diff options
Diffstat (limited to 'drivers/usb/core')
| -rw-r--r-- | drivers/usb/core/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/usb/core/devices.c | 41 | ||||
| -rw-r--r-- | drivers/usb/core/driver.c | 8 | ||||
| -rw-r--r-- | drivers/usb/core/generic.c | 4 | ||||
| -rw-r--r-- | drivers/usb/core/hcd.c | 6 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 62 | ||||
| -rw-r--r-- | drivers/usb/core/message.c | 180 | ||||
| -rw-r--r-- | drivers/usb/core/urb.c | 120 | ||||
| -rw-r--r-- | drivers/usb/core/usb.h | 1 |
9 files changed, 297 insertions, 139 deletions
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index dfacc478a8fc..351ede4b5de2 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -32,6 +32,20 @@ config USB_DEFAULT_PERSIST If you have any questions about this, say Y here, only say N if you know exactly what you are doing. +config USB_FEW_INIT_RETRIES + bool "Limit USB device initialization to only a few retries" + help + When a new USB device is detected, the kernel tries very hard + to initialize and enumerate it, with lots of nested retry loops. + This almost always works, but when it fails it can take a long time. + This option tells the kernel to make only a few retry attempts, + so that the total time required for a failed initialization is + no more than 30 seconds (as required by the USB OTG spec). + + Say N here unless you require new-device enumeration failure to + occur within 30 seconds (as might be needed in an embedded + application). + config USB_DYNAMIC_MINORS bool "Dynamic USB minor allocation" help diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 696b2b692b83..1ef2de6e375a 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -39,7 +39,6 @@ #include <linux/fs.h> #include <linux/mm.h> #include <linux/gfp.h> -#include <linux/poll.h> #include <linux/usb.h> #include <linux/usbdevice_fs.h> #include <linux/usb/hcd.h> @@ -97,22 +96,6 @@ static const char format_endpt[] = /* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */ "E: Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n"; -/* - * Wait for an connect/disconnect event to happen. We initialize - * the event counter with an odd number, and each event will increment - * the event counter by two, so it will always _stay_ odd. That means - * that it will never be zero, so "event 0" will never match a current - * event, and thus 'poll' will always trigger as readable for the first - * time it gets called. - */ -static struct device_connect_event { - atomic_t count; - wait_queue_head_t wait; -} device_event = { - .count = ATOMIC_INIT(1), - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(device_event.wait) -}; - struct class_info { int class; char *class_name; @@ -146,12 +129,6 @@ static const struct class_info clas_info[] = { /*****************************************************************/ -void usbfs_conn_disc_event(void) -{ - atomic_add(2, &device_event.count); - wake_up(&device_event.wait); -} - static const char *class_decode(const int class) { int ix; @@ -623,25 +600,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, return total_written; } -/* Kernel lock for "lastev" protection */ -static __poll_t usb_device_poll(struct file *file, - struct poll_table_struct *wait) -{ - unsigned int event_count; - - poll_wait(file, &device_event.wait, wait); - - event_count = atomic_read(&device_event.count); - if (file->f_version != event_count) { - file->f_version = event_count; - return EPOLLIN | EPOLLRDNORM; - } - - return 0; -} - const struct file_operations usbfs_devices_fops = { .llseek = no_seek_end_llseek, .read = usb_device_read, - .poll = usb_device_poll, }; diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index b351962279e4..98b7449c11f3 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -991,8 +991,7 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver, bus_for_each_dev(&usb_bus_type, NULL, new_udriver, __usb_bus_reprobe_drivers); } else { - printk(KERN_ERR "%s: error %d registering device " - " driver %s\n", + pr_err("%s: error %d registering device driver %s\n", usbcore_name, retval, new_udriver->name); } @@ -1068,9 +1067,8 @@ out: out_newid: driver_unregister(&new_driver->drvwrap.driver); - printk(KERN_ERR "%s: error %d registering interface " - " driver %s\n", - usbcore_name, retval, new_driver->name); + pr_err("%s: error %d registering interface driver %s\n", + usbcore_name, retval, new_driver->name); goto out; } EXPORT_SYMBOL_GPL(usb_register_driver); diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 2b2f1ab6e36a..22c887f5c497 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -195,7 +195,7 @@ int usb_choose_configuration(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_choose_configuration); -static int __check_usb_generic(struct device_driver *drv, void *data) +static int __check_for_non_generic_match(struct device_driver *drv, void *data) { struct usb_device *udev = data; struct usb_device_driver *udrv; @@ -219,7 +219,7 @@ static bool usb_generic_driver_match(struct usb_device *udev) * If any other driver wants the device, leave the device to this other * driver. */ - if (bus_for_each_drv(&usb_bus_type, NULL, udev, __check_usb_generic)) + if (bus_for_each_drv(&usb_bus_type, NULL, udev, __check_for_non_generic_match)) return false; return true; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index a33b849e8beb..2c6b9578a7d3 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1657,9 +1657,9 @@ static void __usb_hcd_giveback_urb(struct urb *urb) usb_put_urb(urb); } -static void usb_giveback_urb_bh(unsigned long param) +static void usb_giveback_urb_bh(struct tasklet_struct *t) { - struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param; + struct giveback_urb_bh *bh = from_tasklet(bh, t, bh); struct list_head local_list; spin_lock_irq(&bh->lock); @@ -2403,7 +2403,7 @@ static void init_giveback_urb_bh(struct giveback_urb_bh *bh) spin_lock_init(&bh->lock); INIT_LIST_HEAD(&bh->head); - tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh); + tasklet_setup(&bh->bh, usb_giveback_urb_bh); } struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5b768b80d1ee..17202b2ee063 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2705,11 +2705,20 @@ static unsigned hub_is_wusb(struct usb_hub *hub) } +#ifdef CONFIG_USB_FEW_INIT_RETRIES +#define PORT_RESET_TRIES 2 +#define SET_ADDRESS_TRIES 1 +#define GET_DESCRIPTOR_TRIES 1 +#define GET_MAXPACKET0_TRIES 1 +#define PORT_INIT_TRIES 4 + +#else #define PORT_RESET_TRIES 5 #define SET_ADDRESS_TRIES 2 #define GET_DESCRIPTOR_TRIES 2 -#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) -#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)(scheme)) +#define GET_MAXPACKET0_TRIES 3 +#define PORT_INIT_TRIES 4 +#endif /* CONFIG_USB_FEW_INIT_RETRIES */ #define HUB_ROOT_RESET_TIME 60 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 @@ -2717,23 +2726,31 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define HUB_LONG_RESET_TIME 200 #define HUB_RESET_TIMEOUT 800 -/* - * "New scheme" enumeration causes an extra state transition to be - * exposed to an xhci host and causes USB3 devices to receive control - * commands in the default state. This has been seen to cause - * enumeration failures, so disable this enumeration scheme for USB3 - * devices. - */ static bool use_new_scheme(struct usb_device *udev, int retry, struct usb_port *port_dev) { int old_scheme_first_port = - port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME; + (port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME) || + old_scheme_first; + /* + * "New scheme" enumeration causes an extra state transition to be + * exposed to an xhci host and causes USB3 devices to receive control + * commands in the default state. This has been seen to cause + * enumeration failures, so disable this enumeration scheme for USB3 + * devices. + */ if (udev->speed >= USB_SPEED_SUPER) return false; - return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first); + /* + * If use_both_schemes is set, use the first scheme (whichever + * it is) for the larger half of the retries, then use the other + * scheme. Otherwise, use the first scheme for all the retries. + */ + if (use_both_schemes && retry >= (PORT_INIT_TRIES + 1) / 2) + return old_scheme_first_port; /* Second half */ + return !old_scheme_first_port; /* First half or all */ } /* Is a USB 3.0 port in the Inactive or Compliance Mode state? @@ -4545,6 +4562,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, const char *speed; int devnum = udev->devnum; const char *driver_name; + bool do_new_scheme; /* root hub ports have a slightly longer reset period * (from USB 2.0 spec, section 7.1.7.5) @@ -4657,14 +4675,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * first 8 bytes of the device descriptor to get the ep0 maxpacket * value. */ - for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { - bool did_new_scheme = false; + do_new_scheme = use_new_scheme(udev, retry_counter, port_dev); - if (use_new_scheme(udev, retry_counter, port_dev)) { + for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { + if (do_new_scheme) { struct usb_device_descriptor *buf; int r = 0; - did_new_scheme = true; retval = hub_enable_device(udev); if (retval < 0) { dev_err(&udev->dev, @@ -4684,7 +4701,8 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * 255 is for WUSB devices, we actually need to use * 512 (WUSB1.0[4.8.1]). */ - for (operations = 0; operations < 3; ++operations) { + for (operations = 0; operations < GET_MAXPACKET0_TRIES; + ++operations) { buf->bMaxPacketSize0 = 0; r = usb_control_msg(udev, usb_rcvaddr0pipe(), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, @@ -4773,11 +4791,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * - read ep0 maxpacket even for high and low speed, */ msleep(10); - /* use_new_scheme() checks the speed which may have - * changed since the initial look so we cache the result - * in did_new_scheme - */ - if (did_new_scheme) + if (do_new_scheme) break; } @@ -5106,7 +5120,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, unit_load = 100; status = 0; - for (i = 0; i < SET_CONFIG_TRIES; i++) { + for (i = 0; i < PORT_INIT_TRIES; i++) { /* reallocate for each attempt, since references * to the previous one can escape in various ways @@ -5239,7 +5253,7 @@ loop: break; /* When halfway through our retry count, power-cycle the port */ - if (i == (SET_CONFIG_TRIES / 2) - 1) { + if (i == (PORT_INIT_TRIES - 1) / 2) { dev_info(&port_dev->dev, "attempt power cycle\n"); usb_hub_set_port_power(hdev, hub, port1, false); msleep(2 * hub_power_on_good_delay(hub)); @@ -5770,7 +5784,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; - for (i = 0; i < SET_CONFIG_TRIES; ++i) { + for (i = 0; i < PORT_INIT_TRIES; ++i) { /* ep0 maxpacket size may change; let the HCD know about it. * Other endpoints will be handled by re-enumeration. */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index ae1de9cc4b09..f4107b9e8c38 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -163,6 +163,143 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, EXPORT_SYMBOL_GPL(usb_control_msg); /** + * usb_control_msg_send - Builds a control "send" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to send + * @size: length in bytes of the data to send + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is not + * expected to fill in a response (i.e. a "send message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else, + * as it will not be modified at all. This does not have the restriction that + * usb_control_msg() has where the data pointer must be to dynamically allocated + * memory (i.e. memory that can be successfully DMAed to a device). + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + const void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_sndctrlpipe(dev, endpoint); + int ret; + u8 *data = NULL; + + if (usb_pipe_type_check(dev, pipe)) + return -EINVAL; + + if (size) { + data = kmemdup(driver_data, size, memflags); + if (!data) + return -ENOMEM; + } + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + kfree(data); + + if (ret < 0) + return ret; + if (ret == size) + return 0; + return -EINVAL; +} +EXPORT_SYMBOL_GPL(usb_control_msg_send); + +/** + * usb_control_msg_recv - Builds a control "receive" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to be filled in by the message + * @size: length in bytes of the data to be received + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is + * expected to fill in a response (i.e. a "receive message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else + * that can be successfully written to. This function does not have the + * restriction that usb_control_msg() has where the data pointer must be to + * dynamically allocated memory (i.e. memory that can be successfully DMAed to a + * device). + * + * The "whole" message must be properly received from the device in order for + * this function to be successful. If a device returns less than the expected + * amount of data, then the function will fail. Do not use this for messages + * where a variable amount of data might be returned. + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_rcvctrlpipe(dev, endpoint); + int ret; + u8 *data; + + if (!size || !driver_data || usb_pipe_type_check(dev, pipe)) + return -EINVAL; + + data = kmalloc(size, memflags); + if (!data) + return -ENOMEM; + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + + if (ret < 0) + goto exit; + + if (ret == size) { + memcpy(driver_data, data, size); + ret = 0; + } else { + ret = -EINVAL; + } + +exit: + kfree(data); + return ret; +} +EXPORT_SYMBOL_GPL(usb_control_msg_recv); + +/** * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion * @usb_dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to @@ -948,11 +1085,12 @@ int usb_set_isoch_delay(struct usb_device *dev) if (dev->speed < USB_SPEED_SUPER) return 0; - return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + return usb_control_msg_send(dev, 0, USB_REQ_SET_ISOCH_DELAY, USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, dev->hub_delay, 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); + USB_CTRL_SET_TIMEOUT, + GFP_NOIO); } /** @@ -1070,13 +1208,13 @@ int usb_clear_halt(struct usb_device *dev, int pipe) * (like some ibmcam model 1 units) seem to expect hosts to make * this request for iso endpoints, which can't halt! */ - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, endp, NULL, 0, - USB_CTRL_SET_TIMEOUT); + result = usb_control_msg_send(dev, 0, + USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, + USB_ENDPOINT_HALT, endp, NULL, 0, + USB_CTRL_SET_TIMEOUT, GFP_NOIO); /* don't un-halt or force to DATA0 except on success */ - if (result < 0) + if (result) return result; /* NOTE: seems like Microsoft and Apple don't bother verifying @@ -1438,9 +1576,11 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) if (dev->quirks & USB_QUIRK_NO_SET_INTF) ret = -EPIPE; else - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, - alternate, interface, NULL, 0, 5000); + ret = usb_control_msg_send(dev, 0, + USB_REQ_SET_INTERFACE, + USB_RECIP_INTERFACE, alternate, + interface, NULL, 0, 5000, + GFP_NOIO); /* 9.4.10 says devices don't need this and are free to STALL the * request if the interface only has one alternate setting. @@ -1450,7 +1590,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) "manual set_interface for iface %d, alt %d\n", interface, alternate); manual = 1; - } else if (ret < 0) { + } else if (ret) { /* Re-instate the old alt setting */ usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting); usb_enable_lpm(dev); @@ -1574,11 +1714,11 @@ int usb_reset_configuration(struct usb_device *dev) mutex_unlock(hcd->bandwidth_mutex); return retval; } - retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_CONFIGURATION, 0, - config->desc.bConfigurationValue, 0, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (retval < 0) { + retval = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0, + config->desc.bConfigurationValue, 0, + NULL, 0, USB_CTRL_SET_TIMEOUT, + GFP_NOIO); + if (retval) { usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); @@ -1963,10 +2103,10 @@ free_interfaces: } kfree(new_interfaces); - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_CONFIGURATION, 0, configuration, 0, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (ret < 0 && cp) { + ret = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0, + configuration, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT, GFP_NOIO); + if (ret && cp) { /* * All the old state is gone, so what else can we do? * The device is probably useless now anyway. diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 7bc23469f4e4..357b149b20d3 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -192,24 +192,39 @@ static const int pipetypes[4] = { }; /** - * usb_urb_ep_type_check - sanity check of endpoint in the given urb - * @urb: urb to be checked + * usb_pipe_type_check - sanity check of a specific pipe for a usb device + * @dev: struct usb_device to be checked + * @pipe: pipe to check * * This performs a light-weight sanity check for the endpoint in the - * given urb. It returns 0 if the urb contains a valid endpoint, otherwise - * a negative error code. + * given usb device. It returns 0 if the pipe is valid for the specific usb + * device, otherwise a negative error code. */ -int usb_urb_ep_type_check(const struct urb *urb) +int usb_pipe_type_check(struct usb_device *dev, unsigned int pipe) { const struct usb_host_endpoint *ep; - ep = usb_pipe_endpoint(urb->dev, urb->pipe); + ep = usb_pipe_endpoint(dev, pipe); if (!ep) return -EINVAL; - if (usb_pipetype(urb->pipe) != pipetypes[usb_endpoint_type(&ep->desc)]) + if (usb_pipetype(pipe) != pipetypes[usb_endpoint_type(&ep->desc)]) return -EINVAL; return 0; } +EXPORT_SYMBOL_GPL(usb_pipe_type_check); + +/** + * usb_urb_ep_type_check - sanity check of endpoint in the given urb + * @urb: urb to be checked + * + * This performs a light-weight sanity check for the endpoint in the + * given urb. It returns 0 if the urb contains a valid endpoint, otherwise + * a negative error code. + */ +int usb_urb_ep_type_check(const struct urb *urb) +{ + return usb_pipe_type_check(urb->dev, urb->pipe); +} EXPORT_SYMBOL_GPL(usb_urb_ep_type_check); /** @@ -474,7 +489,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) */ /* Check that the pipe's type matches the endpoint's type */ - if (usb_urb_ep_type_check(urb)) + if (usb_pipe_type_check(urb->dev, urb->pipe)) dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n", usb_pipetype(urb->pipe), pipetypes[xfertype]); @@ -772,11 +787,12 @@ void usb_block_urb(struct urb *urb) EXPORT_SYMBOL_GPL(usb_block_urb); /** - * usb_kill_anchored_urbs - cancel transfer requests en masse + * usb_kill_anchored_urbs - kill all URBs associated with an anchor * @anchor: anchor the requests are bound to * - * this allows all outstanding URBs to be killed starting - * from the back of the queue + * This kills all outstanding URBs starting from the back of the queue, + * with guarantee that no completer callbacks will take place from the + * anchor after this function returns. * * This routine should not be called by a driver after its disconnect * method has returned. @@ -784,20 +800,26 @@ EXPORT_SYMBOL_GPL(usb_block_urb); void usb_kill_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; + int surely_empty; - spin_lock_irq(&anchor->lock); - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - /* we must make sure the URB isn't freed before we kill it*/ - usb_get_urb(victim); - spin_unlock_irq(&anchor->lock); - /* this will unanchor the URB */ - usb_kill_urb(victim); - usb_put_urb(victim); + do { spin_lock_irq(&anchor->lock); - } - spin_unlock_irq(&anchor->lock); + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + /* make sure the URB isn't freed before we kill it */ + usb_get_urb(victim); + spin_unlock_irq(&anchor->lock); + /* this will unanchor the URB */ + usb_kill_urb(victim); + usb_put_urb(victim); + spin_lock_irq(&anchor->lock); + } + surely_empty = usb_anchor_check_wakeup(anchor); + + spin_unlock_irq(&anchor->lock); + cpu_relax(); + } while (!surely_empty); } EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs); @@ -816,21 +838,27 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs); void usb_poison_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; + int surely_empty; - spin_lock_irq(&anchor->lock); - anchor->poisoned = 1; - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - /* we must make sure the URB isn't freed before we kill it*/ - usb_get_urb(victim); - spin_unlock_irq(&anchor->lock); - /* this will unanchor the URB */ - usb_poison_urb(victim); - usb_put_urb(victim); + do { spin_lock_irq(&anchor->lock); - } - spin_unlock_irq(&anchor->lock); + anchor->poisoned = 1; + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + /* make sure the URB isn't freed before we kill it */ + usb_get_urb(victim); + spin_unlock_irq(&anchor->lock); + /* this will unanchor the URB */ + usb_poison_urb(victim); + usb_put_urb(victim); + spin_lock_irq(&anchor->lock); + } + surely_empty = usb_anchor_check_wakeup(anchor); + + spin_unlock_irq(&anchor->lock); + cpu_relax(); + } while (!surely_empty); } EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs); @@ -970,14 +998,20 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; unsigned long flags; + int surely_empty; + + do { + spin_lock_irqsave(&anchor->lock, flags); + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + __usb_unanchor_urb(victim, anchor); + } + surely_empty = usb_anchor_check_wakeup(anchor); - spin_lock_irqsave(&anchor->lock, flags); - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - __usb_unanchor_urb(victim, anchor); - } - spin_unlock_irqrestore(&anchor->lock, flags); + spin_unlock_irqrestore(&anchor->lock, flags); + cpu_relax(); + } while (!surely_empty); } EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 98e7d1ee63dc..c893f54a3420 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -191,7 +191,6 @@ extern const struct attribute_group *usb_interface_groups[]; extern struct usb_driver usbfs_driver; extern const struct file_operations usbfs_devices_fops; extern const struct file_operations usbdev_file_operations; -extern void usbfs_conn_disc_event(void); extern int usb_devio_init(void); extern void usb_devio_cleanup(void); |