diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ata/libata-core.c | 94 | ||||
| -rw-r--r-- | drivers/ata/libata-scsi.c | 38 |
2 files changed, 130 insertions, 2 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 1528c7cc0089..97f31707b570 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2227,6 +2227,99 @@ static void ata_dev_config_sense_reporting(struct ata_device *dev) } } +static void ata_dev_config_zac(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + unsigned int err_mask; + u8 *identify_buf = ap->sector_buf; + int log_index = ATA_LOG_SATA_ID_DEV_DATA * 2, i, found = 0; + u16 log_pages; + + dev->zac_zones_optimal_open = U32_MAX; + dev->zac_zones_optimal_nonseq = U32_MAX; + dev->zac_zones_max_open = U32_MAX; + + /* + * Always set the 'ZAC' flag for Host-managed devices. + */ + if (dev->class == ATA_DEV_ZAC) + dev->flags |= ATA_DFLAG_ZAC; + else if (ata_id_zoned_cap(dev->id) == 0x01) + /* + * Check for host-aware devices. + */ + dev->flags |= ATA_DFLAG_ZAC; + + if (!(dev->flags & ATA_DFLAG_ZAC)) + return; + + /* + * Read Log Directory to figure out if IDENTIFY DEVICE log + * is supported. + */ + err_mask = ata_read_log_page(dev, ATA_LOG_DIRECTORY, + 0, ap->sector_buf, 1); + if (err_mask) { + ata_dev_info(dev, + "failed to get Log Directory Emask 0x%x\n", + err_mask); + return; + } + log_pages = get_unaligned_le16(&ap->sector_buf[log_index]); + if (log_pages == 0) { + ata_dev_warn(dev, + "ATA Identify Device Log not supported\n"); + return; + } + /* + * Read IDENTIFY DEVICE data log, page 0, to figure out + * if page 9 is supported. + */ + err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, 0, + identify_buf, 1); + if (err_mask) { + ata_dev_info(dev, + "failed to get Device Identify Log Emask 0x%x\n", + err_mask); + return; + } + log_pages = identify_buf[8]; + for (i = 0; i < log_pages; i++) { + if (identify_buf[9 + i] == ATA_LOG_ZONED_INFORMATION) { + found++; + break; + } + } + if (!found) { + ata_dev_warn(dev, + "ATA Zoned Information Log not supported\n"); + return; + } + + /* + * Read IDENTIFY DEVICE data log, page 9 (Zoned-device information) + */ + err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, + ATA_LOG_ZONED_INFORMATION, + identify_buf, 1); + if (!err_mask) { + u64 zoned_cap, opt_open, opt_nonseq, max_open; + + zoned_cap = get_unaligned_le64(&identify_buf[8]); + if ((zoned_cap >> 63)) + dev->zac_zoned_cap = (zoned_cap & 1); + opt_open = get_unaligned_le64(&identify_buf[24]); + if ((opt_open >> 63)) + dev->zac_zones_optimal_open = (u32)opt_open; + opt_nonseq = get_unaligned_le64(&identify_buf[32]); + if ((opt_nonseq >> 63)) + dev->zac_zones_optimal_nonseq = (u32)opt_nonseq; + max_open = get_unaligned_le64(&identify_buf[40]); + if ((max_open >> 63)) + dev->zac_zones_max_open = (u32)max_open; + } +} + /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure @@ -2450,6 +2543,7 @@ int ata_dev_configure(struct ata_device *dev) } } ata_dev_config_sense_reporting(dev); + ata_dev_config_zac(dev); dev->cdb_len = 16; } diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 96abd42c9985..b86af1416dce 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2144,6 +2144,7 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) */ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) { + int num_pages; const u8 pages[] = { 0x00, /* page 0x00, this page */ 0x80, /* page 0x80, unit serial no page */ @@ -2152,10 +2153,14 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) 0xb0, /* page 0xb0, block limits page */ 0xb1, /* page 0xb1, block device characteristics page */ 0xb2, /* page 0xb2, thin provisioning page */ + 0xb6, /* page 0xb6, zoned block device characteristics */ }; - rbuf[3] = sizeof(pages); /* number of supported VPD pages */ - memcpy(rbuf + 4, pages, sizeof(pages)); + num_pages = sizeof(pages); + if (!(args->dev->flags & ATA_DFLAG_ZAC)) + num_pages--; + rbuf[3] = num_pages; /* number of supported VPD pages */ + memcpy(rbuf + 4, pages, num_pages); return 0; } @@ -2343,6 +2348,26 @@ static unsigned int ata_scsiop_inq_b2(struct ata_scsi_args *args, u8 *rbuf) return 0; } +static unsigned int ata_scsiop_inq_b6(struct ata_scsi_args *args, u8 *rbuf) +{ + /* + * zbc-r05 SCSI Zoned Block device characteristics VPD page + */ + rbuf[1] = 0xb6; + rbuf[3] = 0x3C; + + /* + * URSWRZ bit is only meaningful for host-managed ZAC drives + */ + if (args->dev->zac_zoned_cap & 1) + rbuf[4] |= 1; + put_unaligned_be32(args->dev->zac_zones_optimal_open, &rbuf[8]); + put_unaligned_be32(args->dev->zac_zones_optimal_nonseq, &rbuf[12]); + put_unaligned_be32(args->dev->zac_zones_max_open, &rbuf[16]); + + return 0; +} + /** * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. @@ -2661,6 +2686,9 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) rbuf[14] |= 0x40; /* LBPRZ */ } } + if (ata_id_zoned_cap(args->id) || + args->dev->class == ATA_DEV_ZAC) + rbuf[12] = (1 << 4); /* RC_BASIS */ } return 0; } @@ -4046,6 +4074,12 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd) case 0xb2: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b2); break; + case 0xb6: + if (dev->flags & ATA_DFLAG_ZAC) { + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b6); + break; + } + /* Fallthrough */ default: ata_scsi_invalid_field(dev, cmd, 2); break; |