_init(void) { char kbd_irq_str[4] = { 0 }, aux_irq_str[4] = { 0 }; + int pnp_data_busted = 0; int err; if (i8042_nopnp) { @@ -413,27 +414,48 @@ static int __init i8042_pnp_init(void) #endif if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) && - i8042_pnp_data_reg != i8042_data_reg) || !i8042_pnp_data_reg) { - printk(KERN_WARNING "PNP: PS/2 controller has invalid data port %#x; using default %#x\n", + i8042_pnp_data_reg != i8042_data_reg) || + !i8042_pnp_data_reg) { + printk(KERN_WARNING + "PNP: PS/2 controller has invalid data port %#x; " + "using default %#x\n", i8042_pnp_data_reg, i8042_data_reg); i8042_pnp_data_reg = i8042_data_reg; + pnp_data_busted = 1; } if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) && - i8042_pnp_command_reg != i8042_command_reg) || !i8042_pnp_command_reg) { - printk(KERN_WARNING "PNP: PS/2 controller has invalid command port %#x; using default %#x\n", + i8042_pnp_command_reg != i8042_command_reg) || + !i8042_pnp_command_reg) { + printk(KERN_WARNING + "PNP: PS/2 controller has invalid command port %#x; " + "using default %#x\n", i8042_pnp_command_reg, i8042_command_reg); i8042_pnp_command_reg = i8042_command_reg; + pnp_data_busted = 1; } if (!i8042_nokbd && !i8042_pnp_kbd_irq) { - printk(KERN_WARNING "PNP: PS/2 controller doesn't have KBD irq; using default %d\n", i8042_kbd_irq); + printk(KERN_WARNING + "PNP: PS/2 controller doesn't have KBD irq; " + "using default %d\n", i8042_kbd_irq); i8042_pnp_kbd_irq = i8042_kbd_irq; + pnp_data_busted = 1; } if (!i8042_noaux && !i8042_pnp_aux_irq) { - printk(KERN_WARNING "PNP: PS/2 controller doesn't have AUX irq; using default %d\n", i8042_aux_irq); - i8042_pnp_aux_irq = i8042_aux_irq; + if (!pnp_data_busted && i8042_pnp_kbd_irq) { + printk(KERN_WARNING + "PNP: PS/2 appears to have AUX port disabled, " + "if this is incorrect please boot with " + "i8042.nopnp\n"); + i8042_noaux = 1; + } else { + printk(KERN_WARNING + "PNP: PS/2 controller doesn't have AUX irq; " + "using default %d\n", i8042_aux_irq); + i8042_pnp_aux_irq = i8042_aux_irq; + } } i8042_data_reg = i8042_pnp_data_reg; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 69371779806a..f929fcdbae2e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -54,6 +54,19 @@ config TOUCHSCREEN_CORGI To compile this driver as a module, choose M here: the module will be called corgi_ts. +config TOUCHSCREEN_FUJITSU + tristate "Fujitsu serial touchscreen" + select SERIO + help + Say Y here if you have the Fujitsu touchscreen (such as one + installed in Lifebook P series laptop) connected to your + system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called fujitsu-ts. + config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 2f86d6ad06d3..5de8933c4993 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o +obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 1c9069cd3bae..96581d08774f 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -95,7 +95,7 @@ struct ads7846 { u16 dummy; /* for the pwrdown read */ struct ts_event tc; - struct spi_transfer xfer[10]; + struct spi_transfer xfer[18]; struct spi_message msg[5]; struct spi_message *last_msg; int msg_idx; @@ -107,6 +107,8 @@ struct ads7846 { u16 debounce_tol; u16 debounce_rep; + u16 penirq_recheck_delay_usecs; + spinlock_t lock; struct hrtimer timer; unsigned pendown:1; /* P: lock */ @@ -553,6 +555,15 @@ static void ads7846_rx(void *ads) return; } + /* Maybe check the pendown state before reporting. This discards + * false readings when the pen is lifted. + */ + if (ts->penirq_recheck_delay_usecs) { + udelay(ts->penirq_recheck_delay_usecs); + if (!ts->get_pendown_state()) + Rt = 0; + } + /* NOTE: We can't rely on the pressure to determine the pen down * state, even this controller has a pressure sensor. The pressure * value can fluctuate for quite a while after lifting the pen and @@ -896,6 +907,10 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->filter = ads7846_no_filter; ts->get_pendown_state = pdata->get_pendown_state; + if (pdata->penirq_recheck_delay_usecs) + ts->penirq_recheck_delay_usecs = + pdata->penirq_recheck_delay_usecs; + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id); input_dev->name = "ADS784x Touchscreen"; @@ -936,6 +951,24 @@ static int __devinit ads7846_probe(struct spi_device *spi) x->len = 2; spi_message_add_tail(x, m); + /* the first sample after switching drivers can be low quality; + * optionally discard it, using a second one after the signals + * have had enough time to stabilize. + */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &ts->read_y; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &ts->tc.y; + x->len = 2; + spi_message_add_tail(x, m); + } + m->complete = ads7846_rx_val; m->context = ts; @@ -954,6 +987,21 @@ static int __devinit ads7846_probe(struct spi_device *spi) x->len = 2; spi_message_add_tail(x, m); + /* ... maybe discard first sample ... */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &ts->read_x; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &ts->tc.x; + x->len = 2; + spi_message_add_tail(x, m); + } + m->complete = ads7846_rx_val; m->context = ts; @@ -973,6 +1021,21 @@ static int __devinit ads7846_probe(struct spi_device *spi) x->len = 2; spi_message_add_tail(x, m); + /* ... maybe discard first sample ... */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &ts->read_z1; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &ts->tc.z1; + x->len = 2; + spi_message_add_tail(x, m); + } + m->complete = ads7846_rx_val; m->context = ts; @@ -990,6 +1053,21 @@ static int __devinit ads7846_probe(struct spi_device *spi) x->len = 2; spi_message_add_tail(x, m); + /* ... maybe discard first sample ... */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &ts->read_z2; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &ts->tc.z2; + x->len = 2; + spi_message_add_tail(x, m); + } + m->complete = ads7846_rx_val; m->context = ts; } diff --git a/drivers/input/touchscreen/fujitsu_ts.c b/drivers/input/touchscreen/fujitsu_ts.c new file mode 100644 index 000000000000..daf7a4afc935 --- /dev/null +++ b/drivers/input/touchscreen/fujitsu_ts.c @@ -0,0 +1,189 @@ +/* + * Fujitsu serial touchscreen driver + * + * Copyright (c) Dmitry Torokhov <dtor@mail.ru> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Fujitsu serial touchscreen driver" + +MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define FUJITSU_LENGTH 5 + +/* + * Per-touchscreen data. + */ +struct fujitsu { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[FUJITSU_LENGTH]; + char phys[32]; +}; + +/* + * Decode serial data (5 bytes per packet) + * First byte + * 1 C 0 0 R S S S + * Where C is 1 while in calibration mode (which we don't use) + * R is 1 when no coordinate corection was done. + * S are button state + */ +static irqreturn_t fujitsu_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct fujitsu *fujitsu = serio_get_drvdata(serio); + struct input_dev *dev = fujitsu->dev; + + if (fujitsu->idx == 0) { + /* resync skip until start of frame */ + if ((data & 0xf0) != 0x80) + return IRQ_HANDLED; + } else { + /* resync skip garbage */ + if (data & 0x80) { + fujitsu->idx = 0; + return IRQ_HANDLED; + } + } + + fujitsu->data[fujitsu->idx++] = data; + if (fujitsu->idx == FUJITSU_LENGTH) { + input_report_abs(dev, ABS_X, + (fujitsu->data[2] << 7) | fujitsu->data[1]); + input_report_abs(dev, ABS_Y, + (fujitsu->data[4] << 7) | fujitsu->data[3]); + input_report_key(dev, BTN_TOUCH, + (fujitsu->data[0] & 0x03) != 2); + input_sync(dev); + fujitsu->idx = 0; + } + + return IRQ_HANDLED; +} + +/* + * fujitsu_disconnect() is the opposite of fujitsu_connect() + */ +static void fujitsu_disconnect(struct serio *serio) +{ + struct fujitsu *fujitsu = serio_get_drvdata(serio); + + input_get_device(fujitsu->dev); + input_unregister_device(fujitsu->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(fujitsu->dev); + kfree(fujitsu); +} + +/* + * fujitsu_connect() is the routine that is called when someone adds a + * new serio device that supports the Fujitsu protocol and registers it + * as input device. + */ +static int fujitsu_connect(struct serio *serio, struct serio_driver *drv) +{ + struct fujitsu *fujitsu; + struct input_dev *input_dev; + int err; + + fujitsu = kzalloc(sizeof(struct fujitsu), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!fujitsu || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + fujitsu->serio = serio; + fujitsu->dev = input_dev; + snprintf(fujitsu->phys, sizeof(fujitsu->phys), + "%s/input0", serio->phys); + + input_dev->name = "Fujitsu Serial Touchscreen"; + input_dev->phys = fujitsu->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_FUJITSU; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 4096, 0, 0); + serio_set_drvdata(serio, fujitsu); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(fujitsu->dev); + if (err) + goto fail3; + + return 0; + + fail3: + serio_close(serio); + fail2: + serio_set_drvdata(serio, NULL); + fail1: + input_free_device(input_dev); + kfree(fujitsu); + return err; +} + +/* + * The serio driver structure. + */ +static struct serio_device_id fujitsu_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_FUJITSU, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, fujitsu_serio_ids); + +static struct serio_driver fujitsu_drv = { + .driver = { + .name = "fujitsu_ts", + }, + .description = DRIVER_DESC, + .id_table = fujitsu_serio_ids, + .interrupt = fujitsu_interrupt, + .connect = fujitsu_connect, + .disconnect = fujitsu_disconnect, +}; + +static int __init fujitsu_init(void) +{ + return serio_register_driver(&fujitsu_drv); +} + +static void __exit fujitsu_exit(void) +{ + serio_unregister_driver(&fujitsu_drv); +} + +module_init(fujitsu_init); +module_exit(fujitsu_exit); |