diff options
Diffstat (limited to 'drivers')
35 files changed, 437 insertions, 445 deletions
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 51410c2ac2cb..4d978a3c88f7 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -27,6 +27,14 @@ */ #define SRC_CR 0x00U +#define SRC_CR_T0_ENSEL BIT(15) +#define SRC_CR_T1_ENSEL BIT(17) +#define SRC_CR_T2_ENSEL BIT(19) +#define SRC_CR_T3_ENSEL BIT(21) +#define SRC_CR_T4_ENSEL BIT(23) +#define SRC_CR_T5_ENSEL BIT(25) +#define SRC_CR_T6_ENSEL BIT(27) +#define SRC_CR_T7_ENSEL BIT(29) #define SRC_XTALCR 0x0CU #define SRC_XTALCR_XTALTIMEN BIT(20) #define SRC_XTALCR_SXTALDIS BIT(19) @@ -543,6 +551,19 @@ void __init nomadik_clk_init(void) __func__, np->name); return; } + + /* Set all timers to use the 2.4 MHz TIMCLK */ + val = readl(src_base + SRC_CR); + val |= SRC_CR_T0_ENSEL; + val |= SRC_CR_T1_ENSEL; + val |= SRC_CR_T2_ENSEL; + val |= SRC_CR_T3_ENSEL; + val |= SRC_CR_T4_ENSEL; + val |= SRC_CR_T5_ENSEL; + val |= SRC_CR_T6_ENSEL; + val |= SRC_CR_T7_ENSEL; + writel(val, src_base + SRC_CR); + val = readl(src_base + SRC_XTALCR); pr_info("SXTALO is %s\n", (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c index fc777bdc1886..81a202d12a7a 100644 --- a/drivers/clk/mvebu/armada-370.c +++ b/drivers/clk/mvebu/armada-370.c @@ -39,8 +39,8 @@ static const struct coreclk_ratio a370_coreclk_ratios[] __initconst = { }; static const u32 a370_tclk_freqs[] __initconst = { - 16600000, - 20000000, + 166000000, + 200000000, }; static u32 __init a370_get_tclk_freq(void __iomem *sar) diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c index 5bb848cac6ec..81dd31a686df 100644 --- a/drivers/clk/socfpga/clk.c +++ b/drivers/clk/socfpga/clk.c @@ -49,7 +49,7 @@ #define SOCFPGA_L4_SP_CLK "l4_sp_clk" #define SOCFPGA_NAND_CLK "nand_clk" #define SOCFPGA_NAND_X_CLK "nand_x_clk" -#define SOCFPGA_MMC_CLK "mmc_clk" +#define SOCFPGA_MMC_CLK "sdmmc_clk" #define SOCFPGA_DB_CLK "gpio_db_clk" #define div_mask(width) ((1 << (width)) - 1) diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c index 67ccf4aa7277..f5e4c21b301f 100644 --- a/drivers/clk/versatile/clk-icst.c +++ b/drivers/clk/versatile/clk-icst.c @@ -107,7 +107,7 @@ static int icst_set_rate(struct clk_hw *hw, unsigned long rate, vco = icst_hz_to_vco(icst->params, rate); icst->rate = icst_hz(icst->params, vco); - vco_set(icst->vcoreg, icst->lockreg, vco); + vco_set(icst->lockreg, icst->vcoreg, vco); return 0; } diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 05ad9ba0a67e..fe58d0833a11 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -61,7 +61,7 @@ static int drm_version(struct drm_device *dev, void *data, /** Ioctl table */ static const struct drm_ioctl_desc drm_ioctls[] = { - DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, DRM_UNLOCKED|DRM_RENDER_ALLOW), DRM_IOCTL_DEF(DRM_IOCTL_GET_UNIQUE, drm_getunique, 0), DRM_IOCTL_DEF(DRM_IOCTL_GET_MAGIC, drm_getmagic, 0), DRM_IOCTL_DEF(DRM_IOCTL_IRQ_BUSID, drm_irq_by_busid, DRM_MASTER|DRM_ROOT_ONLY), diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index ea9022ef15d5..10d1de5bce6f 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -83,8 +83,7 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder, return true; } -static void intel_crt_get_config(struct intel_encoder *encoder, - struct intel_crtc_config *pipe_config) +static unsigned int intel_crt_get_flags(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_crt *crt = intel_encoder_to_crt(encoder); @@ -102,7 +101,25 @@ static void intel_crt_get_config(struct intel_encoder *encoder, else flags |= DRM_MODE_FLAG_NVSYNC; - pipe_config->adjusted_mode.flags |= flags; + return flags; +} + +static void intel_crt_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) +{ + pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder); +} + +static void hsw_crt_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) +{ + intel_ddi_get_config(encoder, pipe_config); + + pipe_config->adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC | + DRM_MODE_FLAG_NHSYNC | + DRM_MODE_FLAG_PVSYNC | + DRM_MODE_FLAG_NVSYNC); + pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder); } /* Note: The caller is required to filter out dpms modes not supported by the @@ -799,7 +816,10 @@ void intel_crt_init(struct drm_device *dev) crt->base.mode_set = intel_crt_mode_set; crt->base.disable = intel_disable_crt; crt->base.enable = intel_enable_crt; - crt->base.get_config = intel_crt_get_config; + if (IS_HASWELL(dev)) + crt->base.get_config = hsw_crt_get_config; + else + crt->base.get_config = intel_crt_get_config; if (I915_HAS_HOTPLUG(dev)) crt->base.hpd_pin = HPD_CRT; if (HAS_DDI(dev)) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 63de2701b974..b53fff84a7d5 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1249,8 +1249,8 @@ static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder) intel_dp_check_link_status(intel_dp); } -static void intel_ddi_get_config(struct intel_encoder *encoder, - struct intel_crtc_config *pipe_config) +void intel_ddi_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); @@ -1268,6 +1268,23 @@ static void intel_ddi_get_config(struct intel_encoder *encoder, flags |= DRM_MODE_FLAG_NVSYNC; pipe_config->adjusted_mode.flags |= flags; + + switch (temp & TRANS_DDI_BPC_MASK) { + case TRANS_DDI_BPC_6: + pipe_config->pipe_bpp = 18; + break; + case TRANS_DDI_BPC_8: + pipe_config->pipe_bpp = 24; + break; + case TRANS_DDI_BPC_10: + pipe_config->pipe_bpp = 30; + break; + case TRANS_DDI_BPC_12: + pipe_config->pipe_bpp = 36; + break; + default: + break; + } } static void intel_ddi_destroy(struct drm_encoder *encoder) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 581fb4b2f766..d78d33f9337d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2327,9 +2327,10 @@ static void intel_fdi_normal_train(struct drm_crtc *crtc) FDI_FE_ERRC_ENABLE); } -static bool pipe_has_enabled_pch(struct intel_crtc *intel_crtc) +static bool pipe_has_enabled_pch(struct intel_crtc *crtc) { - return intel_crtc->base.enabled && intel_crtc->config.has_pch_encoder; + return crtc->base.enabled && crtc->active && + crtc->config.has_pch_encoder; } static void ivb_modeset_global_resources(struct drm_device *dev) @@ -2979,6 +2980,48 @@ static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc, I915_READ(VSYNCSHIFT(cpu_transcoder))); } +static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t temp; + + temp = I915_READ(SOUTH_CHICKEN1); + if (temp & FDI_BC_BIFURCATION_SELECT) + return; + + WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE); + WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE); + + temp |= FDI_BC_BIFURCATION_SELECT; + DRM_DEBUG_KMS("enabling fdi C rx\n"); + I915_WRITE(SOUTH_CHICKEN1, temp); + POSTING_READ(SOUTH_CHICKEN1); +} + +static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc) +{ + struct drm_device *dev = intel_crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + switch (intel_crtc->pipe) { + case PIPE_A: + break; + case PIPE_B: + if (intel_crtc->config.fdi_lanes > 2) + WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT); + else + cpt_enable_fdi_bc_bifurcation(dev); + + break; + case PIPE_C: + cpt_enable_fdi_bc_bifurcation(dev); + + break; + default: + BUG(); + } +} + /* * Enable PCH resources required for PCH ports: * - PCH PLLs @@ -2997,6 +3040,9 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) assert_pch_transcoder_disabled(dev_priv, pipe); + if (IS_IVYBRIDGE(dev)) + ivybridge_update_fdi_bc_bifurcation(intel_crtc); + /* Write the TU size bits before fdi link training, so that error * detection works. */ I915_WRITE(FDI_RX_TUSIZE1(pipe), @@ -4983,6 +5029,22 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc, if (!(tmp & PIPECONF_ENABLE)) return false; + if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) { + switch (tmp & PIPECONF_BPC_MASK) { + case PIPECONF_6BPC: + pipe_config->pipe_bpp = 18; + break; + case PIPECONF_8BPC: + pipe_config->pipe_bpp = 24; + break; + case PIPECONF_10BPC: + pipe_config->pipe_bpp = 30; + break; + default: + break; + } + } + intel_get_pipe_timings(crtc, pipe_config); i9xx_get_pfit_config(crtc, pipe_config); @@ -5576,48 +5638,6 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc, return true; } -static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t temp; - - temp = I915_READ(SOUTH_CHICKEN1); - if (temp & FDI_BC_BIFURCATION_SELECT) - return; - - WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE); - WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE); - - temp |= FDI_BC_BIFURCATION_SELECT; - DRM_DEBUG_KMS("enabling fdi C rx\n"); - I915_WRITE(SOUTH_CHICKEN1, temp); - POSTING_READ(SOUTH_CHICKEN1); -} - -static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc) -{ - struct drm_device *dev = intel_crtc->base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - - switch (intel_crtc->pipe) { - case PIPE_A: - break; - case PIPE_B: - if (intel_crtc->config.fdi_lanes > 2) - WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT); - else - cpt_enable_fdi_bc_bifurcation(dev); - - break; - case PIPE_C: - cpt_enable_fdi_bc_bifurcation(dev); - - break; - default: - BUG(); - } -} - int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp) { /* @@ -5811,9 +5831,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, &intel_crtc->config.fdi_m_n); } - if (IS_IVYBRIDGE(dev)) - ivybridge_update_fdi_bc_bifurcation(intel_crtc); - ironlake_set_pipeconf(crtc); /* Set up the display plane register */ @@ -5881,6 +5898,23 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc, if (!(tmp & PIPECONF_ENABLE)) return false; + switch (tmp & PIPECONF_BPC_MASK) { + case PIPECONF_6BPC: + pipe_config->pipe_bpp = 18; + break; + case PIPECONF_8BPC: + pipe_config->pipe_bpp = 24; + break; + case PIPECONF_10BPC: + pipe_config->pipe_bpp = 30; + break; + case PIPECONF_12BPC: + pipe_config->pipe_bpp = 36; + break; + default: + break; + } + if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) { struct intel_shared_dpll *pll; @@ -8612,6 +8646,9 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_X(dpll_hw_state.fp0); PIPE_CONF_CHECK_X(dpll_hw_state.fp1); + if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) + PIPE_CONF_CHECK_I(pipe_bpp); + #undef PIPE_CONF_CHECK_X #undef PIPE_CONF_CHECK_I #undef PIPE_CONF_CHECK_FLAGS diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2c555f91bfae..1a431377d83b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1401,6 +1401,26 @@ static void intel_dp_get_config(struct intel_encoder *encoder, else pipe_config->port_clock = 270000; } + + if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp && + pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) { + /* + * This is a big fat ugly hack. + * + * Some machines in UEFI boot mode provide us a VBT that has 18 + * bpp and 1.62 GHz link bandwidth for eDP, which for reasons + * unknown we fail to light up. Yet the same BIOS boots up with + * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as + * max, not what it tells us to use. + * + * Note: This will still be broken if the eDP panel is not lit + * up by the BIOS, and thus we can't get the mode at module + * load. + */ + DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", + pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp); + dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp; + } } static bool is_edp_psr(struct intel_dp *intel_dp) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 9b7b68fd5d47..7f2b384ac939 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -765,6 +765,8 @@ extern void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder); extern bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector); extern void intel_ddi_fdi_disable(struct drm_crtc *crtc); +extern void intel_ddi_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config); extern void intel_display_handle_reset(struct drm_device *dev); extern bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev, diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 831a5c021c4b..b8af94a5be39 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -700,6 +700,22 @@ static const struct dmi_system_id intel_no_lvds[] = { }, { .callback = intel_no_lvds_dmi_callback, + .ident = "Intel D410PT", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel"), + DMI_MATCH(DMI_BOARD_NAME, "D410PT"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Intel D425KT", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "D425KT"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, .ident = "Intel D510MO", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Intel"), diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index fe1de855775e..57fcc4b16a52 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -291,6 +291,7 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode /* fglrx clears sth in AFMT_AUDIO_PACKET_CONTROL2 here */ WREG32(HDMI_ACR_PACKET_CONTROL + offset, + HDMI_ACR_SOURCE | /* select SW CTS value */ HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ evergreen_hdmi_update_ACR(encoder, mode->clock); diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c index 71399065db04..b41905573cd2 100644 --- a/drivers/gpu/drm/radeon/kv_dpm.c +++ b/drivers/gpu/drm/radeon/kv_dpm.c @@ -2635,7 +2635,7 @@ int kv_dpm_init(struct radeon_device *rdev) pi->caps_sclk_ds = true; pi->enable_auto_thermal_throttling = true; pi->disable_nb_ps3_in_battery = false; - pi->bapm_enable = true; + pi->bapm_enable = false; pi->voltage_drop_t = 0; pi->caps_sclk_throttle_low_notification = false; pi->caps_fps = false; /* true? */ diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index a400ac1c4147..24f4960f59ee 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1272,8 +1272,8 @@ struct radeon_blacklist_clocks struct radeon_clock_and_voltage_limits { u32 sclk; u32 mclk; - u32 vddc; - u32 vddci; + u16 vddc; + u16 vddci; }; struct radeon_clock_array { diff --git a/drivers/input/input.c b/drivers/input/input.c index c04469928925..e75d015024a1 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1734,6 +1734,7 @@ EXPORT_SYMBOL_GPL(input_class); */ struct input_dev *input_allocate_device(void) { + static atomic_t input_no = ATOMIC_INIT(0); struct input_dev *dev; dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL); @@ -1743,9 +1744,13 @@ struct input_dev *input_allocate_device(void) device_initialize(&dev->dev); mutex_init(&dev->mutex); spin_lock_init(&dev->event_lock); + init_timer(&dev->timer); INIT_LIST_HEAD(&dev->h_list); INIT_LIST_HEAD(&dev->node); + dev_set_name(&dev->dev, "input%ld", + (unsigned long) atomic_inc_return(&input_no) - 1); + __module_get(THIS_MODULE); } @@ -2019,7 +2024,6 @@ static void devm_input_device_unregister(struct device *dev, void *res) */ int input_register_device(struct input_dev *dev) { - static atomic_t input_no = ATOMIC_INIT(0); struct input_devres *devres = NULL; struct input_handler *handler; unsigned int packet_size; @@ -2059,7 +2063,6 @@ int input_register_device(struct input_dev *dev) * If delay and period are pre-set by the driver, then autorepeating * is handled by the driver itself and we don't do it in input.c. */ - init_timer(&dev->timer); if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) { dev->timer.data = (long) dev; dev->timer.function = input_repeat_key; @@ -2073,9 +2076,6 @@ int input_register_device(struct input_dev *dev) if (!dev->setkeycode) dev->setkeycode = input_default_setkeycode; - dev_set_name(&dev->dev, "input%ld", - (unsigned long) atomic_inc_return(&input_no) - 1); - error = device_add(&dev->dev); if (error) goto err_free_vals; diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 134c3b404a54..a2e758d27584 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -786,10 +786,17 @@ static int pxa27x_keypad_probe(struct platform_device *pdev) input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); input_set_capability(input_dev, EV_MSC, MSC_SCAN); - if (pdata) + if (pdata) { error = pxa27x_keypad_build_keycode(keypad); - else + } else { error = pxa27x_keypad_build_keycode_from_dt(keypad); + /* + * Data that we get from DT resides in dynamically + * allocated memory so we need to update our pdata + * pointer. + */ + pdata = keypad->pdata; + } if (error) { dev_err(&pdev->dev, "failed to build keycode\n"); goto failed_put_clk; diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index 082684e7f390..9365535ba7f1 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -351,7 +351,9 @@ static void cm109_urb_irq_callback(struct urb *urb) if (status) { if (status == -ESHUTDOWN) return; - dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); + dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", + __func__, status); + goto out; } /* Special keys */ @@ -418,8 +420,12 @@ static void cm109_urb_ctl_callback(struct urb *urb) dev->ctl_data->byte[2], dev->ctl_data->byte[3]); - if (status) - dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); + if (status) { + if (status == -ESHUTDOWN) + return; + dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", + __func__, status); + } spin_lock(&dev->ctl_submit_lock); @@ -427,7 +433,7 @@ static void cm109_urb_ctl_callback(struct urb *urb) if (likely(!dev->shutdown)) { - if (dev->buzzer_pending) { + if (dev->buzzer_pending || status) { dev->buzzer_pending = 0; dev->ctl_urb_pending = 1; cm109_submit_buzz_toggle(dev); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 7c5d72a6a26a..83658472ad25 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -103,6 +103,7 @@ static const struct alps_model_info alps_model_data[] = { /* Dell Latitude E5500, E6400, E6500, Precision M4400 */ { { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, + { { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_DUALPOINT }, /* Dell XT2 */ { { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ { { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 78e4de42efaa..52c9ebf94729 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -223,21 +223,26 @@ static int i8042_flush(void) { unsigned long flags; unsigned char data, str; - int i = 0; + int count = 0; + int retval = 0; spin_lock_irqsave(&i8042_lock, flags); - while (((str = i8042_read_status()) & I8042_STR_OBF) && (i < I8042_BUFFER_SIZE)) { - udelay(50); - data = i8042_read_data(); - i++; - dbg("%02x <- i8042 (flush, %s)\n", - data, str & I8042_STR_AUXDATA ? "aux" : "kbd"); + while ((str = i8042_read_status()) & I8042_STR_OBF) { + if (count++ < I8042_BUFFER_SIZE) { + udelay(50); + data = i8042_read_data(); + dbg("%02x <- i8042 (flush, %s)\n", + data, str & I8042_STR_AUXDATA ? "aux" : "kbd"); + } else { + retval = -EIO; + break; + } } spin_unlock_irqrestore(&i8042_lock, flags); - return i; + return retval; } /* @@ -849,7 +854,7 @@ static int __init i8042_check_aux(void) static int i8042_controller_check(void) { - if (i8042_flush() == I8042_BUFFER_SIZE) { + if (i8042_flush()) { pr_err("No controller found\n"); return -ENODEV; } diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 79b69ea47f74..e53416a4d7f3 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -1031,6 +1031,7 @@ static void wacom_destroy_leds(struct wacom *wacom) } static enum power_supply_property wacom_battery_props[] = { + POWER_SUPPLY_PROP_SCOPE, POWER_SUPPLY_PROP_CAPACITY }; @@ -1042,6 +1043,9 @@ static int wacom_battery_get_property(struct power_supply *psy, int ret = 0; switch (psp) { + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_DEVICE; + break; case POWER_SUPPLY_PROP_CAPACITY: val->intval = wacom->wacom_wac.battery_capacity * 100 / 31; diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index b2aa503c16b1..c59b797eeafa 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -2054,6 +2054,12 @@ static const struct wacom_features wacom_features_0x101 = static const struct wacom_features wacom_features_0x10D = { "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x10E = + { "Wacom ISDv4 10E", WACOM_PKGLEN_MTTPC, 27760, 15694, 255, + 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x10F = + { "Wacom ISDv4 10F", WACOM_PKGLEN_MTTPC, 27760, 15694, 255, + 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x4001 = { "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -2248,6 +2254,8 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x100) }, { USB_DEVICE_WACOM(0x101) }, { USB_DEVICE_WACOM(0x10D) }, + { USB_DEVICE_WACOM(0x10E) }, + { USB_DEVICE_WACOM(0x10F) }, { USB_DEVICE_WACOM(0x300) }, { USB_DEVICE_WACOM(0x301) }, { USB_DEVICE_WACOM(0x304) }, diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index be12fbfcae10..1ea75236a15f 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -552,9 +552,8 @@ static void __ref enable_slot(struct acpiphp_slot *slot) struct acpiphp_func *func; int max, pass; LIST_HEAD(add_list); - int nr_found; - nr_found = acpiphp_rescan_slot(slot); + acpiphp_rescan_slot(slot); max = acpiphp_max_busnr(bus); for (pass = 0; pass < 2; pass++) { list_for_each_entry(dev, &bus->devices, bus_list) { @@ -574,9 +573,6 @@ static void __ref enable_slot(struct acpiphp_slot *slot) } } __pci_bus_assign_resources(bus, &add_list, NULL); - /* Nothing more to do here if there are no new devices on this bus. */ - if (!nr_found && (slot->flags & SLOT_ENABLED)) - return; acpiphp_sanitize_bus(bus); acpiphp_set_hpp_values(bus); diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 408a42ef787a..f0d432c139d0 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -771,6 +771,8 @@ static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long static int aac_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) { struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg); } diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 5cbc4bb1b395..df5e961484e1 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -105,8 +105,11 @@ static int scatter_elem_sz_prev = SG_SCATTER_SZ; static int sg_add(struct device *, struct class_interface *); static void sg_remove(struct device *, struct class_interface *); +static DEFINE_SPINLOCK(sg_open_exclusive_lock); + static DEFINE_IDR(sg_index_idr); -static DEFINE_RWLOCK(sg_index_lock); +static DEFINE_RWLOCK(sg_index_lock); /* Also used to lock + file descriptor list for device */ static struct class_interface sg_interface = { .add_dev = sg_add, @@ -143,7 +146,8 @@ typedef struct sg_request { /* SG_MAX_QUEUE requests outstanding per file */ } Sg_request; typedef struct sg_fd { /* holds the state of a file descriptor */ - struct list_head sfd_siblings; /* protected by sfd_lock of device */ + /* sfd_siblings is protected by sg_index_lock */ + struct list_head sfd_siblings; struct sg_device *parentdp; /* owning device */ wait_queue_head_t read_wait; /* queue read until command done */ rwlock_t rq_list_lock; /* protect access to list in req_arr */ @@ -166,12 +170,13 @@ typedef struct sg_fd { /* holds the state of a file descriptor */ typedef struct sg_device { /* holds the state of each scsi generic device */ struct scsi_device *device; + wait_queue_head_t o_excl_wait; /* queue open() when O_EXCL in use */ int sg_tablesize; /* adapter's max scatter-gather table size */ u32 index; /* device index number */ - spinlock_t sfd_lock; /* protect file descriptor list for device */ + /* sfds is protected by sg_index_lock */ struct list_head sfds; - struct rw_semaphore o_sem; /* exclude open should hold this rwsem */ volatile char detached; /* 0->attached, 1->detached pending removal */ + /* exclude protected by sg_open_exclusive_lock */ char exclude; /* opened for exclusive access */ char sgdebug; /* 0->off, 1->sense, 9->dump dev, 10-> all devs */ struct gendisk *disk; @@ -220,14 +225,35 @@ static int sg_allow_access(struct file *filp, unsigned char *cmd) return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE); } +static int get_exclude(Sg_device *sdp) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&sg_open_exclusive_lock, flags); + ret = sdp->exclude; + spin_unlock_irqrestore(&sg_open_exclusive_lock, flags); + return ret; +} + +static int set_exclude(Sg_device *sdp, char val) +{ + unsigned long flags; + + spin_lock_irqsave(&sg_open_exclusive_lock, flags); + sdp->exclude = val; + spin_unlock_irqrestore(&sg_open_exclusive_lock, flags); + return val; +} + static int sfds_list_empty(Sg_device *sdp) { unsigned long flags; int ret; - spin_lock_irqsave(&sdp->sfd_lock, flags); + read_lock_irqsave(&sg_index_lock, flags); ret = list_empty(&sdp->sfds); - spin_unlock_irqrestore(&sdp->sfd_lock, flags); + read_unlock_irqrestore(&sg_index_lock, flags); return ret; } @@ -239,6 +265,7 @@ sg_open(struct inode *inode, struct file *filp) struct request_queue *q; Sg_device *sdp; Sg_fd *sfp; + int res; int retval; nonseekable_open(inode, filp); @@ -267,52 +294,54 @@ sg_open(struct inode *inode, struct file *filp) goto error_out; } - if ((flags & O_EXCL) && (O_RDONLY == (flags & O_ACCMODE))) { - retval = -EPERM; /* Can't lock it with read only access */ - goto error_out; - } - if (flags & O_NONBLOCK) { - if (flags & O_EXCL) { - if (!down_write_trylock(&sdp->o_sem)) { - retval = -EBUSY; - goto error_out; - } - } else { - if (!down_read_trylock(&sdp->o_sem)) { - retval = -EBUSY; - goto error_out; - } + if (flags & O_EXCL) { + if (O_RDONLY == (flags & O_ACCMODE)) { + retval = -EPERM; /* Can't lock it with read only access */ + goto error_out; + } + if (!sfds_list_empty(sdp) && (flags & O_NONBLOCK)) { + retval = -EBUSY; + goto error_out; + } + res = wait_event_interruptible(sdp->o_excl_wait, + ((!sfds_list_empty(sdp) || get_exclude(sdp)) ? 0 : set_exclude(sdp, 1))); + if (res) { + retval = res; /* -ERESTARTSYS because signal hit process */ + goto error_out; + } + } else if (get_exclude(sdp)) { /* some other fd has an exclusive lock on dev */ + if (flags & O_NONBLOCK) { + retval = -EBUSY; + goto error_out; + } + res = wait_event_interruptible(sdp->o_excl_wait, !get_exclude(sdp)); + if (res) { + retval = res; /* -ERESTARTSYS because signal hit process */ + goto error_out; } - } else { - if (flags & O_EXCL) - down_write(&sdp->o_sem); - else - down_read(&sdp->o_sem); } - /* Since write lock is held, no need to check sfd_list */ - if (flags & O_EXCL) - sdp->exclude = 1; /* used by release lock */ - + if (sdp->detached) { + retval = -ENODEV; + goto error_out; + } if (sfds_list_empty(sdp)) { /* no existing opens on this device */ sdp->sgdebug = 0; q = sdp->device->request_queue; sdp->sg_tablesize = queue_max_segments(q); } - sfp = sg_add_sfp(sdp, dev); - if (!IS_ERR(sfp)) + if ((sfp = sg_add_sfp(sdp, dev))) filp->private_data = sfp; - /* retval is already provably zero at this point because of the - * check after retval = scsi_autopm_get_device(sdp->device)) - */ else { - retval = PTR_ERR(sfp); - if (flags & O_EXCL) { - sdp->exclude = 0; /* undo if error */ - up_write(&sdp->o_sem); - } else - up_read(&sdp->o_sem); + set_exclude(sdp, 0); /* undo if error */ + wake_up_interruptible(&sdp->o_excl_wait); + } + retval = -ENOMEM; + goto error_out; + } + retval = 0; error_out: + if (retval) { scsi_autopm_put_device(sdp->device); sdp_put: scsi_device_put(sdp->device); @@ -329,18 +358,13 @@ sg_release(struct inode *inode, struct file *filp) { Sg_device *sdp; Sg_fd *sfp; - int excl; if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name)); - excl = sdp->exclude; - sdp->exclude = 0; - if (excl) - up_write(&sdp->o_sem); - else - up_read(&sdp->o_sem); + set_exclude(sdp, 0); + wake_up_interruptible(&sdp->o_excl_wait); scsi_autopm_put_device(sdp->device); kref_put(&sfp->f_ref, sg_remove_sfp); @@ -1391,9 +1415,8 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) disk->first_minor = k; sdp->disk = disk; sdp->device = scsidp; - spin_lock_init(&sdp->sfd_lock); INIT_LIST_HEAD(&sdp->sfds); - init_rwsem(&sdp->o_sem); + init_waitqueue_head(&sdp->o_excl_wait); sdp->sg_tablesize = queue_max_segments(q); sdp->index = k; kref_init(&sdp->d_ref); @@ -1526,13 +1549,11 @@ static void sg_remove(struct device *cl_dev, struct class_interface *cl_intf) /* Need a write lock to set sdp->detached. */ write_lock_irqsave(&sg_index_lock, iflags); - spin_lock(&sdp->sfd_lock); sdp->detached = 1; list_for_each_entry(sfp, &sdp->sfds, sfd_siblings) { wake_up_interruptible(&sfp->read_wait); kill_fasync(&sfp->async_qp, SIGPOLL, POLL_HUP); } - spin_unlock(&sdp->sfd_lock); write_unlock_irqrestore(&sg_index_lock, iflags); sysfs_remove_link(&scsidp->sdev_gendev.kobj, "generic"); @@ -2043,7 +2064,7 @@ sg_add_sfp(Sg_device * sdp, int dev) sfp = kzalloc(sizeof(*sfp), GFP_ATOMIC | __GFP_NOWARN); if (!sfp) - return ERR_PTR(-ENOMEM); + return NULL; init_waitqueue_head(&sfp->read_wait); rwlock_init(&sfp->rq_list_lock); @@ -2057,13 +2078,9 @@ sg_add_sfp(Sg_device * sdp, int dev) sfp->cmd_q = SG_DEF_COMMAND_Q; sfp->keep_orphan = SG_DEF_KEEP_ORPHAN; sfp->parentdp = sdp; - spin_lock_irqsave(&sdp->sfd_lock, iflags); - if (sdp->detached) { - spin_unlock_irqrestore(&sdp->sfd_lock, iflags); - return ERR_PTR(-ENODEV); - } + write_lock_irqsave(&sg_index_lock, iflags); list_add_tail(&sfp->sfd_siblings, &sdp->sfds); - spin_unlock_irqrestore(&sdp->sfd_lock, iflags); + write_unlock_irqrestore(&sg_index_lock, iflags); SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: sfp=0x%p\n", sfp)); if (unlikely(sg_big_buff != def_reserved_size)) sg_big_buff = def_reserved_size; @@ -2113,9 +2130,10 @@ static void sg_remove_sfp(struct kref *kref) struct sg_device *sdp = sfp->parentdp; unsigned long iflags; - spin_lock_irqsave(&sdp->sfd_lock, iflags); + write_lock_irqsave(&sg_index_lock, iflags); list_del(&sfp->sfd_siblings); - spin_unlock_irqrestore(&sdp->sfd_lock, iflags); + write_unlock_irqrestore(&sg_index_lock, iflags); + wake_up_interruptible(&sdp->o_excl_wait); INIT_WORK(&sfp->ew.work, sg_remove_sfp_usercontext); schedule_work(&sfp->ew.work); @@ -2502,7 +2520,7 @@ static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v) return 0; } -/* must be called while holding sg_index_lock and sfd_lock */ +/* must be called while holding sg_index_lock */ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) { int k, m, new_interface, blen, usg; @@ -2587,26 +2605,22 @@ static int sg_proc_seq_show_debug(struct seq_file *s, void *v) read_lock_irqsave(&sg_index_lock, iflags); sdp = it ? sg_lookup_dev(it->index) : NULL; - if (sdp) { - spin_lock(&sdp->sfd_lock); - if (!list_empty(&sdp->sfds)) { - struct scsi_device *scsidp = sdp->device; + if (sdp && !list_empty(&sdp->sfds)) { + struct scsi_device *scsidp = sdp->device; - seq_printf(s, " >>> device=%s ", sdp->disk->disk_name); - if (sdp->detached) - seq_printf(s, "detached pending close "); - else - seq_printf - (s, "scsi%d chan=%d id=%d lun=%d em=%d", - scsidp->host->host_no, - scsidp->channel, scsidp->id, - scsidp->lun, - scsidp->host->hostt->emulated); - seq_printf(s, " sg_tablesize=%d excl=%d\n", - sdp->sg_tablesize, sdp->exclude); - sg_proc_debug_helper(s, sdp); - } - spin_unlock(&sdp->sfd_lock); + seq_printf(s, " >>> device=%s ", sdp->disk->disk_name); + if (sdp->detached) + seq_printf(s, "detached pending close "); + else + seq_printf + (s, "scsi%d chan=%d id=%d lun=%d em=%d", + scsidp->host->host_no, + scsidp->channel, scsidp->id, + scsidp->lun, + scsidp->host->hostt->emulated); + seq_printf(s, " sg_tablesize=%d excl=%d\n", + sdp->sg_tablesize, get_exclude(sdp)); + sg_proc_debug_helper(s, sdp); } read_unlock_irqrestore(&sg_index_lock, iflags); return 0; diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c index f91bc1fdd895..639ba96adb36 100644 --- a/drivers/staging/bcm/Bcmchar.c +++ b/drivers/staging/bcm/Bcmchar.c @@ -1960,6 +1960,7 @@ cntrlEnd: BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Called IOCTL_BCM_GET_DEVICE_DRIVER_INFO\n"); + memset(&DevInfo, 0, sizeof(DevInfo)); DevInfo.MaxRDMBufferSize = BUFFER_4K; DevInfo.u32DSDStartOffset = EEPROM_CALPARAM_START; DevInfo.u32RxAlignmentCorrection = 0; diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c index 6ccb64fb0786..6ce0af9977d8 100644 --- a/drivers/staging/ozwpan/ozcdev.c +++ b/drivers/staging/ozwpan/ozcdev.c @@ -155,6 +155,9 @@ static ssize_t oz_cdev_write(struct file *filp, const char __user *buf, struct oz_app_hdr *app_hdr; struct oz_serial_ctx *ctx; + if (count > sizeof(ei->data) - sizeof(*elt) - sizeof(*app_hdr)) + return -EINVAL; + spin_lock_bh(&g_cdev.lock); pd = g_cdev.active_pd; if (pd) diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c index 23db32f07fd5..a10cdb17038b 100644 --- a/drivers/staging/sb105x/sb_pci_mp.c +++ b/drivers/staging/sb105x/sb_pci_mp.c @@ -1063,7 +1063,7 @@ static int mp_wait_modem_status(struct sb_uart_state *state, unsigned long arg) static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt) { - struct serial_icounter_struct icount; + struct serial_icounter_struct icount = {}; struct sb_uart_icount cnow; struct sb_uart_port *port = state->port; diff --git a/drivers/staging/wlags49_h2/wl_priv.c b/drivers/staging/wlags49_h2/wl_priv.c index c97e0e154d28..7e10dcdc3090 100644 --- a/drivers/staging/wlags49_h2/wl_priv.c +++ b/drivers/staging/wlags49_h2/wl_priv.c @@ -570,6 +570,7 @@ int wvlan_uil_put_info(struct uilreq *urq, struct wl_private *lp) ltv_t *pLtv; bool_t ltvAllocated = FALSE; ENCSTRCT sEncryption; + size_t len; #ifdef USE_WDS hcf_16 hcfPort = HCF_PORT_0; @@ -686,7 +687,8 @@ int wvlan_uil_put_info(struct uilreq *urq, struct wl_private *lp) break; case CFG_CNF_OWN_NAME: memset(lp->StationName, 0, sizeof(lp->StationName)); - memcpy((void *)lp->StationName, (void *)&pLtv->u.u8[2], (size_t)pLtv->u.u16[0]); + len = min_t(size_t, pLtv->u.u16[0], sizeof(lp->StationName)); + strlcpy(lp->StationName, &pLtv->u.u8[2], len); pLtv->u.u16[0] = CNV_INT_TO_LITTLE(pLtv->u.u16[0]); break; case CFG_CNF_LOAD_BALANCING: @@ -1783,6 +1785,7 @@ int wvlan_set_station_nickname(struct net_device *dev, { struct wl_private *lp = wl_priv(dev); unsigned long flags; + size_t len; int ret = 0; /*------------------------------------------------------------------------*/ @@ -1793,8 +1796,8 @@ int wvlan_set_station_nickname(struct net_device *dev, wl_lock(lp, &flags); memset(lp->StationName, 0, sizeof(lp->StationName)); - - memcpy(lp->StationName, extra, wrqu->data.length); + len = min_t(size_t, wrqu->data.length, sizeof(lp->StationName)); + strlcpy(lp->StationName, extra, len); /* Commit the adapter parameters */ wl_apply(lp); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index d067285a2d20..6b0f75eac8a2 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1499,7 +1499,7 @@ static void atmel_set_ops(struct uart_port *port) /* * Get ip name usart or uart */ -static int atmel_get_ip_name(struct uart_port *port) +static void atmel_get_ip_name(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); int name = UART_GET_IP_NAME(port); @@ -1518,10 +1518,7 @@ static int atmel_get_ip_name(struct uart_port *port) atmel_port->is_usart = false; } else { dev_err(port->dev, "Not supported ip name, set to uart\n"); - return -EINVAL; } - - return 0; } /* @@ -2405,9 +2402,7 @@ static int atmel_serial_probe(struct platform_device *pdev) /* * Get port name of usart or uart */ - ret = atmel_get_ip_name(&port->uart); - if (ret < 0) - goto err_add_port; + atmel_get_ip_name(&port->uart); return 0; diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index ba475632c5fa..0e808cf91d97 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -642,16 +642,29 @@ static int uio_mmap_physical(struct vm_area_struct *vma) { struct uio_device *idev = vma->vm_private_data; int mi = uio_find_mem_index(vma); + struct uio_mem *mem; if (mi < 0) return -EINVAL; + mem = idev->info->mem + mi; - vma->vm_ops = &uio_physical_vm_ops; + if (vma->vm_end - vma->vm_start > mem->size) + return -EINVAL; + vma->vm_ops = &uio_physical_vm_ops; vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + /* + * We cannot use the vm_iomap_memory() helper here, + * because vma->vm_pgoff is the map index we looked + * up above in uio_find_mem_index(), rather than an + * actual page offset into the mmap. + * + * So we just do the physical mmap without a page + * offset. + */ return remap_pfn_range(vma, vma->vm_start, - idev->info->mem[mi].addr >> PAGE_SHIFT, + mem->addr >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot); } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c45f9c0a1b34..b21d553c245b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -904,6 +904,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, /* Crucible Devices */ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1b8af461b522..a7019d1e3058 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1307,3 +1307,9 @@ * Manufacturer: Crucible Technologies */ #define FTDI_CT_COMET_PID 0x8e08 + +/* + * Product: Z3X Box + * Manufacturer: Smart GSM Team + */ +#define FTDI_Z3X_PID 0x0011 diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index bedf8e47713b..1e6de4cd079d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -4,11 +4,6 @@ * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2003 IBM Corp. * - * Copyright (C) 2009, 2013 Frank Schäfer <fschaefer.oss@googlemail.com> - * - fixes, improvements and documentation for the baud rate encoding methods - * Copyright (C) 2013 Reinhard Max <max@suse.de> - * - fixes and improvements for the divisor based baud rate encoding method - * * Original driver for 2.2.x by anonymous * * This program is free software; you can redistribute it and/or @@ -134,18 +129,10 @@ MODULE_DEVICE_TABLE(usb, id_table); enum pl2303_type { - type_0, /* H version ? */ - type_1, /* H version ? */ - HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */ - HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */ - TB, /* TB version */ - HX_CLONE, /* Cheap and less functional clone of the HX chip */ + type_0, /* don't know the difference between type 0 and */ + type_1, /* type 1, until someone from prolific tells us... */ + HX, /* HX version of the pl2303 chip */ }; -/* - * NOTE: don't know the difference between type 0 and type 1, - * until someone from Prolific tells us... - * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants - */ struct pl2303_serial_private { enum pl2303_type type; @@ -185,7 +172,6 @@ static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; enum pl2303_type type = type_0; - char *type_str = "unknown (treating as type_0)"; unsigned char *buf; spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); @@ -198,53 +184,15 @@ static int pl2303_startup(struct usb_serial *serial) return -ENOMEM; } - if (serial->dev->descriptor.bDeviceClass == 0x02) { + if (serial->dev->descriptor.bDeviceClass == 0x02) type = type_0; - type_str = "type_0"; - } else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) { - /* - * NOTE: The bcdDevice version is the only difference between - * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB - */ - if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) { - /* Check if the device is a clone */ - pl2303_vendor_read(0x9494, 0, serial, buf); - /* - * NOTE: Not sure if this read is really needed. - * The HX returns 0x00, the clone 0x02, but the Windows - * driver seems to ignore the value and continues. - */ - pl2303_vendor_write(0x0606, 0xaa, serial); - pl2303_vendor_read(0x8686, 0, serial, buf); - if (buf[0] != 0xaa) { - type = HX_CLONE; - type_str = "X/HX clone (limited functionality)"; - } else { - type = HX_TA; - type_str = "X/HX/TA"; - } - pl2303_vendor_write(0x0606, 0x00, serial); - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x400) { - type = HXD_EA_RA_SA; - type_str = "HXD/EA/RA/SA"; - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x500) { - type = TB; - type_str = "TB"; - } else { - dev_info(&serial->interface->dev, - "unknown/unsupported device type\n"); - kfree(spriv); - kfree(buf); - return -ENODEV; - } - } else if (serial->dev->descriptor.bDeviceClass == 0x00 - || serial->dev->descriptor.bDeviceClass == 0xFF) { + else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) + type = HX; + else if (serial->dev->descriptor.bDeviceClass == 0x00) type = type_1; - type_str = "type_1"; - } - dev_dbg(&serial->interface->dev, "device type: %s\n", type_str); + else if (serial->dev->descriptor.bDeviceClass == 0xFF) + type = type_1; + dev_dbg(&serial->interface->dev, "device type: %d\n", type); spriv->type = type; usb_set_serial_data(serial, spriv); @@ -259,10 +207,10 @@ static int pl2303_startup(struct usb_serial *serial) pl2303_vendor_read(0x8383, 0, serial, buf); pl2303_vendor_write(0, 1, serial); pl2303_vendor_write(1, 0, serial); - if (type == type_0 || type == type_1) - pl2303_vendor_write(2, 0x24, serial); - else + if (type == HX) pl2303_vendor_write(2, 0x44, serial); + else + pl2303_vendor_write(2, 0x24, serial); kfree(buf); return 0; @@ -316,174 +264,65 @@ static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) return retval; } -static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type, - u8 buf[4]) +static void pl2303_encode_baudrate(struct tty_struct *tty, + struct usb_serial_port *port, + u8 buf[4]) { - /* - * NOTE: Only the values defined in baud_sup are supported ! - * => if unsupported values are set, the PL2303 uses 9600 baud instead - * => HX clones just don't work at unsupported baud rates < 115200 baud, - * for baud rates > 115200 they run at 115200 baud - */ const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600, - 4800, 7200, 9600, 14400, 19200, 28800, 38400, - 57600, 115200, 230400, 460800, 614400, 921600, - 1228800, 2457600, 3000000, 6000000, 12000000 }; + 4800, 7200, 9600, 14400, 19200, 28800, 38400, + 57600, 115200, 230400, 460800, 500000, 614400, + 921600, 1228800, 2457600, 3000000, 6000000 }; + + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + int baud; + int i; + /* - * NOTE: With the exception of type_0/1 devices, the following - * additional baud rates are supported (tested with HX rev. 3A only): - * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800, - * 403200, 806400. (*: not HX and HX clones) - * - * Maximum values: HXD, TB: 12000000; HX, TA: 6000000; - * type_0+1: 1228800; RA: 921600; HX clones, SA: 115200 - * - * As long as we are not using this encoding method for anything else - * than the type_0+1, HX and HX clone chips, there is no point in - * complicating the code to support them. + * NOTE: Only the values defined in baud_sup are supported! + * => if unsupported values are set, the PL2303 seems to use + * 9600 baud (at least my PL2303X always does) */ - int i; + baud = tty_get_baud_rate(tty); + dev_dbg(&port->dev, "baud requested = %d\n", baud); + if (!baud) + return; /* Set baudrate to nearest supported value */ for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) { if (baud_sup[i] > baud) break; } + if (i == ARRAY_SIZE(baud_sup)) baud = baud_sup[i - 1]; else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1])) baud = baud_sup[i - 1]; else baud = baud_sup[i]; - /* Respect the chip type specific baud rate limits */ - /* - * FIXME: as long as we don't know how to distinguish between the - * HXD, EA, RA, and SA chip variants, allow the max. value of 12M. - */ - if (type == HX_TA) - baud = min_t(int, baud, 6000000); - else if (type == type_0 || type == type_1) - baud = min_t(int, baud, 1228800); - else if (type == HX_CLONE) - baud = min_t(int, baud, 115200); - /* Direct (standard) baud rate encoding method */ - put_unaligned_le32(baud, buf); - - return baud; -} -static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type, - u8 buf[4]) -{ - /* - * Divisor based baud rate encoding method - * - * NOTE: HX clones do NOT support this method. - * It's not clear if the type_0/1 chips support it. - * - * divisor = 12MHz * 32 / baudrate = 2^A * B - * - * with - * - * A = buf[1] & 0x0e - * B = buf[0] + (buf[1] & 0x01) << 8 - * - * Special cases: - * => 8 < B < 16: device seems to work not properly - * => B <= 8: device uses the max. value B = 512 instead - */ - unsigned int A, B; + /* type_0, type_1 only support up to 1228800 baud */ + if (spriv->type != HX) + baud = min_t(int, baud, 1228800); - /* - * NOTE: The Windows driver allows maximum baud rates of 110% of the - * specified maximium value. - * Quick tests with early (2004) HX (rev. A) chips suggest, that even - * higher baud rates (up to the maximum of 24M baud !) are working fine, - * but that should really be tested carefully in "real life" scenarios - * before removing the upper limit completely. - * Baud rates smaller than the specified 75 baud are definitely working - * fine. - */ - if (type == type_0 || type == type_1) - baud = min_t(int, baud, 1228800 * 1.1); - else if (type == HX_TA) - baud = min_t(int, baud, 6000000 * 1.1); - else if (type == HXD_EA_RA_SA) - /* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */ - /* - * FIXME: as long as we don't know how to distinguish between - * these chip variants, allow the max. of these values - */ - baud = min_t(int, baud, 12000000 * 1.1); - else if (type == TB) - baud = min_t(int, baud, 12000000 * 1.1); - /* Determine factors A and B */ - A = 0; - B = 12000000 * 32 / baud; /* 12MHz */ - B <<= 1; /* Add one bit for rounding */ - while (B > (512 << 1) && A <= 14) { - A += 2; - B >>= 2; - } - if (A > 14) { /* max. divisor = min. baudrate reached */ - A = 14; - B = 512; - /* => ~45.78 baud */ + if (baud <= 115200) { + put_unaligned_le32(baud, buf); } else { - B = (B + 1) >> 1; /* Round the last bit */ - } - /* Handle special cases */ - if (B == 512) - B = 0; /* also: 1 to 8 */ - else if (B < 16) /* - * NOTE: With the current algorithm this happens - * only for A=0 and means that the min. divisor - * (respectively: the max. baudrate) is reached. + * Apparently the formula for higher speeds is: + * baudrate = 12M * 32 / (2^buf[1]) / buf[0] */ - B = 16; /* => 24 MBaud */ - /* Encode the baud rate */ - buf[3] = 0x80; /* Select divisor encoding method */ - buf[2] = 0; - buf[1] = (A & 0x0e); /* A */ - buf[1] |= ((B & 0x100) >> 8); /* MSB of B */ - buf[0] = B & 0xff; /* 8 LSBs of B */ - /* Calculate the actual/resulting baud rate */ - if (B <= 8) - B = 512; - baud = 12000000 * 32 / ((1 << A) * B); - - return baud; -} - -static void pl2303_encode_baudrate(struct tty_struct *tty, - struct usb_serial_port *port, - enum pl2303_type type, - u8 buf[4]) -{ - int baud; + unsigned tmp = 12000000 * 32 / baud; + buf[3] = 0x80; + buf[2] = 0; + buf[1] = (tmp >= 256); + while (tmp >= 256) { + tmp >>= 2; + buf[1] <<= 1; + } + buf[0] = tmp; + } - baud = tty_get_baud_rate(tty); - dev_dbg(&port->dev, "baud requested = %d\n", baud); - if (!baud) - return; - /* - * There are two methods for setting/encoding the baud rate - * 1) Direct method: encodes the baud rate value directly - * => supported by all chip types - * 2) Divisor based method: encodes a divisor to a base value (12MHz*32) - * => not supported by HX clones (and likely type_0/1 chips) - * - * NOTE: Although the divisor based baud rate encoding method is much - * more flexible, some of the standard baud rate values can not be - * realized exactly. But the difference is very small (max. 0.2%) and - * the device likely uses the same baud rate generator for both methods - * so that there is likley no difference. - */ - if (type == type_0 || type == type_1 || type == HX_CLONE) - baud = pl2303_baudrate_encode_direct(baud, type, buf); - else - baud = pl2303_baudrate_encode_divisor(baud, type, buf); /* Save resulting baud rate */ tty_encode_baud_rate(tty, baud, baud); dev_dbg(&port->dev, "baud set = %d\n", baud); @@ -540,8 +379,8 @@ static void pl2303_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "data bits = %d\n", buf[6]); } - /* For reference: buf[0]:buf[3] baud rate value */ - pl2303_encode_baudrate(tty, port, spriv->type, buf); + /* For reference buf[0]:buf[3] baud rate value */ + pl2303_encode_baudrate(tty, port, &buf[0]); /* For reference buf[4]=0 is 1 stop bits */ /* For reference buf[4]=1 is 1.5 stop bits */ @@ -618,10 +457,10 @@ static void pl2303_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf); if (C_CRTSCTS(tty)) { - if (spriv->type == type_0 || spriv->type == type_1) - pl2303_vendor_write(0x0, 0x41, serial); - else + if (spriv->type == HX) pl2303_vendor_write(0x0, 0x61, serial); + else + pl2303_vendor_write(0x0, 0x41, serial); } else { pl2303_vendor_write(0x0, 0x0, serial); } @@ -658,7 +497,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; - if (spriv->type == type_0 || spriv->type == type_1) { + if (spriv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); } else { @@ -833,7 +672,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 0, NULL, 0, 100); - /* NOTE: HX clones don't support sending breaks, -EPIPE is returned */ if (result) dev_err(&port->dev, "error sending break = %d\n", result); } diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index a54ccdc4d661..22ad85242e5b 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -361,37 +361,13 @@ void au1100fb_fb_rotate(struct fb_info *fbi, int angle) int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) { struct au1100fb_device *fbdev; - unsigned int len; - unsigned long start=0, off; fbdev = to_au1100fb_device(fbi); - if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) { - return -EINVAL; - } - - start = fbdev->fb_phys & PAGE_MASK; - len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len); - - off = vma->vm_pgoff << PAGE_SHIFT; - - if ((vma->vm_end - vma->vm_start + off) > len) { - return -EINVAL; - } - - off += start; - vma->vm_pgoff = off >> PAGE_SHIFT; - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6 - if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, - vma->vm_page_prot)) { - return -EAGAIN; - } - - return 0; + return vm_iomap_memory(vma, fbdev->fb_phys, fbdev->fb_len); } static struct fb_ops au1100fb_ops = diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c index 301224ecc950..1d02897d17f2 100644 --- a/drivers/video/au1200fb.c +++ b/drivers/video/au1200fb.c @@ -1233,34 +1233,13 @@ static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi) * method mainly to allow the use of the TLB streaming flag (CCA=6) */ static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma) - { - unsigned int len; - unsigned long start=0, off; struct au1200fb_device *fbdev = info->par; - if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) { - return -EINVAL; - } - - start = fbdev->fb_phys & PAGE_MASK; - len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len); - - off = vma->vm_pgoff << PAGE_SHIFT; - - if ((vma->vm_end - vma->vm_start + off) > len) { - return -EINVAL; - } - - off += start; - vma->vm_pgoff = off >> PAGE_SHIFT; - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); pgprot_val(vma->vm_page_prot) |= _CACHE_MASK; /* CCA=7 */ - return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); + return vm_iomap_memory(vma, fbdev->fb_phys, fbdev->fb_len); } static void set_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata) |