diff options
Diffstat (limited to 'drivers/usb/serial/mct_u232.c')
| -rw-r--r-- | drivers/usb/serial/mct_u232.c | 46 |
1 files changed, 0 insertions, 46 deletions
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index ba0d28727ccb..a975bb80303f 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -19,50 +19,6 @@ * DTR/RTS signal handling may be incomplete or incorrect. I have mainly * implemented what I have seen with SniffUSB or found in belkin_sa.c. * For further TODOs check also belkin_sa.c. - * - * TEST STATUS: - * Basic tests have been performed with minicom/zmodem transfers and - * modem dialing under Linux 2.4.0-test10 (for me it works fine). - * - * 04-Nov-2003 Bill Marr <marr at flex dot com> - * - Mimic Windows driver by sending 2 USB 'device request' messages - * following normal 'baud rate change' message. This allows data to be - * transmitted to RS-232 devices which don't assert the 'CTS' signal. - * - * 10-Nov-2001 Wolfgang Grandegger - * - Fixed an endianess problem with the baudrate selection for PowerPC. - * - * 06-Dec-2001 Martin Hamilton <martinh@gnu.org> - * - Added support for the Belkin F5U109 DB9 adaptor - * - * 30-May-2001 Greg Kroah-Hartman - * - switched from using spinlock to a semaphore, which fixes lots of - * problems. - * - * 04-May-2001 Stelian Pop - * - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes - * instead of the device reported 32 (using 32 bytes causes many data - * loss, Windows driver uses 16 too). - * - * 02-May-2001 Stelian Pop - * - Fixed the baud calculation for Sitecom U232-P25 model - * - * 08-Apr-2001 gb - * - Identify version on module load. - * - * 06-Jan-2001 Cornel Ciocirlan - * - Added support for Sitecom U232-P25 model (Product Id 0x0230) - * - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200) - * - * 29-Nov-2000 Greg Kroah-Hartman - * - Added device id table to fit with 2.4.0-test11 structure. - * - took out DEAL_WITH_TWO_INT_IN_ENDPOINTS #define as it's not needed - * (lots of things will change if/when the usb-serial core changes to - * handle these issues. - * - * 27-Nov-2000 Wolfgang Grandegge - * A version for kernel 2.4.0-test10 released to the Linux community - * (via linux-usb-devel). */ #include <linux/kernel.h> @@ -526,7 +482,6 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) mct_u232_msr_to_state(&priv->control_state, priv->last_msr); spin_unlock_irqrestore(&priv->lock, flags); - port->read_urb->dev = port->serial->dev; retval = usb_submit_urb(port->read_urb, GFP_KERNEL); if (retval) { dev_err(&port->dev, @@ -535,7 +490,6 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) goto error; } - port->interrupt_in_urb->dev = port->serial->dev; retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (retval) { usb_kill_urb(port->read_urb); |