diff options
Diffstat (limited to 'drivers/usb')
45 files changed, 549 insertions, 316 deletions
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 0aa9e7d697a5..25dbd8c7aec7 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -239,6 +239,16 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, if (ifp->desc.bNumEndpoints >= num_ep) goto skip_to_next_endpoint_or_interface_descriptor; + /* Check for duplicate endpoint addresses */ + for (i = 0; i < ifp->desc.bNumEndpoints; ++i) { + if (ifp->endpoint[i].desc.bEndpointAddress == + d->bEndpointAddress) { + dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", + cfgno, inum, asnum, d->bEndpointAddress); + goto skip_to_next_endpoint_or_interface_descriptor; + } + } + endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; ++ifp->desc.bNumEndpoints; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1fa5c0f29c64..a56c75e09786 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -103,8 +103,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); static void hub_release(struct kref *kref); static int usb_reset_and_verify_device(struct usb_device *udev); -static void hub_usb3_port_prepare_disable(struct usb_hub *hub, - struct usb_port *port_dev); +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state); static inline char *portspeed(struct usb_hub *hub, int portstatus) { @@ -903,34 +902,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1, } /* - * USB-3 does not have a similar link state as USB-2 that will avoid negotiating - * a connection with a plugged-in cable but will signal the host when the cable - * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices - */ -static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) -{ - struct usb_port *port_dev = hub->ports[port1 - 1]; - struct usb_device *hdev = hub->hdev; - int ret = 0; - - if (!hub->error) { - if (hub_is_superspeed(hub->hdev)) { - hub_usb3_port_prepare_disable(hub, port_dev); - ret = hub_set_port_link_state(hub, port_dev->portnum, - USB_SS_PORT_LS_U3); - } else { - ret = usb_clear_port_feature(hdev, port1, - USB_PORT_FEAT_ENABLE); - } - } - if (port_dev->child && set_state) - usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); - if (ret && ret != -ENODEV) - dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); - return ret; -} - -/* * Disable a port and mark a logical connect-change event, so that some * time later hub_wq will disconnect() any existing usb_device on the port * and will re-enumerate if there actually is a device attached. @@ -4162,6 +4133,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, #endif /* CONFIG_PM */ +/* + * USB-3 does not have a similar link state as USB-2 that will avoid negotiating + * a connection with a plugged-in cable but will signal the host when the cable + * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices + */ +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *hdev = hub->hdev; + int ret = 0; + + if (!hub->error) { + if (hub_is_superspeed(hub->hdev)) { + hub_usb3_port_prepare_disable(hub, port_dev); + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U3); + } else { + ret = usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_ENABLE); + } + } + if (port_dev->child && set_state) + usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); + if (ret && ret != -ENODEV) + dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); + return ret; +} + /* USB 2.0 spec, 7.1.7.3 / fig 7-29: * diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index b95930f20d90..c55db4aa54d6 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3753,7 +3753,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, hs_ep->desc_list = dma_alloc_coherent(hsotg->dev, MAX_DMA_DESC_NUM_GENERIC * sizeof(struct dwc2_dma_desc), - &hs_ep->desc_list_dma, GFP_KERNEL); + &hs_ep->desc_list_dma, GFP_ATOMIC); if (!hs_ep->desc_list) { ret = -ENOMEM; goto error2; diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index a786256535b6..11fe68a4627b 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -247,8 +247,6 @@ MODULE_DEVICE_TABLE(of, dwc2_of_match_table); static void dwc2_get_device_property(struct dwc2_hsotg *hsotg, char *property, u8 size, u64 *value) { - u8 val8; - u16 val16; u32 val32; switch (size) { @@ -256,17 +254,7 @@ static void dwc2_get_device_property(struct dwc2_hsotg *hsotg, *value = device_property_read_bool(hsotg->dev, property); break; case 1: - if (device_property_read_u8(hsotg->dev, property, &val8)) - return; - - *value = val8; - break; case 2: - if (device_property_read_u16(hsotg->dev, property, &val16)) - return; - - *value = val16; - break; case 4: if (device_property_read_u32(hsotg->dev, property, &val32)) return; @@ -1100,13 +1088,13 @@ static void dwc2_set_gadget_dma(struct dwc2_hsotg *hsotg) /* Buffer DMA */ dwc2_set_param_bool(hsotg, &p->g_dma, false, "gadget-dma", - true, false, + dma_capable, false, dma_capable); /* DMA Descriptor */ dwc2_set_param_bool(hsotg, &p->g_dma_desc, false, "gadget-dma-desc", - p->g_dma, false, + !!hw->dma_desc_enable, false, !!hw->dma_desc_enable); } @@ -1130,8 +1118,14 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg, dwc2_set_param_bool(hsotg, &p->host_dma, false, "host-dma", - true, false, + dma_capable, false, dma_capable); + dwc2_set_param_host_rx_fifo_size(hsotg, + params->host_rx_fifo_size); + dwc2_set_param_host_nperio_tx_fifo_size(hsotg, + params->host_nperio_tx_fifo_size); + dwc2_set_param_host_perio_tx_fifo_size(hsotg, + params->host_perio_tx_fifo_size); } dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable); dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable); @@ -1140,12 +1134,6 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg, params->host_support_fs_ls_low_power); dwc2_set_param_enable_dynamic_fifo(hsotg, params->enable_dynamic_fifo); - dwc2_set_param_host_rx_fifo_size(hsotg, - params->host_rx_fifo_size); - dwc2_set_param_host_nperio_tx_fifo_size(hsotg, - params->host_nperio_tx_fifo_size); - dwc2_set_param_host_perio_tx_fifo_size(hsotg, - params->host_perio_tx_fifo_size); dwc2_set_param_max_transfer_size(hsotg, params->max_transfer_size); dwc2_set_param_max_packet_count(hsotg, diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index de5a8570be04..14b760209680 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -45,9 +45,7 @@ #define DWC3_XHCI_RESOURCES_NUM 2 #define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */ -#define DWC3_EVENT_SIZE 4 /* bytes */ -#define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */ -#define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM) +#define DWC3_EVENT_BUFFERS_SIZE 4096 #define DWC3_EVENT_TYPE_MASK 0xfe #define DWC3_EVENT_TYPE_DEV 0 @@ -311,9 +309,8 @@ #define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */ #define DWC3_DCFG_SUPERSPEED (4 << 0) #define DWC3_DCFG_HIGHSPEED (0 << 0) -#define DWC3_DCFG_FULLSPEED2 (1 << 0) +#define DWC3_DCFG_FULLSPEED (1 << 0) #define DWC3_DCFG_LOWSPEED (2 << 0) -#define DWC3_DCFG_FULLSPEED1 (3 << 0) #define DWC3_DCFG_NUMP_SHIFT 17 #define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f) @@ -405,9 +402,8 @@ #define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */ #define DWC3_DSTS_SUPERSPEED (4 << 0) #define DWC3_DSTS_HIGHSPEED (0 << 0) -#define DWC3_DSTS_FULLSPEED2 (1 << 0) +#define DWC3_DSTS_FULLSPEED (1 << 0) #define DWC3_DSTS_LOWSPEED (2 << 0) -#define DWC3_DSTS_FULLSPEED1 (3 << 0) /* Device Generic Command Register */ #define DWC3_DGCMD_SET_LMP 0x01 diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 29e80cc9b634..eb1b9cb3f9d1 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> +#include <linux/irq.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/platform_data/dwc3-omap.h> @@ -510,7 +511,7 @@ static int dwc3_omap_probe(struct platform_device *pdev) /* check the DMA Status */ reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); - + irq_set_status_flags(omap->irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt, dwc3_omap_interrupt_thread, IRQF_SHARED, "dwc3-omap", omap); @@ -531,7 +532,7 @@ static int dwc3_omap_probe(struct platform_device *pdev) } dwc3_omap_enable_irqs(omap); - + enable_irq(omap->irq); return 0; err2: @@ -552,6 +553,7 @@ static int dwc3_omap_remove(struct platform_device *pdev) extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb); extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb); dwc3_omap_disable_irqs(omap); + disable_irq(omap->irq); of_platform_depopulate(omap->dev); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 2b73339f286b..cce0a220b6b0 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -38,6 +38,7 @@ #define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa #define PCI_DEVICE_ID_INTEL_APL 0x5aaa #define PCI_DEVICE_ID_INTEL_KBP 0xa2b0 +#define PCI_DEVICE_ID_INTEL_GLK 0x31aa #define PCI_INTEL_BXT_DSM_UUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -73,16 +74,6 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) { struct platform_device *dwc3 = dwc->dwc3; struct pci_dev *pdev = dwc->pci; - int ret; - - struct property_entry sysdev_property[] = { - PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), - { }, - }; - - ret = platform_device_add_properties(dwc3, sysdev_property); - if (ret) - return ret; if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == PCI_DEVICE_ID_AMD_NL_USB) { @@ -105,6 +96,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"), PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"), PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"), + PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), { }, }; @@ -115,7 +107,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) int ret; struct property_entry properties[] = { - PROPERTY_ENTRY_STRING("dr-mode", "peripheral"), + PROPERTY_ENTRY_STRING("dr_mode", "peripheral"), + PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), { } }; @@ -167,6 +160,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"), PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"), PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"), + PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), { }, }; @@ -274,6 +268,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 4878d187c7d4..9bb1f8526f3e 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -39,18 +39,13 @@ static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep); static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req); -static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, - u32 len, u32 type, bool chain) +static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum, + dma_addr_t buf_dma, u32 len, u32 type, bool chain) { - struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; struct dwc3_ep *dep; - int ret; - dep = dwc->eps[epnum]; - if (dep->flags & DWC3_EP_BUSY) - return 0; trb = &dwc->ep0_trb[dep->trb_enqueue]; @@ -71,15 +66,23 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, trb->ctrl |= (DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_LST); - if (chain) + trace_dwc3_prepare_trb(dep, trb); +} + +static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_ep *dep; + int ret; + + dep = dwc->eps[epnum]; + if (dep->flags & DWC3_EP_BUSY) return 0; memset(¶ms, 0, sizeof(params)); params.param0 = upper_32_bits(dwc->ep0_trb_addr); params.param1 = lower_32_bits(dwc->ep0_trb_addr); - trace_dwc3_prepare_trb(dep, trb); - ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, ¶ms); if (ret < 0) return ret; @@ -280,8 +283,9 @@ void dwc3_ep0_out_start(struct dwc3 *dwc) complete(&dwc->ep0_in_setup); - ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8, + dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8, DWC3_TRBCTL_CONTROL_SETUP, false); + ret = dwc3_ep0_start_trans(dwc, 0); WARN_ON(ret < 0); } @@ -912,9 +916,9 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, dwc->ep0_next_event = DWC3_EP0_COMPLETE; - ret = dwc3_ep0_start_trans(dwc, epnum, - dwc->ctrl_req_addr, 0, - DWC3_TRBCTL_CONTROL_DATA, false); + dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr, + 0, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, epnum); WARN_ON(ret < 0); } } @@ -993,9 +997,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, req->direction = !!dep->number; if (req->request.length == 0) { - ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, dwc->ctrl_req_addr, 0, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, dep->number); } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && (dep->number == 0)) { u32 transfer_size = 0; @@ -1011,7 +1016,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, if (req->request.length > DWC3_EP0_BOUNCE_SIZE) { transfer_size = ALIGN(req->request.length - maxpacket, maxpacket); - ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma, transfer_size, DWC3_TRBCTL_CONTROL_DATA, @@ -1023,18 +1028,20 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, dwc->ep0_bounced = true; - ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, dwc->ep0_bounce_addr, transfer_size, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, dep->number); } else { ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request, dep->number); if (ret) return; - ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma, + dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma, req->request.length, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, dep->number); } WARN_ON(ret < 0); @@ -1048,8 +1055,9 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3 : DWC3_TRBCTL_CONTROL_STATUS2; - return dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, dwc->ctrl_req_addr, 0, type, false); + return dwc3_ep0_start_trans(dwc, dep->number); } static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index efddaf5d11d1..204c754cc647 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -180,11 +180,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, if (req->request.status == -EINPROGRESS) req->request.status = status; - if (dwc->ep0_bounced && dep->number == 0) + if (dwc->ep0_bounced && dep->number <= 1) dwc->ep0_bounced = false; - else - usb_gadget_unmap_request_by_dev(dwc->sysdev, - &req->request, req->direction); + + usb_gadget_unmap_request_by_dev(dwc->sysdev, + &req->request, req->direction); trace_dwc3_gadget_giveback(req); @@ -1720,7 +1720,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) reg |= DWC3_DCFG_LOWSPEED; break; case USB_SPEED_FULL: - reg |= DWC3_DCFG_FULLSPEED1; + reg |= DWC3_DCFG_FULLSPEED; break; case USB_SPEED_HIGH: reg |= DWC3_DCFG_HIGHSPEED; @@ -2232,9 +2232,14 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dep = dwc->eps[epnum]; - if (!(dep->flags & DWC3_EP_ENABLED) && - !(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) - return; + if (!(dep->flags & DWC3_EP_ENABLED)) { + if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) + return; + + /* Handle only EPCMDCMPLT when EP disabled */ + if (event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT) + return; + } if (epnum == 0 || epnum == 1) { dwc3_ep0_interrupt(dwc, event); @@ -2531,8 +2536,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) dwc->gadget.ep0->maxpacket = 64; dwc->gadget.speed = USB_SPEED_HIGH; break; - case DWC3_DSTS_FULLSPEED2: - case DWC3_DSTS_FULLSPEED1: + case DWC3_DSTS_FULLSPEED: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); dwc->gadget.ep0->maxpacket = 64; dwc->gadget.speed = USB_SPEED_FULL; diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 41ab61f9b6e0..002822d98fda 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1694,9 +1694,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) value = min(w_length, (u16) 1); break; - /* function drivers must handle get/set altsetting; if there's - * no get() method, we know only altsetting zero works. - */ + /* function drivers must handle get/set altsetting */ case USB_REQ_SET_INTERFACE: if (ctrl->bRequestType != USB_RECIP_INTERFACE) goto unknown; @@ -1705,7 +1703,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) f = cdev->config->interface[intf]; if (!f) break; - if (w_value && !f->set_alt) + + /* + * If there's no get_alt() method, we know only altsetting zero + * works. There is no need to check if set_alt() is not NULL + * as we check this in usb_add_function(). + */ + if (w_value && !f->get_alt) break; value = f->set_alt(f, w_index, w_value); if (value == USB_GADGET_DELAYED_STATUS) { diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index aab3fc1dbb94..5e746adc8a2d 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2091,8 +2091,8 @@ static int __ffs_data_do_entity(enum ffs_entity_type type, case FFS_STRING: /* - * Strings are indexed from 1 (0 is magic ;) reserved - * for languages list or some such) + * Strings are indexed from 1 (0 is reserved + * for languages list) */ if (*valuep > helper->ffs->strings_count) helper->ffs->strings_count = *valuep; @@ -2252,7 +2252,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, if (len < sizeof(*d) || d->bFirstInterfaceNumber >= ffs->interfaces_count || - !d->Reserved1) + d->Reserved1) return -EINVAL; for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i) if (d->Reserved2[i]) @@ -3666,6 +3666,7 @@ static void ffs_closed(struct ffs_data *ffs) { struct ffs_dev *ffs_obj; struct f_fs_opts *opts; + struct config_item *ci; ENTER(); ffs_dev_lock(); @@ -3689,8 +3690,11 @@ static void ffs_closed(struct ffs_data *ffs) || !atomic_read(&opts->func_inst.group.cg_item.ci_kref.refcount)) goto done; - unregister_gadget_item(ffs_obj->opts-> - func_inst.group.cg_item.ci_parent->ci_parent); + ci = opts->func_inst.group.cg_item.ci_parent->ci_parent; + ffs_dev_unlock(); + + unregister_gadget_item(ci); + return; done: ffs_dev_unlock(); } diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index 3151d2a0fe59..5f8139b8e601 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -593,7 +593,7 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) } status = usb_ep_enable(hidg->out_ep); if (status < 0) { - ERROR(cdev, "Enable IN endpoint FAILED!\n"); + ERROR(cdev, "Enable OUT endpoint FAILED!\n"); goto fail; } hidg->out_ep->driver_data = hidg; diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index e8f4102d19df..6bde4396927c 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -1126,7 +1126,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* data and/or status stage for control request */ } else if (dev->state == STATE_DEV_SETUP) { - /* IN DATA+STATUS caller makes len <= wLength */ + len = min_t(size_t, len, dev->setup_wLength); if (dev->setup_in) { retval = setup_req (dev->gadget->ep0, dev->req, len); if (retval == 0) { @@ -1734,10 +1734,12 @@ static struct usb_gadget_driver gadgetfs_driver = { * such as configuration notifications. */ -static int is_valid_config (struct usb_config_descriptor *config) +static int is_valid_config(struct usb_config_descriptor *config, + unsigned int total) { return config->bDescriptorType == USB_DT_CONFIG && config->bLength == USB_DT_CONFIG_SIZE + && total >= USB_DT_CONFIG_SIZE && config->bConfigurationValue != 0 && (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0 && (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0; @@ -1762,7 +1764,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) } spin_unlock_irq(&dev->lock); - if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) + if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) || + (len > PAGE_SIZE * 4)) return -EINVAL; /* we might need to change message format someday */ @@ -1786,7 +1789,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* full or low speed config */ dev->config = (void *) kbuf; total = le16_to_cpu(dev->config->wTotalLength); - if (!is_valid_config (dev->config) || total >= length) + if (!is_valid_config(dev->config, total) || + total > length - USB_DT_DEVICE_SIZE) goto fail; kbuf += total; length -= total; @@ -1795,10 +1799,13 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (kbuf [1] == USB_DT_CONFIG) { dev->hs_config = (void *) kbuf; total = le16_to_cpu(dev->hs_config->wTotalLength); - if (!is_valid_config (dev->hs_config) || total >= length) + if (!is_valid_config(dev->hs_config, total) || + total > length - USB_DT_DEVICE_SIZE) goto fail; kbuf += total; length -= total; + } else { + dev->hs_config = NULL; } /* could support multiple configs, using another encoding! */ @@ -1811,7 +1818,6 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) || dev->dev->bDescriptorType != USB_DT_DEVICE || dev->dev->bNumConfigurations != 1) goto fail; - dev->dev->bNumConfigurations = 1; dev->dev->bcdUSB = cpu_to_le16 (0x0200); /* triggers gadgetfs_bind(); then we can enumerate. */ diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 9483489080f6..0402177f93cd 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1317,7 +1317,11 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver) if (!ret) break; } - if (!ret && !udc->driver) + if (ret) + ret = -ENODEV; + else if (udc->driver) + ret = -EBUSY; + else goto found; } else { list_for_each_entry(udc, &udc_list, list) { diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 02b14e91ae6c..c60abe3a68f9 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -330,7 +330,7 @@ static void nuke(struct dummy *dum, struct dummy_ep *ep) /* caller must hold lock */ static void stop_activity(struct dummy *dum) { - struct dummy_ep *ep; + int i; /* prevent any more requests */ dum->address = 0; @@ -338,8 +338,8 @@ static void stop_activity(struct dummy *dum) /* The timer is left running so that outstanding URBs can fail */ /* nuke any pending requests first, so driver i/o is quiesced */ - list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list) - nuke(dum, ep); + for (i = 0; i < DUMMY_ENDPOINTS; ++i) + nuke(dum, &dum->ep[i]); /* driver now does any non-usb quiescing necessary */ } diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index be9e63836881..414e3c376dbb 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -43,7 +43,6 @@ struct at91_usbh_data { struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS]; u8 ports; /* number of ports on root hub */ u8 overcurrent_supported; - u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; u8 overcurrent_status[AT91_MAX_USBH_PORTS]; u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; }; @@ -266,8 +265,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int if (!valid_port(port)) return; - gpiod_set_value(pdata->vbus_pin[port], - pdata->vbus_pin_active_low[port] ^ enable); + gpiod_set_value(pdata->vbus_pin[port], enable); } static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) @@ -275,8 +273,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) if (!valid_port(port)) return -EINVAL; - return gpiod_get_value(pdata->vbus_pin[port]) ^ - pdata->vbus_pin_active_low[port]; + return gpiod_get_value(pdata->vbus_pin[port]); } /* @@ -533,18 +530,17 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) pdata->ports = ports; at91_for_each_port(i) { - pdata->vbus_pin[i] = devm_gpiod_get_optional(&pdev->dev, - "atmel,vbus-gpio", - GPIOD_IN); + if (i >= pdata->ports) + break; + + pdata->vbus_pin[i] = + devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus", + i, GPIOD_OUT_HIGH); if (IS_ERR(pdata->vbus_pin[i])) { err = PTR_ERR(pdata->vbus_pin[i]); dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err); continue; } - - pdata->vbus_pin_active_low[i] = gpiod_get_value(pdata->vbus_pin[i]); - - ohci_at91_usb_set_power(pdata, i, 1); } at91_for_each_port(i) { @@ -552,8 +548,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) break; pdata->overcurrent_pin[i] = - devm_gpiod_get_optional(&pdev->dev, - "atmel,oc-gpio", GPIOD_IN); + devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc", + i, GPIOD_IN); if (IS_ERR(pdata->overcurrent_pin[i])) { err = PTR_ERR(pdata->overcurrent_pin[i]); dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 321de2e0161b..8414ed2a02de 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -979,6 +979,40 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) xhci->devs[slot_id] = NULL; } +/* + * Free a virt_device structure. + * If the virt_device added a tt_info (a hub) and has children pointing to + * that tt_info, then free the child first. Recursive. + * We can't rely on udev at this point to find child-parent relationships. + */ +void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id) +{ + struct xhci_virt_device *vdev; + struct list_head *tt_list_head; + struct xhci_tt_bw_info *tt_info, *next; + int i; + + vdev = xhci->devs[slot_id]; + if (!vdev) + return; + + tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts); + list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { + /* is this a hub device that added a tt_info to the tts list */ + if (tt_info->slot_id == slot_id) { + /* are any devices using this tt_info? */ + for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) { + vdev = xhci->devs[i]; + if (vdev && (vdev->tt_info == tt_info)) + xhci_free_virt_devices_depth_first( + xhci, i); + } + } + } + /* we are now at a leaf device */ + xhci_free_virt_device(xhci, slot_id); +} + int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags) { @@ -1795,7 +1829,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int size; int i, j, num_ports; - del_timer_sync(&xhci->cmd_timer); + cancel_delayed_work_sync(&xhci->cmd_timer); /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); @@ -1828,8 +1862,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } } - for (i = 1; i < MAX_HC_SLOTS; ++i) - xhci_free_virt_device(xhci, i); + for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--) + xhci_free_virt_devices_depth_first(xhci, i); dma_pool_destroy(xhci->segment_pool); xhci->segment_pool = NULL; @@ -2342,9 +2376,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) INIT_LIST_HEAD(&xhci->cmd_list); - /* init command timeout timer */ - setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout, - (unsigned long)xhci); + /* init command timeout work */ + INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout); + init_completion(&xhci->cmd_ring_stop_completion); page_size = readl(&xhci->op_regs->page_size); xhci_dbg_trace(xhci, trace_xhci_dbg_init, diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 1094ebd2838f..bac961cd24ad 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -579,8 +579,10 @@ static int xhci_mtk_probe(struct platform_device *pdev) goto disable_ldos; irq = platform_get_irq(pdev, 0); - if (irq < 0) + if (irq < 0) { + ret = irq; goto disable_clk; + } /* Initialize dma_mask and coherent_dma_mask to 32-bits */ ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index e96ae80d107e..954abfd5014d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -165,7 +165,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bdf6b13d9b67..25f522b09dd9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -279,23 +279,76 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci) readl(&xhci->dba->doorbell[0]); } -static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) +static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay) +{ + return mod_delayed_work(system_wq, &xhci->cmd_timer, delay); +} + +static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci) +{ + return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command, + cmd_list); +} + +/* + * Turn all commands on command ring with status set to "aborted" to no-op trbs. + * If there are other commands waiting then restart the ring and kick the timer. + * This must be called with command ring stopped and xhci->lock held. + */ +static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, + struct xhci_command *cur_cmd) +{ + struct xhci_command *i_cmd; + u32 cycle_state; + + /* Turn all aborted commands in list to no-ops, then restart */ + list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) { + + if (i_cmd->status != COMP_CMD_ABORT) + continue; + + i_cmd->status = COMP_CMD_STOP; + + xhci_dbg(xhci, "Turn aborted command %p to no-op\n", + i_cmd->command_trb); + /* get cycle state from the original cmd trb */ + cycle_state = le32_to_cpu( + i_cmd->command_trb->generic.field[3]) & TRB_CYCLE; + /* modify the command trb to no-op command */ + i_cmd->command_trb->generic.field[0] = 0; + i_cmd->command_trb->generic.field[1] = 0; + i_cmd->command_trb->generic.field[2] = 0; + i_cmd->command_trb->generic.field[3] = cpu_to_le32( + TRB_TYPE(TRB_CMD_NOOP) | cycle_state); + + /* + * caller waiting for completion is called when command + * completion event is received for these no-op commands + */ + } + + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; + + /* ring command ring doorbell to restart the command ring */ + if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) && + !(xhci->xhc_state & XHCI_STATE_DYING)) { + xhci->current_cmd = cur_cmd; + xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT); + xhci_ring_cmd_db(xhci); + } +} + +/* Must be called with xhci->lock held, releases and aquires lock back */ +static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags) { u64 temp_64; int ret; xhci_dbg(xhci, "Abort command ring\n"); - temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); - xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; + reinit_completion(&xhci->cmd_ring_stop_completion); - /* - * Writing the CMD_RING_ABORT bit should cause a cmd completion event, - * however on some host hw the CMD_RING_RUNNING bit is correctly cleared - * but the completion event in never sent. Use the cmd timeout timer to - * handle those cases. Use twice the time to cover the bit polling retry - */ - mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT)); + temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); @@ -315,17 +368,30 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) udelay(1000); ret = xhci_handshake(&xhci->op_regs->cmd_ring, CMD_RING_RUNNING, 0, 3 * 1000 * 1000); - if (ret == 0) - return 0; - - xhci_err(xhci, "Stopped the command ring failed, " - "maybe the host is dead\n"); - del_timer(&xhci->cmd_timer); - xhci->xhc_state |= XHCI_STATE_DYING; - xhci_halt(xhci); - return -ESHUTDOWN; + if (ret < 0) { + xhci_err(xhci, "Stopped the command ring failed, " + "maybe the host is dead\n"); + xhci->xhc_state |= XHCI_STATE_DYING; + xhci_halt(xhci); + return -ESHUTDOWN; + } + } + /* + * Writing the CMD_RING_ABORT bit should cause a cmd completion event, + * however on some host hw the CMD_RING_RUNNING bit is correctly cleared + * but the completion event in never sent. Wait 2 secs (arbitrary + * number) to handle those cases after negation of CMD_RING_RUNNING. + */ + spin_unlock_irqrestore(&xhci->lock, flags); + ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion, + msecs_to_jiffies(2000)); + spin_lock_irqsave(&xhci->lock, flags); + if (!ret) { + xhci_dbg(xhci, "No stop event for abort, ring start fail?\n"); + xhci_cleanup_command_queue(xhci); + } else { + xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci)); } - return 0; } @@ -1207,101 +1273,62 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci) xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT); } -/* - * Turn all commands on command ring with status set to "aborted" to no-op trbs. - * If there are other commands waiting then restart the ring and kick the timer. - * This must be called with command ring stopped and xhci->lock held. - */ -static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, - struct xhci_command *cur_cmd) -{ - struct xhci_command *i_cmd, *tmp_cmd; - u32 cycle_state; - - /* Turn all aborted commands in list to no-ops, then restart */ - list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list, - cmd_list) { - - if (i_cmd->status != COMP_CMD_ABORT) - continue; - - i_cmd->status = COMP_CMD_STOP; - - xhci_dbg(xhci, "Turn aborted command %p to no-op\n", - i_cmd->command_trb); - /* get cycle state from the original cmd trb */ - cycle_state = le32_to_cpu( - i_cmd->command_trb->generic.field[3]) & TRB_CYCLE; - /* modify the command trb to no-op command */ - i_cmd->command_trb->generic.field[0] = 0; - i_cmd->command_trb->generic.field[1] = 0; - i_cmd->command_trb->generic.field[2] = 0; - i_cmd->command_trb->generic.field[3] = cpu_to_le32( - TRB_TYPE(TRB_CMD_NOOP) | cycle_state); - - /* - * caller waiting for completion is called when command - * completion event is received for these no-op commands - */ - } - - xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; - - /* ring command ring doorbell to restart the command ring */ - if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) && - !(xhci->xhc_state & XHCI_STATE_DYING)) { - xhci->current_cmd = cur_cmd; - mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); - xhci_ring_cmd_db(xhci); - } - return; -} - - -void xhci_handle_command_timeout(unsigned long data) +void xhci_handle_command_timeout(struct work_struct *work) { struct xhci_hcd *xhci; int ret; unsigned long flags; u64 hw_ring_state; - bool second_timeout = false; - xhci = (struct xhci_hcd *) data; - /* mark this command to be cancelled */ + xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer); + spin_lock_irqsave(&xhci->lock, flags); - if (xhci->current_cmd) { - if (xhci->current_cmd->status == COMP_CMD_ABORT) - second_timeout = true; - xhci->current_cmd->status = COMP_CMD_ABORT; + + /* + * If timeout work is pending, or current_cmd is NULL, it means we + * raced with command completion. Command is handled so just return. + */ + if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) { + spin_unlock_irqrestore(&xhci->lock, flags); + return; } + /* mark this command to be cancelled */ + xhci->current_cmd->status = COMP_CMD_ABORT; /* Make sure command ring is running before aborting it */ hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && (hw_ring_state & CMD_RING_RUNNING)) { - spin_unlock_irqrestore(&xhci->lock, flags); + /* Prevent new doorbell, and start command abort */ + xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; xhci_dbg(xhci, "Command timeout\n"); - ret = xhci_abort_cmd_ring(xhci); + ret = xhci_abort_cmd_ring(xhci, flags); if (unlikely(ret == -ESHUTDOWN)) { xhci_err(xhci, "Abort command ring failed\n"); xhci_cleanup_command_queue(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); + + return; } - return; + + goto time_out_completed; } - /* command ring failed to restart, or host removed. Bail out */ - if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) { - spin_unlock_irqrestore(&xhci->lock, flags); - xhci_dbg(xhci, "command timed out twice, ring start fail?\n"); + /* host removed. Bail out */ + if (xhci->xhc_state & XHCI_STATE_REMOVING) { + xhci_dbg(xhci, "host removed, ring start fail?\n"); xhci_cleanup_command_queue(xhci); - return; + + goto time_out_completed; } /* command timeout on stopped ring, ring can't be aborted */ xhci_dbg(xhci, "Command timeout on stopped ring\n"); xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd); + +time_out_completed: spin_unlock_irqrestore(&xhci->lock, flags); return; } @@ -1333,7 +1360,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list); - del_timer(&xhci->cmd_timer); + cancel_delayed_work(&xhci->cmd_timer); trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event); @@ -1341,7 +1368,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, /* If CMD ring stopped we own the trbs between enqueue and dequeue */ if (cmd_comp_code == COMP_CMD_STOP) { - xhci_handle_stopped_cmd_ring(xhci, cmd); + complete_all(&xhci->cmd_ring_stop_completion); return; } @@ -1359,8 +1386,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, */ if (cmd_comp_code == COMP_CMD_ABORT) { xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - if (cmd->status == COMP_CMD_ABORT) + if (cmd->status == COMP_CMD_ABORT) { + if (xhci->current_cmd == cmd) + xhci->current_cmd = NULL; goto event_handled; + } } cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3])); @@ -1421,7 +1451,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, if (cmd->cmd_list.next != &xhci->cmd_list) { xhci->current_cmd = list_entry(cmd->cmd_list.next, struct xhci_command, cmd_list); - mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT); + } else if (xhci->current_cmd == cmd) { + xhci->current_cmd = NULL; } event_handled: @@ -1939,8 +1971,9 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, struct xhci_ep_ctx *ep_ctx; u32 trb_comp_code; u32 remaining, requested; - bool on_data_stage; + u32 trb_type; + trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3])); slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); xdev = xhci->devs[slot_id]; ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1; @@ -1950,14 +1983,11 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, requested = td->urb->transfer_buffer_length; remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)); - /* not setup (dequeue), or status stage means we are at data stage */ - on_data_stage = (ep_trb != ep_ring->dequeue && ep_trb != td->last_trb); - switch (trb_comp_code) { case COMP_SUCCESS: - if (ep_trb != td->last_trb) { + if (trb_type != TRB_STATUS) { xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n", - on_data_stage ? "data" : "setup"); + (trb_type == TRB_DATA) ? "data" : "setup"); *status = -ESHUTDOWN; break; } @@ -1967,15 +1997,25 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, *status = 0; break; case COMP_STOP_SHORT: - if (on_data_stage) + if (trb_type == TRB_DATA || trb_type == TRB_NORMAL) td->urb->actual_length = remaining; else xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n"); goto finish_td; case COMP_STOP: - if (on_data_stage) + switch (trb_type) { + case TRB_SETUP: + td->urb->actual_length = 0; + goto finish_td; + case TRB_DATA: + case TRB_NORMAL: td->urb->actual_length = requested - remaining; - goto finish_td; + goto finish_td; + default: + xhci_warn(xhci, "WARN: unexpected TRB Type %d\n", + trb_type); + goto finish_td; + } case COMP_STOP_INVAL: goto finish_td; default: @@ -1987,7 +2027,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, /* else fall through */ case COMP_STALL: /* Did we transfer part of the data (middle) phase? */ - if (on_data_stage) + if (trb_type == TRB_DATA || trb_type == TRB_NORMAL) td->urb->actual_length = requested - remaining; else if (!td->urb_length_set) td->urb->actual_length = 0; @@ -1995,14 +2035,15 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, } /* stopped at setup stage, no data transferred */ - if (ep_trb == ep_ring->dequeue) + if (trb_type == TRB_SETUP) goto finish_td; /* * if on data stage then update the actual_length of the URB and flag it * as set, so it won't be overwritten in the event for the last TRB. */ - if (on_data_stage) { + if (trb_type == TRB_DATA || + trb_type == TRB_NORMAL) { td->urb_length_set = true; td->urb->actual_length = requested - remaining; xhci_dbg(xhci, "Waiting for status stage event\n"); @@ -3790,9 +3831,9 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, /* if there are no other commands queued we start the timeout timer */ if (xhci->cmd_list.next == &cmd->cmd_list && - !timer_pending(&xhci->cmd_timer)) { + !delayed_work_pending(&xhci->cmd_timer)) { xhci->current_cmd = cmd; - mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT); } queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1cd56417cbec..0c8deb9ed42d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3787,8 +3787,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_lock(&xhci->mutex); - if (xhci->xhc_state) /* dying, removing or halted */ + if (xhci->xhc_state) { /* dying, removing or halted */ + ret = -ESHUTDOWN; goto out; + } if (!udev->slot_id) { xhci_dbg_trace(xhci, trace_xhci_dbg_address, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8ccc11a974b8..2d7b6374b58d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1568,7 +1568,8 @@ struct xhci_hcd { #define CMD_RING_STATE_STOPPED (1 << 2) struct list_head cmd_list; unsigned int cmd_ring_reserved_trbs; - struct timer_list cmd_timer; + struct delayed_work cmd_timer; + struct completion cmd_ring_stop_completion; struct xhci_command *current_cmd; struct xhci_ring *event_ring; struct xhci_erst erst; @@ -1934,7 +1935,7 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state); void xhci_stop_endpoint_command_watchdog(unsigned long arg); -void xhci_handle_command_timeout(unsigned long data); +void xhci_handle_command_timeout(struct work_struct *work); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 310238c6b5cd..896798071817 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -469,6 +469,7 @@ static const struct musb_platform_ops bfin_ops = { .init = bfin_musb_init, .exit = bfin_musb_exit, + .fifo_offset = bfin_fifo_offset, .readb = bfin_readb, .writeb = bfin_writeb, .readw = bfin_readw, diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 9e226468a13e..fca288bbc800 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2050,6 +2050,7 @@ struct musb_pending_work { struct list_head node; }; +#ifdef CONFIG_PM /* * Called from musb_runtime_resume(), musb_resume(), and * musb_queue_resume_work(). Callers must take musb->lock. @@ -2077,6 +2078,7 @@ static int musb_run_resume_work(struct musb *musb) return error; } +#endif /* * Called to run work if device is active or else queue the work to happen diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index a611e2f67bdc..ade902ea1221 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -216,6 +216,7 @@ struct musb_platform_ops { void (*pre_root_reset_end)(struct musb *musb); void (*post_root_reset_end)(struct musb *musb); int (*phy_callback)(enum musb_vbus_id_status status); + void (*clear_ep_rxintr)(struct musb *musb, int epnum); }; /* @@ -626,6 +627,12 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb) musb->ops->post_root_reset_end(musb); } +static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum) +{ + if (musb->ops->clear_ep_rxintr) + musb->ops->clear_ep_rxintr(musb, epnum); +} + /* * gets the "dr_mode" property from DT and converts it into musb_mode * if the property is not found or not recognized returns MUSB_OTG diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index feae1561b9ab..9f125e179acd 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -267,6 +267,17 @@ static void otg_timer(unsigned long _musb) pm_runtime_put_autosuspend(dev); } +void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum) +{ + u32 epintr; + struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent); + const struct dsps_musb_wrapper *wrp = glue->wrp; + + /* musb->lock might already been held */ + epintr = (1 << epnum) << wrp->rxep_shift; + musb_writel(musb->ctrl_base, wrp->epintr_status, epintr); +} + static irqreturn_t dsps_interrupt(int irq, void *hci) { struct musb *musb = hci; @@ -622,6 +633,7 @@ static struct musb_platform_ops dsps_ops = { .set_mode = dsps_musb_set_mode, .recover = dsps_musb_recover, + .clear_ep_rxintr = dsps_musb_clear_ep_rxintr, }; static u64 musb_dmamask = DMA_BIT_MASK(32); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index f6cdbad00dac..ac3a4952abb4 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2374,12 +2374,11 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) int is_in = usb_pipein(urb->pipe); int status = 0; u16 csr; + struct dma_channel *dma = NULL; musb_ep_select(regs, hw_end); if (is_dma_capable()) { - struct dma_channel *dma; - dma = is_in ? ep->rx_channel : ep->tx_channel; if (dma) { status = ep->musb->dma_controller->channel_abort(dma); @@ -2395,10 +2394,9 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) /* giveback saves bulk toggle */ csr = musb_h_flush_rxfifo(ep, 0); - /* REVISIT we still get an irq; should likely clear the - * endpoint's irq status here to avoid bogus irqs. - * clearing that status is platform-specific... - */ + /* clear the endpoint's irq status here to avoid bogus irqs */ + if (is_dma_capable() && dma) + musb_platform_clear_ep_rxintr(musb, ep->epnum); } else if (ep->epnum) { musb_h_tx_flush_fifo(ep); csr = musb_readw(epio, MUSB_TXCSR); diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index f7b13fd25257..a3dcbd55e436 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -157,5 +157,5 @@ struct musb_dma_controller { void __iomem *base; u8 channel_count; u8 used_channels; - u8 irq; + int irq; }; diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 5f17a3b9916d..80260b08398b 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -50,6 +50,7 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ +static int cyberjack_attach(struct usb_serial *serial); static int cyberjack_port_probe(struct usb_serial_port *port); static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, @@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, + .attach = cyberjack_attach, .port_probe = cyberjack_port_probe, .port_remove = cyberjack_port_remove, .open = cyberjack_open, @@ -100,6 +102,14 @@ struct cyberjack_private { short wrsent; /* Data already sent */ }; +static int cyberjack_attach(struct usb_serial *serial) +{ + if (serial->num_bulk_out < serial->num_ports) + return -ENODEV; + + return 0; +} + static int cyberjack_port_probe(struct usb_serial_port *port) { struct cyberjack_private *priv; diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index 8282a6a18fee..22f23a429a95 100644 --- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -1237,6 +1237,7 @@ static int f81534_attach(struct usb_serial *serial) static int f81534_port_probe(struct usb_serial_port *port) { struct f81534_port_private *port_priv; + int ret; port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL); if (!port_priv) @@ -1246,10 +1247,11 @@ static int f81534_port_probe(struct usb_serial_port *port) mutex_init(&port_priv->mcr_mutex); /* Assign logic-to-phy mapping */ - port_priv->phy_num = f81534_logic_to_phy_port(port->serial, port); - if (port_priv->phy_num < 0 || port_priv->phy_num >= F81534_NUM_PORT) - return -ENODEV; + ret = f81534_logic_to_phy_port(port->serial, port); + if (ret < 0) + return ret; + port_priv->phy_num = ret; usb_set_serial_port_data(port, port_priv); dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__, port->port_number, port_priv->phy_num); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 97cabf803c2f..b2f2e87aed94 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1043,6 +1043,7 @@ static int garmin_write_bulk(struct usb_serial_port *port, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status); count = status; + kfree(buffer); } /* we are done with this urb, so let the host driver diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index dcc0c58aaad5..d50e5773483f 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2751,6 +2751,11 @@ static int edge_startup(struct usb_serial *serial) EDGE_COMPATIBILITY_MASK1, EDGE_COMPATIBILITY_MASK2 }; + if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + dev = serial->dev; /* create our private serial structure */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index c339163698eb..9a0db2965fbb 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1499,8 +1499,7 @@ static int do_boot_mode(struct edgeport_serial *serial, dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__); - /* return an error on purpose */ - return -ENODEV; + return 1; } stayinbootmode: @@ -1508,7 +1507,7 @@ stayinbootmode: dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__); serial->product_info.TiMode = TI_MODE_BOOT; - return 0; + return 1; } static int ti_do_config(struct edgeport_port *port, int feature, int on) @@ -2546,6 +2545,13 @@ static int edge_startup(struct usb_serial *serial) int status; u16 product_id; + /* Make sure we have the required endpoints when in download mode. */ + if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) { + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) + return -ENODEV; + } + /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); if (!edge_serial) @@ -2553,14 +2559,18 @@ static int edge_startup(struct usb_serial *serial) mutex_init(&edge_serial->es_lock); edge_serial->serial = serial; + INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work); usb_set_serial_data(serial, edge_serial); status = download_fw(edge_serial); - if (status) { + if (status < 0) { kfree(edge_serial); return status; } + if (status > 0) + return 1; /* bind but do not register any ports */ + product_id = le16_to_cpu( edge_serial->serial->dev->descriptor.idProduct); @@ -2572,7 +2582,6 @@ static int edge_startup(struct usb_serial *serial) } } - INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work); edge_heartbeat_schedule(edge_serial); return 0; @@ -2580,6 +2589,9 @@ static int edge_startup(struct usb_serial *serial) static void edge_disconnect(struct usb_serial *serial) { + struct edgeport_serial *edge_serial = usb_get_serial_data(serial); + + cancel_delayed_work_sync(&edge_serial->heartbeat_work); } static void edge_release(struct usb_serial *serial) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 344b4eea4bd5..d57fb5199218 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -68,6 +68,16 @@ struct iuu_private { u32 clk; }; +static int iuu_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports) + return -ENODEV; + + return 0; +} + static int iuu_port_probe(struct usb_serial_port *port) { struct iuu_private *priv; @@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = { .tiocmset = iuu_tiocmset, .set_termios = iuu_set_termios, .init_termios = iuu_init_termios, + .attach = iuu_attach, .port_probe = iuu_port_probe, .port_remove = iuu_port_remove, }; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index e49ad0c63ad8..83523fcf6fb9 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); #endif +static int keyspan_pda_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int keyspan_pda_port_probe(struct usb_serial_port *port) { @@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = { .break_ctl = keyspan_pda_break_ctl, .tiocmget = keyspan_pda_tiocmget, .tiocmset = keyspan_pda_tiocmset, + .attach = keyspan_pda_attach, .port_probe = keyspan_pda_port_probe, .port_remove = keyspan_pda_port_remove, }; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 2363654cafc9..813035f51fe7 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -51,6 +51,7 @@ /* Function prototypes */ +static int kobil_attach(struct usb_serial *serial); static int kobil_port_probe(struct usb_serial_port *probe); static int kobil_port_remove(struct usb_serial_port *probe); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port); @@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = { .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_ports = 1, + .attach = kobil_attach, .port_probe = kobil_port_probe, .port_remove = kobil_port_remove, .ioctl = kobil_ioctl, @@ -113,6 +115,16 @@ struct kobil_private { }; +static int kobil_attach(struct usb_serial *serial) +{ + if (serial->num_interrupt_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n"); + return -ENODEV; + } + + return 0; +} + static int kobil_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index d52caa03679c..91bc170b408a 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -65,8 +65,6 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; }; -static struct usb_serial_driver moschip7720_2port_driver; - #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 @@ -970,25 +968,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) tty_port_tty_wakeup(&mos7720_port->port->port); } -/* - * mos77xx_probe - * this function installs the appropriate read interrupt endpoint callback - * depending on whether the device is a 7720 or 7715, thus avoiding costly - * run-time checks in the high-frequency callback routine itself. - */ -static int mos77xx_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - if (id->idProduct == MOSCHIP_DEVICE_ID_7715) - moschip7720_2port_driver.read_int_callback = - mos7715_interrupt_callback; - else - moschip7720_2port_driver.read_int_callback = - mos7720_interrupt_callback; - - return 0; -} - static int mos77xx_calc_num_ports(struct usb_serial *serial) { u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); @@ -1917,6 +1896,11 @@ static int mos7720_startup(struct usb_serial *serial) u16 product; int ret_val; + if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing bulk endpoints\n"); + return -ENODEV; + } + product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; @@ -1941,19 +1925,18 @@ static int mos7720_startup(struct usb_serial *serial) tmp->interrupt_in_endpointAddress; serial->port[1]->interrupt_in_urb = NULL; serial->port[1]->interrupt_in_buffer = NULL; + + if (serial->port[0]->interrupt_in_urb) { + struct urb *urb = serial->port[0]->interrupt_in_urb; + + urb->complete = mos7715_interrupt_callback; + } } /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); - /* start the interrupt urb */ - ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); - if (ret_val) - dev_err(&dev->dev, - "%s - Error %d submitting control urb\n", - __func__, ret_val); - #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT if (product == MOSCHIP_DEVICE_ID_7715) { ret_val = mos7715_parport_init(serial); @@ -1961,6 +1944,13 @@ static int mos7720_startup(struct usb_serial *serial) return ret_val; } #endif + /* start the interrupt urb */ + ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); + if (ret_val) { + dev_err(&dev->dev, "failed to submit interrupt urb: %d\n", + ret_val); + } + /* LSR For Port 1 */ read_mos_reg(serial, 0, MOS7720_LSR, &data); dev_dbg(&dev->dev, "LSR:%x\n", data); @@ -1970,6 +1960,8 @@ static int mos7720_startup(struct usb_serial *serial) static void mos7720_release(struct usb_serial *serial) { + usb_kill_urb(serial->port[0]->interrupt_in_urb); + #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* close the parallel port */ @@ -2019,11 +2011,6 @@ static int mos7720_port_probe(struct usb_serial_port *port) if (!mos7720_port) return -ENOMEM; - /* Initialize all port interrupt end point to port 0 int endpoint. - * Our device has only one interrupt endpoint common to all ports. - */ - port->interrupt_in_endpointAddress = - port->serial->port[0]->interrupt_in_endpointAddress; mos7720_port->port = port; usb_set_serial_port_data(port, mos7720_port); @@ -2053,7 +2040,6 @@ static struct usb_serial_driver moschip7720_2port_driver = { .close = mos7720_close, .throttle = mos7720_throttle, .unthrottle = mos7720_unthrottle, - .probe = mos77xx_probe, .attach = mos7720_startup, .release = mos7720_release, .port_probe = mos7720_port_probe, @@ -2067,7 +2053,7 @@ static struct usb_serial_driver moschip7720_2port_driver = { .chars_in_buffer = mos7720_chars_in_buffer, .break_ctl = mos7720_break, .read_bulk_callback = mos7720_bulk_in_callback, - .read_int_callback = NULL /* dynamically assigned in probe() */ + .read_int_callback = mos7720_interrupt_callback, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 9a220b8e810f..ea27fb23967a 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -214,7 +214,6 @@ MODULE_DEVICE_TABLE(usb, id_table); struct moschip_port { int port_num; /*Actual port number in the device(1,2,etc) */ - struct urb *write_urb; /* write URB for this port */ struct urb *read_urb; /* read URB for this port */ __u8 shadowLCR; /* last LCR value received */ __u8 shadowMCR; /* last MCR value received */ @@ -1037,9 +1036,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) serial, serial->port[0]->interrupt_in_urb->interval); - /* start interrupt read for mos7840 * - * will continue as long as mos7840 is connected */ - + /* start interrupt read for mos7840 */ response = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); @@ -1186,7 +1183,6 @@ static void mos7840_close(struct usb_serial_port *port) } } - usb_kill_urb(mos7840_port->write_urb); usb_kill_urb(mos7840_port->read_urb); mos7840_port->read_urb_busy = false; @@ -1199,12 +1195,6 @@ static void mos7840_close(struct usb_serial_port *port) } } - if (mos7840_port->write_urb) { - /* if this urb had a transfer buffer already (old tx) free it */ - kfree(mos7840_port->write_urb->transfer_buffer); - usb_free_urb(mos7840_port->write_urb); - } - Data = 0x0; mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); @@ -2113,6 +2103,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial) return mos7840_num_ports; } +static int mos7840_attach(struct usb_serial *serial) +{ + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int mos7840_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -2388,6 +2389,7 @@ static struct usb_serial_driver moschip7840_4port_device = { .tiocmset = mos7840_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, + .attach = mos7840_attach, .port_probe = mos7840_port_probe, .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index f6c6900bccf0..a180b17d2432 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -38,6 +38,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int omninet_write_room(struct tty_struct *tty); static void omninet_disconnect(struct usb_serial *serial); +static int omninet_attach(struct usb_serial *serial); static int omninet_port_probe(struct usb_serial_port *port); static int omninet_port_remove(struct usb_serial_port *port); @@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = { .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_ports = 1, + .attach = omninet_attach, .port_probe = omninet_port_probe, .port_remove = omninet_port_remove, .open = omninet_open, @@ -104,6 +106,17 @@ struct omninet_data { __u8 od_outseq; /* Sequence number for bulk_out URBs */ }; +static int omninet_attach(struct usb_serial *serial) +{ + /* The second bulk-out endpoint is used for writing. */ + if (serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int omninet_port_probe(struct usb_serial_port *port) { struct omninet_data *od; diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index a4b88bc038b6..b8bf52bf7a94 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int oti6858_attach(struct usb_serial *serial); static int oti6858_port_probe(struct usb_serial_port *port); static int oti6858_port_remove(struct usb_serial_port *port); @@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = { .write_bulk_callback = oti6858_write_bulk_callback, .write_room = oti6858_write_room, .chars_in_buffer = oti6858_chars_in_buffer, + .attach = oti6858_attach, .port_probe = oti6858_port_probe, .port_remove = oti6858_port_remove, }; @@ -324,6 +326,20 @@ static void send_data(struct work_struct *work) usb_serial_port_softint(port); } +static int oti6858_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int oti6858_port_probe(struct usb_serial_port *port) { struct oti6858_private *priv; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index ae682e4eeaef..46fca6b75846 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -220,9 +220,17 @@ static int pl2303_probe(struct usb_serial *serial, static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; + unsigned char num_ports = serial->num_ports; enum pl2303_type type = TYPE_01; unsigned char *buf; + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); if (!spriv) return -ENOMEM; diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 659cb8606bd9..5709cc93b083 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -408,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port) { struct usb_serial *serial; struct qt2_port_private *port_priv; - unsigned long flags; int i; serial = port->serial; port_priv = usb_get_serial_port_data(port); - spin_lock_irqsave(&port_priv->urb_lock, flags); usb_kill_urb(port_priv->write_urb); - port_priv->urb_in_use = false; - spin_unlock_irqrestore(&port_priv->urb_lock, flags); /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index ef0dbf0703c5..475e6c31b266 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial, return 0; } +static int spcp8x5_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int spcp8x5_port_probe(struct usb_serial_port *port) { const struct usb_device_id *id = usb_get_serial_data(port->serial); @@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = { .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, .probe = spcp8x5_probe, + .attach = spcp8x5_attach, .port_probe = spcp8x5_port_probe, .port_remove = spcp8x5_port_remove, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 8db9d071d940..64b85b8dedf3 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -579,6 +579,13 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + status = -ENODEV; + goto free_tdev; + } + return 0; free_tdev: diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index af3c7eecff91..16cc18369111 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2109,6 +2109,13 @@ UNUSUAL_DEV( 0x152d, 0x2566, 0x0114, 0x0114, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BROKEN_FUA ), +/* Reported-by George Cherian <george.cherian@cavium.com> */ +UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999, + "JMicron", + "JMS56x", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + /* * Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI) * and Mac USB Dock USB-SCSI */ |