summaryrefslogtreecommitdiff
path: root/drivers/scsi/qlogicfas408.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qlogicfas408.c')
-rw-r--r--drivers/scsi/qlogicfas408.c637
1 files changed, 637 insertions, 0 deletions
diff --git a/drivers/scsi/qlogicfas408.c b/drivers/scsi/qlogicfas408.c
new file mode 100644
index 000000000000..5b6ce0a88f08
--- /dev/null
+++ b/drivers/scsi/qlogicfas408.c
@@ -0,0 +1,637 @@
+/*----------------------------------------------------------------*/
+/*
+ Qlogic linux driver - work in progress. No Warranty express or implied.
+ Use at your own risk. Support Tort Reform so you won't have to read all
+ these silly disclaimers.
+
+ Copyright 1994, Tom Zerucha.
+ tz@execpc.com
+
+ Additional Code, and much appreciated help by
+ Michael A. Griffith
+ grif@cs.ucr.edu
+
+ Thanks to Eric Youngdale and Dave Hinds for loadable module and PCMCIA
+ help respectively, and for suffering through my foolishness during the
+ debugging process.
+
+ Reference Qlogic FAS408 Technical Manual, 53408-510-00A, May 10, 1994
+ (you can reference it, but it is incomplete and inaccurate in places)
+
+ Version 0.46 1/30/97 - kernel 1.2.0+
+
+ Functions as standalone, loadable, and PCMCIA driver, the latter from
+ Dave Hinds' PCMCIA package.
+
+ Cleaned up 26/10/2002 by Alan Cox <alan@redhat.com> as part of the 2.5
+ SCSI driver cleanup and audit. This driver still needs work on the
+ following
+ - Non terminating hardware waits
+ - Some layering violations with its pcmcia stub
+
+ Redistributable under terms of the GNU General Public License
+
+ For the avoidance of doubt the "preferred form" of this code is one which
+ is in an open non patent encumbered format. Where cryptographic key signing
+ forms part of the process of creating an executable the information
+ including keys needed to generate an equivalently functional executable
+ are deemed to be part of the source code.
+
+*/
+
+#include <linux/module.h>
+#include <linux/blkdev.h> /* to get disk capacity */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/proc_fs.h>
+#include <linux/unistd.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "qlogicfas408.h"
+
+/*----------------------------------------------------------------*/
+static int qlcfg5 = (XTALFREQ << 5); /* 15625/512 */
+static int qlcfg6 = SYNCXFRPD;
+static int qlcfg7 = SYNCOFFST;
+static int qlcfg8 = (SLOWCABLE << 7) | (QL_ENABLE_PARITY << 4);
+static int qlcfg9 = ((XTALFREQ + 4) / 5);
+static int qlcfgc = (FASTCLK << 3) | (FASTSCSI << 4);
+
+/*----------------------------------------------------------------*/
+
+/*----------------------------------------------------------------*/
+/* local functions */
+/*----------------------------------------------------------------*/
+
+/* error recovery - reset everything */
+
+static void ql_zap(struct qlogicfas408_priv *priv)
+{
+ int x;
+ int qbase = priv->qbase;
+ int int_type = priv->int_type;
+
+ x = inb(qbase + 0xd);
+ REG0;
+ outb(3, qbase + 3); /* reset SCSI */
+ outb(2, qbase + 3); /* reset chip */
+ if (x & 0x80)
+ REG1;
+}
+
+/*
+ * Do a pseudo-dma tranfer
+ */
+
+static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request, int reqlen)
+{
+ int j;
+ int qbase = priv->qbase;
+ j = 0;
+ if (phase & 1) { /* in */
+#if QL_TURBO_PDMA
+ rtrc(4)
+ /* empty fifo in large chunks */
+ if (reqlen >= 128 && (inb(qbase + 8) & 2)) { /* full */
+ insl(qbase + 4, request, 32);
+ reqlen -= 128;
+ request += 128;
+ }
+ while (reqlen >= 84 && !(j & 0xc0)) /* 2/3 */
+ if ((j = inb(qbase + 8)) & 4)
+ {
+ insl(qbase + 4, request, 21);
+ reqlen -= 84;
+ request += 84;
+ }
+ if (reqlen >= 44 && (inb(qbase + 8) & 8)) { /* 1/3 */
+ insl(qbase + 4, request, 11);
+ reqlen -= 44;
+ request += 44;
+ }
+#endif
+ /* until both empty and int (or until reclen is 0) */
+ rtrc(7)
+ j = 0;
+ while (reqlen && !((j & 0x10) && (j & 0xc0)))
+ {
+ /* while bytes to receive and not empty */
+ j &= 0xc0;
+ while (reqlen && !((j = inb(qbase + 8)) & 0x10))
+ {
+ *request++ = inb(qbase + 4);
+ reqlen--;
+ }
+ if (j & 0x10)
+ j = inb(qbase + 8);
+
+ }
+ } else { /* out */
+#if QL_TURBO_PDMA
+ rtrc(4)
+ if (reqlen >= 128 && inb(qbase + 8) & 0x10) { /* empty */
+ outsl(qbase + 4, request, 32);
+ reqlen -= 128;
+ request += 128;
+ }
+ while (reqlen >= 84 && !(j & 0xc0)) /* 1/3 */
+ if (!((j = inb(qbase + 8)) & 8)) {
+ outsl(qbase + 4, request, 21);
+ reqlen -= 84;
+ request += 84;
+ }
+ if (reqlen >= 40 && !(inb(qbase + 8) & 4)) { /* 2/3 */
+ outsl(qbase + 4, request, 10);
+ reqlen -= 40;
+ request += 40;
+ }
+#endif
+ /* until full and int (or until reclen is 0) */
+ rtrc(7)
+ j = 0;
+ while (reqlen && !((j & 2) && (j & 0xc0))) {
+ /* while bytes to send and not full */
+ while (reqlen && !((j = inb(qbase + 8)) & 2))
+ {
+ outb(*request++, qbase + 4);
+ reqlen--;
+ }
+ if (j & 2)
+ j = inb(qbase + 8);
+ }
+ }
+ /* maybe return reqlen */
+ return inb(qbase + 8) & 0xc0;
+}
+
+/*
+ * Wait for interrupt flag (polled - not real hardware interrupt)
+ */
+
+static int ql_wai(struct qlogicfas408_priv *priv)
+{
+ int k;
+ int qbase = priv->qbase;
+ unsigned long i;
+
+ k = 0;
+ i = jiffies + WATCHDOG;
+ while (time_before(jiffies, i) && !priv->qabort &&
+ !((k = inb(qbase + 4)) & 0xe0)) {
+ barrier();
+ cpu_relax();
+ }
+ if (time_after_eq(jiffies, i))
+ return (DID_TIME_OUT);
+ if (priv->qabort)
+ return (priv->qabort == 1 ? DID_ABORT : DID_RESET);
+ if (k & 0x60)
+ ql_zap(priv);
+ if (k & 0x20)
+ return (DID_PARITY);
+ if (k & 0x40)
+ return (DID_ERROR);
+ return 0;
+}
+
+/*
+ * Initiate scsi command - queueing handler
+ * caller must hold host lock
+ */
+
+static void ql_icmd(Scsi_Cmnd * cmd)
+{
+ struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
+ int qbase = priv->qbase;
+ int int_type = priv->int_type;
+ unsigned int i;
+
+ priv->qabort = 0;
+
+ REG0;
+ /* clearing of interrupts and the fifo is needed */
+
+ inb(qbase + 5); /* clear interrupts */
+ if (inb(qbase + 5)) /* if still interrupting */
+ outb(2, qbase + 3); /* reset chip */
+ else if (inb(qbase + 7) & 0x1f)
+ outb(1, qbase + 3); /* clear fifo */
+ while (inb(qbase + 5)); /* clear ints */
+ REG1;
+ outb(1, qbase + 8); /* set for PIO pseudo DMA */
+ outb(0, qbase + 0xb); /* disable ints */
+ inb(qbase + 8); /* clear int bits */
+ REG0;
+ outb(0x40, qbase + 0xb); /* enable features */
+
+ /* configurables */
+ outb(qlcfgc, qbase + 0xc);
+ /* config: no reset interrupt, (initiator) bus id */
+ outb(0x40 | qlcfg8 | priv->qinitid, qbase + 8);
+ outb(qlcfg7, qbase + 7);
+ outb(qlcfg6, qbase + 6);
+ /**/ outb(qlcfg5, qbase + 5); /* select timer */
+ outb(qlcfg9 & 7, qbase + 9); /* prescaler */
+/* outb(0x99, qbase + 5); */
+ outb(cmd->device->id, qbase + 4);
+
+ for (i = 0; i < cmd->cmd_len; i++)
+ outb(cmd->cmnd[i], qbase + 2);
+
+ priv->qlcmd = cmd;
+ outb(0x41, qbase + 3); /* select and send command */
+}
+
+/*
+ * Process scsi command - usually after interrupt
+ */
+
+static unsigned int ql_pcmd(Scsi_Cmnd * cmd)
+{
+ unsigned int i, j;
+ unsigned long k;
+ unsigned int result; /* ultimate return result */
+ unsigned int status; /* scsi returned status */
+ unsigned int message; /* scsi returned message */
+ unsigned int phase; /* recorded scsi phase */
+ unsigned int reqlen; /* total length of transfer */
+ struct scatterlist *sglist; /* scatter-gather list pointer */
+ unsigned int sgcount; /* sg counter */
+ char *buf;
+ struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
+ int qbase = priv->qbase;
+ int int_type = priv->int_type;
+
+ rtrc(1)
+ j = inb(qbase + 6);
+ i = inb(qbase + 5);
+ if (i == 0x20) {
+ return (DID_NO_CONNECT << 16);
+ }
+ i |= inb(qbase + 5); /* the 0x10 bit can be set after the 0x08 */
+ if (i != 0x18) {
+ printk(KERN_ERR "Ql:Bad Interrupt status:%02x\n", i);
+ ql_zap(priv);
+ return (DID_BAD_INTR << 16);
+ }
+ j &= 7; /* j = inb( qbase + 7 ) >> 5; */
+
+ /* correct status is supposed to be step 4 */
+ /* it sometimes returns step 3 but with 0 bytes left to send */
+ /* We can try stuffing the FIFO with the max each time, but we will get a
+ sequence of 3 if any bytes are left (but we do flush the FIFO anyway */
+
+ if (j != 3 && j != 4) {
+ printk(KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n",
+ j, i, inb(qbase + 7) & 0x1f);
+ ql_zap(priv);
+ return (DID_ERROR << 16);
+ }
+ result = DID_OK;
+ if (inb(qbase + 7) & 0x1f) /* if some bytes in fifo */
+ outb(1, qbase + 3); /* clear fifo */
+ /* note that request_bufflen is the total xfer size when sg is used */
+ reqlen = cmd->request_bufflen;
+ /* note that it won't work if transfers > 16M are requested */
+ if (reqlen && !((phase = inb(qbase + 4)) & 6)) { /* data phase */
+ rtrc(2)
+ outb(reqlen, qbase); /* low-mid xfer cnt */
+ outb(reqlen >> 8, qbase + 1); /* low-mid xfer cnt */
+ outb(reqlen >> 16, qbase + 0xe); /* high xfer cnt */
+ outb(0x90, qbase + 3); /* command do xfer */
+ /* PIO pseudo DMA to buffer or sglist */
+ REG1;
+ if (!cmd->use_sg)
+ ql_pdma(priv, phase, cmd->request_buffer,
+ cmd->request_bufflen);
+ else {
+ sgcount = cmd->use_sg;
+ sglist = cmd->request_buffer;
+ while (sgcount--) {
+ if (priv->qabort) {
+ REG0;
+ return ((priv->qabort == 1 ?
+ DID_ABORT : DID_RESET) << 16);
+ }
+ buf = page_address(sglist->page) + sglist->offset;
+ if (ql_pdma(priv, phase, buf, sglist->length))
+ break;
+ sglist++;
+ }
+ }
+ REG0;
+ rtrc(2)
+ /*
+ * Wait for irq (split into second state of irq handler
+ * if this can take time)
+ */
+ if ((k = ql_wai(priv)))
+ return (k << 16);
+ k = inb(qbase + 5); /* should be 0x10, bus service */
+ }
+
+ /*
+ * Enter Status (and Message In) Phase
+ */
+
+ k = jiffies + WATCHDOG;
+
+ while (time_before(jiffies, k) && !priv->qabort &&
+ !(inb(qbase + 4) & 6))
+ cpu_relax(); /* wait for status phase */
+
+ if (time_after_eq(jiffies, k)) {
+ ql_zap(priv);
+ return (DID_TIME_OUT << 16);
+ }
+
+ /* FIXME: timeout ?? */
+ while (inb(qbase + 5))
+ cpu_relax(); /* clear pending ints */
+
+ if (priv->qabort)
+ return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
+
+ outb(0x11, qbase + 3); /* get status and message */
+ if ((k = ql_wai(priv)))
+ return (k << 16);
+ i = inb(qbase + 5); /* get chip irq stat */
+ j = inb(qbase + 7) & 0x1f; /* and bytes rec'd */
+ status = inb(qbase + 2);
+ message = inb(qbase + 2);
+
+ /*
+ * Should get function complete int if Status and message, else
+ * bus serv if only status
+ */
+ if (!((i == 8 && j == 2) || (i == 0x10 && j == 1))) {
+ printk(KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j);
+ result = DID_ERROR;
+ }
+ outb(0x12, qbase + 3); /* done, disconnect */
+ rtrc(1)
+ if ((k = ql_wai(priv)))
+ return (k << 16);
+
+ /*
+ * Should get bus service interrupt and disconnect interrupt
+ */
+
+ i = inb(qbase + 5); /* should be bus service */
+ while (!priv->qabort && ((i & 0x20) != 0x20)) {
+ barrier();
+ cpu_relax();
+ i |= inb(qbase + 5);
+ }
+ rtrc(0)
+
+ if (priv->qabort)
+ return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
+
+ return (result << 16) | (message << 8) | (status & STATUS_MASK);
+}
+
+/*
+ * Interrupt handler
+ */
+
+static void ql_ihandl(int irq, void *dev_id, struct pt_regs *regs)
+{
+ Scsi_Cmnd *icmd;
+ struct Scsi_Host *host = (struct Scsi_Host *)dev_id;
+ struct qlogicfas408_priv *priv = get_priv_by_host(host);
+ int qbase = priv->qbase;
+ REG0;
+
+ if (!(inb(qbase + 4) & 0x80)) /* false alarm? */
+ return;
+
+ if (priv->qlcmd == NULL) { /* no command to process? */
+ int i;
+ i = 16;
+ while (i-- && inb(qbase + 5)); /* maybe also ql_zap() */
+ return;
+ }
+ icmd = priv->qlcmd;
+ icmd->result = ql_pcmd(icmd);
+ priv->qlcmd = NULL;
+ /*
+ * If result is CHECK CONDITION done calls qcommand to request
+ * sense
+ */
+ (icmd->scsi_done) (icmd);
+}
+
+irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long flags;
+ struct Scsi_Host *host = dev_id;
+
+ spin_lock_irqsave(host->host_lock, flags);
+ ql_ihandl(irq, dev_id, regs);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Queued command
+ */
+
+int qlogicfas408_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+{
+ struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
+ if (cmd->device->id == priv->qinitid) {
+ cmd->result = DID_BAD_TARGET << 16;
+ done(cmd);
+ return 0;
+ }
+
+ cmd->scsi_done = done;
+ /* wait for the last command's interrupt to finish */
+ while (priv->qlcmd != NULL) {
+ barrier();
+ cpu_relax();
+ }
+ ql_icmd(cmd);
+ return 0;
+}
+
+/*
+ * Return bios parameters
+ */
+
+int qlogicfas408_biosparam(struct scsi_device * disk,
+ struct block_device *dev,
+ sector_t capacity, int ip[])
+{
+/* This should mimic the DOS Qlogic driver's behavior exactly */
+ ip[0] = 0x40;
+ ip[1] = 0x20;
+ ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);
+ if (ip[2] > 1024) {
+ ip[0] = 0xff;
+ ip[1] = 0x3f;
+ ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);
+#if 0
+ if (ip[2] > 1023)
+ ip[2] = 1023;
+#endif
+ }
+ return 0;
+}
+
+/*
+ * Abort a command in progress
+ */
+
+int qlogicfas408_abort(Scsi_Cmnd * cmd)
+{
+ struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
+ priv->qabort = 1;
+ ql_zap(priv);
+ return SUCCESS;
+}
+
+/*
+ * Reset SCSI bus
+ * FIXME: This function is invoked with cmd = NULL directly by
+ * the PCMCIA qlogic_stub code. This wants fixing
+ */
+
+int qlogicfas408_bus_reset(Scsi_Cmnd * cmd)
+{
+ struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
+ priv->qabort = 2;
+ ql_zap(priv);
+ return SUCCESS;
+}
+
+/*
+ * Reset SCSI host controller
+ */
+
+int qlogicfas408_host_reset(Scsi_Cmnd * cmd)
+{
+ return FAILED;
+}
+
+/*
+ * Reset SCSI device
+ */
+
+int qlogicfas408_device_reset(Scsi_Cmnd * cmd)
+{
+ return FAILED;
+}
+
+/*
+ * Return info string
+ */
+
+const char *qlogicfas408_info(struct Scsi_Host *host)
+{
+ struct qlogicfas408_priv *priv = get_priv_by_host(host);
+ return priv->qinfo;
+}
+
+/*
+ * Get type of chip
+ */
+
+int qlogicfas408_get_chip_type(int qbase, int int_type)
+{
+ REG1;
+ return inb(qbase + 0xe) & 0xf8;
+}
+
+/*
+ * Perform initialization tasks
+ */
+
+void qlogicfas408_setup(int qbase, int id, int int_type)
+{
+ outb(1, qbase + 8); /* set for PIO pseudo DMA */
+ REG0;
+ outb(0x40 | qlcfg8 | id, qbase + 8); /* (ini) bus id, disable scsi rst */
+ outb(qlcfg5, qbase + 5); /* select timer */
+ outb(qlcfg9, qbase + 9); /* prescaler */
+
+#if QL_RESET_AT_START
+ outb(3, qbase + 3);
+
+ REG1;
+ /* FIXME: timeout */
+ while (inb(qbase + 0xf) & 4)
+ cpu_relax();
+
+ REG0;
+#endif
+}
+
+/*
+ * Checks if this is a QLogic FAS 408
+ */
+
+int qlogicfas408_detect(int qbase, int int_type)
+{
+ REG1;
+ return (((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7) &&
+ ((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7));
+}
+
+/*
+ * Disable interrupts
+ */
+
+void qlogicfas408_disable_ints(struct qlogicfas408_priv *priv)
+{
+ int qbase = priv->qbase;
+ int int_type = priv->int_type;
+
+ REG1;
+ outb(0, qbase + 0xb); /* disable ints */
+}
+
+/*
+ * Init and exit functions
+ */
+
+static int __init qlogicfas408_init(void)
+{
+ return 0;
+}
+
+static void __exit qlogicfas408_exit(void)
+{
+
+}
+
+MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
+MODULE_DESCRIPTION("Driver for the Qlogic FAS SCSI controllers");
+MODULE_LICENSE("GPL");
+module_init(qlogicfas408_init);
+module_exit(qlogicfas408_exit);
+
+EXPORT_SYMBOL(qlogicfas408_info);
+EXPORT_SYMBOL(qlogicfas408_queuecommand);
+EXPORT_SYMBOL(qlogicfas408_abort);
+EXPORT_SYMBOL(qlogicfas408_bus_reset);
+EXPORT_SYMBOL(qlogicfas408_device_reset);
+EXPORT_SYMBOL(qlogicfas408_host_reset);
+EXPORT_SYMBOL(qlogicfas408_biosparam);
+EXPORT_SYMBOL(qlogicfas408_ihandl);
+EXPORT_SYMBOL(qlogicfas408_get_chip_type);
+EXPORT_SYMBOL(qlogicfas408_setup);
+EXPORT_SYMBOL(qlogicfas408_detect);
+EXPORT_SYMBOL(qlogicfas408_disable_ints);
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 09:27:23 +0000